skin for lenovo yoga book - Lenovo Yoga Book Accessories

Hi all
Does anyone know where I can get a protective skin for the yoga book, it's such a slim device seems a shame to add load of bulk with a protective case but suspect it will scratch up a bit when i'm out and about. I'm based in the UK and so far can't seem to find anyone who makes them yet.
Many thanks
Regards
Andy

Hi Andy,
i also would like to have a skin for my yoga book. I already sent a request to dbrand ( https://dbrand.com/ ) for creating one.
They said if they get enough requests they will start prototyping.
So i would suggest everone who wants a skin for his yoga book should make a request at https://dbrand.com/contact
Best Regards,
Christian

There are cheap skins at Amazon and eBay. I really want one that looks like a note book. But the only have that style for other Yoga devices. I have used my YogaBook at work and people were quite impressed by it. Until I unfolded it from tablet mode to laptop mode and the keyboard lit up, everyone thought it was just a tablet because it was so thin. Until I opened it from close, people thought it was just a paper notepad.
Since it is slippery on table top, I experimented with with taping silicone sheets of various thickness at the bottom. That make the thing stick to table when you type. But since the hinge is made such that when in tablet mode the two sides close almost without a gap. Even a silicone sheet 1/32" thick is too thick to keep the two sides from folding into a tablet because the hinge end will pinch on it. I can stack up to at most 4 sheets of prints paper before it prevents the Book from folding into a tablet. So the skin must be very thin. I have DBrand skin for my XPS 13 9350. It is quite thick. Hope they acquire an actual device to test out fitment.

Free custom skin for your Yoga Book
...

Here's my Book's skin
Got my skin from Amazon. Unfortunately I am new here and am not allowed to post the link yet. Only posting picktures.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ciganskovic said:
Hi Andy,
i also would like to have a skin for my yoga book. I already sent a request to dbrand for creating one.
They said if they get enough requests they will start prototyping.
So i would suggest everone who wants a skin for his yoga book should make a request.
Best Regards,
Christian
Click to expand...
Click to collapse
Yep, I requested a skin for the Yoga Book and will now wait until they release it.. and also see how expensive it would be...

i bought a nomal skin made for laptop in the right size on ebay and then just used a pen knife to make the cutouts needed to make it fit proper and it works like a charm.

emmastone123 said:
Medstar Rehab is a local business established in the year 1999, by a group of physiotherapists. We provide various types of physical therapy services. For More Click Here.
Click to expand...
Click to collapse
uhm....

Related

Silicone Skin & Pouch - together.

Hello,
I thought I'd share my silicone skin and case combination with you, both from good old eBay...
Silicone Skin (& screen protector): eBay link - £3
For that price, it was worth a gamble and it paid off! If looks nice, fits perfectly and is nice to hold. The screen protector is a bonus and it also fits perfectly. (this might me UK only shipping though)
Pouch: eBay link - £2.50
Supposedly original HTC, but I wouldn't know... It's like the HTC supplied pouch that came with my last phone, HD2. The above silicone skin fitted on my Incredible S fits inside of this pouch, and it's a really good fit like it was built for it! No problem getting it out to answer a call. I paid £2.50 with free shipping on a 'buy it now'.
Over all, for around £5.50 all-in, I'm happy with this combination - my phone is nicely protected and isn't too bulky in my pocket.
That case looks really nice, could you post some photos of it?
thanks, ill be looking into the case
Someone wanted photos...?
As requested, I just took some pics for you.
(I've just had a bag of crisps so I had to polish my phone a bit to get rid of greasy finger prints - I hope you all appreciate my effort!!)
I should have put these up in my original post really, but here you go...
(click on them to make them bigger)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
By the way, the silicone case was delivered in a couple of days after placing the order (UK Royal Mail).
The Pouch came from Asia somewhere, but it got here safely and took around 10 days.
do you find it hard to press down on the power button?
+1 on the question about power buttons but also about the volume buttons - are they still easily pressed??
i was also wondering what kind of material is it?
is it soft stretchy silicone that grips really well? because i hate it when those stick in my pocket, or is it more like the inc. s's original case finish?? kind of hard / rubbery?
thanks
The power button and the volume buttons push OK. There are moulded 'buttons' in the case and pressing them activates the buttons just fine. I've never had a problem with them not working.
Regarding the material it is made from, its not a really rubbery/sticky material, so it shouldn't gather pocket fluff! Its actually quite smooth and rigid (the material), flexible still, but holds the shape of the phone nicely. You can just about stretch it over the phone to get it on.
Sent from my HTC Incredible S using XDA Premium App

