Database Develop

Magisk Hide only works with core mode only.

Im using Pure Nexus with ElementalX kernel and magisk hide just works with core mode only. I have tried other kernel, deleted all frameworks and i have deleted all modules still same thing happening. Please help.

The Magisk log is helpful. Anyway try this from terminal
Code:
mv /dev/magisk /dev/magisk_system
rm -f /dev/magisk_system/mirror/vendor
ln -s /dev/magisk_system/mirror/system/vendor /dev/magisk_system/mirror/vendor

emrozkok said:
Im using Pure Nexus with ElementalX kernel and magisk hide just works with core mode only. I have tried other kernel, deleted all frameworks and i have deleted all modules still same thing happening. Please help.
Click to expand...
Click to collapse
Deic said:
The Magisk log is helpful. Anyway try this from terminal
Click to expand...
Click to collapse
I already posted a thread about this. It's pretty much the top thread here atm In Magisk forum. Keep it in core only mode until Magisk 13 when it is fixed. Google updated their SafetyNet, that's all! The magisk 13 beta does not pass, but the dev has fixed it. Just wait for full magisk 13 release!

Okay i will wait magisk 13 thank you for your help

emrozkok said:
Okay i will wait magisk 13 thank you for your help
Click to expand...
Click to collapse
Man, share your magisk log and I help you to pass SafetyNet

Deic said:
Man, share your magisk log and I help you to pass SafetyNet
Click to expand...
Click to collapse
Here it is

emrozkok said:
Here it is
Click to expand...
Click to collapse
ohh nice, magisk hide works, then enable all your modules and run the commands of my previous post. Tell me the result, included the log.

I just did a fresh install, and Installed the newest magisk 13 beta. everything works for me. i installed all modules, and safety net passes without being on core only mode.
---------- Post added at 07:46 AM ---------- Previous post was at 07:04 AM ----------
that's weird I rebooted now safety net doesn't work

emrozkok said:
Okay i will wait magisk 13 thank you for your help
Click to expand...
Click to collapse
kend0g said:
I just did a fresh install, and Installed the newest magisk 13 beta. everything works for me. i installed all modules, and safety net passes without being on core only mode.
---------- Post added at 07:46 AM ---------- Previous post was at 07:04 AM ----------
that's weird I rebooted now safety net doesn't work
Click to expand...
Click to collapse
Until the full magisk 13 release, a.k.a not in beta, the only way to pass currently is core only mode. Check the thread I posted as I was the first one to report it here in Magisk forum. Even with 0 modules installed, you won't pass safetynet without core only mode atm. So easiest fix for now until full 13 release is to install magisk 12 and enable core only mode. You can flash any system mods that don't use magisk and you should be ok.

manor7777 said:
Until the full magisk 13 release, a.k.a not in beta, the only way to pass currently is core only mode. Check the thread I posted as I was the first one to report it here in Magisk forum. Even with 0 modules installed, you won't pass safetynet without core only mode atm. So easiest fix for now until full 13 release is to install magisk 12 and enable core only mode. You can flash any system mods that don't use magisk and you should be ok.
Click to expand...
Click to collapse
thanks for the info.. but I can just wait till the official 13 build. the only reason I used magisk hide was for pogo but I don't play that anymore, few times to use android pay. but I just play Walking War Robots now(if they start using safety net ill stop playing android games all together). anyway thank you.

the new 6-16 beta, safety net passes, core only not needed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hello friends,
I have ZenFone 2 running on LineageOS 14.1 and rooted with magisk. I can pass the safetynet only if the core mode is ON and magisk hide is ON. Thats all fine but my problem is after sometimes all of a sudden i cant pass the safetynet even though the Core mode and Magisk hide is enabled. I am unable to figure it out that exactly when does it happens. Sometimes i restart my device i am unable to pass but other times i restart the device it does pass. Its unpredictable. But i want to know the root cause of the problem. Why all of a sudden i am not able to pass the safety net even though Core mode, Magisk hide is enabled? Also my USB debugging is off.
EDIT- So i flashed a magisk module name "universal safety net fix" and after that even after turning OFF the core mode i am able to pass the Safety Net Hurrah!!!! All credit to the modder who made that module.

