Database Develop

MultiRom v33 for Meizu PRO5

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction
This is Tassadar's MultiROM, a multi-boot solution, port for Meizu PRO5. The main part of MultiROM is a boot manager, which appears every time your device starts and lets you choose ROM to boot. ROMs are installed and managed via modified TWRP recovery. You can use standard ZIP files to install secondary Android ROMs and MultiROM even has its own installer system, which can be used to ship other Linux-based systems.
Features:
* Multiboot any number of Android ROMs
* Restore nandroid backup as secondary ROM
* Boot from USB drive attached via USB-C OTG cable
Warning!
It _is_ dangerous. This whole thing is basically one giant hack - none of these systems are made with multibooting in mind. It is no longer messing with data partition or boot sector, but it is possible that something goes wrong and you will have to flash factory images again. Make backups. Always.
Installation
Prerequisites
Your device must not be encrypted and crDroidAndroid-7.1.1 build started from 20161218 should be installed as primary ROM (because it has kexec-hardboot enabled kernel).
MultiROM has 2 parts you need to install:
Modified recovery - download the ZIP or IMG file and flash it using current (TWRP) recovery or fastboot or Flashify app.
MultiROM - download the ZIP file and flash it in recovery.
You current rom will not be erased by the installation.
Adding ROMs
Go to recovery, switch to MultiROM menu (button at the top right corner ) and tap "Add ROM". Select the ROM's zip file and confirm. As for the space, clean installation of Flyme 5.x after first boot takes 1.9GB+ of space.
Updating/changing ROMs
1. Primary ROM (Internal)
Flash ROM's ZIP file as usual, do factory reset if needed (it won't erase secondary ROMs)
Go to MultiROM in recovery and do Inject curr. boot sector.
2. Secondary Android ROMs
If you want to change the ROM, delete it and add new one. To update ROM, follow these steps:
Go to MultiROM -> List ROMs and select the ROM you want to update.
Select "Flash ZIP" and flash ROM's ZIP file.
Sources
https://github.com/faust93

is it possible to install ubuntu touch as secondary rom ?

wow!!!!...Incredible!!
Thanks so much @faust93 !!

Hi, @faust93 I installed it but I have problems with Secondary rom .
Ater I flashed TWRP-3.0.2-multirom_m86 and multirom-m86 I tried to install flyme 5 as Secondary rom .It boot but I cant hear sound when using earphones.
Another problem is that when using nandroid backup install on Secondary rom does not work properly,it does not boot.
Another thing ,How I can uninstall multirom .I cant find a uninstall zip.

or965 said:
Hi, @faust93 I installed it but I have problems with Secondary rom .
Ater I flashed TWRP-3.0.2-multirom_m86 and multirom-m86 I tried to install flyme 5 as Secondary rom .It boot but I cant hear sound when using earphones.
Another problem is that when using nandroid backup install on Secondary rom does not work properly,it does not boot.
Another thing ,How I can uninstall multirom .I cant find a uninstall zip.
Click to expand...
Click to collapse
I have the same problem, both with secondaries Flyme 6 beta and flyme 5.1.12.G
Bluetooth earphones works ok, but 3.5 jack earphones not.
I have also that issue "Another problem is that when using nandroid backup install on Secondary rom does not work properly,it does not boot."

crDroid must be kept as primary ROM?

Why this great feature had not any attention on it? wodering.
Yes,
crdroid in first order.
flyme roms audio jack is not working.

Hi, faust93 you still didn't answer to my reply
"Hi, @faust93 I installed it but I have problems with Secondary rom .
Ater I flashed TWRP-3.0.2-multirom_m86 and multirom-m86 I tried to install flyme 5 as Secondary rom .It boot but I cant hear sound when using earphones.
Another problem is that when using nandroid backup install on Secondary rom does not work properly,it does not boot.
Another thing ,How I can uninstall multirom .I cant find a uninstall zip."
I do not want to hurry you but I will appreciate if you can provide a way to uninstall it.

or965 said:
Hi, faust93 you still didn't answer to my reply
"Hi, @faust93 I installed it but I have problems with Secondary rom .
Ater I flashed TWRP-3.0.2-multirom_m86 and multirom-m86 I tried to install flyme 5 as Secondary rom .It boot but I cant hear sound when using earphones.
Another problem is that when using nandroid backup install on Secondary rom does not work properly,it does not boot.
Another thing ,How I can uninstall multirom .I cant find a uninstall zip."
I do not want to hurry you but I will appreciate if you can provide a way to uninstall it.
Click to expand...
Click to collapse
Hi,
Yes there is a bug with headphones on secondary flyme rom. I cant hear sound too.
If the secondary rom is crdroid you must remove boot.img to boot it.
To uninstall - just reflash primary rom (uncheck Inject multirom.. check box first) and remove multirom folder from sdcard.

@faust93
The version of crdroid you say you must have in order to install MultiROM is no longer available in your repository. Does this mean that the last version should also work?

markos365 said:
@faust93
The version of crdroid you say you must have in order to install MultiROM is no longer available in your repository. Does this mean that the last version should also work?
Click to expand...
Click to collapse
Yes

thanks faust93! this is the greatest thing ever happen on Pro5! really appreciate your effort!
1 quick question, if i flash the stock Pro 5 stable firmware as 2nd rom, do i need to remove the BL and recovery file in update. zip first?
or i can flash it whole thing directly?
i asked so because i worry it may override my twrp if flash it directly
thanks again!

rickylcp said:
thanks faust93! this is the greatest thing ever happen on Pro5! really appreciate your effort!
1 quick question, if i flash the stock Pro 5 stable firmware as 2nd rom, do i need to remove the BL and recovery file in update. zip first?
or i can flash it whole thing directly?
i asked so because i worry it may override my twrp if flash it directly
thanks again!
Click to expand...
Click to collapse
i'm NOT sure, but i think that is not needed to do so.

