Related
Hellow!
This kernel works only on stock and some custom KItKat 4.4.2 TouchWiz ROMs for Samsung Galaxy S4 mini I9190/I9195/I9192 variants!
Features:
Based on last official kernel source for GT-I9195 (used SilviuMik's branch)
Synced with E370KKTU2BOD2 kernel source (KK 4.4.4 kernel for SHV-E370K variant of Galaxy S4 Mini LTE (announced only for Korea))
CPU Overclock (OC): up to 2052MHz
CPU Underclock (UC) down to 81MHz
GPU Overclock up to 627MHz
CPU Voltage Control (VC)
Hotplug thread infrastructure
Faux123's Intelliplug
MyFluxi MSM-hotplug new
Alucard-hotplug new
Lazy-hotplug new
Gamma control
Faux123's GPL Sound Control 2.1
Sweep2Sleep
Fast charge
Upgraded taus88 to taus113 algorithm for entropy generator
Added and realy used frandom (fast random number generator)
Krait optimized strcmp and memcmp
Motorola MSM memcopy enhancements (memutils) to improve of the memory subsystem performance
CPU-boost new
Quickwakeup new
KSM (Kernel SamePage Merging)
Timer slack controller
Speedup late resume patch for faster wakeup of the device
F2FS support
NTFS support with full read/write access
init.d support
Updated exFAT module to v1.2.12
LZ4 compressor for zSwap new
TCP-cong: westwood, vegas, reno and etc.new
Set SELinux always into "Permissive mode"
Pre-installed bosybox (placed in /sbin folder)
Compiled with Linaro GCC 4.9.4-2015.06 Toolchain
Additional Governors:
Impulse
[*]Intelliminmax
[*]Intelliactive
[*]Lionheart
[*]Ondemandplus
[*]Smartmax
[*]Preservative
[*]Wheatly
[*]Intellidemand new
[*]Alugard new
[*]Slim new
Additional I/O Schedulers:
FIOPS (Fair Input/Output Per Second)
[*]SIO (Simple I/O)
Credits:
@arco68
@Christopher83
@F4k
@junkyde
@SilviuMik
@GrarakInstallation instructions:
for ODIN:
1. Extract XXXX-ALX-x.x.x.md5 from XXXX-ALX-x.x.x.tar.zip
2. Flash with ODIN XXXX-ALX-x.x.x.md5 file
for CWM:
1. Copy XXXX-ALX-x.x.x.zip (without tar) to your sdcard
2. Reboot into CWM recovery
3. Choose "Install zip from sdcard"
4. Select XXXX-ALX-x.x.x.zip kernel and confirm installation.
Download:
Link1
Link2
XDA:DevDB Information
Custom TouchWiz KK4.4.2 Kernel for I9190/I9195/I9192, Kernel for the Samsung Galaxy S 4 Mini
Contributors
alexax66
Source Code: https://github.com/alexax66/KitKat_kernel_samsung_msm8930-common
Kernel Special Features: CPU and GPU Overclocking, CPU Underclocking, CPU Voltage Control, Advanced CPU hotplugs, Gamma control, Faux123's Sound Control, Sweep2Sleep, Additional Governors and I/O Schedulers, KSM, F2FS, NTFS, Timer Slack Controller, Fast charge
Version Information
Status: Stable
Current Stable Version: ALX-0.1.2
Stable Release Date: 2015-11-15
Current Beta Version: ALX-0.1.3
Beta Release Date: 2015-12-30
Created 2015-08-15
Last Updated 2015-11-18
How to use kernel features
- for CPU, GPU, Hotplug and Gamma Control tunings use Kernel Auditor by Grarak
- for Faux123's Sound Control tuning use FauxSound Audio/Sound Control
- set of some features for switching through a parameters of the build.prop:
For all kernel version:
- to enable Sweep2Sleep:
Code:
ro.config.sweep2sleep=true
- to enable init.d support add in build.prop:
Code:
ro.config.sysinit=true
Only for ALX-0.1.0 and later:
- to enable KSM:
Code:
ro.config.ksm=true
Only for ALX-0.1.1 and later:
-to enable Adaptive LMK:
Code:
ro.config.adaptive_lmk=true
Read about how adjust LowMemoryKiller with management of not killable processesin
Only for ALX-0.1.2 and later:
Use only one of this hotplugs!
