My tab is just hanging at samsung logo i cant even get into recovery i need help badly guys please i need to gk back to stock but dont have file for odin
Sent from my ADR6400L using XDA Premium App
i don't think there is a tar file for the vzw tabs. odin is generally better with the GSM devices. download heimdall, and then download the ec02 files. plug your phone in, and boot into download mode (power + vol down) put factory in system, param in param, cache in cache, and the zimage in both kernel and recovery. hit start. this will take you back to stock.
1. download heimdall. get it here: http://forum.xda-developers.com/showthread.php?t=755265
2. download the stock verizon files. get them here: http://www.blackmugmedia.com/Android/GT/Mirror/Recovery/CDMA/Verizon/VZW Stock/
you need all four files.
3. download the drivers for the samsung sch-i800. find those here: http://downloadcenter.samsung.com/c...G_USB_Driver_for_Mobile_Phones_v1.3.350.0.exe
4. unzip heimdall. go into the drivers folder, and run zadig.exe. at the top, select 'list all devices'. go to the dropdown menu, and select Samsung Composite USB (i'm pretty sure that's what it was called.) click start, and let it run.
5. open the heimdall front end.
6. put system in system (if you're flashing to ec02, then put factory in system)
put cache into cache
put param into param
put the zimage into both the kernel and recovery slots.
7. turn your tab off, and plug it into the computer using USB. hold down the power and the volume down buttons until you see the little droid dude with a shovel.
8. click the start button on heimdall.
9. wait for the flash to complete (don't unplug your device, obviously, during the flashing.) once your phone reboots, it's okay to unplug it.
10. now, boot into the stock recovery, and wipe data and cache.
11. enable usb debugging.
12. plug your phone back in to the computer.
13. now run superoneclick for root.
14. either play with it in stock, or go find oldmacnut's excellent Better Than Life Rom, and follow the instructions to flash that.
15. enjoy your tab!
my kernel is 2.3.35.7-i897UCKH3-CL461307
The wiki states I must be at Android 2.3 build UCKK4 (AT&T) to get to cm10.
I tried the captivate OTA update- says I am at most recent firmware.
I tried kies- and it says unregistered device.
I just bought this phone (new-unlocked) from amazon to replace my failed captivate (running cm10). I really miss CM on the phone. lol.
Can someone point me in the correct direction? I am hoping there is a way to get to cm10 from where I am.
Any help is appreciated.
Thanks in advance
John Kilbert.
ota not a good plan.
read this thread for your path to kk4
http://forum.xda-developers.com/showthread.php?t=1350266
Thnanks. I have read that.
I am here:
Download Easy CWM and Bootloaders Gingerbread here
Dead link. [http://teamkomin.com/Captivate/i897-Speedmod-K13E-GBbootloaders-One-Click.jar]
Actually, they whole site is empty.
Any ideas?
Here ya go....Stock KK4 http://forum.xda-developers.com/showthread.php?p=18370912
Then flash through Odin the .tar file version of KK4 Corn Kernel version 7.0A to get CWM recovery....here...http://forum.xda-developers.com/showthread.php?p=18233847
Then flash through cwm ur Rom of choice.
Sent from my SAMSUNG-SGH-I747 using xda premium
Quick few questions please? (elaboration)
from the read-me / many posts:
**Once u have the i897 Gingerbread Bootloaders, it is not necessary to flash them again. They are
backwards compatible, therefore you can flash Eclair, Froyo, Gingerbread, CyanogenMod, MIUI without issues,
per the proper install instructions.
-Are the bootloarders mentiond, the ones from flashing, or from samsung/att itself. eg. I have stock gingerbread 2.3.4 from the factory, should I use the bootloaders or not?
-Would it hurt to reinstall the bootloaders if there was any question?
- I performed a dry run, and cannot get the "digging down android" I get this:
Android system recovery <3e>
Samsung recovery utils -for bml-
image:
http://imgur.com/bJcQDXU
What I expected:
http://apcmag.com/images/galaxy-froyo-3.jpg
Did I do something wrong? (edit: built a jig- goes into digger mode now)
-since I am on 2.3.4 I am tryin gto install the kk4 you linked-
the instructions say get to download mode (done)
run oding as admin (done)
yellow com lights up(done)
press start? --how does this get to the correct file? do I load it under PIT, PDA, PHONE, CSC?
thanks much.
