I don't know what problem is this. Here is the link https://youtu.be/gvcj1V8XQwo I posters it in YouTube because it is quite hard to explain. I think no one has occur this problem. Any ideas how to fix it?
One plus 3 china a3000
Flash official twrp from one plus website
Successfully unlock bootloader
Install official op3 oxygen os
Successfully flash twrp official by one plus website
try flashing official recovery and sideload the full latest OOS.
angdaminaman said:
try flashing official recovery and sideload the full latest OOS.
Click to expand...
Click to collapse
What is OOS btw. What is OTA?? How do I flash the OOS? I had install twrp official by one plus website sorry I still a newbie. Btw I had tried using adb side load it also stuck halfway.
Abraham tan said:
What is OOS btw. What is OTA?? How do I flash the OOS? I had install twrp official by one plus website sorry I still a newbie. Btw I had tried using adb side load it also stuck halfway.
Click to expand...
Click to collapse
oxygen os for OOS, then over the air update for ota.. twrp official by oneplus ?? oneplus would not provide twrp.. they will only provide their own stock recovery..
edit:
my bad. they supplied twrp on their website. lol.
reyscott said:
oxygen os for OOS, then over the air update for ota.. twrp official by oneplus ?? oneplus would not provide twrp.. they will only provide their own stock recovery..
edit:
my bad. they supplied twrp on their website. lol.
Click to expand...
Click to collapse
Idk what u mean. I still a newbie. Can I give me more detail on how? I had tried install oxygen os official by one plus it is still the same problem.
http://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
Sent from my ONEPLUS A3000
fiepi said:
http://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
Sent from my ONEPLUS A3000
Click to expand...
Click to collapse
So this assume that my one plus 3 hardware problem or hard brick ?
Abraham tan said:
So this assume that my one plus 3 hardware problem or hard brick ?
Click to expand...
Click to collapse
i just restored mine using twrp and it worked for me.. try to check with oneplus customer support
reflash the original oneplus recovery, not twrp, thru fastboot.
download the full oxygen os in your pc. the sideload it thru your pc via original oxygen recovery.
angdaminaman said:
reflash the original oneplus recovery, not twrp, thru fastboot.
download the full oxygen os in your pc. the sideload it thru your pc via original oxygen recovery.
Click to expand...
Click to collapse
what i did on mine was to flash official 3.2.6 and never thought that it would work. but it did.. and then after booting up, i flash the stock oneplus recovery on twrp then updated my phone with the 3.2.7 ota..
reyscott said:
what i did on mine was to flash official 3.2.6 and never thought that it would work. but it did.. and then after booting up, i flash the stock oneplus recovery on twrp then updated my phone with the 3.2.7 ota..
Click to expand...
Click to collapse
thats good sir.
i have china version op3 as well. what i did to flash OOS is just sideload thru stock recovery. i didnt even need to unlock bootloader. since they are both official OS.
so that might work for the original poster. just use stock recovery and adb sideload OOS
angdaminaman said:
thats good sir.
i have china version op3 as well. what i did to flash OOS is just sideload thru stock recovery. i didnt even need to unlock bootloader. since they are both official OS.
so that might work for the original poster. just use stock recovery and adb sideload OOS
Click to expand...
Click to collapse
Btw what is OOS how do I flash it?
Abraham tan said:
Btw what is OOS how do I flash it?
Click to expand...
Click to collapse
OOS is OxygenOS.......
Abraham tan said:
Btw what is OOS how do I flash it?
Click to expand...
Click to collapse
aassuming you know all the basics and you have computers around you, especially windows os.
1. download everything (latest full oxygen os zip found in downloads.oneplus.net, original oxygen recovery also found in that link)
2. boot to fastboot
3. flash original recovery (i believe you know how to flash, you have twrp in your oneplus 3, this should not be a problem to you)
4. reboot to recovery
5. choose adb sideload
6. adb sideload the latest oxygen os zip
you should really just follow step by step the instruction found in the downloads.oneplus.net, assuming you now have the original recovery, not the twrp.
tell me if you still can not follow. ill make a spoonfeed tutorial when i get home using pc. its really hard to write a step by step tutorial using phone.
