Related
[Emergency Guide] How to Blank or regenerate Watch (WA 5.01) after clearing \system
Prerequisit :
Be sure to have latest adb (1.0.32) and fastboot version. Download it from here
Link to know how to enter into fastboot
Under Fastboot
Download boot from here
Code:
- fastboot flash boot bootll.img
Download TWRP recovery from here
Code:
- fastboot flash recovery twrp.img
Go to Recovery and format all twice with TWRP recovery
Flashing back stock recovery :
Download stock recovery from here
Code:
- fastboot flash recovery recoverll.img
Back to stock recovery, format twice
Regenereting system step :
Download rooted AW 5.01 system directory from here
Code:
- fastboot flash system system.img
Go back to stock recovery, Choose apply update from ADB (adb sideload)
Download AW 5.01 update from here
Code:
- adb sideload 149e0c34d0ab10d3e356d6301915dcc04552d9db.signed-lenok-LWX48P-from-KNX01R.149e0c34.zip
Reboot system now. Choose langage, etc.
Nota : At this time, if you don't need root and Chainfire SU (witch is useless at this time) you can go just for flashing TWRP by :
Code:
- adb reboot bootloader
- fastboot flash recovery twrp.img
And that's it.
Or following steps : Rooting back Watch and custom TWRP Recovery support
Download stock rooted AW 5.01 system directory from here
Code:
- adb reboot bootloader
- fastboot flash system system.img
Reboot Watch, autorize adb debug on the watch
Download Chainfire SU 2.40 from here or BETA-SuperSU-v2.42.zip
Note : You can remove Superuser.apk from the zip file into \common recovery which it is not compatible with AW 5.01
Pushing SU to the watch
Code:
- adb push supersu.zip /sdcard/su.zip
Back to Fastmod and flashing TWRP advanced recovery
Code:
- adb reboot bootloader
- fastboot flash recovery twrp.img
Restart watch and go to TWRP recovery, install/flash su.zip from sdcard, reboot
Et Voilà !
Nice write up, I'm not sure doing the adb sideload does anything though. The system image is already patched, it was a backup from my device just rooted. Currently I have busybox working on the device and and working on init.d support so any changes we want to make will survive after reboot.
Sent from my A0001 using XDA Free mobile app
It'ill be nice :good:
HELP
I've done everything to try to get back to AW 5.01 but when I get to the adb sidelload part it says "error: device not found".
It's seem that windows 8 is not detecting my watch. Anyone have any insight on this would be great thanks!
Jay
edit...
Never Mind Got it to Work!
How did you get it to work?
I managed it, too. Turns out I had to reinstall drivers while in sideload mode. You can do it in device manager, select from computer, from list and find ADB composite device.
Hey guys, I accidentaly installed supersu apk on my watch and now I can see it in the menu all the time. How can I remove it from /system/app/SuperSu? Do I have to root first in order to gain rw rights on /system, remove whole SuperSu folder than do a factory reset for example and it won't show up anymore?
hornedfiend said:
Hey guys, I accidentaly installed supersu apk on my watch and now I can see it in the menu all the time. How can I remove it from /system/app/SuperSu? Do I have to root first in order to gain rw rights on /system, remove whole SuperSu folder than do a factory reset for example and it won't show up anymore?
Click to expand...
Click to collapse
simply flash this in twrp > https://hostr.co/3yMSrXUUMD8B and it will remove for you and you will get root also
I have was trying to flash the TWRP recovery in my phone (Redmi 4a), but the recovery always got replaced after every reboot with the STOCK recovery.
I am now going to show how to flash this, beside the command line technique......(Although, some command line is necessary).....
1. Set adb and fastboot files in your Windows pc, fine
2. Now download the required twrp on to your pc and place it in adb-fastboot's folder.... or techies could path to that ****....
