TelegramChannel: https://telegram.me/Nuclear ROM
G+ Community NuclearTeam
NEW TELEGRAM GROUP TO ROM SUPPORT
https://telegram.me/NucleaRomSupport
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this ROM/KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point your finger at me for messing up your device, I will laugh at you.
* BOOM! goes the dynamite
*/
Hi XDA community, we are proud to present our vision of LineageOS with features that we think are useful. Hope you enjoy our builds as much as we do.
The main goal of Nuclear Team is to provide a clean and fast ROM with nice and useful features.
[ ROM / KERNEL ] [ NOUGAT ] >< [ 7.1.2_r24] NucleaRom ><
By ® NuclearTeam ®
# Features:
• Based on LineageOs 14.1
• Android 7.1.2_r17
• Custom kernel included (Radioactive kernel)
• Custom ToolChains ROM/ KERNEL UBER/LINARO
• Nuclear Settings
• Customizable status bar (clock position, date, network indicators, battery style...) not yet implemented
• Gestures Anywhere
• Exclusive Nuclear Boot (thanks to zuk user Xals)
• Switch To Hide SuperSu from Status Bar
• Qualcomm Assertive Display
• Network traffic indicator
• Three finger swipe to screenshot
• Statusbar Clock Customizations
• add ability to disable bar color in battery saver mode
• Show cpu info
• Customize, Clear all on recents
• OmniSwitch as option for recents
• Proximity speaker
• Full OMS7 Suport RootLess
• Add Dashboard Settings(Suggestions, Summaries, Colums..)
• Dt2s everywhere on lockscreen
• All cm goodies
NOTE: this rom is in early stages like LineageOS 14.1 which is not even complete so espect some litte bugs and some functions may not work properly, just wait patiently till LineageOS 14.1 code is fully pushed to get a stable build, this builds are intended to bring an early taste of nougat ,if you want a tottally stable and bug free rom then this is not for you.
HOW TO BUG REPORT:
-If you have a major bug to report that has not been reported already, and is not a known issue with LineageOS,
please take the following steps to report it to us. It will save you time, as well as us.
-Download the Catlog app from the Play Store.
There is also a donate version which you can purchase to show appreciation.
-After downloading the Catlog app, go to the app settings, and change the log level to Debug.
-Clear all previous logs and take the exact steps to produce the error you are receiving.
-As soon as you receive the error (probably a force close), go straight into Catlog and stop the log recording.
-Copy and paste the entire log either to Hastebin or Pastebin
-Save the log, and copy and paste the link into the forum with a brief description of the error.
-You can also open trouble tickets on our website for bugs.
THINGS THAT ARE NOT SUPPORTED:
if you flash any mod or whatever please don't subbmit any bug report
# How to install: IMPORTANT: you need to come from marshmallow rom , if you are in lollipop you need to flash cm13 first and then follow the flash instructions
× Make a nandroid backup (optional but always recommended)
× Download ROM
× Download Gapps
× Wipe system,data,cache,dalvik
× Flash ROM
× Flash GApps
× Reboot
Updating:
× Flash ROM
× Reboot
Have fun....
Enjoy!
Special thanks to:
CyanogenMod
Lord Boeffla
Temasek
Ak
OrdenKrieger
ResurrectionRemix
XDA
Nuclear Team & testers
And a very special thanks to TugaPower
Anyone I might have forgotten (please let me know)
Who are NuclearTeam??
Main devs are @Moludo, @lozo2010 and @acuicultor is the kernel Dev.
If you want to buy us a beer/coffee you can donate Here all donations will serve to improve the rom.
Thanks to all donors!!!!
Please when do a donation tell your xda nickname in paypal message so i can give you proper credits here. Thanks.
Kernel Source: https://github.com/LineageOS/android_kernel_samsung_smdk4412
XDA:DevDB Information
NucleaRom, ROM for the Samsung Galaxy S III I9300
Contributors
moludo
Source Code: https://github.com/OneRomOne-N
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Cm13 Last Firm
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 1.0.3
Stable Release Date: 2017-03-28
Created 2017-03-28
Last Updated 2017-07-13
Reserved
Reserved
I think I should ask a little bit
1. Magisk compatible? Can use SuperSU?
2. Any screenshot?
3. What about any updates? As based from Los, are u will update it same as Los? Weekly?
4. I saw about kernel, is it based from Boeffla Kernel?
Thanks in advance
nice to see new rom here
but is kernel 3.4.x true or like others... it is mistake ??
can you give us screenshot?
Last Nightly CM13 Link?
CygnusHyoga said:
I think I should ask a little bit
1. Magisk compatible? Can use SuperSU?
2. Any screenshot?
3. What about any updates? As based from Los, are u will update it same as Los? Weekly?
4. I saw about kernel, is it based from Boeffla Kernel?
Thanks in advance
Click to expand...
Click to collapse
Magisk??really? Y es you can use supersu. But i recomended the lineageos su.
When i arrive home i send you any screenshots if you want. If you want I can send you from my principal phone.the ROM its the same.
Talking about the updates...its not my principal phone like I said..I recover the s3 to my child..nuclearom its active on various phones...I think that the updates goes with the other phone updates. I work...and I have live... With this I'm trying to say that the updates aren't going to be regulars... Weekly..I think.
No..its not based on boefla kernel...its mine. From lineage sources...
stalintlv said:
Last Nightly CM13 Link?
Click to expand...
Click to collapse
With the last snapshot you can to. On cm page you can find it. But only have to flash it if you don't have the last firm. Like any other ROM .
