Related
Hey guys
As you already might have read in either the CM11 dev thread or the Q&A section, I am working on a custom kernel for our T210(R) and T211. It's still in a pretty early stage, but the current build is fully stable, so I thought why not share it
As I'm pretty new to this community, a few words about myself: My (only) device I have been working on is the LG Optimus 4x HD, for which I also made a custom kernel (also named werewolf kernel, who would have thought of that ). Me and 2 other fellow RDs were able to "switch" many blobs with the ones from grouper, which fixed many, many issues we were facing in 4.4 with the stock 4.1 blobs. I am the official maintainer of namelessROM and vanir for the 4x HD, and am also compiling GummyROM, LegoROM, unofficial CM 11 (using grouper blobs) and SlimKat for the 4x HD on a nightly base. And as soon as we have a proper device tree for our tab, I'm sure I can port the Tab3 to all those ROMs
Now, enough chit chatting, let's talk about the kernel
It's based on @ketut.kumajaya's blackhawk kernel (thanks again, mate ) From v004 on we are based on official KitKat sources, with some additions such as:
Features:
Various network tweaks
Entropy tweaks
I/O speed improvements
cortex a9 and neon omtimizations
Added frandom
Tweaked vm dirty ratios
Dynamic read-ahead values
Added I/O schedulers: ROW, SIO, BFQ, FIOPS, V(R)
Optimized AES and SHA1 routines
Added CPU governors: Lionheart, Adaptive, Intellidemand, Hotplug, Hyper
Reduced RAM usage from logger
Updated lowmemkiller
Overclocked to 1.420 GHz by default
Disabled vsync for better 2D performance
Overclocked GPU up to 624MHz (default 416MHz)
Custom user voltage control (CPU)
Undervolted by default (-25mV)
S2W and DT2W (WIP)
Fast Charging
KSM
Bugs:
You tell me!
Installation:
Download the kernel from HERE
Reboot into recovery (recommended to make a nandroid)
Flash the kernel zip
Recommended to wipe /cache
Reboot and enjoy!
And remember to remove phservice if you want to change some CPU/GPU settings yourself
Notes:
See 2nd post
GPL:
Kernel sources
Kernel Modules (only for v001 - v003)
Used defconfig
Used build script
Thanks:
@ketut.kumajaya for the initial kernel base
@gr8nole for general help, info and testing
XDA:DevDB Information
Werewolf kernel SM-T210/T211, Kernel for the Samsung Galaxy Tab 3
Contributors
laufersteppenwolf
Kernel Special Features: Tuned for best possible performance
Version Information
Status: Stable
Created 2014-07-21
Last Updated 2015-05-25
Tweaks and other stuff
Since v002, we have an updated lowmemorykiller. It behaves a bit snappier than the old one, also with the default minfree values. However, in case you like to tweak your device a bit to make it even more snappy (like me ), I tweaked the minfree values a bit to slightly increase the free RAM without really affecting the multitasking experience. The script can be found in the attachment. All you need to do is to extract the script and place it in your /system/etc/init.d/ folder and that's it. The values will be automatically set on boot.
UV interface
The min possible voltage is 1000mV for now, and the max one is 1400mV. If you want me to lower the min voltage, please let me know.
Also, please note, that the voltage has to be changed in 12.5mV steps. If you apply for example 1110mV, it will be rounded down to 1100mV.
Fast Charge interface
The main interface is inside /sys/kernel/fast_charge/*
/sys/kernel/fast_charge/force_fast_charge (rw)
0 - disabled (default)
1 - use custom mA configured through the sysfs interface (see below)
/sys/kernel/fast_charge/ac_charge_level (rw)
rate at which to charge when on AC (1.8A to 2.3A)
/sys/kernel/fast_charge/usb_charge_level (rw)
rate at which to charge when on USB (0.5A to 1.0A)
/sys/kernel/fast_charge/failsafe (rw)
0 - disabled - allow anything up to 2.3A to be used as AC / USB custom current (USE WITH CAUTION!)
1 - enabled - behaviour as described above (default)
/sys/kernel/fast_charge/version (ro)
display fast charge version information
New kmsg layout
From v008 onwards the kmsg looks a tiny bit different. Instead of displaying the time since boot, it logs the actual time and date.
Now, you may ask yourself: "does that any good?" Sure it does. When you encounter an issue and grab a log, you can send it my way saying "the issue happened at 15:35". It is way harder to find out the exact time (in seconds) since the device booted, right?
When changing the CPU gov, you might want to keep THIS (4.1) or THIS (4.4) in mind
Changelog:
v008 [15/02/15]
- Disabled zcache
- Added KSM (including deferred timer to save battery)
- Tweaked zRAM
- New kmsg log layout (see 2nd post for more details)
- Fixed kernel version in settings
- Disabled S2W and DT2W by default
When you flash this version, please wipe cache, otherwise bad things could happen
v007 [08/12/04] RIP Beth
- Slightly more RAM from logger
- S2W and DT2W (Still WIP)
- Decreased min possible CPU voltage to 800mV
- Undervolted by default (-25mV)
- Fast Charge support
v006 [01/11/14] MOAH CPU
- Added CPU UV interface
- OC'ed further to 1420MHz
- Max GPU freq limited to 624MHz until all issues are resolved
- Fixed init.d support on T211
v005a Minor fix
- Fixed DeviceControl GPU support
- Output all GPU freqs in Hz instead of KHz
v005 [18/10/2014] SM-T211 support
- Added support for the T211 variant (thanks to @sscsps for testing)
- Merged latest Sammy updates
- Enabled I/O accounting (only needed for devs)
- zcache enabled by default
- GPU OC up to 624MHz (default is 416MHz)
v004 [25/09/2014] Android 4.4 support
- Re-based on latest KitKat sources
- Re-added almost all features from v003
- Removed 156MHz freq step (causing trouble for still unknown reasons)
- Overclocked to 1.344 GHz (instead of 1.205GHz)
- Disabled vsync for better 2D performance
- Disabled "reboot recovery" to avoid being stuck in recovery on old recoveries (special version)
v003 [31/08/2014]
- new govs: Hotplug, Hyper
- new freq step @ 156MHz
v002 [25/07/2014]
- reduced RAM usage from logger
- new/updated lowmemkiller (see attachment in 2nd post for init.d script with tweaked minfree values)
v001 [18/07/2014]
- initial release
good work you link where ? and nice job workıng 4.1.2 ???? 4.2.2 .4.4.2 kernel android version what? @safariking [MENTION=3034891]gr8nole[/MENTION
not working dont flash ı using ultimate rom safarinking by 4.1.2 soft brick device
Not working yet hope you get it working good luck
Sent from my SPH-L720 using XDA Premium 4 mobile app
sorry guys, I just found the issue... my last commit breaks the GPU module so it doesn't compile, doesn't get copied over into the zip and so does not get replaced on your system, but the new kernel cannot load the stock module as I used another defconfig name...