3. Enter bootloader with.....
adb reboot bootloader4. Now boot to twrp using......
fastboot boot recovery.img(I have named that twrp file as recovery)
5. Download super su zip, move it in phone, root your device....... reboot your device.......Now the second phase of process comes
6. Install twrp app in your phone, open it, copy the twrp image file to phone, tap on flash recovery
7. Select your twrp recovery in the phone and boom....... you have done it...... reboot to recovery by adb reboot recovery
I FORGOT TO MENTION, you should have your device unlocked, and I AM NOT RESPONSIBLE FOR ANY MISHAP and FOR THE STATE TO PLAY CRICKET WITH YOUR PHONE...... I am honest ....... IT WORKED FOR ME......
any tester n confirmed worked ?
No reason to do all those, you can flash recovery directly from fastboot with one command. The command:
Code:
fastboot boot recovery.img
just boot to that recovery one time. This is good for testing a recovery or use it for one time without install it.
If you want to flash a recovery you just need to use:
Code:
fastboot flash recovery recovery.img
Also for both commands isn't necessary to rename the recovery file or to put it adb folder, or root the device. Just need to specify the path and filename in place of "recovery.img". For e.g:
Code:
fastboot flash recovery C:\Phone\Recoveries\twrp_3.2.1.img
Pre-requisite :
1.Unlocked Bootloader
2. Backup your data (Just in case you brick your device)
3. Download twrp.img and copy it into your computer.
4. Download and Copy flashable TWRP and Magisk zip into your device.
Steps:
1. Go to the twrp.img file location into your computer. "cmd" in path directory bar and hit "enter".
2. Reboot your device into fastboot mode and connect to your computer
3. Enter following command : fastboot devices (You can see your device listed over there)
4. Enter another command : fastboot boot twrp.img (Wait for a while and your device will boot into twrp)
5. Now flash the twrp flashable zip and reboot your device.
6. Now install magisk.zip to gain a root access.
Download all the files from : https://drive.google.com/drive/folders/1HTmBLWiAwrXzdjipsKu69VfWJcjaWAFC?usp=sharing
This is super! I can confirm it's working, but it broke the wifi and camera.. how did you do it without breaking them?
I'll download oos 10.3 zip and try again.
Update, nevermind, seemingly twrp is struggling with it's things.. maybe it is encryption, tho i seem to be un encrypted, not sure..
Anyway root was achieved for me with the magisk image modding method.
Well, a lot of people wanting to root global miui 11.0.7 and not being able to... So I did it on my Global redmi 7a - MIUI 11.0.7 Global.
Simple though. Apart from whats being said, u can update Magisk to v20.+ after flashing
the 19 version, through the app Magisk Manager automatically installed after flashing.
Prerequisites & Downloads:
- Your bootloader must be unlocked (https://en.miui.com/unlock/)
- ADB and Fastboot -> I did on windows version, maybe can be done on linux...
- patched boot.img for miui 11.0.7 global
- vbmeta.img
- Magisk v19.3 zip -> place it on the root of your external sdcard
This is basically copied from cg730620's post [Guide][Redmi 7A] TWRP, Root with Magisk, Custom ROM [GSI][Pie] and Avedroid's vid
1 - Unlock bootloader and flash stock miui 11.0.7 recovery rom, using miflash 2017
CAREFUL! On the lower right corner check the first option, "clean all", or you may end up with a locked bootloader.
-> exactly the same from the quoted post from now on, what differs is the files and we are only flashing magisk v19.3
"2. Install Minimal ADB and Fastboot
3. Rename patched boot file to boot.img
4. Rename custom recovery file to recovery.img
5. Place boot.img, recovery.img, vbmeta.img in Program Files (x86)/Minimal ADB and Fastboot/ folder
6. Turn off your phone.
7. Reboot phone to fastboot mode by holding Volume-down button while pressing On/Off-button. You know you are in fastboot mode when you see a cartoon bunny.
