Related
So currently I think I've bricked my phone.. Phone is stuck at boot logo, I have stock recovery, and the PC won't recognize.. PLEASE HELP..
Maybe force update gonna help? Put some P7's ROM into dload folder and press 3 buttons for around 10sec.
sympi said:
Maybe force update gonna help? Put some P7's ROM into dload folder and press 3 buttons for around 10sec.
Click to expand...
Click to collapse
As mentioned earlier, my PC won't recognize my P7.. So i don't know how to put the dload folder into my sdcard / internal storage..
Do dload folder on sd card. Maybe put this sdcard into other phone or something else. Just use your brain.
sympi said:
Do dload folder on sd card. Maybe put this sdcard into other phone or something else. Just use your brain.
Click to expand...
Click to collapse
Lol....
---------- Post added at 10:00 AM ---------- Previous post was at 09:58 AM ----------
Lankern98 said:
As mentioned earlier, my PC won't recognize my P7.. So i don't know how to put the dload folder into my sdcard / internal storage..
Click to expand...
Click to collapse
Yah. Better use your brain. There are a lot things to consider how you could put the update file in your sdcard.
Lankern98 said:
So currently I think I've bricked my phone.. Phone is stuck at boot logo, I have stock recovery, and the PC won't recognize.. PLEASE HELP..
Click to expand...
Click to collapse
If you do force update and insert the USB cable while recovery is loading, the phone will accept ADB, and you can use
Code:
adb reboot bootloader
and then use flashtool to flash system images or flash CWM recovery.
I have a problem i wanna update b602 to b609 but i can`t use dload because i have cwn recovery can anyone upload the b602 recovery.img please
Sent from my HUAWEI P7-L10 using XDA Free mobile app
xandrew22 said:
I have a problem i wanna update b602 to b609 but i can`t use dload because i have cwn recovery can anyone upload the b602 recovery.img please
Sent from my HUAWEI P7-L10 using XDA Free mobile app
Click to expand...
Click to collapse
http://www.mediafire.com/download/86wcs1wwpc5t120/P7_EMUI3x_stock_recovery.zip
This should do it. Simply flash this recovery img. via ADB
I'm in the same problem
sympi said:
Maybe force update gonna help? Put some P7's ROM into dload folder and press 3 buttons for around 10sec.
Click to expand...
Click to collapse
the Last rom i have on my phone before this problem is the b815 , i wanna try all the rom...The only problem is the phone accept only UPDATE.APP and alla the roms are zipped. I'm not so expert where can i Find some UPDATE. app roms
xandrew22 said:
the Last rom i have on my phone before this problem is the b815 , i wanna try all the rom...The only problem is the phone accept only UPDATE.APP and alla the roms are zipped. I'm not so expert where can i Find some UPDATE. app roms
Click to expand...
Click to collapse
Can you boot into your phone? If not, wait at least 10 min or so. Then you will be prommoted to something like "BOOT FAILED". From there, you have to hold down volume down for 6 sec (I think). Now you've entered fastboot mode. Finally, you can access your phone through PC. This worked for me though!
Thanks man
Lankern98 said:
Can you boot into your phone? If not, wait at least 10 min or so. Then you will be prommoted to something like "BOOT FAILED". From there, you have to hold down volume down for 6 sec (I think). Now you've entered fastboot mode. Finally, you can access your phone through PC. This worked for me though!
Click to expand...
Click to collapse
Finally solved. This is the method i used .
I connected the phone to the pc while he's powered off and immediately i pressed vol- + power to get in fastboot mode and then i flashed boot.img and recovery.img of the b815 with adb... at the finish it reboot like a new phone infact it request me the language etc.
Code:
adb devices
adb reboot bootloader (my phone reboot in bootloop so i skip this passage)
fastboot devices
##put recovery and boot file in the adb folder##
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot reboot
This is to help who have the same problem in the future
xandrew22 said:
Finally solved. This is the method i used .
I connected the phone to the pc while he's powered off and immediately i pressed vol- + power to get in fastboot mode and then i flashed boot.img and recovery.img of the b815 with adb... at the finish it reboot like a new phone infact it request me the language etc.
Code:
adb devices
adb reboot bootloader (my phone reboot in bootloop so i skip this passage)
fastboot devices
##put recovery and boot file in the adb folder##
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot reboot
This is to help who have the same problem in the future
Click to expand...
Click to collapse
Glad to hear you fixed it! Hopefully this thread will become useful for those who have bricked their phone..
URGENT!
