Database Develop

Losing root after a while?!

Hello folks!
I have a weird problem with my rooted OPX 3.1.3. I'm still using this version because Xposed is not yet officially supported with the november patch (last time I checked, it was being tested).
I haven't been able to successfully hide supersu and Xposed with Chainfire's SuperSU (even tough I think it's very good!). So, instead, I'm using PHH's SuperSU 266-2 with Magisk v9 (and Xposed 86.6). As expected, I can use Android Pay (by hiding it with Magisk Hide functionality), but after a while, I lose the root access... I don't know what to do to cause the problem, I just know it happens. So, I can't give you a step-by-step to reproduce it, which makes it more difficult to diagnose.
A reboot "fix" this, but it's kind of annoying. As this happened to someone else? What could cause this kind of problem?
Thanks and let me know if you need more info!

Remove magisk manager from greenfy-like apps, close the androidpay app after using anf if possible keep magisk manager opened worked for me

My setup is SuperSU 2.78 SR4, suhide, magisk v9, rootswitch 1.3.3.2 and PoGo and Android Pay works. I used the ramdisk patch. Root is never lost.

gamer765 said:
My setup is SuperSU 2.78 SR4, suhide, magisk v9, rootswitch 1.3.3.2 and PoGo and Android Pay works. I used the ramdisk patch. Root is never lost.
Click to expand...
Click to collapse
Um magisk thosent do anything in that case as supersu is independent from it and su hide is the only thing doing anything in that case

Majesty00 said:
Hello folks!
I have a weird problem with my rooted OPX 3.1.3. I'm still using this version because Xposed is not yet officially supported with the november patch (last time I checked, it was being tested).
I haven't been able to successfully hide supersu and Xposed with Chainfire's SuperSU (even tough I think it's very good!). So, instead, I'm using PHH's SuperSU 266-2 with Magisk v9 (and Xposed 86.6). As expected, I can use Android Pay (by hiding it with Magisk Hide functionality), but after a while, I lose the root access... I don't know what to do to cause the problem, I just know it happens. So, I can't give you a step-by-step to reproduce it, which makes it more difficult to diagnose.
A reboot "fix" this, but it's kind of annoying. As this happened to someone else? What could cause this kind of problem?
Thanks and let me know if you need more info!
Click to expand...
Click to collapse
The "losing root" problem with Magisk Hide is known and under investigation. I saw someone claiming that they didn't experience it anymore after doing a complete uninstall of Magisk and starting over. Otherwise, the only solution at the moment is to reboot the device or disable Magisk Hide.

Xmaster24 said:
Um magisk thosent do anything in that case as supersu is independent from it and su hide is the only thing doing anything in that case
Click to expand...
Click to collapse
I'm giving him an alternative that works where he doesn't lose root spontaneously and need to reboot to fix.

gamer765 said:
I'm giving him an alternative that works where he doesn't lose root spontaneously and need to reboot to fix.
Click to expand...
Click to collapse
But magisk in your alternative those nothing it's completely inactive, he would only find magisk useful if he was using another module but not xposed as superSU plus systemless xposed always leads to SN fail

Majesty00 said:
Hello folks!
I have a weird problem with my rooted OPX 3.1.3. I'm still using this version because Xposed is not yet officially supported with the november patch (last time I checked, it was being tested).
I haven't been able to successfully hide supersu and Xposed with Chainfire's SuperSU (even tough I think it's very good!). So, instead, I'm using PHH's SuperSU 266-2 with Magisk v9 (and Xposed 86.6). As expected, I can use Android Pay (by hiding it with Magisk Hide functionality), but after a while, I lose the root access... I don't know what to do to cause the problem, I just know it happens. So, I can't give you a step-by-step to reproduce it, which makes it more difficult to diagnose.
A reboot "fix" this, but it's kind of annoying. As this happened to someone else? What could cause this kind of problem?
Thanks and let me know if you need more info!
Click to expand...
Click to collapse
+1
I have same issue. I randomly loose root and I have no idea why. I hope someone can help.
I also will try to disable the magisk hide and see if it helps.

FlintStoned- said:
+1
I have same issue. I randomly loose root and I have no idea why. I hope someone can help.
I also will try to disable the magisk hide and see if it helps.
Click to expand...
Click to collapse
I am having the same problem, but am not using the Magisk hide feature. Have to reboot to restore root - very annoying!

I disabled battery optimization on magisk and super user so we'll see if these fixes it or not.
Edit: as long as magisk hide is on this doesn't seem to help. It's a bug with magisk hide apparently.

I have noticed this twice, and it seems to be related to having the phone die from low battery? This is the only common condition I can recognize with the last two times it has happened.

