Clean install for Global Stable Rom - Xiaomi Mi 5 Questions & Answers

Hi guys,
I'm trying to get my head around everything, in order to get it onto a cleanly installed Global stable rom. It’s currently running an older version of Global stable rom, on a locked bootloader. I wish to make sure that the installation is totally clean, so I’ve figured that one of my best options would be to update it using the fastboot method.
As far as I can gather, this is that I should first unlock the bootloader using this guide here:
http://en.miui.com/thread-267361-1-1.html
After I’ve done that, I can update using “method 3”, the fastboot method, as described here:
http://en.miui.com/thread-307744-1-1.html
I have a few questions here, before I start the process. Any help would be appreciated:
In order to unlock the bootloader, I gather I need to be on China Dev rom (not Global, and not China Stable). Do I simply use the updater app and run a downloaded ROM from the website to get it onto China Dev?
Do I need to be on China Dev to even start the bootloader unlocking process? Can I leave it on what I currently have (Global stable) until I get the unlock codes?
When I register for a Mi account and request for an unlock, does the phone number associated need to be in the Mi5 I'm unlocking? I.e., do I need to keep the sim card in the Mi5, while I wait for the unlock codes etc. Until the phone is cleanly installed, I'll be using a different phone, so the SMS codes will be received on a different handset.
Do I need to install all the drivers, (Quallcomm etc.), noted in this guide here? http://en.miui.com/thread-299790-1-1.html The other guide above only specifically mentions to install the Mi Flash Tool.
Lastly, am I going about this the right way, or is there perhaps an easier way of doing things to get a clean install? Note, I don't have access to a deep flash cable.
Thanks in advance.

Hello,
Will try to answer some of your questions based on my experience.
I unlocked the bootloader from global stable rom. It is possible to do that from global and china rom. No need to change roms and definitely not needed to be on developer roms. I am not sure if it works on eu rom as it is unofficial.
You need to apply for phone unlock over xiaomi webpage while you are logged in to your xiaomi account. If you havent created a Xiaomi account it might be easier to make one over the phone as it uses your phone number and connects it all to your account.
Then log in on your pc and apply for the bootloader unlock. It takes about 10 days for them to process your request and i didn't even receive the sms that i can unlock my phone. After about 15 days have passed since i applied i just went along the instructions on the xiaomi unlock webpage and just unlocked it with some xiaomi pc application.
It was a fairly straightforward experience. I can't remember was it mi flash or it was something specifically for unlocking the bootloader, anyway it is on the xiaomi unlock webpage and on miui forum.
After you are through the process you can go to developer options in settings and look for mi unlock status it should say unlocked if you are successful. (if you haven't switched the developers options on already tap 6-7 times on the miui version in about phone and the developers options menu will appear in additional settings menu)

Related

Bootloader locked by Xiaomi now, need to fill a form in Chinese and wait to unlock it