JOhn kilbert.
Edit:
Here is the "plan"
Prerequisites:
Download Odin3 v1.7.zip & install
Download CornKernel_UCKK4_v70a
Download Rom
Instructions:
1. Get rom onto your internal SD card (copy to phone using PC.)
2. Download and Run Odin Flashing Utility (not Odin one click) Odin3 v1.7.zip (install on win pc)
3. Boot phone into DOWNLOAD mode (by
plug USB cable into computer
have phone shut off
hold both volume buttons
plug USB into phone
let go of buttons when you see an android digging "down"
4. Flash to Stock I897UCKK4 Gingerbread Firmware
*tbd
4. Click RESET button in Odin (beside START)
5. Click PDA button in Odin and find your kernel.tar file
(kk4 corn kernel 7.0A)
6. Click "Start" in Odin
7. Reboot into RECOVERY mode (instructions below) ** Use volume buttons to navigate up/dn and pwr for enter.
have phone shut off
Hold both volume buttons
press and hold power button
KEEP ALL 3 BUTTONS HELD for 3-5 seconds
after kernel bootscreen you will see clockwork recovery menu
8. Select "flash zip from sd card"
9. Navigate to the rom you placed on internal sd in step 1 : select Yes
10. Phone reboots to new ROM.
Here i what I did-
unpacked .zip from http://forum.xda-developers.com/showthread.php?p=18370912
http://hotfile.com/dl/137865417/4bc...S_Bootloaders_Re-partition_Full_Wipe.zip.html
ran as admin the odin file.
pressed the big start button
here is the output.
<ID:0/005> Firmware update start..
<ID:0/005> Sbl.bin
<ID:0/005> zImage
<ID:0/005> boot.bin
<ID:0/005> factoryfs.rfs
<ID:0/005>
<OSM> All threads completed. (succeed 0 / failed 1)
phone is stuck
any advice?
Have u looked at this Captivate - PC Connection Issues... thread. http://forum.xda-developers.com/showthread.php?p=33227541
Be careful flashin packages with bootloaders. If flash fails during the install of the boot.bin or sbl.bin u could possibly brick ur phone.
If u were on anything gingerbread before this, then u have the gb bootloaders. So u can use a package without the Bls included.
Try a different micro usb/usb cable or diffferent usb port. More info in that thread i linked.
Majority of the time, the trying of a different cord is the solution.
Sent from my SAMSUNG-SGH-I747 using xda premium
Yea, I bricked it. Back running though. Was a hairy couple of hours. lol.
Thanks for your help.
John Kilbert
Here is how I did it (100% working)-
From android 2.3.4.
Directions that worked: I used linux host running a xp virtual machine guest. This may have presented sopme issues, but it worked.
I used the odin method. Each time I connnected the phone I needed to goto devices and click the phone. I need to do this
because I needed 2.3.5 to get a rom installed, and OTA/Kies failed everytime.
Preliminary: Download Rom (and gapps) and get on internal 13gb SD card. power off phone.
Flash to Stock I897UCKK4 Gingerbread Firmware
A. Download:
reference (http://forum.xda-developers.com/showthread.php?p=18370912)
odin or heimdall one click (post #3) I used the odin.
http://hotfile.com/dl/137865417/4bc...S_Bootloaders_Re-partition_Full_Wipe.zip.html
Download file
B. extract
a. run as administrator odin file contained in the archive itself.
b. get to download mode (i used the jig method- button method may be used also)
C. click start.
a. (took me 5 tries to get a successfull install ..whew.. each failure I removed battery
and held the up/down vol buttons and tried again whhile the usb was connected. I believe it may have been a
corrupt download, as when I redownloaded it it worked on the 5th try)
Install CornKernel & Rom
Prerequisites:
Download Odin3 v1.7.zip & install
Download CornKernel_UCKK4_v70a
Download Rom (and Gapps) and get on internal 13gb SD card (if you didn't do it earlier)
Instructions:
1. Get ROM onto your internal SD card (copy to phone using PC.)
a. (my choice- or use yours: wiki.cyanogenmod.org/w/Captivatemtd_Infohttp://wiki.cyanogenmod.org/w/Captivatemtd_Info)
(http://download.cyanogenmod.org/get/jenkins/12598/cm-10.0.0-captivatemtd.zip)
b. Gapps (see 11)
2. Download odin Flashing Utility (not Odin one click) Odin3 v1.7.zip (install on win pc) & cornkernel.
a. (ref http://forum.xda-developers.com/showthread.php?p=18233847 for cornkernel)
http://dl.dropbox.com/u/10453685/android/CornKernel_UCKK4_v70A.tar
b. (ref forum.xda-developers.com/showthread.php?t=1350266 for odin )
http://forum.xda-developers.com/attachment.php?attachmentid=582251&d=1304114050
3. deleted.