8. Connect the phone to your PC via USB.
9. On your PC open command prompt and nagivate to ADB folder, or open command prompt window directly from right-click menu in ADB folder; just right-click on empty space and choose 'Open command prompt here'
10. In command prompt, enter the following commands:
Code:
Code:
fastboot flash boot boot.img
Code:
Code:
fastboot flash vbmeta vbmeta.img
Code:
Code:
fastboot flash recovery recovery.img
11. Now reboot to recovery: Press Volume-Up button on your phone and enter the following in command prompt:
or just turn off the phone and reboot by holding Volume-Up and On/Off button (release On/Off when phone turns on, keep holding Volume-Up until you see screen of TWRP recovery)
12. Swipe to allow modifications. If TWRP asks for PIN, enter the PIN code you set for your unlock screen.
13. In TWRP choose Wipe > Advanced Wipe. Select 'Dalvik / ART cache', 'System', 'Data', 'Cache'. Then Swipe to Wipe.
18. In TWRP choose Install. Select the Magisk zip-file on your phone and then Swipe to confirm flash.
Reboot to system, open Magisk, update and there u go.
Same steps of the beginning of Avedroid's video, only with modified boot.img and Magisk Version
https://www.youtube.com/watch?v=NSs08O6uGVI&t=324s
After 16:30 of the video he flashes a custom gsi rom which is not of the interest of this thread, just flash magisk.
Thanks to all who made it possible, especially Avedroid and cg730620
Post questions and answers here, please, NOT in PM.
Good luck!
Thank's it's work fine on custom gsi too, i just flash patch boot, vbmeta, finally install magisk success
I did everything right, however, when it came to installing Magisk, the following error occurred: "Updater process ended with ERROR: 1".
So I redid the whole process, but before installing Magisk I did the following: I went to Mount, I deselected the System partition and after that the installation proceeded normally.
Well, I don’t know if this is the best way to fix this problem, I don’t understand much of these things, but it ended up working for me.
Thanks for the post
I will do some tests to see if everything is working.
Can I just do this on MIUI 11.0.5 Global?
Omborkar said:
Can I just do this on MIUI 11.0.5 Global?
Click to expand...
Click to collapse
Download patched boot.img for ur rom instead of 11.0.7 boot.img I uploaded. Or patch it yourself.
I have a problem. Everytime I do the wipe it says only: "Failed to mount "vendor"(invalid argument)"
What to do?
Google play not certified... after flashing and installed magisk... Got solution??? Thanks
I've rooted my MoKee OS Android 10 rom. Can somebody help me change the system font? The font changer module in Magisk is not appearing in the search bar.
vincecabalan said:
I've rooted my MoKee OS Android 10 rom. Can somebody help me change the system font? The font changer module in Magisk is not appearing in the search bar.
Click to expand...
Click to collapse
I Tried To Root Mokee But Failed. Can You Please Tell Me How You Root Mokee
Hello, what files do I need to rename to boot.img and recovery.img? I'm lost
3. Rename the patched boot file to boot.img
4. Rename the custom recovery to recovery.img
RsAbubokor4 said:
I Tried To Root Mokee But Failed. Can You Please Tell Me How You Root Mokee
Click to expand...
Click to collapse
Extract boot.img of installer mokee.zip Patch boot image https://patcher.yaalex.xyz/ select include magisk Expect to do uploud after downloading rename boot.img sdcard Go twrp flash boot install magisk manager apk
Credit to @idcamper
vincecabalan said:
Extract boot.img of installer mokee.zip Patch boot image https://patcher.yaalex.xyz/ select include magisk Expect to do uploud after downloading rename boot.img sdcard Go twrp flash boot install magisk manager apk
Credit to @idcamper
Click to expand...
Click to collapse
I did according to this advice, uploaded boot.img to this site. Magisk works, but Wifi won't work . When I uploaded boot.img, Wifi works, then it shows that Magisk is not installed, but it was installed.
speed_cars said:
I did according to this advice, uploaded boot.img to this site. Magisk works, but Wifi won't work . When I uploaded boot.img, Wifi works, then it shows that Magisk is not installed, but it was installed.
