Hi,
I just rooted my blu r1 hd and confirmed it by opening my #supersu app. I have root access. But I still am unable to make my phone detect my otg usb. I tried usb otg helper - but that doesnt seem to help. I tried stickmount and it doesnt work.
Can someone please help?
Thanks so much
ravishankar_sitar said:
Hi,
I just rooted my blu r1 hd and confirmed it by opening my #supersu app. I have root access. But I still am unable to make my phone detect my otg usb. I tried usb otg helper - but that doesnt seem to help. I tried stickmount and it doesnt work.
Can someone please help?
Thanks so much
Click to expand...
Click to collapse
Out of Box the R1 doesn't support OTG, there was a report of someone making it work with a powered hub. But BLU states no OTG.
Used other checker
Hi,
Mi used otg checker and it confirms that my rooted device supports otg. It did not say that before rooting. But still my device does not recognize otg.
Please help.
Thanks
ravishankar_sitar said:
Hi,
Mi used otg checker and it confirms that my rooted device supports otg. It did not say that before rooting. But still my device does not recognize otg.
Please help.
Thanks
Click to expand...
Click to collapse
As stated, the R1 does not support OTG. You can try a powered OTG hub, but your not going to get enough power from the USB port alone on the R1.
Hi Kal250,
Thanks for your reply. Please excuse my ignorance. What is a powered otg hub?
Can you please give an amazon link as a product example?
Your help is much appreciated. I understand that you are saying that it may/may not work. But I want to give it a try.
Thanks so much
ravishankar_sitar said:
Hi Kal250,
Thanks for your reply. Please excuse my ignorance. What is a powered otg hub?
Can you please give an amazon link as a product example?
Your help is much appreciated. I understand that you are saying that it may/may not work. But I want to give it a try.
Thanks so much
Click to expand...
Click to collapse
I can't verify that this will work, there was only one user who reported success using an adapter, though I can no longer find the post, anyhow you can give this a try, you will have to supply power with a charger cable, but I make no guarantee as to if it will work. BLUs official statement is no support for OTG. I'm not responsible if you damage your device(s)!!
https://www.amazon.com/gp/aw/d/1059...ed+adapter&dpPl=1&dpID=41e4lIWfNlL&ref=plSrch
kal250 said:
I can't verify that this will work, there was only one user who reported success using an adapter, though I can no longer find the post, anyhow you can give this a try, you will have to supply power with a charger cable, but I make no guarantee as to if it will work. BLUs official statement is no support for OTG. I'm not responsible if you damage your device(s)!!
https://www.amazon.com/gp/aw/d/1059...ed+adapter&dpPl=1&dpID=41e4lIWfNlL&ref=plSrch
Click to expand...
Click to collapse
Thanks a lot kal250! I am going to give it a try!
ravishankar_sitar said:
Thanks a lot kal250! I am going to give it a try!
Click to expand...
Click to collapse
Did you try the powered usb hub?
wfandreas said:
Did you try the powered usb hub?
Click to expand...
Click to collapse
I dont think it will work, i believe only one user reported that, and nobody has verified....
kal250 said:
I dont think it will work, i believe only one user reported that, and nobody has verified....
Click to expand...
Click to collapse
I'll try it this weekend.
Holy crap, can confirm.
I first tried using this powered hub, as well as a powered usb otg cord (similar to this one), it read my generic usb stick, as well as a 500gb HD (well, sorta, it saw it but can't read ext4).. Then I tried just the otg cord, powered, and it worked. As long as it was getting external power, it seemed to work just fine.
Bare in mind, it "NEEDS" the powered OTG cord, running it without having a micro usb hooked up to power in and it didn't work at all, at least for me. Though you can run the hub without power, don't know why this is, but it was how it was acting.
Non drive testing:
It also sorta saw my Logitech F310. In that it pops up that it is disconnecting, but never shows up while connected (with gba.emu). A 360 controller did nothing.
Mouse and Keyboard worked just fine.
USB Audio seemed to not work, at least with my crappy Griffin iMic (think it is an apple device, I got it at goodwil). I also tried a Logitech usb speaker (not sure what model). No audio came though, thought the buttons worked (play/stop/volume/skip). All this with "Disable USB audio routing" not on (as well as on, just in case i was misreading it).