Hesham Sleem said:
nice to see new rom here
but is kernel 3.4.x true or like others... it is mistake ??
can you give us screenshot?
Click to expand...
Click to collapse
Yep...sorry...my mistake...I come from opo . and its 3.4.x.... Here its 3.0.x. Sorry.
Tapatalkeando, OPO power
Will try this ROM today. ?
Hi, can i ask, if i have the rom on Version 4.4.2 KitKat, i also need before to flash the CM13 Rom, and after this one or can i flash directly this one?
If you are con kk , you need the last mm firm, that its provided from cm13. The last snapshot...or last nightly. And yes you can flash it after cm13. Directly. With the pertinent wipes.
Tapatalkeando, OPO power
Is it official? I dont find it in nuclearom website..
Sent from my GT-I9300 using XDA-Developers Legacy app
zincholic said:
Is it official? I dont find it in nuclearom website..
Sent from my GT-I9300 using XDA-Developers Legacy app
Click to expand...
Click to collapse
It is unofficial build
zincholic said:
Is it official? I dont find it in nuclearom website..
Click to expand...
Click to collapse
Change language to Spanish in the web site then you will see S3 download section
moludo said:
Magisk??really? Y es you can use supersu. But i recomended the lineageos su.
When i arrive home i send you any screenshots if you want. If you want I can send you from my principal phone.the ROM its the same.
Talking about the updates...its not my principal phone like I said..I recover the s3 to my child..nuclearom its active on various phones...I think that the updates goes with the other phone updates. I work...and I have live... With this I'm trying to say that the updates aren't going to be regulars... Weekly..I think.
No..its not based on boefla kernel...its mine. From lineage sources...
With the last snapshot you can to. On cm page you can find it. But only have to flash it if you don't have the last firm. Like any other ROM .
Yep...sorry...my mistake...I come from opo . and its 3.4.x.... Here its 3.0.x. Sorry.
Tapatalkeando, OPO power
Click to expand...
Click to collapse
What is lineageos SU? In developer tab, root access only for adb no option for root app like other ROM.
Is it alternative way to root access by default?
Thanks in advance
Sent from my GT-I9300 using XDA-Developers Legacy app
zincholic said:
What is lineageos SU? In developer tab, root access only for adb no option for root app like other ROM.
Is it alternative way to root access by default?
Thanks in advance
Click to expand...
Click to collapse
You can use the official root method of lineage os to get root https://download.lineageos.org/extras
Ashley david said:
You can use the official root method of lineage os to get root https://download.lineageos.org/extras
Click to expand...
Click to collapse
Yes i have able to root by default..i just reboot after installation finish..
So far this rom run smoothly
Maybe in a couple of days i'll report any progress on battery life, etc
Sent from my GT-I9300 using XDA-Developers Legacy app
If you take a look, you will see that I am the main dev. In addition to the download link takes you to the team page. But yes, it is true that I have to update the page to English too. I do not have time for everything .... I've had a hard week. In this week I will do it all day.
Long ago lineage, decided to remove the serial root if you wanted. Since many users wanted a rootless rom for a variety of reasons. Those who wanted to root only had to flash a file once. And it survives system updates. You do not have to flash it every time.
Sent from my A0001 using Tapatalk
If I'm on Lineage Os based rom.. Do i need to go back to cm13 before flashing this rom ?
No. Only if you come from jb, kk, por something like that....if you dont hace the cm13 firm. If you have lineage con tour phone , you already have the firm.
Its like any of the others roms 7.x , lineage, resurrection...etc...you have to have the cm13 last firm to run on fine way.
Sent from my A0001 using Tapatalk
Nice to see NucleaRom growing and giving support for legacy devices. Keep it up bro!!
Related
Since the previous thread has been closed by fourm moderator for being too clumsy, i have created a new thread for the Lollipop ROM built from mijuu source. /*IM JUST MAINTAINING THIS THREAD. IM NOT BUILDING!!*/
Code:
/*
* ~ Please READ ME ~
*
* I do not guarantee any successful flashing. I am not responsible
* for bricked devices, dead SD cards, or a broken device. YOU are
* choosing to make these modifications, and if you point the finger
* at me for messing up your device, I will laugh at you. But I will try
* my best to explain all the necessities, so you won't mess up your Device.
*
* ~ END OF AGREEMENT ~
*/
Instructions:
! Download the zip file
! Make sure you have atleast 50% battery left
! Make sure you have backed up your current rom
! factory reset your device, erase delvik cache and format /system (if you are using philz recovery, use clean to install new rom)
! flash the ROM zip, GApps zip and SuperSU zip (preferably in this order)
! First boot takes around 10 - 15 minutes. Its normal.
New in V6
Coustamize navigation bar
Coustamize lockscreen shortcuts
Coustamize Quick Settings panel
Video Recording and Playback Works (working for me...)
Theme Engine works
Rom Download :
V1 - 18/12/2014
V2 - 23/12/2014
V3 - 31/12/2014
V4 - 05/01/2015
V5 - 13/01/2015 Mirror - MEGA
V6 - 03/02/2015 Mirror - MEGA
Gapps Download :
BaNkS minimal GApps for Lollipop
To Root :
SuperSU v2.45
Recovery Download :
philz_touch_6.43.4-moto_msm8960.img
XDA:DevDB Information
Mijuu CyanogenMod, ROM for the Motorola Atrix HD
Contributors
Aingaran, mijuu, IronTechmonkey
Source Code: https://github.com/mijuu/android_kernel_motorola_msm8960-common
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Unlocked Bootloader and Lollipop supported recovery
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: V6
Beta Release Date: 2015-02-03
Created 2015-02-07
Last Updated 2015-02-06
Good call on a new thread for this.