[REVIEW][VIDEO][Poetic_Element_Case][Thin]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I purchased this case for £6.95 form AMazon yesterday and it came today. I wanted a thin case that offers as much protection as it could, and I believe this is that case. THis case is listed as $35 on thier website, I just wanted to say I dont think that it is worth that much.
The case has a hard, plastic structure with a layer of Brushed Aluminum on the back. This gives it a cool touch and a very nice texture. All cutouts are very well aligned and I have had no issues with audio or pressing the volume or power buttons. The pogo pins are also exposed which is nice as this is the only case I know where they have allowed them to be open. Overall the case is very good very slim and offers quite a lot of protection.
THe negatives come in the way of the design though. The huge poetic logo on the back of the case (see images) may put some people off as well as the bottom and top silver plastic being exposed on the device. Also the case is not that grippy to hold. Meaning it is very slippy to hold and may fall out of your hand.
Great case at a great price.
BUY: http://www.amazon.co.uk/gp/product/B008NMCPXW/ref=oh_details_o00_s00_i00
Here's my video:
Great review man... does it provide any protection to the front? What I mean is if you put the nexus face down does the glass touch the surface at all?
Thanks for putting up the review. That has got to be one ugly case though. I want my branding to be mostly invisible. That one screams LOOK AT ME!!!!! :silly:
Just recently got my nexus and I've been looking for a new case. I just recently dropped my nexus on concrete and the top right corner the I guess bezel or the silver gray material came off. Am wonder ok by if this case would provide decent protection against such a fall
Sent from my Nexus 7 using xda app-developers app
phantasybm said:
Great review man... does it provide any protection to the front? What I mean is if you put the nexus face down does the glass touch the surface at all?
Click to expand...
Click to collapse
Yea there is a bit of a lip to put the N7 face down on the table, its very minimal
ctbaker said:
Thanks for putting up the review. That has got to be one ugly case though. I want my branding to be mostly invisible. That one screams LOOK AT ME!!!!! :silly:
Click to expand...
Click to collapse
Lol Im not a fan of the branding, but the case feels really nice in the hand

[REVIEW] GMYLE (TM) Black PU Leather Cross Pattern Slim Sleeve

As someone that isn't a fan of cases for devices and prefers the naked feel of the device but still wants protection for their tablet I went looking for a sleeve that I thought looked good and would give me some protection. So as a result, I ordered this sleeve on the 22nd of September and received it today (October 2nd). And I must say it is nice quality. While it is not real looking leather (one that you would find on a jacket or sofa), the quality of the sleeve is still nice and it doesn't look cheap at all. If anything, I would just classify it as a nice quality looking and feeling felt. I also did some tests by bending it and twisting it and there was no cracking of the material.
As you may or not be able to see from the picture below the only part of the tablet that is visible is the centre part of the tablet where the camera is located but that is just for convience to slide in and pull out the tablet.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I would upload more pictures but I think the pictures up on amazon do showcase it quite well and accurately but I thought that a picture of the quality of the material deserved a more closely looked at picture.
Here is the url for the sleeve, although if you were to look up the product on ebay you would find it for about half the price. I only got it from amazon because I had a gift card that I wanted to use and since its free money then why not right?
URL:
http://www.amazon.ca/gp/product/B008O0XSRA/ref=oh_details_o01_s00_i00
http://www.ebay.ca/itm/Black-Leathe...ablet_eReader_Accessories&hash=item43b40c4708
So all in all I really do like this sleeve and I apologize on the crappy review (it isnt my speciality) but I just thought it be something that people might be interested as an alternative to getting a case for their tablet. If there is something that I didnt cover that you would like to know about more then ask away and I should be able to answer it for you.
Thanks. I have had this one on my shortlist as I want a simple sleeve. It doesn't have any kind of a sleep magnet in it though does it? Do you find any problems with the device turning on while in the sleeve?
I can't see that being a problem, with the recessed button and the fairly stiff looking material of the case it's not likely to happen.
haloeight said:
Thanks. I have had this one on my shortlist as I want a simple sleeve. It doesn't have any kind of a sleep magnet in it though does it? Do you find any problems with the device turning on while in the sleeve?
Click to expand...
Click to collapse
No there isnt any magnets in the sleeve. And no it doesnt turn on accidentally while in it. Although after a bit of testing of it, it is possible to press the power button through the sleeve. But I was trying to do it intentionally just now. If you are to just carry it around normally then I wouldnt suspect the power button being turned on by accident since the material is somewhat stiff.
Thanks. What's the inside like? The pictures look like smooth tan PU but wondering if it any kind of a softer or microfiber material.
haloeight said:
Thanks. What's the inside like? The pictures look like smooth tan PU but wondering if it any kind of a softer or microfiber material.
Click to expand...
Click to collapse
Here is a picture attached. The material is white inside if the picture doesn't look white to you. And it feels a little more coarser and textured than a microfibre cloth I'm guessing to help from the tablet not slide out as easily. But with that said it is still smooth and won't scratch the screen if it doesn't have a screen protector on it.
Sent from my Galaxy Nexus using xda app-developers app
I wish it had a magnet, but I impulsely bought this
for those wishing to buy off amazon.com (US) here's the ASIN: B008V9SJVO

This would be the perfect "thin case".