I also have a Pinnacle Systems AV to USB2 (old school rca video cables to usb) adapter I "could" check, however I know of no android app that can take that in. I do know it works with linux by default, ala V4L2, but android is a mystery. It does light up, but other then that no idea, looking through dmesg was a bust for me at least. Eh, nitch item anyways, doubt much here would use it.
Can't think of anything else to test at the moment, but I hope this helps you guys out a bit.
Tried the powered OTG cable and was able to mount a USB flash drive. I did not have to root my R1 HD to get this to work. The mounted drive did not show in ES Explorer or in Solid Explorer. But I can go to Settings -> Storage & USB and click on the mounted drive. That puts me in the system file explorer and I can copy files. (Do choose "Show SD Card" in the menu. Otherwise there are not many places to copy to.)
---------- Post added at 11:49 PM ---------- Previous post was at 11:20 PM ----------
Following up: of course you have supply power to the microUSB port of the powered OTG cable. I tried supplying power from an AC adapter and from an external battery both worked.
Another note: to copy files from the USB flash drive to internal SD or external SD, click on the USB Drive (in Settings->Storage & USB) first, select some files. Then, navigate to the place where you want the copy. If you want to copy to the USB drive, then click on the internal or external SD card (in Settings->Storage & USB) and do the same thing.
I got OTG to work with a powered OTG cable but I couldn't get UVC to work
Has anybody else tried using a USB camera?
Sent from my R1 HD using Tapatalk
I bought a Blu R1 specifically to use in a pair of Gear-like VR goggles, as an FPV headset for quadcopter flight. I was hoping to wire (solder) a wireless receiver to a USB UVC stick, run Go FPV (split-screen Cardboard-like vid player), and power all with a 10k mAh power bank battery.
I'm hoping the UVC not working is just a case of a missing driver. Can you (moshiach101) load a webcam app from PlayStore and see if that installs drivers?
zx2gsxr said:
I bought a Blu R1 specifically to use in a pair of Gear-like VR goggles, as an FPV headset for quadcopter flight. I was hoping to wire (solder) a wireless receiver to a USB UVC stick, run Go FPV (split-screen Cardboard-like vid player), and power all with a 10k mAh power bank battery.
I'm hoping the UVC not working is just a case of a missing driver. Can you (moshiach101) load a webcam app from PlayStore and see if that installs drivers?
Click to expand...
Click to collapse
OK. I tried it with a USB wall-mount charger, USB-C micro in a brand new power OTG cable, with a Logitech V-U0007 webcam which was shown to work on a PC.
No dice. I conclude the Blu R1 HD does not support UVC via the USB port.
(and the phone is completely useless to me as I have a good phone and Sprint plan for the family already...)
Is there a way to add the UVC driver to the phone?
Is it part of the ROM, kernel?
Sent from my R1 HD using Tapatalk
moshiach101 said:
Is there a way to add the UVC driver to the phone?
Is it part of the ROM, kernel?
Sent from my R1 HD using Tapatalk
Click to expand...
Click to collapse
It should be added by adding an app which needs it.
The UVC setup works with my HTC One M7. Not with the Blu, so I think this is a HW/FW limitation.
Try OTG Patch or similar from playstore
guliver365 said:
Try OTG Patch or similar from playstore
Click to expand...
Click to collapse
No dice (I just tried). Pretty sure it's an MTK processor, which doesn't do OTG, and probably why it's cheap enough to sell at this pricepoint.
ravishankar_sitar said:
Hi,
I just rooted my blu r1 hd and confirmed it by opening my #supersu app. I have root access. But I still am unable to make my phone detect my otg usb. I tried usb otg helper - but that doesnt seem to help. I tried stickmount and it doesnt work.
Can someone please help?
Thanks so much
Click to expand...
Click to collapse
Use a powered hub I have tried and it works for most devices (keyboards, mice, and USB drives), but for other devices such as an arduino, which is what I needed, use USB Host Diagnostics to install a patch.
Related
Forgive me if a stupid question but the new rage going on is the new USB support for our NCs, what exactly can I do with that functionality now? Examples would be nice. Is it just simple stuff like keyboards, etc?