Click to expand...
Click to collapse
try this process after flash zip of the last magisk from reset factory
Can i do this on miui 11.0.3.0 indian rom based on Android 10. If yes then i need recovery.img pls help.
4. Rename custom recovery file to recovery.img
- where i can download this?, or this is the outcome of step 1?
Everything works fine, exept password. When i set new password, let's say it is 1234, i set the password in the setting, then i press the power button for lock screen, i put the password in as usual, but it just says try again over and over, im pretty sure that it is not my fault. Thanks for reply.
Anyone have patched boot 11.0.4?
jurubebaamarga said:
Well, a lot of people wanting to root global miui 11.0.7 and not being able to... So I did it on my Global redmi 7a - MIUI 11.0.7 Global.
Simple though. Apart from whats being said, u can update Magisk to v20.+ after flashing
the 19 version, through the app Magisk Manager automatically installed after flashing.
Prerequisites & Downloads:
- Your bootloader must be unlocked (https://en.miui.com/unlock/)
- ADB and Fastboot -> I did on windows version, maybe can be done on linux...
- patched boot.img for miui 11.0.7 global
- vbmeta.img
- Magisk v19.3 zip -> place it on the root of your external sdcard
This is basically copied from cg730620's post [Guide][Redmi 7A] TWRP, Root with Magisk, Custom ROM [GSI][Pie] and Avedroid's vid
1 - Unlock bootloader and flash stock miui 11.0.7 recovery rom, using miflash 2017
CAREFUL! On the lower right corner check the first option, "clean all", or you may end up with a locked bootloader.
-> exactly the same from the quoted post from now on, what differs is the files and we are only flashing magisk v19.3
"2. Install Minimal ADB and Fastboot
3. Rename patched boot file to boot.img
4. Rename custom recovery file to recovery.img
5. Place boot.img, recovery.img, vbmeta.img in Program Files (x86)/Minimal ADB and Fastboot/ folder
6. Turn off your phone.
7. Reboot phone to fastboot mode by holding Volume-down button while pressing On/Off-button. You know you are in fastboot mode when you see a cartoon bunny.
8. Connect the phone to your PC via USB.
9. On your PC open command prompt and nagivate to ADB folder, or open command prompt window directly from right-click menu in ADB folder; just right-click on empty space and choose 'Open command prompt here'
10. In command prompt, enter the following commands:
Code:
Code:
fastboot flash boot boot.img
Code:
Code:
fastboot flash vbmeta vbmeta.img
Code:
Code:
fastboot flash recovery recovery.img
11. Now reboot to recovery: Press Volume-Up button on your phone and enter the following in command prompt:
or just turn off the phone and reboot by holding Volume-Up and On/Off button (release On/Off when phone turns on, keep holding Volume-Up until you see screen of TWRP recovery)
12. Swipe to allow modifications. If TWRP asks for PIN, enter the PIN code you set for your unlock screen.
13. In TWRP choose Wipe > Advanced Wipe. Select 'Dalvik / ART cache', 'System', 'Data', 'Cache'. Then Swipe to Wipe.
18. In TWRP choose Install. Select the Magisk zip-file on your phone and then Swipe to confirm flash.
Reboot to system, open Magisk, update and there u go.
Same steps of the beginning of Avedroid's video, only with modified boot.img and Magisk Version
After 16:30 of the video he flashes a custom gsi rom which is not of the interest of this thread, just flash magisk.
Thanks to all who made it possible, especially Avedroid and cg730620
Post questions and answers here, please, NOT in PM.
Good luck!
Click to expand...
Click to collapse
I wish to obtain root / access to magisk,
Wanting to know if I can do this without losing data (having to delete system data)
Thank you
Hello.
So I was trying to root my Redmi 7A - v10.2.1 with TWRP 3.3.1 but now I am stuck in a bootloop.
What I did:
1. Flash boot.img
2. Flash recovery.img
3. Flash vbmeta.img
4. reboot
Phone rebooted to system and TWRP was installed.