@abraham I noticed you didn't wipe dalvik cache before installing the OOS. Try wiping dalvik cache, cache, data and system to see if that could solve the problem.
Sent from my ONEPLUS A3003 using Tapatalk
angdaminaman said:
aassuming you know all the basics and you have computers around you, especially windows os.
1. download everything (latest full oxygen os zip found in downloads.oneplus.net, original oxygen recovery also found in that link)
2. boot to fastboot
3. flash original recovery (i believe you know how to flash, you have twrp in your oneplus 3, this should not be a problem to you)
4. reboot to recovery
5. choose adb sideload
6. adb sideload the latest oxygen os zip
you should really just follow step by step the instruction found in the downloads.oneplus.net, assuming you now have the original recovery, not the twrp.
tell me if you still can not follow. ill make a spoonfeed tutorial when i get home using pc. its really hard to write a step by step tutorial using phone.
Click to expand...
Click to collapse
Tried every possible method. I use twrp official flash zip or adb side load also cannot. I tried using stock recovery also cannot. I tried using the hard brick way last night but after the flash, the phone is charging and I know it is OOS charging thing. Like you power off your phone and let it charge it wok come out a battery logo and charge your phone. I got that so I assume that I have OOS install. But when I power it on it also stuck at booting the phone. So tired right now being finding solution for about 2 weeks. Could it be the hardware problem that effect the phone?
Butit said:
@abraham I noticed you didn't wipe dalvik cache before installing the OOS. Try wiping dalvik cache, cache, data and system to see if that could solve the problem.
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
Thanks for the advise. Tried but no luck. Still the same problem. What seems to be the problem? Hardware? Or could it be a fake op3 that I bought from china?
Abraham tan said:
Thanks for the advise. Tried but no luck. Still the same problem. What seems to be the problem? Hardware? Or could it be a fake op3 that I bought from china?
Click to expand...
Click to collapse
if you were able to flash op3 twrp, then its not fake. the twrp you downloaded is designed for op3, right? if you have successfully flashed it, then its an authentic op3.
just return/exchange it if possible.
i have changed my Hydrogen OS to Oxygen OS smoothly. I didnt even need to unlock bootloader nor change recoveries.
angdaminaman said:
if you were able to flash op3 twrp, then its not fake. the twrp you downloaded is designed for op3, right? if you have successfully flashed it, then its an authentic op3.
just return/exchange it if possible.
i have changed my Hydrogen OS to Oxygen OS smoothly. I didnt even need to unlock bootloader nor change recoveries.
Click to expand...
Click to collapse
Hmm what's seems to be the problem. I live in Malaysia and I bought the op3 from china so it is kinda hard to return. Maybe I bring to service centre for repair.
Abraham tan said:
What is OOS btw. What is OTA?? How do I flash the OOS? I had install twrp official by one plus website sorry I still a newbie. Btw I had tried using adb side load it also stuck halfway.
Click to expand...
Click to collapse
You have to wait when it stuck half way, it takes some time there and continue usually, this is what i seen?
Related
Removed
Which TWRP did you try flashing? Official or modified one?
Try with modified 3.0.2-22, if you haven't yet.
Sent from my OnePlus 3 using Tapatalk
Thanks for the reply.
Flashed modified 3.0.2-22 before flashing new CE build.
Post corrupting recovery partition, tried flashing back the same recovery...resulting in blackscreen tho.
Explorer23 said:
Which TWRP did you try flashing? Official or modified one?
Try with modified 3.0.2-22, if you haven't yet.
Sent from my OnePlus 3 using Tapatalk
Click to expand...