4. Run Odin (as administrator)
5. Boot phone into DOWNLOAD mode (by jig or)
a. plug USB cable into computer
b. have phone shut off
c. hold both volume buttons
d. plug USB into phone
e. let go of buttons when you see an android digging "down"
(if you get a different screen- try making the jig-its easier especially if you have large clumsy hands like me) or-
(http://forum.xda-developers.com/showthread.php?p=33227541)
6. ODIN should see yellow slot fill as you connected phone.
a. Click RESET button in Odin (beside START)
b. Click PDA button in Odin and find your kernel.tar file
(kk4 corn kernel 7.0A)
c. Click "Start" in Odin
d. wait fro pass.
e. phone will reboot with a corn kernel.
7. Reboot phone into RECOVERY mode (instructions below) ** Use volume buttons to navigate up/dn and pwr for enter.
(ref: http://forum.xda-developers.com/showthread.php?p=33227541 for problems)
a. have phone shut off
b. Hold both volume buttons
c. press and hold power button
d. KEEP ALL 3 BUTTONS HELD for 3-5 seconds.
e. after kernel bootscreen you will see systemcorps cwm recovery menu. if not try again
f. Select "install zip from sd card" option from menu.
g. - choose zip (option in menu)
h. Navigate to the rom you placed on internal sd in step 1 : select Yes
8. Let reboot and install
a. phone will reboot on its own a few times
b. when finished it willleave you at cwm recovery menu.
c. choose reboot system now.
9. Shutdown, reinstall SD & SIM
10. Use as normal. done
11. Realize you need gapps!
a. should have put in in the folder back on step 1. If you did this you could have installed it at step 8 just after (b.)
12. download correct gapps and place in root (same place as rom.zip)
(http://wiki.cyanogenmod.org/w/Gapps)
13. Reboot phone into RECOVERY mode ** Use volume buttons to navigate up/dn and pwr for enter.
(ref: http://forum.xda-developers.com/showthread.php?p=33227541 for problems)
a. have phone shut off
b. Hold both volume buttons
c. press and hold power button
d. KEEP ALL 3 BUTTONS HELD for 3-5 seconds.
e. after att/ cyanogen kernel bootscreen you will see cockwork mod (not syscorp) cwm recovery menu. if not try again
f. Select "install zip from sd card" option from menu.
g. - choose zip (option in menu)
h. Navigate to the gapps.zip you placed on internal sd.
i. choose yes
j. wait for complete (watch bottom of screen)
k. choose go back
l. reboot system now
m. will take longer and say upgrading.
14. done (update google info under settings-accounts)
Good deal. Glad u got it goin !
Sent from my SAMSUNG-SGH-I747 using xda premium
How to install Android 9 Pie update on Galaxy S9 [One UI update]
Compatibility: This section is compatible only with model SM-G960F of the Galaxy S9,
Step by step guide:
Step 1. Download the Android Pie firmware from the downloads section above – software version CRLI/CSAB. Make sure you have downloaded the correct firmware file on your PC. Remember, this is only for the Galaxy S9 model no. SM-G960F and Galaxy S9 model no. SM-G965F.
Step 2. Install Samsung USB driver (method 1 on the linked page) first of all. Double-click the .exe file of drivers to begin the installation. (Not required if you have already done this.)
Step 3. Also, download Odin PC software (latest version).
Step 4. Extract the firmware file now. You can use free software like 7-zip for this. Install 7-zip, then right click on firmware file and under 7-zip, select ‘Extract here’. You should get files in .tar.md5 format now. (You may a bunch of files, and you will find text like AP, BL, CP or CSC etc. written at the beginning of those files.) We will be loading this file into Odin, to be installed on the device.
