Database Develop

[ROM][5.1.1][LMY47V] 21 May- Stock Flashable Rom/Factory Image

Hello everyone, as requested by multiple users, here is a stock flashable rom based upon the newest 5.1.1 Factory Images, nothing more and nothing less
DISCLAIMER: I am not responsible for any damage done to your phone. If you brick your phone then it is not my fault if you do not follow the instructions.
21 May: Now updated to 5.1.1
Installation
1) Flash 1.07 radio from here: http://forum.xda-developers.com/showpost.php?p=60861281&postcount=2479
2) Flash latest makoz30f bootloader, If you have it installed already that's fine: http://forum.xda-developers.com/nexus-4/general/nexus-4-bootloader-collection-t2105983
3) Install latest TWRP: http://forum.xda-developers.com/nexus-4/orig-development/recovery-twrp-2-7-1-0-touch-recovery-t2002326
4) Perform wipe data/factory reset
5) Flash rom
6) Flash SU for root (optional)
http://forum.xda-developers.com/showthread.php?t=1538053
7) Wipe cache/dalvik.
8) Reboot & enjoy
Download:
https://www.androidfilehost.com/?fid=23991606952607927
MD5: f412be6c2e7f7f71e032e4b319e58025
Enjoy :good:

Old 5.1 Rom:
Installation
1) Flash 1.06 radio from here: http://forum.xda-developers.com/nexus-4/general/ref-mako-modem-collection-t2087227
2) Flash latest makoz30f bootloader: http://forum.xda-developers.com/nexus-4/general/nexus-4-bootloader-collection-t2105983
3) Install latest TWRP: http://forum.xda-developers.com/nexus-4/orig-development/recovery-twrp-2-7-1-0-touch-recovery-t2002326
4) Perform wipe data/factory reset
5) Flash rom
6) Flash SU for root (optional)
http://forum.xda-developers.com/showthread.php?t=1538053
7) Wipe cache/dalvik.
8) Reboot & enjoy
Download:
https://www.androidfilehost.com/?fid=95916177934556118
MD5: 9b857a5c8db478221f0ddc8c853be564
Enjoy :good:

22sl22 said:
Hello everyone, as requested by multiple users, here is a stock flashable rom based upon the newest 5.1 Factory Images.
Installation
1) Flash 1.06 radio from here: http://forum.xda-developers.com/nexus-4/general/ref-mako-modem-collection-t2087227
2) Flash latest makoz30f bootloader: http://forum.xda-developers.com/nexus-4/general/nexus-4-bootloader-collection-t2105983
3) Install latest TWRP: http://forum.xda-developers.com/nex...recovery-twrp-2-7-1-0-touch-recovery-t2002326
4) Perform wipe data/factory reset
5) Flash rom, followed by SU for root (optional)
http://forum.xda-developers.com/showthread.php?t=1538053
6) Wipe cache/dalvik.
7) Reboot & enjoy
Download:
https://www.androidfilehost.com/?fid=95916177934556118
MD5: 9b857a5c8db478221f0ddc8c853be564
Enjoy :good:
Click to expand...
Click to collapse
thank you very much [emoji2]

Zehlek said:
thank you very much [emoji2]
Click to expand...
Click to collapse
Your welcome mate
Might experiment with a few simple mods like volume rocker wake, center clock, implemented app ops etc. What do you think?

22sl22 said:
Your welcome mate
Might experiment with a few simple mods like volume rocker wake, center clock, implemented app ops etc. What do you think?
Click to expand...
Click to collapse
I always did like center clock. Maybe even left signal and data/WiFi if possible?

Is this rom stripped down stock ?