Executive summary: If you flash China Developer ROM 6.1.14 or newer, your bootloader will be locked and the root access gone.
Before you upgrade to China Developer ROM 6.1.14 or any later version, make sure you understand the implications. Turns out Xiaomi has decided to lock the bootloader and to unlock it, you'll not only need to wipe your data but file an application with them and wait for their permission. So far, the application is in Chinese only:
View attachment 3610722
More details on en.miui.com in this thread:
Unlocking tool supported devices:
Redmi Note 3, Mi 4c, Mi Note Pro
Note: Forum user groups higher than Diamond member (including Diamond member), and all special teams have been added to unlocking bootloader whitelist. Your unlocking applications will be approved faster than other users.
Unlocking Bootloader Procedure:
1. Download zip file (recovery file) of China developer ROM for your device, put it into phone storage. Go to Updater app, press the three dot on upper right corner, and select 'Choose update package'. Choose the zip file you just put in phone storage. The update will wipe all user data, please make backup beforehand.
2. Log into the Mi account which has acquired unlocking permission on your device
3. Turn off your device, press the Power button and Volume - button at the same time to enter bootloader mode
4. Log into the unlocking tool on PC with the same Mi account. Connect the device with the PC using USB cable
5. Press 'Unlock'. The unlocking process will complete in about 10 seconds
After unlocking bootloader, users will be able to flash fastboot ROMs and custom ROMs. The unlocked device will be marked in the official service end. Users could lock bootloader again by flashing official MIUI ROMs. (This will need to use fastboot oem lock. Please note to flash offcial MIUI ROMs, otherwise your system won't be able to start)
Notes:
1. After getting unlocking permission for a Mi account, users can unlock the verified device immediately. One Mi account could only unlock one device within 30 days
2. Users could require for unlocking permission in this site: http://www.miui.com/unlock/
3. If a prompt says that the current account is not logged into a connected device. Please log in with this account on the device that needs to be unlocked
4. If your device is encrypted, unlocking bootloader will wipe all user data. Please perform a backup beforehand
Unlocking Tool Download:
(Only Chinese supported for now. We're still working on the English version, please stay tuned.)
Click to expand...
Click to collapse
In other news, the root access is also gone by default and will need to be re-enabled with an online check every time you flash a ROM via recovery or fastboot (non-OTA). Details here.
Comment: It all seems a bit ridiculous., especially the online application part.
Please help and share :
https://www.change.org/p/xiaomi-mi-...source=share_for_starters&utm_medium=copyLink
Together we can change that. If unlock bootloader was easy and possible for everyone then problem wasn't exist.
What about anything from xiaomi.eu will that lock the bootloader if I flash an update through twrp?
ethanscooter said:
What about anything from xiaomi.eu will that lock the bootloader if I flash an update through twrp?
Click to expand...
Click to collapse
I stayed with version 5.12.31 thus far so I don't know first-hand but according to them, no.
Just avoid the official firmware, including doing anything the Updater app asks you to. I think the app cannot be removed once installed but I posted here how to remove the notification.
Found this on french MIUI works great no locked bootloader.
http://miui-france.fr/TEMPLATES_ROMS/V7/minotepro.php
Flashed via TWRP all still intact.
Thanks to messi89
jazz452 said:
Found this on french MIUI works great no locked bootloader.
http://miui-france.fr/TEMPLATES_ROMS/V7/minotepro.php
Flashed via TWRP all still intact.
Thanks to messi89
Click to expand...
Click to collapse
hello bro,
can you give me more details about the update log?
Thanks
Had to join for change log, not found 1 problem yet.
Would go as far as to say, probably the best update since I had the mi note pro
Aqq123 said:
Executive summary: If you flash China Developer ROM 6.1.14 or newer, your bootloader will be locked and the root access gone.
Before you upgrade to China Developer ROM 6.1.14 or any later version, make sure you understand the implications. Turns out Xiaomi has decided to lock the bootloader and to unlock it, you'll not only need to wipe your data but file an application with them and wait for their permission. So far, the application is in Chinese only:
View attachment 3610722
More details on en.miui.com in this thread:
In other news, the root access is also gone by default and will need to be re-enabled with an online check every time you flash a ROM via recovery or fastboot (non-OTA). Details here.
Comment: It all seems a bit ridiculous., especially the online application part.
Click to expand...
Click to collapse
It's totally ridiculous and the unlocking procedure is taking people a lot of time to get an answer. Very frustrating.
ghfatw said:
It's totally ridiculous and the unlocking procedure is taking people a lot of time to get an answer. Very frustrating.
Click to expand...
Click to collapse
For an even bigger snafu, many people ended up with a boot loop after the first OTA update that also locked the bootloader, and although more than two weeks have passed there's still no way to recover from it as of yet.
This might help those with brick. No it won't ignore me.
I have received Mi Note Pro 64G few days ago
My phone is running Chinese stock rom 7.1.5 without root. I tried to install TWRP but unsuccessful.
I read some Miui forum that update rom to dev rom 6.1.28 would have pre-root but when I update to 6.1.28 via Mi-PCSuite, I still not able to install TWRP
So I read XDA forum that Mi Note Pro have to register to get unlocking bootloader code, but I can not complete the form to get unlock code
Please someone here can help me something to install a proper English rom from en.miui with google service as normal Android phone??
Thank you
Update: I managed to access the form of unlocking code request
Hope Xiaomi will process soon
I got my Mi Note Pro granted open, but i found out is was never locked. I am on Cyanogenmod at the moment. The MIUI thing was too IPhone for me (coming from an iPhone)
http://forum.xda-developers.com/mi-note-pro/help/how-to-unlock-mi-note-pro-100-t3336677
---------- Post added at 08:23 PM ---------- Previous post was at 08:22 PM ----------
denngaxl said:
I got my Mi Note Pro granted open, but i found out is was never locked. I am on Cyanogenmod at the moment. The MIUI thing was too IPhone for me (coming from an iPhone)
Click to expand...
Click to collapse
goog choice
---------- Post added at 08:28 PM ---------- Previous post was at 08:23 PM ----------
vodanhdaisu said:
I have received Mi Note Pro 64G few days ago
My phone is running Chinese stock rom 7.1.5 without root. I tried to install TWRP but unsuccessful.
I read some Miui forum that update rom to dev rom 6.1.28 would have pre-root but when I update to 6.1.28 via Mi-PCSuite, I still not able to install TWRP
So I read XDA forum that Mi Note Pro have to register to get unlocking bootloader code, but I can not complete the form to get unlock code
Please someone here can help me something to install a proper English rom from en.miui with google service as normal Android phone??
Thank you
Click to expand...
Click to collapse
Please install this version by Miflash ---> mega:///#!tcAEkKCa!_7ft1wzFRUgwryxeeNiZQLuyKcTqSZu4wWcfcWPSM18
and the install Flahify and install TWRP by flashify.
So this works to unlock bootlaoder? just read same on different website. Maybe needs seperate thread so people notice it.
http://xiaomi.eu/community/threads/how-to-unlock-bootloader-mi-note-pro-100-works.30557/
not tried it mine isn't locked.
jazz452 said:
So this works to unlock bootlaoder? just read same on different website. Maybe needs seperate thread so people notice it.
http://xiaomi.eu/community/threads/how-to-unlock-bootloader-mi-note-pro-100-works.30557/
not tried it mine isn't locked.
Click to expand...
Click to collapse
That guide works very well and is the same posted on miui.com
I was on locked botloader and now I'm on multilanguage with twrp and root with unlocked bootloader.
Works very well with mi note pro in bootloop too
哈哈???:sly:
crisgen said:
That guide works very well and is the same posted on miui.com
I was on locked botloader and now I'm on multilanguage with twrp and root with unlocked bootloader.
Works very well with mi note pro in bootloop too
Click to expand...
Click to collapse
Its work guys, just try ---> http://forum.xda-developers.com/mi-note-pro/help/how-to-unlock-mi-note-pro-100-t3336677
all the new mi note pro now comes with locked bootloader. one has to apply for unlock code at en.miui.com/unlock . also the funny part is that it asks for a "reason" for unlocking and if you don't give a legit one, they might reject your request. once rejected, you will have to wait 90 days for the next request. totally ridiculous but unavoidable for note pro owners.