So I tried to reset my P7 through the phone, and I ended up with locked bootloader. Everytime I boot, both red and green LED flash.. I have also tried to get the IMEI unlock code through huawei official web page, but I get the error as shown below.. Can someone please help me get this code? Please!
Lankern98 said:
So I tried to reset my P7 through the phone, and I ended up with locked bootloader. Everytime I boot, both red and green LED flash.. I have also tried to get the IMEI unlock code through huawei official web page, but I get the error as shown below.. Can someone please help me get this code? Please!
Click to expand...
Click to collapse
use simillar procedure as with p8
put all your info of your phone to that email there ..
http://huaweip8.jniklast.bplaced.net/unlock.html
I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.
Me_Ashish_ said:
I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.
Click to expand...
Click to collapse
Don't worry have you backup you data?
if you have, just install the driver for qhusb
then your phone should be able to recognises by MIflash then flash any fastboot rom, You phone should be good to go.
I had a similar issue but i tried to hold the power button for like 30 seconds and the phone booted. If it didn't work, you should follow this thread: en.miui.com/forum.php?mod=viewthread&tid=73348&highlight=Mi3%2Bunbrick&mobile=no
partition error
u must download fastboot rom this link : http://en.miui.com/a-234.html > Xiaomi Mi 4 CDMA/WCDMA/LTE Latest Global Stable Version Fastboot File Download
and unzip change flash_all.bat file special this flash_all.bat link https://drive.google.com/file/d/0B2UMSvqNe0deMXFVeE13VGNHTTg/view
use flash_all.bat after max 6 minutes ready your phone
murattiy said:
partition error
u must download fastboot rom this link : http://en.miui.com/a-234.html > Xiaomi Mi 4 CDMA/WCDMA/LTE Latest Global Stable Version Fastboot File Download
and unzip change flash_all.bat file special this flash_all.bat link https://drive.google.com/file/d/0B2UMSvqNe0deMXFVeE13VGNHTTg/view
use flash_all.bat after max 6 minutes ready your phone
Click to expand...
Click to collapse
Did you personally tried that? Because flash all bat do uses fastboot to flash, which can't be accessed.
I wonder whether the other one u poster doesn't use fastboot, cant check the file content atm
I have tried many times
last times tried 3 hours ago, for alpha 5.12.24
my video under explain
http://m.youtube.com/watch?v=fSl9xrR_J4g
@murattiy that flash file didn't help either as it was based upon fastboot
But, the device was directly detected in MiFlash and simple flashing made it run lol
you need to do İnstall spacial flash_all.batt change to in flash_all.batt "cancro_global_images_V7.0.5.0.KXDMICI_20151016.0000.3_4.4_global"
dont use miFlash .. enough u clik speical flash_all.batt
If your device not boot into fastboot/recovery mode press power button for around 30-40 seconds .
and still not boot into fastboot/recovery mode
battery cable exist than try.. i tried many times))
Me_Ashish_ said:
I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.
Click to expand...
Click to collapse
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
From where can i get QHUSUB Bulk drivers?
Now Mi4 is not even getting detected by USB?
Prince Chandela said:
From where can i get QHUSUB Bulk drivers?
Now Mi4 is not even getting detected by USB?
Click to expand...
Click to collapse
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
Not going to send to phone center & currently my ROM can't not boot because of extend partition before & not stock partition... Help me PLEASE !!!
coolkillermax said:
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
Not going to send to phone center & currently my ROM can't not boot because of extend partition before & not stock partition... Help me PLEASE !!!
Click to expand...
Click to collapse
You don't need Qhusb driver. secondly can you boot in fast boor mode (power +vol-)?
回复: Bricked Mi3 - Showing QHUSUB Bulk in PC
Prince Chandela said:
You don't need Qhusb driver. secondly can you boot in fast boor mode (power +vol-)?
Click to expand...
Click to collapse
Fastboot can & if press volume up+power button Phone won't boot to twrp recovery… Just MI logo blinking……
Sent from S660 using xda premium 4
coolkillermax said:
Fastboot can & if press volume up+power button Phone won't boot to twrp recovery… Just MI logo blinking……
Sent from S660 using xda premium 4
Click to expand...
Click to collapse
flash miui fastboot rom then
Prince Chandela said:
flash miui fastboot rom then
Click to expand...
Click to collapse
Flashed many ROMs including MIUI 7 fastboot ROM = Not working After flash MI logo keep blinking
coolkillermax said:
Flashed many ROMs including MIUI 7 fastboot ROM = Not working After flash MI logo keep blinking
Click to expand...
Click to collapse
can you boot in recovery now?
