[Sprint/Virgin Mobile Moto G 2015
XT1548 CDMA Variants
Stock 6.0.1 Marshmallow ROM
Unmodified & TWRP Flashable]
I have not fully tested this ROM. Testers would be great to ensure proper functionality and to report any potential bugs in my flashable zip. I have installed the ROM tentatively to ensure successful booting.
{Note: This ROM is confirmed to work on Sprint's 4G/LTE Network, & both the Virgin Mobile USA & Virgin Mobile Data Done Right Networks}
______________________________________
Android Version: 6.0.1 Marshmallow
System Version: 24.212.13.en.Sprint
Build No. MCIS24.107-82-13
Security Patch Level: January 1, 2017
Build Date: Monday, January 16, 2017
Baseband Version:
MSM8916_2020632.44.03.21.54R
OSPREY_SPRINT_CUST
Kernel Version: 3.10.49-g5d515c0
______________________________________
DISCLAIMER: As always, flashing any ROM -- stock or custom -- is done at your own discretion, prerogative & inherent risk. If you blame me for bricking your device I'll laugh at you whilst spitting my Redman Chew into an old rusted Folgers Coffee can.
The following download link is for the most recent build of Stock 6.0.1 Marshmallow for the Sprint compatible xt1548 Moto G 2015 variants. Again, this ROM is a pure stock build. It has not been pre-rooted, debloated, etc. Although minimal, the baked in bloatware apps are included. This ROM is in TWRP flashable zip format. You will need an unlocked bootloader and a current version of TWRP custom recovery for Osprey. (Preferably, @squid2's TWRP v3.0.2-r5 should be installed) Guys be sure and hit the Thanks button on Squid2's thread (link below) for his hard work and developments skills on these great TWRP builds for our Moto G3 devices.
INSTRUCTIONS:
NOTE: In the event that you have never updated your Partition Index, Modem and Radio Firmware to 6.0.1 Marshmallow, it is highly recommended you flash my Updater.zip from the below link prior to proceeding further. I cannot say with certainty that it is absolutely necessary, I strongly recommend doing so for optimal performance and improved network signal strength/speed. Once your Partition Index has been updated, there is no reverting it back to its prior configuration. That's not a negative thing, but I wanted to articulate it nonetheless. This also does not mean that you can't downgrade your stock ROM at a later time. (Just avoid flashing gpt.bin in the firmware package to which you wish to downgrade. Also avoid bootloader.img when downgrading stock firmware.)
1. Download the 6.0.1 ROM from the link below and place the zip file on either an external micro SD card, or on the internal storage of your device;
2. Boot into TWRP recovery by first powering your device OFF. Then, hold the Power & Volume Down buttons simultaneously for 3 - 5 seconds. Release both buttons when the Bootloader Menu appears on screen. Use the Volume Up or Down buttons to navigate to the "RECOVERY MODE" option, then press Power to select. Should you need guidance or detailed instructions on installing TWRP custom recovery, refer to the below link for @squid2's TWRP thread, which provides a comprehensive tutorial on installing TWRP on your device, as well as a Downloads Tab, where all of @squid2's TWRP builds can be found.
3. Make a full NANDROID backup in TWRP before proceeding with this installation;
4. Perform a full wipe (Dalvik/ART, System, Data & Cache. (Be mindful to not wipe Internal Storage in the event your flashable zip is stored there). Select Reboot then Recovery. (Sometimes necessary for /data to properly mount after wiping);
5. In your TWRP Main Menu, select INSTALL, navigate to the location of your flashable zip, select it, and swipe to commence with the install. TWRP will flash your device with the stock boot image and stock Android OS. Wait until the TWRP progress window indicates "Done";
6. Wipe Dalvik/ART & Cache
7. Select Reboot, then System
8. Allow up to 12 minutes for the initial boot. Subsequent boots will occur much quicker;
9. Should you want superuser access on this stock ROM, download @Chainfire's SuperSU v2.79 from the below link. Download the flashable zip version from the OP & flash it via TWRP subsequent to successfully flashing the stock ROM. Be sure to hit the Thanks button on @Chainfire's thread for his superb work in keeping us Android enthusiasts rooted.
10. Eat Right, Live Wrong, & Prosper.
DOWNLOAD LINKS:
Stock 6.0.1 ROM [MCIS24.107-82-13]
https://drive.google.com/file/d/0B7-zQU1VihD3MzZNdktHYk5aUUU/view?usp=drivesdk
@squid2's TWRP Moto G 2015 Thread:
https://forum.xda-developers.com/2015-moto-g/orig-development/twrp-twrp-moto-g-2015-t3170537
@Chainfire's SuperSU v2.79 Stable Release: apk and flashable zip formats
https://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
Partition/Firmware Updater .zip: https://drive.google.com/file/d/0B7-zQU1VihD3Q25hblVGbEdNN1E/view?usp=drivesdk
Sent from my MotoG3 using XDA Forums PRO
Can you please make such for xt1557 dual sim indian version? and if you don't plz make an updater script for twrp for xt1557 (moto g3 turbo)
Sorry guys on the ROM link.. I have several requests for access on my Gmail. I have temporarily disabled sharing because I'm editing my binary updater script a little more. It'll be back online very shortly.
