Debranding - not so easy.. - Huawei P9 Plus Questions & Answers

*********************** WARNING***********************
Somebody tried the procedure I wrote before without success! Please do not do it until everything gets clarified. It may be necessary to unlock the boot loader before (SRTK tool). To unlock the bootloader it is necessary to get the needed code from huawei at this link.
**********************************************************
Hello All,
after having spent over one full day trying to debrand my Huawei P9 Plus (without success..) I have finally found a way to do that which is really easy (and successful!).
BTW. THis is something you can do at your own risk! Consider that FW Upgrade may anyway be dangerous and will ERASE ALL YOUR DATA! Don't blame me if something goes wrong..
PHASE 1 - unlocking the boot loader
0. Install Android SDK (Android studio is ok) and make sure on command line you can execute "fastboot" command and "adb" command; In alternative you can use install ADB, fastboot and drivers in 15 seconds as described in this thread.
1. get the serial number. On the phone keyboard digit *#*#2846579#*#* then select 2. Veneer Informations and then 3. Other Info. Take note of the serial number. You will need also your phone IMEI code (you can get it from phone settings->phone status);
2. Go to this link and get the bootloader unlock code.
3. Now to start the phone in boot mode you need to:
a. shutdown the phone
b. press simultaneously volume- and power button until you get to the boot loader page
c. open a cmd shell and write down the command: fastboot oem unlock <put-here-your-unlock-code>. If the code is right the bootloader will be unlocked and the phone will factory reset and reboot.
PHASE 2
1. Download from http://www.huaweifirm.com/firmware/p9-plus-vie-l09/ the firmware you need (C432 is the European unbranded version I downloaded) I downloaded exactly the VIE-L09_C432B161a_Firmware_CEE&Nordic European_Channel-Others_Android 6.0_EMUI 4.1_05013RNS
2. format a micro SD card (not really needed but I did it..)
3. unzip the dload folder from zip to the SD card. Verify that the dload folder contains one file (UPDATE.APP) and two folders (dt and hw).
4. shutdown the phone
5. insert the SD card (with dload)
6. press volume+ volume- and power button simultaneously and keep it pressed until you don't see that the upgrade is started.
7. wait till the end..
That's all.. After this my phone got the upgrade from OTA.. and I am happy
Hope this may save some time for other people wanting to debrand their P9 plus.

Jesus!!! How can be that simple to unbrand the phone??There´s a thread in the forum for this purpose, and there are fellows that bricked their phone. Which brand you were on?

ehduarte said:
Jesus!!! How can be that simple to unbrand the phone??There´s a thread in the forum for this purpose, and there are fellows that bricked their phone. Which brand you were on?
Click to expand...
Click to collapse
To unbrand the phone is quite easy but the most difficult is to get it to a OTA enabled version.. when you upgrade it to an unbranded version using just the UPDATE.APP as in most thread described.. you end by getting a C900 version which is does not support OTA upgrades.
I had C555 (H3G Ita). Now is C432. What was difficult was to find the right dload to put on the micro SD... all other zip files (update.zip) on most threads where missing the parts needed to really set the device to C432.

antonio2009 said:
To unbrand the phone is quite easy but the most difficult is to get it to a OTA enabled version.. when you upgrade it to an unbranded version using just the UPDATE.APP as in most thread described.. you end by getting a C900 version which is does not support OTA upgrades.
I had C555 (H3G Ita). Now is C432. What was difficult was to find the right dload to put on the micro SD... all other zip files (update.zip) on most threads where missing the parts needed to really set the device to C432.
Click to expand...
Click to collapse
I have the vodafone Portugal. Downloading the unbranded version on the wesite you posted and following your method i won´t brick my phone? And i will have OTA enabled?
---------- Post added at 01:09 PM ---------- Previous post was at 01:07 PM ----------
ehduarte said:
I have the vodafone Portugal. Downloading the unbranded version on the wesite you posted and following your method i won�t brick my phone? And i will have OTA enabled?
Click to expand...
Click to collapse
By doing this will i loose warranty? Or will my hicare premium warranty will be revogued?

Hello, your method did not work on my P9 +
I tested 2 times (with an unformatted and formatted SD card). Same result, I'm still in C900B170.

antonio2009 said:
To unbrand the phone is quite easy but the most difficult is to get it to a OTA enabled version.. when you upgrade it to an unbranded version using just the UPDATE.APP as in most thread described.. you end by getting a C900 version which is does not support OTA upgrades.
I had C555 (H3G Ita). Now is C432. What was difficult was to find the right dload to put on the micro SD... all other zip files (update.zip) on most threads where missing the parts needed to really set the device to C432.
Click to expand...
Click to collapse
There is 5 different C432 firmwares, wich did u use of them?
Sent from my VIE-L29 using XDA Labs

I did exactly what you said and my became with the version c900B170 (

I used exactly this:
VIE-L09_C432B161a_Firmware_CEE&Nordic European_Channel-Others_Android 6.0_EMUI 4.1_05013RNS
I am wondering if the bootloader was unlocked when I started the procedure I described.. In case that would be the missing step I omitted. I got the unlock code on huawei website. Then I used SRTK tool to unlock the boot loader. I am sorry if this is the case... but anyway without the right rom it didn't work.
Guys I have modified my initial post to avoid other people to set their phone to C900...
Please try the new (more complex) procedure I described.

If install the original rom i had, will all be back to normal?? Because now i dont have the themes market only the local ones!!
I wished that i´ve never done this

​
ehduarte said:
If install the original rom i had, will all be back to normal?? Because now i dont have the themes market only the local ones!!
I wished that i´ve never done this
Click to expand...
Click to collapse
I am sorry, I have the themes market so even if you go till the end with the C432 you will get it. Did you check the updated procedure in the starting post? Please give it a try following the new procedure step by step and let me know. First of all you need to unlock the boot loader. Then do again what you already did.

antonio2009 said:
​
I am sorry, I have the themes market so even if you go till the end with the C432 you will get it. Did you check the updated procedure in the starting post? Please give it a try following the new procedure step by step and let me know. First of all you need to unlock the boot loader. Then do again what you already did.
Click to expand...
Click to collapse
To be honest i´m afraid that i will brick my phone What tool i need? Android SDK? SRK TOOL? I am confused lol
---------- Post added at 03:00 PM ---------- Previous post was at 02:53 PM ----------
PHASE 1 - unlocking the boot loader
0. Install Android SDK (Android studio is ok) and make sure on command line you can execute "fastboot" command and "adb" command; | Where i execute it? On Android Studio? CMD of windows?
1. get the serial number. On the phone keyboard digit *#*#2846579#*#* then select 2. Veneer Informations and then 3. Other Info. Take note of the serial number. You will need also your phone IMEI code (you can get it from phone settings->phone status);
2. Go to this link and get the bootloader unlock code.
3. Now to start the phone in boot mode you need to:
a. shutdown the phone
b. press simultaneously volume- and power button until you get to the boot loader page
c. open a cmd shell and write down the command: fastboot oem unlock <put-here-your-unlock-code>. If the code is right the bootloader will be unlocked and the phone will factory reset and reboot.