Unable to pass SafteyNet

I first want to start off by apologizing if this is posted in the wrong section/area.
My goal is to basically allow playing Pokemon Go, and using Android Pay on my LG G3 with root abilities.
I've gone ahead and installed Magisk, which was a bit of a process. My LG G3 is a Sprint LS990.
The process went like this:
Factory clean Flash using LG tool -> Rooted phone using Stump Root -> Installed latest TWRP (3.2.1-0) using Flashify -> then proceeded with root stock rom flash ( I did not flash modem in link )-> Installed Magisk using TWRP recovery.
It was a bit of a hassle, but it was installed. But now as title states, I'm unable to pass SafteyNet even with troubleshooting that is found around searching Google.
Info:
Android: 5.0.1
Kernel version: 3.4.0
Magisk v15.3
Any ideas on what I could be doing wrong?

CP87 said:
Kernel version: 3.4.0
Click to expand...
Click to collapse
Take a look at the requirements for MagiskHide to function: https://forum.xda-developers.com/showpost.php?p=73145989&postcount=5

This is a huge bummer. Didn't even realize that. Looks like I'll need to go looking for a replacement phone after all.

CP87 said:
I first want to start off by apologizing if this is posted in the wrong section/area.
My goal is to basically allow playing Pokemon Go, and using Android Pay on my LG G3 with root abilities.
I've gone ahead and installed Magisk, which was a bit of a process. My LG G3 is a Sprint LS990.
The process went like this:
Factory clean Flash using LG tool -> Rooted phone using Stump Root -> Installed latest TWRP (3.2.1-0) using Flashify -> then proceeded with root stock rom flash ( I did not flash modem in link )-> Installed Magisk using TWRP recovery.
It was a bit of a hassle, but it was installed. But now as title states, I'm unable to pass SafteyNet even with troubleshooting that is found around searching Google.
Info:
Android: 5.0.1
Kernel version: 3.4.0
Magisk v15.3
Any ideas on what I could be doing wrong?
Click to expand...
Click to collapse
Do you checked your Google play. Do you have certificate and why you don't added screen when you can pass safety net

chudy_85 said:
Do you checked your Google play. Do you have certificate and why you don't added screen when you can pass safety net
Click to expand...
Click to collapse
Google Play is checked off. I'm not too sure what you mean by certificate. But I figured a screen shot wasn't worth it as my kernel version isn't supported.
Requirements:
A Linux kernel version of at least 3.8
Click to expand...
Click to collapse
Since mine is only 3.4.0, there is pretty much nothing I can do with this phone in terms of having it rooted with those apps.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

CP87 said:
Google Play is checked off. I'm not too sure what you mean by certificate. But I figured a screen shot wasn't worth it as my kernel version isn't supported.
Since mine is only 3.4.0, there is pretty much nothing I can do with this phone in terms of having it rooted with those apps.
Click to expand...
Click to collapse
Why not flash a rom? Lineage will pass. Phone is not useless, just stock is.
https://download.lineageos.org/ls990

madbat99 said:
Why not flash a rom? Lineage will pass. Phone is not useless, just stock is.
https://download.lineageos.org/ls990
Click to expand...
Click to collapse
I'm still somewhat new to the whole "flashing" / "rooting" devices. It's been a fun learning curve so far.
So flash Lineage using TWRP? Is there a guide I should be looking out for? Would be awesome if I could use my apps with this.

Maybe install safetynet fix module?

madbat99 said:
Why not flash a rom? Lineage will pass. Phone is not useless, just stock is.
https://download.lineageos.org/ls990
Click to expand...
Click to collapse
If they've updated the kernel, yes it might pass. But it's far from certain that they have...
BajinganTengik said:
Maybe install safetynet fix module?
Click to expand...
Click to collapse
It won't make any difference if the kernel doesn't support mount namespace.