How to install global ROM without unlocking bootloader

Hello. I just got a Xiaomi mi5. I live in the United States. It has the China ROM. I wanted to install the global ROM, but it seems that you need to unlock the bootloader to do that. To unlock the bootloader, you need to send an application to Xiaomi. It has version 7. Is there a way to install the global version of MIUI 8 without unlocking the bootloader? So far, I have downloaded the ROM file from this website. http://en.miui.com/download-299.html. I followed the instructions to copy it onto the phone, go into the updater app, choose the update package, and select the ROM file. It gives me an error saying it cant verify the ROM. I tried using the MiPhone manager. It did not work either. I then read to use the Chinese version of the program, and followed which buttons to press. After selecting the ROM, it gave me some error in Chinese. I also read about a Mi flash tool, but it seems you need to use a special engineering cable or adapter. What do I do? Is sending the application to Xiaomi the only option I have? What do I do?
Just unlock bootloader, why not?
marcoly said:
Just unlock bootloader, why not?
Click to expand...
Click to collapse
Perhaps, for security reasons?
If i remember correctly you cannot go from developer to stable ROM if the language is different. Do you use the developer or stable rom for global? And what version is installed now?
You can check by going to settings > about phone.
myPhoneBroke said:
Perhaps, for security reasons?
If i remember correctly you cannot go from developer to stable ROM if the language is different. Do you use the developer or stable rom for global? And what version is installed now?
You can check by going to settings > about phone.
Click to expand...
Click to collapse
Why you can't just go for Xiaomi.eu ROMs? Install China Dev, unlock bootloader and install their ROM (6.4.21 has even TWRP included). Their ROM is free from Chinese crap (I don't know about global, but I don't really need Xiaomi apps or MiPay).
Without unlocking bootloader you will need engineering cable.

What to do first when I receive the phone?