Prince Chandela said:
can you boot in recovery now?
Click to expand...
Click to collapse
No...
http://forum.xda-developers.com/xiaomi-mi-3/help/mi3w-lost-partition-userdata-img-t3293583
Me_Ashish_ said:
@murattiy that flash file didn't help either as it was based upon fastboot
But, the device was directly detected in MiFlash and simple flashing made it run lol
Click to expand...
Click to collapse
Really need your help..
Can you explain it further?
please..
:crying: I was trying to root the phone with twrp in fastboot mode, but all of a sudden my pc shut down while still in fastboot twrp mode. and now my phone wont turn on. I cant boot into recovery, fastboot, no charge led, please guys help me.
Is it recognized when you plug it to your computer ?
mysa50 said:
Is it recognized when you plug it to your computer ?
Click to expand...
Click to collapse
it is recognized like qualocom 9008 usb bulk somethink like it, i dont remember, please help me and sorry for late reply I/m litterelly crying right now, please help me
mysa50 said:
Is it recognized when you plug it to your computer ?
Click to expand...
Click to collapse
My Pc recogonizes it as " Qualcomm HS-USBQDloader 9008 (COM10) "
https://forum.xda-developers.com/mi-5/help/bricked-mi5-t3528810
Good news so. Just download the fastboot version of the miui rom you want, download miflash tool (Google it) and use it to flash the rom. You can find full steps by step somewhere in the xda threads.
mysa50 said:
Good news so. Just download the fastboot version of the miui rom you want, download miflash tool (Google it) and use it to flash the rom. You can find full steps by step somewhere in the xda threads.
Click to expand...
Click to collapse
Sorry but i cant get into fastboot mode or recovery mode, will mi flash work without getting into fastboot mode?
vicky 1859 said:
Sorry but i cant get into fastboot mode or recovery mode, will mi flash work without getting into fastboot mode?
Click to expand...
Click to collapse
No need to enter in fastboot mode with miflash that's the point with this method. But you'll loose everything on your phone
mysa50 said:
No need to enter in fastboot mode with miflash that's the point with this method. But you'll loose everything on your phone
Click to expand...
Click to collapse
Thank you, will try now, but will take some time to download the rom, will definitely update on the process once i tried it. i really appreciate your reply, hope this works. thanks once again.
a million thanks
It worked, You are a life saver,:good::good::good::good: thank you very much for your assistance.
I would first recommend you to download any Mi 5 Fastboot image from MIUI forums than install it in Fastboot mode (Hold Volume down+ Power button) through ADB or MIflash tool.
Afterwards recharge your phone fully and then proceed to install TWRp and custom ROM (provided you have unlocked bootloader)
vicky 1859 said:
It worked, You are a life saver,:good::good::good::good: thank you very much for your assistance.
Click to expand...
Click to collapse
I have exactly the same problem
Can you tell us PLZ what you did?
And what tools are required
< new Mi5
ty
Sir Mohd said:
I have exactly the same problem
Can you tell us PLZ what you did?
And what tools are required
< new Mi5
ty
Click to expand...
Click to collapse
http://en.miui.com/a-234.html
Guys I wanted to install custom roms in my Xiaomi mi 5 , therefore got my bootloader unlocked and installed twrp recovery through adb . After that , I wiped my miui ROM after taking its backup and tried flashing aoscp ROM , which didn't flash . Thereafter , I restored the previous ROM and now whenever I reboot , it gets stuck on the initial startup screen where Mi logo is there .
Kindly suggest on what to do next since this is very worrying issue for me . Regards
Thread Closed
tell what you did, to brick phone.
what android version was before, what android wersion you tried to instal, what recovery you used. ?
oh, but if fastboot isnt working, you more or less are done. if im correct, even dc phoenix use fastboot..
"Step 1
Write compatible UPDATE.APP file in fastboot with DC Phoenix"
Arnys said:
tell what you did, to brick phone.
what android version was before, what android wersion you tried to instal, what recovery you used. ?
oh, but if fastboot isnt working, you more or less are done. if im correct, even dc phoenix use fastboot..
"Step 1
Write compatible UPDATE.APP file in fastboot with DC Phoenix"
Click to expand...