CP87 said:
I'm still somewhat new to the whole "flashing" / "rooting" devices. It's been a fun learning curve so far.
So flash Lineage using TWRP? Is there a guide I should be looking out for? Would be awesome if I could use my apps with this.
Click to expand...
Click to collapse
Yep, wipe system,data, cache, dalvik/art. Flash rom, gapps and magisk. Backup everything you want to keep. Better check in your device's forum for specific instructions. It passes on my Sprint see who's last official update was KitKat, but has official lineage 14.1

madbat99 said:
Yep, wipe system,data, cache, dalvik/art. Flash rom, gapps and magisk. Backup everything you want to keep. Better check in your device's forum for specific instructions. It passes on my Sprint see who's last official update was KitKat, but has official lineage 14.1
Click to expand...
Click to collapse
Do you have the LG G3 from Sprint as well?
I'll remove magisk and try flashing the LineageOS. Anything special I should know afterwards? My current version on LG G3 is 5.0.1 // Lollipop. So should I factory reset and go back to KitKat?

CP87 said:
Do you have the LG G3 from Sprint as well?
I'll remove magisk and try flashing the LineageOS. Anything special I should know afterwards? My current version on LG G3 is 5.0.1 // Lollipop. So should I factory reset and go back to KitKat?
Click to expand...
Click to collapse
No you don't need to go to KitKat. Lineage is nougat. The usual procedure is, Download the rom zip for your device, download gapps for 7.1 and magisk. Then boot to recovery, full wipe and factory reset, then flash rom, gapps and magisk.
Check here
And this post says magisk works fine and passes safetynet.
Have fun

I will give this a try and report back on results.
Thanks so much for the help so far!

Just giving a quick update that SafteyNet is now passing, and Android Pay along with other apps are working like a charm w/root.
Thanks again!

unable to boot after flashing xposed

hi
i have a samsung note3 N9005, stock firmware 5.0
i flashed xposed framework sdk21 , i made a wipe dalvik
but phone refuses to start, it hangs at samsung logo
what was wrong ?? how to fix it ? or there is a way to uninstall xposed ??
thanks

is there a specific xposed framework sdk21 for samsung ??? the one i used, i download it from magisk modules list

Uninstaller here (I don't know if it'll work with the systemless one, worth a try):
https://dl-xda.xposed.info/framework/uninstaller/
Try this Xposed instead:
https://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-5-0-x-t3455992

thanks a lot my friend !!!! it worked !!!

the question now is which version of xposed to flash ??? Samsung note3 N9005 Android 5.0

falciatrice10 said:
the question now is which version of xposed to flash ??? Samsung note3 N9005 Android 5.0
Click to expand...
Click to collapse
Read the thread I sent (I edited the previous post with it). It explain everything there and there's only one zip there also (attached to the thread). Also, don't forget to clean the caches after you flash it, it's important.

that one is for xposed installer not for Magiks !!! i dont want to bootloop my phone again

falciatrice10 said:
that one is for xposed installer not for Magiks !!! i dont want to bootloop my phone again
Click to expand...
Click to collapse
Dude... The zip is attached there, and as you said the magisk one DON'Twork for you... So, there's nothing to do, try the one I sent, the zip is attached there so is the uninstaller, which means that if something goes wrong like a loop, just flash it and gone. Let's finish this useless conversation, solution is already there lol.
The only difference btw the magisk one and the normal one is that the magisk one is systemless.

we are here to help each other, tahts purpose of forums.
I was using xposed with normal root (superSu) and now I want to install magisk and systemless xposed, because my bank app refuse to starts (it detects root).
I tried these files
xposed-v87.1-samsung-5.0.x-sdk21-by-dkcldark-arm.zip
Xposed_Framework_(SDK_21)-89.3_(Systemless).zip
Xposed_Framework-v89-v90b3r8.zip
and all of them give bootloop

falciatrice10 said:
We are here to help each other, thats purpose of forums.
I was using xposed with normal root (superSu) and now I want to install magisk and systemless xposed, because my bank app refuse to starts (it detects root).
I tried these files
and all of them give bootloop
Click to expand...
Click to collapse
I know, my bad if it sounded rude.
Anyways, did you even read the Xposed Systemless thread? It says there clearly that you won't be able to pass the SafetyNet either with the original or with the systemless one, which means that no matter which one you choose, your bank app will still detect it, since it break the SafetyNet. That's it.
After all, you gotta choose between using Xposed but not pass the SafetyNet, or not use Xposed and pass it.
I have two recommendations for you now:
- 1st is to not use Xposed.
- 2nd (if Xposed is really that important and you'll die if you can't have it) is to update your device, Lollipop is so old, neither that system itself or Xposed for it have support, for a long time ago...
Use a custom rom to update your device to the latest Android if possible or if Samsung didn't release any further update for you (you can search for one for your device model here). Although, even if you update, Xposed will still break the SafetyNet, but it'll at least work and not loop...
Also read this in RED (from official Xposed thread):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

it will not work even with magisk hide ???
could you please test it in your phone https://play.google.com/store/apps/details?id=com.uib.uibmobile ???