I have a Samsung flip case which I love but the lack of drop protection is disconcerting. What would be awesome would be if someone made little clear gel "corner bumpers" that you could just fit over each corner and not all the way around the phone. They could be small and thin with a little stickiness on the inside to hold them on. It would be the ultimate "thin" case as it only protected the corners (the trouble spots).
Does such a thing exist?
Sent from my SPH-L900 using Tapatalk 2
Sugru -Different colors, but no clear.
https://sugru.com/
or make your own and don't put any coloring in it. I think it will be as clear as silicone gel.
http://www.instructables.com/id/How-To-Make-Your-Own-Sugru-Substitute/#step1
Lord Sekhmet said:
Sugru -Different colors, but no clear.
https://sugru.com/
or make your own and don't put any coloring in it. I think it will be as clear as silicone gel.
http://www.instructables.com/id/How-To-Make-Your-Own-Sugru-Substitute/#step1
Click to expand...
Click to collapse
Thanks but I am looking for something premade and clear. That would look pretty ghetto.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
mine doesn't look perfect, but it's only as ghetto as your art skills. get someone else to do it for you. It's not just silicone so not sticky after it sets.
It's the best drop protection you'll get on anything thin. plastic just transfers energy to the screen, rubber on the sides just adds bulk and there doesn't need to be anything on the back in most cases.
In reality though, most cases look ghetto compared to the gorgeous phones we get new and then cover up. My brother's iPhone bumpers are 5th or 6th generation Sugru, so he's getting pretty good at shaping them and they are only raised about 1/16" on the ends but a bit more for the face.
thehumble1 said:
mine doesn't look perfect, but it's only as ghetto as your art skills. get someone else to do it for you. It's not just silicone so not sticky after it sets.
It's the best drop protection you'll get on anything thin. plastic just transfers energy to the screen, rubber on the sides just adds bulk and there doesn't need to be anything on the back in most cases.
In reality though, most cases look ghetto compared to the gorgeous phones we get new and then cover up. My brother's iPhone bumpers are 5th or 6th generation Sugru, so he's getting pretty good at shaping them and they are only raised about 1/16" on the ends but a bit more for the face.
Click to expand...
Click to collapse
Wouldn't those just fall off if you dropped it on one of those corners? What holds that stuff in place, can it be removed without damage to the device? Residue, adhesive?
Sent from my Note 2
Im only posting because I am interested in where this thread goes, and threads are easier to find if you post in them.
http://tpu-cases.com/index.php?main_page=product_info&cPath=42_83&products_id=326
i bought this case, it's great. very thin and fair amount of protection.

Jeans pocket / sleeve for G4

Here's a bit of a left-field suggestion among all the rubber backs and bumper cases: why not get a sleeve case instead?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I found this seller on etsy a while ago. They make pouches for any number of devices using jeans fabric on the outside and coloured cotton on the inside. What I like about them: they are very minimalist and low-key. Perfect for protecting your G4 while traveling or when you want to toss it into a bag but you're worried it might get pushed around or scratched by sharp objects such as your house keys.
In my opinion a perfect solution for those looking to protect the phone when it's not in use but who don't want to mess up the design by putting a rubber or bumper case around it. Of course, it won't help you if it slips out of your hand and hits the concrete while you're using it.. those are the trade-offs.
I have a similar pouch for my Nexus 7 (2nd gen) and it's been serving me well for almost 2 years now. Highly recommended.
I ordered one for my G4 yesterday (the phone arrived two days ago). I'll post an update once I receive the sleeve case.
Begoos Sleeves for LG G4
.
Received the sleeve today
Sent from my LG-H815
caffeinated.pants said:
Here's a bit of a left-field suggestion among all the rubber backs and bumper cases: why not get a sleeve case instead?
Click to expand...
Click to collapse
It's pretty simple actually...
1) a sleeve doesn't protect against drops
2) you can't use your phone without taking it out of the sleeve.
Sent from my LG-H811 using Tapatalk
I made similar points in my initial post —
It won't be of much use to you if you feel you need protection at all times.
I intend to keep it in the sleeve when not in use and while traveling. I'm going to see if that works for me as well as I hope it does — it's been a great combination with the Nexus 7.
Sent from my LG-H815
TechMatte Inc said:
Do you just hang this like a pouch over your shoulder? Could you please explain how this is used-- or take a picture of it being used?
Click to expand...
Click to collapse
See the pictures I posted above - it's like a jeans pocket that you slide the phone into. Mine has an extra pocket in the front that can carry a credit card or something similar. Just slide your phone in and it's protected from falls or during travel.
I prefer to use my phone 'naked' and I use instant messaging much more than actual phone calls, so this arrangement works very well for me. Hope this helps.

Categories

Resources