Hello everyone,
I tried but I have not found,
I want a galaxy s rooter I9000BVJVC 2.3.5 and I do not know how, Odin does not seem to do ... Can someone tell me what to do?
Thank you in advance
After an intense examination of this thread, it has been determined that it does not contain development, thus does not belong in development. We are moving it for you, but please make sure you post correctly next time.
1. follow the instructions in the text file, HOWEVER,
2. if you have already done the kies mini update, skip that part and simply go in the phone and change the usb settings to use kies when plugged in.
3. reboot phone holding volume down, home, and power. this will allow the phone to go into download mode.
4. After the phone reboots, shut it down and hold the volume down and power button to boot into recovery mode.
5. navigate to the flashable_root_package (in recovery volume= up and down, power= select, and menu = back) select install zip from sdcard, then select "choose zip from sdcard", scroll down until you find "flashable_root_package.zip. Select this file and let it run.
6. Reboot the phone and you are all done!
Code:
http://forum.xda-developers.com/attachment.php?attachmentid=777681&d=1320871084
How to install Android 7 on the Galaxy S7 Edge G935A Att
Your phone is still not getting the Android 7 update...... – here is a simple way to install it manually
Download files
1. Download the G935AUCS4APK1.zip android 6 firmware from here:
https://drive.google.com/drive/u/0/folders/0BwZiuHd8AO5KYjBRczBLN3lNZWs
or from any other place
2. Copy the upgrade firmware from G935AUCS4APK1.zip to Android 7 SS-G935AUCS4APK1-to-U4BQA6.zip from here:
https://www.androidfilehost.com/?fid=457095661767134163
• Rename the SS-G935AUCS4APK1-to-U4BQA6.zip to update.zip
• Open a directory in the root directory of a microsd and move update.zip to it.
• Insert the microsd to your phone.
3. Copy the latest ODIN from here:
http://razintech.com/download-odin-flashing-tool-all-versions-free/
Installation
1. Enable USB DEBUG in the phone
2. In your computer install the Samsung USB drivers.
3. Go to download Mode by pushing and holding the: home+power+vol dn
4. Install the ODIN in your computer.
5. Copy the content of the G935AUCS4APK1.zip to the Odin directory in your comp
6. Open the ODIN and click on the BL and load the BL file then clock on AP and load the AP file then click on the CP and load the CP file then click on the CSC and load the CSC file. Don’t change anything else in the ODIN
7. Click start and wait till it done.
8. Enter the phone into RECOVERY MODE by clicking home+power+vol DN and when the screen will become dark release and hold the home+power+vol up
9. You will enter into the RECOVERY MODE – click on “apply update from external storage” then go to the fota dir and select the upate.zip
10. Wait till it done and click on reboot the system.
That’s all. It will look MUCH better now and if you had wifi psw lost issue like I had it will solve and also other issues will be solved. Enjoy it
yosiraz said:
How to install Android 7 on the Galaxy S7 Edge G935A Att
Your phone is still not getting the Android 7 update...... – here is a simple way to install it manually
Download files
1.Download the G935AUCS4APK1.zip android 6 firmware from here:
https://drive.google.com/drive/u/0/folders/0BwZiuHd8AO5KYjBRczBLN3lNZWs
or from any other place
2.Copy the upgrade firmware from G935AUCS4APK1.zip to Android 7 SS-G935AUCS4APK1-to-U4BQA6.zip from here:
https://www.androidfilehost.com/?fid=457095661767134163
•Rename the SS-G935AUCS4APK1-to-U4BQA6.zip to update.zip
•Open a directory in the root directory of a microsd and move update.zip to it.
•Insert the microsd to your phone.
3.Copy the latest ODIN from here:
http://razintech.com/download-odin-flashing-tool-all-versions-free/
Installation
1.Enable USB DEBUG in the phone
2.In your computer install the Samsung USB drivers.
3.Go to download Mode by pushing and holding the: home+power+vol dn
4.Install the ODIN in your computer.