falciatrice10 said:
it will not work even with magisk hide ???
could you please test it in your phone https://play.google.com/store/apps/details?id=com.uib.uibmobile ???
Click to expand...
Click to collapse
It won't fellow, I assure you, if you don't believe me, just see check the threads I mentioned, they say the same. This app you sent is not available in my country though.

If you really want xposed you can just Uninstaller xposed installer app and disable xposed in Magisk to use your banking app (and pass SafetyNet) then just re-enable when done
*Why not just use the banks website instead of the app, then you wouldn't have to worry about it at all.
falciatrice10 said:
it will not work even with magisk hide ???
could you please test it in your phone https://play.google.com/store/apps/details?id=com.uib.uibmobile ???
Click to expand...
Click to collapse
Sent from my SM-N920G using Tapatalk

BurnedDrake said:
If you really want xposed you can just Uninstaller xposed installer app and disable xposed in Magisk to use your banking app (and pass SafetyNet) then just re-enable when done
*Why not just use the banks website instead of the app, then you wouldn't have to worry about it at all.
Click to expand...
Click to collapse
Read from the beginning, he's unable to use Magisk one since it gives him a loop, also the original one, and he's using lollipop.

I did, but I'm understanding it as the Magisk one worked fine, he just couldn't use his banking app, so he tried to flash regular xposed (but the wrong version for his phone) and it bootlooped. So I was giving him suggestions on how to work around his problem.
Are we sure it bootlooped? Some phones take upwards of 20-30 minutes for that first boot after installing xposed
abacate123 said:
Read from the beginning, he's unable to use Magisk one since it gives him a loop, also the original one, and he's using lollipop.
Click to expand...
Click to collapse
Sent from my SM-N920G using Tapatalk

i was using regular xposed, but now i want to use the systemless one in order to use the bank app.

falciatrice10 said:
i was using regular xposed, but now i want to use the systemless one in order to use the bank app.
Click to expand...
Click to collapse
And I already told you that you won't. Better do some research about SafetyNet and how Xposed affect it. Unless you do what I've recommended to you, and the tips given above by BurnedDrake will also help you.
See:

Magisk v17.1 and Xpose Module --> kills Magisk Hide/SafetyNet fails

I have a unlocked, rooted Xiaomi Redmi Note 4 running 7.2.1 (Viper mido version)
Got the Magisk v17.1 update this morning. I needed to remove Magisk 16.x via the uninstaller, and install the new update from TWRP Recovery. (a pain, but it seems to work. regular upgrading has a few issues)
Then I installed my preferred Magisk modules. All seem to work as they should except the Xpose Framework v89-v90b3r11 module. When installed it kills Magisk Hide and SafetyNet fails, when I uninstall it, SafetyNet succeeds again (Magisk Hide is usable).
For for now, until the Xpose Framework module is fixed, if you want to use Magisk Hide, probably can't install the Xpose module.
Cheers,
AB

You won't be able to pass SafetyNet if you have Xposed installed on your device. This has been the same since the start and not a Magisk v17.1 thing.
Sent from my #FlagshipKiller3T using Tapatalk

Read the threads
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

DarkSJ1998 said:
You won't be able to pass SafetyNet if you have Xposed installed on your device. This has been the same since the start and not a Magisk v17.1 thing.
Sent from my #FlagshipKiller3T using Tapatalk
Click to expand...
Click to collapse
Funny that, I had it working before. Possibly blind luck. I had Magisk installed and the Xpose Framework, and SafetyNet/Magic Hide was usable.
I just was using only one of Xpose's Module. So I don't need Xpose at all.