Uploading the edited files now. Be back up in about half an hour.
Sent from my MotoG3 using XDA Forums PRO
amritmalviya said:
Can you please make such for xt1557 dual sim indian version? and if you don't plz make an updater script for twrp for xt1557 (moto g3 turbo)
Click to expand...
Click to collapse
Making a TWRP flashable zip ROM for your device would be tough since I don't own that variant. If you can get a system folder and stock boot image ready for a zip, I could probably lend a hand on the updater script in META-INF.
Sent from my MotoG3 using XDA Forums PRO
Sir pls make for other Moto g osprey versions too...
Sent from my MotoG3 using Tapatalk
RijuSarkar said:
Sir pls make for other Moto g osprey versions too...
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
What variant of Osprey do you have?
Sent from my MotoG3 using XDA Forums PRO
XT1550...indian dual SIM variant
Sent from my MotoG3 using Tapatalk
RijuSarkar said:
XT1550...indian dual SIM variant
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
I'll need a Nandroid of the system partition. Specifically, I'll need the system.ext4.win file that is generated by TWRP during the Nandroid backup. I can get the other files
Sent from my MotoG3 using XDA Forums PRO
Sir plz make one
Sent from my MotoG3 using Tapatalk
RijuSarkar said:
Sir plz make one
Click to expand...
Click to collapse
I can't make a proper Nandroid via TWRP because I don't own that variant of the Moto G3. If you or one of your acquaintances who owns your variant can send me a Nandroid backup of the /system partition (system.ext4.win), I can provide the stock boot.img and the META-INF with Updater Script.
Ok sir...I am trying...
Sent from my MotoG3 using Tapatalk
---------- Post added at 06:39 AM ---------- Previous post was at 06:38 AM ----------
I had that variant but had no nandroid back up
Sent from my MotoG3 using Tapatalk
RijuSarkar said:
Ok sir...I am trying...
Sent from my MotoG3 using Tapatalk
---------- Post added at 06:39 AM ---------- Previous post was at 06:38 AM ----------
I had that variant but had no nandroid back up
Click to expand...
Click to collapse
Ok
MotoJunkie01 said:
Ok
Click to expand...
Click to collapse
Plz take a look at this thread ...this is an optimised version of Moto g xt 1550 osprey..but with April patch...can you make one from it?
https://forum.xda-developers.com/20...m-stock-motorola-6-0-1-rom-optimized-t3355938
Sent from my MotoG3 using Tapatalk
RijuSarkar said:
Plz take a look at this thread ...this is an optimised version of Moto g xt 1550 osprey..but with April patch...can you make one from it?
https://forum.xda-developers.com/20...m-stock-motorola-6-0-1-rom-optimized-t3355938
Click to expand...
Click to collapse
Yes I should be able to. Are you wanting mostly stock & unmodified?
MotoJunkie01 said:
Yes I should be able to. Are you wanting mostly stock & unmodified?
Click to expand...
Click to collapse
Yes...mostly stock..with latest security patches...
Sent from my MotoG3 using Tapatalk
RijuSarkar said:
Yes...mostly stock..with latest security patches...
Click to expand...
Click to collapse
I will see what I can do. The ROM will need a couple of testers who own the device. I'll get a copy of the original Toolchain source code to try and modify the modified build back to mostly stock. The January 1, 2017 security patches can be implemented in as well.
You will find many Moto g XT 1550 tester here sir...don't worry...will it be a volte enabled or not?
Sent from my MotoG3 using Tapatalk
RijuSarkar said:
You will find many Moto g XT 1550 tester here sir...don't worry...will it be a volte enabled or not?
Click to expand...
Click to collapse
If you want. I can leave that as an option for the end user, and provide an optional zip & patch for Volte support.
Okay sir...and may I able to update this rom when new security patch is available?
Sent from my MotoG3 using Tapatalk
Related
Moto G Hybrid Kernel
What is a Hybrid?
Hybrid kernel means the core although still has the 3.4.0 kernel label, it has incorporated many advanced features available only on Linux 3.8+ and beyond. I have backported many of those advanced features for Linux 3.4, hence the name hybrid!
Here's the flashable zip file
m - mainline with stock CPU/GPU frequencies
Stable Release:
KK 4.4.2 http://faux.romhost.me/falcon_umts/kk44/
JB 4.3 http://faux.romhost.me/falcon_umts/jb43/
Beta Release:
http://faux.romhost.me/falcon_umts/beta
Change Log:
KK 4.4.2 http://faux.romhost.me/falcon_umts/kk44/changelog.txt
JB 4.3 http://faux.romhost.me/falcon_umts/jb43/changelog.txt
Source here:
https://github.com/faux123/moto_g
JB http://faux.romhost.me/falcon_umts/private_moto_g-jb43_exp.zip
Flash via Fastboot instructions:
1. Connect device to PC via USB
2. extract xxx.zip and go to extracted folder
3. adb push xxx.zip /sdcard/.