Might want to clarify though - your title lists mb886, but this is actually built on the old unified msm8960-jbbl source
ssuds said:
Good call on a new thread for this.
Might want to clarify though - your title lists mb886, but this is actually built on the old unified msm8960-jbbl source
Click to expand...
Click to collapse
First built was built from old unified msm8960-jbbl source. But later @Technofreak contacted @mijuu with the correct partition size and he updated it. Still it can be used for other msm8960_jbbl devices. Im not sure about Razr M though...
For more detail, Read comments in this Link
Aingaran said:
First built was built from old unified msm8960-jbbl source. But later @Technofreak contacted @mijuu with the correct partition size and he updated it. Still it can be used for other msm8960_jbbl devices. Im not sure about Razr M though...
For more detail, Read comments in this Link
Click to expand...
Click to collapse
I'm well aware of the partition size deal. If you take a look at the code, the common qcom source has been changed to reflect this. As you can see below, the old lines are commented out and the partition size is set to match the AHD.
Code:
#BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1560281088
#Atrix HD is 1283719168
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1283719168
More info here. As the source you've linked in your OP shows (and even the rom image filenames), this IS unified msm8960-jbbl source, not mb886 source.
Let me start off with this:
I do have the same problem with playing back videos from using dhacker's/official-cm12 source as well as screen casting.
WIth Mijuu's these issues don't even exist.
I wonder whats going to happen when 5.1 comes out, its supposed to fix some lag and memory management issues and random crashing.
Think about his source with that new version bump. Its going to be cool.
Nice and clean thread bro. Thanks
Sent from my SM-T320 with Tapatalk 4
finally a seprate thread now hwo is gonna maintain blisspop ? mijuu is kinda slow
I can maintain that too... Is that updated regularly?
Sent from my ATRIX HD using XDA Free mobile app
Aingaran said:
I can maintain that too... Is that updated regularly?
Sent from my ATRIX HD using XDA Free mobile app
Click to expand...
Click to collapse
Yes, @nprev420 maintains it through droid razr forums, he just recently updated it to 2.0.
Justatechie said:
Yes, @nprev420 maintains it through droid razr forums, he just recently updated it to 2.0.
Click to expand...
Click to collapse
I created a Thread for that too... here is the Link
Can abybody tell me, how to customize lockscreen shortcuts here, please? I have somehow lost my "dialer" shortcut from the lockscreen - and cannot bring it back ((
i must say mijuu did a great job introducing us the taste of lollipop when all we were hoping for official kit kat update, lollipop dont make me wanna try kitkat no more, i flashed the 23-12-2014 and using it as a daily driver with minor bugs here and there, he is making a great effort to contribute to the atrix hd family, thanks mijuu for everything.
ps:can anyone tell me if i update from 23-12 to 3-02 will i see a huge difference??
i really some customization options i hope mijuu shows up with it as no other rom is stable enough i might give blisspop a try or wait for a stable rom. thank you XDA DEVELOPERS
Legza said:
Can abybody tell me, how to customize lockscreen shortcuts here, please? I have somehow lost my "dialer" shortcut from the lockscreen - and cannot bring it back ((
Click to expand...
Click to collapse
settings, security ,lockscreen
Hassan Aftab said:
i must say mijuu did a great job introducing us the taste of lollipop when all we were hoping for official kit kat update, lollipop dont make me wanna try kitkat no more, i flashed the 23-12-2014 and using it as a daily driver with minor bugs here and there, he is making a great effort to contribute to the atrix hd family, thanks mijuu for everything.
ps:can anyone tell me if i update from 23-12 to 3-02 will i see a huge difference??
i really some customization options i hope mijuu shows up with it as no other rom is stable enough i might give blisspop a try or wait for a stable rom. thank you XDA DEVELOPERS
Click to expand...
Click to collapse
Yes the latest one is pretty much stable for normal use.. you will see some random reboots if use it heavily.. greenify will help you to avoid reboots..
how is the battery life in latest mijuu rom compared to others ?
mega_man said:
how is the battery life in latest mijuu rom compared to others ?
Click to expand...
Click to collapse
i got around 8hrs of screen on time.. and more than 2 days on normal usuage... i have EB 40
This build is much much quicker than standard CM12
Any updates yet?
TecknoFreak said:
Any updates yet?
Click to expand...
Click to collapse
nope.... nothing yet...
Can someone try PDA tether and see if the USB tether works?
SeeSpike Laboratory - Metallium
ABOUT Spike Laboratory - Metallium
Spike Laboratory - Metallium >>SPLM is an after market firmware based latest "Android Lolli-Pop 5.X.X. This firmware is designed By Spike Laboratory .This firmware suits specially for those people who like,Multitasking performance,optimum speed. In-addition to This the firmware has Inbuilt options and settings to make customization of your Device the way you like.
Features , changelogs and screenshots can be found on Spike Laboratory - WEB
SUPPORT FOR SPLM RELATED ISSUES :
We spend an astonishing amount of time developing this firmware. We can't spend much time on XDA as a result, so if you need support, please try the following:
Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has addressed it already. Especially if you're even close to new at this.
Ask a question in your device forum either in xda . Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
DOWNLOAD LINKS:
SPLM ROM AND RECOMMENDED GAPPS
SPLM ROM for LG G2-d802
(Please do not mirror Download links or Mention Link in any of your posts )
INSTALLATION STEPS:
Minimum Requirements To Install SPLM:
Your Device Should be Rooted with Unlocked Boot-loader & Latest Custom recovery Installed.