Zehlek said:
I always did like center clock. Maybe even left signal and data/WiFi if possible?
Click to expand...
Click to collapse
Yeah sure, i'll take a look to see what I can do :good:
xshallowgrave said:
Is this rom stripped down stock ?
Click to expand...
Click to collapse
It's just the stock Google factory image from here: https://developers.google.com/android/nexus/images
In a flashable zip form, nothing changed, no mods :good:

22sl22 said:
Yeah sure, i'll take a look to see what I can do :good:
It's just the stock Google factory image from here: https://developers.google.com/android/nexus/images
In a flashable zip form, nothing changed, no mods :good:
Click to expand...
Click to collapse
Okay

22sl22 said:
Yeah sure, i'll take a look to see what I can do :good:
It's just the stock Google factory image from here: https://developers.google.com/android/nexus/images
In a flashable zip form, nothing changed, no mods :good:
Click to expand...
Click to collapse
I don't know if it is possible but I remember on JB that some roms had a mod when you went to send our receive a MMS data would turn on and then off after it is sent/received. Therfore you would need to have data on in case some one sends you a pic

Zehlek said:
I don't know if it is possible but I remember on JB that some roms had a mod when you went to send our receive a MMS data would turn on and then off after it is sent/received. Therfore you would need to have data on in case some one sends you a pic
Click to expand...
Click to collapse
I don't really see the point of that mod. I don't see the point of having data turn on then off again and then you have to turn it on again to receive an MMS, unless I misread things.........

Thank you so much for this, I had CM from day 1 and really wanted to experience stock lollipop. A flashable zip is a life saver. Thanks a lot!

Flash-able Nexus4-33-106-lte-enabler-v2.12
Flash-able Nexus4-33-106-lte-enabler-v2.12 in case anyone wants working LTE on their device and don't know about the above mentioned. You also have to flash the 33-106 hybrid modem.
ferrocene: I created a 33/1.06 hybrid, it can be found in the hybrid thread, shortcut is
both the hybrid 33-106 modem and the lte-enabler can be found here.
https://drive.google.com/folderview...sharing&tid=0B77BTW0zStYCSTRIYWpZQS1nOWs#list

I remember htc sense ROMs on my old HTC one s would turn data on long enough to receive MMS messages. Very handy for someone like me that only turns on data when using it. For instance right now I'm keeping it off almost constantly until my billing cycle starts over cause I already went over my 2gb allowance.
Sent from my Nexus 4 using XDA Free mobile app

Any particular reasons for flashing the latest bootloader?

22sl22 said:
Hello everyone, as requested by multiple users, here is a stock flashable rom based upon the newest 5.1 Factory Images, nothing more and nothing less
DISCLAIMER: I am not responsible for any damage done to your phone. If you brick your phone then it is not my fault if you do not follow the instructions.
Installation
1) Flash 1.06 radio from here: http://forum.xda-developers.com/nexus-4/general/ref-mako-modem-collection-t2087227
2) Flash latest makoz30f bootloader: http://forum.xda-developers.com/nexus-4/general/nexus-4-bootloader-collection-t2105983
3) Install latest TWRP: http://forum.xda-developers.com/nex...recovery-twrp-2-7-1-0-touch-recovery-t2002326
4) Perform wipe data/factory reset
5) Flash rom
6) Flash SU for root (optional)
http://forum.xda-developers.com/showthread.php?t=1538053
7) Wipe cache/dalvik.
8) Reboot & enjoy
Download:
https://www.androidfilehost.com/?fid=95916177934556118
MD5: 9b857a5c8db478221f0ddc8c853be564
Enjoy :good:
Click to expand...
Click to collapse
Can you share the stock kernel please, it will very helpful
Thank before

arvynofikri said:
Can you share the stock kernel please, it will very helpful
Thank before
Click to expand...
Click to collapse
Sure, do you want just the file or a flashable zip?
Shrivel said:
Any particular reasons for flashing the latest bootloader?
Click to expand...
Click to collapse
You don't have to Reflash the bootloader, just make sure you have the latest one installed :good:
small2cats482 said:
Thank you so much for this, I had CM from day 1 and really wanted to experience stock lollipop. A flashable zip is a life saver. Thanks a lot!
Click to expand...
Click to collapse
No problem
Glad I could help :good:

@22sl22
Sure, do you want just the file or a flashable zip?
File ok, flashable zip will be nice [emoji4]