4. adb reboot bootloader
5. fastboot flash boot boot.img
6. fastboot reboot
7. use root explorer or ES explorer /w root, extract xxx.zip
8. copy modules/ folder to /system/lib/modules/
Join my Kernel G+ Community for latest greatest betas here:
https://plus.google.com/u/0/communities/100266563627035551841
Fauxclock recommended settings: https://plus.google.com/109078966818501160423/posts/P9WNDuFsTXd
reserved 2
reserved 3
It's compatible for KitKat? Because we don't have a backup boot.img for KitKat rom...
joel_sinbad said:
It's compatible for KitKat? Because we don't have a backup boot.img for KitKat rom...
Click to expand...
Click to collapse
No, I've asked Moto already and they said they are in Xmas shutdown and the source for KK won't be available until next year. You can back up your boot.img and give it a shot, if not then restore.
You specify US GSM, are there issues with other variants?
lost101 said:
You specify US GSM, are there issues with other variants?
Click to expand...
Click to collapse
No idea. I only tested with us gsm because that's what I have. You can try on other variants and give feedback here since I can't tested them myself. Make sure you backup first
Sent from my XT1034 using Tapatalk
Installed via CWM Recovery. Working fine on XT1032. Thanks so much for this faux123. Merry Christmas
Wow of all people never expect you to make a kernel for us!!! Very happy. I'm going to flash back to 4.3 just to run this!!! Thank you
Sent from my XT1034 using XDA Premium 4 mobile app
Amazing Faux. Amazing. Thank you.
Thanks Faux ...
Sent from xda app
Work fine on french gsm
Thanks :victory:
Faux, can you say if the Moto G hardware would ever support doubletap2wake or sweep2wake?
Works perfectly on a German retail XT1032
Thanks!
I wonder if we can correct the blueish screen with this kernel. Then we'd have a perfect screen.
can you add this to your github?
What a Christmas gift... Ty so much faux
Sent from my XT1032 using xda app-developers app
I can't believe I am using a faux kernel like I did and do on my nexus devices on the moto g. It really starts to get fun! And I thought I downgraded....
The way I see it, this device is dev friendly with the cheap price tag. Its a "might as well" device. Unlockable boot loader on a moto device is where its at. I've had many moto devices and the hardware is always well put together.
Moto Gee :-¢
Steel Droid - Now for the G2!
This is my first attempt at a ROM for the G2. I can build one from source, but wanted to try my hand at modding a stock OTA.
This ROM is based on the Verizon 24a OTA. That being said, you must be using a 24a bootstack for this to work.
This is a blended ROM. Kind of like what some of you might remember from my Droid 3 days. Mods, additions, bloat removal, and eventual theming.
I DO need some help with deodexing and odexing. If you want to lend some knowledge/files, PM me!
Changelog:
v1.0.9 (BETA)
* Removed SOME bloat from /system/app/
* Added xdabbeb's 3.1.0 Camera mod
* Added in my custom ad-blocking hosts file
* Optimized and compressed all audio files (ogg)
* USB autorun ISO removed
Downloads:
Code:
[URL="http://www.androidfilehost.com/?fid=23487008491962403"]v1.0.9[/URL]
md5: bbe5d29517a42e965fcad362c6bbcd98
Installation:
1: Flash from recovery (TWRP 2.7.0.0 is what I use)
2: Reboot
3: Profit!
Credits:
Google
LG
Xdabbeb's
MicroMod77
others....
Big fan of your work with my previous phone Droid 3. Glad to see u here!
Sent from my VS980 4G using XDA Free mobile app
chevycam94 said:
This is my first attempt at a ROM for the G2. I can build one from source, but wanted to try my hand at modding a stock OTA.
Theres a chance this won't even boot. I'm at work, only have my phone, and can't test until late evening. Please report issues!
Change log:
v1.0.3
* Removed bloat
* Updated apps to current versions
* Included Xdabbeb's v3.1.0 camera mod
* Optimized all OGG audio files
* Xposed framework preinstalled plus:
- Advanced Reboot Menu
- GravityBox
- Network Speed Indicator
* Removed usbautorun.iso
* Mobile Hotspot provisioning mod
There's more I can't remember at the moment.....
Downloads:
v1.0.3
I will update the OP as I get breaks.
Credits:
Google
LG
Xdabbeb's
MicroMod77
others....
Click to expand...
Click to collapse
Guess I will ask it, as I did not see it in the OP...24A??
---------- Post added at 02:17 PM ---------- Previous post was at 02:12 PM ----------
TPS_Reports said:
Guess I will ask it, as I did not see it in the OP...24A??
Click to expand...
Click to collapse
Nevermind...download file name says it all.