Step 5. Extract the Odin file. You should get the Odin exe file (other files could be hidden, hence not visible).
Step 6. Disconnect your Galaxy S9 from PC if it is connected.
Step 7. Boot your Galaxy S9 into download mode:
Power off your device. Wait for 6-7 seconds after screen goes off.
Press and hold the three buttons Volume down + Bixby + Power together until you see the Warning screen.
Press Volume Up to continue to download mode.
Step 8. Double click on Odin .exe file (from step 5) to open the Odin window as shown below. Be careful with Odin, and do just as said to prevent problems.
Step 9. Connect your device now using the USB cable. Odin should recognize your device. It’s a must. When it recognizes, you will see Added!! message appearing in the Log box in the bottom left, and the first box under ID:COM will also show a no. and turn its background blue.
You cannot proceed until you get the Added!! message, which confirms that Odin has recognized your device.
If you don’t get Added!! message, you need to install/re-install drivers again, and use the original cable that came with the device. Mostly, drivers are the problem (look at step 2 above).
You can try different USB ports on your PC too.
Step 10. Load the firmware files into Odin. Click the AP button on Odin and the select the .tar.md5 file from above. See the screenshot below to find how the Odin window will look like after you have loaded the files.
Click on BL tab, and select the file beginning with BL text.
Click on AP tab, and select the file beginning with AP text.
Click on CP tab, and select the file beginning with CP text.
[Different!] Click on CSC tab, and select the file beginning with HOME_CSC text. If HOME_CSC file isn’t available, then select the file beginning with CSC text.
About CSC file: Using the HOME_CSC file won’t reset your device, and data on the phone shouldn’t be deleted. However, when we select regular CSC file, and it results in CSC on the device being different than that in CSC file, your phone will be formatted automatically. You can even choose to ignore loading the CSC file, that may do alright too. But if it doesn’t work out, repeat the whole process and select CSC file this time around.
Info: When you load files, Odin checks the md5 sum of firmware file, which takes time. So, simply wait until that’s done and the firmware file is loaded. Don’t worry if Odin gets unresponsive for a while, it’s normal. Binary size will also show up in Odin.
Step 11. Click on Options tab, and make sure Re-partition checkbox is NOT selected. Don’t use PIT tab, ever.
Go back to the Log tab now, as it will show the progress of the firmware installation when you hit the start button in the next step.
Step 12. Verify that everything is okay as mentioned above. When satisfied, click the Start button on Odin now to start flashing the firmware on your device.
Wait till installation is finished, after which your device will reboot automatically. You’ll get PASS message as shown below upon successful installation from Odin.
Some errors you may run into, and with respective solution.
If Odin gets stuck at setup connection, then you need to do this all again. Disconnect your device, close Odin, boot device into download mode again, open Odin, and then select the file and flash it again as said above.
If you get FAIL in the top left box, then also you need to flash the file again as stated just above.
Done!
Download Link:
Click Here To Download
Thanks bro
Bro,
The download link does not exist.
Visit this link for Rooting A50s with Magisk v19.3 ( Magisk Manager Custom Channel Update ):
https://forum.xda-developers.com/galaxy-a50s/how-to/guide-root-galaxy-a50s-magisk-v19-3-t4001271
Complete Guide for Rooting Samsung Galaxy A50s using Magisk only ( tested on SM-A507FN ), You need Latest Magisk Manager ( MagiskManager-v7.3.4.apk ) and Stock ROM:
1. Download the firmware Galaxy A50s (SM-A507FN).
2. Unzip the firmware and copy the AP tar file to your device. It is normally named as AP_[device_model_sw_ver].tar.md5. Copy AP tar file and MagiskManager-v7.3.4.apk to your phone.
3. Install Magisk Manager ( MagiskManager-v7.3.4.apk ) on your phone.
4. In Magisk Manager: Install → Install → Select and Patch a File
5. Select the AP tar file. Magisk Manager will patch the whole firmware file and store the output to [Internal Storage]/Download/magisk_patched.tar. Copy magisk_patched.tar the tar file to your PC
6. Reboot to Bootloader: Turn Power Off. Press and hold Volume Up key + Power Key, When Samsung Logo appears release Power Key only, keep pressing Volume Up key until Android Recovery Mode Appears. Select Reboot to bootloader. Connect the phone to PC using USB Cable.