Flashable OTA.
Hi Sir,
Thanks for sharing this build with us,
but - could you assist (or create) a Flashable OTA zip?
for me, this will suite better, since I'm allready running the latest version of android (before the 5.1).
thanks again,
FM

arvynofikri said:
@22sl22
Sure, do you want just the file or a flashable zip?
File ok, flashable zip will be nice [emoji4]
Click to expand...
Click to collapse
Here you go, file is attached to this post in a flashable zip :good:
ForMartha said:
Hi Sir,
Thanks for sharing this build with us,
but - could you assist (or create) a Flashable OTA zip?
for me, this will suite better, since I'm allready running the latest version of android (before the 5.1).
thanks again,
FM
Click to expand...
Click to collapse
What's the difference between the OTA and this file? You might as well flash this because it's stock or just use the official downloadable OTA link that will deliver it as an OTA

22sl22 said:
Here you go, file is attached to this post in a flashable zip :good:
What's the difference between the OTA and this file? You might as well flash this because it's stock or just use the official downloadable OTA link that will deliver it as an OTA
Click to expand...
Click to collapse
thanks for stock kernel in flashable zip packet i was about to ask you for this :good:

First european rom

Just released.
http://xiaomi.eu/community/threads/5-6-11.27706/

SToNeD said:
Just released.
http://xiaomi.eu/community/threads/5-6-11.27706/
Click to expand...
Click to collapse
Well spotted you flashed it? If so via twrp with full wipe?
What about GAPPS is it 64bit version?
Are we downloading for LEO?
Jeez to many questions, just think someone might mess up.
I'll test and report back.

jazz452 said:
Well spotted you flashed it? If so via twrp with full wipe?
What about GAPPS is it 64bit version?
Are we downloading for LEO?
Jeez to many questions, just think someone might mess up.
I'll test and report back.
Click to expand...
Click to collapse
So I downloaded the EU rom, make sure you download for Leo, installed via TWRP with full wipe as per instructions. To be honest if your from uk no point its still english US not UK, For everyone else yea go for it no problems and Playstore included.

Is there no improvements from 6.5.1.0 version?
Also how do I flash twrp on my phone? Do I need root?
Thanks

jazz452 said:
So I downloaded the EU rom, make sure you download for Leo, installed via TWRP with full wipe as per instructions. To be honest if your from uk no point its still english US not UK, For everyone else yea go for it no problems and Playstore included.
Click to expand...
Click to collapse
Can you tell me if German is included? Cant find it in the list on xiaomi.eu - now I'm a little bit unsure.

Can't see German even after installing.
Sent from my MI NOTE Pro using XDA Free mobile app

European Modem??
Hi,
Have you tried if also is changed the modem to accept the european 4G??. In Spain does not work the 4G....
Any tutorial or link how to flash TWRP??

langas said:
Hi,
Have you tried if also is changed the modem to accept the european 4G??. In Spain does not work the 4G....
Any tutorial or link how to flash TWRP??
Click to expand...
Click to collapse
Here you go bro :
http://en.miui.com/thread-118114-1-1.html

I just flashed this rom and i can confirm that it works well here in the uk on the ee 4g network no problems for me and very happy with this phone

Are there any instructions on how to install it?
I found TWRP, but need root to install it which i don't have.

Just boot to TWRP first via fasboot by using fastboot boot twrp.img command,
Then flash supersu,
After u got root access, install flashify and flash twrp

Is French included in this ROM? Probably not...
Will my apps be in French anyway or will it go like the UI?

Hi - I tried installing the most recent stable version for the Note Pro (xiaomi.eu_multi_leo_V6.6.3.0.LXHCNCF_v6-5.0) and it was completely unusable. Lots of system processes failing etc. Has everyone else had this experience or am I doing something wrong? I installed initially through TWRP, then also tried through MiRecovery.
Just got the phone and really liking it, but very keen to get it working more like a UK phone! Great to see there's people working on this!!!

gavjs said:
Hi - I tried installing the most recent stable version for the Note Pro (xiaomi.eu_multi_leo_V6.6.3.0.LXHCNCF_v6-5.0) and it was completely unusable. Lots of system processes failing etc. Has everyone else had this experience or am I doing something wrong? I installed initially through TWRP, then also tried through MiRecovery.
Just got the phone and really liking it, but very keen to get it working more like a UK phone! Great to see there's people working on this!!!
Click to expand...
Click to collapse
It works fine for me in UK, full wipe in TWRP? You said first with TWRP and then Mi, did you reflash original recovery. I always find that after flashing a new rom I have to reflash GAPPS or I get the problems you describe.

