Welcome to my thread. Today I am going to teach you how to install a custom recovery on the device and how to recover the original boot files on the phone to modify them. After modifying those files you will have root on the device. A lot of time and effort has been put into getting this to work. The custom recovery that we will be using is TWRP Recovery.
Note: Modifying your device will void the manufacturer's warranty.
All modifications made to your device are done at your own risk and you claim full
responsibility if the device is damaged or if data is lost.
First, we are going to enable OEM Unlock and USB Debugging. To do so, you will follow the steps below.
1. Sign in to your Mi Cloud Account on your phone.
2. Tap the “Settings” menu on your Mi 11 Ultra, then tap the “About Phone” option.
3. Tap the “MIUI Version” option several times until you see the “You are now a developer” message.
4. Tap the “Additional Settings” Menu, then tap the “Developer options” on your phone.
5. Activate the “OEM Unlock” option, then activate the “USB Debugging” option on your phone.
6. Tap the “Mi Unlock Status” option.
7. Tap “Agree” and then tap the “Add account and device” option on your phone.
8. Turn off your phone, then press the volume down button and the power button simultaneously to put your phone into fastboot mode.
9. Connect your phone to your PC via a USB cable.
10. Download the miflash ZIP file.
11. Extract the miflash unlock tool ZIP file. You will find the Mi USB Driver.exe file and the miflashunlock.exe file after extracting it.
12. Install the Mi USB driver on your PC.
13. Run the miflashunlock.exe file on your PC.
14. Tap the Agree button and then Sign in with your Mi Account after running the miflash_unlock.exe.
15. Click the “Unlock” button, then click the “Unlock anyway” button within the miflash tool to start the process.
16. Click the “Reboot phone” button after you see the “Unlocked successfully” message.
Downloads:
Unlock tool: https://en.miui.com/unlock/download_en.html
Additionally, we will need to have TWRP flashed to the recovery of the phone.
1. We will need to have ADB installed on the computer so download the 15 Second ADB Installer.
2. Run the ADB-Setup.exe.
3. Open a CMD terminal as an Administrator.
4. Type in the command: CD C:/ADB.
5. Type in the command: ADB Devices, make sure that there is a device showing up.
6. Download the TWRP.img to the ADB folder located on C:/ADB.
7. Make sure that you do not have a password or code lock on the device. There can not be any lock on the lock screen.
8. Type the command ADB Reboot Bootloader.
9. Type the command Fastboot Boot TWRP.img.
10. Navigate to the Advanced menu of TWRP and tap on “Install Recovery Ramdisk”.
11. Navigate back to the main menu then tap on Reboot and tap on Recovery.
Downloads:
15 Second ADB Installer: https://forum.xda-developers.com/t/...vers-15-seconds-adb-installer-v1-4-3.2588979/
TWRP image: https://drive.google.com/drive/folders/1ztP266XjxteVk8pxcD7-sD-IxihmODPV?usp=sharing
Now we will copy the three boot files on the phone and make backups.
1. Navigate to Mount on the root menu or TWRP.
2. Select the System Partition and Data partition then go back to the menu.
3. Navigate to Advanced then Terminal.
4. Type the command dd if=/dev/block/bootdevice/by-name/boot of=/sdcard/boot.img.
5. Type the command dd if=/dev/block/bootdevice/by-name/boot_a of=/sdcard/boot_a.img.
6. Type the command dd if=/dev/block/bootdevice/by-name/boot_b of=/sdcard/boot_b.img.
7. After all the commands have been entered you can now exit back to the system by rebooting to the system in the Reboot menu.
8. Next, we will install Magisk on the phone to modify the boot files, download the Magisk.apk file on your phone.
9. Open the apk and install the Magisk.apk on the device. You will have to enable Unknown Sources if you have not already.
10. Open Magisk and select install on the Magisk tab.
11. Under Method tap the Select and Patch a File and select the boot.img file.
12. Press the LET'S GO button after you have selected the file. (Make sure to note down the name of the Output file for each file).
13. Repeat steps 11 and 12 for boot file boot_a.img and boot file boot_b.img.
Downloads:
Magisk: https://github.com/topjohnwu/Magisk/releases
Now we will flash the boot files to the phone and we will be rooted!
1. Copy the files you just made from the storage of the phone under /Internal shared storage/Download/(Filenames) to the ADB folder located on C:/ADB
2. Restart the phone and once the phone screen turns off hold the Volume Down button to boot into fastboot.
3. Now this is where it is very crucial to ensure you know what each file corresponds to for the boot files. Type in the command Fastboot flash boot (Modified file name for boot.img).
4. Type in the command Fastboot Flash Boot_a (Modified file name for boot_a.img).
5. Type in the command Fastboot Flash Boot_b (Modified file name for boot_b.img).
6. Then type the command Fastboot reboot
7. Load Magisk and verify that it is indeed installed.
8. Boom rooted!
I don't get this I rooted much easier by simply flashing magisk.
I downloaded magisk zip
I then booted into fastboot connecting my ohone to the pc
I booted into twrp from fastboot with the command "fastboot boot twrp.img"
From twrp I simply flashed magisk.zip wiped dalvik and ART cache and rebooted the phone
Root done!
My question is now how can I update without loosing data.
I was thinking of installing the new rom via miflashtool without wiping data and then reflash magisk. It should work right?
xNAPx said:
I don't get this I rooted much easier by simply flashing magisk.
I downloaded magisk zip
I then booted into fastboot connecting my ohone to the pc
I booted into twrp from fastboot with the command "fastboot boot twrp.img"
From twrp I simply flashed magisk.zip wiped dalvik and ART cache and rebooted the phone
Root done!
My question is now how can I update without loosing data.
I was thinking of installing the new rom via miflashtool without wiping data and then reflash magisk. It should work right?
Click to expand...
Click to collapse
In my testing I couldn't get my phone to root with Magisk. I haven't tested that but it sounds like it should work.
Look it is super simple, it can be done on every rom with an unlocked bootloader (this must be obvious)
Download the latest magisk.zip file on your phone
Download the compatible TWRP for your device on your computer and put it into your ADB and fastboot folder and rename it "twrp.img" (make sure you replace the file extension with the ".img")
Reboot your phone into fastboot
Connect the phone to the PC
Run the check command "fastboot devices" to check if your device is listed
Then run the command "fastboot boot twrp.img"
Your phone will now boot into twrp recovery and there is no need to flash it and overwrite the original recovery
Now give twrp the permissions to look into your folder by unlocking it at boot (password of pattern depends on what you use normally for your phone)
Now since the twrp is chinese you must change your language into english (3rd button on the right then click on the globe on the up right and select the language you want)
Now go into wipe and wipe manually cache and dalvik
Now go into your system and search for magisk.zip, flash it and wipe again dalvik and cache.
Reboot your phone
Now when you boot you must have magisk through your apps, boot magisk and complete the installation process.
Reboot again and enjoy!
xNAPx said:
Look it is super simple, it can be done on every rom with an unlocked bootloader (this must be obvious)
Download the latest magisk.zip file on your phone
Download the compatible TWRP for your device on your computer and put it into your ADB and fastboot folder and rename it "twrp.img" (make sure you replace the file extension with the ".img")
Reboot your phone into fastboot
Connect the phone to the PC
Run the check command "fastboot devices" to check if your device is listed
Then run the command "fastboot boot twrp.img"
Your phone will now boot into twrp recovery and there is no need to flash it and overwrite the original recovery
Now give twrp the permissions to look into your folder by unlocking it at boot (password of pattern depends on what you use normally for your phone)
Now since the twrp is chinese you must change your language into english (3rd button on the right then click on the globe on the up right and select the language you want)
Now go into wipe and wipe manually cache and dalvik
Now go into your system and search for magisk.zip, flash it and wipe again dalvik and cache.
Reboot your phone
Now when you boot you must have magisk through your apps, boot magisk and complete the installation process.
Reboot again and enjoy!
Click to expand...
Click to collapse
is this working with EU ROM?
penyapu79 said:
is this working with EU ROM?
Click to expand...
Click to collapse
On Xiaomi EU is simpler because it inject twrp itself so you don't need to push start via adb
xNAPx said:
On Xiaomi EU is simpler because it inject twrp itself so you don't need to push start via adb
Click to expand...