All of this is unconfirmed, but what I've seen mentioned includes webcams and game controllers in addition to keyboards/mice.
mass storage devices will work as well if you have an external power source
Another stupid question from my side:
How WILL this USB connectivity work? Meaning we connect any USB enabled device to the micro-USB port of the nook from which the charger connects?
That would be cool since that would enable USB keyboards to work with the nook..
obsidianblackhawk said:
mass storage devices will work as well if you have an external power source
Click to expand...
Click to collapse
And many USB thumb drives work without any external power at all. Not all of them, but an older 2GB of mine works perfectly (especially with the vold file modified so that mass storage devices auto mount)
Divine_Madcat said:
And many USB thumb drives work without any external power at all. Not all of them, but an older 2GB of mine works perfectly (especially with the vold file modified so that mass storage devices auto mount)
Click to expand...
Click to collapse
Would you mind sharing your vold line? Does it work regardless of the sdx partition actually mounted? (In other word, is it wildcarded for any type of flash, or just for your particular drive)
skwalas said:
Would you mind sharing your vold line? Does it work regardless of the sdx partition actually mounted? (In other word, is it wildcarded for any type of flash, or just for your particular drive)
Click to expand...
Click to collapse
This is all i used (the example line): http://forum.xda-developers.com/showpost.php?p=14548442&postcount=159
all of my micro usb cards work with a reader.
perhaps they need lesser power to run
So basically, I can plug up a webcam and video chat with a market app? Or am I being too wishful?
Still rocking the Incredible with the XDA Premium App.
flu13 said:
All of this is unconfirmed, but what I've seen mentioned includes webcams and game controllers in addition to keyboards/mice.
Click to expand...
Click to collapse
Is there a Keyboard/Mouse that will work with the Nook that anyone is using today? Of course, I don't understand how a mouse would work because there is no pointer/cursor in Android is there?
I'd love to be able to have a mouse/keyboard and not have to lug my laptop around on business trips but just use the Nook instead. May be wishful thinking I suppose.
As soon as you connect a mouse, a pointer appears.
flu13 said:
As soon as you connect a mouse, a pointer appears.
Click to expand...
Click to collapse
Cool, I'll have to monkey with this I suppose. Sounds promising.
flu13 said:
As soon as you connect a mouse, a pointer appears.
Click to expand...
Click to collapse
Cool, thanks. I have a few micro USB cables and a couple of female to female adapters on the way so I can hook a USB mouse and keyboard up to the cables.
flu13 said:
As soon as you connect a mouse, a pointer appears.
Click to expand...
Click to collapse
Did you need a powered USB hub for this, or does the nook power the mouse?
Requia said:
Did you need a powered USB hub for this, or does the nook power the mouse?
Click to expand...
Click to collapse
Depends on the mouse. If the mouse can run on 100mA, it will work with no hub (personally tested with a Logitech wireless).
Just wondering if anyone knows whether they've gotten the usb headphones with mic to work. I've been following that usb thread in development pretty closely (although I can't post there; not enough general posts, so I guess I'll have to start spamming), and it appears as though they are close, but I haven't seen a post definitely stating that it works. Seems as though they were getting some noise through the mic, but the rate was off. Too fast or too slow or something. Maybe someone knows?
Which Female to Female adapter to get?
I found some Female to Female adapters on Amazon, but they had mixed reviews. If you are using one successfully , I would appreciate more information about where to get it.
-Mo
Moritzio said:
I found some Female to Female adapters on Amazon, but they had mixed reviews. If you are using one successfully , I would appreciate more information about where to get it.
-Mo
Click to expand...
Click to collapse
Same here. I bought one from ebay for $1.98 but what they sent did not match the description or picture so I killed the charge with AmEx.
As for webcam support, not working as far as I have been able to test. I can get the nook to recognize the cam but the apps do not see it. Have tried yahoo msgr,tango, ooVoo,fring, ect...
As for uses, mouse,keyboard,sd card reader,direct connection to DSLR's for photo transfer, flash drives.
As for flash drives, I have about 20 here from various mfr and only 1 will worrk without a powered hub but using a powered hub, everything works.
Sent from my NookColor using Tapatalk
I downloaded Nook Tweeks, enabled USB host mode and External vBus, but nothing happens when I connect a USB-stick via a micro ubs to usb converter.
Am I supposed to do something else? Or does the USB-stick have to be in some special format?