7. Flash magisk_patched.tar as AP in ODIN, together with the BL, CP and HOME_CSC files. Never flash only an AP file, as Odin can shrink your /data file-system if you do.
8. Important: Uncheck “Auto Reboot” in Options!
9. Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
10. Full data wipe is mandatory! Do not skip this step.
Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key in the Android Logo screen with text "Erasing", when screen blank again Press and Hold Volume Up + Power key. When Samsung Logo appears release Power Key only, keep pressing Volume Up key until Android Recovery Mode Appears. Select Wipe data / Factory reset.
11. This time to boot to the system with Magisk. Select Reboot system now, and immediately press the Volume Up + Power key, After seeing the bootloader warning screen, release all keys so it can boot to the system.
12. After the device is booted up, do the usual initial setup. It need more time and patient. After finished, You will see Magisk Manager app in app drawer. If not, Install it manually.
13. Connect the phone to Internet, If you can not see Magisk Manager, Install it manually and Open Magisk Manager. It will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
14. Done! You can use Root Checker to check it, Enjoy!
Watch this video https://youtu.be/_psSLUiCZi0
It look like not easy for pressing key combination, so you need read and watch it
Note: Magisk v20 does not work on A50s, don't update it to Magisk v20. FYI: Magisk v20 works stable on A50 and A6 that I have tested. Share here if someone can fix it
This is not A50s group . This is A50 thread
immortalized2018 said:
This is not A50s group . This is A50 thread
Click to expand...
Click to collapse
Well it's same processor same specification.Only 1+ later.
---------- Post added at 11:07 PM ---------- Previous post was at 11:06 PM ----------
redymedan said:
Complete Guide for Rooting Samsung Galaxy A50s using Magisk only ( tested on SM-A507FN ), You need Latest Magisk Manager ( MagiskManager-v7.3.4.apk ) and Stock ROM:
1. Download the firmware Galaxy A50s (SM-A507FN).
2. Unzip the firmware and copy the AP tar file to your device. It is normally named as AP_[device_model_sw_ver].tar.md5. Copy AP tar file and MagiskManager-v7.3.4.apk to your phone.
3. Install Magisk Manager ( MagiskManager-v7.3.4.apk ) on your phone.
4. In Magisk Manager: Install → Install → Select and Patch a File
5. Select the AP tar file. Magisk Manager will patch the whole firmware file and store the output to [Internal Storage]/Download/magisk_patched.tar. Copy magisk_patched.tar the tar file to your PC
6. Reboot to Bootloader: Turn Power Off. Press and hold Volume Up key + Power Key, When Samsung Logo appears release Power Key only, keep pressing Volume Up key until Android Recovery Mode Appears. Select Reboot to bootloader. Connect the phone to PC using USB Cable.
7. Flash magisk_patched.tar as AP in ODIN, together with the BL, CP and HOME_CSC files. Never flash only an AP file, as Odin can shrink your /data file-system if you do.
8. Important: Uncheck “Auto Reboot” in Options!
9. Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
10. Full data wipe is mandatory! Do not skip this step.
Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key in the Android Logo screen with text "Erasing", when screen blank again Press and Hold Volume Up + Power key. When Samsung Logo appears release Power Key only, keep pressing Volume Up key until Android Recovery Mode Appears. Select Wipe data / Factory reset.
11. This time to boot to the system with Magisk. Select Reboot system now, and immediately press the Volume Up + Power key, After seeing the bootloader warning screen, release all keys so it can boot to the system.
12. After the device is booted up, do the usual initial setup. It need more time and patient. After finished, You will see Magisk Manager app in app drawer. If not, Install it manually.
13. Connect the phone to Internet, If you can not see Magisk Manager, Install it manually and Open Magisk Manager. It will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
14. Done! You can use Root Checker to check it, Enjoy!
Watch this video
It look like not easy for pressing key combination, so you need read and watch it
Click to expand...
Click to collapse
Noce jobe my friend
immortalized2018 said:
This is not A50s group . This is A50 thread
Click to expand...
Click to collapse
So, show me the A50s group? You know A50s group does not available right now. It will be moved when A50s group was available. Hi @MikeChannon please move this thread when A50s group has available.
immortalized2018 said:
This is not A50s group . This is A50 thread
Click to expand...