Click to collapse
Ok thanks. I will try it later
On Xiaomi EU you can straight flash the update, wipe dalvik and cache and flash straight away magisk zip on top, rewipe dalvik and cache and reboot to system
xNAPx said:
On Xiaomi EU you can straight flash the update, wipe dalvik and cache and flash straight away magisk zip on top, rewipe dalvik and cache and reboot to system
Click to expand...
Click to collapse
any problem with bank apps after root?
I'm on official global ROM and I am using revolut with no issues
xNAPx said:
I'm on official global ROM and I am using revolut with no issues
Click to expand...
Click to collapse
I have the Chinese ultra with global rom but if I decide to sale how do I factory reset to do so? thanks ahead and wasn't sure where to post this.
If you want to sell it you must reinstall the original Chinese ROM and relock the bootloader
xNAPx said:
Now give twrp the permissions to look into your folder by unlocking it at boot (password of pattern depends on what you use normally for your phone)
Click to expand...
Click to collapse
Hi, xNAPx !
Thank you for this tuto, but i have a problem :/
At this step, twrp is booting straight on the menu, no password asked, and so, no access to data :/
Do you have an idea please ?
(i'm using xiaomi.eu_multi_MI11Pro_MI11Ultra_21.12.8_v12-12-fastboot)
I believe this is a known issue, there is a problem on some versions of twrp with encryption, to me never happened. What kind of screen security do you have on your phone?
xNAPx said:
I believe this is a known issue, there is a problem on some versions of twrp with encryption, to me never happened. What kind of screen security do you have on your phone?
Click to expand...
Click to collapse
A password
You can try 2 things, remove the screen lock protection or inject a different version of twrp, I never had this problem as I boot twrp via adb
xNAPx said:
You can try 2 things, remove the screen lock protection or inject a different version of twrp, I never had this problem as I boot twrp via adb
Click to expand...
Click to collapse
Thank you
Removal of the screen lock resulted as a failure too (same problem than with the screen lock)
I don't know and can't seem to find another twrp for the mi11 Ultra than this one :
Mi11Ultra(Pro)-twrp3.5.1-recovery-21.5.9-decrypted.img | by Orjon for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Sorry :/
Push it via adb then, in the shell type:
Fastboot boot twrp.img
xNAPx said:
Push it via adb then, in the shell type:
Fastboot boot twrp.img
Click to expand...
Click to collapse
That's what i'm doing from the beginning, but it doesn't work
What does not work in specific? It's a bit too generic
Related
IMPORTANT NOTE ABOUT ROOTING:
After flashing TWRP 3.0.2, use the SuperSU 2.46 flashable zip, do NOT use latest version or will result in a bootloop. Good Luck and have fun with rooting.
REQUIREMENTS
1- Unlocked Bootloader (search on google if you dont know how to unlock)
2- Drivers and Adb/Fastboot commands knowledge
--------------------------------------------------------------------------------------------------------------------------------
New TWRP bugfix update! Now you can flash stock rom on TWRP without bricking! Download Page updated!
Bugs:
1- adb shell command needs to be sent before system partition is mounted or it will give an error, after doing adb shell you can mount system and do all the modifications you need.
2- You cant flash any img on twrp it gives an error, im trying to fix.
3- Backups do work, but everytime twrp restarts, the serial number folder seems to change (which means that on /TWRP/BACKUPS/serialnumber/backupsinside/ changes every reboot so you have to go get the backup inside the old serialnumber folder and put on the new serialnumber folder).
Im leaving an unsecured boot image because system does not boot android if anything seems changed. So please if system does not boot after flashing twrp/rooting, flash the unsecured boot img on fastboot
Steps to Install TWRP and root
1. Download and extrct the files: https : // drive. google . com/file/d/0BxzG5iupOOSKNTdlRC1Wd0VmTlk/view
2. Power off the tablet.
3. Enter fastboot mode by pressing the power button while holding down Vol -
4. Open up command prompt and navigate to the directory where fastboot.exe is located.
5. Pass the following commands:
fastboot flash boot unsecuredboot.img
fastboot flash recovery TWRP.img
6. Reboot into recovery (TWRP) and install SuperSU v2.46.zip ---
Continuation 6. Step by Step of Step 6 since people seem to have been running into issues with it:
After rebooting to TWRP and having SuperSU.zip in the tablet storage. Go on Install tab and press the supersu file and install/flash it then reboot the device.
Hello,
I finally managed to install a custom GSI Rom with TWRP and Magisk on my Redmi 7A. And I want to share a detailed guide for everyone who is struggling to do the same. Tested with MIUI 10.2.5.0 Global. Cannot guarantee for other versions.
WARNING:
You need to backup your data before installing. I am not responsible for any damage or loss that might occur. Proceed at your own risk.
Prerequisites:
- Your bootloader must be unlocked (https://en.miui.com/unlock/)
- GSI Rom of your choice. Only a64 A/B (arm32_binder64_ab). No other GSIs will do.
- ADB and Fastboot
- patched boot.img
- TWRP recovery
- vbmeta.img
- Magisk
- Permissiver_v4.zip
- Certification patch
- Treble Overlay file
- GApps (if needed)
Installation guide:
1. Download the files.
GSI Rom:
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
I installed Lineage OS 16 GSI (lineage-16.0-20191017-UNOFFICIAL-treble_a64_bvN). Everything works, except for auto-brightness.
https://forum.xda-developers.com/pr...i-lineageos-16-0-gsi-arm64-ab-how-to-t3908029
Minimal ADB and Fastboot
https://forum.xda-developers.com/showthread.php?t=2317790
Patched boot img file
(You have to choose the correct file according to your system version!)
http://www.mediafire.com/folder/zx0167qqaknc3/Redmi_7a_patched_boot
TWRP recovery
https://www.mediafire.com/file/irntn5ccdiguuuu/TWRP-20191023-3.3.1.0-pine.img/file
vbmeta file
http://www.mediafire.com/file/bgpn9b87b4t8yye/vbmeta.img/file
Magisk
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Permissiver
http://www.mediafire.com/file/61q8wln4y18ir5k/Permissiver_v4.zip/file
Certification Patch
http://www.mediafire.com/file/fboh2jocqak8cep/Certification_Patch.zip/file
Treble Overlay file (treble-overlay-xiaomi-redmi7a.apk)
http://www.mediafire.com/file/yc7vz3vg13mcrck/treble-overlay-xiaomi-redmi7a.apk/file
GApps (for Lineage OS 16 GSI choose 'ARM' & '9.0')
https://opengapps.org/
2. Unpack Minimal ADB and Fastboot to C:\ drive of your PC
3. Rename patched boot file to boot.img
4. Rename custom recovery file to recovery.img
5. Place boot.img, recovery.img, vbmeta.img in ADB folder
6. Turn off your phone.
7. Reboot phone to fastboot mode by holding Volume-down button while pressing On/Off-button. You know you are in fastboot mode when you see a cartoon bunny.
8. Connect the phone to your PC via USB.
9. On your PC open command prompt and nagivate to ADB folder, or open command prompt window directly from right-click menu in ADB folder; just right-click on empty space and choose 'Open command prompt here'
10. In command prompt, enter the following commands:
Code:
fastboot flash boot boot.img
Code:
fastboot flash vbmeta vbmeta.img
Code:
fastboot flash recovery recovery.img
11. Now reboot to recovery: Press Volume-Up button on your phone and enter the following in command prompt:
Code:
fastboot reboot
or just turn off the phone and reboot by holding Volume-Up and On/Off button (release On/Off when phone turns on, keep holding Volume-Up until you see screen of TWRP recovery)
12. Swipe to allow modifications. If TWRP asks for PIN, enter the PIN code you set for your unlock screen.
13. In TWRP choose Wipe > Advanced Wipe. Select 'Dalvik / ART cache', 'System', 'Data', 'Cache'. Then Swipe to Wipe.
14. Move the downloaded GSI file (*.img) to your phone. (Simply drag and drop in your PC's file manager to SD-card/memory of phone).
15. Flash the GSI Rom: In TWRP choose 'Install' > 'Install Image' and select the GSI. If you put the GSI on your external SD-card you first need to choose Select Storage > Micro SD card. After choosing the GSI file, at Select Partition to Flash Image choose System Image. Then Swipe to confirm Flash.