ehduarte said:
To be honest i�m afraid that i will brick my phone What tool i need? Android SDK? SRK TOOL? I am confused lol
Click to expand...
Click to collapse
I can help you to do this but I cannot take any responsibility in case you brick your phone. I made many many trials before getting to the right result and personally I don't think that you can brick the phone. But this is your own responsibility I cannot take it.. the only thing I can do is try helping you. Is this clear?
If you decided to try.. I found a useful thread that will install ADB and fastboot in 15 seconds..
First of all anyway you have to get the "bootloader unlock code" from huawei at this link by registering your phone. This is described in PHASE 1 steps.

ehduarte said:
To be honest i´m afraid that i will brick my phone What tool i need? Android SDK? SRK
Click to expand...
Click to collapse
I just wanted to clarify in addition that if you unlock the bootloader you will probably invalidate the warranty... once the boot loader is locked again it says "relocked" so it is clear that it was unlocked at least once.

If i install the original rom i´ve had everything will be back to normal? Will revert back to co2 vodafone brand?
---------- Post added at 03:42 PM ---------- Previous post was at 03:41 PM ----------
antonio2009 said:
I can help you to do this but I cannot take any responsibility in case you brick your phone. I made many many trials before getting to the right result and personally I don't think that you can brick the phone. But this is your own responsibility I cannot take it.. the only thing I can do is try helping you. Is this clear?
If you decided to try.. I found a useful thread that will install ADB and fastboot in 15 seconds..
First of all anyway you have to get the "bootloader unlock code" from huawei at this link by registering your phone. This is described in PHASE 1 steps.
Click to expand...
Click to collapse
I have already the code.
---------- Post added at 03:43 PM ---------- Previous post was at 03:42 PM ----------
antonio2009 said:
I just wanted to clarify in addition that if you unlock the bootloader you will probably invalidate the warranty... once the boot loader is locked again it says "relocked" so it is clear that it was unlocked at least once.
Click to expand...
Click to collapse
So... If it says relocked it voids the warranty also right?

ehduarte said:
So... If it says relocked it voids the warranty also right?
Click to expand...
Click to collapse
right

For those of us that installed a European unbranded rom in a branded phone, to be back as it was, receiving OTA, themes market working, etc etc... Just install the original ROM that your phone had and all is back to normal.
Though i will try to put an european unbranded rom, as it receives updates quicker than an unbranded one.
When i try the Antonio method and i hope i´ll be successful i´ll inform you guys

Related

Help rooting Huawei P7 L10 B839 Lollipop 5.1.1 & UNLOCKING BOOTLOADER

Hello guys, I need help with this and I know a lot of people need info about this too, I want to root my Huawei P7 L10 with Android Lollipop 5.1.1 (P7-L10C900B839). I already tried with ROOT GENIUS and it didn't work, I got a message something like right now there is not root for my phone, and another saying that the phone disconnected from the pc WHICH IS NOT TRUE. So, could anyone help me please? Also, I don't want to unlock the bootloader, I may be wrong so you should correct me if I am but I think if I just want to root I don't necessarily have to unlock the bootloader, I just want the root for a few minimal changes (to change the font since EMUI 3.1 doesn't let us do that and apply the new emojis to my phone changing a system file). So yeah, could anyone help me, I already checked the other threads and they only suggested a procedure involving unlocking the bootloader...so HEEEEEEEEEEEEEELP PLEASE :crying:
there is no other way than unlocking bootloader if you want to root your phone..
for b839 you need to replace the stock recovery with the newest TWRP custom recovery..
through this you can flash the super su (should be available as a zip-file)..
after that you have to delete the set_immutable.list by installing busybox and through commands by a terminal emulator..
when you have done these steps you should have successfully rooted your phone..
if you have read the threads entirely you should have read these information as well - because this had been adviced many times since the b805 beta..
for replacing stock boot or recovery it is always neccessary to unlock the bootloader, otherwise you will always get a "failed" if you try to flash a custom one..
Gesendet von meinem HUAWEI P7-L10 B852
Ok thank you for clearing this to me, I wasn't sure so I asked. Now I wish you could tell us step by step how to unlock the bootloader of the B839, I read the [GUIDE][HOW-TO] Unlock Bootloader Huawei Ascend P7-L10 thread but they talk about the B121, B126, nothing about B839
I used to root my phones long time a go, so I have a little experience, but I have never unlocked a bootloader or rooted a huawei, this is my first huawei. Could you please help me with this? I Know there are people looking info about B839 too. Thank you.
HowlingSoul said:
Ok thank you for clearing this to me, I wasn't sure so I asked. Now I wish you could tell us step by step how to unlock the bootloader of the B839, I read the [GUIDE][HOW-TO] Unlock Bootloader Huawei Ascend P7-L10 thread but they talk about the B121, B126, nothing about B839
I used to root my phones long time a go, so I have a little experience, but I have never unlocked a bootloader or rooted a huawei, this is my first huawei. Could you please help me with this? I Know there are people looking info about B839 too. Thank you.
Click to expand...
Click to collapse
It's really simple, once you've unlocked your bootloader and updated to the latest stock firmware, just flash a custom recovery using flashtool (flashtool flash recovery RECOVERYNAME.img) and flash supersu zip in recovery.
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
http://www.mediafire.com/download/wl1gua834qefkvy/recovery_cwm_emui3.0_B609.img
Ok, but I don't know how to unlock the bootloader part sorry, as I said I have never done that. But the other things you said and the other person above about the flashing a custom recovery and flashing super su zip I think I don't have any more questions, although I don't know why in the second link you sent it says emui3.0 and B609, it will work with my lollipop 5.1.1 emui 3.1 and B839? because downgrading is not an option
HowlingSoul said:
Ok, but I don't know how to unlock the bootloader part sorry, as I said I have never done that. But the other things you said and the other person above about the flashing a custom recovery and flashing super su zip I think I don't have any more questions, although I don't know why in the second link you sent it says emui3.0 and B609, it will work with my lollipop 5.1.1 emui 3.1 and B839? because downgrading is not an option
Click to expand...
Click to collapse
Hi everyone!
I just purchased a P7-L12 and I just upgraded to Lollipop 5.1.1. I'm very sure this update locked bootloader. Previous versions have unlocked bootloader.
Does anybody know the steps to unlocked this?
on huawei website should be a button for unlocking bootloader..
it is a small one..
just so the steps the website asks to do and you should get clear instructions how to unlock your bootloader..
Gesendet von meinem HUAWEI P7-L10 B852
dude this should help you..
download adb or fastboot programs on you computer then go to the same file were you installed them then press Control button at keyboard then right click then you get option to open with fastboot
then once you get the cmd screen follow the instruction in the picture
abuelzoz2005 said:
dude this should help you..
download adb or fastboot programs on you computer then go to the same file were you installed them then press Control button at keyboard then right click then you get option to open with fastboot
then once you get the cmd screen follow the instruction in the picture
Click to expand...
Click to collapse
I think this is the right help! But the picture is uncompleted. Could you send the thread link of this picture?
sorry but I have as a screen shot...but I think it's clear...
abuelzoz2005 said:
sorry but I have as a screen shot...but I think it's clear...
Click to expand...
Click to collapse
Here it is: http://forum.xda-developers.com/ascend-p7/general/guide-unlock-bootloader-p7-l10-oem-t3062851
I just tried the dialer code thing and I got this:
FAILED (remote: data parse fail)
boss follow these procedures
1- Download adb or fastboot programs and save them to c: partition on your computer.
2- go to the file were you download the programs.
3- Press ctrl button at keyboard and right click at the mouse at same time.
4- You one option I don't remember exactly but it says something like open file here with adb.
5- You get the cmd screen for adb then you should type the following:
a- adb reboot bootloader.
b- fastboot oem unlock UNLOCK CODE.
It's not going to work, you need to request huawei for unlocking code
yaaa this is what I told him he needs to have unlock code that's why I capitalized this word.
Just go on huawei website and find about bootloader unlocking code. Its very simple
tommykole96 said:
Just go on huawei website and find about bootloader unlocking code. Its very simple
Click to expand...
Click to collapse
This is the link to unlock bootloader:
http://emui.huawei.com/en/plugin.php?id=hwdownload&mod=list
There is a button Unlock Bootloader. Fill the form and then the unlock code will be generated!
I always get "server is busy" or something like that....
Try to login with your facebook-account. That worked fine for me
bluescoobie said:
I always get "server is busy" or something like that....
Click to expand...
Click to collapse
Hi!
Which link are you trying with?
I follow the link from your post....
Reyse said:
Hi!
Which link are you trying with?
Click to expand...
Click to collapse