Click to collapse
Did you try mega unbrick guide?
Sent from my ONEPLUS A3000 using Tapatalk
yes, tried with MSMDownloadTool from that post, since the device isn't in Qualcomm diagnostic mode, that didn't help much.
Explorer23 said:
Which TWRP did you try flashing? Official or modified one?
Try with modified 3.0.2-22, if you haven't yet.
Sent from my OnePlus 3 using Tapatalk
Click to expand...
Click to collapse
tdamocles said:
Did you try mega unbrick guide?
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
I'm facing almost same situation, haven't flashed wrong twrp, have tried 3.0.2.22 and screwed up...not able to flash any other twrp. Have side loaded OOS 3.5.5 and rebooted to get official recovery and succeeded as well but as soon as have flashed official twrp resulting black screen. Again flashed 3.0.2.22 through fastboot mode and working... In short, I can't use any recovery other then 3.0.2.22. Any guidance and help would be highly appreciated....
Sent from Tapatalk
I also use .22 recovery and no problem. The problem is not the recovery, its a noob problem.
indeed that seems to be the problem here.
Tried flashing modified recovery again (-22), successfully booted into recovery now.
What's causing this issue, any pointers guys ?
can't go back to official twrp for some reason.
deeplyyoung said:
I'm facing almost same situation, haven't flashed wrong twrp, have tried 3.0.2.22 and screwed up...not able to flash any other twrp. Have side loaded OOS 3.5.5 and rebooted to get official recovery and succeeded as well but as soon as have flashed official twrp resulting black screen. Again flashed 3.0.2.22 through fastboot mode and working... In short, I can't use any recovery other then 3.0.2.22. Any guidance and help would be highly appreciated....
Sent from Tapatalk
Click to expand...
Click to collapse
Well technically we should be able to get back to official recovery.
Care to explain the "noob" problem mate ?
Schrotty35 said:
I also use .22 recovery and no problem. The problem is not the recovery, its a noob problem.
Click to expand...
Click to collapse
Schrotty35 said:
I also use .22 recovery and no problem. The problem is not the recovery, its a noob problem.
Click to expand...
Click to collapse
Well accepted its noob problem, appreciating if you help us, instead of pointing noob @#$%.
Want to use multiROM but not able to flash any other recovery.
Any other way to hard reset the device which fixed recovery partitions (I'm sure we messed with partitions).
Edit: even I'm using 3.0.2.22 without any issues but if I want to use any other recovery(official twrp or multiROM twrp, not able to boot into it, truly noob thing as per your post)
Official TWRP is not compatible with CE ROMs. Try first flashing official OOS (3.2.7 or older) with -22 and then flashing official TWRP.
Sent from my OnePlus 3 using Tapatalk
deeplyyoung said:
I'm facing almost same situation, haven't flashed wrong twrp, have tried 3.0.2.22 and screwed up...not able to flash any other twrp. Have side loaded OOS 3.5.5 and rebooted to get official recovery and succeeded as well but as soon as have flashed official twrp resulting black screen. Again flashed 3.0.2.22 through fastboot mode and working... In short, I can't use any recovery other then 3.0.2.22. Any guidance and help would be highly appreciated....
Sent from Tapatalk
Click to expand...
Click to collapse
I'm trying to get stock recovery I have modified twrp but whenever I flash the cb full zip twrp doesn't get overwritten
To Reproduce the issue.
1. Flash modified TWRP (-22) version via fastboot
2. Flash CE ROM latest 3.5.5 from recovery
3. Reboot into system, successfully booted.
4. Tried flashing official TWRP, results in Blackscreen (in my case flashed incorrect TWRP, then flashed official one)
5. flashing back (-22) version of TWRP, recovery seems working...however if one wants to switch to official or MultiRom's TWRP, results in Blackscreen.