Will be fixed ASAP
EDIT: Fixed and uploaded
laufersteppenwolf said:
sorry guys, I just found the issue... my last commit breaks the GPU module so it doesn't compile, doesn't get copied over into the zip and so does not get replaced on your system, but the new kernel cannot load the stock module as I used another defconfig name...
Will be fixed ASAP
EDIT: Fixed and uploaded
Click to expand...
Click to collapse
Nice work. This kernel works. Will monitor battery life and game performance.
Sent from my SM-T210R using XDA Free mobile app
laufersteppenwolf said:
When changing the CPU gov, you might want to keep THIS in mind
Click to expand...
Click to collapse
is there anyway to flash it on tab 3 t211 kk 4.4.2 firmware
big job thank can you add overclock gpu ? downclock?
gr9nole said:
big job thank can you add overclock gpu ? downclock?
Click to expand...
Click to collapse
You can check if there is OC available by installing "No-Frills CPU Control" from the google play store
a question about toolchain
@laufersteppenwolf
hi, i would like to know which toolchain you used to build this kernel, a direct link to it would be helpful.
also, using the supplied defconfig can i make [defconfig] and then make -j# or are there additional things to do?
i build kernel for tab3 10 fine but setting up my system for sm-t210 is proving stubborn. there is another project going on
that i would like to learn from and help with, your help would be appreciated.
thank you for reading.
m
Anil Shovo said:
is there anyway to flash it on tab 3 t211 kk 4.4.2 firmware
Click to expand...
Click to collapse
I do not think so, as I'm using the ramdisk from t210, which most likely isn't compatible with t211, and sure not with 4.4.2
gr9nole said:
big job thank can you add overclock gpu ? downclock?
Click to expand...
Click to collapse
step by step
moonbutt74 said:
@laufersteppenwolf
hi, i would like to know which toolchain you used to build this kernel, a direct link to it would be helpful.
also, using the supplied defconfig can i make [defconfig] and then make -j# or are there additional things to do?
i build kernel for tab3 10 fine but setting up my system for sm-t210 is proving stubborn. there is another project going on
that i would like to learn from and help with, your help would be appreciated.
thank you for reading.
m
Click to expand...
Click to collapse
for this build, I used CM's 4.6 toolchain, but that'll change soon
I will also push the build script and modules to github ASAP, so just wait for that, as setting up the modules and stuff isn't the most pleasant thing to do
Werewolf is not playing lol so what your saying is that we will be having cm 11 and aosp all the good stuff soon ?
Sent from my SM-T210 using XDA Premium 4 mobile app
I've used this kernel for 2 days. I have noticed the screen flickers on the 2nd day and while watching a movie (while plugged in) the tab was battery drained battery was 30% when I started watching. Can others confirm this?
Goodside. Battery life is enhanced and performance is the same. Nice work on this
Sent from my SM-T210R using XDA Free mobile app
trazfer said:
I've used this kernel for 2 days. I have noticed the screen flickers on the 2nd day and while watching a movie (while plugged in) the tab was battery drained battery was 30% when I started watching. Can others confirm this?
Goodside. Battery life is enhanced and performance is the same. Nice work on this
Sent from my SM-T210R using XDA Free mobile app
Click to expand...
Click to collapse
I was experiencing the exact same flickering myself as well, but on stock kernel
This flickering isn't kernel related, but ROM related. Sammy must have screwed up the auto backlight handling, as it only happens at some certain brightness values
No ir blaster
Edit: This is what I get when I open peel smart remote
laufersteppenwolf said:
I was experiencing the exact same flickering myself as well, but on stock kernel
This flickering isn't kernel related, but ROM related. Sammy must have screwed up the auto backlight handling, as it only happens at some certain brightness values
Click to expand...
Click to collapse
He is tottaly right, also sometimes when you are using this tab, the screen locks by itself
Ripshock said:
No ir blaster
Edit: This is what I get when I open peel smart remote
Click to expand...
Click to collapse
Check your build.prop to see what the ro.build.product shows.
gr8nole said:
Check your build.prop to see what the ro.build.product shows.
Click to expand...
Click to collapse
I am using stockrom series with a build for sm-t210 but I have used device spoofer and spoofed my original build sm-t210r
Ripshock said:
I am using stockrom series with a build for sm-t210 but I have used device spoofer and spoofed my original build sm-t210r
Click to expand...
Click to collapse
It works for me with the stock firmware/rom with this kernel.
Hellow!
This kernel works only on stock and some custom KItKat 4.4.2 TouchWiz ROMs for Samsung Galaxy S4 mini I9190/I9195/I9192 variants!
Features:
Based on last official kernel source for GT-I9195 (used SilviuMik's branch)
Synced with E370KKTU2BOD2 kernel source (KK 4.4.4 kernel for SHV-E370K variant of Galaxy S4 Mini LTE (announced only for Korea))
CPU Overclock (OC): up to 2052MHz
CPU Underclock (UC) down to 81MHz
GPU Overclock up to 627MHz
CPU Voltage Control (VC)
Hotplug thread infrastructure
Faux123's Intelliplug
MyFluxi MSM-hotplug new
Alucard-hotplug new
Lazy-hotplug new
Gamma control
Faux123's GPL Sound Control 2.1
Sweep2Sleep
Fast charge
Upgraded taus88 to taus113 algorithm for entropy generator
Added and realy used frandom (fast random number generator)
Krait optimized strcmp and memcmp
Motorola MSM memcopy enhancements (memutils) to improve of the memory subsystem performance
CPU-boost new
Quickwakeup new
KSM (Kernel SamePage Merging)
Timer slack controller
Speedup late resume patch for faster wakeup of the device
F2FS support
NTFS support with full read/write access
init.d support
Updated exFAT module to v1.2.12
LZ4 compressor for zSwap new
TCP-cong: westwood, vegas, reno and etc.new
Set SELinux always into "Permissive mode"
Pre-installed bosybox (placed in /sbin folder)
Compiled with Linaro GCC 4.9.4-2015.06 Toolchain
Additional Governors:
Impulse
[*]Intelliminmax
[*]Intelliactive
[*]Lionheart
[*]Ondemandplus
[*]Smartmax
[*]Preservative
[*]Wheatly
[*]Intellidemand new
[*]Alugard new
[*]Slim new
Additional I/O Schedulers:
FIOPS (Fair Input/Output Per Second)
[*]SIO (Simple I/O)
Credits:
@arco68
@Christopher83
@F4k
@junkyde
@SilviuMik
@GrarakInstallation instructions:
for ODIN:
1. Extract XXXX-ALX-x.x.x.md5 from XXXX-ALX-x.x.x.tar.zip
2. Flash with ODIN XXXX-ALX-x.x.x.md5 file
for CWM:
1. Copy XXXX-ALX-x.x.x.zip (without tar) to your sdcard
2. Reboot into CWM recovery
3. Choose "Install zip from sdcard"
4. Select XXXX-ALX-x.x.x.zip kernel and confirm installation.
Download:
Link1
Link2
XDA:DevDB Information
Custom TouchWiz KK4.4.2 Kernel for I9190/I9195/I9192, Kernel for the Samsung Galaxy S 4 Mini
Contributors
alexax66
Source Code: https://github.com/alexax66/KitKat_kernel_samsung_msm8930-common
Kernel Special Features: CPU and GPU Overclocking, CPU Underclocking, CPU Voltage Control, Advanced CPU hotplugs, Gamma control, Faux123's Sound Control, Sweep2Sleep, Additional Governors and I/O Schedulers, KSM, F2FS, NTFS, Timer Slack Controller, Fast charge
Version Information
Status: Stable
Current Stable Version: ALX-0.1.2
Stable Release Date: 2015-11-15
Current Beta Version: ALX-0.1.3
Beta Release Date: 2015-12-30
Created 2015-08-15
Last Updated 2015-11-18
How to use kernel features
- for CPU, GPU, Hotplug and Gamma Control tunings use Kernel Auditor by Grarak
- for Faux123's Sound Control tuning use FauxSound Audio/Sound Control
- set of some features for switching through a parameters of the build.prop:
For all kernel version:
- to enable Sweep2Sleep:
Code:
ro.config.sweep2sleep=true
- to enable init.d support add in build.prop:
Code:
ro.config.sysinit=true
Only for ALX-0.1.0 and later:
- to enable KSM:
Code:
ro.config.ksm=true
Only for ALX-0.1.1 and later:
-to enable Adaptive LMK:
Code:
ro.config.adaptive_lmk=true
Read about how adjust LowMemoryKiller with management of not killable processesin
Only for ALX-0.1.2 and later:
Use only one of this hotplugs!
-to set Alugard-hotplug as default:
Code:
ro.config.alucardplug=true
-to set MyFluxi MSM-hotplug as default:
Code:
ro.config.msm-hotplug=true
-to set Intelli-hotplug as default:
Code:
ro.config.intelliplug=true
-to set Lazy-hotplug as default:
Code:
ro.config.lazyplug=true
Chaneglog:
ALX-0.1.0
ALX-0.1.1
ALX-0.1.2-Release
ALX-0.1.3
Full Changelog
Kernel tested by me over month, all :good:
---------- Post added at 09:23 AM ---------- Previous post was at 09:10 AM ----------
One thing, gamma control work only in device control app, and after reboot is set by default, maybe in future is will be fixed
can i use with ploiki's rom?
00ehsan00 said:
can i use with ploiki's rom?
Click to expand...
Click to collapse
I not test this kernel in ploiki's rom, but i think that it work without any problems.
OOMMGG!!! Finallyyyyyy!!! I can't believe it!!!
THANK YOUUUU! :victory: :good:
o0chtm0o said:
OOMMGG!!! Finallyyyyyy!!! I can't believe it!!!
THANK YOUUUU! :victory: :good:
Click to expand...
Click to collapse
Yep)))
Some summer day i tired waiting kernel from f4k and ask my friend alexax66, he say ok no problem, next day i tested first version
P.S.
By the way, he not use stock, he use CM, and he did it for us just because he good man :good:
denon480 said:
Yep)))
Some summer day i tired waiting kernel from f4k and ask my friend alexax66, he say ok no problem, next day i tested first version
Click to expand...
Click to collapse
Wow! It's INCREDIBLE!! I have no words. I hope it's not the first and last work, I hope OP can continue with this project. It's amazing! I was waiting for this since loooooong time ago, losing any hopes
o0chtm0o said:
Wow! It's INCREDIBLE!! I hace no words. I hope it's not the first and last work, I tope OP can continúe with this project. It's amazing! I was waiting forma this since loooooong time loosing any hopes
Click to expand...
Click to collapse
not first and not last)))
Soon, OTG and maybe ext4 support
it's stable and there is no battery drain with overclock and underclock.
it's fully work with ploiki's rom too.
do u have plane to add otg and bln support?
and another question is that how can i use sweep2sleep?
thanks again for kernel.:good:
00ehsan00 said:
it's stable and there is no battery drain with overclock and underclock.
it's fully work with ploiki's rom too.
do u have plane to add otg and bln support?
and another question is that how can i use sweep2sleep?
thanks again for kernel.:good:
Click to expand...
Click to collapse
We test some new patches bln, dosent work
add in build.prop
ro.config.sweep2sleep=true
reboot
swipe on the bottom screen from left to right, is lock the phone
Tested new kernel with memory patches.
Just for info, work on kernel dont stop
Very very good job... I appreciate your work with this kernel ... I have only one question if is possible, what are the best governor and scheduler to use for a balance between performance and battery?
Sent from my GT-I9195 using xda premium
petrevirgil said:
Very very good job... I appreciate your work with this kernel ... I have only one question if is possible, what are the best governor and scheduler to use for a balance between performance and battery?
Sent from my GT-I9195 using xda premium
Click to expand...
Click to collapse
I personally like ondemand/cfq I find it makes things that tiny bit more responsive like 1080p video recording and scrolling thru my Google Keep widget. Ondemand for me gives some of the best battery.
who have tested this kernel with the rom "N5 four mini" ?????
better than silviu for battery ???
Will this work on I9192?
Loulou-13 said:
who have tested this kernel with the rom "N5 four mini" ?????
better than silviu for battery ???
Click to expand...
Click to collapse
I'm currently using this with N5 four mini rom, works so awesome, incredible battery life, there is just one problem though, private mode does not work with this kernel, but they said its because of the rom not fully compatible with the kernel., i don't know if this works fine with s6 port 5.1, havent tried yet.
Can I use with S6 Mini Port Rom
alexax66
sajid0786 said:
Can I use with S6 Mini Port Rom
alexax66
Click to expand...
Click to collapse
Yes, you can use this variant
** Note: This kernel is end-of-life and will no more be maintained. There will be no LineageOS 15.1 or newer kernel be available anymore **
Hi all,
some of you know me from the other OnePlus (One and Two) or Samsung devices areas, where I provide my kernels already for more than two years to OnePlus One, OnePlus Two, Galaxy S5, S3 and Note 10.1 users for all sort of platforms (Samsung, Cyanogenmod, Omnirom etc.)
Now I own a OnePlus X device and decided to port my kernels also to this device.
Please note:
I am not heading to have as many features as possible implemented, this is not my design goal. If you are more into that, move on to other kernels. If you are searching for a good mix of improvements and new functions while not sacrificing stability, you are welcome here (see below the history section for more info).
Compatibility
Important: This kernel is only meant to be compatible with official Cyanogenmod and nothing else.
So when the kernel does not run on custom rom XYZ, do not even bother me with it or ask hundred times in the thread for compatibility.
I could not care less about it !!
Important notes
When using new anykernel concept Boeffla-Kernel: Flash stock kernel of rom first !