BrotherZero said:
I downloaded Nook Tweeks, enabled USB host mode and External vBus, but nothing happens when I connect a USB-stick via a micro ubs to usb converter.
Am I supposed to do something else? Or does the USB-stick have to be in some special format?
Click to expand...
Click to collapse
I got the same exact problem. It didn't seem to work at all.I think I'll have to order the adapter to see if the problem is the OTG cable or not
dannghiem0801 said:
I got the same exact problem. It didn't seem to work at all.I think I'll have to order the adapter to see if the problem is the OTG cable or not
Click to expand...
Click to collapse
I ordered some cheap ones from DX, but since there are two of them and none of them works I'm assuming it's the Nook the problem is with.
BrotherZero said:
I downloaded Nook Tweeks, enabled USB host mode and External vBus, but nothing happens when I connect a USB-stick via a micro ubs to usb converter.
Am I supposed to do something else? Or does the USB-stick have to be in some special format?
Click to expand...
Click to collapse
It could be the USB-sticks are trying to draw too much power. The Nook host port will only supply low power USB devices (<100mA) and it is also best to have a fairly well charged battery. Some sticks work and others don't.
If you have a powered USB hub then this supplies the power so there is no problem. So try with a powered hub to at least see if that is the issue.
bobtidey said:
It could be the USB-sticks are trying to draw too much power. The Nook host port will only supply low power USB devices (<100mA) and it is also best to have a fairly well charged battery. Some sticks work and others don't.
If you have a powered USB hub then this supplies the power so there is no problem. So try with a powered hub to at least see if that is the issue.
Click to expand...
Click to collapse
I used the same USB in this chart Nook Color USB HOST Device Compatibility List Sandisk Cruzer 8GB on CM7
I bought the Nook Color is to connect it to my camera via DSLRcontroller but so far still not successfully with USB stick.
Read my thread , it should answer most if not all your questions
[23 Jan 2012][USER/DEV] USB Host Support & Development [CM7/CM9]
I'm hoping to get some free time and update it this weekend with more info and probably a widget
I could never get usb host working on cm7. I have been trying to use RYC usb to control my Nikon Dslr . Once i switch over to CM9 beta it worked first time.
Sent from my Nook Color (CM9 ICS Beta)
Dj-Gutz said:
Read my thread , it should answer most if not all your questions
[23 Jan 2012][USER/DEV] USB Host Support & Development [CM7/CM9]
I'm hoping to get some free time and update it this weekend with more info and probably a widget
Click to expand...
Click to collapse
I have read this thread over and over again. Ill try to run CM9 soon to see if it works
Sent from my NookColor using Tapatalk
CM7 also shouldn't give you any trouble , as long as its FAT32 and you are using a hub
can you explain what exactly have you tried and provide logs?
I didnt use usb hub,just enable the usb host mode in Nook Tweak app and plug my usb via otg cable.
Sent from my MB508 using XDA App
Then you didn't read good enough the thread or the chart..
You need an external hub ( powered or non-powered ) to work with the sandisk cruzer.
Thanks a lot, i ll order one and try it out.
I tried to connect with my camera but nothing happened,I guess I have to try with usb hub as well
Sent from my MB508 using XDA App
So I'm currently running Carbon ROM B6 on my Nook HD+. I was hoping to connect a keyboard via USB to the Nook HD+. In order to do that, I figure I'd have to get a female to female USB adapter, and plug in the keyboard on one side, and the Nook in the other. Before I buy a female to female USB adapter, I figured I'd ask if this would even work. To take it one step further, could this work with any USB device at all, such as a mouse, flash drive, PC Xbox controller, etc?
It works on CM10. I am not sure if Carbon has that feature but USB adapter is only a couple of dollars.
Sent from my Galaxy Nexus using xda app-developers app
And the answer is?
RySean said:
So I'm currently running Carbon ROM B6 on my Nook HD+. I was hoping to connect a keyboard via USB to the Nook HD+. In order to do that, I figure I'd have to get a female to female USB adapter, and plug in the keyboard on one side, and the Nook in the other. Before I buy a female to female USB adapter, I figured I'd ask if this would even work. To take it one step further, could this work with any USB device at all, such as a mouse, flash drive, PC Xbox controller, etc?
Click to expand...