Hope this gives detailed understanding
Edit:
Gonna try the same with 3.2.7 OOS. Thanks Mate
Explorer23 said:
Official TWRP is not compatible with CE ROMs. Try first flashing official OOS (3.2.7 or older) with -22 and then flashing official TWRP.
Sent from my OnePlus 3 using Tapatalk
Click to expand...
Click to collapse
Explorer23 said:
Official TWRP is not compatible with CE ROMs. Try first flashing official OOS (3.2.7 or older) with -22 and then flashing official TWRP.
Sent from my OnePlus 3 using Tapatalk
Click to expand...
Click to collapse
thanks Buddy, appreciated your help, gonna try this ASAP & will revert with results.
not able to get full zip of 3.2.7, trying with 3.2.6
Yeah, flashing full stock oos might do the trick, there's something related to firmware, it's a long story to understand and I'm not fully getting it, anyway, flash the full stock, boot it up, your device may get encrypted again and then flash the official twrp via fastboot, don't use flashify
I'll try to keep an eye out here rather than on the multi-boot thread
Sent from my Darkside of Oneplus 3
power off phone, keep pressed vol-up+vol-down and connect usb cable, phone will enter qualcomm download mode, then flash with MSM Download Tool.
Explorer23 said:
Official TWRP is not compatible with CE ROMs. Try first flashing official OOS (3.2.7 or older) with -22 and then flashing official TWRP.
Sent from my OnePlus 3 using Tapatalk
Click to expand...
Click to collapse
xanthrax said:
Yeah, flashing full stock oos might do the trick, there's something related to firmware, it's a long story to understand and I'm not fully getting it, anyway, flash the full stock, boot it up, your device may get encrypted again and then flash the official twrp via fastboot, don't use flashify
I'll try to keep an eye out here rather than on the multi-boot thread
Sent from my Darkside of Oneplus 3
Click to expand...
Click to collapse
Yesssss!! Trick worked, have flashed FULL zip OnePlus3Oxygen_16_OTA_015_all_1609141252_c38077177cfc4e74 over OnePlus3Oxygen_16_OTA_007_all_1610310039_bc5bc09fd9af4ceb with stock recovery, device encrypted again but no issues, then fastboot official TWRP worked & then fastboot MRTWRP worked....
now my Question:- pls help, enable us to get some knowledge
I want to use MultiROM, so decryption procedure will do.
1} if i again flash OnePlus 3 OxygenOS 3.5.5 Community Build as primary using MultiROM twrp, is it gonna work?
2} I want to use DU(MM), PAC-MAN(MM), exodus, MIUI, aicp (7.1) or HydrogenOS H2OS whats the best possibilities & way.
3} which one can be use as primary
4} can i flash FreedomOS CE 1.10 [OOS 3.5.5 CB] using multiROM twrp as primary?
5} can I swap FreedomOS CE 1.10 [OOS 3.5.5 CB] as secondary & flash HydrogenOS H2OS as primary?
Hello lovely XDA-members,
this morning a new OTA update/patch came out for my OnePlus 3T, so I downloaded and tryed to install it right away. My phone is rooted on android 7.0 and I have TWRP 3.0.3-0 installed as my recovery. Normally (when I updated to nougat) after downloading a new update the phone reboots itself into TWRP and installs the update by itself, but not this time. I had to seqrch through my phone and had to install thw update manually. After that I rebooted the phone and it started booting the TWRP recovery again, I tried it again and again and again, nothint changed. So I tried to restore my backup with everything functioning, but this wouldnt help either. :/ I read the few existing threads with this problem and heard of a recovery flag that isnt cleared and the bootloader being the problem. One solution that I found was only for an LG phone and I'm afraid that I'll brick my brand new phone I have absolutely no idea what to do now, I would be so happy if someone could help me with this :$
I thank you in advance <3
Encoutered the same problem. Either you reflash the official or twrp recovery (neither did the trick to me) or use this "emergency tool" (which helped me):
https://forums.oneplus.net/threads/unbrick-guide-oneplus-3t.481214/
Btw: TWRP 3.0.3-0 is not working well, switch to 3.0.3-1 beta
Good luck to you
I had the same problem.
