[ROM] [TW 6.0.1 ] T813XXU1APF4 Stock Rooted Odex / DeOdex for Samsung Galaxy Tab S2 SM-T813 Only
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Introduction
This is the based on the official T813XXU1APF4 TW 6.0.1 for Samsung Galaxy Tab S2 (SM-T813 version)
Click to expand...
Click to collapse
Features
Rooted
Busybox
Odex / DeOdexed (both available)
No-Encryption Kernel Included (Thanks to @ashyx)
Click to expand...
Click to collapse
Requirements
A SM-T813
TWRP recovery
Latest APF4 bootloader
Click to expand...
Click to collapse
Installation
Backup your device, in case you wanted to revert back.
Wipe Data/Factory Reset in recovery.
Flash the ROM
Reboot
First boot will take around 5-10 minutes
Click to expand...
Click to collapse
Downloads
Odex Version:
https://www.androidfilehost.com/?fid=24588232905721412
MD5: d8cad1aa808724c702c15efd4d3f0701
DeOdex Version:
https://www.androidfilehost.com/?fid=24588232905721411
MD5: 66e86093af6116ba14361af43de81962
Click to expand...
Click to collapse
Enjoy!!!
XDA:DevDB Information
[ROM] [TW 6.0.1 ] T813XXU1APF4 Stock Rooted Odex / DeOdex for SM-T813, ROM for the Samsung Galaxy Tab S2
Contributors
pvsgh
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Current Stable Version: 1.0
Created 2016-07-18
Last Updated 2016-07-18
Reserved 1
Reserved 2
Just in case
So if my understanding is correct:
1) You took a TWRP backup of /system
2) You put that extracted backup into superr kitchen and built using set_metadata
3) You did some other magic with the ROM
I'm having trouble getting my extracted TWRP backup into SuperR's kitchen; how did you do that step?
Lightn1ng said:
So if my understanding is correct:
1) You took a TWRP backup of /system
2) You put that extracted backup into superr kitchen and built using set_metadata
3) You did some other magic with the ROM
I'm having trouble getting my extracted TWRP backup into SuperR's kitchen; how did you do that step?
Click to expand...
Click to collapse
You should have entire system folder and boot.img under the project folder, kitchen should be able to detect it automatically.
pvsgh said:
You should have entire system folder and boot.img under the project folder, kitchen should be able to detect it automatically.
Click to expand...
Click to collapse
I did that after creating the project, and the Android Version is empty.
Lightn1ng said:
I did that after creating the project, and the Android Version is empty.
Click to expand...
Click to collapse
Try exiting kitchen and load the project again.
pvsgh said:
Try exiting kitchen and load the project again.
Click to expand...
Click to collapse
Tried that too.
Lightn1ng said:
Tried that too.
Click to expand...
Click to collapse
Then I guess your kitchen is not setup properly, what Linux are you using?
I'm using Ubuntu 16
pvsgh said:
Then I guess your kitchen is not setup properly, what Linux are you using?
I'm using Ubuntu 16
Click to expand...
Click to collapse
I am using Lubuntu 16.04. I'll PM you if I can't fix this issue momentarily, I don't want your ROM thread to be filled with this.
Lightn1ng said:
I am using Lubuntu 16.04. I'll PM you if I can't fix this issue momentarily, I don't want your ROM thread to be filled with this.
Click to expand...
Click to collapse
Ok, if you have a fast download link for your firmware, send it to me. I'll try it in my environment.
pvsgh said:
Ok, if you have a fast download link for your firmware, send it to me. I'll try it in my environment.
Click to expand...
Click to collapse
Ok scratch that I got it working properly. Thanks for your help!
again, sorry for clogging up the thread.
Lightn1ng said:
Ok scratch that I got it working properly. Thanks for your help!
again, sorry for clogging up the thread.
Click to expand...
Click to collapse
No worries.
Any updates to this? How is it running on your 813's? Any issues with odex/deodex versions?