Click to collapse
SOOoo, did this work? Was a long time ago, was wondering if anything came of the attempt. MANY would like to know. Thanks!
Hoverbored said:
SOOoo, did this work? Was a long time ago, was wondering if anything came of the attempt. MANY would like to know. Thanks!
Click to expand...
Click to collapse
Yup, worked fine. I tested a keyboard and a mouse and both worked perfectly. I also tested an external HDD (Seagate Backup Plus) and was able to get that working with USB host mode turned on.
RySean said:
Yup, worked fine. I tested a keyboard and a mouse and both worked perfectly. I also tested an external HDD (Seagate Backup Plus) and was able to get that working with USB host mode turned on.
Click to expand...
Click to collapse
Did you manage to get the 360 controller to work?
Thanks
gotbass said:
Did you manage to get the 360 controller to work?
Thanks
Click to expand...
Click to collapse
For the Xbox Controllers you should be able to use the normal xpad kernel module, I will test that when my USB genderchanger arrives
Jann F said:
For the Xbox Controllers you should be able to use the normal xpad kernel module, I will test that when my USB genderchanger arrives
Click to expand...
Click to collapse
okay let me know how it works! very interested in doing that =)
gotbass said:
okay let me know how it works! very interested in doing that =)
Click to expand...
Click to collapse
as far as I know, those commands like under debian should do it:
Code:
su
modprobe xpad
I will test it as soon as possible
Jann F said:
as far as I know, those commands like under debian should do it:
Code:
su
modprobe xpad
I will test it as soon as possible
Click to expand...
Click to collapse
okay thanks =)
ive purchased a female to female usb adapter, would i not need a powered hub to get the controller working?
gotbass said:
okay thanks =)
ive purchased a female to female usb adapter, would i not need a powered hub to get the controller working?
Click to expand...
Click to collapse
I don't know, that depends on the electrical current it needs and reports to the host controller.
If a device is over that curent, the host controller will turn it off.
So if I buy a female-female adapter and plug in a usb stick I should to be to access the content i.e Movies?
Yes, but you need this apk installed on official cm builds.
http://nook.rootshell.ru/hd/USBHostSwitcher.apk
Jann F said:
Yes, but you need this apk installed on official cm builds.
http://nook.rootshell.ru/hd/USBHostSwitcher.apk
Click to expand...
Click to collapse
Hi
I've downloaded this and tried it but my Nook HD+ doesn't seem to do anything different after I have enabled the program and plugged in a usb stick. I'm running a nightly build of CM11 if that makes any difference.
Then your USB stick needs a too high current, try it with an actively powered USB hub.
Check out http://www.zen24223.zen.co.uk/TPUSBUMount6.apk
The instructions are here http://rootzwiki.com/topic/33033-otg-usb-insufficient-available-bus-toolthingy/
plug in your usb device and "press fix insufficient power req" button. works like a charm for my ps3 controller, no usb hub in between the controller and nook required.
Does the USB port have any other function other than power?
Don't think so, only power AFAIK.
I plugged it into my computer and even tried pressing and pressing/holding the button on the Chromecast but my computer didn't indicate any hardware plugged in.
I wonder if the data pins are even wired to anything internally.
UPDATE: The USB cable that comes with it may not work for data transfer, tried it with my phone and it didn't work. So I tried a normal microUSB cable but still nothing.
spunker88 said:
I plugged it into my computer and even tried pressing and pressing/holding the button on the Chromecast but my computer didn't indicate any hardware plugged in.
I wonder if the data pins are even wired to anything internally.
Click to expand...
Click to collapse
If we could plug a mouse or keyboard into it would be great!!
comatose1978 said:
If we could plug a mouse or keyboard into it would be great!!
Click to expand...
Click to collapse
It has bluetooth... so in theory that could be a simple alternative... we just need to figure out how to access hidden menus.
comatose1978 said:
If we could plug a mouse or keyboard into it would be great!!
Click to expand...
Click to collapse
I tried this with a self powered USB OTG cable, just to see if the Chromecast would blink, bing, or do anything to show recognition, no dice. Also tried booting with a USB drive in, no difference.
Universal Charger
Universal Charger:victory:
Examining board
Based on examining the photos of the motherboard on ifixit.com...