5.Copy the content of the G935AUCS4APK1.zip to the Odin directory in your comp
6.Open the ODIN and click on the BL and load the BL file then clock on AP and load the AP file then click on the CP and load the CP file then click on the CSC and load the CSC file. Don’t change anything else in the ODIN
7.Click start and wait till it done.
8.Enter the phone into RECOVERY MODE by clicking home+power+vol DN and when the screen will become dark release and hold the home+power+vol up
9.You will enter into the RECOVERY MODE – click on “apply update from external storage” then go to the fota dir and select the upate.zip
10.Wait till it done and click on reboot the system.
That’s all. It will look MUCH better now and if you had wifi psw lost issue like I had it will solve and also other issues will be solved. Enjoy it
Click to expand...
Click to collapse
Or you can odin strate to Nougat from here: http://forum.xda-developers.com/showthread.php?p=71343011
Clicking from Edge of Galaxy
It would also help if this wasn't regurgitated info from a thread that is still on the first page of this exact section...
I forgot to turn on usb debugging like an idiot and i am stuck in a bootloop. what can i do?
Today i will be showing you how to fix a bricked LGK8 (2017 model). This will work for you if you have bricked with SuperSU or custom roms.
1) First of all you will need a working computer running Windows (10 is recommended).
2) Download all the needed files at this Mediafire link Today i will be showing you how to fix a bricked LGK8 (2017 model). This will work for you if you have bricked with SuperSU or custom roms.
1) First of all you will need a working computer running Windows (10 is recommended).
2) Download all the needed files at this Mediafire link Today i will be showing you how to fix a bricked LGK8 (2017 model). This will work for you if you have bricked with SuperSU or custom roms.
1) First of all you will need a working computer running Windows (10 is recommended).
2) Download all the needed files at this Mediafire link "file/1q394stxkmjn6xx/LG%20K350n%20K8.rar"
(Link was blocked just add mediafire stuff at the start, Sorry)
3) Install the drivers and installer in the download.
4) Turn off your device, Once it is off hold the volume up button and plug your phone into your computer while still holding the volume up button.
5) You should now see the LG logo and "Download Mode" at the bottom of the screen. A menu will popup and it will say "Firmware Update"
6) "DO NOT!" unplug your device from the computer.
7) Open up LGUP on your computer (We installed this earlier, It was in the download folder)..
8) LGUP will open and you should see a line where it says Version "K35010g" and Progress "STANDBY"
9) Go to the bottom of the menu where it says "BIN File", click on the text and you will see a option to select a ".kdz" file.
10) Select the file that was in the download named "K350n10g_00_0504.kdz"
11) Once it is selected and you see the file name in the File Path menu Click "UPGRADE" above it.
12) Now click "Start" DO NOT UNPLUG YOUR DEVICE AT THIS TIME.
13) Wait for the process to complete, It may take several minutes.
14) Once all is done your device is now ready to be used again. You have completed the unbrick.
PS: Do not unplug until your device boots to Setup or Lock Screen or Home Screen.
3) Install the drivers and installer in the download.
4) Turn off your device, Once it is off hold the volume up button and plug your phone into your computer while still holding the volume up button.
5) You should now see the LG logo and "Download Mode" at the bottom of the screen. A menu will popup and it will say "Firmware Update"
6) "DO NOT!" unplug your device from the computer.
7) Open up LGUP on your computer (We installed this earlier, It was in the download folder)..
8) LGUP will open and you should see a line where it says Version "K35010g" and Progress "STANDBY"
9) Go to the bottom of the menu where it says "BIN File", click on the text and you will see a option to select a ".kdz" file.
10) Select the file that was in the download named "K350n10g_00_0504.kdz"
11) Once it is selected and you see the file name in the File Path menu Click "UPGRADE" above it.
12) Now click "Start" DO NOT UNPLUG YOUR DEVICE AT THIS TIME.
13) Wait for the process to complete, It may take several minutes.
14) Once all is done your device is now ready to be used again. You have completed the unbrick.
PS: Do not unplug until your device boots to Setup or Lock Screen or Home Screen.
3) Install the drivers and installer in the download.