How you can ''unbrick it'':
1. Flash a any rom available for the oneplus 3t via twrp
a. after this you will be still in twrp bootloop, to solve this go to step 2
2. Flash back stock recovery via twrp
Now your system will boot again
Optional: Flash back twrp
Just flash stock recovery via adb and you're done. It will fix the problem, you won't lose any data
Isus <3 said:
Just flash stock recovery via adb and you're done. It will fix the problem, you won't lose any data
Click to expand...
Click to collapse
@Isus <3 and @koentdm Do you have a download for the stock recovery, cause the oneplus download-site isnt working and I cant find any other downloads for it
EYT said:
@Isus <3 and @koentdm Do you have a download for the stock recovery, cause the oneplus download-site isnt working and I cant find any other downloads for it
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B0pr-ZA5b-1pNVlxV3ljMUFaUHc/view
Thank you so much, it worked
EYT said:
Thank you so much, it worked
Click to expand...
Click to collapse
No problemos my friendos
My OnePlus 3T is freezing. I've tried wiping it, fastboot erasing/formatting and custom ROMs/stock. Is my unit defective? I've had it since release with a glass screen protector and tudia case. What will happen if I ask for a replacement? How quickly will they replace it or repair it?
Thanks!
woundman said:
My OnePlus 3T is freezing. I've tried wiping it, fastboot erasing/formatting and custom ROMs/stock. Is my unit defective? I've had it since release with a glass screen protector and tudia case. What will happen if I ask for a replacement? How quickly will they replace it or repair it?
Thanks!
Click to expand...
Click to collapse
Try sideload of stock rom with stock recovery.
Sent from my Funk Tuned 3T
Funk Wizard said:
Try sideload of stock rom with stock recovery.
Sent from my Funk Tuned 3T
Click to expand...
Click to collapse
Will try now. Just clean flashed stock ROM and phone won't boot now.
Edit: Can't seem to get ADB to function. Only fastboot works. Does it matter?
woundman said:
Will try now. Just clean flashed stock ROM and phone won't boot now.
Edit: Can't seem to get ADB to function. Only fastboot works. Does it matter?
Click to expand...
Click to collapse
Check the ADB drivers, ABD has to work in order to sideload.
Funk Wizard said:
Check the ADB drivers, ABD has to work in order to sideload.
Click to expand...
Click to collapse
Sorry, I'm pretty tired. Sideloading fails with stock recovery for some reason. Error is: "Installation Failed".
Edit: Figured it out. Rebooted PC and phone, then it worked. Time to see if it still crashes.
Funk Wizard said:
Check the ADB drivers, ABD has to work in order to sideload.
Click to expand...
Click to collapse
I successfully sideloaded the stock ROM / recovery, but the phone won't fully boot. The phone goes black or shuts down after it's about to start the initial setup phase. Is there anything else I should try? I've contacted support and they want to remote flash the device on the 24th...
I would recommend you to follow the unbrick guide which restores your phone to factory state, and then try again to update to 4.1.3.
https://forum.xda-developers.com/showthread.php?t=3515306
woundman said:
I successfully sideloaded the stock ROM / recovery, but the phone won't fully boot. The phone goes black or shuts down after it's about to start the initial setup phase. Is there anything else I should try? I've contacted support and they want to remote flash the device on the 24th...
Click to expand...
Click to collapse
Try the unbrick guide as said above
Sent from my Funk Tuned 3T
pitrus- said:
I would recommend you to follow the unbrick guide which restores your phone to factory state, and then try again to update to 4.1.3.
https://forum.xda-developers.com/showthread.php?t=3515306
Click to expand...
Click to collapse
Funk Wizard said:
Try the unbrick guide as said above
Sent from my Funk Tuned 3T
Click to expand...