You must be on the LP bootstack here
Recommended Custom Recovery TWRP : Click Here to View TWRP Offical supported devices
Installation Procedure:
(A)If you are making a Fresh Installation(or Coming from any other rom other than SPLM) :
Boot Into Recovery Mode
Wipe Data,System,Cache,Dalvik
Flash provide latest SPLM ROM Zip
Again Wipe Cache and Dalvik
Reboot To System
Now again Reboot into Recovery Mode
Flash latest G-Apps
Wipe Cache and Dalvik....and Reboot To System.
(B)If you are already Running SPLM Rom But You want to Update with latest Version:
Boot Into Recovery Mode
Flash provided Updates of SPLM ROM(latest weekly)
Again Wipe Cache and Dalvik
Reboot To System.
SOURCE:
SPLM ROM complete source
Kernel sources
OFFICIAL LINKS & INFORMATIONS :
Official Web-Page
WHO IS TEAM SPIKE LABORATORY?:
TEAM SPIKE LABORATORY
Every donation you send to us goes right back into the rom. It's used for hardware, server costs, etc - all the things that help us make SPLM better with every release. Your support means the world to us! If you've enjoyed SPLM Rom, please consider contributing or donating so we can achieve our goal.Please Don't hesitate to hit the THANKS button.Thank you, and we hope you continue to enjoy SPLM Roms!
http://forum.xda-developers.com/donatetome.php?u=4758315
XDA:DevDB Information
Metallium OS, ROM for the LG G2
Contributors
Schneiderle, Mardon
Source Code: https://github.com/Metallium-ROM
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2015-09-09
Created 2015-08-18
Last Updated 2015-09-10
Reserved
Reserved
Screenshots and links?
serhangelgor said:
Screenshots and links?
Click to expand...
Click to collapse
See post 1.
I tried it!
Rock solid, surprised.
Only one thing, Settings/Buttons was completely empty/white.
If you could add volume steps it would be great!
Screenshots are kinda pointless, all these 5.1.1 ROM loook the same.
Is this 5.1.1 r10?
FYI, OpenGApps Pico package (44MB) flashed fine.
I installed this ROM, this rom is smooth like others.
you need lp bootstack before installing this rom (I was on stock RR before this, so only wiped and directly flashed this rom)
DT2W is not working for me, it is ON in the setting but still its not working
I also tried "echo 1 >/sys/devices/virtual/input/lge_touch/firmware" but no luck.
other than this no other problems for now
Thanks dev for this ROM :good:
Edit 1: This rom is close to stock (nexus like) rom, you will not find any extra settings like blispop or rr
I am not quite getting it...
Is this ROM a genuinely new ROM or an boosted version of CM12.1?
Sent from my LG-D802 using XDA Forums Pro.
sameerm02 said:
I installed this ROM, this rom is smooth like others.
you need lp bootstack before installing this rom (I was on stock RR before this, so only wiped and directly flashed this rom)
DT2W is not working for me, it is ON in the setting but still its not working
I also tried "echo 1 >/sys/devices/virtual/input/lge_touch/firmware" but no luck.
other than this no other problems for now
Thanks dev for this ROM :good:
Click to expand...
Click to collapse
Strange, worked fine for me.
I turned it on with Kernel Adiutor, try that?
Set on enabled, set "On boot" and leave it. Even if you see it showing disabled next time you check Kernel Adiutor, don't change anything since it's activated.
The rom is fast and smooth.
However,its base is old.
It is based on LVY48C,while other AOSP roms are based on LVY48G
WORF84 said:
Strange, worked fine for me.
I turned it on with Kernel Adiutor, try that?
Set on enabled, set "On boot" and leave it. Even if you see it showing disabled next time you check Kernel Adiutor, don't change anything since it's activated.
Click to expand...
Click to collapse
yes, kernel aduitor is the solution for d2tw
Hello I am the team leader, i would like to say this a initial build as @Schneiderle is a new dev , and he is still learning as we are , this rom was made before we pushed any customizations.This rom will be completely diffrent and we hope independent as some others are.If you have any suggestions about further improvments features either pm me or make pull requests.
Also i am sorry that the web was down , now you can all access it.
Enjoy and thanks for positive support.
@Buda1996
Is it possible to add RRO support to your ROM?
Sent from my LG-D802 using XDA Free mobile app
LidaFlorida said:
@Buda1996
Is it possible to add RRO support to your ROM?
Sent from my LG-D802 using XDA Free mobile app
Click to expand...
Click to collapse
Stop it. You have a blazing fast RRO rom,and it is SlimSaber.
Now let us have a blazing fast CM Theme Engine rom.
On this metallim os could we have some choice for scheduler(zen fiops) and for the governor(like smartmax and nightmare)?
It's also possible have low level code optimization like O-3 graphite floop strickt aliasing and other?
Anyway this first release is very good
Thank you for the feedback but as i sayd we are planing on making a own UI as by that we will have to adjust theme manager to the actual UI or themeres will have to adjust their themes.
I'd love to see some screens of the ROM. I cant find any of them here or in your web.
Thanks !
tomirodriguez said:
I'd love to see some screens of the ROM. I cant find any of them here or in your web.
Thanks !
Click to expand...
Click to collapse
here, but ui is still wip
GUYS new build is up got download it at http://home.spikelaboratory.com/metallium go to devices section and download your rom zip and enjoy .