DCUnlocker does not work !

What can I do ?
http://www.noelshack.com/2016-32-1470686320-capture.png
And even through the Huawei site I receive the code does not work.
For the software to work, you must setup the phone to be in manufacturer mode. See https://www.dc-unlocker.com/huawei-android-hisilicon-unlock-guide. Once you do that and use dc-unlocker software, then you will see the phone plus all options (those that appear presently disabled) will be enabled.
I did , but that does not change when I reboot
hmmm....you don't need to reboot....Just type *#*#2846579#*#*, select "Project Menu", "Background settings", "USB ports settings", "Manufacture mode". Then connect phone to PC and start dc-unlocker. When you search for devices, you will see your P9 with the options on the top right enabled.
---------- Post added at 09:57 PM ---------- Previous post was at 09:54 PM ----------
I unlocked my phone and then de-branded it. I used dc-unlocker to unlock bootloader by purchasing needed credits.
I got the code! but it does not work
http://www.noelshack.com/2016-32-1470690356-capture.png
I'll teach him to fly, this system code makes me crazy
Ok. I don't know how or where you got the code from but assume it is not right. I say this as I used my code against the phone on a couple of occasions (change a c900 to a c432 version, etc) without any issue. Assuming it is not right, I suggest you buy credits on dc-unlocker direct. I think it is 4 euros or something like that. You just select the unlock option and it does it all for you.
I took the bootloader code and it does not work
http://www.noelshack.com/2016-32-1470691341-capture.png
Ok. Did you enable the property in Settings > Developer Options > Enable OEM Unlock ?
the code does not work, then I have had with DC Unlocker
I still like what solution?
I have 2 solutions:
1- You can try disabling "phone finder" app and try unlocking after. Some say this is the cause of making the bootloader being unable to unlock.
2- If the first solution didn't work, you can try flashing an older firmware on your phone.
I hope one of these work for you.
I can flash a firmware without unlocking the bootloader ?
I do not apply ' phone finder ' in my application ...
spartan02sparte said:
I can flash a firmware without unlocking the bootloader ?
I do not apply ' phone finder ' in my application ...
Click to expand...
Click to collapse
You don't need an unlocked bootloader to flash a firmware using the 3 button method. Try to flash an older firmware and then try to unlock your bootloader again.
vladimir_carlan said:
You don't need an unlocked bootloader to flash a firmware using the 3 button method. Try to flash an older firmware and then try to unlock your bootloader again.
Click to expand...
Click to collapse
Thank you ca I'll try tonight! And it is better that I get the code via the parameter devleopeur or something?
spartan02sparte said:
Thank you ca I'll try tonight! And it is better that I get the code via the parameter devleopeur or something?
Click to expand...
Click to collapse
The easiest way is using SRK Tools.
vladimir_carlan said:
The easiest way is using SRK Tools.
Click to expand...
Click to collapse
I do not know how to use it : /
Same for a flash ROM, you have good tutorial ?
spartan02sparte said:
I do not know how to use it : /
Same for a flash ROM, you have good tutorial ?
Click to expand...
Click to collapse
To flash a firmware, download it, copy it on a /dload folder of an external sdcard and then boot your phone holding both volume buttons and power button. About SRK tool just look at dedicated thread. Is really simple to use it.
vladimir_carlan said:
To flash a firmware, download it, copy it on a /dload folder of an external sdcard and then boot your phone holding both volume buttons and power button. About SRK tool just look at dedicated thread. Is really simple to use it.
Click to expand...
Click to collapse
You advise me as what rom ?
I don't know what you want to do by unlocking the bootloader, but try using this SRK Tool. This should do the job as it also allows generation of the bootloader code plus unlock.
spartan02sparte said:
You advise me as what rom ?
Click to expand...
Click to collapse
What version do you have?
vladimir_carlan said:
what version do you have?
Click to expand...
Click to collapse
eva-l09c530b121