Click to collapse
So I followed the unbrick tool and everything worked great flashing back to 3.5.4. However, once I sideloaded to 4.1.3, the phone freezes nonstop. I had to manually restart the phone just to get to the initalize setup screen, but now the phone is completely frozen. Why is 3.5.4 working fine, but 4.1.3 crashing? Is my 4.1.3 corrupt or something? I'm really confused.
I left OOS around 4.0.1 and has been using LOS 14.1 instead, but from what I've heard from those still using OOS, 4.1.3 of it should work just fine.
pitrus- said:
I left OOS around 4.0.1 and has been using LOS 14.1 instead, but from what I've heard from those still using OOS, 4.1.3 of it should work just fine.
Click to expand...
Click to collapse
So, you think the phone is defective? I'm really confused why 3.5.4 worked fine, but flashing stock 4.1.3 causes the phone to crash.
woundman said:
So, you think the phone is defective? I'm really confused why 3.5.4 worked fine, but flashing stock 4.1.3 causes the phone to crash.
Click to expand...
Click to collapse
Just unbricked the device again and sideloaded the latest OxygenOS update. Phone froze while typing in wifi password during setup. Think it's safe to say it's defective? I've tried everything.
woundman said:
So I followed the unbrick tool and everything worked great flashing back to 3.5.4. However, once I sideloaded to 4.1.3, the phone freezes nonstop. I had to manually restart the phone just to get to the initalize setup screen, but now the phone is completely frozen. Why is 3.5.4 working fine, but 4.1.3 crashing? Is my 4.1.3 corrupt or something? I'm really confused.
Click to expand...
Click to collapse
May be a bad download, you don't have to sideload.
Just flash the new recovery and install via internal from stock recovery or you can also ways flash full zip via twrp
Sent from my OnePlus 3T using XDA Labs
Funk Wizard said:
May be a bad download, you don't have to sideload.
Just flash the new recovery and install via internal from stock recovery or you can also ways flash full zip via twrp
Sent from my OnePlus 3T using XDA Labs
Click to expand...
Click to collapse
I've tried downloading the file multiple times, still freezes every time for some reason. I'll try installing from internal and see if that helps. After that, I think I'm gonna give up.
woundman said:
I've tried downloading the file multiple times, still freezes every time for some reason. I'll try installing from internal and see if that helps. After that, I think I'm gonna give up.
Click to expand...
Click to collapse
Install from internal and install Beta its much better
Sent from Funk Tuned 3T
woundman said:
I've tried downloading the file multiple times, still freezes every time for some reason. I'll try installing from internal and see if that helps. After that, I think I'm gonna give up.
Click to expand...
Click to collapse
did you try installing 3.5.4 then using the OTA updates to update to the latest version?
nhshah7 said:
did you try installing 3.5.4 then using the OTA updates to update to the latest version?
Click to expand...
Click to collapse
Just reran the unbricking tool and now it's freezing on 3.5.4. Phone is defective, returning it.
Hi, I am new to this forum but old on android. My oneplus 3t brick yesterday and i don't know why. I never rooted phone and always update phone via OTA. I contacted Oneplus support yesterday and they arrange a remote session where they are unable to install anything via msmdownload tool. I download msmdownload tool yesterday from this forum and my phone works but there is no modem in it. I am unable to connect to wifi and SIM internet. Oxygen OS version install at the moment is 3.5.1 and android version is 6.0.1. Need help from some seniors.
Update by using on the of the official "full zips"? These include the modem, so I would think that would fix the problem, unless there is a more serious issue (hardware failure, etc.):
https://forum.xda-developers.com/oneplus-3t/how-to/rom-oxygenos-3-5-4-mm-ota-update-t3519074
redpoint73 said:
Update by using on the of the official "full zips"? These include the modem, so I would think that would fix the problem, unless there is a more serious issue (hardware failure, etc.):
https://forum.xda-developers.com/oneplus-3t/how-to/rom-oxygenos-3-5-4-mm-ota-update-t3519074
Click to expand...