Revenge282 said:
I have noticed this twice, and it seems to be related to having the phone die from low battery? This is the only common condition I can recognize with the last two times it has happened.
Click to expand...
Click to collapse
This happens to my phone and it's not died from having low battery.

Link_of_Hyrule said:
This happens to my phone and it's not died from having low battery.
Click to expand...
Click to collapse
Yeah, I let it die last night with Magisk Hide off, so that certainly seems to be the issue. I kept root and other modules after I turned it back on.
But even with Magisk Hide on, I never experienced any issues unless the phone died. I had rebooted it a ton of times and never lost any modules. I'm convinced that it has something to do with a "ungraceful" reboot situation and how Magisk Hide must unload itself.

Maybe that's an issue as well but my phone if I pick it up after it's been sitting there and charging or a good amount of battery and try to use root it says there isn't root unless I restart.

The same issue with Magisk hide on Xiaomi Redmi Note 3 Pro
Sent from my Xiaomi Redmi Note 3 using XDA Labs

Started experiencing this on Nexus 6p stock NMF26F. Predominantly happening overnight.

tzortst said:
Started experiencing this on Nexus 6p stock NMF26F. Predominantly happening overnight.
Click to expand...
Click to collapse
Also facing this problem on Nexus 6 (nougat 7.0.1).
In addition to this, when ROOT is lost, Magisk Log is empty.
It happens whatever the day/hour... it just seems to happen after a few hours without using the phone.
- Phone never dead due to battery empty
- android pay DISABLED
- PokemonGO not installed
- Android installed from a Factory Image (november patch NBD91P)
- Magisk V9 + phh_root_r266-2 (the only module)
- magisk hide ENABLED + magisk busybox DISABLED + systemless hosts ENABLED
- greenify installed, but neither Magisk Manager nor SuperSU in the greenified applications

lebaud07 said:
Also facing this problem on Nexus 6 (nougat 7.0.1).
In addition to this, when ROOT is lost, Magisk Log is empty.
It happens whatever the day/hour... it just seems to happen after a few hours without using the phone.
- Phone never dead due to battery empty
- android pay DISABLED
- PokemonGO not installed
- Android installed from a Factory Image (november patch NBD91P)
- Magisk V9 + phh_root_r266-2 (the only module)
- magisk hide ENABLED + magisk busybox DISABLED + systemless hosts ENABLED
- greenify installed, but neither Magisk Manager nor SuperSU in the greenified applications
Click to expand...
Click to collapse
Magisk log is empty because the Magisk Manager can't access the cache folder where it's located (no root, remember ).
It's a known bug, probably due to Magisk Hide being a little too aggressive.

I've noticed that I lose root every time I open Magisk Manager, so I've decided to hide it from to app drawer & have Greenified it in an attempt to stop it from running at all after initial boot - will report back if it works or not.
Edit: so I rebooted and haven't opened the Magisk Manager app since last boot and haven't lost root yet, so, so far so good. (15hrs 30m uptime) - will update if I do.
Edit2: haven't lost root in 2 days now, so looks like a temporary fix?

enabling Magiskhide caused me to lose root

[Q?] Android Pay 7.1.x ROM with working root?

Hello, What is the rom with working android pay?
Pure Nexus - Doesnt work with magisk
Lineage doesnt work at all - rooted or not
Dirty Unicorns works, however apps crash.
Trying nitrogen os now
Any advice?
Thanks

.me said:
Hello, What is the rom with working android pay?
Pure Nexus - Doesnt work with magisk
Lineage doesnt work at all - rooted or not
Dirty Unicorns works, however apps crash.
Trying nitrogen os now
Any advice?
Thanks
Click to expand...
Click to collapse
Works for me with PureNexus and Magisk v12. Just make sure you turn on Magisk Hide.

liquidzoo said:
Works for me with PureNexus and Magisk v12. Just make sure you turn on Magisk Hide.
Click to expand...
Click to collapse
Tried a couple of times - worked with 11.x
I have no idea what I am doing wrong.

On latest Lineage with Franco Kernel + Magisk and passing safetynet. I have my card set up successfully with Android Pay but I haven't had a chance to actually test it, but I am definitely passing SN. Netflix shows up on Play Store as well.
I did a complete wipe, installed Lineage + Gapps, booted phone, then shut down phone and installed Franco Kernel, booted, shut down and then installed Magisk. I kept booting after flashes to check if Safetynet was being passed. It was not until I installed Magisk and used Magisk hide.