Hey everyone,
I was just wondering what I need to do when i receive the device. I am in Australia and the phone might be the Chinese model.
So is there anything I have to do with the phone to make it usable as I've heard you need to flash on the global ROM.
How do I properly set up my device for use?
Thanks
MrMoistWalrus said:
Hey everyone,
I was just wondering what I need to do when i receive the device. I am in Australia and the phone might be the Chinese model.
So is there anything I have to do with the phone to make it usable as I've heard you need to flash on the global ROM.
How do I properly set up my device for use?
Thanks
Click to expand...
Click to collapse
Not easy.To flash the global version miui,you need to unblock your boolloader, then download the global package,and flash it with the miflash.But to unlock the bootloader,you need a mi account and make a Application.
MrMoistWalrus said:
Hey everyone,
I was just wondering what I need to do when i receive the device. I am in Australia and the phone might be the Chinese model.
So is there anything I have to do with the phone to make it usable as I've heard you need to flash on the global ROM.
How do I properly set up my device for use?
Thanks
Click to expand...
Click to collapse
If you bought from a chinese-based online store, most likely your device has a fake ROM. To get rid of that ROM, you need to unlock bootloader. No matter if you want to flash an official ROM or unofficial xiaomi.eu. You can try to change ROM with MIUI Updater app, but most probably it will not work from a fake ROM.
To unlock bootloader you need at least a couple of things: a xiaomi account you can create here Mi Account -> account.xiaomi.com
After you create your MI account you need to request unlock here MI Unlock en.miui.com/unlock and wait several days to be approved for unlocking. In my case it took 4 or 5 days before I received an SMS of approval.
Then download MI Unlock app (Windows) and search a manual for unlocking device (you need to activate developer options).
In order to unlock bootloader you need a Chinese ROM (stable or dev) but If I'm not wrong all 'fake' devices come with a chinese-based ROM, otherwise wouldn't be a fake ROM?
After you achieve unlocking you can flash any ROM, Global or China, unofficial like xiaomi.eu, etc..
Flash global rom without unlocking bootloader
There is a way to flash global rom without unlocking bootloader using special USB cable that you can make yourself if you still want to do so i'll gladly show you how I did with my phone.
If you are tired and irked by MIUI, I would strongly recommend you to quickly apply for Bootloader unlocking permission on the official Miui site. Afterwards, unlock your bootloader and install official TWRP recovery and a ROM of your choice such as CM14.1. That way, you will be able to experience the true "openess" and magic of Android!
You can install CyanogenMod ROM, but unfortunately you will get no updates, since project has been discontinued on Dec 31 . Their successor is http://lineageos.org/ but there's nothing on their web yet.
Do create a MiAccount.. and do remember your security pattern... what ever you intend to do next do those two things
no need to unlock bootloader.
Xiaomi flash ROM came with 2 method.
you can flash not only from fastboot mode ( bootloader mode ) but also from edl mode ( QDloader 9008 mode ).
- fastboot method need to unlock bootloader.
- EDL method not need to unlock bootloader .
EDL method even can unlock bootloader with unofficial method

ReUnlocking converted A2 (6X)