Huawei p8 lite 2017 bricked after wrong oem flash

(SOLVED) So I wanted to debrand my phone, and I saw this post https://forum.xda-developers.com/p9/development/c432-oeminfo-flash-twrp-t3384903
problem is, the oem I flashed with twrp was for the p9 lite, now my phone doesn't boot inside the os, it only goes to huawei erecovery but the download always fails. I can boot to fastboot mode but everything I try to do it says command not allowed, only fastboot devices work
I hope someone can help me as I really need my phone for work, thanks very much
my original cust was C02
I also have a twrp backup I did, but I just cant get inside twrp because as soon the phone turns on it goes to erecovery
Edit: i finally resolved and I'm going to really help you if you flashed the wrong oem file just like me, just follow these steps:
1. since you installed a new oeminfo, you are gonna need to unlock the bootloader again, (just like you did the first time), but wait! here is what I did wrong, when you request an unlock code, huawei in the unlock page is gonna ask you for your imei and serial number, I was lazy and I got my imei via fastboot instead of checking the one on my phone's box, worst idea ever because when you flash another oem your imei is gonna change so that's why in the site it said sn and imei are mismatching, so take the IMEI on your phone's box and NOT via fastboot. Anyway, let's go to part 2
2. in the unlocking site they are gonna ask for a product id wich you can get by writing *#*#1357946#*#* in the phone's dialpad, but you're probably thinking "how can I do that if my phone does't boot the os?" but don't worry my brudda! just download this https://cloud.mail.ru/public/KGmS/1cEhHg1G6 , open it and chose huawei y300-0100 as product model, then put your IMEI (take the one from your phone's box!!) and it's gonna give you the product id you need in the huawei site.
3. once they give you the unlocking password, power off your huawei and connect it in your pc with your usb while holding the volume down button, you should go in fastboot mode
4. once you are in fastboot mode write in the cmd fastboot oem unlock (9982883838382365) <<(instead of this numbers write the unlocking password they gave you in the huawei unlocking site) aaaand done, you unlocked the bootloader once again.
5. if you previously had twrp (before flashing the wrong oem file) it's gonna pop up when you boot the phone, now you can use fastboot or twrp again to flash the right oem (or stock rom)
I REALLY HOPE I'M GONNA HELP YOU BECAUSE I KNOW HOW BAD IT FEELS WHEN YOU BRICK YOUR DEVICE LIKE I DID!!
Now bye everyone I need to go play soccer and I'm late
yeahboi99 said:
So I wanted to debrand my phone, and I saw this post https://forum.xda-developers.com/p9/development/c432-oeminfo-flash-twrp-t3384903
problem is, the oem I flashed with twrp was for the p9 lite, now my phone doesn't boot inside the os, it only goes to huawei erecovery but the download always fails. I can boot to fastboot mode but everything I try to do it says command not allowed, only fastboot devices work
I hope someone can help me as I really need my phone for work, thanks very much
my original cust was C02
I also have a twrp backup I did, but I just cant get inside twrp because as soon the phone turns on it goes to erecovery
Click to expand...
Click to collapse
FRP status? (in fastboot)
Phone status? (in fastboot)
unlock the bootloader again, even if it says its locked, after that fastboot should work fine. then you can try again booting into twrp and flash the right oeminfo
Alex261099 said:
FRP status? (in fastboot)
Phone status? (in fastboot)
Click to expand...
Click to collapse
Hi thanks for the reply
when I open fastboot under the little android guy it says:
PHONE Unlocked
FRP Unlock
yeahboi99 said:
Hi thanks for the reply
when I open fastboot under the little android guy it says:
PHONE Unlocked
FRP Unlock
Click to expand...
Click to collapse
firstly try to unlock the bootloader
if nothing happens
a. start praying
b. relock and then unlock the bootloader.... it's the only thing that i have in mind
i'm not responsible for any damage
Striike said:
unlock the bootloader again, even if it says its locked, after that fastboot should work fine. then you can try again booting into twrp and flash the right oeminfo
Click to expand...
Click to collapse
hi thx for the tip but i'm in the huawei unlock page and it's asking me for my phone's product id, wich you can only get by dialing *#*#1357946#*#* in the dialpad
yeahboi99 said:
hi thx for the tip but i'm in the huawei unlock page and it's asking me for my phone's product id, wich you can only get by dialing *#*#1357946#*#* in the dialpad
Click to expand...
Click to collapse
have you ever unlocked your bootloader?
have you saved the code? it's the same
Alex261099 said:
have you ever unlocked your bootloader?
have you saved the code? it's the same
Click to expand...
Click to collapse
I unlocked my bootloader once but I didn't save the code, I still have the account I used the first time tho
yeahboi99 said:
I unlocked my bootloader once but I didn't save the code, I still have the account I used the first time tho
Click to expand...
Click to collapse
have you used windows for unlocking?
if yes windows 10?
if yes have you used powershell?
if yes press arrow up until you see fastboot oem unlock "number", copy the number (it's the code!!!)
if no .... idk i'll do some research
yeahboi99 said:
I unlocked my bootloader once but I didn't save the code, I still have the account I used the first time tho
Click to expand...
Click to collapse
Lesson in life: ALWAYS save the bootlocker unlock code
Good luck
Alex261099 said:
have you used windows for unlocking?
if yes windows 10?
if yes have you used powershell?
if yes press arrow up until you see fastboot oem unlock "number", copy the number (it's the code!!!)
if no .... idk i'll do some research
Click to expand...
Click to collapse
I used cmd in windows 10 and it doesn't have the arrow key
thanks for helping me XD and by the way I checked my imei on a site and it says that my device is a p9 (what the heck?) I guess I need to install some p9 files to make my phone work again?
grazie
yeahboi99 said:
I unlocked my bootloader once but I didn't save the code, I still have the account I used the first time tho
Click to expand...
Click to collapse
you should have got an email with the code in it, it was like this for me.
Striike said:
you should have got an email with the code in it, it was like this for me.
Click to expand...
Click to collapse
I got it directly in the site I also tried this method https://forum.xda-developers.com/p9/help/how-to-product-id-bricked-p9-t3561156
but when I click on commit after writing all in the huawei unlock site bars it says SN and IMEI are mismatched
I mean you really f***ed up there. I thought that you could restore the device by eRecovery but If you would do that you would brick it completely bc it would Download everything for the p9...
you can't do anything without the unlock Code.
You could otherwise try to force upgrade via dload
---------- Post added at 09:05 PM ---------- Previous post was at 09:02 PM ----------
You could try this Generator https://cloud.mail.ru/public/KGmS/1cEhHg1G6
or DC unlocker (costs money)
You can use Firmware finder for PC and eRecovery DNS method to restore your phone to any firmware you want

I have a Huawei Mate 10 wich after hard brick (COM1) 6 mounth ago wake up himself!!!