Hey pvsgh, can you make it possible for SM-t713 MMB29M.T713XXU1APG1 Stock Rooted Odex / DeOdex, something for what you do for SM-T813? many thanks!
@pvsgh Will you be releasing updates for this as stock gets updated?
DJMartini said:
@pvsgh Will you be releasing updates for this as stock gets updated?
Click to expand...
Click to collapse
Sorry, I no longer have this device. I returned mine as I hated the aspect ratio on video playback and that was my primary use on the tablet. It would be really difficult to make a rom wihout the device.
Lightn1ng might be able to provide an updated ROM for T813, please check with him.
pvsgh said:
Sorry, I no longer have this device. I returned mine as I hated the aspect ratio on video playback and that was my primary use on the tablet. It would be really difficult to make a rom wihout the device.
Lightn1ng might be able to provide an updated ROM for T813, please check with him.
Click to expand...
Click to collapse
Thanks for the response back.
Related
ZAxon DMix7
v0.3​
Read Carefully!
​
Code:
#include
/*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Hello everyone,
Here i am for the first time posting a ROM (yeah never had done such thing, tilll now :O so kill me if there is something wrong OK ) here are the following changes from Stock Rom.
Changes / Features:
- Base on A2017U B29.
- Partial de-bloated. (If Want more De-bloated version let me know in the comments)
- Deodex.
- Rooted (Using SuperSU v2.65).
- 5 Extra Themes for the Total of 7 themes.
Click to expand...
Click to collapse
Requirements:
- Unlock Bootloader
- Latest TWRP 3.02-2
- B29 Update
Click to expand...
Click to collapse
Notes:
- YOU MUST BE UNLOCK BOOTLOADER (Haven't tested for Lock Bootloader and if you are flashing this using lock Bootloader you are on your own)
- If you already have B29 installed, you can dirty flash ZAxon DMix7, apps/data won't be touch but if you have Xposed you need to reflash Xposed again.
- If you are not on B29 , you can update using the following guide :[GUIDE] A2017U.B29 Update
Click to expand...
Click to collapse
Download Link :
ZADMix7_Roms
Click to expand...
Click to collapse
Installation:
1- Reboot to TWRP
2- Wipe Cache - Dalvik
NOTE: If you are already have B29 you can dirty flash Dmix7, if NOT you will need to Wipe DATA.
3- Flash ZAxon_Dmix7_v0.1.zip
* Additional If you want Xposed , Flash Xposed after Dmix7
Click to expand...
Click to collapse
Thanks To/Credits:
* @ SuperR. for his super kitchen Linux Tools
Click to expand...
Click to collapse
XDA:DevDB Information
Z.A.D.Mix7, ROM for the ZTE Axon 7
Contributors
DrakenFX, DrakenFX
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: B29
Based On: Stock
Version Information
Status: Stable
Current Stable Version: v0.1
Stable Release Date: 2016-11-07
Created 2016-11-08
Last Updated 2017-04-09
Wow, another rom, i'm surprised to see another one. First the CM 13, now Nello, now this. Going to test it out
Change Log​
* v0.1
- Initial Release.
- SuperSU v2.65
- Partial De-Bloated.
- Deodex.
- 5 Extra Themes (Total of 7 Themes).
*v0.2
- More De-Bloating
- On-Screen Navigation Bar.
- Multi-User (Up to 5 users)
*v0.3
- More De-Bloating (There be no more de-bloating after this)
- Google Dialer
- Google Contact
- Solid Explorer
- Nova Launcher Beta 5.0 beta 8
- Textra feel better than Google Messenger (if you haven't use it you'll love it)
- Added AdAway.
- Some Build.prop tweaks.
TROUBLESHOOTING
Q. How to disable On-screen keys?
A. Using your favourite Build.prop editor, look for this line:qemu.hw.mainkeys then change 0 for 1 and reboot.
Your On-screen Nav. Bars will be disabled permanent, till you change the value back to 0.