-to set Alugard-hotplug as default:
Code:
ro.config.alucardplug=true
-to set MyFluxi MSM-hotplug as default:
Code:
ro.config.msm-hotplug=true
-to set Intelli-hotplug as default:
Code:
ro.config.intelliplug=true
-to set Lazy-hotplug as default:
Code:
ro.config.lazyplug=true
Chaneglog:
ALX-0.1.0
ALX-0.1.1
ALX-0.1.2-Release
ALX-0.1.3
Full Changelog
Kernel tested by me over month, all :good:
---------- Post added at 09:23 AM ---------- Previous post was at 09:10 AM ----------
One thing, gamma control work only in device control app, and after reboot is set by default, maybe in future is will be fixed
can i use with ploiki's rom?
00ehsan00 said:
can i use with ploiki's rom?
Click to expand...
Click to collapse
I not test this kernel in ploiki's rom, but i think that it work without any problems.
OOMMGG!!! Finallyyyyyy!!! I can't believe it!!!
THANK YOUUUU! :victory: :good:
o0chtm0o said:
OOMMGG!!! Finallyyyyyy!!! I can't believe it!!!
THANK YOUUUU! :victory: :good:
Click to expand...
Click to collapse
Yep)))
Some summer day i tired waiting kernel from f4k and ask my friend alexax66, he say ok no problem, next day i tested first version
P.S.
By the way, he not use stock, he use CM, and he did it for us just because he good man :good:
denon480 said:
Yep)))
Some summer day i tired waiting kernel from f4k and ask my friend alexax66, he say ok no problem, next day i tested first version
Click to expand...
Click to collapse
Wow! It's INCREDIBLE!! I have no words. I hope it's not the first and last work, I hope OP can continue with this project. It's amazing! I was waiting for this since loooooong time ago, losing any hopes
o0chtm0o said:
Wow! It's INCREDIBLE!! I hace no words. I hope it's not the first and last work, I tope OP can continúe with this project. It's amazing! I was waiting forma this since loooooong time loosing any hopes
Click to expand...
Click to collapse
not first and not last)))
Soon, OTG and maybe ext4 support
it's stable and there is no battery drain with overclock and underclock.
it's fully work with ploiki's rom too.
do u have plane to add otg and bln support?
and another question is that how can i use sweep2sleep?
thanks again for kernel.:good:
00ehsan00 said:
it's stable and there is no battery drain with overclock and underclock.
it's fully work with ploiki's rom too.
do u have plane to add otg and bln support?
and another question is that how can i use sweep2sleep?
thanks again for kernel.:good:
Click to expand...
Click to collapse
We test some new patches bln, dosent work
add in build.prop
ro.config.sweep2sleep=true
reboot
swipe on the bottom screen from left to right, is lock the phone
Tested new kernel with memory patches.
Just for info, work on kernel dont stop
Very very good job... I appreciate your work with this kernel ... I have only one question if is possible, what are the best governor and scheduler to use for a balance between performance and battery?
Sent from my GT-I9195 using xda premium
petrevirgil said:
Very very good job... I appreciate your work with this kernel ... I have only one question if is possible, what are the best governor and scheduler to use for a balance between performance and battery?
Sent from my GT-I9195 using xda premium
Click to expand...
Click to collapse
I personally like ondemand/cfq I find it makes things that tiny bit more responsive like 1080p video recording and scrolling thru my Google Keep widget. Ondemand for me gives some of the best battery.
who have tested this kernel with the rom "N5 four mini" ?????
better than silviu for battery ???
Will this work on I9192?
Loulou-13 said:
who have tested this kernel with the rom "N5 four mini" ?????
better than silviu for battery ???
Click to expand...
Click to collapse
I'm currently using this with N5 four mini rom, works so awesome, incredible battery life, there is just one problem though, private mode does not work with this kernel, but they said its because of the rom not fully compatible with the kernel., i don't know if this works fine with s6 port 5.1, havent tried yet.
Can I use with S6 Mini Port Rom
alexax66
sajid0786 said:
Can I use with S6 Mini Port Rom
alexax66
Click to expand...
Click to collapse
Yes, you can use this variant
Hi all,
some of you know me from the other OnePlus (One and Two) or Samsung devices areas, where I provide my kernels already for more than two years to OnePlus One, OnePlus Two, Galaxy S5, S3 and Note 10.1 users for all sort of platforms (Samsung, Cyanogenmod, Omnirom etc.)
