Xiaomi Mi 5x Bricked, Need help. - Xiaomi Mi 5X Questions & Answers

Hello, today I tried to install a custom rom on my xiaomi mi5x, so I unloocked the bootloader and installed twrp, than I installed the android one rom .The problem was that I had to verify my gmail because it got locked, so I looked up a way to bypass that lock. I followed a youtube video on how to bypass that lock on android one, and now my phone has the following issue:
After booting I only see the MI logo for about a second, than it goes into black screen, same thing happens when I try to boot to recovery.
The only thing that works is fastboot.
Please help me!

Go into fastboot and write following command:
fastboot boot twrp.img
Click to expand...
Click to collapse
You will enter a recovery mode. There you could try a factory reset or flash a new ROM.\
If this wont` help, you could flash a new ROM via fastboot also.

SoNhater said:
Go into fastboot and write following command:
You will enter a recovery mode. There you could try a factory reset or flash a new ROM.\
If this wont` help, you could flash a new ROM via fastboot also.
Click to expand...
Click to collapse
hi sir, i am facing also the same problem. and in my case every time i tried that code here is the output
FAILED (remote: unlock device to use this command)
i know that i already unlocked this before.

I would recommend that you flash the official firmware (fastboot version). Please follow the instructions here http://en.miui.com/a-234.html.

I need "emmc_appsboot.mbn" file from a working MD E2 devices.
Any body can help me pls. My mi5x device is now on black secreen. Not openning..
it became after load orijinal rom onto oxygen boot.
Any body can help me pls
I need "emmc_appsboot.mbn" file from a working MD E2 devices.

eman78 said:
I need "emmc_appsboot.mbn" file from a working MD E2 devices.
Any body can help me pls. My mi5x device is now on black secreen. Not openning..
it became after load orijinal rom onto oxygen boot.
Any body can help me pls
I need "emmc_appsboot.mbn" file from a working MD E2 devices.
Click to expand...
Click to collapse
Have you find a solution sir ?

I already have tried to flash in EDL mode but when the flashing is done the phone did not reboot, plugged in the charger, and connected to the computer only received
qualcomm Hs-usb Diagnostics 900e​

Related

is this hard or soft brick? help me please :(

please help.
before my Mi 5x already unlocked bootloader using MIUI.eu Rom
then yesterday i tried to flash GCam app using my laptop
then suddenly my phone turned off and it only shows only Mi logo for a split seconds then black screen.
I tried to flash again via fastboot(because i cant access the recovery) but it shows on the results that its FAILED remote: unlock device to use this command.
is that mean that my 5x that is already unlocked before got relocked? so how will i flash again if i cant open my phone and only fastboot is working
please guys help
I need "emmc_appsboot.mbn" file from a working MD E2 devices.
Any body can help me pls. My mi5x device is now on black secreen. Not openning..
it became after load orijinal rom onto oxygen boot.
Any body can help me pls
I need "emmc_appsboot.mbn" file from a working MD E2 devices.
pauloflores15 said:
please help.
before my Mi 5x already unlocked bootloader using MIUI.eu Rom
then yesterday i tried to flash GCam app using my laptop
then suddenly my phone turned off and it only shows only Mi logo for a split seconds then black screen.
I tried to flash again via fastboot(because i cant access the recovery) but it shows on the results that its FAILED remote: unlock device to use this command.
is that mean that my 5x that is already unlocked before got relocked? so how will i flash again if i cant open my phone and only fastboot is working
please guys help
Click to expand...
Click to collapse
We have the EXACT problem. Hope someone can help us.
Same problem... i'm getting desperate
I resolved it...
The problem is that the bootloader has locked again, you will need to remake the bootloader unlock process. So Download "mi flash unlock tool" again and use your account to unlock it
Sorry for my bad english... :s
Lokomotivv said:
We have the EXACT problem. Hope someone can help us.
Click to expand...
Click to collapse
Did you find any solution??