Google Strock Rom + ElementalX Kernel + Magisk 12.0 with suhide also works

.me said:
Tried a couple of times - worked with 11.x
I have no idea what I am doing wrong.
Click to expand...
Click to collapse
Don't enable Magisk busybox on Pure Nexus. There'll be a conflict with the ROM's busybox and it breaks Magisk Hide.
Because of issues like this (and others), busybox will no longer be included in Magisk starting with the next version.

Didgeridoohan said:
Don't enable Magisk busybox on Pure Nexus.
Click to expand...
Click to collapse
^This! Can confirm and I am running PN with Magisk, Android Pay works, Netflix appears in Playstore.

I've been using Android Pay with Pure Nexus & magisk for the past several months w/o any issues.

Didgeridoohan said:
Don't enable Magisk busybox on Pure Nexus. There'll be a conflict with the ROM's busybox and it breaks Magisk Hide.
Because of issues like this (and others), busybox will no longer be included in Magisk starting with the next version.
Click to expand...
Click to collapse
Thanks - I am beta testing v13 - hopefully it will work.
Cheers

Works with Dirty Unicorns / Magisk 12 .... I've noticed some form of weird volume issue where my volume lowers to reallllly low levels... so I'm looking for another ROM where it works and that has SmartBar Navigation customization.

Using PN latest ROM, with Magisk Hide enabled. Never had any problems, because it passes safety net every time

SafetyNet not passing on Magisk v12 OnePlus3T on 7.1.1

My oxygenOS version is 4.1.6, I installed Magisk with MagiskSU(topjohnwu) today but SafetyNet won't pass. I have MagiskHide enabled.
Any idea why?

Google updated SafetyNet so you're gonna have to use magisk core mode for now to pass safetynet

You can also switch to Magisk 13 which is currently passing for me without issues. I am no longer using any Magisk Modules as having those enabled was causing it to fail.

Or you can switch v13 beta to pass safetynet which is not stable yet

CJ-Wylde said:
You can also switch to Magisk 13 which is currently passing for me without issues. I am no longer using any Magisk Modules as having those enabled was causing it to fail.
Click to expand...
Click to collapse
Same

chazarss said:
Or you can switch v13 beta to pass safetynet which is not stable yet
Click to expand...
Click to collapse
Do I flash the beta directly or must I uninstall Magisk before and then install the beta?
Also, where can I find this beta?

Here is the link
Fredol7 said:
Do I flash the beta directly or must I uninstall Magisk before and then install the beta?
Also, where can I find this beta?
Click to expand...
Click to collapse
You can dirty flash the magisk v13 without uninstall the previous one but don't forget to update magisk manager app to v5.0.2 or the magisk v13 won't work
Here is the link
https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589

Fredol7 said:
My oxygenOS version is 4.1.6, I installed Magisk with MagiskSU(topjohnwu) today but SafetyNet won't pass. I have MagiskHide enabled.
Any idea why?
Click to expand...
Click to collapse
Enable Magisk core module in only in the magisk settings to pass the safety net check. this is a temporary fix.

The following module works for me: https://forum.xda-developers.com/apps/magisk/xiaomi-safetynet-fix-t3600431
Using Magisk v12, with other modules working (not just core mode) and it passes Safetynet.
The Safetynet fix does change the device fingerprint, so I think it will screw up (prevent) OTA updates. But you can simply disable the module when an update rolls out.

redpoint73 said:
The following module works for me: https://forum.xda-developers.com/apps/magisk/xiaomi-safetynet-fix-t3600431
Using Magisk v12, with other modules working (not just core mode) and it passes Safetynet.
The Safetynet fix does change the device fingerprint, so I think it will screw up (prevent) OTA updates. But you can simply disable the module when an update rolls out.
Click to expand...
Click to collapse
The actual fix doesn't need the fingerprint change. There's a modified version here that have those prop changing lines commented out.

Pass SafetyNet with Xposed?

I've been reading several threads here and in other forums as well, and I still not sure if this is possible at all, or it depends on the Xposed modules, etc.
I'm planning to do a clean install of the RR ROM, 6.0.1, try to remove all traces of root, then flash magisk and see if I can pass SafetyNet.
Does a custom kernel interfieres with that?
And if I pass it... any possibility to use Xposed (being active) and pass SafetyNet? Or at least hide it for problematic apps, like Netflix, or Mario Run?
Thanks in advance.

No, Xposed and SafetyNet is a no-go for now.
If you have a device, which ROM has security patches older than November 2016, you may try to use suhide along with Magisk and its MagiskHide, but no guarantees.