Thanks for the support.Here its amazing.
Buda1996 said:
GUYS new build is up got download it at http://home.spikelaboratory.com/metallium go to devices section and download your rom zip and enjoy .
Thanks for the support.Here its amazing.
Click to expand...
Click to collapse
I downloaded and I'll try it today.
I can't find the change log anywhere on the site. Can you please point to it?
DISCLAIMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it.
Click to expand...
Click to collapse
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
I am not from the official Team of LiquidSmooth. So dont expect official support here :good:
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
Enjoy the Smoothness of LiquidSmoothBUGS:
GPS not working will try to fix
Slimpie forcecloses bug in liquidsmooth source code
Installation Instructions:
1. Download ROM
2. Reboot into recovery [ TWRP 2.8.6.0+ highly recommended]
3. Please back up your ROM before you begin!
4. You need a full wipe
5. Flash the ROM
6. Flash 5.1.x Gapps
7. Reboot
8. It will take a while at first boot.
Click to expand...
Click to collapse
DOWNLOAD:
AndroidFileHost
GAPPS:
OPENGAPPS-ALWAYS LATEST
Special thanks to: @rap_turkez @Orion116 @mcgi5sr2 @JustArchi
XDA:DevDB Information
LiquidSmooth Lollipop for i9300, ROM for the Samsung Galaxy S III I9300
Contributors
singhhacker
Source Code: https://github.com/liquidsmooth
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: AOSP, CyanogenMod, SlimRoms
Version Information
Status: Beta
Current Beta Version: 1
Beta Release Date: 2015-10-13
Created 2015-10-13
Last Updated 2015-10-27
Reserved
was looking for a new rom to flash......downloading now
Good Build. thank you @singhhacker
guys new build is up
it will fix many device specific issues and some random reboots that i faced
flash it and report me
Report after flashing
Fast and smooth so far but...no GPS Signal at all? any fix or update? Thank
Thanx...
thechosenone43 said:
Report after flashing
Fast and smooth so far but...no GPS Signal at all? any fix or update? Thank
Click to expand...
Click to collapse
Which build u r using old or new?
Can someone confirm if gps is working on build 1?
Sent from my GT-I9300 using Tapatalk
Latest build from 2015-10-14 with 5.1 gapps. Clean flash of course from another ROM.
Well not so smooth for me I waited like 5-10 mins in the flash screen ( TWRP 2.8.6.1 ) and then gave up. Used the last 1014 build.
EDIT: Going to redownload and give it another try.
Pleasantly surprised that you set selinux to permissive in the new build, now exposed works like a charm. Thanks.
Does GPS work for you in this build? And if yes what did you do to make it work. Thanks
thechosenone43 said:
Does GPS work for you in this build? And if yes what did you do to make it work. Thanks
Click to expand...
Click to collapse
it will be fixed in next build
thanks for reporting
any other bug guys?
For me, enabling HW+ in MX results in no video playback, which seems to affect YouTube as well.
Without enabling it, video plays fine.
New build is up . Flash and report
mobile data and some other bugs fixed
I just installed your ROM + open gapps pico on a clean flash with twrp 2.8.6.1
Everything is working except the MMS with stock app but it works with google messenger.
I tried to install boeffla sound app but your kernel doesn't support it.
Therefore as I saw that selinux was set to enforcing, I decided to install Archikernel to get benefit of boeffla sound. It works.
I did untutu benchmark :
Stock kernel 25300 (default settings)
Archikernel 28900 (default settings + touchwake enabled)
It looks like phone function is working fine without any delay but need time to be sure.
Xposed v75 sdk22 arm installed and working with my modules without any troubles.
I will try GPS tomorrow.
Good job mate. Thanks.
Please Report about GPS working? thanks in advance
So no issues at all in this latest build? (Except that MMS that you noted)
Sent from my GT-I9300 using Tapatalk
I didn't noticed any other issue. Now I'll try the GPS in few minutes and I will report.
Edit: one issue that I forgot to report but I guess it's from slimlp source about the launcher. When I press home button, it switches always between page0 and homepage. Not a big deal anyway.
Also, I forgot a detail which is important for some of us regarding the flash light. The torch is not switching off when the screen turn off. Good point in my opinion.
---------- Post added at 07:02 AM ---------- Previous post was at 06:23 AM ----------
And the sad news is that the gps is not working. Setting selinux to permissive will not do much. It's a "no go" for me at the moment. I need working GPS. I will try next build if problem is solve.
I will try to fix gps in next build
Sent from my GT-I9300 using Tapatalk
I am not responsible for bricked devices, dead sdcards, explosions, nuclear wars, alarm applications getting failed or any kind of damage to your device, please read the first two posts carefully before deciding to flash this rom, any questions which are already answered in the first and second posts will be ignored.
What is this ?
This is my custom LineageOS based rom which I initially made just for personal use, some users requested me to share it, so I did that. This is a minimal rom with only those features that I use and I really don't like to add too much. If you have some requests then sure, post them but don't keep high expectations that it will be added, I am always reading your posts but will add only those features which I like or which seem very necessary. There are no useless optimisations here, these builds are compiled with stock toolchains.
Does it get updates ?
Usually I update this once in a week, sometimes I could update it in 4 days and sometimes in 8 days, there is no fixed update period but since this is my daily driver and I don't like to use outdated stuff, so this rom will be updated whenever necessary. There is no inbuilt updater app, If you use it, you have to download full builds from here only.