Sent from my LG-VS980 using Tapatalk
Anyone having a issue downloading?
Sent from my VS980 4G using Tapatalk
Got to 60% then FAILED !!!
worked for me
Mine worked but was slow. About to flash
Sent from my VS980 4G using Tapatalk
let me know if it works mine is still downloading
Chevy thanks for putting out a ROM for the G2. I'm glad to see you here. I haven't run something from you since the original droid!
wouldnt download
kenbrownstone said:
Mine worked but was slow. About to flash
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
I too was able to download the file but was incredibly slow...will flash tonight when I get home from work. Will report any issues.
Download just worked fine for me...
MrC
JDROIDS said:
Chevy thanks for putting out a ROM for the G2. I'm glad to see you here. I haven't run something from you since the original droid!
Click to expand...
Click to collapse
You were around in the Stone Age? lol Yeah, Im still going at it! Actually I think Im the ONLY active developer for the Droid 1 still. lol IM NUMBER ONE (of one)! lol
To all those having trouble downloading:
This is the only place I have right now that will let me upload a file over 500MB. I will eventually be getting my own website/hosting, but thats once I get my finances in place with enough extra to afford it. Im close, but not quite where I feel comfortable with it yet.
AFH just upgraded their severs, so things will be mirroring for a while until the system is back up to date. Sorry for it being slow, but its all I have right now
If this boots, there's a high chance I will begin to include Dorimanx's KK kernels in my releases. His kernel, combined with his STweaks app, is basically unbeatable. Wish it played nice with xdabbeb's ROM, but oh well. Maybe in time...
chevycam94 said:
If this boots, there's a high chance I will begin to include Dorimanx's KK kernels in my releases. His kernel, combined with his STweaks app, is basically unbeatable. Wish it played nice with xdabbeb's ROM, but oh well. Maybe in time...
Click to expand...
Click to collapse
No one is willing to send dorimanx the boot image. Everyone keeps asking for it to be fixed in his thread, and all he asked for was the kernel xdabbeb used, so he can loom at what he changed, and make the changes.
Send him the kernel
Sent from my Vs980 running Fr4nk1yn's Rebooted 24a
Unable to flash using TWRP 2.7.0.0. It said in red "Failed". MD5 matches so I don't think it's a bad download. Maybe bad upload? Maybe needs another version of TWRP or CWM or Philz to flash?
HueyT said:
Unable to flash using TWRP 2.7.0.0. It said in red "Failed". MD5 matches so I don't think it's a bad download. Maybe bad upload? Maybe needs another version of TWRP or CWM or Philz to flash?
Click to expand...
Click to collapse
Go to mounts in Twrp and uncheck "system" should flash after that.
Mindrocket said:
Go to mounts in Twrp and uncheck "system" should flash after that.
Click to expand...
Click to collapse
Nope, didn't work. Still "Failed" in red even with "System" unmounted in TWRP 2.7.0.0.
I just did a quick test. LGSetupWizard has stopped. Cant get a logcat, so I will have to dig deeper, unless any of you have some quick suggestions...
yes failed for me as well right away lol
*** I AM NOT RESPONSIBLE IF YOU MESS UP YOUR PHONE OR LOSE ANY DATA!! BACK IT UP BEFORE HAND!! ***
LiquidSmooth KitKat for Droid X
Important Notes:
I have not tested Phone/Data functionality, as I no longer have service. So I have no idea if it works.
This is a work in progress. I don't have much time to work on this ROM, so please be patient between builds.
This is based off of LiquidSmooth's source, mixed with Quarx's and m.ksy/Aaahh's source.
Instructions for INITIAL INSTALL of LS KK on Droid X:
Download latest ROM and gapps.
If you're on a custom ROM already (CM, MIUI, LiquidICS) goto STEP 6. Otherwise, download Droid2RecoveryBootstrap_CWM5.0.2.0.apk, Framaroot.apk, and twrp_2.8_kitkat_dx.zip to your DX.
On phone: Settings->Applications(Enable Unknown sources)->Development->Enable USB Debugging.
Install Framaroot.apk, launch it and select "Gimli", reboot you're phone.
Install Droid2RecoveryBootstrap_CWM5.0.2.0.apk, launch it, select "Bootstrap Recovery", grant Superuser access and reboot phone.
Reboot phone into CWM Recovery or if you on stock firmware launch Droid X Bootstrapper and press "Reboot Recovery".
In CWM choose wipe data/factory reset (this will completely delete all your data on phone except sdcard), then install zip from sdcard and select twrp_cm11_dx.zip.
Reboot system.
(It's touch) Recovery -> Team Win Recovery.
In TWRP choose Install and select ROM, then swipe.
Once installed, click Reboot System and let it fully boot up.
Reboot into Recovery again.
In TWRP choose Install and select gapps, then swipe.
Once installed, click Reboot System.
Instructions for UPGRADING LS KK for Droid X:
Reboot into Recovery.