Please note:
I am not heading to have as many features as possible implemented, this is not my design goal. If you are more into that, move on to other kernels. If you are searching for a good mix of improvements and new functions while not sacrificing stability, you are welcome here (see below the history section for more info).
Compatibility
Important: This kernel is only meant to be compatible with official OnePlus OOS and nothing else.
So when the kernel does not run on custom rom XYZ, do not even bother me with it or ask hundred times in the thread for compatibility.
I could not care less about it !!
Important notes
]When using new anykernel concept Boeffla-Kernel: Flash stock kernel of rom first !
Make sure you flash the correct kernel version, depending on whether you really use Oxygen OS or a different OS !!!
Also note: You have to use Boeffla-Config app which I provide on my homepage to tweak the kernel. 3rd party apps will not be able to unleash the full power of the kernel.
Saying that, the Boeffla-Sound app in Play Store is not designed to work on the OPX, neither was it developed by me, hence it will never work on the OPX ever. Boeffla-Config is the way to go here !!!
Support
First read the FAQ section on the Homepage !!!
Click here to learn about all possible kernel settings in the config app (quite outdated, as it is focused on S3 still).
Click here to learn about using the config app (quite outdated, as it is focused on S3 still).
I will refuse to give support if you do any undervolting and experience freezes or hot reboots.
I will also not provide any support if you do not use Boeffla-Config app to tweak the kernel, other 3rd party tweaking apps are known (and intended) to cause issues.
I will refuse to give support if you have xposed framework installed and reporting any kind of weird issues. My opinion to xposed it quite clear: too powerful for >90% of the users that just mess up their system with it.
Otherwise, you can get in touch with me via the support e-mail address: [email protected]
Please provide kernel version, rom version, a detailed issue description and ideally supporting screenshots or log files.
Change logs
(you can also access them directly in Boeffla-Config V2 by pressing menu and selecting "change log...")
Change log for Oxygen OS 3.x.x kernel - Click here
Change log for Oxygen OS 2.x.x kernel - Click here
Features
Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
Full integration with Boeffla-Config V2 (you need at least version 2.2.29 or higher !!!) configuration app (get it from http://www.boeffla.de) to configure all kernel settings
Additional governors: zzmoove, intelliactive, intellidemand, intellimm, wheatley, smartmax, smartmax_eps, slim, intellimm, pegasusq, nightmare, lionheart, impulse, ondemandplus, yankactive
Zzmoove supporting native hotplugging profiles
Additional schedulers: fiops, bfq, sio, tripndroid, zen
Many Hotplug tweak profiles (Default, Optimized, 1 core max, 2 cores max, 3 cores max, 2 cores min, 3 cores min, 4 cores min, 2 cores exact, 3 cores exact)
Notification LED control (fading, speed, brightness)
Boeffla-Sound engine (Headphones volume configurable currently)
True dynamic FSync (activated if screen on, deactived if screen off), configurable
Touch boost frequency and duration configurable, touch boost switch
CPU Overclocking up to 2.54 GHz
CPU Voltages interface for undervolting/overvolting
GPU idle frequency 27 Mhz added
GPU governor selection support with fixed simple_ondemand0
Show GPU frequency usage per frequency in Boeffla-Config
KCAL color control driver
Swipe2wake gestures
Swipe2sleep gestures
Haptic feedback control
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
System Tweaks predefined supported
Kernel logger (dmesg) configurable
Charge rates for AC charger and USB charging separately configurable (set charge rate to 0 to have stock charge logic back)
Charge information display support via Boeffla-Config V2 app
CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
NFS support (module)
exFat opensource support
NTFS support (module) - read-only
XBox support (module)
OTG-Ethernet support (module)
TCP Congestion changed to Westwood
Multiple additional TCP congestion algorithms available
Swap supported
init.d support (in /system/etc/init.d - set correct permissions!)