Short feature list -
Full oms support, install substratum from play store and use themes
Network meter in statusbar is available with hide arrows option
Options to customize quicksetting tiles rows and columns
Volte icon is available, can be toggled if you don't like it
Wakelock blocker is available in customization menu
Option to turn on/off fingerprint authentication vibration
Option to allow unlock at first boot with fingerprint
Killed some lockscreen animations, makes unlocking faster
Easy toggles for wifi, bluetooth, data are available
Built with inbuilt los root, removed the # icon permanently
Option to add screenrecord button in power menu
Option to disable screenshot shutter sound
Default gallery is old los gallery because I don't like new one
Cpu info overlay is available in development settings
Killed lots of logging and failed to acquire lock spam on touch
Kernel used is radon latest, always with balanced setting
Many new qs tiles like reboot, screenshot, hw keys toggle, sound
Some other info -
This rom is rooted by default, to unroot, just download official los unroot addon and flash it.
You cannot flash official los over it, verification will fail and it will not flash, better go for clean flash.
Both kenzo and kate users should use firmware from official los thread post #2.
Kernel Info -
This rom uses latest stable version of radon with following settings - balanced performance, quick charge off, selinux enforcing, new thermal engine, warm enhanced colors.
You can easily change these settings without rebooting with my Radon kernel control app or you can just re-flash radon kernel to change these settings in installer itself.
Downloads and changelogs -
https://github.com/los-kenzo/downloads/blob/lk-7.1/README.md
Credits and contributors -
@TheStrix, @abhishek987, @billchen1977 for all their work on device.
@MOVZX for suggesting some stuff for this.
NOS and OctOS teams, I used some of their features.
Everyone whose commits you see on github.
XDA:DevDB Information
Customized LineageOS based builds, ROM for the Xiaomi Redmi Note 3
Source Code: https://github.com/los-kenzo
ROM OS Version: 7.1.2 Nougat
ROM Kernel: Linux 3.10.108
Based On: LineageOS
Version Information
Status: Stable
Created 2017-05-27
Last Updated 2017-11-26
Screenshots
Reserved for screenshots
Thank you!
Thank you very much..
I am using it and its really good.
Great work. Love them, was publicizing them since more than a month.
Please Can you add signature spoofing? If you could, your rom would fits perfectly with me.
Reserved for review
Coming
Reserved for review
Does it have button remap like on DU?
exodius48 said:
Does it have button remap like on DU?
Click to expand...
Click to collapse
It has same button customization which los has.
I don't need root can I flash unroot zip from los
dnana_28 said:
I don't need root can I flash unroot zip from los
Click to expand...
Click to collapse
Yes
Umang96 said:
Yes
Click to expand...
Click to collapse
Hello,
Can I unroot and then reroot with Magisk ?
thx
phalae said:
Hello,
Can I unroot and then reroot with Magisk ?
thx
Click to expand...
Click to collapse
He has already answered that in the post above, please take time to read and understand. Yes you can unroot and reroot with Magisk.
Nice one
Sent from my Redmi Note 3 using Tapatalk
Ss about phone Dev !!
Sent from my Redmi Note 3 using XDA Labs
Hi, does this rom have customizes quick settings, buttons,navigation bars and recents app
If this rom doesn't have, do you have any plan to add these features in future. Tks in anvanced
Umang96 said:
It has same button customization which los has.
Click to expand...
Click to collapse
Its very minimal.
Could you pls add button remap like on DU?
jack_hunter97 said:
Hi, does this rom have customizes quick settings, buttons,navigation bars and recents app
If this rom doesn't have, do you have any plan to add these features in future. Tks in anvanced
Click to expand...
Click to collapse
+1
Sent from my Redmi Note 3 using Tapatalk
Can we dirty flash official lineage os updates over your build umang?
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
Introduction:
A friend of mine (Fusionalex) and me were very unsatisfied with the current state of custom ROM development for this - at least concerning the hardware - great device. The maintainer of the official LineageOS has done nothing for months. Fixes for basic issues and features (see our features below) haven't been implemented although the source has been available for years now. For us, switching to one of the numerous bloated Lineage forks (which at least fixed some issues, but brought other unnecessary problems) was no reasonable option. Apart from all the bloat, many of them don't get regular updates anymore, even though major security issues like KRACK or Blueborne have already been fixed in the official Lineage source. There are some great builds out there like CM 13.0 by MrColdbird or 14.1 by OrdenKrieger (from which we took most of the code for the major fixes, a big thank you goes out to you).
So which ROM did we choose? An up-to-date official LineageOS, but extremely bugged? Or a fixed, but incredibly bloated and mostly unstable custom ROM without the latest security patches? We chose to create our own Lineage experience, as close to the official as possible, but with most of the big issues fixed and up to date.
We will continue to update this ROM until LineageOS 15 by OrdenKrieger is stable enough to use as daily drivers.
Click to expand...
Click to collapse
Features:
U-Touch
Headset buttons and headset hook working, especially with Xiaomi headsets
Ambient Display
GLONASS
OTA updates
some customizations to update the user interface, because apparently Google refuses to push its new design in the AOSP source
We are investigating/working on the some more things, just follow our changelog below!
Click to expand...
Click to collapse
Screenshots:
The UI is close to official LineageOS, you can take a look at the changes in the screenshots section.
Click to expand...
Click to collapse
Installation instructions:
Files you need:
TWRP 3.0.0 by eagleeyetom
TWRP 3.2.1.-0 by ShubhamB
ZUI 2.5.358ST firmware
latest version of our ROM (always on top of the linked list)
(optional) OpenGApps ARM 7.1 (recommended version is Aroma)
You can switch from official LineageOS to our ROM by flashing this small zip, which removes the signature check and then our ROM. Do not flash GApps again, this is only possible on a freshly installed ROM! If you want to go back to official, you need to flash this file.
