Related
Introduction:
Hello for everybody, I'm here again . Sorry for the late . Very Merry Christmas and a Wonderful New Year to all you. Ok, I work hard on this custom rom for 2 months. I'm very happy to see a lot of features and improvements, the rom is based on Italy Firmware. Now lets start !
Warning:
Code:
- I'm not responsible for error or software brick caused on your device.
- Your warranty is void if you used the ROM.
Features:
Latest firmware
Rooted with latest Supersu Binary
Deodexed
Init.d support
Removed a lot of apps (makes boot time and improves performance)
Latest version of Busybox.
Zipaligned
Fast and Light Launcher (based on Touchwiz T210 modifed by me)
Scary scores on benchmarks
Ram managment
Battery saver tweaks
Better Scroll
Lot of improvement and upgrade of the performance on GPU
Touch render GPU
80% improvements less laggy, gagging and more performance on the whole User Interface
Dalvik runtime time reduce to open apps and games
Excellent performance on games (gta sa now can be played on max with effects max without problems)
CPU control based on scripts
Batter save memory ram (more free for your use)
Reduce boot and power off times
4-way Reboot Menu
Multi-Windows
Lot of more I may have forgot.
Note: art runtime don't work, I addict only to give small boost to remount runtime (use only if the rom take any lag,impossible hahahahahaha kidding ) .
Bugs:
None so far
Tell me if you find one
Download:
The ROM can be downloaded on this link: Sweet Dreams v1 (811MB)
Version V2 (Pre release)
https://www.androidfilehost.com/?fid=95916177934527839
Sweet Dreams V3.1
https://www.facebook.com/groups/529435540489595/
Installation:
1) Download and Save the file on any folder, it's better to save on your sd card
2) Go to your custom recovery
3) Wipe data/cache
4) Wipe system
5) Now go to your folder where you save sweet dreams v1.zip
6) Install. Wait around 10 minutes may take long time to install. When done, reboot and enjoy your sweet dreams
Changelog V3.1 Release:
Better ram free
Fix hotspot wifi
Fix issue with conflict with some script (cause issue performance)
new kernel build (I don't modify just samsung gives update), when tab 3 charge again,is more fast.
Fix some function busybox 1.20 (please don't change the version,this version is the best and don't cause any low performance,is very stable, thanks for understand)
More free GPU usage (increase performance in some games, I test gta san andreas and oddworld stranger wrath both on maximum quality and effect, I get nice fps )
Systemui and touchwiz now is more stable and fast
Rom is clean if you find some app may it don't necessary for tab 3 please tell me I will accept your suggestion*
This rom is more clean than version V1.
Add some script increase performance GC vivante 1000, (now tab 3 have nice power for high level graphics games, have funny XD)
odex rom again (temporaly 4 way reboot removed from version V2, because I need descompile policy and service to put lines with 4 way reboot,and some people know, my latop don't back for me at moment, it will back next month , if some people know add 4 way reboot with odex files, your help is very welcome for me)
I will put more language on this rom, I need remove others. Because for some test.
Sd card boost (40% more performance on I/O games )
Better stream
3g booster (10% better than last version)
New firmware,based on Indian
Battery economy optimized without reduce performance
fix time execution on archidroid (execution is better now).
This rom is pre-release V2, tell me if you find some problem or great results than version V1.
Sweet Dreams V3
Change Logs:
Deodexed Again
4 away menu add
New Latest Firmware
Fix problems with signal and call
More Clean Than ever
More Fast and Powerful
Stable Release version
Add Security Parts Kernel
Update libraries from Kernel
Better Ram manager
No Bugs, Fast than light
Sweet Dreams V3.1
Fix the problem charging offline
Add few more improvements
A little change in system files
No bugs
(the download you will find on my group from facebook, send request to participate on group, I will add you .
Spoiler Next Update for Sweet Dreams V3.2
Kernel with optimization and very strong to run many games, I begin to work on this and I get good results, but I need more time to make it more stable and better
(please note, google play and google play services will update when you put your account, if you want to install into ''system'' use link2sd to integrate than , another app if want to remove is ''samsungaccount'' the only app I can't find on pc, but it inside on ROM, use link2sd too to remove it. The is very clean, I remove a lot of Bloatware and apps)
Credits and Thanks:
Big thanks to @Nonta72, he helped me a lot . :highfive:
Thanks for @gr8nole build cwm and trwp for our tablet. :angel:
Thanks for Andy to test e send me results
If I help you give a thanks :good:
hehk1234 said:
.....
Click to expand...
Click to collapse
Good job :good:
Keep it up
Nice to see new rom for our tab!!!
Sent from my GT-N7000 using XDA Premium 4 mobile app
Silently you kept working all of this while...Well done yet to DL..just woke up
Thanks. I appreciate his praise and patience for my delay
Will it work for t210R?
sent from my SM-T210R using xda PREMIUM
rookie12 said:
Will it work for t210R?
sent from my SM-T210R using xda PREMIUM
Click to expand...
Click to collapse
No. Only for T211
hehk1234 said:
No. Only for T211
Click to expand...
Click to collapse
Ok ?
sent from my SM-T210R using xda PREMIUM
@hehk1234
i am just thinking what does it include(new)?
its size is 800mb+! why is it so big?
i have not downloaded it yet and might not be able to download it for a few days, so cant test to find it out myself,
will download it next year
sscsps said:
@hehk1234
i am just thinking what does it include(new)?
its size is 800mb+! why is it so big?
i have not downloaded it yet and might not be able to download it for a few days, so cant test to find it out myself,
will download it next year
Click to expand...
Click to collapse
Read features hehehe. 811mb big rom.... I'm accord with you, but don't worry I promisse for you this rom is very fast. I don't talk what the rom have (spoiler never e.e kkk kidding). Just test my friend and post results :fingers-crossed:
Hey folks look at my question on post. Look up and answer. I will build version V2 sweet dreams, and I need your opinions
Nice! This is a great ROM.
Hopefully we see more of sweet dreams.I dont like the sweet dreams boot screen.Could you change that in next version?