Click to collapse
I tried multiple time but device stuck in boot loop. Downloaded ROM from Oneplus official site.
xusmanmalik said:
I tried multiple time but device stuck in boot loop. Downloaded ROM from Oneplus official site.
Click to expand...
Click to collapse
The full zip or the OTA?
Is your phone rooted/TWRP installed, or is it stock?
redpoint73 said:
The full zip or the OTA?
Is your phone rooted/TWRP installed, or is it stock?
Click to expand...
Click to collapse
Phone is stock not rooted. When i upgrade locally or through adb process phone stuck in bootloop.
xusmanmalik said:
Phone is stock not rooted. When i upgrade locally or through adb process phone stuck in bootloop.
Click to expand...
Click to collapse
Now i updated from 3.5.1 to 3.5.4 but issue still exist
xusmanmalik said:
Now i updated from 3.5.1 to 3.5.4 but issue still exist
Click to expand...
Click to collapse
Upgrading from 3.5.4 to 4.0.2 phone again stuck at boot screen. I don't know what to do know. Should i go for warranty claim or try something else. Need HELP!!!!
Thanks in Advance.
Are you able to go to fastboot mode? If yes, go for it:
https://forums.oneplus.net/threads/...wrp-root-nandroid-efs-backup-and-more.475142/
Install TWRP too. Now you're able to wipe everything and upload a full ROM to your device (Thanks to MTP-mode via TWRP, so handy!). Flash the full ROM and have a try .
MickyFoley said:
Are you able to go to fastboot mode? If yes, go for it:
https://forums.oneplus.net/threads/...wrp-root-nandroid-efs-backup-and-more.475142/
Install TWRP too. Now you're able to wipe everything and upload a full ROM to your device (Thanks to MTP-mode via TWRP, so handy!). Flash the full ROM and have a try .
Click to expand...
Click to collapse
Micky Thanks for the help. I will give a try and will inform further.
I ****ed up somewhere. Encryption unsuccessful Error.
xusmanmalik said:
I ****ed up somewhere. Encryption unsuccessful Error.
Click to expand...
Click to collapse
Do you have TWRP installed? Just wipe your phone, get an otg cable and a flash drive, you can flash everything from the flash drive
I revert back trying again now.
xusmanmalik said:
Micky Thanks for the help. I will give a try and will inform further.
Click to expand...
Click to collapse
Hi Micky Foley, I successfully followed all steps and now i am on twrp and su installed.
But still i am unable to install other ROM than 3.5.*
Your last option is the warranty then mate
Hey everyone
I recently got this phone and went through the bootloader unlock process.
I then tried to follow the instructions on this page https://wiki.pixelexperience.org/devices/rosemary/install/ to get this rom installed but somehow ****ed it up.
Everything went well until I tried to flash the recovery img from this page: https://get.pixelexperience.org/rosemary (i downloaded the 13 plus recovery img).
I flashed the img via fastboot but after that I got stuck in fastboot. The phone is stuck in a bootloop when I try to reboot into recovery or normal boot. The only thing I can get back into is fastboot.
Would really appreciate any help to get the phone working again. Im not new to android custom roms but Im new to xiaomi phones and Im a little lost
Thanks.
OK nevermind I successfully got the phone booting again with miflash tool by reflashing an official firmware...
Greetings!
You can install the rom via adb sideload too. Put on some random recovery (see my tutorial here: https://forum.xda-developers.com/t/twrp-on-android-12.4522273/), and start adb sideload.
Then,
adb sideload insert_package_name.zip
Click to expand...
Click to collapse
Hope it helps! ; D
dona3000 said:
Hey everyone
I recently got this phone and went through the bootloader unlock process.