Click to collapse
redymedan said:
So, show me the A50s group? You know A50s group does not available right now. It will be moved when A50s group was available. Hi @MikeChannon please move this thread when A50s group has available.
Click to expand...
Click to collapse
Yes we can move it if we add the A50s (you might need to remind us though)
It's quite common to create a device thread in a "close-match" forum while waiting to see if a new (more precise device) forum is created.
So long as the thread is clearly titled (as this one is) then it's ok.
Mike
@redymedan Very nice works !!
i will try this but i have some concern before root my phone that are
- How can i fully backup all my app and appdata?
the root require full wipe data , factory reset , it is hard for backup everything when we dont have twrp for a50s yet (im not sure if it also require to full wipe when install twrp) and adb backup method only backup some playstore app but not the outside app , or some apps that developer dont give permission to adb backup such as steam
- and what can i do if i accident get bootloop or soft brick? does flash a stock rom will fix these?
HansKila said:
@redymedan Very nice works !!
i will try this but i have some concern before root my phone that are
- How can i fully backup all my app and appdata?
the root require full wipe data , factory reset , it is hard for backup everything when we dont have twrp for a50s yet (im not sure if it also require to full wipe when install twrp) and adb backup method only backup some playstore app but not the outside app , or some apps that developer dont give permission to adb backup such as steam
- and what can i do if i accident get bootloop or soft brick? does flash a stock rom will fix these?
Click to expand...
Click to collapse
For backup all your data, you can try Samsung Smart Switch and If something goes wrong like bootloop, soft brick, Just flash the ROM to make it works again.
@redymedan ok im already backed up all my apps
and have a rom ready to patch but i dont know how to extract the rom to get AP tar file
i downloaded it by sam firm from xda , and its extension is .zip.enc4 and cant be open by 7zip
HansKila said:
@redymedan ok im already backed up all my apps
and have a rom ready to patch but i dont know how to extract the rom to get AP tar file
i downloaded it by sam firm from xda , and its extension is .zip.enc4 and cant be open by 7zip
Click to expand...
Click to collapse
Right click and select extract here or extract to same name with the file name, It will create a folder like the file name. Make sure 7zip installed on your PC
redymedan said:
Right click and select extract here or extract to same name with the file name, It will create a folder like the file name. Make sure 7zip installed on your PC
Click to expand...
Click to collapse
im in step Flashing with Odin , it said something like : only official released binaries are allowed to be flashed
then it stuck , i press down and home to cancel and restart but now it stuck in a screen with the below text:
An error has occurred while updating the device software. Use the Emergency recovery funtion in the Smrt Switch PC software
I tried to use Smart switch but on pc it said unsupported device
What can i do now ?
EDIT : Flash stockrom and everything is ok , but when i tried to flash patched file again , it still stuck in : only official released binaries are allowed to be flashed
HansKila said:
im in step Flashing with Odin , it said something like : only official released binaries are allowed to be flashed
then it stuck , i press down and home to cancel and restart but now it stuck in a screen with the below text:
An error has occurred while updating the device software. Use the Emergency recovery funtion in the Smrt Switch PC software
I tried to use Smart switch but on pc it said unsupported device
What can i do now ?
EDIT : Flash stockrom and everything is ok , but when i tried to flash patched file again , it still stuck in : only official released binaries are allowed to be flashed
Click to expand...
Click to collapse
Make sure the bootloader are unlocked, It look like the bootloader locked
redymedan said:
Make sure the bootloader are unlocked, It look like the bootloader locked
Click to expand...
Click to collapse
I success rooted my phone now after 3~4 kind of softbrick and fail odin flash , i thi k it is something about oem bootloader unlock
Will be back in 1 or 2 week to test if it randomly reboot or softbrick again , also to check my heart status
Thank you for the guide and your help
HansKila said:
@redymedan ok im already backed up all my apps
and have a rom ready to patch but i dont know how to extract the rom to get AP tar file
i downloaded it by sam firm from xda , and its extension is .zip.enc4 and cant be open by 7zip
Click to expand...
Click to collapse
Hi @HansKila I just created video how to decrypt ENC4 file using SamFirm tool, watch this https://youtu.be/QmiF9wMbikw
How to update after root?
Bazz27 said:
How to update after root?
Click to expand...