MKguy said:
Nice! This is a great ROM.
Hopefully we see more of sweet dreams.I dont like the sweet dreams boot screen.Could you change that in next version?
Click to expand...
Click to collapse
This is default bootanimation.zip. But if you don't Like you can change in your self, go to system-media-(here you will find bootanimation.zip) change with bootanimation you like and set correct permission (RW-R-R)
hy thanks for nice room..but it's have small bug at Mobile Hotspot
when i try to turn on always off again and than my tab trying to turn on again and off again
always like that,,hope you can solve this issue at new version cheerss
I think its best this rom is debloated and moved to pure android because the ram usage is ridiculous and there is just too much of a mess with that bloat crap.
You mention alot of features but I can't find the ram manager thing you mention.Is this rom already busyboxed and init.d script tweaked or Am I missing something?
Is it possible to change the status bar icons to that of lollipop.?
at least, this rom could be a solace for waiting CM11 released
I should try it tonight...
MKguy said:
I think its best this rom is debloated and moved to pure android because the ram usage is ridiculous and there is just too much of a mess with that bloat crap.
You mention alot of features but I can't find the ram manager thing you mention.Is this rom already busyboxed and init.d script tweaked or Am I missing something?
Click to expand...
Click to collapse
You missing. I don't based ram manager on init.d or build.prop, just script based team kernalize.
ethical ricado said:
Is it possible to change the status bar icons to that of lollipop.?
Click to expand...
Click to collapse
Yes, I pre patched system framework to use xposed. You can try use gravitybox. Good luck :good:
bangdes said:
at least, this rom could be a solace for waiting CM11 released
I should try it tonight...
Click to expand...
Click to collapse
You begin your build cm11 or wait for me build cm11 ? Because if I start build cm 11 for tab 3 I will take a big time because I don't have my computer at moment . But if you build cm11 I will wait bro :highfive:
I AM NOT TO BE HELD RESPONSIBLE IF U DAMAGE UR PHONE / SPILL UR COFFEE / MISS UR ALARMS / ANY OTHER CALAMITY/MISHAP
DO NOT CROSS FLASH! THIS IS MENT ONLY FOR Xperia Z5.
ITS HIGHLY RECOMMENDED TO TAKE A TA BACKUP BEFORE BOOTLOADER UNLOCK!
Click to expand...
Click to collapse
Features list:
Kernel is patched by tobias.waldvogel repack tool, include dm-verity/Sony RIC off, drmfix & busybox
CPUQuiet Hotplug: rqbalance (default), runnable
CPU Governor: interactive (*), ondemand, performance (default)
IO Scheduler: noop, deadline, row, cfq, vr, zen, fiops, tripndroid (default)
TCP Congestion: westwood (default), reno, cubic
(*)will be set after boot, depends on init.qcom.post_boot.sh, stock default is interactive
Build with GCC 4.9.4 toolchain
Stability, power and performance enhancement
Unified kernel, one image for both models
CPUQuiet Framework, base for RQBalance hotplug governor, tune for more efficient on kitakami
interactive governor enhancement (backport from 3.18 kernel)
Power efficient from NVIDIA
Cyan LED on fully charged
LED blinking
Extra IO schedulers
Overcharged current from 1500mA to 1800mA
frandom - 10 to 50 faster than u/random
Lower backlight at boot, save inefficient power a bit
Disable add_random for better performance on solid state drive
Enable High Performance Mode for WCD9330
Improve suspend and idle state
Download link:
Stock:
Mediafire | Androidfilehost
LineageOS:
Mediafire | Androidfilehost
How to install
Fastboot method:
Download zip file, extract and put img file together fastboot binary, open cmd and type
Code:
fastboot flash boot boot.img
Recovery method:
Put the zip file in your device's storage, reboot to recovery and flash.
TWRP thread: https://forum.xda-developers.com/crossdevice-dev/sony/twrp-3-1-0-z5-z5c-z5p-t3571050
Firmware version:
32.3.A.2.33 - latest stock kernel
Source: https://github.com/RyTekk/sony_kernel_kitakami_8994
Credits:
@RyTekk - a fantastic guy who made this kernel :laugh:
@zacharias.maladroit - for helping me a lot, really much, countless
@Tommy-Geenexus - same as Zach and commits for kernel improvement
@tobias.waldvogel - for amazing ramdisk repack tool
@flar2 for enhancement commits
@BlackSoulxxx for charging hack
@Myself5
@LineageKitakamiTeam
@codeaurora
@Linaro
@NVIDIA
@Sony
Let me know if I miss you
Click to expand...
Click to collapse
Hey is this for stock or cyanogenmod?
HaoZeke said:
Hey is this for stock or cyanogenmod?
Click to expand...
Click to collapse
Stock 32.2.A.0.253, sorry for forgetting that.
Seems pretty nice , no lags , maybe slightly smoother ?
Battery -1% during night ( 7hours)
I had a small problem with seeder app (entropy generator) keeps asking for Root and never can turn it on, I'd same problem with stock .253 kernel but Androplus V36 don't have this problem , using latest supersu 2.76
korom42 said:
Seems pretty nice , no lags , maybe slightly smoother ?
Battery -1% during night ( 7hours)
I had a small problem with seeder app (entropy generator) keeps asking for Root and never can turn it on, I'd same problem with stock .253 kernel but Androplus V36 don't have this problem , using latest supersu 2.76
Click to expand...
Click to collapse
I don't recommend you to use Seeder or apps/tweaks like this (e.g CrossBreeder), your entropy will be forced to keep a highest value as possible, yah maybe there's a little smoother in UI but some tasks may be done slower (I got worse time loading of Asphalt 8 due to this). Btw, frandom is good enough to you don't need those high entropy value
Does it work on MWA and X ROM?
RyTekk said:
NOTE 3: This kernel has been hard testing on E6683, it should work on other DSDS variant (E6633), single devices got sd card not detected and it's out of reach for me atm
Click to expand...