Click to collapse
i just use the SRKTool Lod Chan and try to unlocked the bootloader
and it success , after that i proceed to replace recovery with TWRP
but doesn't work . afterwards i bring back to re-lock bootloader
then the phone reboot . the phone stuck at android boot logo
no recovery no fastboot cannot identify even in PC
but when the phone gets drain and i plugged the charger on it
the phone reboots directly into the system or its OS
but when i try to power it off again ( reboot )
the same thing happen it will stuck in the boot logo
until the battery dries again ,.
i never upgrade to Nougat so my phone still in Marshmallow version
thank you .
vinfrix said:
i just use the SRKTool Lod Chan and try to unlocked the bootloader
and it success , after that i proceed to replace recovery with TWRP
but doesn't work . afterwards i bring back to re-lock bootloader
then the phone reboot . the phone stuck at android boot logo
no recovery no fastboot cannot identify even in PC
but when the phone gets drain and i plugged the charger on it
the phone reboots directly into the system or its OS
but when i try to power it off again ( reboot )
the same thing happen it will stuck in the boot logo
until the battery dries again ,.
i never upgrade to Nougat so my phone still in Marshmallow version
thank you .
Click to expand...
Click to collapse
what wersion of twrp ? link. there are MM and N versions, and, if you on MM put N version twrp, you will brick phone.. and, even with dead battery i was able to enter fastboot, when i instaled wrong twrp. but for me solution was simple, instal right twrp and all was good (ofcorse if you didnt delete system)
i can't remember the version but im sure it all arounds in 2.1...something
no i wasn't load the Nougat version because i know i am MM the only thing i remember is the TWRP i load is from SRKTool Lod Chong there was an option there to install twrp recovery
can i be able to enter the fastboot ?
if i can go over to fastboot i can repair this
but i can't go fastboot
volume rocker technique doesn't work
even using adb reboot bootloader too
when i am doing volume down ( hold )
the phone only vibrates then stuck at logo
even when its connected to adb command
when the phone reboot it stuck at the logo
can't go to fastboot ?
is there any way of forced
reflash the boot.img & recovery.img?
Hi, i have P9 L19 with C432 B210 i want to update do Android 7, but mistakely put wrong UPDATE to phone memory. Now I'm stucked at Huawei logo and cant turn off device.
Only I can get to Fastboot&Rescue Mode. After press all three buttons nothing happened, phone juest restarts and stuck at logo. I tried put right UPDATE to SD card but no luck
Bootloader: locked
FRP: locked
debbuging: off
Please help me.
no one knows how to fix our problem so sad
Please close the thread
problem issue solved!
please help me same problem as you...
JCB117 said:
please help me same problem as you...
Click to expand...
Click to collapse
Easily Unbrick Your Phone via this method
https://forum.xda-developers.com/p9/help/huawei-p9-brick-easiest-to-unbrick-t3662350
Hello, today I tried to install a custom rom on my xiaomi mi5x, so I unloocked the bootloader and installed twrp, than I installed the android one rom .The problem was that I had to verify my gmail because it got locked, so I looked up a way to bypass that lock. I followed a youtube video on how to bypass that lock on android one, and now my phone has the following issue:
After booting I only see the MI logo for about a second, than it goes into black screen, same thing happens when I try to boot to recovery.
The only thing that works is fastboot.
Please help me!
Go into fastboot and write following command:
fastboot boot twrp.img
Click to expand...
Click to collapse
You will enter a recovery mode. There you could try a factory reset or flash a new ROM.\
If this wont` help, you could flash a new ROM via fastboot also.
SoNhater said:
Go into fastboot and write following command:
You will enter a recovery mode. There you could try a factory reset or flash a new ROM.\
If this wont` help, you could flash a new ROM via fastboot also.
Click to expand...
Click to collapse
hi sir, i am facing also the same problem. and in my case every time i tried that code here is the output
FAILED (remote: unlock device to use this command)
i know that i already unlocked this before.
I would recommend that you flash the official firmware (fastboot version). Please follow the instructions here http://en.miui.com/a-234.html.
I need "emmc_appsboot.mbn" file from a working MD E2 devices.
Any body can help me pls. My mi5x device is now on black secreen. Not openning..
it became after load orijinal rom onto oxygen boot.
Any body can help me pls
I need "emmc_appsboot.mbn" file from a working MD E2 devices.
eman78 said:
I need "emmc_appsboot.mbn" file from a working MD E2 devices.
Any body can help me pls. My mi5x device is now on black secreen. Not openning..
it became after load orijinal rom onto oxygen boot.
Any body can help me pls
I need "emmc_appsboot.mbn" file from a working MD E2 devices.
Click to expand...
Click to collapse
Have you find a solution sir ?
I already have tried to flash in EDL mode but when the flashing is done the phone did not reboot, plugged in the charger, and connected to the computer only received
qualcomm Hs-usb Diagnostics 900e