Q. AdAway or DPI changes are not working?
A. try disabling system write
* Using ADB
Code:
adb shell reboot disemmcwp
* Using Terminal Emulator
Code:
su
reboot disemmcwp
Your device will REBOOT and try again.
.
Gr8 to have traction in this community... Quick question it's booting? Have thevquestion bcoz another rom is not booting
Edit: booted and working fine
Sent from my ZTE A2017U using Tapatalk
`SBR` said:
Gr8 to have traction in this community... Quick question it's booting? Have thevquestion bcoz another rom is not booting
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
tested myself , Clean flash and Dirty flash + Xposed installation after.
which rom isn't booting?
It's raining ROMS!
I may be missing something here but where is the download link?
Am I just not seeing the DL link?
[EDIT]
There it is....For some reason, it was just normal text (no link). I came back to check it, and it was now a link... Downloading now!
tabletalker7 said:
I may be missing something here but where is the download link?
Click to expand...
Click to collapse
tele_jas said:
Am I just not seeing the DL link?
[EDIT]
There it is....For some reason, it was just normal text (no link). I came back to check it, and it was now a link... Downloading now!
Click to expand...
Click to collapse
hehehehe sorry guys, forgot to attach the link , done now.
Downloading now:fingers-crossed:
DrakenFX said:
tested myself , Clean flash and Dirty flash + Xposed installation after.
which rom isn't booting?
Click to expand...
Click to collapse
It's booted fine, earlier I was testing the b03 rom and it's stuck in boot logo.
Sent from my ZTE A2017U using Tapatalk
`SBR` said:
It's booted fine, earlier I was testing the b03 rom and it's stuck in boot logo.
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
I never try the b03 one, but I always test my files before posting and hopefully with little more time I'll be doing more modifications to it
`SBR` said:
It's booted fine, earlier I was testing the b03 rom and it's stuck in boot logo.
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
Mine literally took 7 minutes to get past the Boot logo... You might give it a few minutes?
tele_jas said:
Mine literally took 7 minutes to get past the Boot logo
Click to expand...
Click to collapse
Yep, as it's deodexed initial boot to build the cache is more longer time...
Sent from my ZTE A2017U using Tapatalk
Confirmed as working - dirty flashed over B29, installed xposed framework at same time, everything working perfectly. Good job man
The more custom ROMs, the merrier!
Might be good to have a general outline on what has been removed during debloat.
Also, how big are those extra themes? Depending on how big they are, maybe it would be good to break them out into a separate, optional flashable zip.
Up and running smooth!
Happy to have the 1st, fully functional, custom ROM on my A7!
Great work!
tele_jas said:
Up and running smooth!
Happy to have the 1st, fully functional, custom ROM on my A7!
Great work!
Click to expand...
Click to collapse
How its battery life ?
Sent from my Pixel using XDA-Developers mobile app
Not too shabby
Custom TWRP (TeamWin Recovery Project) Builds for Samsung Galaxy Note 4​
Disclaimer:
Code:
/*
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Fork of TWRP:
This UNOFFICIAL TWRP recovery is built for Samsung Galaxy Note 4 Snapdragon variants in EmotionOS/LineageOS Android 7.1.1 Nougat tree with correct device-specific SELinux policy. It fixed some warnings/errors and differs from the OFFICIAL TWRP in the following ways:
Designed to be built with LineageOS 14.1 only
Customize the mksh prompt and environment by editing mksh/mkshrc
Require fstab v2 syntax
Use external repositories for pigz, exfat, fuse
Power key toggles screen on/off
SuperSU and HTC Dumlock have been removed
Other customizations (see change history)
You can get the OFFICIAL TWRP recovery for Verizon Samsung Galaxy Note 4 (SM-N910V) from here. Other devices can find their variants in the device-specific forums.
Click to expand...