Click to collapse
As for SDCard detection: It depends on the appended DTB used. Appended DTB is specified in the defconfig. Basically the dtb itself is the only difference between Z5 DSDS and Z5 ROW. Appending both to the same kernel _should_ work in theory (This approach was tested on the AOSP 1.2.2 Kernel), however this doesnt work on the Z5 Devices, as both DSDS and ROW share the same msm-id in the defconfig, that way the Bootloader itself can't determine which is the correct dtb, and uses the one which is appended first. This means you need seperate Kernel images for ROW and DSDS.
Took me a while to figure out for OM5Z, though I'd share it so you can save up that research time
Can any developers make an AndroPlus V36 for E6683/33 (with full SD CARD support)?
Is recovery include in kernal
Myself5 said:
As for SDCard detection: It depends on the appended DTB used. Appended DTB is specified in the defconfig. Basically the dtb itself is the only difference between Z5 DSDS and Z5 ROW. Appending both to the same kernel _should_ work in theory (This approach was tested on the AOSP 1.2.2 Kernel), however this doesnt work on the Z5 Devices, as both DSDS and ROW share the same msm-id in the defconfig, that way the Bootloader itself can't determine which is the correct dtb, and uses the one which is appended first. This means you need seperate Kernel images for ROW and DSDS.
Took me a while to figure out for OM5Z, though I'd share it so you can save up that research time
Click to expand...
Click to collapse
I tried to build a kernel with diffconfig sumire but the sd card wasn't recognized, so I decided to not support devices that I don't own for now if there's no one who's interested in it. I will ask you later
rajdeep312 said:
Is recovery include in kernal
Click to expand...
Click to collapse
It does, with TWRP from tobias's tool.
ROM_For_Z5 said:
Does it work on MWA and X ROM?
Click to expand...
Click to collapse
As long as it's stock based.
Plz make patch for reducing heat or downclock big cores
rajdeep312 said:
Plz make patch for reducing heat or downclock big cores
Click to expand...
Click to collapse
Use kernel manager apps (e.g Kernel Adiutor) instead to adjust it, I kept it due to boosting the bootup time.
ROM_For_Z5 said:
Does it work on MWA and X ROM?
Click to expand...
Click to collapse
Yes
Sent from MWA Pro-Spect V1.0.0 On My Z5
@RyTekk
Xposed is not working for me , I tried diffrent version from v85 to v86.2 all didn't work
korom42 said:
@RyTekk
Xposed is not working for me , I tried diffrent version from v85 to v86.2 all didn't work
Click to expand...
Click to collapse
I have no idea, I don't use Xposed, could you take a try to use xposed systemless by tobias's repack tool?
Can you make a build for Z3+ ? by using zach kernel ideas.
Thanks
The kernel seems not working on custom ROM, like X ROM and MWA. Everytime I flash your kernel, it can boot normally but the SystemUi always get force closed. However, it seems work quite good on my friend's Z5 E6633 running stock firmware.
Thanks for your work.
Hello, thanks for the contribution. Have you got any plan for adding z5c support?
sirdoha said:
The kernel seems not working on custom ROM, like X ROM and MWA. Everytime I flash your kernel, it can boot normally but the SystemUi always get force closed. However, it seems work quite good on my friend's Z5 E6633 running stock firmware.
Thanks for your work.
Click to expand...
Click to collapse
I have tested on purely stock so I can't adapt for other custom ROMs, it's not my failure :laugh:
ninestarkoko said:
Hello, thanks for the contribution. Have you got any plan for adding z5c support?
Click to expand...
Click to collapse
I mainly focus to make the kernel to be stable before bring it to other devices, and I have to finish my assignments first.
New version - V2 is up
changelog said:
Add darkness governor
Fix kernel panic on boot when another governor which is different from interactive is set
A lot of memory enhancement and leakage fixes
Battery usage optimization
Bug fixes, security and performance enhancement
ASoC: gapless mode actived and fixed, more enhancement
Click to expand...
Click to collapse
Download:
Androidfilehost | Mediafire
Thunderoar Kernel For SM-T113
(Tab 3 Lite 7.0 Wifi)
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards, corrupted partition, nuclear disasters
* Please do some research before using this mod!
* YOU are choosing to make these modifications,
* If you point the finger at me for messing up your device, I will laugh at you.
Features:
Overclocked
Deferred Timer for KSM
USB Fast Charge
Arch Power
Frandom
Powersuspend for battery life/saving
QuickWakeup for battery life/saving
Dynamic Sync Control
Fsync control on/off
Voltage Tweak
NVS hibernate driver
Multicore Power Saving
Schedule workqueues on awake CPUs to save power
CPU Boost
Adaptive Low Memory Killer
Software CRC control toggle
Gentle Fair Sleepers toggle
and so on...
CPU Hotplug:
AutoSMP
Added CPU governors:
Sprdemand
Conservative
Ondemand
Userspace
Powersave
Interactive
Performance
and so on...
Planned Update
-nothing i guess (but u can suggest somethin to me that possible)
Bugs(s)
-No MORE BUG!
Custom kernel Installation:
Download the kernel from here
Choose the tar.md5 if flashing from odin
Choose the zip files if flashing from custom recovery
Choose the latest version
Odin Instruction:
Open any version of odin
Choose your tar.md5 file from AP Tab
And Start
Custom Recovery Instruction:
Reboot into recovery if usin zip files (recommended to make a nandroid)
Flash the kernel zip
Reboot and enjoy!
Stock kernel Installation:
Download the stock kernel from here
Enter recovery mode, choose install, choose install image,
and then go to the directory of your downloaded stock kernel
choose it and then check mark on the boot circle.
And then flash it
Notes:
20/12/2107
Kernel Update!!
Thunderoar-Kernel 5.0 Codenamed "Angel Beats!"