16. Reboot to Recovery
17. Move Magisk zip and Permissiver_v4.zip to your phone.
18. In TWRP choose Install. Select the Magisk zip-file on your phone and then Swipe to confirm flash.
19. Flash Permissiver_v4.zip the same way.
20. Flash GApps if needed
21. Flash Certification_Patch.zip.
22. Go back and choose Reboot > System
23. Fix big rounded corners on home screen:
Once you are in Android and in case you experience big ugly round corners around your home screen, put treble-overlay-xiaomi-redmi7a.apk in System > Overlay directory. You need a file manager with root access if you want to do this from within Android.
24. Fix brightness adjustment issue (no auto-brightness though):
Enable USB debugging in Developer Options menu. To make developer menu appear in Android, you need to tap 7 times on Android's 'build number'.
Now open command prompt from ADB folder on your PC while your phone is still connected via USB. Enter the following:
Code:
adb shell
su
setprop persist.sys.qcom-brightness $(cat /sys/class/leds/lcd-backlight/max_brightness)
You need to allow adb shell to get root access or the command will throw an error. Your phone should show a confirmation dialog when entering the command. If it doesn't show the dialog, open Magisk Manager app and give root access for Shell in Superuser menu.
25. Enjoy!
Can you please help me have magisk in official rom or stock rom?
DebrupGhosh said:
Can you please help me have magisk in official rom or stock rom?
Click to expand...
Click to collapse
For Magisk on stock Rom:
Your bootloader must be unlocked already!
1. Flash patched boot.img & recovery.img via fastboot
2. Reboot to TWRP
3. In TWRP, go to Wipe > Format Data > "yes"
4. In TWRP, flash Magisk zip
5. Reboot to System
Note: You will lose all your data on the phone. Do a backup of your personal stuff before proceeding.
cg730620 said:
For Magisk on stock Rom:
1. Flash patched boot.img & recovery.img via fastboot
2. Reboot to TWRP
3. In TWRP, go to Wipe > Format Data > "yes"
4. In TWRP, flash Magisk zip
5. Reboot to System
Note: You will lose all your data on the phone. Do a backup of your personal stuff before proceeding.
Click to expand...
Click to collapse
trying the same with miui 11.0.2 indian with repeated reboots and the files on internal storage gets encrypted or something like that.(patched boot image via patcher tool you shared)
after flashing no verity opt encrypt the android sign on boot animation is now showing but this time screen turns off and on
even tried flashing vbmeta.img
DebrupGhosh said:
trying the same with miui 11.0.2 indian with repeated reboots and the files on internal storage gets encrypted or something like that.
after flashing no verity opt encrypt the android sign on boot animation is now showing but this time screen turns off and on
even tried flashing vbmeta.img
Click to expand...
Click to collapse
Did you unlock your bootloader? It must be unlocked before flashing anything.
cg730620 said:
Did you unlock your bootloader? It must be unlocked before flashing anything.
Click to expand...
Click to collapse
Of course i did
WiFi is not working
cg730620 said:
Hello,
I finally managed to install a custom GSI Rom with TWRP and Magisk on my Redmi 7A. And I want to share a detailed guide for everyone who is struggling to do the same. Tested with MIUI 10.2.5.0 Global. Cannot guarantee for other versions.
WARNING:
You need to backup your data before installing. I am not responsible for any damage or loss that might occur. Proceed at your own risk.
Prerequisites:
- Your bootloader must be unlocked (https://en.miui.com/unlock/)
- GSI Rom of your choice. Only a64 A/B (arm32_binder64_ab). No other GSIs will do.
- ADB and Fastboot
- patched boot.img
- TWRP recovery
- vbmeta.img
- Magisk
- Permissiver_v4.zip
- Certification patch
- Treble Overlay file
- GApps (if needed)
Installation guide:
1. Download the files.
GSI Rom:
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
I installed Lineage OS 16 GSI (lineage-16.0-20191017-UNOFFICIAL-treble_a64_bvN). Everything works, except for auto-brightness.
https://forum.xda-developers.com/pr...i-lineageos-16-0-gsi-arm64-ab-how-to-t3908029
Minimal ADB and Fastboot
https://forum.xda-developers.com/showthread.php?t=2317790
Patched boot img file
(You have to choose the correct file according to your system version!)
http://www.mediafire.com/folder/zx0167qqaknc3/Redmi_7a_patched_boot
TWRP recovery
https://www.mediafire.com/file/irntn5ccdiguuuu/TWRP-20191023-3.3.1.0-pine.img/file
vbmeta file
http://www.mediafire.com/file/bgpn9b87b4t8yye/vbmeta.img/file
Magisk
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Permissiver
http://www.mediafire.com/file/61q8wln4y18ir5k/Permissiver_v4.zip/file
Certification Patch
http://www.mediafire.com/file/fboh2jocqak8cep/Certification_Patch.zip/file
Treble Overlay file (treble-overlay-xiaomi-redmi7a.apk)
http://www.mediafire.com/file/yc7vz3vg13mcrck/treble-overlay-xiaomi-redmi7a.apk/file
GApps (for Lineage OS 16 GSI choose 'ARM' & '9.0')
https://opengapps.org/
2. Unpack Minimal ADB and Fastboot to C:\ drive of your PC
3. Rename patched boot file to boot.img
4. Rename custom recovery file to recovery.img
5. Place boot.img, recovery.img, vbmeta.img in ADB folder
6. Turn off your phone.
7. Reboot phone to fastboot mode by holding Volume-down button while pressing On/Off-button. You know you are in fastboot mode when you see a cartoon bunny.
8. Connect the phone to your PC via USB.
9. On your PC open command prompt and nagivate to ADB folder, or open command prompt window directly from right-click menu in ADB folder; just right-click on empty space and choose 'Open command prompt here'
10. In command prompt, enter the following commands:
Code:
fastboot flash boot boot.img
Code:
fastboot flash vbmeta vbmeta.img
Code:
fastboot flash recovery recovery.img
11. Now reboot to recovery: Press Volume-Up button on your phone and enter the following in command prompt:
Code:
fastboot reboot
or just turn off the phone and reboot by holding Volume-Up and On/Off button (release On/Off when phone turns on, keep holding Volume-Up until you see screen of TWRP recovery)
12. Swipe to allow modifications. If TWRP asks for PIN, enter the PIN code you set for your unlock screen.
13. In TWRP choose Wipe > Advanced Wipe. Select 'Dalvik / ART cache', 'System', 'Data', 'Cache'. Then Swipe to Wipe.
14. Move the downloaded GSI file (*.img) to your phone. (Simply drag and drop in your PC's file manager to SD-card/memory of phone).
15. Flash the GSI Rom: In TWRP choose 'Install' > 'Install Image' and select the GSI. If you put the GSI on your external SD-card you first need to choose Select Storage > Micro SD card. After choosing the GSI file, at Select Partition to Flash Image choose System Image. Then Swipe to confirm Flash.
16. Reboot to Recovery
17. Move Magisk zip and Permissiver_v4.zip to your phone.
18. In TWRP choose Install. Select the Magisk zip-file on your phone and then Swipe to confirm flash.
19. Flash Permissiver_v4.zip the same way.
20. Flash GApps if needed
21. Flash Certification_Patch.zip.
22. Go back and choose Reboot > System
23. Fix big rounded corners on home screen:
Once you are in Android and in case you experience big ugly round corners around your home screen, put treble-overlay-xiaomi-redmi7a.apk in System > Overlay directory. You need a file manager with root access if you want to do this from within Android.
24. Fix brightness adjustment issue (no auto-brightness though):
Enable USB debugging in Developer Options menu. To make developer menu appear in Android, you need to tap 7 times on Android's 'build number'.
Now open command prompt from ADB folder on your PC while your phone is still connected via USB. Enter the following:
Code:
adb shell
su
setprop persist.sys.qcom-brightness $(cat /sys/class/leds/lcd-backlight/max_brightness)
You need to allow adb shell to get root access or the command will throw an error. Your phone should show a confirmation dialog when entering the command. If it doesn't show the dialog, open Magisk Manager app and give root access for Shell in Superuser menu.
25. Enjoy!
Click to expand...
Click to collapse
I have followed every step. The wifi is not even turning on. I know there must be some small bug. Please help me clear it!
cg730620 said:
Patched boot img file
(You have to choose the correct file according to your system version!)
Click to expand...
Click to collapse
Somehow there is ver 10.2 and 10.4 missing 10.3 which is the one which I have.
What should I do?