Click to collapse
Versioning:
To help distinguish builds of recovery made from this fork, the minor version digit is replaced with N#. Minor version increments will be handled as needed, independent of TWRP. The major and semi-major version digits follow upstream to roughly indicate feature parity (as close as possible with a fork, anyways).
Click to expand...
Click to collapse
Downloads:
Custom TWRP Builds for Samsung Galaxy Note 4
Click to expand...
Click to collapse
XDA:DevDB Information
TWRP, ROM for the Verizon Samsung Galaxy Note 4
Contributors
hsbadr
Source Code: https://github.com/mdmower/twrp
ROM OS Version: 7.x Nougat
Version Information
Status: Stable
Current Stable Version: 3.0.N1-20170205
Stable Release Date: 2017-02-05
Created 2017-02-05
Last Updated 2017-02-05
Reserved
Reserved
Is this twrp required or recommended for your Emo-14.1 builds?
I've found a little bug.
When flashing (there were 3 files added to flash) I turned off the screen using the power button.
After that pressing back the power button vibrated but remained with the screen off, touching the screen had the same effect.
I just waited and turned the phone off.
Next time I flashed the same things without press the power button to turn off the screen and worked fine, even though the screen went off automatically.
razholio said:
Is this twrp required or recommended for your Emo-14.1 builds?
Click to expand...
Click to collapse
Curious about this myself.. and will it affect going back to other ROMs?
how is this different from the TWRP 3.0.2 I am running now on my device? or is this ONLY to flash nougat ROMS?
Delete
TWRP themes dont seem to work with this.
so how exactly would you flash the tar?
6th_Hokage said:
so how exactly would you flash the tar?
Click to expand...
Click to collapse
.tar files are flashed in Odin. You can download the.img custom recovery and flash it in official TWRPapp from the link above
Sent from my Samsung SM-N910G using XDA Labs
Did anyone find the answer to the question whether this had to be used, or just recommended? Also can you use that same recovery to flash other roms?
scottsdca said:
Did anyone find the answer to the question whether this had to be used, or just recommended? Also can you use that same recovery to flash other roms?
Click to expand...
Click to collapse
Well I can confirm official twrp still works for 2/5 and 2/13 ROMs.
Every time I try to install emotionrom it never recognizes my sim, so I'm not sure if it's because I'm not using the right twrp.
Hi, does this comment "* Require fstab v2 syntax" mean we may have issues flashing Roms that are not LineageOS or EmotionOS? (ie touchwiz)
Sent from my SM-N9200 using Tapatalk
IndyRoadie said:
Curious about this myself.. and will it affect going back to other ROMs?
Click to expand...
Click to collapse
happy2472 said:
how is this different from the TWRP 3.0.2 I am running now on my device? or is this ONLY to flash nougat ROMS?
Click to expand...
Click to collapse
scottsdca said:
Did anyone find the answer to the question whether this had to be used, or just recommended? Also can you use that same recovery to flash other roms?
Click to expand...
Click to collapse
fastguy said:
Hi, does this comment "* Require fstab v2 syntax" mean we may have issues flashing Roms that are not LineageOS or EmotionOS? (ie touchwiz)
Sent from my SM-N9200 using Tapatalk
Click to expand...
Click to collapse
Inquiring minds want to know
IndyRoadie said:
Inquiring minds want to know
Click to expand...
Click to collapse
Same questions here
Stuck in a bootloop on 910T...can't even boot into system.
TWRP issue on 910F
I've hit a bug with VERSION twrp-3.0.N1-20170205-UNOFFICIAL-trltexx.tar. Every time I flush with this recovery i get an encryption failed error. I've had to revert back to twrp-3.0.2-0-treltexx in order to flush my ROMs. Hope this helps someone out there.
I successfully loaded LineageOS 14.1 (Android 7.1.1) using a standard TWRP build (found on their Devices page) - I never knew about this build.
Hi guys!
I built TWRP [Ver: 3.X] from scratch for Samsung A3 series.