Default entropies increased
Automatic EFS backup
Full support for mpdecision for best compatibility and smoothness (no min cpu frequency reset, use Boeffla-Config to configure min frequencies only)
Integrated full busybox 1.24.2 (own compilation)
Kernel initialisation log file (with history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Presets supported in Boeffla-Config by kernel (Extreme power, power, normal, battery friendly and battery saving)
Kexec hardboot patch for multirom usage (not supported, not fully working)
Google gcc 4.8 toolchain used for best stability
Always using latest Oxygen OS Initramfs
Always based on latest Oxygen OS kernel sources (https://github.com/OnePlusOSS/android_kernel_oneplus_msm8974)
Note: I do NOT upstream the kernel to higher Linux kernel versions anymore as this usually has zero benefit but likely introduces new issues + is a waste of effort in the end
Download
For all information and downloads (stable AND testing versions), visit the Boeffla-Kernel homepage:
www.boeffla.de
History and design targets
Basically I created my first Boeffla-Kernel in 2012 as there was no kernel for the Samsung Galaxy S3 around that had exactly the mix of functionalities that I wanted. I wanted to have full flexibility in undervolting and charge rates for instance, but did not like the sharpness and/or brightness tweaks many kernels have implemented as per default.
Hence, I began to create my own kernel after a while, adding all the features I like. This is the result of my work, which in the end I decided to share with you. I hope you like it as much as I do.
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. Also it does not aim to have the broadest feature set available everywhere.
It aims more for a good mix of all, not sacrificing stability and functionality in the end.
And - most important: It aims to stay quite close to stock !!!
These design targets are also valid for the OnePlus kernel here!!!
This said, I will definitely NEVER implement:
things I do personally not need
things I do not like
things that are in any way dangerous
anything which is highly experimental
f2fs - it is known to cause various issues and compatibility problems
custom hotplugging algorithms
a CAF based kernel
anything that requires upstreaming of kernel parts to a higher kernel major version
So do not even ask for it if it falls into the listed categories. Everything else I am happy to check and decide.
And: I do not really care about benchmark numbers, they say almost nothing as long as something is not completely wrong. Important for me is the feel-good factor.
I am also not interested in gaming at all, so never expect a gamer kernel. It will just not happen...
Compatibility
To reiterate it again: Flash the correct kernel depending on whether you are using Oxygen OS or another rom !!!
Configuration of the kernel
To tweak and configure the kernel, manually load and install the app "Boeffla-Config V2" from the downloads section on www.boeffla.de.
You need at least version 2.2.29 or higher for the OnePlus X Boeffla Kernels.
Donation
If you like my work, feel free to donate: Donation-Link
If you donate at least 2,49 EUR (to be in line with the donation app prices on Google Play store), you will receive a personal donation code which unlocks some nice little comfort functions in Boeffla-Config V2 on top.
Source code
All sources can be found in my Github repository: http://github.com/andip71
Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* ZaneZam
* Grarak
* Yank555
* Hardcore
* Chainfire
* AndreiLux
* Netarchy
* Gokhanmoral
* Simone201
* Mialwe
* Entropy512
* Faux
* Harunjo
* FranciscoFranco
* Ak
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work !!!
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in your custom recovery and safely store your personal data before you flash a new kernel.
Cheers and enjoy
Andi
Latest change logs:
http://kernel.boeffla.de/oneplusx/boeffla-kernel-oos/oos3xx/changelog.htm
*** You want my support? Then stick to my rules ***
Guys, I am receiving more and more completely useless support requests in different threads. Useless because people provide nothing to be able to help, not even the minimal possible information they could give.
Hence, I will now remind anyone again on the support guide lines stated here:
http://boeffla.de/index.php/support/support
Also you need to ensure you follow the installation guide lines incl. trouble-shooting stated here:
http://boeffla.de/index.php/support/installation-how-to
And to cut a long story short: If you do not at least provide what I request in the support guide lines, I will IGNORE YOUR REQUESTS IN FUTURE.
Straight and simple. I have enough of people wasting my time just because they are too lazy to write details.
Period.
Also as a reminder:
you use xposed? -> no support, everything is your own issue
you use a custom rom and not the official stock or CM one? -> good luck, you are on your own
you undervolt or overclock? -> have fun, but without my support
Sorry, this might sound harsh (and it is meant to sound harsh), but you cannot imagine about how crappy support requests can be. Stating something does not work is just not enough.
Please consider that!!!
Andi
Great to have you here
Welcome Andi !!! Gonna flash your kernel as soon as I get my OPX .... Will make profiles for it too
Welcome again !!!