Click to collapse
You mean firmware update??When root or twrp flashing device you can't update firmware.Only whit odin you can flash new firmware.
muhamet said:
You mean firmware update??When root or twrp flashing device you can't update firmware.Only whit odin you can flash new firmware.
Click to expand...
Click to collapse
Does flashing new firmware will unroot my phone?
HansKila said:
Does flashing new firmware will unroot my phone?
Click to expand...
Click to collapse
Yes
thanks a lot
redymedan said:
Complete Guide for Rooting Samsung Galaxy A50s using Magisk only ( tested on SM-A507FN ), You need Latest Magisk Manager ( MagiskManager-v7.3.4.apk ) and Stock ROM:
1. Download the firmware Galaxy A50s (SM-A507FN).
2. Unzip the firmware and copy the AP tar file to your device. It is normally named as AP_[device_model_sw_ver].tar.md5. Copy AP tar file and MagiskManager-v7.3.4.apk to your phone.
3. Install Magisk Manager ( MagiskManager-v7.3.4.apk ) on your phone.
4. In Magisk Manager: Install → Install → Select and Patch a File
5. Select the AP tar file. Magisk Manager will patch the whole firmware file and store the output to [Internal Storage]/Download/magisk_patched.tar. Copy magisk_patched.tar the tar file to your PC
6. Reboot to Bootloader: Turn Power Off. Press and hold Volume Up key + Power Key, When Samsung Logo appears release Power Key only, keep pressing Volume Up key until Android Recovery Mode Appears. Select Reboot to bootloader. Connect the phone to PC using USB Cable.
7. Flash magisk_patched.tar as AP in ODIN, together with the BL, CP and HOME_CSC files. Never flash only an AP file, as Odin can shrink your /data file-system if you do.
8. Important: Uncheck “Auto Reboot” in Options!
9. Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
10. Full data wipe is mandatory! Do not skip this step.
Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key in the Android Logo screen with text "Erasing", when screen blank again Press and Hold Volume Up + Power key. When Samsung Logo appears release Power Key only, keep pressing Volume Up key until Android Recovery Mode Appears. Select Wipe data / Factory reset.
11. This time to boot to the system with Magisk. Select Reboot system now, and immediately press the Volume Up + Power key, After seeing the bootloader warning screen, release all keys so it can boot to the system.
12. After the device is booted up, do the usual initial setup. It need more time and patient. After finished, You will see Magisk Manager app in app drawer. If not, Install it manually.
13. Connect the phone to Internet, If you can not see Magisk Manager, Install it manually and Open Magisk Manager. It will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
14. Done! You can use Root Checker to check it, Enjoy!
Click to expand...
Click to collapse
I'm stuck at point 7: what does it mean al that words (BL, CP and HOME_CSC)? In my odin screen I have this options: Bootloader,PDA, Phone,CSC (I can't upload images because I'm a new user )
5im1 said:
I'm stuck at point 7: what does it mean al that words (BL, CP and HOME_CSC)? In my odin screen I have this options: Bootloader,PDA, Phone,CSC (I can't upload images because I'm a new user )
Click to expand...
Click to collapse
Extract the firmware files that are consist of 5 files, BL, AP, CP, CSC_OMC and HOME-CSC, then patch AP file with Magisk Manager on Your phone, then you will get magisk_patched.tar file, Now flash the file together with BL, CP, CSC_OMC or HOME_CSC, on AP slot you put magisk_patched.tar file.
For clearly I suggest you watch the Video
One UI 3.0 stable has been released for Galaxy Z Fold2! You may check for updates in your Settings. If it's not available yet in your region, please check the following steps:
Video tutorial:
1. Download and extract both Frija and Odin.
2. Launch Frija.
3. Check the "Auto" button. Write your device's Model Number and CSC
(Your model number is at Settings, then About phone).
4. Click on "Check Update".
5. Click on "Download" and choose a folder to save the firmware.
6. After the download is complete, extract the firmware .zip.
7. Launch Odin.
8. Click the "BL" button and select the file that starts with "BL_...".
9. Click the "AP" button and select the file that starts with "AP_...".
10. Click the "CP" button and select the file that starts with "CP_...".
11. Click the "CSC" button and select the file that starts with "HOME_CSC_..." (Selecting CSC_... will wipe your data!).
12. Turn off your phone.
13. Boot into Download Mode by holding both Volume Up + Volume Down buttons and then connecting it to your PC.
14. After booting into Download Mode, press the Volume Up button to continue.
15. Back to Odin, click "Start".
16. The flashing process will be over when "PASS" is shown in Odin and your phone reboots. You may close Odin and disconnect the phone from your PC then.