I had been unsure if the 'Wipe All' would also scrub the ROM zip file, so did not do this first time.
This time I did wipe everything, which also resulted in the ROM zip file being deleted.
Managed to sideload it and everything is now working! Many thanks for the suggestion. And for future, should I be wiping everything, or is there a way to avoid the sideload?
Thanks

gavjs said:
I had been unsure if the 'Wipe All' would also scrub the ROM zip file, so did not do this first time.
This time I did wipe everything, which also resulted in the ROM zip file being deleted.
Managed to sideload it and everything is now working! Many thanks for the suggestion. And for future, should I be wiping everything, or is there a way to avoid the sideload?
Thanks
Click to expand...
Click to collapse
Like I said just reflash google apps no need for full wipe, use TWRP, keep a copy of GAPPS on your phone along with the rom so wiping won't be a problem should you need too.

dm verity boot error cb9 fixed..

I found simple fix.
just flash CB 7 firmware and modem throuth twrp.
https://www.androidfilehost.com/?fid=457095661767116249

First flash this file and then Rom. That's right?? Or its other way around

karan khara said:
First flash this file and then Rom. That's right?? Or its other way around
Click to expand...
Click to collapse
If u have dm verity error on boot. Just flash it..

Wouldn't this procedure downgrade some performance on the device?

Giocarro said:
Wouldn't this procedure downgrade some performance on the device?
Click to expand...
Click to collapse
No..

Can I flash CB 7 firmware and modem through USB-otg using twrp....I'm on CB9...my phone is encrypted

Nitesh13 said:
Can I flash CB 7 firmware and modem through USB-otg using twrp....I'm on CB9...my phone is encrypted
Click to expand...
Click to collapse
Yes u can..

Firmware is MM-based, can you flash this after you installed beta 9, because this is N-based?

cool.boy said:
I found simple fix.
just flash CB 7 firmware and modem throuth twrp.
https://www.androidfilehost.com/?fid=457095661767116249
Click to expand...
Click to collapse
Nice but what do you fix. If it is only a message that is displayed at boot but has no negative effects what is the point of fixing.
In my opinion using firmware and modem from mm for n can't be a good match or let's say better.

I have no DM verity error and I have cb9 firmware and rooted
Sent from my OnePlus 3 using XDA Labs

Why would you want to flash old firmware and modem, not made for this ROM, just to get rid of a pointless message?
Especially when there are other methods to fix this so called issue ...
Sent from my OnePlus 3 using Tapatalk

puschkin said:
Firmware is MM-based, can you flash this after you installed beta 9, because this is N-based?
Click to expand...
Click to collapse
Yes..

snippem said:
Nice but what do you fix. If it is only a message that is displayed at boot but has no negative effects what is the point of fixing.
In my opinion using firmware and modem from mm for n can't be a good match or let's say better.
Click to expand...
Click to collapse
Its a bug related cb9 firmware. U can use cb7 firmaware to fix it..

This makes sense. I was on open beta 8 for a few days
When I stumble across open beta 8 firmware + modem, I flashed it. Phone was working without issues prior to that, so I dont know what possessed me to do that because after that I began receiving dmverity message right after bootloader warning. I immediately knew it had to be the updated firmware/modem. Unfortunately I was unable to access twrp anymore. I ended up bricking my phone trying to revert this issue lol all is good now. I suggest you do not update to any firmware/moden newer than cb 7.

cool.boy said:
Its a bug related cb9 firmware. U can use cb7 firmaware to fix it..
Click to expand...
Click to collapse
it's not a bug…just another warning for modified partitions.
No need to be "fixed" and don't think using mm firmware to replace n's is a good choice

cool.boy said:
Its a bug related cb9 firmware. U can use cb7 firmaware to fix it..
Click to expand...
Click to collapse
cesar.mk4 said:
This makes sense. I was on open beta 8 for a few days
When I stumble across open beta 8 firmware + modem, I flashed it. Phone was working without issues prior to that, so I dont know what possessed me to do that because after that I began receiving dmverity message right after bootloader warning. I immediately knew it had to be the updated firmware/modem. Unfortunately I was unable to access twrp anymore. I ended up bricking my phone trying to revert this issue lol all is good now. I suggest you do not update to any firmware/moden newer than cb 7.
Click to expand...
Click to collapse
dlhxr said:
it's not a bug…just another warning for modified partitions.
No need to be "fixed" and don't think using mm firmware to replace n's is a good choice
Click to expand...
Click to collapse
Exactly I believe there is no point in flashing old firmware only if you can't wait for 5 sec.
If this was a bug oneplus would have pushed a patch out by now.