Select "Backup".
Check all boxes that apply, then swipe.
Once finished, go back to the main menu.
Select "Wipe" -> "Advanced Wipe".
Check all boxes that apply EXCEPT "sdcard", then swipe.
Return to main menu again.
Select "Install", then select the latest version of the ROM on your sdcard, then swipe.
Once installed, click Reboot System and let it fully boot up.
Reboot into Recovery again.
Select "Install", then select the latest version of the gapps on your sdcard, then swipe.
Select "Reboot System". Enjoy!
Bugs:
Liquid's Kernel Tweaker does not work. Use Aero Kernel Control.
You tell me...
DOWNLOADS
ROM: LS-KK-v3.2-2015-01-28-shadow.zip
MD5: 10c02b31508e9857c70e881db3e93509
GAPPS: 8-7_GApps_Minimal_4.4.4_DX.zip
MD5: 74a22b22496c88d371b5890adbe0b036
Extras:
Droid2RecoveryBootstrap_CWM5.0.2.0.apkFramaroot.apktwrp_2.8_kitkat_dx.zip
XDA:DevDB Information
LiquidSmooth KitKat, ROM for the Motorola Droid X
Contributors
roeblatt3, m.ksy, Aaahh, Quarx, CyanogenMod Team, LiquidSmooth Team
HUGE Thanks to Quarx, m.ksy, and Aaahh for their brilliant work to keep these Droids kicking!!
This wouldn't have been possible without them!
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 2.6.x
ROM Firmware Required: TWRP 2.8.0.0
Based On: LiquidSmooth, CyanogenMod
Version Information
Status: Beta
Current Beta Version: 3.2-2015-01-28
Beta Release Date: 2015-01-28
Created 2015-01-28
Last Updated 2015-01-28
Reserved...
Excellent, a multi ROM safestrap sure would be nice now
Sent from my DROIDX using Tapatalk
Couple of things i noticed.
If coming from Cm11, Wipe everything except SD card (System, Data, Android Secure and Caches...) It keeped trying to call verizon to activate otherwise.
Just Install Rom, boot rom, then Reboot recovery and install GApps, I could not get past language selection if I installed GApps at same time.
see Attached
Damn... I'm kicking my self now for not taking the old x with me tonight
sd_shadow said:
Couple of things i noticed.
If coming from Cm11, Wipe everything except SD card (System, Data, Android Secure and Caches...) It keeped trying to call verizon to activate otherwise.
Just Install Rom, boot rom, then Reboot recovery and install GApps, I could not get past language selection if I installed GApps at same time.
Click to expand...
Click to collapse
Thanks. Instructions updated.
I can't believe that I didn't see this. I'll flash tomorrow sometime!
---------- Post added at 06:06 PM ---------- Previous post was at 05:20 PM ----------
Bobcus Leper said:
I can't believe that I didn't see this. I'll flash tomorrow sometime!
Click to expand...
Click to collapse
Forget that! I have already flashed and the responsiveness is incredible!
Bobcus Leper said:
I can't believe that I didn't see this. I'll flash tomorrow sometime!
---------- Post added at 06:06 PM ---------- Previous post was at 05:20 PM ----------
Forget that! I have already flashed and the responsiveness is incredible!
Click to expand...
Click to collapse
Yeah this rom is damn sweet. I've been having problems with many random lockups and reboots though. But I am keeping this on the x. I am not really a fan of cm11... only cause it doesnt have the level of customization that roms like liquidsmooth have
This ROM is great, very smooth and decent battery life.
Sent from my DROIDX using Tapatalk
What kernels are supported?
kingtiger01 said:
What kernels are supported?
Click to expand...
Click to collapse
Only the one included with the rom
Very nice work @roeblatt. Thank you.
Sent from my HTC One_M8 using Tapatalk
sd_shadow said:
Only the one included with the rom
Click to expand...
Click to collapse
While, that is true. Its CM11 based, and i need to add kernel/module functionality. - So i need to know limitations.
(2.6.32.9-AeroKernel) So i need sources to the kernel provided and information/log on the kernel if there is no other kernels for Shadow(CDMA) with CM11 support.
--------------
Also,
OTG(HOST Mode) is broken.
Is there a nightly/beta's availible? (or atleast the repo. for the shadow)
kingtiger01 said:
While, that is true. Its CM11 based, and i need to add kernel/module functionality. - So i need to know limitations.
(2.6.32.9-AeroKernel) So i need sources to the kernel provided and information/log on the kernel if there is no other kernels for Shadow(CDMA) with CM11 support.
--------------
Also,
OTG(HOST Mode) is broken.
Is there a nightly/beta's availible? (or atleast the repo. for the shadow)
Click to expand...
Click to collapse
This is the only kernel available at the moment until the 3.0 kernel is ported from Quarx's LP build
Sent from my ATRIX HD using XDA Free mobile app
kingtiger01 said:
While, that is true. Its CM11 based, and i need to add kernel/module functionality. - So i need to know limitations.