Update: TWRP is official now only for Samsung A300H/F/M!
Disclaimer:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired. Please
* do some research if you have any concerns about features included in this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Supported Models:
Samsung A300H (2015)
Samsung A300F (2015)
Samsung A300M (2015)
Samsung A300FU (2015)
Click to expand...
Click to collapse
Root your phone.
(1) Download the Official TWRP App.
(2) Open Official TWRP App > Select TWRP Flash > Select A Device > Search for Samsung A300H (a33g).
(3) Select Samsung A300H (a33g). Then select "twrp-3.2.1-0-a33g.img".
(4) It opens a broswer and select download "twrp-3.2.1-0-a33g.img".
(5) Open Official TWRP app again, select "Select a file to flash.." and select the file you just downloaded and then select "Flash To Recovery". Confirm flash.
(6) Then reboot to recovery.
You are in TWRP!
BUGS:
Mentioned in 3rd post.
Device Tree I created for SM-A300H: https://github.com/PVineeth/android_device_samsung_a33g_recovery
Device Tree I created for SM-A300FU:
https://github.com/PVineeth/android_device_samsung_a3ulte_recovery
Thanks to my friends on XDA for helping me in building device tree and building TWRP from scratch!
XDA:DevDB Information
TWRP 3.X for SM-A3 Series, Tool/Utility for the Samsung Galaxy A Series
Contributors
pvineeth97
Version Information
Status: Beta
Created 2017-03-31
Last Updated 2018-05-20
Reserved.
BUGS
(1) ADB Sideload gets stuck.
Will fix this bug soon!
Couldnt this one be flashed with the one I have installed?
Sent from my SM-A300H using Tapatalk
mcastellon said:
Couldnt this one be flashed with the one I have installed?
Sent from my SM-A300H using Tapatalk
Click to expand...
Click to collapse
What did you install?
3.0.2
Sent from my SM-A300H using Tapatalk
mcastellon said:
3.0.2
Sent from my SM-A300H using Tapatalk
Click to expand...
Click to collapse
You can install it over 3.0.2 for sure
Sorry everything is working
mcastellon said:
3.0.2
Sent from my SM-A300H using Tapatalk
Click to expand...
Click to collapse
I am sorry I am making you bit confused.
I was installing LineageOS 14.1.
I didn't wipe partitions. I thought it is the problem of TWRP.
Now I followed the instructions given in that guide. Works perfectly
You can install it over 3.0.2 using my guide
Successfully flashed it bro..... Will this have OTG support?
Sent from my SM-A300H using Tapatalk
mcastellon said:
Successfully flashed it bro..... Will this have OTG support?
Sent from my SM-A300H using Tapatalk
Click to expand...
Click to collapse
Not for now!
mcastellon said:
Successfully flashed it bro..... Will this have OTG support?
Sent from my SM-A300H using Tapatalk
Click to expand...
Click to collapse
If you find any bugs tell me. Thanks
Not working with A300Fu, thanks for the work !
666dsa666 said:
Not working with A300Fu, thanks for the work !
Click to expand...
Click to collapse
Sorry I forgot to mention that this TWRP is only for H/M/F.
I will compile a new TWRP for A300FU
pvineeth97 said:
Sorry I forgot to mention that this TWRP is only for H/M/F.
I will compile a new TWRP for A300FU
Click to expand...
Click to collapse
Cool, thank you !
666dsa666 said:
Cool, thank you !
Click to expand...
Click to collapse
Theoretically, this TWRP should work! What happens when you try to boot into recovery?
pvineeth97 said:
Theoretically, this TWRP should work! What happens when you try to boot into recovery?
Click to expand...
Click to collapse
It reboot the phone, also there is a seandroid not enforcing message (probably not a problem).
If you need a tester I'm here
666dsa666 said:
It reboot the phone, also there is a seandroid not enforcing message (probably not a problem).