Steps to install:
unlock bootloader
flash TWRP 3.0.0 using fastboot (v3.0.0 is currently the only version with Aroma support, which we need later on)
if you get this error message, you can ignore it: E: unknown command [log] - this happens because the old TWRP version you need to use doesn't support certain logging commands used in updater scripts, this does not affect the integrity of your installation
flash ZUI 2.5.358ST (this flashes the latest available official firmware)
wipe system, cache, data and Dalvik cache
flash our ROM
(optional) flash OpenGApps, you can use Aroma installer (the interface is bugged, but usable and the phone doesn't crash thanks to the TWRP we are using)
flash updated TWRP 3.2.1-0 (has more features and is more up-to-date, Aroma isn't supported, but you don't need that anymore now)
Click to expand...
Click to collapse
Changelog:
see first post below
Click to expand...
Click to collapse
Downloads:
Download the latest version of our ROM here (always on top of the linked list).
Click to expand...
Click to collapse
Sources:
https://github.com/DaBozzz
Click to expand...
Click to collapse
Bug reports:
Please do not report non-functional fingerprint sensors. You need to flash the ZUI firmware before, as it includes the updated fingerprint sensor drivers. Take a look at the instructions above please.
Feel free to report any other bugs!
Click to expand...
Click to collapse
Thanks to:
LineageOS team, for maintaining our beloved OS
ashwin007, for maintaining our device (in the past?)
OrdenKrieger, for being the reason why this device is still alive
MrColdbird, for investigating all the big issues
Click to expand...
Click to collapse
If you want to support the most important developer for the Z 1, consider donating to OrdenKrieger, his PayPal donation mail address is [email protected].
XDA:DevDB Information
Unofficial LineageOS 14.1, ROM for the Lenovo Zuk Z1
Contributors
Da Bozz, Fusionalex
Source Code: https://github.com/DaBozzz
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: ZUI 2.5.358ST firmware
Based On: LineageOS
Version Information
Status: Beta
Current Beta Version: 20171126
Beta Release Date: 2017-11-26
Created 2017-11-22
Last Updated 2017-12-23
Announcements
Changelog:
All builds contain the latest LineageOS changes.
Code:
20171126: some UI changes, Ambient display
[LIST]
[*][changed] settings icon updated, to apply this change you have to delete the icon database of your launcher: navigate to [I]/data/data/[Launcher Bundle-ID/Package Name]/databases/[/I], delete [I]app_icons.db[/I] and restart your launcher
[*][changed] updater accent color updated to match recent changes
[*][new] Ambient Display
[*][new] Toast message icons
[/LIST]
20171123: some UI changes
[LIST]
[*][changed] blue accent color
[*][changed] documents icon updated, to apply this change you have to delete the icon database of your launcher: navigate to [I]/data/data/[Launcher Bundle-ID/Package Name]/databases/[/I] and delete [I]app_icons.db[/I] and restart your launcher
[/LIST]
20171122: initial release
[LIST]
[*][new] U-Touch
[*][fixed] headset buttons and headset hook working, especially with Xiaomi headsets
[*][new] GLONASS enabled
[*][changed] custom OTA updates
[*][changed] rounded icons
[*][new] apn: added support for spusu MVNO (Austria)
[/LIST]
Click to expand...
Click to collapse
Nice work guys.. keep it up.. hope to see a bug free ROM from you..
Little advice :
Try to make radio images inline with device tree so that users don't need to flash a big chunk os before flashing this zip just only for latest radio images ...
shubhambhise said:
Nice work guys.. keep it up.. hope to see a bug free ROM from you..
Little advice :
Try to make radio images inline with device tree so that users don't need to flash a big chunk os before flashing this zip just only for latest radio images ...
Click to expand...
Click to collapse
Yeah, you're right. I created a flashable ZIP containing only the firmware, now about 33 MBs in size.
Feels like device rose like a Phoenix from the ashes of hell... Thank you for the rom
Amazing , thanks
Sent from my Pixel XL using XDA Labs
Please bring Camera2 API
Hello @Da Bozz Sir, I highly appreciate your great work and I only have two requests.... Please please implement the Camera2 API in your future build...
I know that one has to make changes to the device tree but I don't know how to do it...
(...in the QCamera2 folder by adding HAL3, etc...)????
But please, please implement it, the chipset SD801 does supports it?
And please add Ambient Display Feature...
Please reply sir...
Vaibhav Puri said:
Hello @Da Bozz Sir, I highly appreciate your great work and I only have two requests.... Please please implement the Camera2 API in your future build...
I know that one has to make changes to the device tree but I don't know how to do it...
(...in the QCamera2 folder by adding HAL3, etc...)
But please, please implement it, the chipset SD801 does supports it
And please add Ambient Display Feature...
Please reply sir...
Click to expand...
Click to collapse
Its impossible mate... Try and understand... In your listing of msm8974 devices, does any device has HAL3 enabled ?
AFAIK the answer is no... Our chipset is too old to implement it
Vaibhav Puri said:
Hello @Da Bozz Sir, I highly appreciate your great work and I only have two requests.... Please please implement the Camera2 API in your future build...
I know that one has to make changes to the device tree but I don't know how to do it...
(...in the QCamera2 folder by adding HAL3, etc...)
But please, please implement it, the chipset SD801 does supports it
And please add Ambient Display Feature...