Component EM1 appears to be a USB Common Mode Choke. That goes on the D+/D- pair which you can see routed from the USB port, so it wouldn't be present if there wasn't some use for data communication over the USB port. (Cost sensitive equipment.) The flip side of the PCBA shows TP1-TP20 (Where TP19 and TP20 appear to be GND). My guess is in that mix you have a JTAG port for programming/testing the unit initially with a pogo pin rig (evidenced by the dimples observed in each of those locations), and there might be more high/low GPIO pins where one might allow the unit to enter its USB data mode.
-Jon
ften said:
I tried this with a self powered USB OTG cable, just to see if the Chromecast would blink, bing, or do anything to show recognition, no dice. Also tried booting with a USB drive in, no difference.
Click to expand...
Click to collapse
Is there any special kind of powered otg cable to work with this? I looked on Amazon but not sure. I want to grab one incase they make any progress on rooting this.
Sent from my HTCONE using Tapatalk 4 Beta
mustang_52 said:
Is there any special kind of powered otg cable to work with this? I looked on Amazon but not sure. I want to grab one incase they make any progress on rooting this.
Sent from my HTCONE using Tapatalk 4 Beta
Click to expand...
Click to collapse
Looks like its already been rooted. With what looks like a dual usb otg. They don't go deep into what specific cable but, I would guess it is a generic dual usb one off ebay, or amazon, heres a quick one i pulled from amazon http://www.amazon.com/Micro-Cable-P...8&qid=1375052489&sr=8-3&keywords=Dual+Usb+otg
But if you read into it, they say you can root, but unless your a developer you probably wont get any benefit of rooting....yet, if at all.
Obtaining root Link: http://blog.gtvhacker.com/2013/chromecast-exploiting-the-newest-device-by-google/
OneAn9ryN00b said:
Looks like its already been rooted. With what looks like a dual usb otg. They don't go deep into what specific cable but, I would guess it is a generic dual usb one off ebay, or amazon, heres a quick one i pulled from amazon http://www.amazon.com/Micro-Cable-P...8&qid=1375052489&sr=8-3&keywords=Dual+Usb+otg
But if you read into it, they say you can root, but unless your a developer you probably wont get any benefit of rooting....yet, if at all.
Obtaining root Link: http://blog.gtvhacker.com/2013/chromecast-exploiting-the-newest-device-by-google/
Click to expand...
Click to collapse
Please correct me if Im wrong, but the cable you linked only charges the thumbdrive/keyboard/mice/etc NOT the Chromecast so how would one root it since it does need power from usb plug? I've been searching for correct cable and cant find it; link to correct cable would be greatly appreciated!!!
This cable wouldnt work, right? http://www.ebay.com/itm/Usb-type-A-..._USB_Cables_Hubs_Adapters&hash=item4857e3608e
eurominican said:
Please correct me if Im wrong, but the cable you linked only charges the thumbdrive/keyboard/mice/etc NOT the Chromecast so how would one root it since it does need power from usb plug? I've been searching for correct cable and cant find it; link to correct cable would be greatly appreciated!!!
This cable wouldnt work, right? http://www.ebay.com/itm/Usb-type-A-..._USB_Cables_Hubs_Adapters&hash=item4857e3608e
Click to expand...
Click to collapse
I own that cable from Amazon and it should work. It brings in +5v from a charger connected to the female microUSB port and then splits it to the female full size USB port and the the male microUSB port so both the USB host device and the USB peripheral device are getting power.
spunker88 said:
I own that cable from Amazon and it should work. It brings in +5v from a charger connected to the female microUSB port and then splits it to the female full size USB port and the the male microUSB port so both the USB host device and the USB peripheral device are getting power.
Click to expand...
Click to collapse
I ordered this cable http://r.ebay.com/QgwBIW Will report back if it works when I get it.
eurominican said:
Please correct me if Im wrong, but the cable you linked only charges the thumbdrive/keyboard/mice/etc NOT the Chromecast so how would one root it since it does need power from usb plug? I've been searching for correct cable and cant find it; link to correct cable would be greatly appreciated!!!
Click to expand...
Click to collapse
I also bought that powered OTG cable off Amazon and it will power the Chromecast as well as provide the means to flash the Chromecast via a USB thumbdrive. When you apply power to the Chromecast, it automatically flashed the bin from the USB drive. There was no interaction required (or even possible). Of course this was on the original firmware - if your Chromecast updated itself, you have lost the ability to root the device at this time.