(2.6.32.9-AeroKernel) So i need sources to the kernel provided and information/log on the kernel if there is no other kernels for Shadow(CDMA) with CM11 support.
Click to expand...
Click to collapse
see https://github.com/MotoDX-CM11/android
and
local_manifest.xml.txt
Also,
OTG(HOST Mode) is broken.
Is there a nightly/beta's availible? (or atleast the repo. for the shadow)
Click to expand...
Click to collapse
have you tried otg with cm11?
---------- Post added at 08:22 AM ---------- Previous post was at 08:16 AM ----------
and mksy's build instructions
https://github.com/MotoDX-CM11/android/blob/cm-11.0/README.mkdn
@roeblatt3 Nice work!! just now noticed this! Perhaps I should try porting AOKP since I already have the source downloaded @Aaahh what's the progress on the true safe strap with multi-ROM support?
Oggie7797 said:
@roeblatt3 Nice work!! just now noticed this! Perhaps I should try porting AOKP since I already have the source downloaded @Aaahh what's the progress on the true safe strap with multi-ROM support?
Click to expand...
Click to collapse
I'm not even working on it... "
If i have time i will
its really just syncing multiboot and building it
you then take the ramdisk and move it to safestrap folder
Aaahh said:
I'm not even working on it... "
If i have time i will
its really just syncing multiboot and building it
you then take the ramdisk and move it to safestrap folder
Click to expand...
Click to collapse
How about the ramdisk-recovery that you had me and @Bobcus Leper test awhile back?? We had it to where we could setup another ROM slots but only for other cm11's (including liquid now) personally I like safe strap and ROM slots more so than multiboot..but hey, I'll take what I can get xD
Tap'd from my Unicorn covered Bionic
You need a better naming process @Aaahh
Tap'd from my Unicorn covered Bionic
Caution: Make a backup of EFS Partition using TWRP Alka and keep it safe.
Latest Build (1008) (Flashable):
HTML:
https://drive.google.com/open?id=0B38onre9C_D0RUlVeWF2RXp1UXc
Old Build :
HTML:
https://drive.google.com/open?id=0B38onre9C_D0YXU2YV9iazJ4MDg
Latest Build (1008) (TWRP Backup):
HTML:
https://drive.google.com/open?id=0B38onre9C_D0X3VyQjM3TWhCUXc
NX Radios :
HTML:
https://drive.google.com/open?id=0B38onre9C_D0UHdJcjJ1RTFDLVU
Qualcomm AOSP Radios :
HTML:
https://drive.google.com/open?id=0B38onre9C_D0RUlVeWF2RXp1UXc
AOSP Radio :https://drive.google.com/open?id=0B38onre9C_D0SWtJMktzbVVVcmc
Gapps : https://drive.google.com/open?id=0B38onre9C_D0NjllM3BFTUltX3c
VoLTE Fix : http://forum.xda-developers.com/redmi-note-3/how-to/fix-volte-marshmallow-miui-t3451791
TWRP Backup of All Partitions except EFS and DATA (Restore with TWRP Alka)- https://drive.google.com/open?id=0B38onre9C_D0MUxhZzlWTmw3MXM
Working Features:
Marshmallow Adaptable SDCard
Fingerprint
Both Sim Slots
VoLTE
Native Marshmallow Multi Window
Procedure:
1. Flash ROM.
2. Reboot to recovery again.
3. Flash Gapps, Xposed, SuperSu.
4. Reboot to System.
5. Check if both SIM and VoLTE working.
6. If VoLTE is not working, reboot to recovery and flash VoLTE fix firmware from above link.
7. Reboot, delete APN, create it manually.
8. Enjoy.
Note 1- If anyone is still facing problem of VoLTE not working, just disable the second sim and try to make a call with Jio Sim. When call goes through, enable the second sim again.
Note 2- Sometimes VoLTE is working fine but HD text does not appears . Just try dialing 1977 on Jio SIM, if call goes through, VoLTE is fine.
Credit- hyxy @ miui Chinese forum and Raaj52 for VoLTE fix [/URL]
Thumbnails
Screenshots
Reserved
Awesome !! Will try thanks !!
Sent from my Redmi Note 3 using Tapatalk
Thanks:laugh:
Reserved for reviews
Sorry dude but there is a thread for this rom already: http://forum.xda-developers.com/red...rom-aosp-6-0-qualcomm-factory-rom-mm-t3446772
Old news
donalberto17 said:
Sorry dude but there is a thread for this rom already: http://forum.xda-developers.com/red...rom-aosp-6-0-qualcomm-factory-rom-mm-t3446772
Old news
Click to expand...
Click to collapse
this is a new build i guess look at the andriod security patch date
ajitnaikak said:
this is a new build i guess look at the andriod security patch date
---------- Post added at 07:25 AM ---------- Previous post was at 07:24 AM ----------
link is expired make a new one
Click to expand...