snippem said:
Exactly I believe there is no point in flashing old firmware only if you can't wait for 5 sec.
If this was a bug oneplus would have pushed a patch out by now.
Click to expand...
Click to collapse
I absolutely agree. 5 seconds more isnt a big deal. But why was I unable to access twrp?

cesar.mk4 said:
I absolutely agree. 5 seconds more isnt a big deal. But why was I unable to access twrp?
Click to expand...
Click to collapse
I never had that till now only after flash does not reboot.
In my opinion it is more a twrp incompatibility that will be resolved when N sources are out by oneplus

snippem said:
Exactly I believe there is no point in flashing old firmware only if you can't wait for 5 sec.
If this was a bug oneplus would have pushed a patch out by now.
Click to expand...
Click to collapse
Don't even need to wait, just press the power button to skip it (same applies to first bootloader unlocked message).
Sent from my OnePlus 3 using Tapatalk

it's easily avoidable (but the phone will be decrypted)
after flashing ob9 successfully and booting to system, reboot to TWRP (.28) and wipe convert data to f2fs then wipe it, then wipe internal storage (back up your data to your pc 1st)...and that's it, if you want root, reboot back to TWRP and flash root, then roboot to system, dmverity will be gone, and the phone decrypted,
(this will work if you started with a clean ob9 install like sideloading, and you ended with a full stock ob9)

[Guide] How to Flash Encrypted ROMs on a Decrypted Device (Without Losing Data)

Most custom ROMs for the OnePlus 5 are now supporting encrypted devices only. However, some users choose to keep their device in a decrypted state for MultiROM support and for other reasons. If you follow the steps below, you can flash any encrypted ROM on your decrypted device (without losing data) and your device will remain decrypted! I found this information in one of the many threads I've read (I don't remember which one) and thought I'd post it here to help others and for easy reference. Enjoy!
Follow These Steps:
1. Boot into TWRP
2. Wipe caches, data, and system partitions
3. Flash encrypted ROM
4. Flash GApps
5. Flash Magisk
6. Flash no-verity-op5.zip (not created by me)
7. Reboot
8. Enjoy!
If you closely follow the instructions above, you can enjoy any ROM on your decrypted OnePlus 5 and have the best of both worlds! :highfive:
Note 1: If device gets stuck at OnePlus boot animation after following all of the steps above, hold the power button for 10 seconds to turn off device. Power the device back on and it will boot successfully into the ROM.
Note 2: Some ROMs are not compatible with MultiROM without the inclusion of additional commits by ROM developer.

After wipes, its Flash ROM.. Flash optional Kernel.. Flash Gapps.. Flash No-verity.. Flash optional root (magisk or SuperSU).. Flash optional Viper4Arise?

Is this confirmed working? Has anyone actually tried the process and confirmed that any data on the phone's internal storage is there?

Ph0enix_216 said:
Is this confirmed working? Has anyone actually tried the process and confirmed that any data on the phone's internal storage is there?
Click to expand...
Click to collapse
Tested it yesterday with aosip and all data are on internal storage. Flashed validus today without no-verity-op5.zip and it worked too. Didn't lose data on internal storage...
Gesendet von meinem ONEPLUS A5000 mit Tapatalk

Ph0enix_216 said:
Is this confirmed working? Has anyone actually tried the process and confirmed that any data on the phone's internal storage is there?
Click to expand...
Click to collapse
Yes, I have followed these steps to flash MANY encrypted ROMs on my decrypted device.
Confirmed to work successfully! :good:

Creeper36 said:
After wipes, its Flash ROM.. Flash optional Kernel.. Flash Gapps.. Flash No-verity.. Flash optional root (magisk or SuperSU).. Flash optional Viper4Arise?
Click to expand...
Click to collapse
I've found that flashing SuperSU (instead of Magisk) on encrypted ROMs often ends in a bootloop on my decrypted device. Flashing Magisk seems to be a requirement.