Naman Bhalla said:
Welcome Andi !!! Gonna flash your kernel as soon as I get my OPX .... Will make profiles for it too
Welcome again !!!
Click to expand...
Click to collapse
Hehe, nice. I see you everywhere, isn't it?
Andi
sorry if i sound like a noob but if i have bluspark kernel already flashed, can i just flash this ontop of it? or do i have to restore a backup (of the opx before i flashed bluspark) and then flash this kernel? thanks in advance
Thanks a ton. Is CM support planned?
ihs0201 said:
sorry if i sound like a noob but if i have bluspark kernel already flashed, can i just flash this ontop of it? or do i have to restore a backup (of the opx before i flashed bluspark) and then flash this kernel? thanks in advance
Click to expand...
Click to collapse
You can flash on top of it as Boeffla kernel works on a different principle (Sorry.. I forgot what it is called... LOL... Maybe Andi can tell) .... But yeah, if issues come, flash stock and then the Boeffla (shouldn't happen though )
#HappyFlashing
Lord Boeffla said:
Hehe, nice. I see you everywhere, isn't it?
Andi
Click to expand...
Click to collapse
hehe !! I try to help the community as much as possible...
---------- Post added at 12:04 AM ---------- Previous post was at 12:01 AM ----------
RJDTWO said:
Thanks a ton. Is CM support planned?
Click to expand...
Click to collapse
I don't wanna post on behalf of Andi... But if you have been following Andi , he usually builds for CM once official builds roll out with everything working... For now, there is no official build, though almost everything is working now...
But Boeffla is in initial phase of development for OPX so I feel lord will focus more on Oos...
In short, don't expect a CM version till official nightlies start.
Naman Bhalla said:
You can flash on top of it as Boeffla kernel works on a different principle (Sorry.. I forgot what it is called... LOL... Maybe Andi can tell) .... But yeah, if issues come, flash stock and then the Boeffla (shouldn't happen though )
#HappyFlashing
Click to expand...
Click to collapse
Thanks for the quick reply
Nice to see boeffla kernel here. Was waiting for this after seeing a thread on oneplus forum. Is there a version for cm12/13 as well?
Edit: Never mind
Finally, I can't wait to flash it. You're the best, Andi, I'm proud I can say I designed your avatar, hahaha.
well i tried to install, and it gave me the error : your device is onyx. this zip is for ONE
i did install this zip: boeffla-kernel-4.0-beta1-OOS2xx-OnePlusX.recovery.zip
can anyone help/has the same problem
ihs0201 said:
well i tried to install, and it gave me the error : your device is onyx. this zip is for ONE
i did install this zip: boeffla-kernel-4.0-beta1-OOS2xx-OnePlusX.recovery.zip
can anyone help/has the same problem
Click to expand...
Click to collapse
Which recovery did you use ? As can clearly be seen, this issue is from Updater-script .... So either you can delete that line from the script or best is to use another twrp
Naman Bhalla said:
Which recovery did you use ? As can clearly be seen, this issue is from Updater-script .... So either you can delete that line from the script or best is to use another twrp
Click to expand...
Click to collapse
it is version twrp v.2.8.7.0, but i will try and update and then get back to you
ihs0201 said:
well i tried to install, and it gave me the error : your device is onyx. this zip is for ONE
i did install this zip: boeffla-kernel-4.0-beta1-OOS2xx-OnePlusX.recovery.zip
can anyone help/has the same problem
Click to expand...
Click to collapse
You downloaded the wrong kernel ( you downloaded the OnePlus one variant) so don't flash it as it might brick your device.
Scroll a bit more down in the Web page till you find OnePlus X.
P.S. The website can be a bit confusing for newer members, so here you go.
http://boeffla.df-kunde.de/oneplusx/boeffla-kernel-oos/oos2xx_download/Test/
Cheers.
dagger said:
You downloaded the wrong kernel ( you downloaded the OnePlus one variant) so don't flash it as it might brick your device.
Scroll a bit more down in the Web page till you find OnePlus X.
P.S. The website can be a bit confusing for newer members, so here you go.
http://boeffla.df-kunde.de/oneplusx/boeffla-kernel-oos/oos2xx_download/Test/
Cheers.
Click to expand...
Click to collapse
no it was the opx variant, as the filename showed opx when i flashed it. thanks anyway, and yeah the website is a bit jumbled
but the problem was an old twrp version. updated it and the kernel flashed no problem . BTW i like ur icon pack, might try it
Can someone explain the difference between this kernel and blu-spark to us common people?