Thanks very much for the detailed instructions!
I got it working with lineage-17-arm
Got the beta opengapps from...
https://sourceforge.net/projects/opengapps/
Before copying the treble-overlay-xiaomi-redmi7a.apk file, I had to type...
chmod a+r treble-overlay-xiaomi-redmi7a.apk
mount -o rw,remount /
I followed the steps, and i got stuck on Redmi Logo, My bootloader is unlocked.
Tried to install 2 ROMs without success.
In the second ROM (Lineage 17) when i tried to install gapps, it gave me an error saying insufficient space.
i had to get back to Miui.
Josseda673 said:
I followed the steps, and i got stuck on Redmi Logo, My bootloader is unlocked.
Tried to install 2 ROMs without success.
In the second ROM (Lineage 17) when i tried to install gapps, it gave me an error saying insufficient space.
i had to get back to Miui.
Click to expand...
Click to collapse
Before installing gapps, after installing the rom. Go to TWRP > wipe > "system" > repair > resize fs > reboot. Then install gapps.
It didn't boot after I installed gapps on lineage 16, but it was ok on lineage 17.
Redmi 7A Miui 10.3 Patcher file missing?
Does anyone know where I could find patched file for Miui 10.3, because there is only for ver 10.2 and 10.4, and I can't update miui on my phone that's why I'm asking. Thanks.
in TWRP, after instaling the ROM and trying to install gaps, or whatever I get:
Failed to mount '/system_root' (invalid argument)
I also can't mount system partition in mounting options.
What does it means?
.
After installing TWRP successfully I tried with both roms: lineage-16.0-20191017-UNOFFICIAL-treble_a64_bvN and lineage-17.0-20191117-UNOFFICIAL-treble_a64_bvN
it fails to install any apps (Magisk, permissiver, G-Apps, etc.).
Example from Magisk:
- Mounting /system
! Cannot mount /system
- Unmounting partition
...
Failed to mount "system/root" (invalid argument)
When I now try to reboot again into Recovery TWRP says "No OS Installed".
any help is appreciated!
Same
Hello!,
it's possible with MIUI 11 (PCMINXM) ? or i need to roll back to MIUI10?
Camera records corrupted videos
Any idea how to make camera record videos? Photos work, but when I try to record videos, it seems to be recording, but when I try to play it back it seems corrupted (e.g.: showing length of the video to be over 104h long - so seems like indexing problem). Tried to play with camera_config.xml at root/vendor/etc/camera but no luck so far... :crying:
P.S.: The problem seems to be independent of the app used - Open Camera with Camera2 API enabled does not change a thing.
---------- Post added at 09:16 PM ---------- Previous post was at 09:11 PM ----------
shr!pad said:
Hello!,
it's possible with MIUI 11 (PCMINXM) ? or i need to roll back to MIUI10?
Click to expand...
Click to collapse
Worked for me when flashing from Miui 11 EU - just followed the instructions with little problems.
Blazer291 said:
Any idea how to make camera record videos? Photos work, but when I try to record videos, it seems to be recording, but when I try to play it back it seems corrupted (e.g.: showing length of the video to be over 104h long - so seems like indexing problem). Tried to play with camera_config.xml at root/vendor/etc/camera but no luck so far... :crying:
P.S.: The problem seems to be independent of the app used - Open Camera with Camera2 API enabled does not change a thing.
Same thing with mine, first time i did solve it installing gapps again, but a few days later the problem got back. I´m about to update to last firmware and see if it solves the issue, ill comment later.
Click to expand...
Click to collapse
Same thing with mine, first time i did solve it installing gapps again, but a few days later the problem got back. I´m about to update to last firmware and see if it solves the issue, ill comment later.
Click to expand...
Click to collapse
Don't do that - it's too much work.
Fixed mine by editing camera_config.xml so it has only the config for the model and vendor of the camera that it actually has been fitted with. Now using Open Camera with Camera2 API everything works fine. :victory:
P.S.: So the cause of the problem really seems to be the conflict of different camera configs within the configuration file.
brother please! can you tell me how to do it? like a mini guide, i dont have magisk nor root on my phone. do i need to root it?
would appriciate it so much!!
Well, a lot of people wanting to root global miui 11.0.7 and not being able to... So I did it on my Global redmi 7a - MIUI 11.0.7 Global.
Simple though. Apart from whats being said, u can update Magisk to v20.+ after flashing
the 19 version, through the app Magisk Manager automatically installed after flashing.
Prerequisites & Downloads:
- Your bootloader must be unlocked (https://en.miui.com/unlock/)
- ADB and Fastboot -> I did on windows version, maybe can be done on linux...
- patched boot.img for miui 11.0.7 global
- vbmeta.img
- Magisk v19.3 zip -> place it on the root of your external sdcard
This is basically copied from cg730620's post [Guide][Redmi 7A] TWRP, Root with Magisk, Custom ROM [GSI][Pie] and Avedroid's vid
1 - Unlock bootloader and flash stock miui 11.0.7 recovery rom, using miflash 2017
CAREFUL! On the lower right corner check the first option, "clean all", or you may end up with a locked bootloader.
-> exactly the same from the quoted post from now on, what differs is the files and we are only flashing magisk v19.3
"2. Install Minimal ADB and Fastboot
3. Rename patched boot file to boot.img
4. Rename custom recovery file to recovery.img
5. Place boot.img, recovery.img, vbmeta.img in Program Files (x86)/Minimal ADB and Fastboot/ folder
6. Turn off your phone.
7. Reboot phone to fastboot mode by holding Volume-down button while pressing On/Off-button. You know you are in fastboot mode when you see a cartoon bunny.
8. Connect the phone to your PC via USB.
9. On your PC open command prompt and nagivate to ADB folder, or open command prompt window directly from right-click menu in ADB folder; just right-click on empty space and choose 'Open command prompt here'
10. In command prompt, enter the following commands:
Code:
Code:
fastboot flash boot boot.img
Code:
Code:
fastboot flash vbmeta vbmeta.img
Code:
Code:
fastboot flash recovery recovery.img
11. Now reboot to recovery: Press Volume-Up button on your phone and enter the following in command prompt:
or just turn off the phone and reboot by holding Volume-Up and On/Off button (release On/Off when phone turns on, keep holding Volume-Up until you see screen of TWRP recovery)
12. Swipe to allow modifications. If TWRP asks for PIN, enter the PIN code you set for your unlock screen.
13. In TWRP choose Wipe > Advanced Wipe. Select 'Dalvik / ART cache', 'System', 'Data', 'Cache'. Then Swipe to Wipe.
18. In TWRP choose Install. Select the Magisk zip-file on your phone and then Swipe to confirm flash.
Reboot to system, open Magisk, update and there u go.
Same steps of the beginning of Avedroid's video, only with modified boot.img and Magisk Version
https://www.youtube.com/watch?v=NSs08O6uGVI&t=324s
After 16:30 of the video he flashes a custom gsi rom which is not of the interest of this thread, just flash magisk.
Thanks to all who made it possible, especially Avedroid and cg730620
Post questions and answers here, please, NOT in PM.
Good luck!
Thank's it's work fine on custom gsi too, i just flash patch boot, vbmeta, finally install magisk success
I did everything right, however, when it came to installing Magisk, the following error occurred: "Updater process ended with ERROR: 1".
So I redid the whole process, but before installing Magisk I did the following: I went to Mount, I deselected the System partition and after that the installation proceeded normally.
Well, I don’t know if this is the best way to fix this problem, I don’t understand much of these things, but it ended up working for me.
Thanks for the post
I will do some tests to see if everything is working.
Can I just do this on MIUI 11.0.5 Global?
Omborkar said:
Can I just do this on MIUI 11.0.5 Global?
Click to expand...
Click to collapse
Download patched boot.img for ur rom instead of 11.0.7 boot.img I uploaded. Or patch it yourself.
I have a problem. Everytime I do the wipe it says only: "Failed to mount "vendor"(invalid argument)"
What to do?
Google play not certified... after flashing and installed magisk... Got solution??? Thanks
I've rooted my MoKee OS Android 10 rom. Can somebody help me change the system font? The font changer module in Magisk is not appearing in the search bar.
vincecabalan said:
I've rooted my MoKee OS Android 10 rom. Can somebody help me change the system font? The font changer module in Magisk is not appearing in the search bar.
Click to expand...