I have a Huawei Mate 10 wich after hard brick (COM1) 6 mounth ago wake up himself!!!
Fastboot is works
Bootloader locked
eRecovery works
Stock recovery works
I have a my phone bootloader key
But DC Phoenix not flash any update.app or board.dgtks file (DC gives evrytime ERROR... device not supported, flashing incomplet). Flashing stops befor DC phoenix can open backdoor.
In fastboot works only one command, that is FASTBOOT DEVICES, and result is 123456789ABCDEF
I can*t flash nothing in fastboot vommand line: gives me error for example:
FASTBOOT FLASH OEMINFO OEMINFO.IMG
sending `oeminfo` 378kb...
OKAY
Writing `oeminfo`...
FAILED remote: Command not allowed
Any fastboot command ends with that error
eRecovery get errors after try flash WIFI DNS firmware finder.
Device lost all: oeminfo, vendor, IMEI, model
And only founded information by DC/HCU/fastboot is device name 0123456789ABCDEF
What i can to do to fix that?
Thanks
Have you tried an update via erecovery?
mikaole said:
Have you tried an update via erecovery?
Click to expand...
Click to collapse
Yes, of course i tryed. But i said...nothing is works. All methods gives error
I know my bootloader code, but i dont change to use it for open.
OEMINFO is damaged, lost all device information parameters
Edkalax said:
Yes, of course i tryed. But i said...nothing is works. All methods gives error
I know my bootloader code, but i dont change to use it for open.
OEMINFO is damaged, lost all device information parameters
Click to expand...
Click to collapse
You should try the test point method that wr are discussing here - > https://forum.xda-developers.com/mate-10/how-to/discussion-hard-brick-infos-t3789044/page28
Pretoriano80 said:
You should try the test point method that wr are discussing here - > https://forum.xda-developers.com/mate-10/how-to/discussion-hard-brick-infos-t3789044/page28
Click to expand...
Click to collapse
YES, i can access to testpoint, but what i can do next? DC phoenix and board with COM1? Thats no working, or works?
Edkalax said:
YES, i can access to testpoint, but what i can do next? DC phoenix and board with COM1? Thats no working, or works?
Click to expand...
Click to collapse
Yes, you must flash the board with DC Phoenix. And if you don't have the nvme backup, then avoid flashing that when you flash the board.
Follow the latest posts from that thread, to understand how to put it in COM1 with the test point.
Pretoriano80 said:
Yes, you must flash the board with DC Phoenix. And if you don't have the nvme backup, then avoid flashing that when you flash the board.
Follow the latest posts from that thread, to understand how to put it in COM1 with the test point.
Click to expand...
Click to collapse
Ok, yes i know about all that you say me, but 6 month ago if my phone is hard bricked, i tryed with COM1 and over world i think trying with my 10 000 peoples or more do that, but DC Phoenix gives ERROR: Bootloader flashing incompleted
Today, my phone wake up, that is amazing, but still have problem about wghat UP my post im starting
Edkalax said:
Ok, yes i know about all that you say me, but 6 month ago if my phone is hard bricked, i tryed with COM1 and over world i think trying with my 10 000 peoples or more do that, but DC Phoenix gives ERROR: Bootloader flashing incompleted
Today, my phone wake up, that is amazing, but still have problem about wghat UP my post im starting
Click to expand...
Click to collapse
That COM1 was kind of "fake" and Phoenix couldn't flash anything. With test point it should work just fine.
Pretoriano80 said:
That COM1 was kind of "fake" and Phoenix couldn't flash anything. With test point it should work just fine.
Click to expand...
Click to collapse
For knowing to all. Testpoint not help, tryed
@Edkalax
Did you tryed a working dload image for your model in dload-firmware mode?
-with a build GREATER than the one you previously were on with your ALP ?
I don't know if your cust was blanked like boardnumber and imeis in your previous doing with your phone and what it does imply for dload images which are normally not cross cust compatible...
If bootloader is locked that's the reason why you can't flash. You'd have to unlock it.
Also, oeminfo can not be flashed with fastboot with "regular" unlock.
oslo83 said:
@Edkalax
Did you tryed a working dload image for your model in dload-firmware mode?
-with a build GREATER than the one you previously were on with your ALP ?
I don't know if your cust was blanked like boardnumber and imeis in your previous doing with your phone and what it does imply for dload images which are normally not cross cust compatible...
Click to expand...
Click to collapse
Yes i tried DLOAD with SD card and 3 buttons Vol +; Vol -; Power...not flashed, getting information failed
ante0 said:
If bootloader is locked that's the reason why you can't flash. You'd have to unlock it.
Also, oeminfo can not be flashed with fastboot with "regular" unlock.
Click to expand...
Click to collapse
I have bootloader code for my phone, but i cant use it. How i do that?
Edkalax said:
I have bootloader code for my phone, but i cant use it. How i do that?
Click to expand...
Click to collapse
Well, it's fastboot oem unlock UNLOCK_CODE, but if you tried that already it won't work.
If your oeminfo is corrupt that might be why, as it reads imei and SN from oeminfo to calculate unlock code.
return in warranty if bootloader locked
the only fix is to send it to huawei service what ever bootloader locked or unlocked
i received my mate 10 ( hard brick ) today from huawei service ,, they replaced Motherboard cos still under warranty
---------- Post added at 11:43 PM ---------- Previous post was at 11:38 PM ----------
one more thing ,, tried to fix it with all paid &free tools available but No .
the only solution is to send it to huawei service and do not mention any thing about unlocked bootloader . and they will fix it