Mollic said:
i'm NOT sure, but i think that is not needed to do so.
Click to expand...
Click to collapse
You're right. No need to remove by hands because those partitions are not flashed actually while installing as multirom 2nd rom.

@faust93 this is compatible with RR rom built by u or just CC droid roms only?

pippideniro said:
@faust93 this is compatible with RR rom built by u or just CC droid roms only?
Click to expand...
Click to collapse
Yes I have latest RR flashed as a primary rom!
As for the headphones in Flyme rom, you can try following commands in Terminal (root required):
su
cd /system/bin/; ./tinymix -D 1 16 1; ./tinymix -D 1 13 1
The downside is that you'll have to issue these commands everytime you plug in your headphones (you can try to use Tasker or similar app to automate the process). Another issue is that some report that DAC is not working.

mrsocky said:
Yes I have latest RR flashed as a primary rom!
Click to expand...
Click to collapse
How about the secondary rom, does calls work properly for u without issues?
Sent from my PRO 5 using Tapatalk

pippideniro said:
How about the secondary rom, does calls work properly for u without issues?
Sent from my PRO 5 using Tapatalk
Click to expand...
Click to collapse
Haven't tryed out Flyme as a secondary Rom yet, as I'm more than happy with my RR (7.1.2)!
But as I write, the latest Flyme 6 beta is downloading and I'll report as soon as I find out.

mrsocky said:
Haven't tryed out Flyme as a secondary Rom yet, as I'm more than happy with my RR (7.1.2)!
But as I write, the latest Flyme 6 beta is downloading and I'll report as soon as I find out.
Click to expand...
Click to collapse
Okay awaiting for feedback then[emoji106]
Sent from my PRO 5 using Tapatalk

first rom is rr7.1.2，second is the offical latest stock rom 7.3.0 ，but it cant into system

[Guide][Gsi]HOWTO flash any gsi with redmi 6 pro (sakura)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
* Disclaimer :
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you blame me in any way for what happens to your device, I will laugh at you.
* BOOM! goes the dynamite​
PLEASE READ CAREFULLY TO AVOID PROBLEMS
First of all u need an unlocked bootloader guide
Second of all u need adb fastboot
third of all u need is TWRP (works same with unofficial redwolf recovery)
here is a list of all gsi (for redmi 6 pro we need arm64 Aonly) all android 9 gsi support the notch
1. im on stock 8.9.20 !!! BUT ALWAYS USE LATEST FASTBOOT ROM BECOUSE OF ANTIROLLBACK!!! miflash link
2. then i reboot the device into fastboot mode (volume down + power, or adb command: adb reboot bootloader), and boot into twrp dont install it , with the command
Code:
fastboot boot twrpname.img
3. next step is to wipe data , write yes and format it.
4. then install globerom from here with magisk with expert settings https://mi-globe.com/rom-builder-features/?codename=sakura&img=redmi6pro.png&realname=RedMi+6+Pro with the LOADED TWRP (expert settings howto)
5. Then the device will boot into miui mi_globerom (can take alsmost 15-20mins, no joke) just wait until it hast booted.
6. then reboot into fastboot mode and again BOOT TWRP with
Code:
fastboot boot twrpname.img
7. wipe data again (write yes in twrp) like in step 3
8. then install the gsi image to system partition
9. reboot into system swipe yes if twrp says no system installed , and u will boot into the gsi of your choice,
10. then reboot into fastboot mode , boot twrp again with command:
Code:
fastboot boot twrpname.img
11. then finally install twrp image from your phone with the booted twrp . (dont forget to install img. not zip)
12. boot into installed twrp, install gapps, make a factory reset swipe, and boot into rom and make initial rom setup.
13. for magisk, again boot into twrp and flash,magisk , then reboot
for testing other gsi, 1. goto twrp, 2. wipe, 3. advanced wipe, and just wipe: system , chache, dalivik chache, and data , and install the next gsi to system partition
to revert back to stock flash fastboot rom (like this so u dont relock the bootloader) with miflash DONT RELOCK BOOTLOADER http://bigota.d.miui.com/8.9.20/sakura_images_8.9.20_20180920.0000.00_8.1_cn_840c43e70e.tgz !!!!BUT ALWAYS USE LATEST FASTBOOT ROM BECOUSE OF ANTIROLLBACK!!!!!
have fun and consider join us on telegram https://t.me/redmi6proofficial

placeholder

Looks like i got some questions for ya...
first, cant we use a normal developer rom issued by xiaomi and then flash magisk?
second, in 'fastboot boot twrpname.img' the "twrpname" is a variable right?
third, you did all the starting steps(untill loading the gsi) using remote twrp boot( just made the phrase myself), why not flash the image from the start? will something be different?(like system crash or phone bricking)
fourth, In the start you told "then i reboot the device into fastboot mode (volume down + power, or adb command: adb reboot bootloader), and boot into twrp dont install it , with the command" from where exactly did you boot the TWRP of? from the phone or your PC? (srry, am not well educated in this method)
fifth, it is irrelevant(not completely) but, will using the recovery rom instead of fastboot brick the user's phone?
sixth, about the gsi roms, you said arm64 A only, will there be a problem with flashing the roms with that A-A/B (partition style{ e.g. Pixel Experience}) and arm-arm64 (architecture{e.g. Pixel Experience})