Fix all issues regarding MTP not working
and random reboot, is this a comeback? xD, i don't know xD
It appears that my kernel uses a lot more memory than i expected,
Possibily some problem with memory patch in the kernel source
The workaround for this problem is you have to increase your disksize
In the kernel adiutor, if it stays at 300mb, it will not enough and cause a problem
Which is stuck or complete crash of device. Recommended size is 500mb or more if
you encountered it again and set swappiness into 60
XDAevDB Information
Thunderoar Kernel, Kernel for the Samsung Galaxy Tab 3 7.0
Contributors
@Thunderoar
Credits:
@Osm0sis-For the Anykernel2
@stathis95194-For the stock kernel
Github:
Kernel source
Version Information
Status: Stable
Current Stable Version: Angel Beats! || 5.0
Stable Release Date: 2017-12-24
Created 2016-12-26
Last Updated 2017-12-24
Press the "Thanks" button if you appreciate my work or if i helped you
Changelog:
V5.0 Codenamed "Angel Beats!" (2017-12-24)
+Kernel upstream version 3.10.17->3.10.108
+Gpu update
+Fix MTP
+CPU Frequency change 200MHz upto 1.5GHz
+Entropy Update
+Multicore Power Saving
+CPU Boost
+Arch Power
+Power Suspend
+Quickwakeup
+Read-ahead set to 512kB
+Adaptive Low Memory Killer
+Software CRC control
+Gentle Fair Sleepers
+Fsync On/Off
+Built from scratch and fixed random reboot
+Dynamic Fsync
-Removed Obselete Cpu Governor
-Removed Obselete I/O Scheduler
-Removed UKSM and use normal KSM
V4.1.1 update (2017-7-5)
+Fix some devices not booting
+New CPU Hotplug: AutoSMP
V4.1 update (2017-7-3)
+Just another update for stability
V4.0 update (2017-7-3)
+No more Reboot or similar effect - Tested
+Linux kernel downgraded into 3.10.32 temporarily because rebuilt from scratch
+Auto cpu boost on input without predefined frequency
+UKSM(Ultra Kernel Samepage Merging)
+LZ4 Z-RAM - Faster Memory
+Asynchronous Fsync -Faster storage management
+USB Fast Charge are back
-Removed cpu governor: OndemandX, Zzmoove, Scary *Temporary*
V3.4 update (2017-6-22)
+The most stable kernel that i've ever built
+Linux Kernel 3.10.44
+No more frequent reboot or similar effect
+Bug fixes
V3.3 update (2017-6-17)
+Linux Kernel 3.10.40
+Properly fix the bug that mentioned on the v3.2 update and lower the risk of instability
+A bunch of cpu governor
*Hotplug
*Lionheart
*Reworked version of intelliactive
*Ondemandplus
*OndemandX
*Hyper
*Zzmoove
*Nightmare
*Wheatley
*Badass
*Scary
*All of them are properly functioning and tuned for compatibility
and if you want the hotplug features, use the hotplug governor provided
+Bug Fixes
-Adaptive cpu governor removed parmanently
V3.2 update (2017-6-8)
+Update: Linux Kernel 3.10.37
+Update: Using the latest Anykernel2 zip
+Update: Minimum frequency change into 254MHz and also voltage change for nice battery lasting
+Update: cpu-boost set to 765MHz and running for 3 seconds when touch detected
+Update: Set CFQ as default scheduler
+Fix: Bug that cause long running app either in the background or foreground to freeze/lagging/reboot etc.
+Fix: Bug that cause the device to reboot randomly
+Fix: Bug that cause the graphic being not working/properly lagging or some sort
+Fix: Bug that cause the device to reboot or freeze when standby
+Fix: Bug that causing the kernel to working improperly/lagging/rebooting/unstable after a while
+Bug fixes
V3.1 update (2017-5-7)
+CPU Frequency minimum change -> 384MHz
+Fix Frequency bug stuck at 768MHz
+Faster charging
V3.0 update (2017-5-7)
+Kernel version updated from 3.10.22 - > 3.10.26
+Using updated Anykernel zip
+Frequency: changed into 1600Mhz and minimum is 386Mhz
+GPU: function updated
+Deferred Timer working as it is
+LZ4 compression
+"Schedule workqueues on awake CPUs to save power" are back
+Remove conflict between Samsung touch booster and my CPU-Boost so you can actually set the amount you want
for boost
+Sync threshold for cpu-boost are not set
+I/O scheduler default to deadline
+Fsync are on by default
+TCP Congestion Algorithm set default to Westwood which is the fastest for network usage
+Additional TCP Congestion Algorithm are added
+Additional tweak to make the kernel faster
+Camera Fix!!!
+MTP Function (unconfirmed)
+A whole lot of bug fixes
-sprdemand governor
-Fastcharge (for now)
V2.8 update (2017-1-31)
+Frequency: changed into 1660Mhz and minimum is 580Mhz
+Cpu-boost: defined stable values
+Less OS tearing
+Fastcharge updated
+Audio functionality improved
+Voltage: change for low-power use
+Many bug fixes
+Selinux: updated
-Automatic Cpu Hotplug: removed for better stability but with little to no battery drainage but you still can deactivate the cores through Kernel Adiutor
-Sprdemand: removed
V2.6.1-MR1 update (2017-1-1)
*Note:This is maintenance release therefore some features may temporarily unavailable
Add: cpu-boost currently disabled but provided as an option
Add: voltage change
Add: frequency change from 386Mhz to 1600Mhz for more stable
FIx: serious bug that causing switching off mobile data make it freeze/crash
Fix: bug that causing the device freezing/crash throughout all my kernel update release
V2.6 (2016/12/27)
+Initial release
After flashing all apps start to crash.
Jimbus369 said:
After flashing all apps start to crash.
Click to expand...
Click to collapse
Quick note on the crashing apps.
T113XXU0APE2: Does not have this issue
T113XXU0APH5: When I use this ROM, than indeed everything goes bananas after booting up the tablet.
Before flashing the kernel I advice to disable all unnecessary services and with that I mean everything with Samsung in the name and also all of the google apps you don't use. It seems that com.google.process.gapps is causing a crash chain reaction so do disable this services as first. I'm using lucky Patcher for disabling services and for those who are unfamiliar with this my advice is to not uninstall an app but first disable it and later when you are satisfied you than may safely uninstall the unwanted app/service.