Not working for me. Tried with AICP release from 9/11. Wiped caches, system, data. Flashed rom. flashed gapps (tried stock/full/micro). Flashed magisk (also tried without). -> Bootloop
//edit
sorry i think i misunderstood the post. i thought i can flash decrypted roms on encrypted device xD is that possible too?

nico2195x said:
sorry i think i misunderstood the post. i thought i can flash decrypted roms on encrypted device xD is that possible too?
Click to expand...
Click to collapse
No, I believe your device must be decrypted to flash decrypted ROMs.

Thanks for this! Do you know who we should thank for the zip? If there's an original thread for it?

DunamisMaximus said:
Thanks for this! Do you know who we should thank for the zip? If there's an original thread for it?
Click to expand...
Click to collapse
You are very welcome! Unfortunately, I do not know who originally created the verity zip. It has been passed around on XDA by many people.

DunamisMaximus said:
Thanks for this! Do you know who we should thank for the zip? If there's an original thread for it?
Click to expand...
Click to collapse
sjamie said:
You are very welcome! Unfortunately, I do not know who originally created the verity zip. It has been passed around on XDA by many people.
Click to expand...
Click to collapse
The original zip was modified for making FBE optional by @snowwolf725. Click here to visit his original thread.

I have a quick question. I just unlocked the Bootloader on my Plus 5 and installed TWRP 3.1.1-1 and Magisk 14.0 on it. The firmware is 4.5.0 as I didn't let it update at all and did all this to the device upon first bootup. I did not decrypt.
I've tried installing latest RR release (final for N cheeseburger) and the install stops with errors. I tried a different rom in the same Android version (7.1.2) and get same results. MD5 checks out on both downloads.
Do I have to flash the latest OnePlus 5 update (full OTA 4.5.10) before flashing a 7.1.2 rom? And should I decrypt my device for easier flashing?
If no one answers, I completely understand and will search some more but this seems to be a cloudy subject that gets many different answers and I thought I would post it here. Thank you all in advance.
Sent from my Nexus 6 using XDA Premium HD app

shadowstep said:
The original zip was modified for making FBE optional by @snowwolf725. Click here to visit his original thread.
Click to expand...
Click to collapse
And there's a thread I started for using FDE.
It works with most ROMs...
https://forum.xda-developers.com/oneplus-5/development/op5-disk-encryption-enabler-op5-t3672477

glockman4519 said:
I have a quick question. I just unlocked the Bootloader on my Plus 5 and installed TWRP 3.1.1-1 and Magisk 14.0 on it. The firmware is 4.5.0 as I didn't let it update at all and did all this to the device upon first bootup. I did not decrypt.
I've tried installing latest RR release (final for N cheeseburger) and the install stops with errors. I tried a different rom in the same Android version (7.1.2) and get same results. MD5 checks out on both downloads.
Do I have to flash the latest OnePlus 5 update (full OTA 4.5.10) before flashing a 7.1.2 rom? And should I decrypt my device for easier flashing?
If no one answers, I completely understand and will search some more but this seems to be a cloudy subject that gets many different answers and I thought I would post it here. Thank you all in advance.
Click to expand...
Click to collapse
Yes.. U need to flash the latest firmware and then flash roms.. There's a thread for firmware.. Flash the whole zip would again give you stock recovery and you have to re do the fastboot stuff so makes no sense..

arjunarora said:
Yes.. U need to flash the latest firmware and then flash roms.. There's a thread for firmware.. Flash the whole zip would again give you stock recovery and you have to re do the fastboot stuff so makes no sense..
Click to expand...
Click to collapse
In addition to what is stated here, if you flash Magisk immediately after flashing the full firmware zip (no rebooting between steps), TWRP won't get replaced with the stock recovery. This is a great time saver!