Astrek said:
Looks like i got some questions for ya...
first, cant we use a normal developer rom issued by xiaomi and then flash magisk?
second, in 'fastboot boot twrpname.img' the "twrpname" is a variable right?
third, you did all the starting steps(untill loading the gsi) using remote twrp boot( just made the phrase myself), why not flash the image from the start? will something be different?(like system crash or phone bricking)
fourth, In the start you told "then i reboot the device into fastboot mode (volume down + power, or adb command: adb reboot bootloader), and boot into twrp dont install it , with the command" from where exactly did you boot the TWRP of? from the phone or your PC? (srry, am not well educated in this method)
fifth, it is irrelevant(not completely) but, will using the recovery rom instead of fastboot brick the user's phone?
sixth, about the gsi roms, you said arm64 A only, will there be a problem with flashing the roms with that A-A/B (partition style{ e.g. Pixel Experience}) and arm-arm64 (architecture{e.g. Pixel Experience})
Click to expand...
Click to collapse
1. i didnt try that to be honest thats the way after so many tries to get it working,.. lost a day of my life and dont wanna do that again to test but its a valid point , will try later and if so edit the guide
2.yes easiest way is to write the command: fastboot boot and then drag and drrop the twrp image in the powershell window so u have the correct filepath
3.yes its like a remote twrp (in fact it doesnt get installed into recovery partition, it runs in your phone memory in backgrround ) becouse it doesnt work to install the twrp since miui doesnt "allow" that and android cant start ..so no u cant install twrp only install like mentioned
4.see above ..the phone boots the twrp
5.i was scared too to hell about bricking: so in short DO NOT INSTALL ANY MIUI VERSION ABOVE THE VERSION U ARE CURRENTLY USING latest now is 8.9.20 ... and 8.9.20 means 20.9.2018 all miui versions are like that so dont downgrade thats all
6.it will not boot thats all , but i would not try it ... its easy, all gsi roms have a Aonly arm64 build so just download that and there are no A-A/B its either A or A/B some times A is called Aonly , and there is arm and arm64 . we need arm64 A
its no problem to ask questions we all where new to this at some point just ask here or with a more quicker respond on the telegram group https://t.me/redmi6proofficial and ask for nofx161

thnx for the help... will root my phone once the MI countdown stops... once again thnx a lot and pls do keep up the good work.. really appreciate it!

Im on global 9.6.4 stable..which one should i download from globe rom?
Also im rooted using magisk..will that pose any problem?

loseyourself said:
Im on global 9.6.4 stable..which one should i download from globe rom?
Also im rooted using magisk..will that pose any problem?
Click to expand...
Click to collapse
there is no global rom for this device for now, only chinese or indian , i would recommend updating to miui 10 by ota or fastboot rom, and if u are on miui 10 u can do the same as stated in the guide above

Can we flash Mi A2 lite's stick Rom turning this ohone into one

AndroidAnand28 said:
Can we flash Mi A2 lite's stick Rom turning this ohone into one
Click to expand...
Click to collapse
NO DONT FLASH MIA2lite ROM , mi A2 lite has a different partiton sceme

nofx161 said:
NO DONT FLASH MIA2lite ROM , mi A2 lite has a different partiton sceme
Click to expand...
Click to collapse
Well then like the Mi 5X to Mi A1, we can't turn our phone to Android One

Is it possible to flash stock unrooted aosp on this device? I'm considering buying but don't want MIUI and need unrooted for corporate device management etc

BazmanFoo said:
Is it possible to flash stock unrooted aosp on this device? I'm considering buying but don't want MIUI and need unrooted for corporate device management etc
Click to expand...
Click to collapse
u can use any gsi, all are without root, only some have a rooted version too so would be no problem, but there is the same device with android one instead of miui, it is called mi a2 lite.

nofx161 said:
u can use any gsi, all are without root, only some have a rooted version too so would be no problem, but there is the same device with android one instead of miui, it is called mi a2 lite.
Click to expand...
Click to collapse
Perfect, thanks mate

I am on MIUI 10(Chinese Stable Version).
Can I skip instilling the global rom?
And…Which step should I do?
---------- Post added at 02:33 AM ---------- Previous post was at 02:23 AM ----------
Can I just flash(not boot) TWRP Recovery then ADVANCED WIPE then install the IMG File then reboot?