Bugs
Camera doesn't working
My apps continue to crash in the latest version Also after a Dalvik wipe.
Build: T113XXU0APH5
Jimbus369 said:
My apps continue to crash in the latest version Also after a Dalvik wipe.
Build: T113XXU0APH5
Click to expand...
Click to collapse
All the app?
Thunderoar said:
All the app?
Click to expand...
Click to collapse
Yes, all apps.
This is extremely exciting and can't wait to try it out!
Build T113XXU0APA5
Will let you know how it goes....
Wanted to ask (not that it's a huge deal) is there init.d support in this kernel?
If so do I need to do anything special to enable it?
Going to go ahead with it anyway and see what happens!
Thunderoar said:
* If you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
Better start laughing, 'cause my finger's pointing directly at you! And also twitching slightly out of frustration!
....Nah, it's all good. :highfive: I screwed things up all on my own by getting flash-happy. :crying:
On the plus side: It worked GREAT! :highfive: Thanks so much for putting this together for us tiny-tab users, you did a great job.
Not only did Byron (my T113's name) run smoother and faster than I've seen yet (yay!), but suddenly Mounts2SD had no issues whatsoever. Up till now it's been a supreme struggle to get /sd-ext to mount properly, to be used properly, etc. etc. - but after flashing this kernel, on first boot boom, everything just worked. Without changing anything I'd already done.
Should have just left it the way it was, eh? But noooo, I had to go "try something else" and made a stupid mistake somewhere, and now no combination of ROM / kernel / nandroid backup (meticulously organized and annotated) is booting up. I even lost TWRP for a little bit.... As penance for my sin of wanting "more", I've gotta dig up Odin, go back to stock, and start from scratch.
SO! QUESTION FOR YOU! (OR ANYBODY REALLY....)
When I fire up Odin and restore the official stock ROM (eg from Sammobile or Samsung), does that include the stock kernel too?
If the stock kernel IS a separate file, where should I look? (Your OP for the T116 kernel includes a link for that model, but not OP in here. I'm sure I can find it on my own but right now I'm just whiny.)
Not going to wait for an answer/s before moving ahead, but any response here will serve as documentation for myself and others in future!
(How don't we have a smiley for "pointing finger"? There's at least TWO in Unicode but I'm too lazy to go get it right now....)
PushyPhoenix said:
When I fire up Odin and restore the official stock ROM (eg from Sammobile or Samsung), does that include the stock kernel too?
Click to expand...
Click to collapse
Yes, it will revert itself to its normal condition such as stock rom, stock kernel and everything
PushyPhoenix said:
If the stock kernel IS a separate file, where should I look? (Your OP for the T116 kernel includes a link for that model, but not OP in here. I'm sure I can find it on my own but right now I'm just whiny.)
Click to expand...
Click to collapse
The kernel is in the md5 file or in the zip file, named boot.img
That's awesome to know, and came to the same conclusion when stock setup started asking personal questions and wanted a wifi password. Rooting it this very moment, though if I'd waited *just* a little longer I wouldn't have to. Wow you're fast!
That boot.img file info will come in handy when I screw up on any ROM, thanks! This one is going ASAP into a safe and accessible place for "just in case"....
Hey, I've always wondered and maybe you can tell me:
When flashing this type of file in recovery or adb, does the filename matter? If I rename it "T113-[build]-boot.img" for example, will anything go wrong?
Feel free to point me elsewhere to learn more about how these things work, I've followed a lot of guides but want to understand the "why" as well.
Sent from my SM-G900W8 using XDA Labs
PushyPhoenix said:
That's awesome to know, and came to the same conclusion when stock setup started asking personal questions and wanted a wifi password. Rooting it this very moment, though if I'd waited *just* a little longer I wouldn't have to. Wow you're fast!
That boot.img file info will come in handy when I screw up on any ROM, thanks! This one is going ASAP into a safe and accessible place for "just in case"....
Hey, I've always wondered and maybe you can tell me:
When flashing this type of file in recovery or adb, does the filename matter? If I rename it "T113-[build]-boot.img" for example, will anything go wrong?
Feel free to point me elsewhere to learn more about how these things work, I've followed a lot of guides but want to understand the "why" as well.
Click to expand...
Click to collapse
I do believe that when flashing a boot.img through TWRP with the image flasher, the file needs to say boot.img I may be wrong but I had issues before when I changed the name of the file to keep track of which one it was....lol... I have since started putting the boot.img files in their own folders with the appropriate name on the folder.
By the way, great to see development on this tablet. I am going to be testing this kernel in a personal build and see if I can squeeze as much out of it as I can get. So thank you dev.. Awesome work and greatly appreciated. : )
glockman4519 said:
I do believe that when flashing a boot.img through TWRP with the image flasher, the file needs to say boot.img I may be wrong but I had issues before when I changed the name of the file to keep track of which one it was....lol... I have since started putting the boot.img files in their own folders with the appropriate name on the folder.
Click to expand...
Click to collapse
That's a great idea... Ugh, adding another folder to the folder full of folders on my computer frightens me. But if that's what it takes!
Sent from my SM-G900W8 using XDA Labs
---------- Post added at 11:28 PM ---------- Previous post was at 11:23 PM ----------
Thunderoar said:
Yes, it will revert itself to its normal condition such as stock rom, stock kernel and everything
Click to expand...
Click to collapse
So I've run into a bit of a problem. Tried outFyrestone ROM and i love it, but it's based on PH5 firmware and doesn't play nice with your wonderful kernel. Which means my sd-ext is broken...
I know you're very busy (and I haven't a clue what kind of work is required), but wondered if you know when we can expect to see an update?
Thanks so much for all your hard work!
Sent from my SM-G900W8 using XDA Labs
PushyPhoenix said:
That's a great idea... Ugh, adding another folder to the folder full of folders on my computer frightens me. But if that's what it takes!