your device has been unlocked and can't be trusted huawei p9

Hello i have bought P9 for cheap form some guy who ( i think bricked the pohone) when you try to Turn it on the message pops out Like the Title, SO i searched online and yeah i found some guides but problem is they all need to recognize device in Usb, I cant recognize my device on Usb when i put it on Usb first it was Printer ( then i try to Delete drivers and manualy install Huawei p9 drivers but noting) now when i put it on usb i hear the sound in windows but i cant find it so i had to Device menager and i think it's ABD something. + when i hold Volume down And put usb to enter fast boot it says Phone unlocked Frp unlocked. So any help ? what shall i do?, I know i need to Wipe whole system on phone ( or something like that ) and install new one but i cant when i cant connect my phone to usb, Ps Sorry for my bad english
Cope92 said:
Hello i have bought P9 for cheap form some guy who ( i think bricked the pohone) when you try to Turn it on the message pops out Like the Title, SO i searched online and yeah i found some guides but problem is they all need to recognize device in Usb, I cant recognize my device on Usb when i put it on Usb first it was Printer ( then i try to Delete drivers and manualy install Huawei p9 drivers but noting) now when i put it on usb i hear the sound in windows but i cant find it so i had to Device menager and i think it's ABD something. + when i hold Volume down And put usb to enter fast boot it says Phone unlocked Frp unlocked. So any help ? what shall i do?, I know i need to Wipe whole system on phone ( or something like that ) and install new one but i cant when i cant connect my phone to usb, Ps Sorry for my bad english
Click to expand...
Click to collapse
Your Bootloader is unlocked - if you would ever want to hack the phone, you will need the unlocked Bootloader
And be aware that Huawei does no more provide Bootloader keys, those who want to unlock Bootloader must go for paid alternative services
zgfg said:
Your Bootloader is unlocked - if you would ever want to hack the phone, you will need the unlocked Bootloader
And be aware that Huawei does no more provide Bootloader keys, those who want to unlock Bootloader must go for paid alternative services
Click to expand...
Click to collapse
Well i think this phone bootloader is unlocked? how can i check that? Btw my phone is recognize as somehing 3650 on usb
Cope92 said:
Well i think this phone bootloader is unlocked? how can i check that? Btw my phone is recognize as somehing 3650 on usb
Click to expand...
Click to collapse
You should find and install Huawei drivers and HiSuite - it usually installs automatically...
Have the phone switched off, onnect to PC by USB, press and keep pressing Vol- and voot by Pow - it should boot to Fastboot, on the bottom it has to display if FRP and Phone +Bootloader) are locked or unlocked.
PS From your first post it seems you already checked in Fastboot and found that indeed FRP and Bootloader are unlocked
zgfg said:
You should find and install Huawei drivers and HiSuite - it usually installs automatically...
Have the phone switched off, onnect to PC by USB, press and keep pressing Vol- and voot by Pow - it should boot to Fastboot, on the bottom it has to display if FRP and Phone +Bootloader) are locked or unlocked.
PS From your first post it seems you already checked in Fastboot and found that indeed FRP and Bootloader are unlocked
Click to expand...
Click to collapse
Yeah i installed drivers for huawei p9 i typed on google Usb Drivers for Huawei p9" and i installed them then i installed HiSuite i can provide you with pictures, And yes i Press volume - and pluge usb then i go in Fastboot but i cant do anything in fastboot white screen stuck and says phone unloacked FRP unloacked ( no bootloader in any text ).. Anyway if it's unloacked is that good or bad thing? My main problems is that my pc cant recognize phone... when i pluge it in in device menager it says it's " ADB interface when u expand its Fastboot interface (google USB ID ) you have picture
zgfg said:
You should find and install Huawei drivers and HiSuite - it usually installs automatically...
Have the phone switched off, onnect to PC by USB, press and keep pressing Vol- and voot by Pow - it should boot to Fastboot, on the bottom it has to display if FRP and Phone +Bootloader) are locked or unlocked.
PS From your first post it seems you already checked in Fastboot and found that indeed FRP and Bootloader are unlocked
Click to expand...
Click to collapse
Here are the all pictures ( after i deleted device ADB ) now it's you have all picture something 3650. Then here is photos when you try to turn pohone on messages, and in Download and recovery i cant select my wifi or any wifi, coz when i navigate with volume up there is no select u can only navigate back to Back and exit... :/ dont know what to do.... main problem is USB i think. P.S when i pluge the phone on usb cable Hisuite turns auto on but it cant recognize my phone
Cope92 said:
Here are the all pictures ( after i deleted device ADB ) now it's you have all picture something 3650. Then here is photos when you try to turn pohone on messages, and in Download and recovery i cant select my wifi or any wifi, coz when i navigate with volume up there is no select u can only navigate back to Back and exit... :/ dont know what to do.... main problem is USB i think. P.S when i pluge the phone on usb cable Hisuite turns auto on but it cant recognize my phone
Click to expand...
Click to collapse
Few comments
1) If you connect to the particular WiFi from System, phone will remember and should automatically connect to the same from eRecovery
2) Try another USB cable, another USB port or another PC
Also, when USB cable is connected, check if phone asks you anything to confirm
If you try to connect from HiSuite, it will give you guides what 'to do'
3) Unlocked FRP causes the 'unsecure,' note at booting.
But as long as your Bootloader is unlocked, better keep also FRP unlocked (unlocked Bootloader with locked FRP makes no sense)
4) Unlocked Bootloader and FRP are not 'dangerous' - only if you go yourself and flash something wrong or wrong way
As already wrote, hackers prefer unlocked Bootloader.
Also if you anyhow brick the phone, you will need unlocked Bootloader to flash the fix.
Moreover, locking Bootloader also requires certain expertise to do it safely, so I really suggest you to keep it as that at the moment (until you solve PC connection and become familiar with ADB and so
zgfg said:
Few comments
1) If you connect to the particular WiFi from System, phone will remember and should automatically connect to the same from eRecovery
2) Try another USB cable, another USB port or another PC
Also, when USB cable is connected, check if phone asks you anything to confirm
If you try to connect from HiSuite, it will give you guides what 'to do'
3) Unlocked FRP causes the 'unsecure,' note at booting.
But as long as your Bootloader is unlocked, better keep also FRP unlocked (unlocked Bootloader with locked FRP makes no sense)
4) Unlocked Bootloader and FRP are not 'dangerous' - only if you go yourself and flash something wrong or wrong way
As already wrote, hackers prefer unlocked Bootloader.
Also if you anyhow brick the phone, you will need unlocked Bootloader to flash the fix.
Moreover, locking Bootloader also requires certain expertise to do it safely, so I really suggest you to keep it as that at the moment (until you solve PC connection and become familiar with ADB and so
Click to expand...
Click to collapse
Thanks for the replays very much . Well i played a little and i installed ADB drivers and i updated my device to Android device in device menager. I connected with power shell with ADB platrofm and I can only use Fastboot ( coz i cant enter in the system and enable debuging ) So now im downloding new rom Europe nugat one, 1.7 gb... Can i Delete System with Fastboot? and then Flash new with it? Or shall i just Dirty flash it over this one with Fastboot?. Im in fear if i delete whole system with fastboot that my phone will be totaly bricked and i cant even use Fastboot anymore?
Cope92 said:
Thanks for the replays very much . Well i played a little and i installed ADB drivers and i updated my device to Android device in device menager. I connected with power shell with ADB platrofm and I can only use Fastboot ( coz i cant enter in the system and enable debuging ) So now im downloding new rom Europe nugat one, 1.7 gb... Can i Delete System with Fastboot? and then Flash new with it? Or shall i just Dirty flash it over this one with Fastboot?. Im in fear if i delete whole system with fastboot that my phone will be totaly bricked and i cant even use Fastboot anymore?
Click to expand...
Click to collapse
What is your current Huawei stock version?
I thought you could boot to System...
From Fastboot, execute the following commands and copy/paste the answers
Code:
fastboot oem get-bootinfo
fastboot getvar vendorcountry
fastboot oem get-build-number
fastboot oem oeminforead-SYSTEM_VERSION
zgfg said:
What is your current Huawei stock version?
I thought you could boot to System...
From Fastboot, execute the following commands and copy/paste the answers
Code:
fastboot oem get-bootinfo
fastboot getvar vendorcountry
fastboot oem get-build-number
fastboot oem oeminforead-SYSTEM_VERSION
Click to expand...
Click to collapse
Here it is picture down. Well no i cant enter system or anything only fastboot with ADB, well i bought this phone used cheep 40 euros guy told me he bricked him and dont know to fix except that everything works ( i hope so ) now i need to unbrick phone i did it on s3 neo long time ago with huawei is harder :s
I have the same problem with my Huawei p9. It was unlocked by oneclickroot, with magisk 18. I'm not bothered about the unlocked bootloader or from, as the phone is rooted and works well. I just want to get rid of the warning and time delay, when I turn the phone on. Does anyone know what files need to be deleted to get rid of it and if possible the time delay, which I suppose is only about 10 seconds ,but very annoying.
Cope92 said:
Here it is picture down. Well no i cant enter system or anything only fastboot with ADB, well i bought this phone used cheep 40 euros guy told me he bricked him and dont know to fix except that everything works ( i hope so ) now i need to unbrick phone i did it on s3 neo long time ago with huawei is harder :s
Click to expand...
Click to collapse
Ok, so you are on cust c900, MM b166 build
i) You must first upgrade from c900b166 to c900b182 - follow this guide:
https://forum.xda-developers.com/showpost.php?p=75855436&postcount=612
From that guide you must do only steps (7) and (8) - they describe DLOAD method for installing (in your case upgrading to) EVA-L09c900b182
ii) Once you will be on c900b182, you have to rebrand to cust c432 from where you will receive OTA upgrades to Nougat firmwares - follow this guide
https://forum.xda-developers.com/showpost.php?p=72153575&postcount=2
This is assuming your phone is single SIM, aka L09 (not dual SIM aka L19) - so, is your phone single SIM L09?
Actually, guide from (ii) covers both cases L09 and L19.
But in step (i), for L19, you would need to install EVA-L19c900b182, while the guide describes and gives the download for EVA-L09c900b182
---------- Post added at 01:00 AM ---------- Previous post was at 12:49 AM ----------
Nokieran said:
I have the same problem with my Huawei p9. It was unlocked by oneclickroot, with magisk 18. I'm not bothered about the unlocked bootloader or from, as the phone is rooted and works well. I just want to get rid of the warning and time delay, when I turn the phone on. Does anyone know what files need to be deleted to get rid of it and if possible the time delay, which I suppose is only about 10 seconds ,but very annoying.
Click to expand...
Click to collapse
Guys, iif you don't like that warning - then never unlock Bootloader and never do rooting, etc
You can only get rid of that warning by relocking your Bootloader (it will lock also FRP).
BUT, re-locking Bootloader triggers Hard Reset - with Hard Reset you would loose Magisk, root , etc
EVEN WORSE, Hard Resetting with the root, may brick the phone
Do you really want all that?
If you don't like this warning at boot, you should have stayed with locked Bootloader and with stock firmware, without rooting, etc
This thing has been anwered/discussed elswhere and zillion times (hence IMO, people need to read, get informed and think in advance, and those who are so iritated with this warning note at boot must not go in modding the phone)
zgfg said:
Ok, so you are on cust c900, MM b166 build
i) You must first upgrade from c900b166 to c900b182 - follow this guide:
https://forum.xda-developers.com/showpost.php?p=75855436&postcount=612
From that guide you must do only steps (7) and (8) - they describe DLOAD method for installing (in your case upgrading to) EVA-L09c900b182
ii) Once you will be on c900b182, you have to rebrand to cust c432 from where you will receive OTA upgrades to Nougat firmwares - follow this guide
https://forum.xda-developers.com/showpost.php?p=72153575&postcount=2
This is assuming your phone is single SIM, aka L09 (not dual SIM aka L19) - so, is your phone single SIM L09?
Actually, guide from (ii) covers both cases L09 and L19.
But in step (i), for L19, you would need to install EVA-L19c900b182, while the guide describes and gives the download for EVA-L09c900b182
---------- Post added at 01:00 AM ---------- Previous post was at 12:49 AM ----------
My friend i wont be home whole day, i will be later at 17h pm. Im from Serbia That is small country in Europe. If i update all that you said? will my network work (sim card) i can picture you sim card i have 1 space for sim card and 1 for memory or that is hybrid? down in picture i have combination of eva L09 sim card slot
Click to expand...
Click to collapse
Cope92 said:
zgfg said:
Ok, so you are on cust c900, MM b166 build
i) You must first upgrade from c900b166 to c900b182 - follow this guide:
https://forum.xda-developers.com/showpost.php?p=75855436&postcount=612
From that guide you must do only steps (7) and (8) - they describe DLOAD method for installing (in your case upgrading to) EVA-L09c900b182
ii) Once you will be on c900b182, you have to rebrand to cust c432 from where you will receive OTA upgrades to Nougat firmwares - follow this guide
https://forum.xda-developers.com/showpost.php?p=72153575&postcount=2
This is assuming your phone is single SIM, aka L09 (not dual SIM aka L19) - so, is your phone single SIM L09?
Actually, guide from (ii) covers both cases L09 and L19.
But in step (i), for L19, you would need to install EVA-L19c900b182, while the guide describes and gives the download for EVA-L09c900b182
---------- Post added at 01:00 AM ---------- Previous post was at 12:49 AM ----------
My friend i wont be home whole day, i will be later at 17h pm. Im from Serbia That is small country in Europe. If i update all that you said? will my network work (sim card) i can picture you sim card i have 1 space for sim card and 1 for memory or that is hybrid? down in picture i have combination of eva L09 sim card slot
Click to expand...
Click to collapse
No problem, after upgrading to Nougat everything will work
Im pretty sure that if you buy Huawei (if they still sell P9) from your mobile provider, it will for sure come with Nougat
Btw, there is something strange with that c900 cust, if you dig to old XDA posts, you will see that c900 was popular few years ago, people thought it was kind of "generic' intermational cust and many rebranded to c900 from regional custs - but later rebranded back (usually to c432 European or some other like Mediterranean or Latin America ) because all other custs were upgraded to Nougat except that c900. Not sure if Huawei was ever selling phones with c900, or it was only used for the phones bought in China (cheaper) and rebranded then for international market (all languages, getting rid of Chinese bloatware)
Nevertheless, don't worry and escape from c900. IBtw, it is even possible to rebrand and upgrade from Lx9 to AL10c00 Chinese Oreo (it comes with ALL languages), and to get it fully working (but some patches must be applied) - eg, I'm writing from my P9 with such Chinese Oreo (and rooted by Magisk)