Clearly the Chromecast does sense the USB drive and pulls data from it during the initial boot sequence. However I'm not sure if it would ever work for other devices such as keyboards or storage devices, etc.
I'm not sure why anyone would want to hook those types of devices up to the Chromecast however. Once you have root, you can telnet into the device, so adding a keyboard doesn't seem that important. The whole idea of the device is that you send it media from other devices and control it via that other device. Adding storage for example doesn't seem important since it can pull media off the network already (ie a NAS or another computer).
Anyway. That has been my experience with it so far. It's a long winded answer to more than just your question about the OTG plug.
I would personally love the ability to send audio out without having an hdmi TV be on through the usb somehow...
Sent from my Nexus 7 using Tapatalk 4
USB Tethering not working - SGH-i997
Hi all,
i have install Avatar 7.0 to my Samsung SGH-i997 from "http://forum.xda-developers.com/showthread.php?t=2174227". it's look cool.
But when i am trying to USB Tethering, the massage shows as "Unfortunately,Setting has Stopped".
how to Fix this issue.
Hi, anybody knows if z1 can use external USB via OTG? Thanks
mlhdk said:
Hi, anybody knows if z1 can use external USB via OTG? Thanks
Click to expand...
Click to collapse
It works.
I just tested with a mouse
Thanks
Is there a OTG USB cable in the box or you need to buy one?
mlhdk said:
Thanks
Is there a OTG USB cable in the box or you need to buy one?
Click to expand...
Click to collapse
You need to buy one. but it's cheap anyway
Sent from my Xperia Z1
It does not work on mine. Tried an USB OGT adapter and an adapter cable (both worked on my Xperia S) Tried Dualshock 3 (because of that native support thingy) USB Keyboard and USB Mouse. No reaction. Device is rooted but bootloader is locked and I have stock firmware on it.
xshunin said:
It does not work on mine. Tried an USB OGT adapter and an adapter cable (both worked on my Xperia S) Tried Dualshock 3 (because of that native support thingy) USB Keyboard and USB Mouse. No reaction. Device is rooted but bootloader is locked and I have stock firmware on it.
Click to expand...
Click to collapse
can you check if this cable still work with your Xperia S? I've got my cable that worked with Xperia S and still work fine with z1
mlhdk said:
Hi, anybody knows if z1 can use external USB via OTG? Thanks
Click to expand...
Click to collapse
I tested it with an xbox 360 controller and it worked fine! The battery drain with it is ridiculous though!
I have two different OTG USB cables, with one it works fine with my ps3 controller, no reaction with the other cable. The one which works is a very short one, the not working cable is very long. But I don't thing the length is the reason.
i've got a feeling not all OTG cables work, i bought a generic one from amazon and when i try connecting a usb memory stick it says it has too much devices connected and i need to disconnect one for it to work. Has anyone bought one recently and it has worked, if so please provide a link if possible. thank you
sofir786 said:
i've got a feeling not all OTG cables work, i bought a generic one from amazon and when i try connecting a usb memory stick it says it has too much devices connected and i need to disconnect one for it to work. Has anyone bought one recently and it has worked, if so please provide a link if possible. thank you
Click to expand...
Click to collapse
I bought this one from Amazon (http://www.amazon.co.uk/gp/product/B005FUNQXS/ref=oh_details_o01_s00_i02?ie=UTF8&psc=1)
It arrived yesterday and I plugged the PS3 controller into the phone and it recognised it straight away.
I don''t know if it works with USB Drives or not, I don't have any to test, but it worked fine for what I needed it for, and cheap too.
Thanks mate, I'll give that a go
Sent from my C6903 using XDA Premium 4 mobile app
Just tried the USB OTG clip that i used on my HTC One and it doesn't show up a simple memory card? Which is weird as it's still working on other devices.
Would be good to find out what the problem is, is it a missing pin ? Or just the grade of the kit, plus certain USB OTG cables / clips are working for certain things and not for others, so PS3 will connect but memory won't mount on some, some nothing works on and others everything works, would be an idea to get some clarity on what cables do everything.
I'll test a few more when i get home, just confused as to why this one i've got doesn't work.