Click to collapse
I Tried To Root Mokee But Failed. Can You Please Tell Me How You Root Mokee
Hello, what files do I need to rename to boot.img and recovery.img? I'm lost
3. Rename the patched boot file to boot.img
4. Rename the custom recovery to recovery.img
RsAbubokor4 said:
I Tried To Root Mokee But Failed. Can You Please Tell Me How You Root Mokee
Click to expand...
Click to collapse
Extract boot.img of installer mokee.zip Patch boot image https://patcher.yaalex.xyz/ select include magisk Expect to do uploud after downloading rename boot.img sdcard Go twrp flash boot install magisk manager apk
Credit to @idcamper
vincecabalan said:
Extract boot.img of installer mokee.zip Patch boot image https://patcher.yaalex.xyz/ select include magisk Expect to do uploud after downloading rename boot.img sdcard Go twrp flash boot install magisk manager apk
Credit to @idcamper
Click to expand...
Click to collapse
I did according to this advice, uploaded boot.img to this site. Magisk works, but Wifi won't work . When I uploaded boot.img, Wifi works, then it shows that Magisk is not installed, but it was installed.
speed_cars said:
I did according to this advice, uploaded boot.img to this site. Magisk works, but Wifi won't work . When I uploaded boot.img, Wifi works, then it shows that Magisk is not installed, but it was installed.
Click to expand...
Click to collapse
try this process after flash zip of the last magisk from reset factory
Can i do this on miui 11.0.3.0 indian rom based on Android 10. If yes then i need recovery.img pls help.
4. Rename custom recovery file to recovery.img
- where i can download this?, or this is the outcome of step 1?
Everything works fine, exept password. When i set new password, let's say it is 1234, i set the password in the setting, then i press the power button for lock screen, i put the password in as usual, but it just says try again over and over, im pretty sure that it is not my fault. Thanks for reply.
Anyone have patched boot 11.0.4?
jurubebaamarga said:
Well, a lot of people wanting to root global miui 11.0.7 and not being able to... So I did it on my Global redmi 7a - MIUI 11.0.7 Global.
Simple though. Apart from whats being said, u can update Magisk to v20.+ after flashing
the 19 version, through the app Magisk Manager automatically installed after flashing.
Prerequisites & Downloads:
- Your bootloader must be unlocked (https://en.miui.com/unlock/)
- ADB and Fastboot -> I did on windows version, maybe can be done on linux...
- patched boot.img for miui 11.0.7 global
- vbmeta.img
- Magisk v19.3 zip -> place it on the root of your external sdcard
This is basically copied from cg730620's post [Guide][Redmi 7A] TWRP, Root with Magisk, Custom ROM [GSI][Pie] and Avedroid's vid
1 - Unlock bootloader and flash stock miui 11.0.7 recovery rom, using miflash 2017
CAREFUL! On the lower right corner check the first option, "clean all", or you may end up with a locked bootloader.
-> exactly the same from the quoted post from now on, what differs is the files and we are only flashing magisk v19.3
"2. Install Minimal ADB and Fastboot
3. Rename patched boot file to boot.img
4. Rename custom recovery file to recovery.img
5. Place boot.img, recovery.img, vbmeta.img in Program Files (x86)/Minimal ADB and Fastboot/ folder
6. Turn off your phone.
7. Reboot phone to fastboot mode by holding Volume-down button while pressing On/Off-button. You know you are in fastboot mode when you see a cartoon bunny.
8. Connect the phone to your PC via USB.
9. On your PC open command prompt and nagivate to ADB folder, or open command prompt window directly from right-click menu in ADB folder; just right-click on empty space and choose 'Open command prompt here'
10. In command prompt, enter the following commands:
Code:
Code:
fastboot flash boot boot.img
Code:
Code:
fastboot flash vbmeta vbmeta.img
Code:
Code:
fastboot flash recovery recovery.img
11. Now reboot to recovery: Press Volume-Up button on your phone and enter the following in command prompt:
or just turn off the phone and reboot by holding Volume-Up and On/Off button (release On/Off when phone turns on, keep holding Volume-Up until you see screen of TWRP recovery)
12. Swipe to allow modifications. If TWRP asks for PIN, enter the PIN code you set for your unlock screen.
13. In TWRP choose Wipe > Advanced Wipe. Select 'Dalvik / ART cache', 'System', 'Data', 'Cache'. Then Swipe to Wipe.
18. In TWRP choose Install. Select the Magisk zip-file on your phone and then Swipe to confirm flash.
Reboot to system, open Magisk, update and there u go.
Same steps of the beginning of Avedroid's video, only with modified boot.img and Magisk Version
After 16:30 of the video he flashes a custom gsi rom which is not of the interest of this thread, just flash magisk.
Thanks to all who made it possible, especially Avedroid and cg730620
Post questions and answers here, please, NOT in PM.
Good luck!
Click to expand...
Click to collapse
I wish to obtain root / access to magisk,
Wanting to know if I can do this without losing data (having to delete system data)
Thank you
Hello.
So I was trying to root my Redmi 7A - v10.2.1 with TWRP 3.3.1 but now I am stuck in a bootloop.
What I did:
1. Flash boot.img
2. Flash recovery.img
3. Flash vbmeta.img
4. reboot
Phone rebooted to system and TWRP was installed.
Then I booted to TWRP to install Magisk-v23.0.zip,
I went to Advanced Wipe, then wiped 'Dalvik / ART cache', 'System', 'Data', 'Cache'.
When I rebooted, it went into a bootloop, when I go to TWRP it says 'No OS INSTALLED".
What did I do wrong? And how to recover?
Thanks.
Cinox said:
I did everything right, however, when it came to installing Magisk, the following error occurred: "Updater process ended with ERROR: 1".
So I redid the whole process, but before installing Magisk I did the following: I went to Mount, I deselected the System partition and after that the installation proceeded normally.
Well, I don’t know if this is the best way to fix this problem, I don’t understand much of these things, but it ended up working for me.
Thanks for the post
I will do some tests to see if everything is working.
Click to expand...
Click to collapse
Im also getting the same error,, but what do you mean by "deselected the System partition". I see "system_root" in Mount but not "System"
I was trying to root my phone via twrp and wiped it. i can access twrp and fast boot is there a way to reinstall miui or something else so that my phone will work again?
I'll paypal the person that helps me first
You can't restore anything since you did a wipe.
If you wiped data. Your miui will restore just reboot to system.
But your data gone.
Did you wipe internal (system) too ?
If that soo you need to use fastboot tool for miui fastboot rom
Abdullah.Csit said:
You can't restore anything since you did a wipe.
If you wiped data. Your miui will restore just reboot to system.
But your data gone.
Did you wipe internal (system) too ?
If that soo you need to use fastboot tool for miui fastboot rom
Click to expand...
Click to collapse
was following this:
1. format data
2. wipe data, cache, dalvik cache, internal storage
3. plug phone to pc
3.1. go to mount: select system additionally, unmount and mount again
4. go to device manager right click on unknow MTP device and update driver-> browse my computer -> let me pick from a list -> select MTP USB Device and finish installation
5. Your device should be visible, copy rom to phone, unplug it from the pc and flash rom
but i did something wrong and now i can only boot into twrp and fastboot
s0tix said:
was following this:
1. format data
2. wipe data, cache, dalvik cache, internal storage
3. plug phone to pc
3.1. go to mount: select system additionally, unmount and mount again
4. go to device manager right click on unknow MTP device and update driver-> browse my computer -> let me pick from a list -> select MTP USB Device and finish installation
5. Your device should be visible, copy rom to phone, unplug it from the pc and flash rom
but i did something wrong and now i can only boot into twrp and fastboot
Click to expand...
Click to collapse
Your wrong is "Wiping internal storage"
In that case, you must download Miui stock rom "Fastboot type not recovery type"
Then use Mi flash Tool latest to flash fastboot rom.
1. Download this rom "Fastboot 4.7 GB" from here :
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
2. Download Mi flash Tool:
https://www.xiaomiflash.com/downloads/MiFlash20181115.zip
3. Extract fastboot rom file .tgz to "C" disk then extract one more time the .zip file in same location "C://" then you get folder with rom build number and name.