Then I booted to TWRP to install Magisk-v23.0.zip,
I went to Advanced Wipe, then wiped 'Dalvik / ART cache', 'System', 'Data', 'Cache'.
When I rebooted, it went into a bootloop, when I go to TWRP it says 'No OS INSTALLED".
What did I do wrong? And how to recover?
Thanks.
Cinox said:
I did everything right, however, when it came to installing Magisk, the following error occurred: "Updater process ended with ERROR: 1".
So I redid the whole process, but before installing Magisk I did the following: I went to Mount, I deselected the System partition and after that the installation proceeded normally.
Well, I don’t know if this is the best way to fix this problem, I don’t understand much of these things, but it ended up working for me.
Thanks for the post
I will do some tests to see if everything is working.
Click to expand...
Click to collapse
Im also getting the same error,, but what do you mean by "deselected the System partition". I see "system_root" in Mount but not "System"
Welcome to my thread. Today I am going to teach you how to install a custom recovery on the device and how to recover the original boot files on the phone to modify them. After modifying those files you will have root on the device. A lot of time and effort has been put into getting this to work. The custom recovery that we will be using is TWRP Recovery.
Note: Modifying your device will void the manufacturer's warranty.
All modifications made to your device are done at your own risk and you claim full
responsibility if the device is damaged or if data is lost.
First, we are going to enable OEM Unlock and USB Debugging. To do so, you will follow the steps below.
1. Sign in to your Mi Cloud Account on your phone.
2. Tap the “Settings” menu on your Mi 11 Ultra, then tap the “About Phone” option.
3. Tap the “MIUI Version” option several times until you see the “You are now a developer” message.
4. Tap the “Additional Settings” Menu, then tap the “Developer options” on your phone.
5. Activate the “OEM Unlock” option, then activate the “USB Debugging” option on your phone.
6. Tap the “Mi Unlock Status” option.
7. Tap “Agree” and then tap the “Add account and device” option on your phone.
8. Turn off your phone, then press the volume down button and the power button simultaneously to put your phone into fastboot mode.
9. Connect your phone to your PC via a USB cable.
10. Download the miflash ZIP file.
11. Extract the miflash unlock tool ZIP file. You will find the Mi USB Driver.exe file and the miflashunlock.exe file after extracting it.
12. Install the Mi USB driver on your PC.
13. Run the miflashunlock.exe file on your PC.
14. Tap the Agree button and then Sign in with your Mi Account after running the miflash_unlock.exe.
15. Click the “Unlock” button, then click the “Unlock anyway” button within the miflash tool to start the process.
16. Click the “Reboot phone” button after you see the “Unlocked successfully” message.
Downloads:
Unlock tool: https://en.miui.com/unlock/download_en.html
Additionally, we will need to have TWRP flashed to the recovery of the phone.
1. We will need to have ADB installed on the computer so download the 15 Second ADB Installer.
2. Run the ADB-Setup.exe.
3. Open a CMD terminal as an Administrator.
4. Type in the command: CD C:/ADB.
5. Type in the command: ADB Devices, make sure that there is a device showing up.
6. Download the TWRP.img to the ADB folder located on C:/ADB.
7. Make sure that you do not have a password or code lock on the device. There can not be any lock on the lock screen.
8. Type the command ADB Reboot Bootloader.
9. Type the command Fastboot Boot TWRP.img.
10. Navigate to the Advanced menu of TWRP and tap on “Install Recovery Ramdisk”.
11. Navigate back to the main menu then tap on Reboot and tap on Recovery.
Downloads:
15 Second ADB Installer: https://forum.xda-developers.com/t/...vers-15-seconds-adb-installer-v1-4-3.2588979/
TWRP image: https://drive.google.com/drive/folders/1ztP266XjxteVk8pxcD7-sD-IxihmODPV?usp=sharing
Now we will copy the three boot files on the phone and make backups.