I have a converted A2 (+ARB 4), with UNLOCKED bootloader.
I read somewhere if you relock the BL , you will not able to UNLOCK it again ever after! (is it true?)
and other thing: If it try the MIUI BL Unlocker Official Application to unlock my device (even when it is still unlocked) what could be happen? (I've just followed the steps till the warning msg: "Unlocking Bootloader will erase user Data" ). (I read somewhere else that for unlocking miui devices you need to submit the request and you need to wait for a long time to get the code, and I was going to get the code for a case of necessity in future.)
I need to know how far I can play with these stuffs on my devices and left a practical way to recover a Bricked phone. ( I consider even TEST POINT as a practical option [tried once and it is damn easy and fun ] )
Im sorry bro but the actual model and serial code of your phone is a A2.And that means you probably wont unlock it it will give a hardware error.But pls try it and report.Dont worry there will be a fix!!
Tech_jetoncesaj said:
Im sorry bro but the actual model and serial code of your phone is a A2.And that means you probably wont unlock it it will give a hardware error.But pls try it and report.Dont worry there will be a fix!!
Click to expand...
Click to collapse
If it locked again my BL, what would be the solution? I didn't find any.
the mi unlock app requires a mi account with unlock permissions (account! not phone)
if you try to unlock an unlocked a2 you should either get unsuported - it's meant for miui devices - or already unlocked.
The app first checks the account and passes to further steps, then recognizes my phone, and warns me about wiping Data. ( At this step I declined and closed the app)
Your hypothesis seems correct, but if in any circumstances I would be left with relocked converted A2 , ist there any chance to reunlock it again?
that's why the test point method exists, for locked that you try to fastboot flash
I tried, and it just says: Device Unlocked, no need to reunlock again!
So now is it safe to lock my bootloader and try the app again?
if you lock the bootloader via fastboot commands it wont boot any more.
only way to safely lock is with miflash and you cannot miflash a wayne miui on a converted a2. it will see that it's the jasmine.
if you miflash the a2 fastboot rom it will relock ok - if the flashing works...might not cuz of the arb - but you wont be on miui any more.
what are you trying to do anyway?
i think what you dont understand is the unlock on miui and android one are the same end result but different steps. for miui you godda use the mi unlock, for and1 its just the dev options switch
laviniu_c said:
if you lock the bootloader via fastboot commands it wont boot any more.
Click to expand...
Click to collapse
So if I run the command and re-lock it by Fastboot, how can I re-unlock it again?
laviniu_c said:
only way to safely lock is with miflash and you cannot miflash a wayne miui on a converted a2. it will see that it's the jasmine.
if you miflash the a2 fastboot rom it will relock ok - if the flashing works...might not cuz of the arb - but you wont be on miui any more.
Click to expand...
Click to collapse
So do you mean there is no safety way to re-lock a converted A2 which runs MIUI ?
(and If I had a Banking app which needs a Locked BL to work, there will be no chance to run it at all?)
laviniu_c said:
what are you trying to do anyway?
Click to expand...
Click to collapse
As I said I want to know all the aspects of practical ways to deal with my phone, right now I am totally happy with it, but actually the opportunity of dealing with all these technical stuffs convinced me to buy this phone.
laviniu_c said:
i think what you dont understand is the unlock on miui and android one are the same end result but different steps. for miui you godda use the mi unlock, for and1 its just the dev options switch
Click to expand...
Click to collapse
I've heard that some ROMs may re-lock the phone, since then I would like to know if in any circumstances I would be stuck on that situation how can I re-unlock my phone.
any official miui rom that has the firmware folder in it might do it for example, so will bad ports....
try to use the magisk hide options to fix the banking app, add it to the list of apps for which it specifically hides root. add also the google services and make sure you pass the safetynet tests and your device shows as certified in the playstore settings. i think there were some modules to fix the bl check
laviniu_c said:
any official miui rom that has the firmware folder in it might do it for example, so will bad ports....
Click to expand...
Click to collapse
So lets assume it has been happened, what would be the procedure to rescue my phone? since as you said if the BL locked again it will not boot to OS.
laviniu_c said:
try to use the magisk hide options to fix the banking app, add it to the list of apps for which it specifically hides root. add also the google services and make sure you pass the safetynet tests and your device shows as certified in the playstore settings. i think there were some modules to fix the bl check
Click to expand...
Click to collapse
I would'nt like to root the phone, isn't there any other option?
if you lock the bootloader with any kind of non official rom for your phone (i.e. jasmine_sprout) which in your case is android one it wont boot. the end. only way out of that is the edl mode and miflash. that's the basic difference between locked and unlocked, it checks what os it loads and it makes sure the loaded os is the official rom for the phone. converting the a2 means it needs to be unlocked and you load a rom that's a ported miui10 from wayne to jasmine_sprout. if you flash the full rom, that has the locked bootloader from wayne which will fail to start since:
1 - the phone still isnt wayne
2- the rom isnt quite the official one (since it's renamed to work on jasmine)
3 - even if the phone was fully wayne, you dont really want the official mi 6x rom since that's china only. i.e. no google services
the only unknown in all this is the ARB, but edl should ignore that.
somehow i was under the impression you already have magisk (root/hide) up and running on the converted miui 10. yes, there are good miui 10 ports (for example xiaomi.eu) that give you the miui experience on a2 except they will never have the full ota support that the official rom has.