Rom Recommendations
Thanks for the guide.
I wanted to ask if you installed any P roms as daily drivers and which of them were the most stable and bug free for day to day use.
TIA

@nofx161
I am currently at v 9.6.5.0 (indian rom) latest version
What is the reason to flash global rom in steps (4 & 5) here in this tutorial?
Sent from my ONEPLUS A5010 using Tapatalk

vistaholylight said:
I am on MIUI 10(Chinese Stable Version).
Can I skip instilling the global rom?
And…Which step should I do?
---------- Post added at 02:33 AM ---------- Previous post was at 02:23 AM ----------
Can I just flash(not boot) TWRP Recovery then ADVANCED WIPE then install the IMG File then reboot?
Click to expand...
Click to collapse
just use the guide and do the same as in the guide there is no other way to get a usable gsi if u dont belive me then just try ,.. u will end up in a bootloop nothing more.

l2o88j said:
@nofx161
I am currently at v 9.6.5.0 (indian rom) latest version
What is the reason to flash global rom in steps (4 & 5) here in this tutorial?
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
i dont know the reason why we need that steps , but i was unable to get a working gsi without those steps

nofx161 said:
just use the guide and do the same as in the guide there is no other way to get a usable gsi if u dont belive me then just try ,.. u will end up in a bootloop nothing more.
Click to expand...
Click to collapse
I know. Thanks!
---------- Post added at 01:21 AM ---------- Previous post was at 12:44 AM ----------
nofx161 said:
just use the guide and do the same as in the guide there is no other way to get a usable gsi if u dont belive me then just try ,.. u will end up in a bootloop nothing more.
Click to expand...
Click to collapse
And I am on MIUI 10.0.5.0 STABLE. Which rom should I flash in step 4?

nofx161 said:
just use the guide and do the same as in the guide there is no other way to get a usable gsi if u dont belive me then just try ,.. u will end up in a bootloop nothing more.
Click to expand...
Click to collapse
And in the guide you said "ALWAYS USE LASTEST FASTBOOT ROM BECAUSE OF ANTIROLLBACK".
What does "fastboot rom" mean?
Is my stable 10.0.5.0(Latest Stable Version ) up to standard?

TWRP[UNOFFICAL]-BETA-BUILD-[12-03-2019]

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Main Highlights
✪ MTP support
✪ Can flash stock os Images
✪ Backup/restore works with any os
✪ Restore your old twrp backup
✪ Optimized and faster
✪ Build On A29 Pre Built Kernel By Realme
✪ Full compatible with color os
ScreenShots
Download Link:
https://mega.nz/#!5gYnjQSB!YhC_ZTHuopwwP50LxTvJ1VOq4zYSfG0LAudWr6gatUA
Code:
Bugs
:GSI Flashing Has Some Issues
:If You Finds Any Other Bug Then Report Me
Credits;
AnuragRai(Developer)
Hamza(Tester)
RK(Tester)
Jatin(Tester)
MKS(RM2p Dev,Always Supported Me)
And Whole Realme Tester Team
XDA:DevDB Information
TWRP[UNOFFICAL]-BETA-BUILD-[12-03-2019], Tool/Utility for the Oppo Realme 1
Contributors
anurag rai, hamza
Version Information
Status: Beta
Current Beta Version: 01
Beta Release Date: 2019-03-12
Created 2019-03-12
Last Updated 2019-03-12

Flashing Guide
Code:
[CENTER]
:adb reboot bootloader
:fastboot flash recovery recoveryname.img
:reboot phone manually ,not from fastboot
:After phone boots up,power off it
:Press Power Button+Volume UP &Down For Approx 20 seconds
:After You Are Inside Of Twrp,do this
:Wipe-Format Data-Yes And reboot manually by power off the device
:And Press Power Button+Volume UP & Down
:Flash Magisk And Reboot [/CENTER]
Caution
Code:
:Never Reboot directly to recovery by adb or fastboot commands as it will cause soft brick,
:always manually reboot

Reserved

Thankyou bro..

Finally we are getting working twrp recovery for rm 1:highfive: keep up the good work mate

anabhi said:
Finally we are getting working twrp recovery for rm 1:highfive: keep up the good work mate
Click to expand...
Click to collapse
Bro can you help me with fixing reboot to recovery issue

anurag rai said:
Flashing Guide
Code:
[CENTER]
:Wipe-Format Data-Yes And reboot manually by power off the device
:And Press Power Button+Volume UP & Down
:Flash Magisk And Reboot [/CENTER]
Caution
Code:
:Never Reboot directly to recovery by adb or fastboot commands as it will cause soft brick,
:always manually reboot
Click to expand...
Click to collapse
After wiping data and turning off. My phone wont boot. I doesnt even show the logo. Please help.

It's Working ! Thanks Alot Mate.:victory:

awesome work bro.. thnks a lot u r too fast..

Why wiping data ? Also if we wipe data then won't it take time to setup the device after that only we could reboot. And I just need to put some some apps into system, I dont want to flash magisk. Can I just boot into recovery once using fastboot boot twrp.img command /

Awesome man!??

svsexodia said:
Why wiping data ? Also if we wipe data then won't it take time to setup the device after that only we could reboot. And I just need to put some some apps into system, I dont want to flash magisk. Can I just boot into recovery once using fastboot boot twrp.img command /
Click to expand...
Click to collapse
Yes you can

manavkush said:
Flashing Guide
Caution
After wiping data and turning off. My phone wont boot. I doesnt even show the logo. Please help.
Click to expand...
Click to collapse
Charge it bro