1. Navigate to Mount on the root menu or TWRP.
2. Select the System Partition and Data partition then go back to the menu.
3. Navigate to Advanced then Terminal.
4. Type the command dd if=/dev/block/bootdevice/by-name/boot of=/sdcard/boot.img.
5. Type the command dd if=/dev/block/bootdevice/by-name/boot_a of=/sdcard/boot_a.img.
6. Type the command dd if=/dev/block/bootdevice/by-name/boot_b of=/sdcard/boot_b.img.
7. After all the commands have been entered you can now exit back to the system by rebooting to the system in the Reboot menu.
8. Next, we will install Magisk on the phone to modify the boot files, download the Magisk.apk file on your phone.
9. Open the apk and install the Magisk.apk on the device. You will have to enable Unknown Sources if you have not already.
10. Open Magisk and select install on the Magisk tab.
11. Under Method tap the Select and Patch a File and select the boot.img file.
12. Press the LET'S GO button after you have selected the file. (Make sure to note down the name of the Output file for each file).
13. Repeat steps 11 and 12 for boot file boot_a.img and boot file boot_b.img.
Downloads:
Magisk: https://github.com/topjohnwu/Magisk/releases
Now we will flash the boot files to the phone and we will be rooted!
1. Copy the files you just made from the storage of the phone under /Internal shared storage/Download/(Filenames) to the ADB folder located on C:/ADB
2. Restart the phone and once the phone screen turns off hold the Volume Down button to boot into fastboot.
3. Now this is where it is very crucial to ensure you know what each file corresponds to for the boot files. Type in the command Fastboot flash boot (Modified file name for boot.img).
4. Type in the command Fastboot Flash Boot_a (Modified file name for boot_a.img).
5. Type in the command Fastboot Flash Boot_b (Modified file name for boot_b.img).
6. Then type the command Fastboot reboot
7. Load Magisk and verify that it is indeed installed.
8. Boom rooted!
I don't get this I rooted much easier by simply flashing magisk.
I downloaded magisk zip
I then booted into fastboot connecting my ohone to the pc
I booted into twrp from fastboot with the command "fastboot boot twrp.img"
From twrp I simply flashed magisk.zip wiped dalvik and ART cache and rebooted the phone
Root done!
My question is now how can I update without loosing data.
I was thinking of installing the new rom via miflashtool without wiping data and then reflash magisk. It should work right?
xNAPx said:
I don't get this I rooted much easier by simply flashing magisk.
I downloaded magisk zip
I then booted into fastboot connecting my ohone to the pc
I booted into twrp from fastboot with the command "fastboot boot twrp.img"
From twrp I simply flashed magisk.zip wiped dalvik and ART cache and rebooted the phone
Root done!
My question is now how can I update without loosing data.
I was thinking of installing the new rom via miflashtool without wiping data and then reflash magisk. It should work right?
Click to expand...
Click to collapse
In my testing I couldn't get my phone to root with Magisk. I haven't tested that but it sounds like it should work.
Look it is super simple, it can be done on every rom with an unlocked bootloader (this must be obvious)
Download the latest magisk.zip file on your phone
Download the compatible TWRP for your device on your computer and put it into your ADB and fastboot folder and rename it "twrp.img" (make sure you replace the file extension with the ".img")
Reboot your phone into fastboot
Connect the phone to the PC
Run the check command "fastboot devices" to check if your device is listed
Then run the command "fastboot boot twrp.img"
Your phone will now boot into twrp recovery and there is no need to flash it and overwrite the original recovery
Now give twrp the permissions to look into your folder by unlocking it at boot (password of pattern depends on what you use normally for your phone)
Now since the twrp is chinese you must change your language into english (3rd button on the right then click on the globe on the up right and select the language you want)
Now go into wipe and wipe manually cache and dalvik
Now go into your system and search for magisk.zip, flash it and wipe again dalvik and cache.
Reboot your phone
Now when you boot you must have magisk through your apps, boot magisk and complete the installation process.