Click to collapse
The kernel was built on may 5 like the old version
Edit - This rom causes brick. I couldn't use this rom because it's full of error messages and whatnot. Sim never worked.
After that it stopped me from restoring aosp5.1. Phone used to switch off after mi logo. I had to flash firmware from official cm13 thread and then everything went back to normal. I could restore my twrp of aosp5.1
Those who are planning to flash it.. Be warned. Have a pill for headache.
1emrys1 said:
Even so. It has a new security patch so it will be considered an upgrade. Let the thread exist. Don't get riled up.
I hope someone can mirror it on afh or Google drive.
Click to expand...
Click to collapse
Will make a Google drive mirror. Anyways, its a new build. I was facing com.phone crash when using both Sims, which has been fixed.
Download Links updated.
VoLTE not working, tested
Rom is smooth
arunmcops said:
Will make a Google drive mirror. Anyways, its a new build. I was facing com.phone crash when using both Sims, which has been fixed.
Download Links updated.
Click to expand...
Click to collapse
can you please test if you can disable a single sim on this rom?
Aadeep said:
VoLTE not working, tested
Rom is smooth
Click to expand...
Click to collapse
Have you flashed Firmware zip and then deleted APN ? Kindly do that and manually recreate APN.
Quick report. Did not try this ROM yet but flashed firmware over other AOSP 6.0.1 rom.
4G + 3G is working. (tested with "Network Cell Info Lite")
Showing UMTS + LTE connection.
BUT fingerprint is NOT working with this firmware.
Deactivation SIM is NOT working with this firmware.
VoLTE not working with firmware (only)
this rom is TWRP flashable, other topic has fastboot rom, after flashing it you have to unlock bootloader, etc
+ TWRP backup which has problems. so this rom has a reason to be
arunmcops said:
Have you flashed Firmware zip and then deleted APN ? Kindly do that and manually recreate APN.
Click to expand...
Click to collapse
Yes, still not working
First of all give proper credits !
http://www.miui.com/thread-5450963-1-1.html
Secondly the rom is almost the same
Com.android.phone FC still there
And volte not working !
Continue in the same earlier thread as there is nothing now in this rom
Sent from my Redmi Note 3 using Redmi Note 3 Forums
manhar2108 said:
First of all give proper credits !
http://www.miui.com/thread-5450963-1-1.html
Secondly the rom is almost the same
Com.android.phone FC still there
And volte not working !
Continue in the same earlier thread as there is nothing now in this rom
Sent from my Redmi Note 3 using Redmi Note 3 Forums
Click to expand...
Click to collapse
com.android.phone was giving FC on my sim with Naptha build which has been fixed in this build.
I can flash this rom with gapps and cm13 firmware, right? No chance of bootloader locking or bricking...?
Sent from my kenzo using Tapatalk
Can the radio of MM stock 6.9.9 be separated from the firmware?
With the radio alone, it should enable the 4G+3G
Kenzo/Kate Firmware by @reemar
The newest firmware there is, made by me:
- it came from latest version of global beta by miui.
- extracted firmware and create zip u to flash at Recovery!
Q/A:
It is VoLTE working on this firmware?
It should work now, but i can't test It becouse my provider has no VoLTE. Try and tell me!
Any risk of relocking bootloader flashing this firmware?
Absolutely not. NO emmc_appsboot.mbn = NO BOOTLOADER F****ups
aka - it will not relock your bootloader
Why i need this firmware?/What it is good for?
If you want to flash a CM13/14/14.1/AOSP N rom, you need to flash this updated firmware first.
it FIXED and improves Signal, Gyroscope, Accelerometer, Magnetic sensors in Redmi Note 3
For what reason i have to choose this firmware instead of another one?
If you have flashed another firmware, you probably have those issues: battery percentage not working, camera autofocus not working, low signal strenght. If not, stay on your firmware.
BUT, this firmware is the great and latest, so u probably should ONLY flash that Firmware
Where are you getting it from?
I'm extracting the firmware from official beta/developers release of xiaomi miui.
i'm taking the firmware only and give it to you to be use, on any rom u want!
How to install:
-reboot to recovery
-wipe whatever u want, (i wipe dalvik and cache cos i'm dirty )
-mount everything u can tick such as firmware and system
-install firmware
-afterwards factory reset is recommended although not must cos we R dirty
-install your rom/gapps/kernel whatever
-reboot and say thanks!!
-Enjoy
Dictionary:
Dirty = dirty flash, not wipe everything, aka 'flash over' cos we lazy to backup and restore stuff's
KENZO = the official global version of Redmi note 3 SD650 and its 150mm height
KATE = the Special Edition version of Redmi note 3 SD650 and its 152mm height
SD = snapdragon motherboard, come on guys, u suppose to know that..