airbrushwerx said:
Funny that, I had it working before. Possibly blind luck. I had Magisk installed and the Xpose Framework, and SafetyNet/Magic Hide was usable.
I just was using Xpose's LuckyPatcher Module.
Click to expand...
Click to collapse
Maybe when you were using it, that particular app wasn't able to detect Xposed framework & only checked for root, which was tricked by Magisk Hide. And now the developer might have improved the checks or what not.
Sent from my #FlagshipKiller3T using Tapatalk

Bro, I need to hide magisk from a banking app, Now what can i do?
v 17.1
thanks everyone, It's working :victory:

BengaliBhai said:
Bro, I need to hide magisk from a banking app, Now what can i do?
v 17.1 here is nothing. how can i hide
Click to expand...
Click to collapse
buy other phone for banking

BengaliBhai said:
Bro, I need to hide magisk from a banking app, Now what can i do?
v 17.1 here is nothing. how can i hide
Click to expand...
Click to collapse
Does your banking work without Xposed Installer app installed? My internet banking app detects root if Xposed Installer manager is installed. So what I do is installing or updating the Xposed modules, rebooting, and then uninstalling Xposed manager, and all modules will still work, as they only require that Xposed systemless files (v89.3) are installed.

DarkSJ1998 said:
Maybe when you were using it, that particular app wasn't able to detect Xposed framework & only checked for root, which was tricked by Magisk Hide. And now the developer might have improved the checks or what not.
Sent from my #FlagshipKiller3T using Tapatalk
Click to expand...
Click to collapse
Yes, it looks like it might have been the way I installed the apk after Magisk, but before Xpose-framework. I inadvertently used some 'loophole' that allowed it not detect root, but still have Xpose installed.
Cheers,
AB

BengaliBhai said:
Bro, I need to hide magisk from a banking app, Now what can i do?
v 17.1 here is nothing. how can i hide
Click to expand...
Click to collapse
BengaliBhai,
You probably need to reinstall Magisk.
1) Download the Magisk-uninstaller.
2) Boot to TWRPS (reovery)
3) run the uninstaller. (which should bring back your original boot partition)
4) then install Majisk v17.1
5) reboot into system.
Now Majisk Manager should be fully functional.
I ran into this, v17.0 installed, but MM 5.9..0 wasn't working correctly, not showing modules, not allowing access, etc... Then I got the v17.1/5.9.1 update and still did the same. No boot-looping, but 'root limbo'. The above process resolved it all.
Cheers,
AB

Try xposed module rootcloak works great with my bank app oreo

david6910 said:
Try xposed module rootcloak works great with my bank app oreo
Click to expand...
Click to collapse
Lucky patcher isn't banned from xda? ?

If Your Device Didn't Pass The SafetyNet, Try DeviceSpoofingTool4Magisk From This Thread https://forum.xda-developers.com/apps/magisk/qa-want-to-install-modules-magisk-v13-3-t3800435.

youtuber123 said:
Lucky patcher isn't banned from xda? ?
Click to expand...
Click to collapse
Im not talking about lucky patcher... I talking about a xposed module lol

airbrushwerx said:
Yes, it looks like it might have been the way I installed the apk after Magisk, but before Xpose-framework. I inadvertently used some 'loophole' that allowed it not detect root, but still have Xpose installed. I also use LuckyPatcher to mod/patch apks. I'll concede that it might have been a combination of them that allowed that it to work until i needed to reinstall Magisk. No foul, no harm.
Cheers,
AB
Click to expand...
Click to collapse
Do not discuss warez here. That is designed to steal from developers. This is a site for developers. You will be banned for discussing it here.

Tr4sHCr4fT said:
buy other phone for banking
Click to expand...
Click to collapse
Bro use RootCloak Xposed Module to hide Banking app from root and make it usable....