Reboot again and enjoy!
xNAPx said:
Look it is super simple, it can be done on every rom with an unlocked bootloader (this must be obvious)
Download the latest magisk.zip file on your phone
Download the compatible TWRP for your device on your computer and put it into your ADB and fastboot folder and rename it "twrp.img" (make sure you replace the file extension with the ".img")
Reboot your phone into fastboot
Connect the phone to the PC
Run the check command "fastboot devices" to check if your device is listed
Then run the command "fastboot boot twrp.img"
Your phone will now boot into twrp recovery and there is no need to flash it and overwrite the original recovery
Now give twrp the permissions to look into your folder by unlocking it at boot (password of pattern depends on what you use normally for your phone)
Now since the twrp is chinese you must change your language into english (3rd button on the right then click on the globe on the up right and select the language you want)
Now go into wipe and wipe manually cache and dalvik
Now go into your system and search for magisk.zip, flash it and wipe again dalvik and cache.
Reboot your phone
Now when you boot you must have magisk through your apps, boot magisk and complete the installation process.
Reboot again and enjoy!
Click to expand...
Click to collapse
is this working with EU ROM?
penyapu79 said:
is this working with EU ROM?
Click to expand...
Click to collapse
On Xiaomi EU is simpler because it inject twrp itself so you don't need to push start via adb
xNAPx said:
On Xiaomi EU is simpler because it inject twrp itself so you don't need to push start via adb
Click to expand...
Click to collapse
Ok thanks. I will try it later
On Xiaomi EU you can straight flash the update, wipe dalvik and cache and flash straight away magisk zip on top, rewipe dalvik and cache and reboot to system
xNAPx said:
On Xiaomi EU you can straight flash the update, wipe dalvik and cache and flash straight away magisk zip on top, rewipe dalvik and cache and reboot to system
Click to expand...
Click to collapse
any problem with bank apps after root?
I'm on official global ROM and I am using revolut with no issues
xNAPx said:
I'm on official global ROM and I am using revolut with no issues
Click to expand...
Click to collapse
I have the Chinese ultra with global rom but if I decide to sale how do I factory reset to do so? thanks ahead and wasn't sure where to post this.
If you want to sell it you must reinstall the original Chinese ROM and relock the bootloader
xNAPx said:
Now give twrp the permissions to look into your folder by unlocking it at boot (password of pattern depends on what you use normally for your phone)
Click to expand...
Click to collapse
Hi, xNAPx !
Thank you for this tuto, but i have a problem :/
At this step, twrp is booting straight on the menu, no password asked, and so, no access to data :/
Do you have an idea please ?
(i'm using xiaomi.eu_multi_MI11Pro_MI11Ultra_21.12.8_v12-12-fastboot)
I believe this is a known issue, there is a problem on some versions of twrp with encryption, to me never happened. What kind of screen security do you have on your phone?
xNAPx said:
I believe this is a known issue, there is a problem on some versions of twrp with encryption, to me never happened. What kind of screen security do you have on your phone?
Click to expand...
Click to collapse
A password
You can try 2 things, remove the screen lock protection or inject a different version of twrp, I never had this problem as I boot twrp via adb
xNAPx said:
You can try 2 things, remove the screen lock protection or inject a different version of twrp, I never had this problem as I boot twrp via adb
Click to expand...
Click to collapse
Thank you
Removal of the screen lock resulted as a failure too (same problem than with the screen lock)
I don't know and can't seem to find another twrp for the mi11 Ultra than this one :
Mi11Ultra(Pro)-twrp3.5.1-recovery-21.5.9-decrypted.img | by Orjon for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Sorry :/
Push it via adb then, in the shell type:
Fastboot boot twrp.img
xNAPx said:
Push it via adb then, in the shell type:
Fastboot boot twrp.img
Click to expand...
Click to collapse
That's what i'm doing from the beginning, but it doesn't work
What does not work in specific? It's a bit too generic