my advice? stick to the stock a2 rom. locked and full stock. the moment you need to start experimenting is when the android one support stops OR if you really want root.
if you wanted miui and you're outside china, mi 6x is still NOT the way to go. cuz it doesnt have an official global rom anyway. i dont get why everyone is jumping through hoops to get unofficial roms installed with stock support available.
laviniu_c said:
if you lock the bootloader with any kind of non official rom for your phone (i.e. jasmine_sprout) which in your case is android one it wont boot. the end. only way out of that is the edl mode and miflash.
Click to expand...
Click to collapse
So please consider these situations:
The phone is A2 converted to 6X &
The BL has been re-locked &
ARB 4 has been triggered
how can I use EDL mode to unlock it?
(I think miflash would not help because the LOCKED BL and the phone is actually A2)
(I think also Fastboot wont be able to unlock it since it is A2 Converted to 6X)
laviniu_c said:
yes, there are good miui 10 ports (for example xiaomi.eu) that give you the miui experience on a2 except they will never have the full ota support that the official rom has.
Click to expand...
Click to collapse
I'm afraid but I didt't get the point, now every week I receive Pie beta updates (besides there are stable versions too) which actually stable enough, almost Bug & Lag Free (it differs Rom to Rom, but believe me it is COOL ) , and by PitchBlack you can use direct update. (I prefer to install it by myself since I LOVE TWRP & its child PB). so what exactly we miss of original OTA service of XIAOMI?
laviniu_c said:
my advice? stick to the stock a2 rom. locked and full stock. the moment you need to start experimenting is when the android one support stops OR if you really want root..
Click to expand...
Click to collapse
But I think it wouldn't be an option for who has triggered ARB4! isn't it? (I read when you got ARB4 you must forget AndroidOne! even TestPoint won't help)
laviniu_c said:
if you wanted miui and you're outside china, mi 6x is still NOT the way to go. cuz it doesnt have an official global rom anyway. i dont get why everyone is jumping through hoops to get unofficial roms installed with stock support available.
Click to expand...
Click to collapse
Again I didn't get what do you mean, could you please explain it a bit more? (since my current MIUI 10.4 has almost everything)
http://bigota.d.miui.com/V10.0.2.0....0.PDIMIFJ_20181206.0000.00_9.0_02b8deeb6d.tgz this should work with the testpoint/edl method and miflash. (unless arb does something to stop it)
there's a few problems with your approach.
1) not official. any time the guys maintaining the custom rom can decide to stop producing it.
2) all work into these custom roms is voluntary. are they sometime better? sure, never said they werent but again, xiaomi/google/android have far far more resources at their disposal and while the phone is under the official period it will be maintained.
3) did you bother to read the first lines in any custom rom? they take 0 responsibility for whatever happens to your phone. they do not intend to break it, but they dont have to support you if you're in trouble either. if you dont have a valid warranty, that's understandable, you don't lose anything. but guess what? there are official vendors for xiaomi all over the world, offering official warranty. that holds as long as you're on STOCK.
4) though most custom roms are well intended, there is nothing assuring you there's nothing inside there that you dont want installed. you move your trust from xiaomi/google/android (which you can hold accountable) to whoever made that rom (who just carpet say, it's your phone you're doing the flashing, anything happens you're on your own). in most cases those devs don't mean harm, but they could and there's nothing to stop them (and they would never put in the hours of work if there was accountability for their action - i perfectly understand them. it's sortof like, i can try to do this, but because my work is not paid for by the end user they do not have any hold over me. it's correct and yet at the same time it's very very dangerous.). ever seen a custom miui built by a shop? i have, it's packed full of junk, bugs and malware. another thing here is testing. the official rom goes through a bunch of tests/beta versions. not saying it's perfect but it's better then the "known bugs: you tell me". custom rom devs cannot do it any other way, they dont have the time to test or the team to test.
5) the official devs don't have this option, they have a job and do it. it's a completely different approach.
this is not a rant against custom rom devs, i understand them 100%, they're trying to help. what i'm saying is there's always 2 sides to each story. there's no right or wrong, there's just what's best for each user. some of us will want the safe and easy way of the stock roms. some will want custom roms. in the end everyone is doing what they choose with their phone.
laviniu_c said:
http://bigota.d.miui.com/V10.0.2.0....0.PDIMIFJ_20181206.0000.00_9.0_02b8deeb6d.tgz this should work with the testpoint/edl method and miflash. (unless arb does something to stop it)
Click to expand...
Click to collapse
I think it will not work, the Actual duty of ARB4 is to preventing you to use these things! as much as I know after ARB4 you have two options: MIUI 10 or custom ROMs such as Havoc or so, for AndroidONE we need to wait a version of AndroidONE which be compatible with ARB4! otherwise flashing STOCK AndroidONE will simply brick your phone! THE whole IDEA of this THREAT is this!
And BTW as much as I know XIAOMI.EU is cooperating now with the XIAOMI ! besides we do not keep a phone for a whole life time, 2-3 years of supports would be far enough. and they do offer it right now!
and I would like to lock the BL for further security reasons but it seems to be impossible so far otherwise someone suggests a practical way for it.
I guess you need to contact me.
sz.hatef said:
If it locked again my BL, what would be the solution? I didn't find any.
Click to expand...
Click to collapse
Hey its not very good to talk here in xda.We can try some methods!