4. Open Mi flash Tool , select Rom folder that we had extracted it.
5. Boot to fastboot mode & Connect your device.
6. Hit refresh so you will find your device name.
7. Check erase all data box without lock!
8. Click flash and wait till your device boot to MIUI.
Abdullah.Csit said:
Your wrong is "Wiping internal storage"
In that case, you must download Miui stock rom "Fastboot type not recovery type"
Then use Mi flash Tool latest to flash fastboot rom.
1. Download this rom "Fastboot 4.7 GB" from here :
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
2. Download Mi flash Tool:
https://www.xiaomiflash.com/downloads/MiFlash20181115.zip
3. Extract fastboot rom file .tgz to "C" disk then extract one more time the .zip file in same location "C://" then you get folder with rom build number and name.
4. Open Mi flash Tool , select Rom folder that we had extracted it.
5. Boot to fastboot mode & Connect your device.
6. Hit refresh so you will find your device name.
7. Check erase all data box without lock!
8. Click flash and wait till your device boot to MIUI.
Click to expand...
Click to collapse
The flash tool you linked has a password
Abdullah.Csit said:
Your wrong is "Wiping internal storage"
In that case, you must download Miui stock rom "Fastboot type not recovery type"
Then use Mi flash Tool latest to flash fastboot rom.
1. Download this rom "Fastboot 4.7 GB" from here :
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
2. Download Mi flash Tool:
https://www.xiaomiflash.com/downloads/MiFlash20181115.zip
3. Extract fastboot rom file .tgz to "C" disk then extract one more time the .zip file in same location "C://" then you get folder with rom build number and name.
4. Open Mi flash Tool , select Rom folder that we had extracted it.
5. Boot to fastboot mode & Connect your device.
6. Hit refresh so you will find your device name.
7. Check erase all data box without lock!
8. Click flash and wait till your device boot to MIUI.
Click to expand...
Click to collapse
Thanks! found a download for the tool and followed the steps and now its working!
s0tix said:
Thanks! found a download for the tool and followed the steps and now its working!
Click to expand...
Click to collapse
Glad that I had helped you.
Are you buying me a coffee or not
If you reside in norway i would happily take you out for lunch
Magisk VariantStable / Beta / CanaryReleaseOfficialAndroid / OOSOOS 11 and aboveMaintainertopjohnwuProject LinkGitHubZygiskNoDenyListNoMagiskHideYesModules RepoYesDownload LinkGitHub
This tutorial will :
provide you with all the steps to root your Oneplus 10 Pro (with your bootloader already unlocked)
provide you with all the steps to unlock your Oneplus 10 Pro bootloader
provide you with all the steps to keep root during/after an OTA (system update)
provide you with a lot tricks if you have troubleshooting questions
provide you with a lot of solutions of you have softbricked your Oneplus 10 Pro
provide you with all the ways if you want to bring back your Oneplus 10 Pro to unroot & lock back the bootloader
STEPS to root your device:
I recommand to update first your device with all OTA available using Settings/updates before unlocking & rooting it.
Root your Oneplus 10 Pro (with Bootloader already unlocked)Step 1 - Booting temporarily root1. Connect your phone to your pc and boot it into fastboot mode. You can leave it connected throughout this guide.
2. First, enter the following command in the PowerShell/Terminal window to ensure that your PC can communicate with the phone over the fastboot interface.
"fastboot devices"
The command should return your phone’s unique ID. In case it doesn’t, then make sure that you have the required USB drivers installed and restart your PC. You can also use TOOL ALL IN ONE, not officially updated to Oneplus 10 Pro but once install go to Others options and go to Install drivers.
3. Code once in fastboot mode:
"fastboot boot magisk_boot.img" (use the "magisk_boot.img" from the above zip file)
Change to the exact name "magisk_boot.img" of the boot that has been patched in the above zip file
"fastboot reboot"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You could flash this boot.img, but it's safer to temporarily boot from it without overwriting your existing image in case anything went wrong along the way. The effect is that you still get root access without modifying your device, and then you can use the much safer Magisk direct install option, which has some safeguards in place.
By booting with the patched image, you now have temporary root access. To make it permanent open Magisk app.
a. Select the Install option.
b. Use Direct Install (Recommended) to root your internal boot.img
Step 2 - Reboot and your device is now rooted !Unlock the Bootloader and Root the OnePlus 10 ProStep 1 – Enable OEM unlockingYou need to enable OEM unlocking, which can be done by enabling the developer settings on your device. To do so, go to Settings > About phone and repeatedly tap Build number. Developer options will then be added to your system settings, where you can then enable OEM unlocking.
Step 2 – Unlock your phone
Set up adb, reboot into your bootloader, and run the following command. Yes, it’s really that simple!
"fastboot oem unlock"
You can reboot into the bootloader by switching on USB debugging, setting up adb and fastboot and typing “adb reboot bootloader”. Alternatively, you can hold volume down and the power button to boot up your device. USB debugging is also located under the developer options.
Unlocking the bootloader wipes your device :
Step 3 - Booting temporarily root1. Connect your phone to your pc and boot it into fastboot mode. You can leave it connected throughout this guide.
2. First, enter the following command in the PowerShell/Terminal window to ensure that your PC can communicate with the phone over the fastboot interface.
"fastboot devices"
The command should return your phone’s unique ID. In case it doesn’t, then make sure that you have the required USB drivers installed and restart your PC. You can also use TOOL ALL IN ONE, not officially updated to Oneplus 10 Pro but once install go to Others options and go to Install drivers.
3. Code once in fastboot mode:
"fastboot boot magisk_boot.img" (use the "magisk_boot.img" from the above zip file)
Change to the exact name "magisk_boot.img" of the boot that has been patched in the above zip file
"fastboot reboot"
You could flash this boot.img, but it's safer to temporarily boot from it without overwriting your existing image in case anything went wrong along the way. The effect is that you still get root access without modifying your device, and then you can use the much safer Magisk direct install option, which has some safeguards in place.
Step 4 - Install magiskInstall the latest Magisk Canary apk on your phone. Open it and:
a. Select the Install option.
b. Use Direct Install (Recommended) to root your internal boot.img
Step 5 - Reboot and your device is now rooted !Keep Root and OTA updatesHow to update OTA and KEEP ROOT
It is advised to disable or even uninstall all magisk modules to be safe!
How: go to Magisk application/modules/disable &/or uninstall
Option 1: With full OTA Access (BA/DA) :
Step 1 - Get & install the full OTA zip file1. Go to System-Update or update get the OTA using Oxygen Updater
2. Tap OK when the message that you are rooted appears
3. Tap "Download and install" or local update if OTA from Oxygen Updater
4. Wait until you are prompted to reboot - DO NOT REBOOT NOW!
5. Open Magisk Manager
a. Select the Install option.
b. Use Install to inactive slot
Step 2 - Reboot and enjoy your device still rooted with latest OTA installed !Option 2: with incremental OTA Access (AA) :Step 1 - Get back your original boot image1. open the Magisk Manager application, select “Uninstall”, and choose the “Restore Images” option. Magisk will restore your phone’s stock boot image that was backed up during the rooting process.
2. Now go to “Settings” → “System” → “System updates” and select “Download and Install Now” to install the OxygenOS OTA update on your rooted OnePlus 10 Pro
3. Open Magisk Manager
a. Select the Install option.
b. Use Install to inactive slot
Step 2 - Reboot and enjoy your device still rooted with latest OTA installed !
Troubleshooting questions :Before reporting any trouble, follow the steps below in order to have GooglePlay certified, keep L1 Widevine & pass CTS :
Step 1 - Magisk Settings1. Once rooted, in Magisk setting, select MagiskHide and Systemless host
2. In MagiskHide select GMS, Netflix, Google Store & any application you may find sensitive to Magisk detection
For Netflix, go to Settings, Appplications & select Netflix:
a-force stop the app
b-clear cache and storage
c-hide the App in magisk
d-restart phone to recovery and clear cache
If you can't install/update Netflix install the latest Netflix from apkmirror manually (like any other apk file)
Hide everything under Google play services and store.:
3. Reboot
Step 2 - Clear cachesClear caches of Google Play Service & Play Store
Go to Settings, Applications & select Google Play Service, delete data
Go to Settings, Appplications & select Play Store, delete data
Step 3 - Clear cache from RecoveryReboot into Recovery and select wipe CACHE. Recovery boot to be activated from Settings/System/developpers options/advanced restart. Once in Recovery select WIPE & WIPE CACHE Only !