The ROM I plan to use is from september, you mean with suhide maybe SafetyNet could pass with Xposed enabled?
Thanks!

eXtremeDevil said:
I've been reading several threads here and in other forums as well, and I still not sure if this is possible at all, or it depends on the Xposed modules, etc.
I'm planning to do a clean install of the RR ROM, 6.0.1, try to remove all traces of root, then flash magisk and see if I can pass SafetyNet.
Does a custom kernel interfieres with that?
And if I pass it... any possibility to use Xposed (being active) and pass SafetyNet? Or at least hide it for problematic apps, like Netflix, or Mario Run?
Thanks in advance.
Click to expand...
Click to collapse
With Xposed Safetynet gone.
But you can use no device check module to pass ctsProfile True. But you can't anything about basicintegrity.
the ctsProfile in important. This mean you can play super Mario run or use Netflix in your device. But because of the basicintegrity you can't download or update this app from play store. You can download from apkmirror site.
Netflix and super Mario run in my phone.
Sent from my HTC U11 using Tapatalk

arianat said:
With Xposed Safetynet gone.
But you can use no device check module to pass ctsProfile True. But you can't anything about basicintegrity.
the ctsProfile in important. This mean you can play super Mario run or use Netflix in your device. But because of the basicintegrity you can't download or update this app from play store. You can download from apkmirror site.
Netflix and super Mario run in my phone.
Sent from my HTC U11 using Tapatalk
Click to expand...
Click to collapse
Let's see if I understood it correctly. Can I have custom ROM + Magisk + SuperSU + custom kernel + Xposed active and with this module I can use that kind of apps?
Thanks!

eXtremeDevil said:
Let's see if I understood it correctly. Can I have custom ROM + Magisk + SuperSU + custom kernel + Xposed active and with this module I can use that kind of apps?
Thanks!
Click to expand...
Click to collapse
Yes. I have custom kernel on ViperU 1.7 custom Rom in HTC U11
but I think you can't use superSu with magisk. You must use one of them. Why you want superSu? Magisk has superuser
Just install Xposed and install no device check module in Xposed installer
Sent from my HTC U11 using Tapatalk

arianat said:
Yes. I have custom kernel on ViperU 1.7 custom Rom in HTC U11
but I think you can't use superSu with magisk. You must use one of them. Why you want superSu? Magisk has superuser
Just install Xposed and install no device check module in Xposed installer
Sent from my HTC U11 using Tapatalk
Click to expand...
Click to collapse
I use an older Magisk that supports SuperSU. If I need newer Magisk for this to work, or if the module doesn't work with SuperSU, please let me know.
Thanks!

Best way really is root switch, requires reboot and disables xposed bit gets the job done.

kekistaneerefugee said:
Best way really is root switch, requires reboot and disables xposed bit gets the job done.
Click to expand...
Click to collapse
I don't want to be disabling Xposed and rebooting everytime...

eXtremeDevil said:
I use an older Magisk that supports SuperSU. If I need newer Magisk for this to work, or if the module doesn't work with SuperSU, please let me know.
Thanks!
Click to expand...
Click to collapse
The module worked with superuser and superSu
I tested
Sent from my HTC U11 using Tapatalk

Great, thanks, for now I will try MagiskSU. Just flashed ROM, removed su and SN passed. But installed boeffla kernel and not anymore. Is it normal? Can I avoid that? Gonna flash Magisk 13.3 now and check.
Thanks for everything guys!

Never mind, got SN again. But after installing Xposed systemless 87 I get bootloop Any idea why? Or is it really a very long boot? I have no Xposed modules at the time, just trying to boot it.
EDIT
Thanks to liveboot, I can see a boot error: Xposed: Can't find file.
Any clues???

Try install classic. If you don’t want disable xposed for pass basicintegrity , no need to install system less. Systemless xposed not active in my phone and I installed classic.
What’s your device? Do you wipe delvik & cache?

I flashed systemless Xposed from recovery and that did the trick.
If disabled, I pass SN. With the No device check module I pass cts profile.
But, Netflix does not work with that configuration. Maybe that app has extra checks? Thanks.
Sent from my ONE A2003 using Tapatalk

eXtremeDevil said:
I flashed systemless Xposed from recovery and that did the trick.
If disabled, I pass SN. With the No device check module I pass cts profile.
But, Netflix does not work with that configuration. Maybe that app has extra checks? Thanks.
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
What's do you mean extra configuration?
It's must work with pass ctsProfile. Just you can't update or download from play store.
Do you downloaded last version of Netflix for your device dpi and CPU architect from apkmirror?
Sent from my HTC U11 using Tapatalk

With Xposed disabled, and SafetyNet passing at 100%, Netflix says that my device is not compatible. Even installed from Google Play.
BTW, Mario Run only works if Magisk Hide is enabled for it, I guess that's normal (with Xposed active this time)
Thanks for all the clarifications, now I have a better understanding of it all