OxygenOS 10.0.10 [EU] and 10.3.7 [India & Global] for the OnePlus 7 Pro

OnePlus Forum Post
*Both official and mirror links now available*
Changelog
System
Optimized the user experience of the status bar in the call scene to reduce mis-touches
Updated GMS package to 2020.08
Updated Android Security Patch to 2020.11
Fixed small probability flashback issue with Phone app
EU
10.0.10 EU now on Oxygen Updater
Official : https://oxygenos.oneplus.net/OnePlus7ProOxygen_21.E.31_OTA_031_all_2011052309_ce04356d7bed40f8.zip
Mirror : https://www.androidfilehost.com/?fid=10763459528675590798
My Android 10 Collection : https://www.androidfilehost.com/?w=files&flid=296897
GLOBAL
10.3.7 GLOBAL now on Oxygen Updater
Official : https://oxygenos.oneplus.net/OnePlus7ProOxygen_21.P.31_OTA_031_all_2011052258_42a665d7dc95490e.zip
Mirror : https://www.androidfilehost.com/?fid=10763459528675591505
My Android 10 Collection : https://www.androidfilehost.com/?w=files&flid=296897
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

10.3.7 global is now available on oxygen updater as of today

dipleg said:
10.3.7 global is now available on oxygen updater as of today
Click to expand...
Click to collapse
Yep, woke up to a notification this am.
Anyone tried it yet? I borked my phone the first time I tried to do an OTA, had to completely reset and start from scratch, and I know it was a thing I did so I'm a little leery of doing any OTAs even though I've done one since without any problems.

Installed 10.3.7 today. Everything is working fine except magisk fails safetynet check. Tried magisk uninstaller + new install but no luck.

fonebone2 said:
Installed 10.3.7 today. Everything is working fine except magisk fails safetynet check. Tried magisk uninstaller + new install but no luck.
Click to expand...
Click to collapse
Passes just fine for me. Do you have magisk hide enabled? It's disabled by default now. If you do and it still fails, you might have a mod that's making it fail.

H4X0R46 said:
Passes just fine for me. Do you have magisk hide enabled? It's disabled by default now. If you do and it still fails, you might have a mod that's making it fail.
Click to expand...
Click to collapse
Yep, that did it. Thanks!
Sent from my GM1917 using Tapatalk

Updated OP with Global build : https://androidfilehost.com/?fid=10763459528675591505

fonebone2 said:
Yep, that did it. Thanks!
Sent from my GM1917 using Tapatalk
Click to expand...
Click to collapse
Gladly! [emoji4] Yeah it's a weird decision for Magisk dev to make, but it's good to know!

Psychlone said:
Yep, woke up to a notification this am.
Anyone tried it yet? I borked my phone the first time I tried to do an OTA, had to completely reset and start from scratch, and I know it was a thing I did so I'm a little leery of doing any OTAs even though I've done one since without any problems.
Click to expand...
Click to collapse
Yeah man I'm on 10.3.7 now with latest magisk and edxposed, working flawlessly and passing basic eval safetynet

OP updated with official links.

dipleg said:
Yeah man I'm on 10.3.7 now with latest magisk and edxposed, working flawlessly and passing basic eval safetynet
Click to expand...
Click to collapse
Thanks, I took the leap (it's not really, just my own head holding me back) and everything works just fine.
Crazy how one bad experience can cause trepidation.

can anyone share boot.img of 10.3.7 ?
planning to change kernel.

fairyshacker said:
can anyone share boot.img of 10.3.7 ?
planning to change kernel.
Click to expand...
Click to collapse
Sendspace.com Mobile File
www.sendspace.com

Okay, I want to just go into TWRP, wipe data and system, flash a zip, flash twrp, reboot to twrp, flash the rom again, twrp, then magisk.
I'm coming from crDroid 7.x (Android 11),: on a GM1915. What are the chances that this will actually work?
I have the ability to plug into a computer with the phone in edl mode and use msm tool, but I would rather not go home, fire up my computer, flash, and come back out. Though obviously if this fails, that's exactly what I'll be doing to unbrick my phone lol

agentfusion said:
Okay, I want to just go into TWRP, wipe data and system, flash a zip, flash twrp, reboot to twrp, flash the rom again, twrp, then magisk.
I'm coming from crDroid 7.x (Android 11),: on a GM1915. What are the chances that this will actually work?
I have the ability to plug into a computer with the phone in edl mode and use msm tool, but I would rather not go home, fire up my computer, flash, and come back out. Though obviously if this fails, that's exactly what I'll be doing to unbrick my phone lol
Click to expand...
Click to collapse
Did it work fine?

Hi guys, i have the 1917 global with 10.3.7 can i flash the EU 10.0.2??? Thanks