4) Turn off your device, Once it is off hold the volume up button and plug your phone into your computer while still holding the volume up button.
5) You should now see the LG logo and "Download Mode" at the bottom of the screen. A menu will popup and it will say "Firmware Update"
6) "DO NOT!" unplug your device from the computer.
7) Open up LGUP on your computer (We installed this earlier, It was in the download folder)..
8) LGUP will open and you should see a line where it says Version "K35010g" and Progress "STANDBY"
9) Go to the bottom of the menu where it says "BIN File", click on the text and you will see a option to select a ".kdz" file.
10) Select the file that was in the download named "K350n10g_00_0504.kdz"
11) Once it is selected and you see the file name in the File Path menu Click "UPGRADE" above it.
12) Now click "Start" DO NOT UNPLUG YOUR DEVICE AT THIS TIME.
13) Wait for the process to complete, It may take several minutes.
14) Once all is done your device is now ready to be used again. You have completed the unbrick.
PS: Do not unplug until your device boots to Setup or Lock Screen or Home Screen.
Visit this link for Rooting A50s with Magisk v19.3 ( Magisk Manager Custom Channel Update ):
https://forum.xda-developers.com/galaxy-a50s/how-to/guide-root-galaxy-a50s-magisk-v19-3-t4001271
Complete Guide for Rooting Samsung Galaxy A50s using Magisk only ( tested on SM-A507FN ), You need Latest Magisk Manager ( MagiskManager-v7.3.4.apk ) and Stock ROM:
1. Download the firmware Galaxy A50s (SM-A507FN).
2. Unzip the firmware and copy the AP tar file to your device. It is normally named as AP_[device_model_sw_ver].tar.md5. Copy AP tar file and MagiskManager-v7.3.4.apk to your phone.
3. Install Magisk Manager ( MagiskManager-v7.3.4.apk ) on your phone.
4. In Magisk Manager: Install → Install → Select and Patch a File
5. Select the AP tar file. Magisk Manager will patch the whole firmware file and store the output to [Internal Storage]/Download/magisk_patched.tar. Copy magisk_patched.tar the tar file to your PC
6. Reboot to Bootloader: Turn Power Off. Press and hold Volume Up key + Power Key, When Samsung Logo appears release Power Key only, keep pressing Volume Up key until Android Recovery Mode Appears. Select Reboot to bootloader. Connect the phone to PC using USB Cable.
7. Flash magisk_patched.tar as AP in ODIN, together with the BL, CP and HOME_CSC files. Never flash only an AP file, as Odin can shrink your /data file-system if you do.
8. Important: Uncheck “Auto Reboot” in Options!
9. Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
10. Full data wipe is mandatory! Do not skip this step.
Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key in the Android Logo screen with text "Erasing", when screen blank again Press and Hold Volume Up + Power key. When Samsung Logo appears release Power Key only, keep pressing Volume Up key until Android Recovery Mode Appears. Select Wipe data / Factory reset.
11. This time to boot to the system with Magisk. Select Reboot system now, and immediately press the Volume Up + Power key, After seeing the bootloader warning screen, release all keys so it can boot to the system.
12. After the device is booted up, do the usual initial setup. It need more time and patient. After finished, You will see Magisk Manager app in app drawer. If not, Install it manually.
13. Connect the phone to Internet, If you can not see Magisk Manager, Install it manually and Open Magisk Manager. It will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
14. Done! You can use Root Checker to check it, Enjoy!
Watch this video https://youtu.be/_psSLUiCZi0
It look like not easy for pressing key combination, so you need read and watch it
Note: Magisk v20 does not work on A50s, don't update it to Magisk v20. FYI: Magisk v20 works stable on A50 and A6 that I have tested. Share here if someone can fix it
This is not A50s group . This is A50 thread
immortalized2018 said:
This is not A50s group . This is A50 thread
Click to expand...
Click to collapse
Well it's same processor same specification.Only 1+ later.