Step 4 - Safetynet FixInstall Safetynet Fix Magisk Module
Phone Bricked ? :Five options (ranked from the easiest to tougher method):
Option 1 - Reboot to Safe mode & remove Magisk modulesOption A : Safe Mode
1. Hold power until it goes off
2. Boot and wait for the bootloader warning
3. Hold vol up and down until boot animation
4. Once it's booted just reboot again and you're done
Now on boot all magisk modules are disabled
Option B : thru adb command
1. Code with phone connected with USB debugging on (from developpers options):
"adb wait-for-device shell magisk --remove-modules"
2. reboot
Option 2 - Get back the original boot.imgIf your device can go to fastboot mode:
Flash back the original boot.img (w/o magisk) and reboot
Code once in fastboot mode:
"fastboot flash Original_boot.img" (use the "Original_boot.img" from the above zip file)
Change to the exact name "Original_boot.img" of the boot that has been posted in the above zip file
"fastboot reboot"
Option 3 - Flash back full OTA fileIf you can still go to Settings:
Flash back the OTA RUU full package and reboot
Option 4 - Change the active slotIf your device can go to fastboot mode:
"fastboot getvar current-slot"
This will tell you what (corrupted) slot you are currently booting from (either a or b).
Then just change to the other slot with the following command:
"fastboot --set-active=a"
or
"fastboot --set-active=b"
Then reboot with the command:
"fastboot reboot"
Option 5 - Wipe data in Recovery mode or fastboot commandOption A : If your device can still go to Recovery mode (ie thru fastboot mode: "fastboot reboot recovery")
From Recovery Wipe data and reboot
Option B :
Code once in fastboot mode:
"fastboot- w"
Option 6 - MSMIf none of the above works then go for MSM tool
Option 1 to 4 would normally not alter your personal data, applications and own set-up
Option 5 & 6 will wipe your personal data and applications
Return your phone to unlock and unroot? :Option 1 : Original Boot & relock with fastboot commandStep 1 - Restore orignal boot.imgOption A : Thru Magisk App
Open Magisk App on your phone. You will see the Uninstall button in the app. Just click on Uninstall button.
Then you need to click on Complete Uninstall. Your phone will be rebooted automatically.
Option B : Thru fastboot mode
Flash back the original boot.img (w/o magisk) and reboot
Code once in fastboot mode:
"fastboot flash Original_boot.img" (use the "Original_boot.img" from the above zip file)
Change to the exact name "Original_boot.img" of the boot that has been posted in the above zip file
"fastboot reboot"
Once booted, remove Magisk application
Option C : Flash the current or latest full OTA zip twice. Why twice, to ensure both slot have the latest update flashed with original boot.
Step 2 - Relock the bootloader1. Execute the following command to proceed for bootloader unlocking: "fastboot oem lock"
2. A verification window will appear on your mobile device asking to confirm the action. Just highlight “Relock Bootloader”using volume buttons and hit the power button to confirm.
3. The phone will initialize to relock the bootloader. It will take some time to reboot after resetting the whole phone into a locked stage.
4. Your device is now locked again !
Option 2 : MSM Tool MSM tool will relock your boaloader !Option 1 & 2 will wipe your personal data and applications
Do any process described at your own risk. None Xda none the author are responsible for your own choice to unlock & root your Device.
Attachments
OnePlus-8T-Rooting-fastboot-devices-command.jpg
15.9 KB · Views: 1,964
OnePlus-8T-Install-OTA-After-Rooting.jpg
62.9 KB · Views: 2,086
Decent.
Tbh though, looks like you just added pics to my one.
(Guide) Rooting, payload dumper, magisk_patched guides NE2213
Hi all, Thought i'd share a guide on how to get these boot images yourself as well as all the files required, plus the patched boot.img if you just want to go ahead and boot/flash it without obtaining one yourself Please read the process before...
forum.xda-developers.com
Even the categories look the same.
FYI, there is no MSM tool for the 10
dladz said:
Decent.
Tbh though, looks like you just added pics to my one.
(Guide) Rooting, payload dumper, magisk_patched guides NE2213
Hi all, Thought i'd share a guide on how to get these boot images yourself as well as all the files required, plus the patched boot.img if you just want to go ahead and boot/flash it without obtaining one yourself Please read the process before...
forum.xda-developers.com
Even the categories look the same.
FYI, there is no MSM tool for the 10
Click to expand...
Click to collapse
No MSM yet...
Steve0007 said:
No MSM yet...
Click to expand...
Click to collapse
No mate, fastboot enhance only, which has been hit and miss for most.
I haven't had to use it yet but seemingly it's the only option.
Hope things change but nothing yet
has old outdated info. If you flash, then you can't take ota updates.
Sorry, where is the magisk_boot.img file? I could not find it in this post.
Viewerisland said:
Sorry, where is the magisk_boot.img file? I could not find it in this post.
Click to expand...
Click to collapse
Please refer to this link. I personally used this approach with no issues
click me
use these steps to Unlock the bootloader... https://forum.xda-developers.com/t/root-oneplus-10-pro-color-os-oxygen-os.4401243/
after running through this post.. i would advise caution proceeding with the steps outlined ...
for OnePlus 10 Pro NE2213 & Ne 2215 ... you boot into Bootloader (adb reboot bootloader) and use ' fastboot flashing unlock ' to unlock the bootloader... NOT 'fastboot OEM unlock'
for my OnePlus 8T i would use 'fastboot oemunlock' ... not for the OnePlus10Pro
Steve0007 said:
Magisk VariantStable / Beta / CanaryReleaseOfficialAndroid / OOSOOS 11 and aboveMaintainertopjohnwuProject LinkGitHubZygiskNoDenyListNoMagiskHideYesModules RepoYesDownload LinkGitHub
This tutorial will :
provide you with all the steps to root your Oneplus 10 Pro (with your bootloader already unlocked)
provide you with all the steps to unlock your Oneplus 10 Pro bootloader
provide you with all the steps to keep root during/after an OTA (system update)
provide you with a lot tricks if you have troubleshooting questions
provide you with a lot of solutions of you have softbricked your Oneplus 10 Pro
provide you with all the ways if you want to bring back your Oneplus 10 Pro to unroot & lock back the bootloader
STEPS to root your device:
I recommand to update first your device with all OTA available using Settings/updates before unlocking & rooting it.
Root your Oneplus 10 Pro (with Bootloader already unlocked)Step 1 - Booting temporarily root1. Connect your phone to your pc and boot it into fastboot mode. You can leave it connected throughout this guide.
2. First, enter the following command in the PowerShell/Terminal window to ensure that your PC can communicate with the phone over the fastboot interface.
"fastboot devices"
The command should return your phone’s unique ID. In case it doesn’t, then make sure that you have the required USB drivers installed and restart your PC. You can also use TOOL ALL IN ONE, not officially updated to Oneplus 10 Pro but once install go to Others options and go to Install drivers.
3. Code once in fastboot mode:
"fastboot boot magisk_boot.img" (use the "magisk_boot.img" from the above zip file)
Change to the exact name "magisk_boot.img" of the boot that has been patched in the above zip file
"fastboot reboot"
You could flash this boot.img, but it's safer to temporarily boot from it without overwriting your existing image in case anything went wrong along the way. The effect is that you still get root access without modifying your device, and then you can use the much safer Magisk direct install option, which has some safeguards in place.
By booting with the patched image, you now have temporary root access. To make it permanent open Magisk app.
a. Select the Install option.
b. Use Direct Install (Recommended) to root your internal boot.img
Step 2 - Reboot and your device is now rooted !Unlock the Bootloader and Root the OnePlus 10 ProStep 1 – Enable OEM unlockingYou need to enable OEM unlocking, which can be done by enabling the developer settings on your device. To do so, go to Settings > About phone and repeatedly tap Build number. Developer options will then be added to your system settings, where you can then enable OEM unlocking.
Step 2 – Unlock your phone
Set up adb, reboot into your bootloader, and run the following command. Yes, it’s really that simple!
"fastboot oem unlock"
You can reboot into the bootloader by switching on USB debugging, setting up adb and fastboot and typing “adb reboot bootloader”. Alternatively, you can hold volume down and the power button to boot up your device. USB debugging is also located under the developer options.
Unlocking the bootloader wipes your device :
Step 3 - Booting temporarily root1. Connect your phone to your pc and boot it into fastboot mode. You can leave it connected throughout this guide.