Make sure you flash the correct kernel version, depending on whether you really use CM or a different OS !!!
Also note: You have to use Boeffla-Config app which I provide on my homepage to tweak the kernel. 3rd party apps will not be able to unleash the full power of the kernel.
Support
First read the FAQ section on the Homepage !!!
Click here to learn about all possible kernel settings in the config app (quite outdated, as it is focused on S3 still).
Click here to learn about using the config app (quite outdated, as it is focused on S3 still).
I will refuse to give support if you do any undervolting and experience freezes or hot reboots.
I will also not provide any support if you do not use Boeffla-Config app to tweak the kernel, other 3rd party tweaking apps are known (and intended) to cause issues.
I will refuse to give support if you have xposed framework installed and reporting any kind of weird issues. My opinion to xposed it quite clear: too powerful for >90% of the users that just mess up their system with it.
Otherwise, you can get in touch with me via the support e-mail address: [email protected]
Please provide kernel version, rom version, a detailed issue description and ideally supporting screenshots or log files.
Change logs
(you can also access them directly in Boeffla-Config V2 by pressing menu and selecting "change log...")
Change log for CM13 kernel - Click here
Features
Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
Full integration with Boeffla-Config V2 (you need at least version 2.2.42 or higher !!!) configuration app (get it from http://www.boeffla.de) to configure all kernel settings
Additional governors: zzmoove, intelliactive, intellidemand, intellimm, wheatley, smartmax, smartmax_eps, slim, intellimm, pegasusq, nightmare, lionheart, impulse, ondemandplus, yankactive
Zzmoove supporting native hotplugging profiles
Additional schedulers: fiops, bfq, sio, tripndroid, zen
Many Hotplug tweak profiles (Default, Optimized, 1 core max, 2 cores max, 3 cores max, 2 cores min, 3 cores min, 4 cores min, 2 cores exact, 3 cores exact)
Notification LED control (fading, speed, brightness)
Boeffla-Sound engine (Headphones volume configurable)
True dynamic FSync (activated if screen on, deactived if screen off), configurable
Touch boost frequency and duration configurable, touch boost switch
Additional swipe2wake gestures
Additional swipe2sleep gestures
CPU Overclocking up to 2,57 GHz
CPU Voltages interface for undervolting/overvolting
GPU idle frequency 27 Mhz added
GPU governor selection support with fixed simple_ondemand
Show GPU frequency usage per frequency in Boeffla-Config
KCAL color control driver
Swipe2wake gestures
Swipe2sleep gestures
Boeffla generic wakelock blocker V1.1.0 (documentation)
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
System Tweaks predefined supported
Kernel logger (dmesg) configurable
Charge rates for AC charger and USB charging separately configurable (set charge rate to 0 to have stock charge logic back)
CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
NFS support (module)
exFat opensource support
NTFS support (module) - read-only
XBox support (module)
OTG-Ethernet support (module)
TCP Congestion changed to Westwood
Multiple additional TCP congestion algorithms available
Swap supported
init.d support (in /system/etc/init.d - set correct permissions!)
Default entropies increased
Automatic EFS backup
Full support for mpdecision for best compatibility and smoothness (no min cpu frequency reset, use Boeffla-Config to configure min frequencies only)
Integrated full busybox 1.24.2 (own compilation)
Kernel initialisation log file (with history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Presets supported in Boeffla-Config by kernel (Extreme power, power, normal, battery friendly and battery saving)
Updated wifi drivers
Kexec hardboot patch for multirom usage (not supported, not fully working)
Google gcc 4.9 toolchain used for best stability
Always using latest CM Initramfs
Always based on latest CM kernel sources (https://github.com/CyanogenMod/android_kernel_oneplus_onyx)
Note: I do NOT upstream the kernel to higher Linux kernel versions anymore as this usually has zero benefit but likely introduces new issues + is a waste of effort in the end
Download
For all information and downloads (stable AND testing versions), visit the Boeffla-Kernel homepage:
www.boeffla.de
History and design targets
Basically I created my first Boeffla-Kernel in 2012 as there was no kernel for the Samsung Galaxy S3 around that had exactly the mix of functionalities that I wanted. I wanted to have full flexibility in undervolting and charge rates for instance, but did not like the sharpness and/or brightness tweaks many kernels have implemented as per default.
Hence, I began to create my own kernel after a while, adding all the features I like. This is the result of my work, which in the end I decided to share with you. I hope you like it as much as I do.
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. Also it does not aim to have the broadest feature set available everywhere.
It aims more for a good mix of all, not sacrificing stability and functionality in the end.
And - most important: It aims to stay quite close to stock !!!
These design targets are also valid for the OnePlus kernel here!!!
This said, I will definitely NEVER implement:
things I do personally not need
things I do not like
things that are in any way dangerous
anything which is highly experimental
f2fs - it is known to cause various issues and compatibility problems
custom hotplugging algorithms
a CAF based kernel
anything that requires upstreaming of kernel parts to a higher kernel major version
So do not even ask for it if it falls into the listed categories. Everything else I am happy to check and decide.
And: I do not really care about benchmark numbers, they say almost nothing as long as something is not completely wrong. Important for me is the feel-good factor.
I am also not interested in gaming at all, so never expect a gamer kernel. It will just not happen...
Compatibility
To reiterate it again: Flash the correct kernel depending on whether you are using CM or another rom !!!
Configuration of the kernel
To tweak and configure the kernel, manually load and install the app "Boeffla-Config V2" from the downloads section on www.boeffla.de.
You need at least version 2.2.42 or higher for the OnePlus X Boeffla Kernels.
Donation
If you like my work, feel free to donate: Donation-Link
If you donate at least 2,49 EUR (to be in line with the donation app prices on Google Play store), you will receive a personal donation code which unlocks some nice little comfort functions in Boeffla-Config V2 on top.
Source code
All sources can be found in my Github repository: http://github.com/andip71
Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* ZaneZam
* Grarak
* Yank555
* Hardcore
* Chainfire
* AndreiLux
* Netarchy
* Gokhanmoral
* Simone201
* Mialwe
* Entropy512
* Faux
* Harunjo
* FranciscoFranco
* Ak
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work !!!
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in your custom recovery and safely store your personal data before you flash a new kernel.
Cheers and enjoy
Andi
Latest change logs:
CM14
http://kernel.boeffla.de/oneplusx/boeffla-kernel-cm/cm14.0/changelog.htm
CM13
http://kernel.boeffla.de/oneplusx/boeffla-kernel-cm/cm13.0/changelog.htm
Configuration and profile thread
http://forum.xda-developers.com/oneplus-x/general/profiles-boeffla-kernel-profiles-t3330187
*** You want my support? Then stick to my rules ***
Guys, I am receiving more and more completely useless support requests in different threads. Useless because people provide nothing to be able to help, not even the minimal possible information they could give.