Please reply sir...
Click to expand...
Click to collapse
Hello,
we are still investigating the possibilities of using the Camera2 API on this phone, but please note that it's highly unlikely that we get things to work flawlessly.
Ambient Display shouldn't be a big problem.
We just have to investigate if it causes any problems.
Great work from you guys, looking forward to future builds!
Can you upload screenshots..??
himanshu fulmali said:
Can you upload screenshots..??
Click to expand...
Click to collapse
Why? It's just LineageOS but with rounded icons like you've seen them on pixel devices.
himanshu fulmali said:
Can you upload screenshots..??
Click to expand...
Click to collapse
As soon as the UI updates are included in the build we will upload screenshots, but it's really just the same like on LineageOS.
Fusionalex said:
Hello,
we are still investigating the possibilities of using the Camera2 API on this phone, but please note that it's highly unlikely that we get things to work flawlessly.
Ambient Display shouldn't be a big problem.
We just have to investigate if it causes any problems.
Click to expand...
Click to collapse
U can take help from @shubhambhise , in his AEX, ambient display works super fine.
Sharma_Ji said:
U can take help from @shubhambhise , in his AEX, ambient display works super fine.
Click to expand...
Click to collapse
Thanks, we will take a look at it! Some devs talked about a possible negative performance impact, which is why the feature hasn't been included yet.
Great job.
Can i use Magisk and Substartum.
Fusionalex said:
Hello,
we are still investigating the possibilities of using the Camera2 API on this phone, but please note that it's highly unlikely that we get things to work flawlessly.
Ambient Display shouldn't be a big problem.
We just have to investigate if it causes any problems.
Click to expand...
Click to collapse
Thanks for your reply sir,
And I'm very happy to have great developers like you, who proved to be the best, I've just downloaded the 24th November build, and it's great that finally lineage os has ambient display enabled....
All the credit goes to you (@Fusionalex), @Da Bozz & @OrdenKrieger...
Sir, I would still have the request to test Camera2 API on this phone
You people are our last hope, because editing the Device Tree is beyond my reach, as it requires great dedication, knowledge and ambition, that I don't possess...
Sir, besides Cam2, I have one last request for you, please add three finger screenshot gesture and toast icons to your upcoming builds...
Please sir...
Waiting for your reply...
hardikkchavda said:
Can i use Magisk and Substartum.
Click to expand...
Click to collapse
Hello! Yes, you can use Magisk of course!
I don't know about Substratum sorry, it isn't included in the rom.
---------- Post added at 06:16 PM ---------- Previous post was at 06:15 PM ----------
Vaibhav Puri said:
Thanks for your reply sir,
And I'm very happy to have great developers like you, who proved to be the best, I've just downloaded the 24th November build, and it's great that finally lineage os has ambient display enabled....
All the credit goes to you (@Fusionalex), @Da Bozz & @OrdenKrieger...
Sir, I would still have the request to test Camera2 API on this phone
You people are our last hope, because editing the Device Tree is beyond my reach, as it requires great dedication, knowledge and ambition, that I don't possess...
Sir, besides Cam2, I have one last request for you, please add three finger screenshot gesture and toast icons to your upcoming builds...
Please sir...
Waiting for your reply...
Click to expand...
Click to collapse
Thanks! I'm glad you like our work!
The ambient display build from 24th has been taken down for now, because the implementation is incomplete, it's missing some settings which we will add later today.
Camera2 API is still work in progress sorry!
About the other 2 things: please describe more precisely what you want and we will consider it
Thanks for your valuable reply sir,
I was requesting for a popular gesture nowadays called the 3 Finger Swipe Screenshot
In this one, a user has to swipe from the top to the bottom dragging 3 fingers on the screen, this works as a gesture and takes a screenshot, it is very popular in Xiaomi devices (MIUI) and on OnePlus devices....
And now, many custom ROMs like Resurrection Remix, PureNexus, etc. have this feature
Attached picture 1 & 2 show a demo...
-----------------------------------------------------------------------
Second of all is the app icon that will appear on the toast message...
CM12.1 & CM13 stable versions have this feature which works flawlessly, attached picture 3 & 4 demonstrate how...
But in the nougat ROMs, users are provided with a switch to either enable it or to disable it...
But this "switch" has proved to be buggy in every nougat ROM that I have used (picture 5)
To implement this, one has to add this code to Toast.java file in the framework:
(android_frameworks_base/core/java/android/widget/Toast.java)
Code:
ImageView appIcon = (ImageView) mView.findViewById(android.R.id.icon);
if (appIcon != null) {
ActivityManager am =
(ActivityManager) context.getSystemService(Context.ACTIVITY_SERVICE);
if (!am.isPackageInForeground(packageName)) {
PackageManager pm = context.getPackageManager();
Drawable icon = null;
try {
icon = pm.getApplicationIcon(packageName);
} catch (PackageManager.NameNotFoundException e) {
// nothing to do
}
appIcon.setImageDrawable(icon);
}
}
I ported out this code from RR OS source code, but please consider investigating as I'm not sure if this will work on lineage os...
Link- https://github.com/ResurrectionRemi...ob/nougat/core/java/android/widget/Toast.java
Link to Lineage 14.1 toast.java :
https://github.com/LineageOS/androi...b/cm-14.1/core/java/android/widget/Toast.java
Link to CM13 toast.java :
https://github.com/CyanogenMod/andr...3.0-ZNH5Y/core/java/android/widget/Toast.java
Please have a look at this, whenever you get time.....
I will patiently wait...