Chat with me in telegram.
 @blackgryphon1
Dont worry about brick,bcz im the only one who can unbrick,downgrade a xiaomi phone even if its arb4.
Feel free to contact me.
Also join my group i will be there too.
Since i cant post links,search this on telegram <<its my group>><<iT HAS A BLACK PHONE WALLPAPER AND IT HAS 86 MEMBERS!
Mi A2 & Mi 6X
Tech_jetoncesaj said:
Hey its not very good to talk here in xda.We can try some methods!
Chat with me in telegram.
@blackgryphon1
Dont worry about brick,bcz im the only one who can unbrick,downgrade a xiaomi phone even if its arb4.
Feel free to contact me.
Also join my group i will be there too.
Since i cant post links,search this on telegram <<its my group>><<iT HAS A BLACK PHONE WALLPAPER AND IT HAS 86 MEMBERS!
Mi A2 & Mi 6X
Click to expand...
Click to collapse
Just as I said, I would like to know the possible ways, currently I haven't any problem, could you explain it a bit , how could it possible to reunlock my BL if it get locked on MIUI?
ahem.
There is NO way to unlock an A2 device that has been converted to an 6X with ARB anti 4.
Your bootloaders are important in this case (xbl.elf and abl.elf). ARB and bootloader status is also managed here.
If you are using A2, with 6X system without ARB anti 4, that phone uses A2 bootloader. So if you lock your bootloader, it will brick to fastboot (The system has been destroyed / Press any key to shutdown). EDL will still accept any flashes without authentication. You may or may not be able to unlock it again through fastboot.
If you are using A2, with 6X system and firmware with ARB anti 4, that phone uses 6X bootloader. So if you lock your bootloader, it will brick to fastboot (The system has been destroyed / Press any key to shutdown). EDL will not accept any flashes without authentication*. You cannot unlock the phone through fastboot**.
*There is a workaround to this but you need to open your phone's back.
**Because MIUI devices need Mi Unlock to be unlocked, and Mi Unlock wants you to log in, and the system is not accessible, your phone will stay bricked.
You can still unbrick the phone with the above workaround, but you will be stuck with China MIUI and won't be able to unlock your phone's bootloader even if you logged in because your phone is not registered on Mi Unlock database (since Android One devices do not need/use Mi Unlock because of Google's enforcements).
Too long, didn't read?
Do not attempt to lock your phone. Even if you are on fully stock with your phone's own firmware. Locking is extremely risky due to the fact that even unlocking the bootloader corrupts the system integrity in some way.
Letzen said:
ahem.
There is NO way to unlock an A2 device that has been converted to an 6X with ARB anti 4.
Your bootloaders are important in this case (xbl.elf and abl.elf). ARB and bootloader status is also managed here.
If you are using A2, with 6X system without ARB anti 4, that phone uses A2 bootloader. So if you lock your bootloader, it will brick to fastboot (The system has been destroyed / Press any key to shutdown). EDL will still accept any flashes without authentication. You may or may not be able to unlock it again through fastboot.
If you are using A2, with 6X system and firmware with ARB anti 4, that phone uses 6X bootloader. So if you lock your bootloader, it will brick to fastboot (The system has been destroyed / Press any key to shutdown). EDL will not accept any flashes without authentication*. You cannot unlock the phone through fastboot**.
*There is a workaround to this but you need to open your phone's back.
**Because MIUI devices need Mi Unlock to be unlocked, and Mi Unlock wants you to log in, and the system is not accessible, your phone will stay bricked.
You can still unbrick the phone with the above workaround, but you will be stuck with China MIUI and won't be able to unlock your phone's bootloader even if you logged in because your phone is not registered on Mi Unlock database (since Android One devices do not need/use Mi Unlock because of Google's enforcements).
Too long, didn't read?
Do not attempt to lock your phone. Even if you are on fully stock with your phone's own firmware. Locking is extremely risky due to the fact that even unlocking the bootloader corrupts the system integrity in some way.
Click to expand...
Click to collapse
Thanks a lot, it explains everything and totally sounds right to me,
Just couple questions:
so in any circumstances it could be again usable just with a Chinese ROM, and so there will be no way to install Google Play on it, since there will be no custom recovery , no root accessibility , ... , It will be for ever with a Pure Chinese ROM (which practically would be unusable for us). Am I right?
Considering above situation, sending the device to a Xiaomi Center could help us to get back to any kind of global ROM (AndroidONE / MIUI) or not?
Right now I am totally happy with Xiaomi.eu MIUI BETA roms, no need to switch to other projects, I need to know is there any chance to stuck with a locked BL while attempting the new Beta ROMs? I use PitchBlack to flash new ROMs every week. Or if I want to ask it in short: How to prevent to get a Locked BL?
Thanks a lot again.
sz.hatef said:
Thanks a lot, it explains everything and totally sounds right to me,
Just couple questions:
so in any circumstances it could be again usable just with a Chinese ROM, and so there will be no way to install Google Play on it, since there will be no custom recovery , no root accessibility , ... , It will be for ever with a Pure Chinese ROM (which practically would be unusable for us). Am I right?
Considering above situation, sending the device to a Xiaomi Center could help us to get back to any kind of global ROM (AndroidONE / MIUI) or not?
Right now I am totally happy with Xiaomi.eu MIUI BETA roms, no need to switch to other projects, I need to know is there any chance to stuck with a locked BL while attempting the new Beta ROMs? I use PitchBlack to flash new ROMs every week. Or if I want to ask it in short: How to prevent to get a Locked BL?
Thanks a lot again.
Click to expand...
Click to collapse
does flashing a MIUI.eu beta ROM without deleting the firmware folder lock the bootloader ?
what's the benefit from not deleting the firmware folder?
i'm using a converted MI A2
thanks