Realme 1 - Treble Rom
'TREBLE', let's talk about it.
Realme 1 supports treble, we have unlocked bootloader, a working TWRP, and several Treble Roms available, so why haven't anyone tried flashing a Treble Rom yet on Realme 1? Those are the only things we need to flash a Treble Rom on this device right? Am I missing something?
I don't have a backup phone nor do we have official firmware for Realme 1 to recover from soft brick, so I am not willing to risk my device yet. If someone else could do it instead I would appreciate it a lot.
P.S. Someone should start a pinned thread for 'Realme 1 - Treble Roms'

johndoe5 said:
'TREBLE', let's talk about it.
Realme 1 supports treble, we have unlocked bootloader, a working TWRP, and several Treble Roms available, so why haven't anyone tried flashing a Treble Rom yet on Realme 1? Those are the only things we need to flash a Treble Rom on this device right? Am I missing something?
I don't have a backup phone nor do we have official firmware for Realme 1 to recover from soft brick, so I am not willing to risk my device yet. If someone else could do it instead I would appreciate it a lot.
P.S. Someone should start a pinned thread for 'Realme 1 - Treble Roms'
Click to expand...
Click to collapse
I've Flashed Phh's GSI Treble Roms.All Of Em Seems To Work Fine But Volte Is Not Working On Any Of Em So I Had To Switch Back To Stock. I Tested AOSP 9.0,RR 9.0 And Lineage 8.1:silly:

It's_Shawn said:
I've Flashed Phh's GSI Treble Roms.All Of Em Seems To Work Fine But Volte Is Not Working On Any Of Em So I Had To Switch Back To Stock. I Tested AOSP 9.0,RR 9.0 And Lineage 8.1:silly:
Click to expand...
Click to collapse
Which TWRP did you use?
And where can I find the stock firmware?

johndoe5 said:
Which TWRP did you use?
And where can I find the stock firmware?
Click to expand...
Click to collapse
That Time I Didn't Use Any Recovery,I Used Fastboot Commands

Hey I successfully installed TWRP recovery but I didn't flash magisk yet. But even now there is a message in status bar saying "Rooting of your phone has been detected. Tap to fix" and that screen is showing me to install 2.1GB OTA update. Idk what is happening I never faced such thing in any of my earlier phone while twrp flashing . What is this ? Can I install the update ? And why is it showing. Will there be possible bootloops if I install the update or willI I still be having TWRP or stock recovery get flashed. Please answer so i can proceed with my choice.

5s4rnv33r said:
Hey I successfully installed TWRP recovery but I didn't flash magisk yet. But even now there is a message in status bar saying "Rooting of your phone has been detected. Tap to fix" and that screen is showing me to install 2.1GB OTA update. Idk what is happening I never faced such thing in any of my earlier phone while twrp flashing . What is this ? Can I install the update ? And why is it showing. Will there be possible bootloops if I install the update or willI I still be having TWRP or stock recovery get flashed. Please answer so i can proceed with my choice.
Click to expand...
Click to collapse
https://forum.xda-developers.com/re...l-method-root-realme-1-install-t3908030/page3
try the solution written in soham028 's post.
it worked for me and updating os will remove root.

vikas2316 said:
https://forum.xda-developers.com/re...l-method-root-realme-1-install-t3908030/page3
try the solution written in soham028 's post.
it worked for me and updating os will remove root.
Click to expand...
Click to collapse
Updating OS will remove root but will it also remove TWRP ???
One more question I followed all the steps correctly (including wiping data) but from TWRP I can't mount DATA.
---------- Post added at 10:01 PM ---------- Previous post was at 09:13 PM ----------
After wiping data if I just reboot to TWRP recovery then I can mount the DATA but once I have started the phone and set it up then again I boot into TWRP recovery and when I try to mount DATA I am not able to do so. Can't mount /data invalid argument. Please suggest something.

[boot.img] Patched boot.img files & patching tool

Here you can find several patched boot.img files for various stock rom system versions of Redmi 7A.
https://www.mediafire.com/folder/zx0167qqaknc3/Redmi_7a_patched_boot
Note: The one for xiaomi.eu is custom rom, not stock EU.
If you can't find a patched boot.img for your version, you can also patch it yourself with this tool:
http://www.mediafire.com/file/c5e0idf6cy5ap25/patcher.7z/file
(follow instructions in readme file; credits to Russian 4pda forum)

Where i can find xiaomi.eu ROM for this device?

NV-Dev said:
Where i can find xiaomi.eu ROM for this device?
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=4349826312261652844

Can you please upload patched boot for 11.0.2 indian rom???

Can you make a patched boot for the Mokee rom because when I try to patch it with the patcher it has ramdisk error. Can you help me?

anonymousfun122 said:
Can you make a patched boot for the Mokee rom because when I try to patch it with the patcher it has ramdisk error. Can you help me?
Click to expand...
Click to collapse
Here for you
Mokee_boot.img
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Not working for me
Auto Reboot to recovery

It worked
sjcbank said:
Here for you
Mokee_boot.img
Click to expand...
Click to collapse
Thank you so much !!! It worked instantly . I was trying weeks to make magisk working on the mokee rom.
Thank you !!

Hey,
I have MIUI v10.2.6.0.PCMINXM(Indian version), actually I downgraded to this version. Please help me install Mokee on my device. Enlist all the steps I need to take from scratch.
Your prompt response would be really appreciated.