I guess this is the cause?
https://www.reddit.com/r/netflix/comments/69l2fp/all_netflix_no_longer_available_to_android/
Can anyone confirm?
Thanks!

eXtremeDevil said:
With Xposed disabled, and SafetyNet passing at 100%, Netflix says that my device is not compatible. Even installed from Google Play.
BTW, Mario Run only works if Magisk Hide is enabled for it, I guess that's normal (with Xposed active this time)
Thanks for all the clarifications, now I have a better understanding of it all
Click to expand...
Click to collapse
I don't know why Netflix not work for you. I have Netflix in my phone and using every day.
What's your phone Android build?
Netflix must work on your phone.
I have U11 and installed viperU magisk version custom rom. Android 7.1.1 and August patch.
Custom kernel and classic PurifyOS Xposed with so much modules like xprivacy, appsetting, hush sms, no device check , location report enabler, chromepie, native clipboard, and ...
Sent from my HTC U11 using Tapatalk

I have Resurrection Remix 6.0.1 from september 2016.
Is there a log or something where I can check what is cause Netflix refusal to work?
Do you have Magisk Hide enabled for those apps?
Thanks.
EDIT
Actually, Mario Run is now giving me the code error screen
CTS profile is passing.
EDIT 2
Additional info:
Super Mario Run works fine only for two levels, then is error 804-5100.
Netflix above version 4 (5 and later) says it is incompatible with my device.
- Both appear on Play Store.
- Store version is 8.1.73, installed this afternoon and cleared data.
- Bootloader is unlocked (maybe I should try to relock?).
- I can't find device verification in Play Store settings (is not there), even tried this:
https://forum.xda-developers.com/oneplus-2/help/module-fix-google-play-certification-t3602629
with no luck.
- Xposed installed with modules but disabled (from Xposed Manager).
- SafetyNet passing 100%.
- Tried both and without Magisk Hide enabled for the apps.
- Disabled superuser and enabled Magisk Core only.
- Build version: 6.0.1_r66 - MOB31E (my signature is outdated).
- I had Lucky Patcher but I uninstalled it.
- Also tried this:
https://forum.xda-developers.com/apps/magisk/xiaomi-safetynet-fix-t3600431
Nothing works.
Maybe some other app(s) is being detected by Netflix? Maybe a log would help? Or a full bug report?
Is it the ROM version? Maybe is device specific? Should I open a thread on the device's forum? Am I missing something?
Thanks in advance!
EDIT 3
Android Pay seems to work. I don't have NFC, I only got to the add card screen, but I guess that's enough.
EDIT 4
Kernel is Boeffla.

you need root switch

Question [SOLVED] Anyone with rooted 10s (with or without TWRP) and Google Pay working?

Hi
I succeded in rooting this phone without TWRP following this guide and applied the SafetyNet Fix without success.
I have also a rooted Poco X3 NFC with stock MIUI 12.5 where SafetynetFix is working fine. I have not flashed TWRP on the POCO, but I just use TWRP to boot into recovery, when needed.
Anyone succeded in having the RN 10s rooted with GPay working?
Thanks

no success for me too

Yup google pay is working for me. Make sure safetynet passes. I followed this: Root then install magisk as an app with different name, enabled magisk hide, enable safetynet fix, reboot and then install google pay

abhinavprateek said:
Yup google pay is working for me. Make sure safetynet passes. I followed this: Root then install magisk as an app with different name, enabled magisk hide, enable safetynet fix, reboot and then install google pay
Click to expand...
Click to collapse
Safetynet unfortunately does not pass.
Which version of SafetyNet Fix did you use?
I will check again.
Thanks

This one: https://github.com/kdrag0n/safetynet-fix
You need to install magisk and riru for it to work

abhinavprateek said:
Yup google pay is working for me. Make sure safetynet passes. I followed this: Root then install magisk as an app with different name, enabled magisk hide, enable safetynet fix, reboot and then install google pay
Click to expand...
Click to collapse
When you say "install magisk as an app with different name" you mean that I have to install Magisk normally, then from the Magisk settings, reinstall with different name to hide it from other app.
Is it correct?
Thanks

THANKS @abhinavprateek
Finally it's working!!!
Probably the issue was the correct version of SafetyNet Fix that has to be the Riru one, version 2.1.2 actually (and Riru has to be installed in Magisk previously, as you wrote).
After installing Safetynet fix I cleared all data in those apps:
Google Pay
Play Store
Play Services
and rebooted
Then the safetynet check in Magisk was working ad also Google Pay