If you need a tester I'm here
Click to expand...
Click to collapse
ok. Can you send me the firmware file for your phone?
pvineeth97 said:
ok. Can you send me the firmware file for your phone?
Click to expand...
Click to collapse
Working TWRP : https://forum.xda-developers.com/sa...overy-samsung-galaxy-a72015-sm-a700f-t3362283
Actual Rom : https://forum.xda-developers.com/sa...om-lineageos-14-1-unofficial-samsung-t3532574
Official rom : Uploading (slow connection)
Do you need a special file to speed up the uploading ?
666dsa666 said:
Working TWRP : https://forum.xda-developers.com/sa...overy-samsung-galaxy-a72015-sm-a700f-t3362283
Actual Rom : https://forum.xda-developers.com/sa...om-lineageos-14-1-unofficial-samsung-t3532574
Official rom : Uploading (slow connection)
Do you need a special file to speed up the uploading ?
Click to expand...
Click to collapse
Extract recovery.img from official rom and send me.
pvineeth97 said:
Extract recovery.img from official rom and send me.
Click to expand...
Click to collapse
Here you go https://mega.nz/#!ikITQa7J!sQhdRRp2Fz1fbUoM9pv-fQf2r728vnrNBVLy6V9MlV0
Its from the "A300FUXXU1CPH3_A300FUDBT1CPI1_A300FUXXU1CPH3_HOME.tar"
Thanks for your Work :good:
You want MIUI 9? There are still no fancy threads for MIUI 9 on osprey. I tried to port it. Now people should test it!
Installing is usual - MAKE A BACKUP OF YOUR OLD ROM, Wipe, Install the new zip. GApps are included Out-of-the-Box.
After installing:
1. Tell if it boots
If it doesn't: say what SKU is your phone (for example mine is XT1441)
2. Tell us what works and what doesn't
3. If at least calling works and Wi-Fi works, you can try using it as a daily driver. Tell us how battery goes.
Do all that in the "Reviews" tab on the top of this thread.
I'm going to try it out, too. And I'm going to tell you what happened.
Download the ROM through the "Downloads" tab.
==================================================
UPDATE: Base Android changed to Marshmallow by requests from this thread and for better compatibility.
XDA:DevDB Information
MIUI9, ROM for the Moto G 2015
Contributors
nicolasmart, jhenrique09, CyanogenMod (formely Lineage)
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.x
Based On: CyanogenMod
Version Information
Status: Testing
Created 2017-10-26
Last Updated 2017-10-29
Reserved
Changelog:
2017.10.29 - Test4 (Lollipop):
* Reverted base to Lollipop. Looks like even Mi 4 isn't compatible with our device. I'm going to upgrade back to Marshmallow or Nougat when official MIUI 9 comes out.
* We have some progress - the kernel now works and the phone starts booting. It hangs on the boot animation. Please send logcats. I will look through mine, too.
2017.10.28 - Test3 (Marshmallow):
* Switched base to Marshmallow
* Also not booting because of the wrong architecture.
2017.10.26 - Test2 (Lollipop):
* Flashing but not booting
2017.10.26 - Test1 (Lollipop):
* Initial Release
* Not flashing
Does Gapps are included or have to download seperately and if seperately then which one?
Apurba99 said:
Does Gapps are included or have to download seperately and if seperately then which one?
Click to expand...
Click to collapse
GApps are included out of the box, so don't worry about that. Again, don't plan to use this as a daily driver. Just test it and tell if it works.
If there is some problem ,then its wouldn't hard brick my device, right?I have only one phone ?
Apurba99 said:
If there is some problem ,then its wouldn't hard brick my device, right?I have only one phone
Click to expand...
Click to collapse
Don't worry! It won't hard brick it. You will just need to reflash your ROM with something stable, like Lineage OS, for example.
Ok then, I'll flash it ASAP
It will be nice if there is marshmallow or Nougat.