Tenome7 said:
Hey,
I have MIUI v10.2.6.0.PCMINXM(Indian version), actually I downgraded to this version. Please help me install Mokee on my device. Enlist all the steps I need to take from scratch.
Your prompt response would be really appreciated.
Click to expand...
Click to collapse
Any rom version can install mokee. It's very easy, anyone can do it.
I am 60 years old, I am Vietnamese, I do not know English, all instructions are available online, I use Google, Google Chrome and Google translate.

sjcbank said:
Any rom version can install mokee. It's very easy, anyone can do it.
I am 60 years old, I am Vietnamese, I do not know English, all instructions are available online, I use Google, Google Chrome and Google translate.
Click to expand...
Click to collapse
I've been toying around with Android since it's Lollipop versions, rooting them, intalling custom ROMs etc. Probably 6 years. More than 7 devices.
As far as installing a custom ROM on this phone (Redmi 7A) is concerned, the different versions, like Indian, Global have different drivers or HAL's.
So, after successfully booting up into MOKEE OS on my variant 3-4 times, Torch, Audio, Video, Calls...... Nothing worked.
And to be very honest, there was nothing mentioned about this in MOKEE OS thread, as to which version of this device is not compatible with the ROM. The only reason I messed up was because the introduction of GSI ROMs has made the custom ROM creation process easier, but introduced a ****load of work in some devices, and ending up causing trouble.
This was the reason I requested all the steps in the thread so I could verify if I was missing some important step as far as the Indian variant is considered.
But thanks to everyone, I successfully booted Mokee ROM with everything working on my variant, including superuser privileges.
Also I messed up partitions in TWRP, and ended up with only 22gigs of Internal storage available, lol.
Thanks.

Tried @Tenome7 patched boot file for latest nightlly mokee OS 10, it bootloops, patched my own boot file, it still boot loops.
It seems impossible to get magisk working in mokee OS.

Ok I figured it out, AFTER you flash the patched boot.img you need to format the data partition, you'll loose all your data, however the ROM will boot.
I'm running Android 10 mokee os, more stable and no bugs compared to lineage os 17 rom

cg730620 said:
Here you can find several patched boot.img files for various stock rom system versions of Redmi 7A.
Click to expand...
Click to collapse
Hi
Do you have a patched boot.img for my 7A 11.0.18.0 (PCMEUXM) ?
Thanks

axy_david said:
Tried @Tenome7 patched boot file for latest nightlly mokee OS 10, it bootloops, patched my own boot file, it still boot loops.
It seems impossible to get magisk working in mokee OS.
Click to expand...
Click to collapse
Sorry for being so late to reply here. I would suggest using MIUI v10.2.10.0 as the base over which the Mokee OS needs to be installed.
As far as root is concerned, I tried Magisk but it gave me bootloops every time. As an alternative to getting root, I flashed the AddonSU installer which I downloaded from the Mokee Official site. You would just need to find it on the website.
I hope this helps. If you have further doubts, I'll stay a bit more active here. :fingers-crossed:

I want to unroot, but when i choose restore images in magisk manager it says stock backup doesnt exist. I downloaded the patched boot and stock boot.img prior to rooting, i didnt use magisk to patch the stock boot. What do i do now, i want to unroot and install ota on my xiaomi mi a3.

Can anybody help me?
I need the new version of patcher and the creator's website doesn't load me correctly.

Anyone have got pine 11.0.7 global patched boot image??? Cz yaalex patcher is down showing internal error

redmi7a
Hi
carried out
bootfromrecovery.bat - Reboot to recovery, connect to PC, install adb driver and run this file. this will extract boot.img from running phone, patch it on the fly and flash back patched boot.img
..but it didn't happen
* Requires internet connection. (it downloads latest Magisk release during process)
..I still don't have root
someone will help
Thank you

I asked the developer about a similar issue with the downloadable patcher, and he suggested me to try with the online one, which is more up to date.
https://patcher.yaalex.xyz/
romam suchanek said:
Hi
carried out
bootfromrecovery.bat - Reboot to recovery, connect to PC, install adb driver and run this file. this will extract boot.img from running phone, patch it on the fly and flash back patched boot.img
..but it didn't happen
* Requires internet connection. (it downloads latest Magisk release during process)
..I still don't have root
someone will help
Thank you
Click to expand...
Click to collapse

How To Guide [GUIDE]Xiaomi.EU ROMs Flashing Guide All Devices [Windows-Only]