What do you take into consideration when deciding which one to use?
Hi Andi,
Good to have Boeffla kernel again!
The real deal just came to opx. Thanks, bro! Hope opx gets official cm so you can provide support for cm too, as I cannot live without cm.
** Note: This kernel is end-of-life and will no more be maintained. There will be no LineageOS 15.1 or newer kernel be available anymore **
Hi all,
some of you know me from the other OnePlus (One and Two) or Samsung devices areas, where I provide my kernels already for more than two years to OnePlus One, OnePlus Two, Galaxy S5, S3 and Note 10.1 users for all sort of platforms (Samsung, Cyanogenmod, Omnirom etc.)
Now I own a OnePlus X device and decided to port my kernels also to this device.
Please note:
I am not heading to have as many features as possible implemented, this is not my design goal. If you are more into that, move on to other kernels. If you are searching for a good mix of improvements and new functions while not sacrificing stability, you are welcome here (see below the history section for more info).
Compatibility
Important: This kernel is only meant to be compatible with official Cyanogenmod and nothing else.
So when the kernel does not run on custom rom XYZ, do not even bother me with it or ask hundred times in the thread for compatibility.
I could not care less about it !!
Important notes
When using new anykernel concept Boeffla-Kernel: Flash stock kernel of rom first !
Make sure you flash the correct kernel version, depending on whether you really use CM or a different OS !!!
Also note: You have to use Boeffla-Config app which I provide on my homepage to tweak the kernel. 3rd party apps will not be able to unleash the full power of the kernel.
Support
First read the FAQ section on the Homepage !!!
Click here to learn about all possible kernel settings in the config app (quite outdated, as it is focused on S3 still).
Click here to learn about using the config app (quite outdated, as it is focused on S3 still).
I will refuse to give support if you do any undervolting and experience freezes or hot reboots.
I will also not provide any support if you do not use Boeffla-Config app to tweak the kernel, other 3rd party tweaking apps are known (and intended) to cause issues.
I will refuse to give support if you have xposed framework installed and reporting any kind of weird issues. My opinion to xposed it quite clear: too powerful for >90% of the users that just mess up their system with it.
Otherwise, you can get in touch with me via the support e-mail address: [email protected]
Please provide kernel version, rom version, a detailed issue description and ideally supporting screenshots or log files.
Change logs
(you can also access them directly in Boeffla-Config V2 by pressing menu and selecting "change log...")
Change log for CM13 kernel - Click here
Features
Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
Full integration with Boeffla-Config V2 (you need at least version 2.2.42 or higher !!!) configuration app (get it from http://www.boeffla.de) to configure all kernel settings
Additional governors: zzmoove, intelliactive, intellidemand, intellimm, wheatley, smartmax, smartmax_eps, slim, intellimm, pegasusq, nightmare, lionheart, impulse, ondemandplus, yankactive
Zzmoove supporting native hotplugging profiles
Additional schedulers: fiops, bfq, sio, tripndroid, zen
Many Hotplug tweak profiles (Default, Optimized, 1 core max, 2 cores max, 3 cores max, 2 cores min, 3 cores min, 4 cores min, 2 cores exact, 3 cores exact)
Notification LED control (fading, speed, brightness)
Boeffla-Sound engine (Headphones volume configurable)
True dynamic FSync (activated if screen on, deactived if screen off), configurable
Touch boost frequency and duration configurable, touch boost switch
Additional swipe2wake gestures
Additional swipe2sleep gestures
CPU Overclocking up to 2,57 GHz
CPU Voltages interface for undervolting/overvolting
GPU idle frequency 27 Mhz added
GPU governor selection support with fixed simple_ondemand
Show GPU frequency usage per frequency in Boeffla-Config
KCAL color control driver
Swipe2wake gestures
Swipe2sleep gestures
Boeffla generic wakelock blocker V1.1.0 (documentation)
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
System Tweaks predefined supported
Kernel logger (dmesg) configurable
Charge rates for AC charger and USB charging separately configurable (set charge rate to 0 to have stock charge logic back)
CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
NFS support (module)
exFat opensource support
NTFS support (module) - read-only
XBox support (module)
OTG-Ethernet support (module)
TCP Congestion changed to Westwood
Multiple additional TCP congestion algorithms available
Swap supported
init.d support (in /system/etc/init.d - set correct permissions!)