How do I unblock the bootloader on the Xiaomi Mi 8?

I'm thinking about buying a Xiaomi Mi 8 today, but I'm really struggling to find out how to unlock the bootloader so I can flash TWRP etc.
Can somebody point me in the right direction please?
I'm relatively experienced and was running lineageos on my old One Plus One.
Thanks
Candiety said:
I'm thinking about buying a Xiaomi Mi 8 today, but I'm really struggling to find out how to unlock the bootloader so I can flash TWRP etc.
Can somebody point me in the right direction please?
I'm relatively experienced and was running lineageos on my old One Plus One.
Thanks
Click to expand...
Click to collapse
1. Developer options -> enable oem unlocking and usb debugging -> mi unlock status then tap add account and device(you need mobile data for this)
2. Apply for unlocking here and follow the steps written there. Your mi account when logging in for unlocking should be the same mi account on your mi 8.
Note: when you try to unlock for the first time you will get an error. This is because you need to wait for 7(or is it 15?) days before you can proceed on unlocking your device. So, be sure to apply for unlocking as soon as you get your device.
P.S. welcome to the mi 8 community!
xCalibur15 said:
1. Developer options -> enable oem unlocking and usb debugging -> mi unlock status then tap add account and device(you need mobile data for this)
2. Apply for unlocking here and follow the steps written there. Your mi account when logging in for unlocking should be the same mi account on your mi 8.
Note: when you try to unlock for the first time you will get an error. This is because you need to wait for 7(or is it 15?) days before you can proceed on unlocking your device. So, be sure to apply for unlocking as soon as you get your device.
P.S. welcome to the mi 8 community!
Click to expand...
Click to collapse
Yes, unfortunately it is 15 days
Make sure to go ahead and complete the steps. Because if you wait a month or 6 months, you still have to wait 15 days before they will allow the unlock. Highly annoying!
Make sure about the version you buy. The are China version and international version. There were sellers selling Chinese version with global ROM installed, this means the bootloader is already unlocked but you could have serious problems if you relocked it. So if you're not Chinese make sure to buy a global version with locked bootloader.

Categories

Resources