I then tried to follow the instructions on this page https://wiki.pixelexperience.org/devices/ros mary/install/ to get this rom installed but somehow ****ed it up.
Everything went well until I tried to flash the recovery img from this page: https://get.pixelexperience.org/rosemary (i downloaded the 13 plus recovery img).
I flashed the img via fastboot but after that I got stuck in fastboot. The phone is stuck in a bootloop when I try to reboot into recovery or normal boot. The only thing I can get back into is fastboot.
Would really appreciate any help to get the phone working again. Im not new to android custom roms but Im new to xiaomi phones and Im a little lost
Thanks.
Click to expand...
Click to collapse
Did u make sure ur on Miui 12.5.16.0.RKLMIXM?
I'm also having similar problem and circumstance, may I ask where did you find the official firmware and/or recovery img for the Redmi note 10s
fol!s said:
I'm also having similar problem and circumstance, may I ask where did you find the official firmware and/or recovery img for the Redmi note 10s
Click to expand...
Click to collapse
Greetings!
As this phone has an MTK processor, we don't really have a recovery image, it's stored in the boot img I suppose. That link, you can download the official rom to this. DISCLAIMER: There are two types of ROMs listed here, one type is fastboot, that you need now in order to flash it through a computer for example. The another type is the recovery rom, that you can flash from recovery like a magisk package, or anything flashable zip, or with adb sideload.
https://mifirm.net
You should choose global if you are in Europe, but it's suitable for devices in the US or USA probably, ony feature differences are here between an EEA and Global rom.
Also, if you install pixel experience recovery, you can install the firmware by going into recovery, and do it via sideload. Or, you can try flashing the rom with TWRP (tutorial linked below), but then you won't able to install updates automatically.
One question: Did you checked in OEM unlocking in developer options before flashed PE?
Hope it helps!
Yeah, I did checked the oem unlocking. I think the reason why i failed because my bootloader probably updated and I forgot to check. You need bootloader version 12.5.16.0.RKLMIXM to install the pixel experience. Also thank for help
Greetings!
You can install the rom via adb sideload too. Put on some random recovery (see my tutorial here: https://forum.xda-developers.com/members/gurtnyi.11842195), and start adb sideload.
Then,
adb sideload insert_package_name.zip
Hope it helps! ; D
Click to expand...
Click to collapse
Can I do that on newer firmware or should I roll back to version 12.5.16.0.RKLMIXM? And if I roll back then I need to unlock device again?
I think you can. I've flashed it successfully on the latest version too. Currently I don't use PE but it was good for me.
Well, regarding to the unlock, it's not a big deal, you don't have to wait 168h again, once you've firstly unlocked your device, you can re-unlock it again, and again, no matter how many times, you don't have to wait a lot again.
But depending on how you rollback it,
I mean, with xiaomi flasher (i think that's its name) you can choose between clean all and lock, save userdata, and clean all, but in the first case, it'll lock back the bootloader. With SP flash tool (if you need, I can provide a link for the modified version of it, that doesn't require an auth file, but if fails, you need a python script, I can link that too), as I remember it won't lock back the device, but I'm not a 100% sure
Hope it helps!
Can you repair link to totorial https://forum.xda-developers.com/members/gurtnyi.11842195 doesn't seem to work.
raven17a said:
Can you repair link to totorial https://forum.xda-developers.com/members/gurtnyi.11842195 doesn't seem to work.
Click to expand...
Click to collapse
Corrected, thank you!
Thank you! I managed to install PE by rolling back to MIUI 12.5. Sideload unfortunatly not working on stock recovery.
raven17a said:
Thank you! I managed to install PE by rolling back to MIUI 12.5. Sideload unfortunatly not working on stock recovery.
Click to expand...
Click to collapse
Happy to hear that!
By the way, yes, pe recovery is better for sideloading, or eventually any not stock recovery. Also, if you install PE recovery, you can apply updates automatically, and in the future you won't need to flash it manually.