XIAOMI.EU ROMs Flashing Guide:
MIUI 13 (Stable)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements:
First of all unlock bootloader of your device . Search net for more info.
After this install adb drivers from here: https://forum.xda-developers.com/t/...reborn-v2-0-adb-fastboot-and-drivers.3854109/
Choose skip install for adb and install google drivers.
Connect your device in fastboot mode to your pc.
Go into device manager , right click on unrecognized android device , choose update drivers , let me pick from a list of drivers , select adb drivers, android bootloader interface and click install.
Then go to your custom rom download thread and check the date of rom file.
See the date of your rom . Now go to xiaomiformwareupdater.com and select your device. Then click download.
New page will appear. Type fastboot in the searchbar of the page. Now see global rom the date closest to the release of the xiaomi.eu rom and download.
Unzip the rom file to the root of c: drive and connect your device to fastboot mode and double click on flash_all.bat
A cmd window will popup and close after 15-20 min approx when flashing is done.This will delete your data.
Let the device boot into MIUI.
Once it boots power it off . Then press the vol down + power button until fastboot in orange letters appear.
TWRP method:
Follow flashing guide of twrp from here.
Boot into twrp.
Go to wipe and format data.
Then factory reset in wipe.
Do not wipe anything in advanced wipe !
Copy the.eu rom zip file to a fat32 formatted sdcard or usb.
Connect sdcard or usb to device.
Go to install , select storage , sd/usb, select eu rom zip and flash.
Once flashing done , wipe dalvik.
Reboot to system.
Done.
Updating via Updater app: (ROM Type: Recovery)
(A Xiaomi.eu ROM must already be installed on your device)
Download Xiaomi.eu ROM zip file
Copy the ROM zip file to the internal storage
Updater -> Menu (...) -> Select update package
Select the ROM zip file
Confirm any dialogs
Done!
Installing with Fastboot: (ROM Type: Fastboot)
Download Xiaomi.eu ROM zip file
Extract the ROM zip to root of c : drive.
Connect phone ins fastboot to PC via USB cable
Run one of the installation scripts (according to your PC operating system):
- first_install_with_data_format - with data wipe, if you're flashing Xiaomi.eu ROM for the first time or downgrading.
- update_rom - without data wipe, if you're updating from an older Xiaomi.eu ROM.
Done!
Remember:
If you are going from MIUI 13 (or later) Weekly ROM to MIUI 13 Stable ROM, you are doing a downgrade, so format data is mandatory!
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
MIUI 13 (Weekly)
Go to the sourceforge link of the rom and see the date of your rom. In this case it's alioth.
See the date of your rom . Now go to xiaomiformwareupdater.com and select your device. Then click download.
New page will appear. Type fastboot in the searchbar of the page. Now see global rom the date closest to the release of the xiaomi.eu rom and download.
Unzip the rom file to the root of c: drive and connect your device to fastboot mode and double click on flash_all.bat
A cmd window will popup and close after 15-20 min approx when flashing is done.This will delete your data.
Let the device boot into MIUI.
Once it boots power it off . Then press the vol down + power button until fastboot in orange letters appear.
TWRP method:
Follow flashing guide of twrp from here.
Boot into twrp.
Go to wipe and format data.
Then factory reset in wipe.
Do not wipe anything in advanced wipe !
Copy the zip file to a fat32 formatted sdcard or usb.
Connect sdcard or usb to device.
Go to install , select storage , sd/usb, select rom zip and flash.
Once flashing done , wipe dalvik.
Reboot to recovery.
Reboot to system.
Done.
Fastboot:
Unzip rom file to root of c: drive.
Go into folder.
Run fastboot installation script in folder according your PC operating system:
--- For Windows OS - windows_fastboot_update_rom.bat
--- For Linux - linux_fastboot_update_rom.sh
--- For MacOS - macos_fastboot_update_rom.sh
Done.
NOTE FOR ALL:
Make sure to always extract and move the stock rom folder in root of c: drive (this helps avoid flashing errors)The path should look something like this:
C:\spes_global_images_YourVersionhere
Also make sure the same to unzip xiaomi.eu rom folder in the root of c: drive:
C:\xiaomi.eu_multi_HMNote11_YourVersionHere
Then flash Xiaomi.EU according to instructions above.
Alternatively If you want you can flash india , eea , turkey , etc variants of stock rom instead of global , then flash xiaomi.eu according to the instructions above. But keep in mind that the release date of stock rom that you are flashing should be closest to the release date of xiaomi.eu weekly rom.
Must do all the process again if flashing a new rom
If you get a error like this: assert failed _dynamic partitions package_extract_file(dynamic_partitions_op_list) ERROR 1
Then go to the guide here and re do all the steps in the guide and when it comes to flashing twrp, then use twrp 3.6.1 to flash rom then flash twrp 3.7.0 according to the process in guide (if the rom you flashed is a12/a13) or use shrp 3.1 instead of using twrp after re doing all the steps and then flash rom.
If mtp not working or device not getting detected as a portable device in any recovery then watch this guide here: GUIDE
Do not replace the recovery or try to update recovery that comes with roms. This can cause problems such as reboots, apps crashing,etc as recovery is integrated into boot partition in which kernel is also integrated.

Hybrid ROMs: The End of Recovery/Fastboot ROMs
During this Chinese New Year holidays break from building ROMs, we could put some time into research and have developed a new format for our ROMs. We are proud to announce the Hybrid ROMs. Why "Hybrid"? Well, because those ROMs are both Recovery ROMs and Fastboot ROMs, all in the same package...
xiaomi.eu

NOSS8 said:
Hybrid ROMs: The End of Recovery/Fastboot ROMs
During this Chinese New Year holidays break from building ROMs, we could put some time into research and have developed a new format for our ROMs. We are proud to announce the Hybrid ROMs. Why "Hybrid"? Well, because those ROMs are both Recovery ROMs and Fastboot ROMs, all in the same package...
xiaomi.eu
View attachment 5820261
Click to expand...
Click to collapse
Updated ! Thanks !

what is your experience after flashing the ROM. The system eats 18GB of space (is this normal or just my phone?) and I don't know why and even though a lot of spam is going away with this rom there is a lot more

wasteoinc said:
what is your experience after flashing the ROM. The system eats 18GB of space (is this normal or just my phone?) and I don't know why and even though a lot of spam is going away with this rom there is a lot more
Click to expand...
Click to collapse
Did you do a clean flash?

NOSS8 said:
Did you do a clean flash?
Click to expand...
Click to collapse
I think I did, the phone was new and I did a fastboot install of the xiaomi.eu rom
But all this a/b system I don't pretend I get it much

wasteoinc said:
I think I did, the phone was new and I did a fastboot install of the xiaomi.eu rom
But all this a/b system I don't pretend I get it much
Click to expand...
Click to collapse
So you used first install.bat.
I don't have this device but on my 12 pro the system takes 13GB (Xiaomi Eu rom).