---------- Post added at 11:07 PM ---------- Previous post was at 11:06 PM ----------
redymedan said:
Complete Guide for Rooting Samsung Galaxy A50s using Magisk only ( tested on SM-A507FN ), You need Latest Magisk Manager ( MagiskManager-v7.3.4.apk ) and Stock ROM:
1. Download the firmware Galaxy A50s (SM-A507FN).
2. Unzip the firmware and copy the AP tar file to your device. It is normally named as AP_[device_model_sw_ver].tar.md5. Copy AP tar file and MagiskManager-v7.3.4.apk to your phone.
3. Install Magisk Manager ( MagiskManager-v7.3.4.apk ) on your phone.
4. In Magisk Manager: Install → Install → Select and Patch a File
5. Select the AP tar file. Magisk Manager will patch the whole firmware file and store the output to [Internal Storage]/Download/magisk_patched.tar. Copy magisk_patched.tar the tar file to your PC
6. Reboot to Bootloader: Turn Power Off. Press and hold Volume Up key + Power Key, When Samsung Logo appears release Power Key only, keep pressing Volume Up key until Android Recovery Mode Appears. Select Reboot to bootloader. Connect the phone to PC using USB Cable.
7. Flash magisk_patched.tar as AP in ODIN, together with the BL, CP and HOME_CSC files. Never flash only an AP file, as Odin can shrink your /data file-system if you do.
8. Important: Uncheck “Auto Reboot” in Options!
9. Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
10. Full data wipe is mandatory! Do not skip this step.
Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key in the Android Logo screen with text "Erasing", when screen blank again Press and Hold Volume Up + Power key. When Samsung Logo appears release Power Key only, keep pressing Volume Up key until Android Recovery Mode Appears. Select Wipe data / Factory reset.
11. This time to boot to the system with Magisk. Select Reboot system now, and immediately press the Volume Up + Power key, After seeing the bootloader warning screen, release all keys so it can boot to the system.
12. After the device is booted up, do the usual initial setup. It need more time and patient. After finished, You will see Magisk Manager app in app drawer. If not, Install it manually.
13. Connect the phone to Internet, If you can not see Magisk Manager, Install it manually and Open Magisk Manager. It will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
14. Done! You can use Root Checker to check it, Enjoy!
Watch this video
It look like not easy for pressing key combination, so you need read and watch it
Click to expand...
Click to collapse
Noce jobe my friend
immortalized2018 said:
This is not A50s group . This is A50 thread
Click to expand...
Click to collapse
So, show me the A50s group? You know A50s group does not available right now. It will be moved when A50s group was available. Hi @MikeChannon please move this thread when A50s group has available.
immortalized2018 said:
This is not A50s group . This is A50 thread
Click to expand...
Click to collapse
redymedan said:
So, show me the A50s group? You know A50s group does not available right now. It will be moved when A50s group was available. Hi @MikeChannon please move this thread when A50s group has available.
Click to expand...
Click to collapse
Yes we can move it if we add the A50s (you might need to remind us though)
It's quite common to create a device thread in a "close-match" forum while waiting to see if a new (more precise device) forum is created.
So long as the thread is clearly titled (as this one is) then it's ok.
Mike
@redymedan Very nice works !!
i will try this but i have some concern before root my phone that are
- How can i fully backup all my app and appdata?
the root require full wipe data , factory reset , it is hard for backup everything when we dont have twrp for a50s yet (im not sure if it also require to full wipe when install twrp) and adb backup method only backup some playstore app but not the outside app , or some apps that developer dont give permission to adb backup such as steam
- and what can i do if i accident get bootloop or soft brick? does flash a stock rom will fix these?
HansKila said:
@redymedan Very nice works !!
i will try this but i have some concern before root my phone that are
- How can i fully backup all my app and appdata?
the root require full wipe data , factory reset , it is hard for backup everything when we dont have twrp for a50s yet (im not sure if it also require to full wipe when install twrp) and adb backup method only backup some playstore app but not the outside app , or some apps that developer dont give permission to adb backup such as steam
- and what can i do if i accident get bootloop or soft brick? does flash a stock rom will fix these?
Click to expand...