Sent from my SM-G900W8 using XDA Labs
---------- Post added at 11:28 PM ---------- Previous post was at 11:23 PM ----------
I get it, it clutters things s bit. But I am one who like an organized setup anyways so adding more folders is common for me. It may not be everyone's cup of tea so to speak.
But on my PC and in my external SD , on my tablet, I have a folder named tab "what ever", then inside there are folders named mods, ROMs, kernels and then gaops. In the kernel folder I have sub folders for just this reason and those folders will have the kernel name on it and then inside will be the standard "boot.img"..
It works for me and above all, works for TWRP.
Click to expand...
Click to collapse
First of all, sincere thanks for replying; this advice may help others as well
glockman4519 said:
PushyPhoenix said:
Ugh, adding another folder to the folder full of folders on my computer frightens me.
Click to expand...
Click to collapse
I get it, it clutters things s bit.
Click to expand...
Click to collapse
My apologies for not being more clear on what exactly 'frightens' me about this idea. There have been times when I've backed things up this way and couldn't get into them again because of the number of characters in the path and file name - they were just too long!
Mind you, this was tens of years ago on WinXP and it never occurred to me to try finding a fix.
But on my PC and in my external SD , on my tablet, I have a folder named tab "what ever", then inside there are folders named mods, ROMs, kernels and then gaops. In the kernel folder I have sub folders for just this reason and those folders will have the kernel name on it and then inside will be the standard "boot.img"..
Click to expand...
Click to collapse
That's a fantastic system, very similar to the one I'm now using, and will add new folders as you've suggested. Hopefully reading this will benefit those who are new to this world so they don't wind up with folders full of mysterious files and untagged backups for various devices, that made perfect sense at the time. (Like the one folder for my first few devices, which now looks like gobbledygook....)
Lollipop ROM for T113 (Samsung Tab 3 lite "7 wifi-only)
Topic:
Lollipop ROM for T113 (Samsung Tab 3 lite "7 wifi-only)
Is there any lollipop/marsmallow/Nougat ä ROM that works in my T113 (Samsung tab 3 lite "7)? This device runs natively Android 4.4.4, but I Really need Android 5 or higher! Lollipop would do just fine.. I took a look at most popular custom roms to this device, but most were 4.x.x.. And nothing for t113! And all of those were to T221 or so, in the list they're were few supporting T110/T111, but now T113. Does those work in this T113? Isn't it just same device?
Please tell me if you have any idea of rom with Android 5 or newer that works in this T113!
It would be awesome to have Lollipop-Slimrom or Resurrection remix with Android 5/6/7..
Even Stock Lollipop would be adequate, android 4 lacks important features...
There's many roms to this device, but they are for T2XX or T110/T111... Does any of those run in t113?
I have already rooted this tablet and installed TWRP.
Thank you so much for help in advance! Any information that gets me closer to have Lollipop or newer is very very much appreciated!
Sincerely,
tatu-o aka. mlc
PushyPhoenix;[email protected] said:
SO! QUESTION FOR YOU! (OR ANYBODY REALLY....)
When I fire up Odin and restore the official stock ROM (eg from Sammobile or Samsung), does that include the stock kernel too?
If the stock kernel IS a separate file, where should I look? (Your OP for the T116 kernel includes a link for that model, but not OP in here. I'm sure I can find it on my own but right now I'm just whiny.)
Click to expand...
Click to collapse
1.Yep
2.The stock kernel is in the md5 file which is boot.img, the md5 file I mentioned is in the stock rom
I guess I double answered this question, my bad :silly:
PushyPhoenix said:
Hey, I've always wondered and maybe you can tell me:
When flashing this type of file in recovery or adb, does the filename matter? If I rename it "T113-[build]-boot.img" for example, will anything go wrong?
Click to expand...
Click to collapse
It varies, sometimes when flashing thing through adb or recovery with filename had a space in it, it would not detect it cuz the name is spaced and separated and it didn't recognize it as a file cuz the file extension doesn't connected to the name cuz it separated/spaced.
Thunderoar said:
I guess I double answered this question, my bad :silly:
Click to expand...
Click to collapse
Hahaa, thought it sounded familiar! No problem, better to get the answer multiple times than not get an answer at all.
---------- Post added 01-29-2017 at 12:01 AM ---------- Previous post was 01-28-2017 at 11:59 PM ----------
Thunderoar said:
It varies, sometimes when flashing thing through adb or recovery with filename had a space in it, it would not detect it cuz the name is spaced and separated and it didn't recognize it as a file cuz the file extension doesn't connected to the name cuz it separated/spaced.
Click to expand...
Click to collapse
Good to know! I've had so many issues over the years, with spaces in filenames, that any renames for files like this get an underscore or dash instead of spaces. Helps in lots of other ways, too.
I AM NOT TO BE HELD RESPONSIBLE IF U DAMAGE UR PHONE / SPILL UR COFFEE / MISS UR ALARMS / ANY OTHER CALAMITY/MISHAP
DO NOT CROSS FLASH! THIS IS MENT ONLY FOR Xperia XZ.
ITS HIGHLY RECOMMENDED TO TAKE A TA BACKUP BEFORE BOOTLOADER UNLOCK!
Click to expand...
Click to collapse
It's highly recommended to use together with my tweak in this thread
Features list:
Kernel is patched by tobias.waldvogel repack tool, include dm-verity/Sony RIC off, drmfix & busybox
Build with GCC 4.9.4 toolchain
CPUQuiet Framework, base for RQBalance hotplug governor, tune for more efficient on tone
Cyan LED on fully charged
frandom - 10 to 50 faster than u/random
Disable add_random for better performance on solid state drive
Input boost (msm_performance) is optional, disabled by default
Download link:
Mediafire | Androidfilehost
How to install
Fastboot method:
Download zip file, extract and put img file together fastboot binary, open cmd and type
Code:
fastboot flash boot boot.img
Recovery method:
Put the zip file in your device's storage, reboot to recovery and flash.