Any method to get oxygen os as a secondary ROM with multirom?

dakotah2468 said:
Any method to get oxygen os as a secondary ROM with multirom?
Click to expand...
Click to collapse
Yes, I've read that is possible. No, I don't know how to do it. :laugh:

sjamie said:
Yes, I've read that is possible. No, I don't know how to do it. :laugh:
Click to expand...
Click to collapse
Darn, well thanks for the reply

I just wanted to thank you for this thread. All of the information you provided helped me immensely. I was struggling with this device and flashing roms at first but one I unencrypted it, with your guide, everything worked great. I was going to leave it encrypted for easier flashing since most all the roms for this device are encrypted only. But I was having more issues than ever. And many, of the posts in here have also answered quite a few questions I had. This should be a pinned tread.
Anyways thank you again. Your thread is a must read for anyone with an Opo5.
"Chance Favors the Prepared"

dakotah2468 said:
Any method to get oxygen os as a secondary ROM with multirom?
Click to expand...
Click to collapse
Have you tried flashing OxygenOS, the no-verity zip and Magisk?
glockman4519 said:
I just wanted to thank you for this thread. All of the information you provided helped me immensely. I was struggling with this device and flashing roms at first but one I unencrypted it, with your guide, everything worked great. I was going to leave it encrypted for easier flashing since most all the roms for this device are encrypted only. But I was having more issues than ever. And many, of the posts in here have also answered quite a few questions I had. This should be a pinned tread.
Anyways thank you again. Your thread is a must read for anyone with an Opo5.
"Chance Favors the Prepared"
Click to expand...
Click to collapse
Thanks for the feedback and I'm glad this thread could provide you the guidance you needed.

Mod please delete thank u

deleted no more support

I cant wait to flash it.

@carbon271 Thank you so much for this! Any plans to make it TWRP flashable?

avbctdisable link seems broken...

LDP12 said:
avbctdisable link seems broken...
Click to expand...
Click to collapse
FIXED

TheKnux said:
@carbon271 Thank you so much for this! Any plans to make it TWRP flashable?
Click to expand...
Click to collapse
I didn't make the GSI was pulled from the treble side of development is an alternative until RR is supported for our devices

The rr gsi flashes fine in twrp, Fyi. Does this one have volte working? It works till u make a call then 3g or h.I flashed the build which seems to be the same from source forge from the gsi thread and volte doesnt work. Tmobile. General gsi info... U dont have to flash any of the other stuff. Whatever rom u run, wipe system, data, dalvik in twrp, flash gsi system.img, reboot.i have flashed it several times since its release this past fri/sat..
Flashing that first zip, what is it for?

Why flash to both slots? The whole point of A/B slotting is for redundancy fallback in case there's an issue with an update/rom. Also, TWRP supports flashing .img files without having to deal with fastboot (i.e., Install->Install Image).

fullofhell said:
The rr gsi flashes fine in twrp, Fyi. Does this one have volte working? It works till u make a call then 3g or h.I flashed the build which seems to be the same from source forge from the gsi thread and volte doesnt work. Tmobile. General gsi info... U dont have to flash any of the other stuff. Whatever rom u run, wipe system, data, dalvik in twrp, flash gsi system.img, reboot.i have flashed it several times since its release this past fri/sat..
Flashing that first zip, what is it for?
Click to expand...
Click to collapse
The Zip is to Disable Encryption since it cant be done thru fastboot is crucial to use it if not u will only have 8gb storage available meaning that u won't have any storage available.
Now First, off the one your talking about is an old build they reposted a whole new build yesterday second the GSI does not properly flash thru TWRP I cannot stress explaining this enough I have been testing GSI for 3-4days now and all I've done is write down and testing what works and doesn't is why I wrote the GSI Flashing guide Been Testing RR since this Morning and everything in my side works Volte, Wifi, Bluetooth,SMS all works camera also works if u don't follow the instructions I can't be of much help is Crucial to follow the steps as mentioned for the reason of everything to work properly.