Flashing it ASAP :good:
mg_jishad said:
It will be nice if there is marshmallow or Nougat.
Click to expand...
Click to collapse
I'm sorry. In MIUI it doesn't matter that much what Android version are you running. And I don't think Lollipop is obsolete. I just chose it because Redmi 2 runs our chipset and it's the easiest device to port from.
UPDATE: Zip File doesn't flash. Will fix ASAP.
Flashed but Stuck on boot logo .. Waited for around 10mins.
nicolasmart said:
You want MIUI 9? There are still no fancy threads for MIUI 9 on osprey. I tried to port it. Now people should test it!:
Click to expand...
Click to collapse
Flashed but dont pass on boot logo
Project Updated!
Using Marshmallow port from Redmi 3S. Edited kernel. Try it out and see if it boots. There must be quite some bugs. But I want to see if it boots.
Go ahead and try it out if you have already downloaded another stable ROM like Lineage to flash after you try this one.
nicolasmart said:
Project Updated!
Using Marshmallow port from Redmi 3S. Edited kernel. Try it out and see if it boots. There must be quite some bugs. But I want to see if it boots.
Go ahead and try it out if you have already downloaded another stable ROM like Lineage to flash after you try this one.
Click to expand...
Click to collapse
Great
rahul9999 said:
Great
Click to expand...
Click to collapse
Can you try it out, please? My phone is currently not with me.
nicolasmart said:
Can you try it out, please? My phone is currently not with me.
Click to expand...
Click to collapse
I would like to be test this but as i don't want to switch any ROM for sometime.. will let you know if possible for me to test
nicolasmart said:
Project Updated!
Using Marshmallow port from Redmi 3S. Edited kernel. Try it out and see if it boots. There must be quite some bugs. But I want to see if it boots.
Go ahead and try it out if you have already downloaded another stable ROM like Lineage to flash after you try this one.
Click to expand...
Click to collapse
Where is the download tab?
Hunimix said:
Where is the download tab?
Click to expand...
Click to collapse
Use this link: #Download tab
...or just look at the top of this thread.
nicolasmart said:
Use this link: #Download tab
...or just look at the top of this thread.
Click to expand...
Click to collapse
I do not appear in the top, so my question, I'm already downloading from the #download tab, ty
Hunimix said:
I do not appear in the top, so my question, I'm already downloading from the #download tab, ty
Click to expand...
Click to collapse
Hmmm... interesting... I should put the downloads tab link in the first post then.
LOS 15.1 FROM SM-G360H (CORE PRIME) TO SM-T116 (TAB 3 LITE 3G+WIFI GOYAVE3G+GOYAVEWIFI)
ADDED SUPPORT FOR T113 AND T116 (WIFI)
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Does Work:
GPS
BLUETOOTH
SIM
SINCRONIZATION
HOTSPOT
VOLUME
MTP
IMEI
DOESN'T WORK
SCREEN RESOLUTION
WIFI
CAMERA
OFF MODE CHARGING
ONLY MAGISK (SUPERSU FIX)
TELL ME FOR OTHER ISSUES
PLEASE DOWNLOAD THE ROM FROM THE LINKS BELOW BECAUSE THE ROM IN DOWNLOAD SECTION IN NOT UPDATED
ALL LINKS UPDATED
Mediafire:
Mega:
Google Drive:
DOWNLOAD VYSOR ON PC, FLASH LINEAGE AND WAIT VYSOR RECOGNIZES TAB, DOWNLOAD VYSOR APK, DOWNLOAD ADB AND OPEN CMD AND TYPE,
ADB DEVICES
ADB INSTALL VYSOR. APK
XDA:DevDB Information
Lineage 15.1 For SM-T116, ROM for the Samsung Galaxy Tab 3 7.0
Contributors
sasi2006166
ROM OS Version: 8.x Oreo
Based On: LineageOS
Version Information
Status: Testing
Created 2018-09-30
Last Updated 2018-09-30
I will post the video of this bug
Following this thread.