Hence, I will now remind anyone again on the support guide lines stated here:
http://boeffla.de/index.php/support/support
Also you need to ensure you follow the installation guide lines incl. trouble-shooting stated here:
http://boeffla.de/index.php/support/installation-how-to
And to cut a long story short: If you do not at least provide what I request in the support guide lines, I will IGNORE YOUR REQUESTS IN FUTURE.
Straight and simple. I have enough of people wasting my time just because they are too lazy to write details.
Period.
Also as a reminder:
you use xposed? -> no support, everything is your own issue
you use a custom rom and not the official stock or CM one? -> good luck, you are on your own
you undervolt or overclock? -> have fun, but without my support
Sorry, this might sound harsh (and it is meant to sound harsh), but you cannot imagine about how crappy support requests can be. Stating something does not work is just not enough.
Please consider that!!!
Andi
Am I going to have the first post here ?
Naman Bhalla said:
Am I going to have the first post here ?
Click to expand...
Click to collapse
Oh yes, looks very much like that
You're already making my day a good one, bro. Thanks! Time to play.
jonrodz said:
You're already making my day a good one, bro. Thanks! Time to play.
Click to expand...
Click to collapse
Testing new kernel on RR Rom, till now all seems to work fine :good:
already tested on exodus rom,stucking at booting.So anyone who use exodus rom need not to try.
nihilista said:
Testing new kernel on RR Rom, till now all seems to work fine :good:
Click to expand...
Click to collapse
... on your own risk. Don't report any issues if you have them.
Andi
Lord Boeffla said:
... on your own risk. Don't report any issues if you have them.
Andi
Click to expand...
Click to collapse
No, i won't Just wanted to give a little feedback for those who are interested. Btw, its own risk all the time if developer said its alpha version without support, i know that and hope it won't burn my device
nihilista said:
... i know that and hope it won't burn my device
Click to expand...
Click to collapse
You would be for sure the first one
Andi
@Lord Boeffla
You should update your signature if you have time, I mean if you are still using CM12.1 official nightlies on the one device then idk
hellcat50 said:
@Lord Boeffla
You should update your signature if you have time, I mean if you are still using CM12.1 official nightlies on the one device then idk
Click to expand...
Click to collapse
Yeah, that was VERY outdated meanwhile.
I gave it some rework.
Andi
nihilista said:
Testing new kernel on RR Rom, till now all seems to work fine :good:
Click to expand...
Click to collapse
I'll try it later... Right now l'm on cm13. Tried it on aicp but it bootloops.
jonrodz said:
I'll try it later... Right now l'm on cm13. Tried it on aicp but it bootloops.
Click to expand...
Click to collapse
Yeah... Use Ashwins build. Tameseks and AOKP also work well
Just to report:
I am currently on AOKP with Xposed installed, flashed Boeffla kernel over blu_spark kernel. Didn't encounter any issue so far with zzmove and Battery Yank governor settings.
Will make a full charge and see how battery life is tomorrow.
Thanks, Lord Boeffla, for your work. Greetings from Cologne :good:
orville87 said:
Just to report:
I am currently on AOKP with Xposed installed, flashed Boeffla kernel over blu_spark kernel. Didn't encounter any issue so far with zzmove and Battery Yank governor settings.
Will make a full charge and see how battery life is tomorrow.
Thanks, Lord Boeffla, for your work. Greetings from Cologne :good:
Click to expand...
Click to collapse
Did you start Boeffla-Config once after you flashed the kernel?
Just curious whether it complained about missing mpdecision (bluspark in the past on oos removed mpdecision...).
Only being curious...
Andi
kaixuan_1995 said:
already tested on exodus rom,stucking at booting.So anyone who use exodus rom need not to try.
Click to expand...
Click to collapse
Exodus i guess is AOSP based... N this kernel CM13 based... So!!!!
You can get what i am saying... It will definitely stuck at boot. :fingers-crossed:
Finaly.. I think its now the time to move to CM13
Thanks Lord
Lord Boeffla said:
Did you start Boeffla-Config once after you flashed the kernel?
Just curious whether it complained about missing mpdecision (bluspark in the past on oos removed mpdecision...).
Only being curious...
Andi
Click to expand...
Click to collapse
Yeah, I did, but no complaints about the missing mpdecision. At least there was no popup window or a red text indicating something important.
I AM NOT TO BE HELD RESPONSIBLE IF U DAMAGE UR PHONE / SPILL UR COFFEE / MISS UR ALARMS / ANY OTHER CALAMITY/MISHAP
DO NOT CROSS FLASH! THIS IS MENT ONLY FOR Xperia Z5.
ITS HIGHLY RECOMMENDED TO TAKE A TA BACKUP BEFORE BOOTLOADER UNLOCK!
Click to expand...
Click to collapse
Features list:
Kernel is patched by tobias.waldvogel repack tool, include dm-verity/Sony RIC off, drmfix & busybox
CPUQuiet Hotplug: rqbalance (default), runnable
CPU Governor: interactive (*), ondemand, performance (default)
IO Scheduler: noop, deadline, row, cfq, vr, zen, fiops, tripndroid (default)
TCP Congestion: westwood (default), reno, cubic
(*)will be set after boot, depends on init.qcom.post_boot.sh, stock default is interactive
Build with GCC 4.9.4 toolchain
Stability, power and performance enhancement
Unified kernel, one image for both models
CPUQuiet Framework, base for RQBalance hotplug governor, tune for more efficient on kitakami
interactive governor enhancement (backport from 3.18 kernel)
Power efficient from NVIDIA
Cyan LED on fully charged
LED blinking
Extra IO schedulers
Overcharged current from 1500mA to 1800mA
frandom - 10 to 50 faster than u/random
Lower backlight at boot, save inefficient power a bit
Disable add_random for better performance on solid state drive
Enable High Performance Mode for WCD9330
Improve suspend and idle state
Download link:
Stock:
Mediafire | Androidfilehost
LineageOS:
Mediafire | Androidfilehost
How to install
Fastboot method:
Download zip file, extract and put img file together fastboot binary, open cmd and type
Code:
fastboot flash boot boot.img
Recovery method:
Put the zip file in your device's storage, reboot to recovery and flash.
TWRP thread: https://forum.xda-developers.com/crossdevice-dev/sony/twrp-3-1-0-z5-z5c-z5p-t3571050
Firmware version:
32.3.A.2.33 - latest stock kernel
Source: https://github.com/RyTekk/sony_kernel_kitakami_8994
Credits:
@RyTekk - a fantastic guy who made this kernel :laugh:
@zacharias.maladroit - for helping me a lot, really much, countless
@Tommy-Geenexus - same as Zach and commits for kernel improvement
@tobias.waldvogel - for amazing ramdisk repack tool
@flar2 for enhancement commits
@BlackSoulxxx for charging hack
@Myself5
@LineageKitakamiTeam
@codeaurora
@Linaro
@NVIDIA
@Sony
Let me know if I miss you
Click to expand...
Click to collapse
Hey is this for stock or cyanogenmod?