Does anybody have a lag issue in the control center? 90Hz feels like 60Hz

NOSS8 said:
Hybrid ROMs: The End of Recovery/Fastboot ROMs
During this Chinese New Year holidays break from building ROMs, we could put some time into research and have developed a new format for our ROMs. We are proud to announce the Hybrid ROMs. Why "Hybrid"? Well, because those ROMs are both Recovery ROMs and Fastboot ROMs, all in the same package...
xiaomi.eu
View attachment 5820261
Click to expand...
Click to collapse
Big woop. I don't want stock MIUI crapola. The whole point of XDA is better choices, not encouragement to return to the stock, bloated, ad-engorged OG software. The whole reason to buy a Snapdragon'd phone is ROMing. This will not make me go back.
EDIT: changed supposed stock MIUI users on XDA (everyone) to proven (me).

Sheist! said:
Big woop. No one, including me, wants stock MIUI crapola. The whole point of XDA is better choices, not encouragement to return to the stock, bloated, ad-engorged OG software. The whole reason to buy a Snapdragon'd phone is ROMing. This will not make me go back.
Click to expand...
Click to collapse
This is your opinion but not that of the 781 users of this version, for example.

Sheist! said:
Big woop. I don't want stock MIUI crapola. The whole point of XDA is better choices, not encouragement to return to the stock, bloated, ad-engorged OG software. The whole reason to buy a Snapdragon'd phone is ROMing. This will not make me go back.
EDIT: changed supposed stock MIUI users on XDA (everyone) to proven (me).
Click to expand...
Click to collapse
I also don't want the xiaomi crap but I also want to use my phone in a usefull way, not having to deal with all the issues other roms introduces.
In my old phone (xiaomi 4x) the miui.eu rom was quite good and you could improve on it by deleting xiaomi system apps that you didn't want to use. I don't know whats the story now, but Im trying to learn.
Somebody said that the A/B partitioning scheme bloats the GB in the system but still 18 seems a lot to me.
Im still a bit scared to flash magisk which is annoying because i really want to root my phone to get rid of ads and stuff

wasteoinc said:
I also don't want the xiaomi crap but I also want to use my phone in a usefull way, not having to deal with all the issues other roms introduces.
In my old phone (xiaomi 4x) the miui.eu rom was quite good and you could improve on it by deleting xiaomi system apps that you didn't want to use. I don't know whats the story now, but Im trying to learn.
Somebody said that the A/B partitioning scheme bloats the GB in the system but still 18 seems a lot to me.
Im still a bit scared to flash magisk which is annoying because i really want to root my phone to get rid of ads and stuff
Click to expand...
Click to collapse
Why are you scared to flash magisk ?
Btw , are you getting issues in which your device randomly reboots (with animation) sometimes and apps crash unnecessarily ?
I have no nfc Indian 6 64 variant and I get this issue in all .eu roms for my device .
These issues are nowhere to be found in other custom roms .

wasteoinc said:
I also don't want the xiaomi crap but I also want to use my phone in a usefull way, not having to deal with all the issues other roms introduces.
In my old phone (xiaomi 4x) the miui.eu rom was quite good and you could improve on it by deleting xiaomi system apps that you didn't want to use. I don't know whats the story now, but Im trying to learn.
Somebody said that the A/B partitioning scheme bloats the GB in the system but still 18 seems a lot to me.
Im still a bit scared to flash magisk which is annoying because i really want to root my phone to get rid of ads and stuff
Click to expand...
Click to collapse
Where are you getting ads

wasteoinc said:
I also don't want the xiaomi crap but I also want to use my phone in a usefull way, not having to deal with all the issues other roms introduces.
In my old phone (xiaomi 4x) the miui.eu rom was quite good and you could improve on it by deleting xiaomi system apps that you didn't want to use. I don't know whats the story now, but Im trying to learn.
Somebody said that the A/B partitioning scheme bloats the GB in the system but still 18 seems a lot to me.
Im still a bit scared to flash magisk which is annoying because i really want to root my phone to get rid of ads and stuff
Click to expand...
Click to collapse
Magisk installs a bit funky with the RN11 since I stayed on the crDroid recovery. I recall I had to do the adb sideload method. Go under the Add Update section. You still need the boot.img and vbmeta.img from your installed ROM.

Sheist! said:
Magisk installs a bit funky with the RN11 since I stayed on the crDroid recovery. I recall I had to do the adb sideload method. Go under the Add Update section. You still need the boot.img and vbmeta.img from your installed ROM.
Click to expand...
Click to collapse
You could have chosen apply update chosen your SD card then flashed magisk.zip

LolFlasherNoob said:
You could have chosen apply update chosen your SD card then flashed magisk.zip
Click to expand...
Click to collapse
Actually, the recovery would not recognize the external SD. Nothing changed on it. I did freak a bit until the sideload worked from PC. Still won't read it in the stock crDroid 9.2 recovery but every other place it does.
Edit: it is just the recovery that fails to read it. Apps within system read it fine, and it mounts. "unsupported filesystem exfat" as seen in recovery. I did not format in exfat, though.

LolFlasherNoob said:
...
Btw , are you getting issues in which your device randomly reboots (with animation) sometimes and apps crash unnecessarily ?
I have no nfc Indian 6 64 variant and I get this issue in all .eu roms for my device .
These issues are nowhere to be found in other custom roms .
Click to expand...
Click to collapse
No I had no such issues , I have the version with NFC. I finally got magisk and adaware so now I will cool a bit before trying something different. LineageOS seems not supported anymore and from the other custom roms still not sure if you get more issues than miui.eu