Thank you for your efforts.
Lord_Byron said:
Following this thread.
Thank you for your efforts.
Click to expand...
Click to collapse
Can you help me to fix resolution bug?
Unfortunately I don't know anything about development.
sasi2006166 said:
Can you help me to fix resolution bug?
Click to expand...
Click to collapse
Looks like you need too change the kernel,
sscsps said:
looks like you need too change the kernel,
Click to expand...
Click to collapse
can you help me because if i change the kernel cause bootloop
Can you fix it?
If we fix it i will port all android version from sm-g360h (because it's identical to sm-t116)
thanks for your time and help
Will it work on sm-t116nu?
ManuelGal said:
Will it work on sm-t116nu?
Click to expand...
Click to collapse
Yes should work because it's identical to sm-t116
Try and tell me
sasi2006166 said:
Yes should work because it's identical to sm-t116
Try and tell me
Click to expand...
Click to collapse
Can you make a custom ROM for sm-t116nu??.. android 5 or above plszz. Make me because I'm stuck in the boring KitKat.
ManuelGal said:
Can you make a custom ROM for sm-t116nu??.. android 5 or above plszz. Make me because I'm stuck in the boring KitKat.
Click to expand...
Click to collapse
Yes with Android 8.1
When I fix resolution bug I will adapt this rom with your tab
Sorry for bad English
sasi2006166 said:
Yes with Android 8.1
When I fix resolution bug I will adapt this rom with your tab
Sorry for bad English
Click to expand...
Click to collapse
Okay thank you very much, I will wait. Hope that you will succeed
ManuelGal said:
Okay thank you very much, I will wait. Hope that you will succeed
Click to expand...
Click to collapse
Try installing this rom first and tell me
I will build Rom for your tab when resolution bug is fixed
sasi2006166 said:
Try installing this rom first and tell me
I will build Rom for your tab when resolution bug is fixed
Click to expand...
Click to collapse
Okay I will install it and I will tell you if it's working on my tab...
manuelgal said:
okay i will install it and i will tell you if it's working on my tab...
Click to expand...
Click to collapse
backup all of your current rom in twrp first
go to wipe/advanced wipe/wipe cache data system dalvic chace
reboot to recovery
select install/lineage 15 and swipe to install
when you reboot connect to your pc and wait vysor recognize tab
download vysor apk and adb
open adb and write
adb devices
adb install vysor. Apk
I will make video
If when you reboot the display show white screen it's normal I'm working to fix
sasi2006166 said:
backup all of your current rom in twrp first
go to wipe/advanced wipe/wipe cache data system dalvic chace
reboot to recovery
select install/lineage 15 and swipe to install
when you reboot connect to your pc and wait vysor recognize tab
download vysor apk and adb
open adb and write
adb devices
adb install vysor. Apk
Click to expand...
Click to collapse
Where is the vysor?
ManuelGal said:
Where is the vysor?
Click to expand...
Click to collapse
Download this zip
https://www.mediafire.com/file/arcwtn9jj87mtp3/7367
It contains apk and exe file
sasi2006166 said:
Yes should work because it's identical to sm-t116
Try and tell me
Click to expand...
Click to collapse
I haven't looked it up, but how identical are these 2 device's?
You can probably use the trees and build instead of porting, you'll get better results.
sscsps said:
I haven't looked it up, but how identical are these 2 device's?
You can probably use the trees and build instead of porting, you'll get better results.
Click to expand...
Click to collapse
The CPU RAM GRAPHICS CARD ARE IDENTICAL
I can't build Rom because the source code released by Samsung has bug for example wifi and camera doesn't work
sasi2006166 said:
The CPU RAM GRAPHICS CARD ARE IDENTICAL
I can't build Rom because the source code released by Samsung has bug for example wifi and camera doesn't work
Click to expand...
Click to collapse
Okay, that's good, try building using the trees from that device