HaoZeke said:
Hey is this for stock or cyanogenmod?
Click to expand...
Click to collapse
Stock 32.2.A.0.253, sorry for forgetting that.
Seems pretty nice , no lags , maybe slightly smoother ?
Battery -1% during night ( 7hours)
I had a small problem with seeder app (entropy generator) keeps asking for Root and never can turn it on, I'd same problem with stock .253 kernel but Androplus V36 don't have this problem , using latest supersu 2.76
korom42 said:
Seems pretty nice , no lags , maybe slightly smoother ?
Battery -1% during night ( 7hours)
I had a small problem with seeder app (entropy generator) keeps asking for Root and never can turn it on, I'd same problem with stock .253 kernel but Androplus V36 don't have this problem , using latest supersu 2.76
Click to expand...
Click to collapse
I don't recommend you to use Seeder or apps/tweaks like this (e.g CrossBreeder), your entropy will be forced to keep a highest value as possible, yah maybe there's a little smoother in UI but some tasks may be done slower (I got worse time loading of Asphalt 8 due to this). Btw, frandom is good enough to you don't need those high entropy value
Does it work on MWA and X ROM?
RyTekk said:
NOTE 3: This kernel has been hard testing on E6683, it should work on other DSDS variant (E6633), single devices got sd card not detected and it's out of reach for me atm
Click to expand...
Click to collapse
As for SDCard detection: It depends on the appended DTB used. Appended DTB is specified in the defconfig. Basically the dtb itself is the only difference between Z5 DSDS and Z5 ROW. Appending both to the same kernel _should_ work in theory (This approach was tested on the AOSP 1.2.2 Kernel), however this doesnt work on the Z5 Devices, as both DSDS and ROW share the same msm-id in the defconfig, that way the Bootloader itself can't determine which is the correct dtb, and uses the one which is appended first. This means you need seperate Kernel images for ROW and DSDS.
Took me a while to figure out for OM5Z, though I'd share it so you can save up that research time
Can any developers make an AndroPlus V36 for E6683/33 (with full SD CARD support)?
Is recovery include in kernal
Myself5 said:
As for SDCard detection: It depends on the appended DTB used. Appended DTB is specified in the defconfig. Basically the dtb itself is the only difference between Z5 DSDS and Z5 ROW. Appending both to the same kernel _should_ work in theory (This approach was tested on the AOSP 1.2.2 Kernel), however this doesnt work on the Z5 Devices, as both DSDS and ROW share the same msm-id in the defconfig, that way the Bootloader itself can't determine which is the correct dtb, and uses the one which is appended first. This means you need seperate Kernel images for ROW and DSDS.
Took me a while to figure out for OM5Z, though I'd share it so you can save up that research time
Click to expand...
Click to collapse
I tried to build a kernel with diffconfig sumire but the sd card wasn't recognized, so I decided to not support devices that I don't own for now if there's no one who's interested in it. I will ask you later
rajdeep312 said:
Is recovery include in kernal
Click to expand...
Click to collapse
It does, with TWRP from tobias's tool.
ROM_For_Z5 said:
Does it work on MWA and X ROM?
Click to expand...
Click to collapse
As long as it's stock based.
Plz make patch for reducing heat or downclock big cores
rajdeep312 said:
Plz make patch for reducing heat or downclock big cores
Click to expand...
Click to collapse
Use kernel manager apps (e.g Kernel Adiutor) instead to adjust it, I kept it due to boosting the bootup time.
ROM_For_Z5 said:
Does it work on MWA and X ROM?
Click to expand...
Click to collapse
Yes
Sent from MWA Pro-Spect V1.0.0 On My Z5
@RyTekk
Xposed is not working for me , I tried diffrent version from v85 to v86.2 all didn't work
korom42 said:
@RyTekk
Xposed is not working for me , I tried diffrent version from v85 to v86.2 all didn't work
Click to expand...
Click to collapse
I have no idea, I don't use Xposed, could you take a try to use xposed systemless by tobias's repack tool?
Can you make a build for Z3+ ? by using zach kernel ideas.
Thanks
The kernel seems not working on custom ROM, like X ROM and MWA. Everytime I flash your kernel, it can boot normally but the SystemUi always get force closed. However, it seems work quite good on my friend's Z5 E6633 running stock firmware.
Thanks for your work.
Hello, thanks for the contribution. Have you got any plan for adding z5c support?
sirdoha said:
The kernel seems not working on custom ROM, like X ROM and MWA. Everytime I flash your kernel, it can boot normally but the SystemUi always get force closed. However, it seems work quite good on my friend's Z5 E6633 running stock firmware.
Thanks for your work.
Click to expand...
Click to collapse
I have tested on purely stock so I can't adapt for other custom ROMs, it's not my failure :laugh:
ninestarkoko said:
Hello, thanks for the contribution. Have you got any plan for adding z5c support?
Click to expand...
Click to collapse
I mainly focus to make the kernel to be stable before bring it to other devices, and I have to finish my assignments first.
New version - V2 is up
changelog said:
Add darkness governor
Fix kernel panic on boot when another governor which is different from interactive is set
A lot of memory enhancement and leakage fixes
Battery usage optimization
Bug fixes, security and performance enhancement
ASoC: gapless mode actived and fixed, more enhancement
Click to expand...
Click to collapse
Download:
Androidfilehost | Mediafire
Thunderoar Kernel For SM-T116
(Tab 3 Lite 7.0 3G)
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards, corrupted partition, nuclear disasters
* Please do some research before using this mod!
* YOU are choosing to make these modifications,
* If you point the finger at me for messing up your device, I will laugh at you.
Features:
Overclocked
Deferred Timer for KSM
USB Fast Charge
Arch Power
Frandom
Powersuspend for battery life/saving
QuickWakeup for battery life/saving
Dynamic Sync Control
Fsync control on/off
Voltage Tweak
NVS hibernate driver
Multicore Power Saving
Schedule workqueues on awake CPUs to save power
CPU Boost
Adaptive Low Memory Killer
Software CRC control toggle
Gentle Fair Sleepers toggle
and so on...
CPU Hotplug:
AutoSMP
Added CPU governors:
Sprdemand
Conservative
Ondemand
Userspace
Powersave
Interactive
Performance
and so on...
Planned Update
-nothing i guess
Bugs(s)
-No MORE BUG!
Custom kernel Installation:
Download the kernel from here
Choose the tar.md5 if flashing from odin
Choose the zip files if flashing from custom recovery
Choose the latest version
Odin Instruction:
Open any version of odin
Choose your tar.md5 file from AP Tab
And Start
Custom Recovery Instruction:
Reboot into recovery if usin zip files (recommended to make a nandroid)
Flash the kernel zip
Reboot and enjoy!
Stock kernel Installation:
Download the stock kernel from here
Enter recovery mode, choose install, choose install image,
and then go to the directory of your downloaded stock kernel
choose it and then check mark on the boot circle.