2. First, enter the following command in the PowerShell/Terminal window to ensure that your PC can communicate with the phone over the fastboot interface.
"fastboot devices"
The command should return your phone’s unique ID. In case it doesn’t, then make sure that you have the required USB drivers installed and restart your PC. You can also use TOOL ALL IN ONE, not officially updated to Oneplus 10 Pro but once install go to Others options and go to Install drivers.
3. Code once in fastboot mode:
"fastboot boot magisk_boot.img" (use the "magisk_boot.img" from the above zip file)
Change to the exact name "magisk_boot.img" of the boot that has been patched in the above zip file
"fastboot reboot"
You could flash this boot.img, but it's safer to temporarily boot from it without overwriting your existing image in case anything went wrong along the way. The effect is that you still get root access without modifying your device, and then you can use the much safer Magisk direct install option, which has some safeguards in place.
Step 4 - Install magiskInstall the latest Magisk Canary apk on your phone. Open it and:
a. Select the Install option.
b. Use Direct Install (Recommended) to root your internal boot.img
Step 5 - Reboot and your device is now rooted !Keep Root and OTA updatesHow to update OTA and KEEP ROOT
It is advised to disable or even uninstall all magisk modules to be safe!
How: go to Magisk application/modules/disable &/or uninstall
Option 1: With full OTA Access (BA/DA) :
Step 1 - Get & install the full OTA zip file1. Go to System-Update or update get the OTA using Oxygen Updater
2. Tap OK when the message that you are rooted appears
3. Tap "Download and install" or local update if OTA from Oxygen Updater
4. Wait until you are prompted to reboot - DO NOT REBOOT NOW!
5. Open Magisk Manager
a. Select the Install option.
b. Use Install to inactive slot
Step 2 - Reboot and enjoy your device still rooted with latest OTA installed !Option 2: with incremental OTA Access (AA) :Step 1 - Get back your original boot image1. open the Magisk Manager application, select “Uninstall”, and choose the “Restore Images” option. Magisk will restore your phone’s stock boot image that was backed up during the rooting process.
2. Now go to “Settings” → “System” → “System updates” and select “Download and Install Now” to install the OxygenOS OTA update on your rooted OnePlus 10 Pro
3. Open Magisk Manager
a. Select the Install option.
b. Use Install to inactive slot
Step 2 - Reboot and enjoy your device still rooted with latest OTA installed !
Troubleshooting questions :Before reporting any trouble, follow the steps below in order to have GooglePlay certified, keep L1 Widevine & pass CTS :
Step 1 - Magisk Settings1. Once rooted, in Magisk setting, select MagiskHide and Systemless host
2. In MagiskHide select GMS, Netflix, Google Store & any application you may find sensitive to Magisk detection
For Netflix, go to Settings, Appplications & select Netflix:
a-force stop the app
b-clear cache and storage
c-hide the App in magisk
d-restart phone to recovery and clear cache
If you can't install/update Netflix install the latest Netflix from apkmirror manually (like any other apk file)
Hide everything under Google play services and store.:
3. Reboot
Step 2 - Clear cachesClear caches of Google Play Service & Play Store
Go to Settings, Applications & select Google Play Service, delete data
Go to Settings, Appplications & select Play Store, delete data
Step 3 - Clear cache from RecoveryReboot into Recovery and select wipe CACHE. Recovery boot to be activated from Settings/System/developpers options/advanced restart. Once in Recovery select WIPE & WIPE CACHE Only !
Step 4 - Safetynet FixInstall Safetynet Fix Magisk Module
Phone Bricked ? :Five options (ranked from the easiest to tougher method):
Option 1 - Reboot to Safe mode & remove Magisk modulesOption A : Safe Mode
1. Hold power until it goes off
2. Boot and wait for the bootloader warning
3. Hold vol up and down until boot animation
4. Once it's booted just reboot again and you're done
Now on boot all magisk modules are disabled
Option B : thru adb command
1. Code with phone connected with USB debugging on (from developpers options):
"adb wait-for-device shell magisk --remove-modules"
2. reboot
Option 2 - Get back the original boot.imgIf your device can go to fastboot mode:
Flash back the original boot.img (w/o magisk) and reboot
Code once in fastboot mode:
"fastboot flash Original_boot.img" (use the "Original_boot.img" from the above zip file)
Change to the exact name "Original_boot.img" of the boot that has been posted in the above zip file
"fastboot reboot"
Option 3 - Flash back full OTA fileIf you can still go to Settings:
Flash back the OTA RUU full package and reboot
Option 4 - Change the active slotIf your device can go to fastboot mode:
"fastboot getvar current-slot"
This will tell you what (corrupted) slot you are currently booting from (either a or b).
Then just change to the other slot with the following command:
"fastboot --set-active=a"
or
"fastboot --set-active=b"
Then reboot with the command:
"fastboot reboot"
Option 5 - Wipe data in Recovery mode or fastboot commandOption A : If your device can still go to Recovery mode (ie thru fastboot mode: "fastboot reboot recovery")
From Recovery Wipe data and reboot
Option B :
Code once in fastboot mode:
"fastboot- w"
Option 6 - MSMIf none of the above works then go for MSM tool
Option 1 to 4 would normally not alter your personal data, applications and own set-up
Option 5 & 6 will wipe your personal data and applications
Return your phone to unlock and unroot? :Option 1 : Original Boot & relock with fastboot commandStep 1 - Restore orignal boot.imgOption A : Thru Magisk App
Open Magisk App on your phone. You will see the Uninstall button in the app. Just click on Uninstall button.
Then you need to click on Complete Uninstall. Your phone will be rebooted automatically.
Option B : Thru fastboot mode
Flash back the original boot.img (w/o magisk) and reboot
Code once in fastboot mode:
"fastboot flash Original_boot.img" (use the "Original_boot.img" from the above zip file)
Change to the exact name "Original_boot.img" of the boot that has been posted in the above zip file
"fastboot reboot"
Once booted, remove Magisk application
Option C : Flash the current or latest full OTA zip twice. Why twice, to ensure both slot have the latest update flashed with original boot.
Step 2 - Relock the bootloader1. Execute the following command to proceed for bootloader unlocking: "fastboot oem lock"
2. A verification window will appear on your mobile device asking to confirm the action. Just highlight “Relock Bootloader”using volume buttons and hit the power button to confirm.
3. The phone will initialize to relock the bootloader. It will take some time to reboot after resetting the whole phone into a locked stage.
4. Your device is now locked again !
Option 2 : MSM Tool MSM tool will relock your boaloader !Option 1 & 2 will wipe your personal data and applications
Do any process described at your own risk. None Xda none the author are responsible for your own choice to unlock & root your Device.
Attachments
OnePlus-8T-Rooting-fastboot-devices-command.jpg
15.9 KB · Views: 1,964
OnePlus-8T-Install-OTA-After-Rooting.jpg
62.9 KB · Views: 2,086
Click to expand...
Click to collapse
I have read all text, i cant see if this are only for PC or if i can use whit Mac computer.
Do you know somethinhg about that?
lordxcom said:
use these steps to Unlock the bootloader... https://forum.xda-developers.com/t/root-oneplus-10-pro-color-os-oxygen-os.4401243/
after running through this post.. i would advise caution proceeding with the steps outlined ...
for OnePlus 10 Pro NE2213 & Ne 2215 ... you boot into Bootloader (adb reboot bootloader) and use ' fastboot flashing unlock ' to unlock the bootloader... NOT 'fastboot OEM unlock'
for my OnePlus 8T i would use 'fastboot oemunlock' ... not for the OnePlus10Pro
Click to expand...
Click to collapse
It would be great if somehow this (and other) corrections (such as where is the ZIP file that is referenced but not linked) were added to the instructions above. I spent an hour trying to figure out why "fastboot oem unlock" didn't work.
okay, tried updating my phone w/the steps mentioned above w/o, unfortunately disabling my Magisk modules
ended up in Qualcomm Crashdump mode...
I was able to restore back to slot a w/the following command:
fastboot --set-active=a
then used fastboot mode to boot to the following boot image (from this thread: https://forum.xda-developers.com/t/ne2215_11_c22-update.4524469/)
fastboot boot NE2215-C.22_boot_magisk25.2.img
this got me back up & running but I'm still stuck on C21
My question is, how do i upgrade to C22 now w/o losing data/root?