TWRP thread: https://forum.xda-developers.com/xperia-xz/development/mod-sony-stock-patcher-xperia-xz-t3576493
Firmware version:
41.2.A.7.53 - latest stock kernel
Source: https://github.com/RyTekk/android_kernel_sony_msm8996
Credits:
@RyTekk - a fantastic guy who made this kernel :laugh:
@tobias.waldvogel - for amazing ramdisk repack tool
@kholk
@flar2
@Myself5
@AdrianDC
@sonyxperiadev
Let me know if I miss you
Click to expand...
Click to collapse
Works pretty well @RyTekk
Screenshot of kernel booted
First impressions are it's really smooth and seems to have great battery life compared to the last kernel I was using so I think this is a WIN. I been pretty busy lately so I haven't been doing much to my phone but I'm glad I can hop on XDA for a few mins and flash something to make my phone perform better without me having to use scripts to improve anything. Good job
Great, thanks for sharing.
Compared to androplus kernel, what are the pro/cons?
Not booting my phone with this kernel. I am using eXzistenZ v8 custom rom. Androplus Kernel v29 is OK.
Mazellat said:
Not booting my phone with this kernel. ı AM USİNG eXzistenZ v8. Adroplus Kernel is OK.
Click to expand...
Click to collapse
i can also confirm not working on existenz rom v8.0 but it will work on stock one probably.
I can confirm it working on stock rooted ROM
There might be a slight lag but a fix by turning stamina mode on then off will fix it
Standby time will be reported in a few days
eddieleon7pc said:
I can confirm it working on stock rooted ROM
There might be a slight lag but a fix by turning stamina mode on then off will fix it
Standby time will be reported in a few days
Click to expand...
Click to collapse
It seems like whatever settings we had before we flash kernel is what it uses as config. So in my findings it keeps the scheduler values and Governor values the same. So I had to edit these values as it did cause a issue. I was using duality kernel prior.
Smacksmack206 said:
It seems like whatever settings we had before we flash kernel is what it uses as config. So in my findings it keeps the scheduler values and Governor values the same. So I had to edit these values as it did cause a issue. I was using duality kernel prior.
Click to expand...
Click to collapse
I agree, I suffered noticable lags when I enabled Deez nuts 8 SE and with the kernel at the same time
Holy smokes, works very well on my XZ. I also used your kernel, which is also very fast, thanks!!
Did you will make kernel for Oreo ?
piotr7543 said:
Did you will make kernel for Oreo ?
Click to expand...
Click to collapse
I'm too lazy to upload it and I removed some core features e.g. CPUQuiet, frandom,... because they doesn't work well on stock.
AR_Beast™ Kernel
Hey there! Ayush Here
INTRO
After a lot of hard work, I am debuting at the kernel section for a new custom kernel based on latest sources by LOS. As the name suggest, these kernel is made as a All-Rounder,i.e it can provide better battery + performance . Without talking much lets go the features of these kernel.
MAIN FEATURES
CPU
Proper and Uniform Frequency Table Format.
Overclocked CPU to 1.7GHz for big cluster and1.2GHzfor little cluster (for Beast Performance).{Modified and Enhanced by me)
Support for more Governers
Darkness
Impulse
BarryAllen
ElementalX
Intel
Smartmax_eps
Lionfish
Optimized Interactive and ElementalX Governer.
System wide PowerEfficent Workqueue(for Beast Battery Backup).
[*]CPU-Boost,Hotplug Boost and Wakeup Boost
[*]Reduced CPU Load(for Beast Battery Backup).
[*]Fixed High Load average(for Beast Battery Backup).
Fast idling of CPU (for Beast Battery Backup).
Less CPU-Load=Cool Device=More Battery-Life
Various Optimizations.
Hotplugs
Added Alucard (Modified for Beast Battery Backup)
Added Thunderplug (Modified forBeast Battery Backup)
Disabled MSM_Performance hotplug (was of no use)
Thermal
Support for user controllable thermal driver which reduce CPU frequency On a set trip point ( Ported by me )
Default limit set to 50°
Advanced Core control mode
Quad core mode
Fully configurable in the adiutor
Various Optimizations
GPU
Altered GPU-Frequency Table (for Beast Battery Backup)
UnderClock GPU to 19MHz(for Beast Battery Backup)
Overclock GPU to 650MHz
Support for Adreno Idler
Various Optimizations
Battery
Enabled ARCH_Power (for Beast Battery Backup)
New PowerSuspend algorithm (for Beast Battery Backup)
Support for preventing unnecessary WakeLocks (for Beast Battery Backup)
ThunderCharge Current Control Driver v2.1.
Fast Charge Drivers
Incresed Charge current (1370)
Various Optimizations
Sound
FauxSoundControl v4.0 ( Modified and Enhanced by me)
Support for 2 Gains---Headphones, Speaker.
Provides ability to Increase or Decrease Volume beyond Default Limits.
Support for Controlling Volumes separately for left and right Headphones.
Dts sound support
Negative values works too
Display
Kcal Colour control v2
Uses custom colour profile by default for better screen vibrancy, colour reproduction (Enhanced by me)
Support for Glove Mode
Various Optimizations
MISC
Latest Linux Base 3.10.108
Based on latest sources.
Compiled with Uber 7.2.1 Optimized ToolChain
O3 and Graphite Optimizations
Support for FRandom RNG Driver (upto 50x faster than the default one).
Support for various Wake-Up Gestures including DT2W.
State Notifer support (faster and better)
Nvidia power optimizations
Varoius tweaks for better network speed
Support for Dynamic Fsync
Various Optimiztaions For Cpu and GPU
F2FS and exFAT Support
Kexec Hardboot
Support for Load Shifter Mechanism.
Various Tweaks for better battery+performance.
Supports Every MM and N roms
Added LCD notifier
Added Quick Wakeup driver
Exclusive Kernel Adiutor for configuring
This are the features which I Remember many features are omitted due to word limit
I have tried my level best to make my kernel as best as possible. From minor tweaks to major improvements, everything is done.