Default entropies increased
Automatic EFS backup
Full support for mpdecision for best compatibility and smoothness (no min cpu frequency reset, use Boeffla-Config to configure min frequencies only)
Integrated full busybox 1.24.2 (own compilation)
Kernel initialisation log file (with history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Presets supported in Boeffla-Config by kernel (Extreme power, power, normal, battery friendly and battery saving)
Updated wifi drivers
Kexec hardboot patch for multirom usage (not supported, not fully working)
Google gcc 4.9 toolchain used for best stability
Always using latest CM Initramfs
Always based on latest CM kernel sources (https://github.com/CyanogenMod/android_kernel_oneplus_onyx)
Note: I do NOT upstream the kernel to higher Linux kernel versions anymore as this usually has zero benefit but likely introduces new issues + is a waste of effort in the end
Download
For all information and downloads (stable AND testing versions), visit the Boeffla-Kernel homepage:
www.boeffla.de
History and design targets
Basically I created my first Boeffla-Kernel in 2012 as there was no kernel for the Samsung Galaxy S3 around that had exactly the mix of functionalities that I wanted. I wanted to have full flexibility in undervolting and charge rates for instance, but did not like the sharpness and/or brightness tweaks many kernels have implemented as per default.
Hence, I began to create my own kernel after a while, adding all the features I like. This is the result of my work, which in the end I decided to share with you. I hope you like it as much as I do.
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. Also it does not aim to have the broadest feature set available everywhere.
It aims more for a good mix of all, not sacrificing stability and functionality in the end.
And - most important: It aims to stay quite close to stock !!!
These design targets are also valid for the OnePlus kernel here!!!
This said, I will definitely NEVER implement:
things I do personally not need
things I do not like
things that are in any way dangerous
anything which is highly experimental
f2fs - it is known to cause various issues and compatibility problems
custom hotplugging algorithms
a CAF based kernel
anything that requires upstreaming of kernel parts to a higher kernel major version
So do not even ask for it if it falls into the listed categories. Everything else I am happy to check and decide.
And: I do not really care about benchmark numbers, they say almost nothing as long as something is not completely wrong. Important for me is the feel-good factor.
I am also not interested in gaming at all, so never expect a gamer kernel. It will just not happen...
Compatibility
To reiterate it again: Flash the correct kernel depending on whether you are using CM or another rom !!!
Configuration of the kernel
To tweak and configure the kernel, manually load and install the app "Boeffla-Config V2" from the downloads section on www.boeffla.de.
You need at least version 2.2.42 or higher for the OnePlus X Boeffla Kernels.
Donation
If you like my work, feel free to donate: Donation-Link
If you donate at least 2,49 EUR (to be in line with the donation app prices on Google Play store), you will receive a personal donation code which unlocks some nice little comfort functions in Boeffla-Config V2 on top.
Source code
All sources can be found in my Github repository: http://github.com/andip71
Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* ZaneZam
* Grarak
* Yank555
* Hardcore
* Chainfire
* AndreiLux
* Netarchy
* Gokhanmoral
* Simone201
* Mialwe
* Entropy512
* Faux
* Harunjo
* FranciscoFranco
* Ak
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work !!!
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in your custom recovery and safely store your personal data before you flash a new kernel.
Cheers and enjoy
Andi
Latest change logs:
CM14
http://kernel.boeffla.de/oneplusx/boeffla-kernel-cm/cm14.0/changelog.htm
CM13
http://kernel.boeffla.de/oneplusx/boeffla-kernel-cm/cm13.0/changelog.htm
Configuration and profile thread
http://forum.xda-developers.com/oneplus-x/general/profiles-boeffla-kernel-profiles-t3330187
*** You want my support? Then stick to my rules ***
Guys, I am receiving more and more completely useless support requests in different threads. Useless because people provide nothing to be able to help, not even the minimal possible information they could give.
Hence, I will now remind anyone again on the support guide lines stated here:
http://boeffla.de/index.php/support/support
Also you need to ensure you follow the installation guide lines incl. trouble-shooting stated here:
http://boeffla.de/index.php/support/installation-how-to
And to cut a long story short: If you do not at least provide what I request in the support guide lines, I will IGNORE YOUR REQUESTS IN FUTURE.