Downloads: Version: 7.3.9 - (09/03/2017)
Kenzo: Mod Edit: Link Removed
Kate: https://forum.xda-developers.com/redmi-note-3/development/firmware-los-13-14-14-1-aosp-m-n-t3557513
*Kate firmware will be maintain by @[email protected]
NEWS - 10/03/17:
reemar said:
UPDATE-UPDATE-UPDATE:
7.3.9 Firmware is out, not many changes but the latest, enjoy!
Click to expand...
Click to collapse
Thank you so much!
I'm on ZCX TWRP and running RR 6.0.1 and i have MIUI backup 6.0.1 (All partitions) can flashing this firmware before restoring backup work?
reemar said:
Kenzo MIUI FIRMWARE 7.2.16:
The newest firmware. i made it:
it came from 7.2.16 version of global beta by miui - the latest
(16/02/2017)
NO emmc_appsboot.mbn = NO BOOTLOADER F****ups
aka - it will not relock your bootloader
here is the download link:
https://www.multiup.org/download/f0...b432/Kenzo_MIUI_FIRMWARE_7.2.16_by_REEMAR.zip
Click to expand...
Click to collapse
Are You made it? Is Just copying some files in your zip from the fastboot images make you developer of this frameware?
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 10:32 AM ---------- Previous post was at 10:28 AM ----------
And i think there is no need of make a new theard every week
Sent from my Redmi Note 3 using Tapatalk
amar2cool99 said:
Are You made it? Is Just copying some files in your zip from the fastboot images make you developer of this frameware?
Click to expand...
Click to collapse
How can he make it.... Offcourse he copied it frm fastboot file
But I thinks he deserves thanks for the same... He is sharing... He is caring.
A lill bit of respect towards him shud b appreciated
Is there any improvement with signals?? I'm on lineage os.
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 10:51 AM ---------- Previous post was at 10:41 AM ----------
You should upload it on Google drive or Androidhost, all your links are full of ad's, download not working on any links.
Sent from my Redmi Note 3 using Tapatalk
Can anyone explain how to make a flashable firmware like this? I want to create my own for my Kate.
dn* said:
Can anyone explain how to make a flashable firmware like this? I want to create my own for my Kate.
Click to expand...
Click to collapse
+1
Here are so many kate-owners...and no one makes firmware-files...this is really sad!
dn* said:
Can anyone explain how to make a flashable firmware like this? I want to create my own for my Kate.
Click to expand...
Click to collapse
Download the latest fastboot version of the latest firmware. Compare to see what's in these flashable firmwares and check the Images directory of the fastboot firmware. Copy them over to the flashable zip. That's probably the easiest way.
dn* said:
Can anyone explain how to make a flashable firmware like this? I want to create my own for my Kate.
Click to expand...
Click to collapse
Maybe the easiest way to do that by downloading custom miui rom like multirom, xiaomi.eu, epic, etc as ur wish then, extract only the firmware-update and meta inf, inside meta inf look for updater-script and edit it with any kind of text based app editor like notepad++ or else, or the meta inf you can take from the strix cm14 firmware, or psyman, etc. Finally repack it again, using rar, 7zip, or else, with .zip format. And enjoy.
Sent from my Redmi Note 3 using Tapatalk
It's possible to flash this firmware on my rom aicp 7.1.1?? Reblock bootloader it???
MIUI beta 7.2.16 firmware is identical to beta 7.2.9 firmware. Those who have already flashed 7.2.9 don't need to flash 7.2.16.
amar2cool99 said:
Are You made it? Is Just copying some files in your zip from the fastboot images make you developer of this frameware?
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 10:32 AM ---------- Previous post was at 10:28 AM ----------
And i think there is no need of make a new theard every week
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
The copying of files = made it, download the 1.5gb,extract files, someone Need to do it
And this time it was me
Adv_Sushil_Tater said:
Is there any improvement with signals?? I'm on lineage os.
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 10:51 AM ---------- Previous post was at 10:41 AM ----------
You should upload it on Google drive or Androidhost, all your links are full of ad's, download not working on any links.
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
This server contain uptobox and some other top quality links,
I'll share the links from within in 26 hrs
I'm on I can flash this firmware 13.1 MM CM without reinstalling the whole rom?
LeoYL said:
MIUI beta 7.2.16 firmware is identical to beta 7.2.9 firmware. Those who have already flashed 7.2.9 don't need to flash 7.2.16.
Click to expand...
Click to collapse
How to find same firmware version.
Sorry for question because I don't know.
cool&hot said:
How to find same firmware version.
Sorry for question because I don't know.
Click to expand...
Click to collapse
Verify MD5 of each file, or CRC32. You can easily verify CRC32 using WinRAR.
LeoYL said:
Verify MD5 of each file, or CRC32. You can easily verify CRC32 using WinRAR.
Click to expand...
Click to collapse
Thanks for sharing
WhatsApp can't installed using this firmware
Thanks for your time. I dirty flashed over lineage os 14.1 and it works perfectly.
JaRi1976 said:
WhatsApp can't installed using this firmware
Click to expand...
Click to collapse
What? Whatsapp runs here without any problem...something other maybe wrong?