[URGENT HELP] Pure stock Redmi 4A bricked (No Usb debugging or anything enabled)

Hey Guys,
One of my younger brother some how managed to brick a stock 4A, and when starting it up, its stuck at the MI logo, however I am able to go in the Fastboot and stock recovery via the side volume and power buttons and the phone is charging while powered off.
I have tried factory resting via the stock recovery, but no use, still stuck at the logo.
Is there any app or software like odin (for Samsung), where I can flash a stock Rom in fastboot via my pc? If so can you please share the link to the thread or step by step instructions to do so?
i want to share again, its stock with no Xiaomi account or any USB debugging enabled from the developer options as it is pure stock. I have also attached the pictures of the phone with this message (I know it won't help, but just in case).
I want to thank every one for giving me their time in assisting me in resolving this issue.
Have a great day.
This guide might help you
http://www.99mediasector.com/flash-xiaomi-device-without-unlock-bootloader/
For procedure you can refer
Sorry not able to help u fully because of my time issues
According to me u can still flash miui ROM via fast boot (even when locked)
Use mi flash tool for that (link
https://xiaomiflashtool.com/ )
U need to only use fast boot roms to flash
Link http://en.miui.com/a-234.html <---- select redmi 4a global rom from it
See the YouTube vid for process
rseragon said:
This guide might help you
http://www.99mediasector.com/flash-xiaomi-device-without-unlock-bootloader/
For procedure you can refer
Sorry not able to help u fully because of my time issues
According to me u can still flash miui ROM via fast boot (even when locked)
Use mi flash tool for that (link
https://xiaomiflashtool.com/ )
U need to only use fast boot roms to flash
Link http://en.miui.com/a-234.html <---- select redmi 4a global rom from it
See the YouTube vid for process
Click to expand...
Click to collapse
Thank you bro, I tried, it, firstly it said Error: Flash Tz error" on flashing the rom via Mi flash. I did extracted it two times as stated and also tried extracting it once and I also tried placing the folder in C:/ drive (root), but the problem persists.
Also, I tried changing the drivers in device manager, but no use. I also downloaded ADB drivers, which gave me Xiaomi adb boot loader drivers but same issue.
Regarding the EDL, double clicking on edl.cmd, just reboots the phone to "MI" logo again and no black screens or red led light to show that its in the EDL mode, and I did tried flashing on the MI logo but the same results.
Please help.
Hassan Aftab said:
Thank you bro, I tried, it, firstly it said Error: Flash Tz error" on flashing the rom via Mi flash. I did extracted it two times as stated and also tried extracting it once and I also tried placing the folder in C:/ drive (root), but the problem persists.
Also, I tried changing the drivers in device manager, but no use. I also downloaded ADB drivers, which gave me Xiaomi adb boot loader drivers but same issue.
Regarding the EDL, double clicking on edl.cmd, just reboots the phone to "MI" logo again and no black screens or red led light to show that its in the EDL mode, and I did tried flashing on the MI logo but the same results.
Please help.
Click to expand...
Click to collapse
Wow wait were u trying edl or fastboot
The method I provided is for fastboot not for edl(though most of it same except u need to remove the back cover and do something)
If u think u can really do edl mode flashing the see this vid
Link :-
I think edl is the only method to fix this problem
I reccomend you to give ur phone to a shopkeeper to do it
If u think u can DL the thing that guy did in that vid u r free to go ahead

Redmi 4 (Santoni) bricked. Please help.