Click to collapse
For backup all your data, you can try Samsung Smart Switch and If something goes wrong like bootloop, soft brick, Just flash the ROM to make it works again.
@redymedan ok im already backed up all my apps
and have a rom ready to patch but i dont know how to extract the rom to get AP tar file
i downloaded it by sam firm from xda , and its extension is .zip.enc4 and cant be open by 7zip
HansKila said:
@redymedan ok im already backed up all my apps
and have a rom ready to patch but i dont know how to extract the rom to get AP tar file
i downloaded it by sam firm from xda , and its extension is .zip.enc4 and cant be open by 7zip
Click to expand...
Click to collapse
Right click and select extract here or extract to same name with the file name, It will create a folder like the file name. Make sure 7zip installed on your PC
redymedan said:
Right click and select extract here or extract to same name with the file name, It will create a folder like the file name. Make sure 7zip installed on your PC
Click to expand...
Click to collapse
im in step Flashing with Odin , it said something like : only official released binaries are allowed to be flashed
then it stuck , i press down and home to cancel and restart but now it stuck in a screen with the below text:
An error has occurred while updating the device software. Use the Emergency recovery funtion in the Smrt Switch PC software
I tried to use Smart switch but on pc it said unsupported device
What can i do now ?
EDIT : Flash stockrom and everything is ok , but when i tried to flash patched file again , it still stuck in : only official released binaries are allowed to be flashed
HansKila said:
im in step Flashing with Odin , it said something like : only official released binaries are allowed to be flashed
then it stuck , i press down and home to cancel and restart but now it stuck in a screen with the below text:
An error has occurred while updating the device software. Use the Emergency recovery funtion in the Smrt Switch PC software
I tried to use Smart switch but on pc it said unsupported device
What can i do now ?
EDIT : Flash stockrom and everything is ok , but when i tried to flash patched file again , it still stuck in : only official released binaries are allowed to be flashed
Click to expand...
Click to collapse
Make sure the bootloader are unlocked, It look like the bootloader locked
redymedan said:
Make sure the bootloader are unlocked, It look like the bootloader locked
Click to expand...
Click to collapse
I success rooted my phone now after 3~4 kind of softbrick and fail odin flash , i thi k it is something about oem bootloader unlock
Will be back in 1 or 2 week to test if it randomly reboot or softbrick again , also to check my heart status
Thank you for the guide and your help
HansKila said:
@redymedan ok im already backed up all my apps
and have a rom ready to patch but i dont know how to extract the rom to get AP tar file
i downloaded it by sam firm from xda , and its extension is .zip.enc4 and cant be open by 7zip
Click to expand...
Click to collapse
Hi @HansKila I just created video how to decrypt ENC4 file using SamFirm tool, watch this https://youtu.be/QmiF9wMbikw
How to update after root?
Bazz27 said:
How to update after root?
Click to expand...
Click to collapse
You mean firmware update??When root or twrp flashing device you can't update firmware.Only whit odin you can flash new firmware.
muhamet said:
You mean firmware update??When root or twrp flashing device you can't update firmware.Only whit odin you can flash new firmware.
Click to expand...
Click to collapse
Does flashing new firmware will unroot my phone?
HansKila said:
Does flashing new firmware will unroot my phone?
Click to expand...
Click to collapse
Yes
thanks a lot
redymedan said:
Complete Guide for Rooting Samsung Galaxy A50s using Magisk only ( tested on SM-A507FN ), You need Latest Magisk Manager ( MagiskManager-v7.3.4.apk ) and Stock ROM:
1. Download the firmware Galaxy A50s (SM-A507FN).
2. Unzip the firmware and copy the AP tar file to your device. It is normally named as AP_[device_model_sw_ver].tar.md5. Copy AP tar file and MagiskManager-v7.3.4.apk to your phone.