And then flash it :good:
Notes:
20/12/2107
Kernel Update!!
Thunderoar-Kernel 5.0 Codenamed "Angel Beats!"
Fix all issues regarding MTP not working
and random reboot, is this a comeback? xD, i don't know xD
It appears that my kernel uses a lot more memory than i expected,
Possibily some problem with memory patch in the kernel source
The workaround for this problem is you have to increase your disksize
In the kernel adiutor, if it stays at 300mb, it will not enough and cause a problem
Which is stuck or complete crash of device. Recommended size is 500mb or more if
you encountered it again and set swappiness into 60
20/11/2017
Im back guyss, im out for awhile because my current kernel are sucks,
So i got a new phone which is Samsung J5, im developing kernel for the J5 for my
my own use, Not for sharing others because it will hurt my reputation XD,
and from that i learned a lot more about developing a good kernel,
Im goin to update the kernel using newer source, and im able to fix the
MTP and random reboot issues which is make me happy, its going out soon,
So if you guys still usin this device, you can use the new kernel that i will
post soon.
5/7/2017
For those of you who had a booting problem,
the V4.1.1 probably will fix it
3/7/2017
Finally, an actual stable one,
Rebuilt from the newest source from scratch
-V4.1-revived-version
22/6/2017
The new one probably the most stable,
been testing it for a week and so
far no problem or frequent reboot happen or
something like that
7/5/2017
Finally!!! Camera are fixed guys!
MTP functionality is still unconfirmed
Sorry for the long wait ^-^
1/1/2017
I decided to release a maintenance release update cause i found
that the device crash many times throughout all my kernel
and i decided to think about it more seriously and i had made
a maintenance release for you and report me if there still
crash happening on the device
27/12/2016
I wanted to release the kernel a little bit early cause
busy with new year celebration.The latest one is Thunderoar Kernel v2.6
Happy New Year to all of you!! sorry if i'm being too early
18/12/2016
I'm going get the new kernel ready next month which is the new year.
I'm gonna support SM-T113 too next year and continue with it *if it's working*
I'm going to need tester for sm-t113 next year
1/11/2016
enable the usb fast charge using the kernel adiutor app!
Camera are working on the stock kernel but not mine...
The source code for the camera is not exist in the source...
If you wanna connect your device to pc make sure the
USB fast charge is off,if it isn't disabled,you won't able to
manage file on your device through pc
XDA:DevDB Information
Thunderoar Kernel, Kernel for the Samsung Galaxy Tab 3 7.0
Contributors
@Thunderoar
Credits:
@Osm0sis-For the Anykernel2
Github
Kernel source
Version Information
Status: Stable
Current Stable Version: Angel Beats! || 5.0
Stable Release Date: 2017-12-24
Created 2016-12-26
Last Updated 2017-12-24
Press the "Thanks" button if you appreciate my work or if i helped you
Can you Make Sm-T210 dernek werewolf v003 kernel add overclock And your tweaks??
gr9nole said:
Can you Make Sm-T210 dernek werewolf v003 kernel add overclock And your tweaks??
Click to expand...
Click to collapse
Ok,but what android you are currently using right now?Kitkat or JB?
Changelog:
V5.0 Codenamed "Angel Beats!" (2017-12-24)
+Kernel upstream version 3.10.17->3.10.108
+Gpu update
+Fix MTP
+CPU Frequency change 200MHz upto 1.5GHz
+Entropy Update
+Multicore Power Saving
+CPU Boost
+Arch Power
+Power Suspend
+Quickwakeup
+Read-ahead set to 512kB
+Adaptive Low Memory Killer
+Software CRC control
+Gentle Fair Sleepers
+Fsync On/Off
+Built from scratch and fixed random reboot
+Dynamic Fsync
-Removed Obselete Cpu Governor
-Removed Obselete I/O Scheduler
-Removed UKSM and use normal KSM
V4.1.1 update (2017-7-5)
+Fix some devices not booting
+New CPU Hotplug: AutoSMP
V4.1 update (2017-7-3)
+Just another update for stability
V4.0 update (2017-7-3)
+No more Reboot or similar effect - Tested
+Linux kernel downgraded into 3.10.32 temporarily because rebuilt from scratch
+Auto cpu boost on input without predefined frequency
+UKSM(Ultra Kernel Samepage Merging)
+LZ4 Z-RAM - Faster Memory
+Asynchronous Fsync -Faster storage management
+USB Fast Charge are back
-Removed cpu governor: OndemandX, Zzmoove, Scary *Temporary*
V3.4 update (2017-6-22)
+The most stable kernel that i've ever built
+Linux Kernel 3.10.44
+No more frequent reboot or similar effect
+Bug fixes
V3.3 update (2017-6-17)
+Linux Kernel 3.10.40
+Properly fix the bug that mentioned on the v3.2 update and lower the risk of instability
+A bunch of cpu governor
*Hotplug
*Lionheart
*Reworked version of intelliactive
*Ondemandplus
*OndemandX
*Hyper
*Zzmoove
*Nightmare
*Wheatley
*Badass
*Scary
*All of them are properly functioning and tuned for compatibility
and if you want the hotplug features, use the hotplug governor provided
+Bug Fixes
-Adaptive cpu governor removed parmanently
V3.2 update (2017-6-8)
+Update: Linux Kernel 3.10.37
+Update: Using the latest Anykernel2 zip
+Update: Minimum frequency change into 254MHz and also voltage change for nice battery lasting
+Update: cpu-boost set to 765MHz and running for 3 seconds when touch detected
+Update: Set CFQ as default scheduler
+Fix: Bug that cause long running app either in the background or foreground to freeze/lagging/reboot etc.
+Fix: Bug that cause the device to reboot randomly
+Fix: Bug that cause the graphic being not working/properly lagging or some sort
+Fix: Bug that cause the device to reboot or freeze when standby
+Fix: Bug that causing the kernel to working improperly/lagging/rebooting/unstable after a while
+Bug fixes
V3.1 update (2017-5-7)
+CPU Frequency minimum change -> 384MHz
+Fix Frequency bug stuck at 768MHz
+Faster charging
V3.0 update (2017-5-7)
+Kernel version updated from 3.10.22 - > 3.10.26
+Using updated Anykernel zip
+Frequency: changed into 1600Mhz and minimum is 386Mhz
+GPU: function updated
+Deferred Timer working as it is
+LZ4 compression
+"Schedule workqueues on awake CPUs to save power" are back
+Remove conflict between Samsung touch booster and my CPU-Boost so you can actually set the amount you want
for boost
+Sync threshold for cpu-boost are not set
+I/O scheduler default to deadline
+Fsync are on by default
+TCP Congestion Algorithm set default to Westwood which is the fastest for network usage
+Additional TCP Congestion Algorithm are added
+Additional tweak to make the kernel faster
+Camera Fix!!!