Nsane457 said:
Why flash to both slots? The whole point of A/B slotting is for redundancy fallback in case there's an issue with an update/rom. Also, TWRP supports flashing .img files without having to deal with fastboot (i.e., Install->Install Image).
Click to expand...
Click to collapse
Is how I got everything to work properly if you guys want to try it as just slot a or b go for it but do know if you have issues I can't be of much help and twrp wasn't flashing gsi properly is why I used fastboot trust me I wouldn't go thru the hassle of saying it didn't work if it did

Will flash this tonight. I've been waiting for this rom, by far my favorite rom!

Yes!!!!! I was hoping we got this

Getting error 404 on downloads
Sent from my OnePlus6T using XDA Labs

fullofhell said:
The rr gsi flashes fine in twrp, Fyi. Does this one have volte working? It works till u make a call then 3g or h.I flashed the build which seems to be the same from source forge from the gsi thread and volte doesnt work. Tmobile. General gsi info... U dont have to flash any of the other stuff. Whatever rom u run, wipe system, data, dalvik in twrp, flash gsi system.img, reboot.i have flashed it several times since its release this past fri/sat..
Flashing that first zip, what is it for?
Click to expand...
Click to collapse
Do you ever stop giving bad flash instructions? This is the second time I've seen you do this now. Do you just want people to brick their devices or are you really that dumb? Don't even make a post if you're just going to guide people to a brick.

carbon271 said:
The Zip is to Disable Encryption since it cant be done thru fastboot is crucial to use it if not u will only have 8gb storage available meaning that u won't have any storage available.
Now First, off the one your talking about is an old build they reposted a whole new build yesterday second the GSI does not properly flash thru TWRP I cannot stress explaining this enough I have been testing GSI for 3-4days now and all I've done is write down and testing what works and doesn't is why I wrote the GSI Flashing guide Been Testing RR since this Morning and everything in my side works Volte, Wifi, Bluetooth,SMS all works camera also works if u don't follow the instructions I can't be of much help is Crucial to follow the steps as mentioned for the reason of everything to work properly.
Click to expand...
Click to collapse
Yeah i flashed the same build last night via twrp and used twrp to resize system partition to install gapps.f Lte works till u make a phone call. Tried with three kernels, redflare,.nebula, and stock kernel.thanks for linking this. I am building RR pie for fajita. Been working at it for a few days. My build derps at 90%, I now have some help and it will be ready to share soon, till then this gsi runs great, so long as u dont make a phone call.
Also, gsi's must be flashed to both slots on all devices

fullofhell said:
Yeah i flashed the same build last night via twrp and used twrp to resize system partition to install gapps.f Lte works till u make a phone call. Tried with three kernels, redflare,.nebula, and stock kernel.thanks for linking this. I am building RR pie for fajita. Been working at it for a few days. My build derps at 90%, I now have some help and it will be ready to share soon, till then this gsi runs great, so long as u dont make a phone call.
Also, gsi's must be flashed to both slots on all devices
Click to expand...
Click to collapse
So are you saying that you can't make phone calls?

sparky2029 said:
So are you saying that you can't make phone calls?
Click to expand...
Click to collapse
DO NOT LISTEN TO HIM FALSE INFORMATION
I've gone thru the hassle to write this guide for people that are likeminded and can't wait for an official build and wanted to see what is all about so i took the leap of testing GSI i have done everything I could to make sure that nobody has issues i am personally running this GSI and do not have any problems what so ever LTE works Volte Works wifi Bluetooth everything I am also running holy dragon kernel with magisk no issue no force closes everything seems pretty stable trust me I've sat here day after day working on this I wrote this instruction as specific as possible for the reasons to prevent any bricks from anyone please people if the instructions are nothing of what I posted do not follow can't stress this enough messing with GSI on a and b devices is a pain is why I said I had to wipe and boot my OEM Tmobile Rom before I did everything again just looking out for people don't want anybody to do my mistakes.

DoktorPlazarus said:
Getting error 404 on downloads
Sent from my OnePlus6T using XDA Labs
Click to expand...
Click to collapse
Links Updated

carbon271 said:
Updating Links Now
Click to expand...
Click to collapse
Awesome ! Thanks a ton
Sent from my OnePlus6T using XDA Labs

DoktorPlazarus said:
Awesome ! Thanks a ton
Sent from my OnePlus6T using XDA Labs
Click to expand...
Click to collapse
Links Updated good to go