3. Install Magisk Manager ( MagiskManager-v7.3.4.apk ) on your phone.
4. In Magisk Manager: Install → Install → Select and Patch a File
5. Select the AP tar file. Magisk Manager will patch the whole firmware file and store the output to [Internal Storage]/Download/magisk_patched.tar. Copy magisk_patched.tar the tar file to your PC
6. Reboot to Bootloader: Turn Power Off. Press and hold Volume Up key + Power Key, When Samsung Logo appears release Power Key only, keep pressing Volume Up key until Android Recovery Mode Appears. Select Reboot to bootloader. Connect the phone to PC using USB Cable.
7. Flash magisk_patched.tar as AP in ODIN, together with the BL, CP and HOME_CSC files. Never flash only an AP file, as Odin can shrink your /data file-system if you do.
8. Important: Uncheck “Auto Reboot” in Options!
9. Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
10. Full data wipe is mandatory! Do not skip this step.
Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key in the Android Logo screen with text "Erasing", when screen blank again Press and Hold Volume Up + Power key. When Samsung Logo appears release Power Key only, keep pressing Volume Up key until Android Recovery Mode Appears. Select Wipe data / Factory reset.
11. This time to boot to the system with Magisk. Select Reboot system now, and immediately press the Volume Up + Power key, After seeing the bootloader warning screen, release all keys so it can boot to the system.
12. After the device is booted up, do the usual initial setup. It need more time and patient. After finished, You will see Magisk Manager app in app drawer. If not, Install it manually.
13. Connect the phone to Internet, If you can not see Magisk Manager, Install it manually and Open Magisk Manager. It will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
14. Done! You can use Root Checker to check it, Enjoy!
Click to expand...
Click to collapse
I'm stuck at point 7: what does it mean al that words (BL, CP and HOME_CSC)? In my odin screen I have this options: Bootloader,PDA, Phone,CSC (I can't upload images because I'm a new user )
5im1 said:
I'm stuck at point 7: what does it mean al that words (BL, CP and HOME_CSC)? In my odin screen I have this options: Bootloader,PDA, Phone,CSC (I can't upload images because I'm a new user )
Click to expand...
Click to collapse
Extract the firmware files that are consist of 5 files, BL, AP, CP, CSC_OMC and HOME-CSC, then patch AP file with Magisk Manager on Your phone, then you will get magisk_patched.tar file, Now flash the file together with BL, CP, CSC_OMC or HOME_CSC, on AP slot you put magisk_patched.tar file.
For clearly I suggest you watch the Video
Hey people. Just got my Realme8 and I'm trying to get the stock A.24 version but I'm stuck at A.22. I heard in a post that you can connect to a VPN and it will let you update? Is that correct? Or can we like update manually in sometype of way?
Want to force ? - ok ... can try next method
1. download the latest firmware update zip from offsite : https://www.realme.com/in/support/software-update
2. transfer the firmware to the phone internal storage /if not already directly downloaded/.
3. find the firmware file in File Manager and click on the firmware, then select Update Now...
---OR---
3. PowerOff
4. Press and hold the Power + Volume Down buttons simultaneously until your phone enters into the Recovery Mode.
5. In the Recovery menu, choose the language you want.
6. Next, select install from the storage device and find the firmware From phone storage
DaLiV said:
Want to force ? - ok ... can try next method
1. download the latest firmware update zip from offsite : https://www.realme.com/in/support/software-update
2. transfer the firmware to the phone internal storage /if not already directly downloaded/.
3. find the firmware file in File Manager and click on the firmware, then select Update Now...
---OR---
3. PowerOff
4. Press and hold the Power + Volume Down buttons simultaneously until your phone enters into the Recovery Mode.
5. In the Recovery menu, choose the language you want.
6. Next, select install from the storage device and find the firmware From phone storage
Click to expand...
Click to collapse
Can't find my device, there's no Realme 8 nor RMX3085 which is the model. Can I download it anywhere else?
Edit: if I do this, will my data be wiped?
can search there also
Realme Firmware Update (Stock ROM) - Realme Firmware
Flash your Realme phone with latest firmware rom (Flash File) via Realme Flashtool.
realmefirmware.com
that is inplace upgrade - OTA-Like ...
surely: backup of important data is always good idea, on EVERY update (here type has no matter) .... as issue may arrise from any incompatibility points ...