I unlocked my redmi 4 (Santoni) boot loader and flashed pixel experience ROM (https://mega.nz/#F!INZgnAZI!9fuWhfCuazOO5YPBjxGlmA). It was working fine for a few days (Small heating issue was there). Then one day while i was charging the phone the phone turned off and never turn back on. When i try to switch on the mi logo flashes for a split second and then turns off. I tried to get into recovery but couldn't.
I can get into fastboot mode. I tried flashing the phone using Mi flash tool and fastboot rom. But it shows an error "flash tz error". When i tried an old version of mi flash tool i get the "Unspecified error (0x80004005: FAILED (remote: Critical partition flashing is not allowed))
Please Help.....
can you access the twrp?
foneiamone said:
can you access the twrp?
Click to expand...
Click to collapse
No. I can only access fastboot.
Somebody please help...
unbrick
u can get to edl fastboot with testpoints.
redmi 4x edl fastboot
in edl fastboot flashing should work again :angel:
PierceB said:
u can get to edl fastboot with testpoints.
redmi 4x edl fastboot
in edl fastboot flashing should work again :angel:
Click to expand...
Click to collapse
Dont know how to do that. But i saw some tutorials on how to. Gonna try it. Thank you for the suggestion.
jaseemharry said:
Dont know how to do that. But i saw some tutorials on how to. Gonna try it. Thank you for the suggestion.
Click to expand...
Click to collapse
Did already share a description! https://forum.xda-developers.com/showpost.php?p=74818435&postcount=3 Or U can buy a deepflash cable this should also work.
jaseemharry said:
No. I can only access fastboot.
Click to expand...
Click to collapse
Have you tried installing TWRP via fastboot?
I had the same exact problem, i put my phone on charge & when i came back to check it was switched off. It wouldn't turn on except the mi logo. I tried to flash through fastboot turns out my bootloader was re-locked for some reason. I had to re-unlock it then proceed on to fash fastboot miui rom. Check if your bootloader is locked or not.
foneiamone said:
Have you tried installing TWRP via fastboot?
Click to expand...
Click to collapse
obstinate_penguin said:
I had the same exact problem, i put my phone on charge & when i came back to check it was switched off. It wouldn't turn on except the mi logo. I tried to flash through fastboot turns out my bootloader was re-locked for some reason. I had to re-unlock it then proceed on to fash fastboot miui rom. Check if your bootloader is locked or not.
Click to expand...
Click to collapse
This is a good idea! Probably u first try to install trwp in fastboot mode. If this doesn't work try to unlock bootloader again and then install trwp.
When all these Option doesn't work u still can open the phone and use edl fastboot mode to flash miui again.
jaseemharry said:
I unlocked my redmi 4 (Santoni) boot loader and flashed pixel experience ROM (https://mega.nz/#F!INZgnAZI!9fuWhfCuazOO5YPBjxGlmA). It was working fine for a few days (Small heating issue was there). Then one day while i was charging the phone the phone turned off and never turn back on. When i try to switch on the mi logo flashes for a split second and then turns off. I tried to get into recovery but couldn't.
I can get into fastboot mode. I tried flashing the phone using Mi flash tool and fastboot rom. But it shows an error "flash tz error". When i tried an old version of mi flash tool i get the "Unspecified error (0x80004005: FAILED (remote: Critical partition flashing is not allowed))
Please Help.....
Click to expand...
Click to collapse
No big problem just go in edl mode
Search how to go in edl Redmi 4 in Google
Problem is your boot loader is locked
Harshad patel R said:
No big problem just go in edl mode
Search how to go in edl Redmi 4 in Google
Problem is your boot loader is locked
Click to expand...
Click to collapse
but he already unlocked his bootloader before so it should be easier to unlock in again and then flash whatever he wants...
PierceB said:
but he already unlocked his bootloader before so it should be easier to unlock in again and then flash whatever he wants...
Click to expand...
Click to collapse
One time fail in flashing = locked boot loader
Or for unlocking bootloader from official (easy) need live mobile not dead
foneiamone said:
Have you tried installing TWRP via fastboot?
Click to expand...
Click to collapse
Tried but failed. Boot loader was locked again somehow.
PierceB said:
This is a good idea! Probably u first try to install trwp in fastboot mode. If this doesn't work try to unlock bootloader again and then install trwp.
When all these Option doesn't work u still can open the phone and use edl fastboot mode to flash miui again.
Click to expand...
Click to collapse
Tried unlocking boot loader and was not successful because the phone was bricked. My only option was to use edl test point. Now i installed miui 11. (Aprart from some minor bugs which can be eliminated by reflashing some other roms) Thank you guys. Now my phone is successfully unbricked.
For somebody who is having the same issues,
My phone (Redmi 4_Santoni) was completely bricked. The only thing i can access was fastboot by pressing the volume down + Power button combination. But i could not install twrp or any other recovery because my boot loader was locked. I got it fixed completely with the help of you guys (Thanks again) and i want to share the procedure i went through.
Condition: Completely bricked with only fastboot access, Locked bootloader.
I tried this video (https://www.youtube.com/watch?v=j27x5iJSS40) but failed because i could not access recovery. So my only solution was to use edl test point flashing. I followed this guide https://forum.xda-developers.com/showpost.php?p=74818435&postcount=3. It was very easy to do. But in the device manager (Press Windows key + R and then type devmgmt.msc and press enter) instead of showing "Qualcomm HS-USB QDloader 9008", the device is shown as "Qualcomm HS-USB Diagnostics 900E". The problem was you have to plug in in USB cable while the test points is being connected with a pair of tweezers or a paperclip as shown in the link above.
Make sure you already downloaded the latest mi flash tool from here https://xiaomiflashtool.com/ and download fast boot rom from the official website. (Go to https://en.miui.com/ Click rom downloads. Click flashing guide. Download the fastboot rom from there for your device.) Now flash your device using mi flash tool and voila. your phone is unbricked.
Thank you guys..