Regarding to L09/L19 trays - yes, they are as on your pictures. You can put L19 tray into L09 and vice versa but on L09 you cannot (I was trying by rebranding L09 to L19) make it work to recognize that second SIM (from the hybrid slot)
So it seems that differences between L09 and L19 are not only in software but also in hardware (and not only in the tray) - L09 has NFC and L19 does not have, people tried also rebranding L19 to L09 but still they could not switch the NFC on
That is, for those who don't use two SIMs neither NFC - they can rebrand from L09 to L19 or vice versa and everything will work fine, with no 'visible' differences in the firmware
PS: You see now why unlocking Bootloader, rebranding, rooting, etc - all require to have Bootloader and FRP unlocked
Click to expand...
Click to collapse
zgfg said:
Cope92 said:
No problem, after upgrading to Nougat everything will work
Im pretty sure that if you buy Huawei (if they still sell P9) from your mobile provider, it will for sure come with Nougat
Btw, there is something strange with that c900 cust, if you dig to old XDA posts, you will see that c900 was popular few years ago, people thought it was kind of "generic' intermational cust and many rebranded to c900 from regional custs - but later rebranded back (usually to c432 European or some other like Mediterranean or Latin America ) because all other custs were upgraded to Nougat except that c900. Not sure if Huawei was ever selling phones with c900, or it was only used for the phones bought in China (cheaper) and rebranded then for international market (all languages, getting rid of Chinese bloatware)
Nevertheless, don't worry and escape from c900. IBtw, it is even possible to rebrand and upgrade from Lx9 to AL10c00 Chinese Oreo (it comes with ALL languages), and to get it fully working (but some patches must be applied) - eg, I'm writing from my P9 with such Chinese Oreo (and rooted by Magisk)
Regarding to L09/L19 trays - yes, they are as on your pictures. You can put L19 tray into L09 and vice versa but on L09 you cannot (I was trying by rebranding L09 to L19) make it work to recognize that second SIM (from the hybrid slot)
So it seems that differences between L09 and L19 are not only in software but also in hardware (and not only in the tray) - L09 has NFC and L19 does not have, people tried also rebranding L19 to L09 but still they could not switch the NFC on
That is, for those who don't use two SIMs neither NFC - they can rebrand from L09 to L19 or vice versa and everything will work fine, with no 'visible' differences in the firmware
PS: You see now why unlocking Bootloader, rebranding, rooting, etc - all require to have Bootloader and FRP unlocked
Click to expand...
Click to collapse
So u wanna say i bought fake huawei p9 i dont understand? Im starting first part to do then next so i will tell you what have i done ( im interested in oreo one but first i wanna try to unbrick this system ), P.S in the first guide you give me i cant extract anything on SD card sinc i cant use anything exept ADB fastboot?
Click to expand...
Click to collapse
Cope92 said:
zgfg said:
So u wanna say i bought fake huawei p9 i dont understand? Im starting first part to do then next so i will tell you what have i done ( im interested in oreo one but first i wanna try to unbrick this system ), P.S in the first guide you give me i cant extract anything on SD card sinc i cant use anything exept ADB fastboot?
Click to expand...
Click to collapse
I never said that you bought 'fake' P9, I just said that c900 cust is dead locked to b166 (although there wad also c900b182 but seems that Huawei didn't even push OTA update to that)
And I said that by the procedure, if your bricked phone will allow, you should first get c900b182 with probably already unbricked phone (hope it will boot)
You can pull SD card out and prepare the required DLOAD folder on the PC or another device
If things won't work you can go for DC Unlocker, credits 15 Euros (TG, I never needed to use but if you search on XDA you will find happy users whom the tool unbricked their phone when nothing else worked or they didn't know/didn't want trying on their own:
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Click to expand...
Click to collapse
zgfg said:
Cope92 said:
I never said that you bought 'fake' P9, I just said that c900 cust is dead locked to b166 (although there is also c900b182 but seems that Huawei didn't even push OTA update to that
And I said that by the procedure, if your bricked phone will allow), you should first get c900b182 with probably already unbricked phone (hope it will boot)
You can pull SD card out and prepare the required DLOAD folder on the PC or another device
If things won't work you can go for DC Unlocker, credits 15 Euros (TG, I never needed to use but if you search on XDA you will find happy users whom the tool unbricked their phone when nothing else worked or the didn't know/didn't want trying on their own
Click to expand...
Click to collapse
Oh well where can i find c900b182 ? what do i need to do? i need to find c900b182 rom and download it and Install it with Power and Vol + - combo ? and then i need to do Like you said Guide 1 and then guide 2 ?
Click to expand...
Click to collapse
zgfg said:
Cope92 said:
I never said that you bought 'fake' P9, I just said that c900 cust is dead locked to b166 (although there wad also c900b182 but seems that Huawei didn't even push OTA update to that)
And I said that by the procedure, if your bricked phone will allow, you should first get c900b182 with probably already unbricked phone (hope it will boot)
You can pull SD card out and prepare the required DLOAD folder on the PC or another device
If things won't work you can go for DC Unlocker, credits 15 Euros (TG, I never needed to use but if you search on XDA you will find happy users whom the tool unbricked their phone when nothing else worked or they didn't know/didn't want trying on their own:
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Click to expand...
Click to collapse
Im sorry but from all the guides etc.. im confused what to do.. :/ I can only Use ADB fastboot and from guide 1 Power + volume - Volume combo but i cant extract rom to Dload folder so i assume that option dosent work...... So if you know option from Fastboot that i can use or anything i can do you can write the guide sinc im rly confused right now :/... Well Dc Unlocker 15 euros ( no problem if i cant do anything ) but i wanna try this is challenge and fun for me i just dont know from where to start :S and im in fear can i brick the device even more haha
Click to expand...
Click to collapse
Cope92 said:
zgfg said:
Im sorry but from all the guides etc.. im confused what to do.. :/ I can only Use ADB fastboot and from guide 1 Power + volume - Volume combo but i cant extract rom to Dload folder so i assume that option dosent work...... So if you know option from Fastboot that i can use or anything i can do you can write the guide sinc im rly confused right now :/... Well Dc Unlocker 15 euros ( no problem if i cant do anything ) but i wanna try this is challenge and fun for me i just dont know from where to start :S and im in fear can i brick the device even more haha
Click to expand...
Click to collapse
In post #12, part (i) there is a link to guide that installs c900b300 (sorry, not c900b182)
Again, I said that you prepare DLOAD content on the extetnal SD card by pulling it out of the phone and putting to some adapter and to PC or to another Android device
I wish you good luck. If you don't want or can't do as instructed, maybe better you go for DC Unlixker, you pay them and they have to provide you service, answers, etc
Click to expand...
Click to collapse
zgfg said:
Cope92 said:
In post #12, part (i) there is a link to guide that installs c900b300 (sorry, not c900b182)
Again, I said that you prepare DLOAD content on the extetnal SD card by pulling it out of the phone and putting to some adapter and to PC or to another Android device
I wish you good luck. If you don't want or can't do as instructed, maybe better you go for DC Unlixker, you pay them and they have to provide you service, answers, etc
Click to expand...
Click to collapse
Oh okay i will try it thanks a lot
Click to expand...
Click to collapse

Categories

Resources