Installation Instructions
Boot into recovery (twrp recommended)
Wipe cache and dalvik cache
Flash AR_Beast™-Kernel Rxx.zip
Reboot to system
Done
XDA:DevDB Information
*AR_Beast* Kernel, Kernel for the YU Yureka
Contributors
Ayush Rathore
Source Code: https://github.com/AyushR1/AR_Beast-Tomato
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 9
Stable Release Date: 2018-01-29
Created 2018-01-29
Last Updated 2018-01-29
DOWNLOAD
R9 - Oreo(8.0/8.1) - https://www.androidfilehost.com/?fid=818070582850488842
Kernel-Adiutor-Mod - https://forum.xda-developers.com/android/apps-games/kernel-adiutor-mod-v6-t3740249
Telegram Group :- https://t.me/joinchat/AAAAAEEtgBFuVYjNE2yRbA
NOTES
1. Use AR_Beast Adiutor to apply settings(prebuilt in kernel zip)
2. Always turn on Apply on Boot and set Delay to 10 seconds or more
3. Always turn on Emulate Init.d option in Kernel Adiutor.
4. If you are facing WiFi/Hotspot issue then check whether your system partition has atleast 20mb free then reflash kernel or Extract wlan.ko from the .zip of kernel (located under system/lib/modules/) and place it in root/system/lib/modules/ overwriting the one already present there. Then, set the permission of the file to rw-r-r and reboot the phone. Use ES File Manager with Root Permission to do this.
5. Facing splashloops(loops on yo logo) then clean flash your rom or wipe data/cache/dalvik-cache
6. Don't use any hotplug along with core control or quad core mode if you wanna use hotplug then disable corecontrol and quad core mode. You can use Core control along with quad core mode.
PRO Sir!!
Thanks for Oreo Support Bro.,
Can we use it for nougat also ?
Will R9 version Support Nougat?
Please reply me. If not which ROM is preferrable to install? Suggest me.
Has anyone tested if this kernel works fluently with NitrogenOS 8.1 ROM ? Please do confirm as this kernel looks so tempting.
The kernel Adiutor mod is broken. Can u give another link.
da_gamer_pk said:
has anyone tested if this kernel works fluently with nitrogenos 8.1 rom ? Please do confirm as this kernel looks so tempting.
Click to expand...
Click to collapse
bro i am using this rom with my nitrogen os shekhawat 20180208 , it works super fine on nitrogen, trust me u can go with this kernel, everything is working fast and smooth
Wlan.co file is missing from the directory you mentioned. Where can I get that file? My wifi/hotspot does not work. Other than this this kernel works perfectly with nitrogen os 8.1.
thanks .. need the link for auditor mod ?
Ayush Rathore said:
NOTES
1. Use AR_Beast Adiutor to apply settings(prebuilt in kernel zip)
2. Always turn on Apply on Boot and set Delay to 10 seconds or more
3. Always turn on Emulate Init.d option in Kernel Adiutor.
4. If you are facing WiFi/Hotspot issue then check whether your system partition has atleast 20mb free then reflash kernel or Extract wlan.ko from the .zip of kernel (located under system/lib/modules/) and place it in root/system/lib/modules/ overwriting the one already present there. Then, set the permission of the file to rw-r-r and reboot the phone. Use ES File Manager with Root Permission to do this.
5. Facing splashloops(loops on yo logo) then clean flash your rom or wipe data/cache/dalvik-cache
6. Don't use any hotplug along with core control or quad core mode if you wanna use hotplug then disable corecontrol and quad core mode. You can use Core control along with quad core mode.
Click to expand...
Click to collapse
hi bro, thanks .. need the kernel auditor link, i guess its not in the build , or please tell how to use it
Kernel auditor link not working.
Please provide a new one.
praveen139 said:
Can we use it for nougat also ?
Click to expand...
Click to collapse
Yes its working perfectly in Lineage 14.1 and pubg works without lag issue
---------- Post added at 11:11 AM ---------- Previous post was at 11:06 AM ----------
jaydeep darandale said:
Wlan.co file is missing from the directory you mentioned. Where can I get that file? My wifi/hotspot does not work. Other than this this kernel works perfectly with nitrogen os 8.1.
Click to expand...
Click to collapse
get that wlan.ko from another kernel for you yureka and paste inside the kernel in module folder use zarchiver
Hariprasad01 said:
Yes its working perfectly in Lineage 14.1 and pubg works without lag issue
---------- Post added at 11:11 AM ---------- Previous post was at 11:06 AM ----------
get that wlan.ko from another kernel for you yureka and paste inside the kernel in module folder use zarchiver
Click to expand...
Click to collapse
Ive tried my level best to replace and even re compress the "wlan.ko" but nothing is working for me...
cannot open the wifi and hotspot shows error.. what can i do.. please help.. even tried re-flashing everything..
Wifi and hotspot not working.!!
This feels to be the best and the smoothest kernel that I've used till date, but the wifi and hotspot is not working. No matter what i do, even tried wlan.ko file from another kernel still its not working please help. I am using RR os and even on clean flash it is not working. Please help...
Could anybody please answer my question!!!
Shreyas Parashar said:
This feels to be the best and the smoothest kernel that I've used till date, but the wifi and hotspot is not working. No matter what i do, even tried wlan.ko file from another kernel still its not working please help. I am using RR os and even on clean flash it is not working. Please help...
Click to expand...
Click to collapse
I seriously am waiting for my reply,, please help me with the wifi fix!!!
Kernel is discontinued.
A second more
Ayush Rathore said:
Kernel is discontinued.
Click to expand...
Click to collapse
Can u just help me withthe way to wifi fix.?
help me with building of this kernel with my battery 4000maH
Ayush Rathore said:
Kernel is discontinued.
Click to expand...
Click to collapse
i am trying to build kernel from your source, (in ubuntu c9.io cloud )
but i get failed with errors, using tomato-nougat brach and GCC-prebuilt-8 toolchain
i think your build.sh contains many different command for ubuntu to understand ! isn't ?
help