Phone in Hard Brick mode

I was trying to install Arrow OS custom ROM to Motorola one power using TWRP. It got flashed, when I flashed the Gpps Rom with it, it didn't flashed and I rebooted the phone right there. The phone is now in a hard brick mode and is not responding to anything, is there anything I can do to fix it? Could you please guide me with the complete procedure?
You must use a blankflash to boot bootloader.BlankFlash available for
Moto One Power (Chef) https://mirrors.lolinet.com/firmware/moto/chef[/
.1 install Motorola drivers,2 install quallcom drivers for Motorola procesor(gsmusbdrivers.com/download/qualcomm-hs-usb-qdloader-9008-driver-64-bit-windows) .3 use flashbat in blankflash directory,4 press volume down and power on phone.5 connect phone with pc and proces will be starting.if your phone starting in bootloader mode ,you can flash stock room
Thank you for your help and response. I followed the steps as you mentioned. On step 3 when I run the Flashbat file, It gives the below error, and the phone never started
[112.478] ReadFile() failed, GetLastError()=0
[125.434] ReadFile() failed, GetLastError()=0
when blankflash starting you can release the wolume and power.try differrent usb port in pc.I have the same problem with custom roms,You see port com in device manager on pc?
It worked, but how did you know all this? Just spot on :good:
I tried this method but not working on my phone, xt1942-1. This is the Chinese version p30 note I got from AliExpress. I see the device in device manager as port 9008
Any help would be appreciated!
Hi,you are try change a port USB in PC?this method works,my phone is the same like your,Moto p30 note from aliexpress
Thanks, I tried all usb ports on my pc but same problem. Should we press power and volume down buttons after connecting to pc? Please help I just got this phone today and bricked right away ...
Also there are two blankfash versions on the link you provided which one to use?
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
dadm said:
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
Click to expand...
Click to collapse
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
htcmusic said:
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
Click to expand...
Click to collapse
Hi @dadm I could not get my SIM card detected in RR rom and tried to flash stock again. Now I am in a bootloop whatever I do. Which stock did you use to revert back? And is your SIM card detected?
I have a few questions if anyone could answer. I am looking to get hands on this phone but making sure everything goes as I expect.
1.Does any member have knowledge which of this Device variants (XT1942-1, XT1942-2, XT-942-3) qualify for "Unlocking Boot-loader" and which variant does not support unlocking. I am lookig for 4/64gb Chef.
2. Is there Any Custom Pie Rom with Solid stability + Efficient & Effective Kernel?
3. Does stock Motorola Camera app works 100% in a custom flashed Rom as it does in Stock Rom or we have to use Google Pixel Camera apps as an alternative?
4. Is there anyway to get back to stock image from Custom rom.
5. How to recover the device from a Hard Brick.
6. Not but least. How well this device performs while playing PUBG.
Phone flashing locked and stuck at fastboot mode
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Ravi2730 said:
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Click to expand...
Click to collapse
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Thanks for reply
sd_shadow said:
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Problem solved
Ravi2730 said:
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Click to expand...
Click to collapse
Anyone stuck in fastboot when it shows your phone is corrupt and will not boot just flash the command
fastboot boot boot.img file in stock room phn will automatically start everything working it work as a flash...?

pls help me, strangest bootloop ever

Hi can somebody help me? i was on caos gsi and i tried to flash with fastboot the new global miui 12,now my phone wont boot.
i mean i still can access to fastboot and i tried to flash the gsi back,now my phone is stuck on '"redmi powered by android" but it's stuck there,no bootloop at all and i still can access recovery and fastboot
NorternLights said:
Hi can somebody help me? i was on caos gsi and i tried to flash with fastboot the new global miui 12,now my phone wont boot.
i mean i still can access to fastboot and i tried to flash the gsi back,now my phone is stuck on '"redmi powered by android" but it's stuck there,no bootloop at all and i still can access recovery and fastboot
Click to expand...
Click to collapse
May be your fastboot process failed...try again or go to recovery and clean all usure data
i tried,but now my phone is a pricey brick.
never again an mtk devices.
I have suffered this situation few days ago, I was using platform-tool to install MIUI 12.01 recovery rom using flash_all.bat but got bootloop everytime. Then I tried to flash the fastboot rom via Miflash tool and finally it booted up, it also re-locked bootloader after flashing, but the phone is live again!
I also tried to Wipe User Data in Recovery ([Volume up] + [Power]) before flashed the ROM with Miflash. Didn't know if it'd fixed the problem.
Have you try spflash tool yet?
fortunately i was able to recover the device using miflashtool then i sold it and i bought a redmi 9s
dont buy mtk devices guys,worst experience ever
You must know what you do on MTK than its ok!!!
-CALIBAN666- said:
You must know what you do on MTK than its ok!!!
Click to expand...
Click to collapse
Mtk is made for poor people..if mtk is not available then we can not buy a smart phone....

Categories

Resources