17. Congrats! You have successfully flashed the latest update to your device.
18. After your phone is on, turn it off again.
19. Boot into Recovery Mode by connecting to your PC and holding Volume Up + Power Button (+ Bixby Button).
20. Navigating with the Volume Buttons and selecting with the Power Button, go to "Wipe cache partition".
21. Select "Yes".
22. Select "Reboot system now".
Links:
Odin 3 by Samsung:
Index of /samsung-tools/
Frija by @invmini :
[Tool] Frija - Samsung firmware downloader/checker
* * * PLEASE UNDERSTAND WHAT YOU ARE INSTALLING TO YOUR DEVICES AT ALL TIMES AND ME AND THE DEVELOPER ARE NOT RESPONSIBLE FOR ANY SORT OF DAMAGE TO YOUR DEVICE * * * Hey Guys :) Frija is a new tool (successor of now depreciated tool SamFirm)...
forum.xda-developers.com
CSCs Cheat Sheet:
List of Samsung Galaxy CSC Country Specific Product code and region they belong to
List of CSC Country Specific code for Samsung Galaxy & various countries, regions, network carriers, model numbers, variants phone belong to.
www.androidsage.com
---- BEFORE STABLE UPDATE ----
One UI 3.0 beta has been released for Galaxy Z Fold2 5G.
If you are part of the supported regions, you can grab the update link and share it here (for each update).
These are the steps I borrowed from @AhmedMomen 's S10 thread.
How to capture the update.zip file to share with other people:
1. Download HTTP canary app from Play Store.
2. Open HTTP Canary app.
3. Start the update by pressing "Download". Don't pause it!
4. Go back to Canary app and start it. It will grab the link for you.
5. Please share the link and your model number here!
As for how to sideload the update.zip file, I have explained it step-by-step here:
ADB Method:
1. Download and install adb.
2. Connect your phone to your PC.
3. Download the update file where you have installed adb Platform Tools.
4. Rename the file (including the extension) to "update.zip". Click "Yes" on the prompt.
5. Open your terminal of choice.
6. Type "adb reboot recovery" and press ENTER on your keyboard. Wait for your phone to reboot to recovery mode.
7. Navigating with the volume buttons and selecting with the power button, go to "Apply update via ADB".
8. Back to the terminal on your PC type "adb sideload update.zip". (NOTE: If it says that device is not connected, just remove and put the USB cable back until it works).
9. The update is being installed. It will be completed when the phone boots up. You may use your phone normally after.
10. Report any bugs on the Samsung Members app! https://www.samsung.com/global/galaxy/apps/samsung-members/
SD Card Method:
1. Search for an update file. You can usually find one in XDA Forums.
2. Check if you have the right build and open the right link.
3. Download the update file (.bin extension).
4. Move the update file to your SD Card. (NOTE: If you are getting errors, back up the stuff of your SD Card and format it from your Galaxy phone.)
5. Rename the .bin file (including the extension) to "update.zip". Click "Change" on the prompt.
6. Reboot to Recovery Mode, by connecting your phone to another device (such as your earphones) and holding the Volume Up + Power (+ Bixby) buttons.
7. Navigating with the volume buttons and selecting with the power button, go to "Apply update via SD Card".
8. Navigate to and select "update.zip".
9. The update will start installing. It will be completed when the phone boots up. You may use your phone normally after.
10. Report any bugs on the Samsung Members app! https://www.samsung.com/global/galaxy/apps/samsung-members/
Thank you for your support and I hope I helped you!
I don't think it has been released anywhere except Korea, it's not even showing in Samsung Members for us lol.. Misleading title...
megaghostgamer said:
I don't think it has been released anywhere except Korea, it's not even showing in Samsung Members for us lol.. Misleading title...
Click to expand...
Click to collapse
Sorry about that. I updated the title!
Update the stable updates out in Germany
cooldude20000 said:
Update the stable updates out in Germany
Click to expand...
Click to collapse
Thank you for the information! I updated the main post.
Hi I have the Korean Variant KT can I just use KOO variant to flash it