+MTP Function (unconfirmed)
+A whole lot of bug fixes
-sprdemand governor
-Fastcharge (for now)
V2.8 update (2017-1-31)
+Frequency: changed into 1660Mhz and minimum is 580Mhz
+Cpu-boost: defined stable values
+Less OS tearing
+Fastcharge updated
+Audio functionality improved
+Voltage: change for low-power use
+Many bug fixes
+Selinux: updated
-Automatic Cpu Hotplug: removed for better stability but with little to no battery drainage but you still can deactivate the cores through Kernel Adiutor
-Sprdemand: removed
V2.6.1-MR1 update (2017-1-1)
*Note:This is maintenance release therefore some features may temporarily unavailable
Add: cpu-boost currently disabled but provided as an option
Add: voltage change
Add: frequency change from 386Mhz to 1600Mhz for more stable
Fix: serious bug that causing switching off mobile data make it freeze/crash
Fix: bug that causing the device freezing/crash throughout all my kernel update release
V2.6 a.k.a *Almost* New Year Update (2016-12-27)
+Kernel version updated from 3.10.17 - > 3.10.22
+Frequency step changed to make it more stable
+GPU overclocked upto 640Mhz
+CPU-Boost re'added,improve stability and Frequency set
*"Schedule work queues on awake CPU to save power"
\_disabled by default because instability issue on booting but kept as an option in Kernel Adiutor
\_Its pretty unstable so i didn't recommend you to use it
+This updates focus heavily on stabilily,sound,memory and networking
+Zswap Added
+Zbud Added
*Swappiness level turn down to 10 to avoid using swap as much as possible but use it when low memory
\_The reason of me to use swap as low as possible is RAM is faster than swap,so use that for better
\_application loading.
*No more SOD(Sleep Of DEATH) OR FOD(Freezing Of DEATH) as it happen many times on my older kernel
\_but it *may* happen
+Voltage increased for more stability
+Dynamic Sync re'added and enabled by default
+Fsync turn off by default
+Overall entropy tweak
+SIO,SIO-Plus scheduler re'added
-Row scheduler
V2.0 a.k.a November update (2016-11-1)
+1650 mhz re'added and step changes
+Fsync on/off re'added
+Row scheduler re'added
+Intelliactive Governor re'added
+BLX(Battery life extender) added
+Adaptive Governor added
+Lagfree Governor added
+Schedule work queues on awake CPU to save power
+Fixed unused frequencies on kernel adiutor
+Improved networking capability
+Improved memory management
+Improved security so you don't have to install antivirus
+Improved web browsing
+Improved device battery
-Dynamic sync have to go for now
-cpu boost removed because of compability issue
V1.7 (2016-10-15)
+Deferred Timer
+Cpu boost frequency set
+Updated Dynamic sync control
+Interactive governor updated and used as default governor
+HUGE bug fixes (better than before)
-Fsync On/Off (parmanent maybe)
V1.3 (2016-09-25)
+NVS hibernate driver
+LZ4 compression support
+Snappy compression library (v3)
+Many bug fixes(It is very smooth,surprisingly)
+Frequency changed to 1650MHz
-intelliactive governor (for now)
-row i/o scheduler (for now)
-sioplus i/o scheduler (for now)
V1 (2016-09-20)
+Initial Release
How about for the SM-T211 on KKat ?
,
,
Be great too...
Sent from my SM-T211 using Tapatalk
andynroid said:
How about for the SM-T211 on KKat ?
,
,
Be great too...
Sent from my SM-T211 using Tapatalk
Click to expand...
Click to collapse
yea,i can do that,but instead of asking me to do it,the others had made custom kernel for your phone..why wont u use them?
Thunderoar said:
yea,i can do that,but instead of asking me to do it,the others had made custom kernel for your phone..why wont u use them?
Click to expand...
Click to collapse
The only kernel available for the SM-T211 is Werewolf and it is not a good build besides the OP has vanished...
Sent from my SM-T211 using Tapatalk
The only kernel available for the SM-T211 is Werewolf and it is not a good build besides the OP has vanished...
Sent from my SM-T211 using Tapatalk
Click to expand...
Click to collapse
I see..but are you willing to be the tester if i finally made it? bcause, i dont have that kind of device
Thunderoar said:
I see..but are you willing to be the tester if i finally made it? bcause, i dont have that kind of device
Click to expand...
Click to collapse
Sure why not.....[emoji3]
Sent from my SM-T211 using Tapatalk
andynroid said:
Sure why not.....[emoji3]
Sent from my SM-T211 using Tapatalk
Click to expand...
Click to collapse
ok,good,gonna start downloading the source code soon[emoji4]
Thunderoar said:
Ok,but what android you are currently using right now?Kitkat or JB?
Click to expand...
Click to collapse
jb 4.1.2 android please
sample werewolf kernel v003 good kernel add your tweaks oc ... thanks
note:I have tab 3 sm-t210 I now test kernel
ı using jb
Thunderous thank you very much for your kernel
Thunderoar I too lite sm t116, thanks for the kernel, a big request, you can port the cyanogen (11,12,13) or lilipop, I can help in testing and finding a donor for porting.
natttroll said:
Thunderoar I too lite sm t116, thanks for the kernel, a big request, you can port the cyanogen (11,12,13) or lilipop, I can help in testing and finding a donor for porting.
Click to expand...
Click to collapse
yeah,i'm currently compiling and test it,but it's to much build error while compiling it..
sorry not updating the kernel for so long,currently busy building marshmallow for our device
it's been 3/4 days i'm working on the rom,it's omnirom btw not cyanogenmod,omnirom is a little bit easier
Thunderoar said:
yeah,i'm currently compiling and test it,but it's to much build error while compiling it..
sorry not updating the kernel for so long,currently busy building marshmallow for our device
it's been 3/4 days i'm working on the rom,it's omnirom btw not cyanogenmod,omnirom is a little bit easier
Click to expand...
Click to collapse
:good: Thunderoar, i will be waiting for your rom. :fingers-crossed:
Thunderoar your kernel works well, bug kamera.Good luck for omnirom, rom super. (I'm sorry Do not know English, google translate translation).
Thunderoar :good: ,updated kernel i will test.
SM-T116NU
Can this kernel be used for SM-T116NU?
fleomikn said:
Can this kernel be used for SM-T116NU?
Click to expand...
Click to collapse
Yes you can,and just wanna let you know,this kernel I test is with device sm-t116nu which I use everyday,so all gonna be fine
Thunderoar said:
Yes you can,and just wanna let you know,this kernel I test is with device sm-t116nu which I use everyday,so all gonna be fine
Click to expand...
Click to collapse
Oh. It's sound great. I'll flash it righ now. Many thanks!
One question more
Same device with you, can you help me, its about "xposed framework"
fleomikn said:
Oh. It's sound great. I'll flash it righ now. Many thanks!
One question more
Same device with you, can you help me, its about "xposed framework"
Click to expand...
Click to collapse
Ok, what can I help?