Straight and simple. I have enough of people wasting my time just because they are too lazy to write details.
Period.
Also as a reminder:
you use xposed? -> no support, everything is your own issue
you use a custom rom and not the official stock or CM one? -> good luck, you are on your own
you undervolt or overclock? -> have fun, but without my support
Sorry, this might sound harsh (and it is meant to sound harsh), but you cannot imagine about how crappy support requests can be. Stating something does not work is just not enough.
Please consider that!!!
Andi
Am I going to have the first post here ?
Naman Bhalla said:
Am I going to have the first post here ?
Click to expand...
Click to collapse
Oh yes, looks very much like that
You're already making my day a good one, bro. Thanks! Time to play.
jonrodz said:
You're already making my day a good one, bro. Thanks! Time to play.
Click to expand...
Click to collapse
Testing new kernel on RR Rom, till now all seems to work fine :good:
already tested on exodus rom,stucking at booting.So anyone who use exodus rom need not to try.
nihilista said:
Testing new kernel on RR Rom, till now all seems to work fine :good:
Click to expand...
Click to collapse
... on your own risk. Don't report any issues if you have them.
Andi
Lord Boeffla said:
... on your own risk. Don't report any issues if you have them.
Andi
Click to expand...
Click to collapse
No, i won't Just wanted to give a little feedback for those who are interested. Btw, its own risk all the time if developer said its alpha version without support, i know that and hope it won't burn my device
nihilista said:
... i know that and hope it won't burn my device
Click to expand...
Click to collapse
You would be for sure the first one
Andi
@Lord Boeffla
You should update your signature if you have time, I mean if you are still using CM12.1 official nightlies on the one device then idk
hellcat50 said:
@Lord Boeffla
You should update your signature if you have time, I mean if you are still using CM12.1 official nightlies on the one device then idk
Click to expand...
Click to collapse
Yeah, that was VERY outdated meanwhile.
I gave it some rework.
Andi
nihilista said:
Testing new kernel on RR Rom, till now all seems to work fine :good:
Click to expand...
Click to collapse
I'll try it later... Right now l'm on cm13. Tried it on aicp but it bootloops.
jonrodz said:
I'll try it later... Right now l'm on cm13. Tried it on aicp but it bootloops.
Click to expand...
Click to collapse
Yeah... Use Ashwins build. Tameseks and AOKP also work well
Just to report:
I am currently on AOKP with Xposed installed, flashed Boeffla kernel over blu_spark kernel. Didn't encounter any issue so far with zzmove and Battery Yank governor settings.
Will make a full charge and see how battery life is tomorrow.
Thanks, Lord Boeffla, for your work. Greetings from Cologne :good:
orville87 said:
Just to report:
I am currently on AOKP with Xposed installed, flashed Boeffla kernel over blu_spark kernel. Didn't encounter any issue so far with zzmove and Battery Yank governor settings.
Will make a full charge and see how battery life is tomorrow.
Thanks, Lord Boeffla, for your work. Greetings from Cologne :good:
Click to expand...
Click to collapse
Did you start Boeffla-Config once after you flashed the kernel?
Just curious whether it complained about missing mpdecision (bluspark in the past on oos removed mpdecision...).
Only being curious...
Andi
kaixuan_1995 said:
already tested on exodus rom,stucking at booting.So anyone who use exodus rom need not to try.
Click to expand...
Click to collapse
Exodus i guess is AOSP based... N this kernel CM13 based... So!!!!
You can get what i am saying... It will definitely stuck at boot. :fingers-crossed:
Finaly.. I think its now the time to move to CM13
Thanks Lord
Lord Boeffla said:
Did you start Boeffla-Config once after you flashed the kernel?
Just curious whether it complained about missing mpdecision (bluspark in the past on oos removed mpdecision...).
Only being curious...
Andi
Click to expand...
Click to collapse
Yeah, I did, but no complaints about the missing mpdecision. At least there was no popup window or a red text indicating something important.
Hello XDA Members,
I am here with my new kernel. This kernel works on Android 7.x based ROMs
Standard disclaimer :
Code:
This product is distributed free of cost and does not come with a warranty. I will not be responsible for anything that may happen to your phone as a result of flashing this kernel. You have been warned !If you come to me saying that this turned my phone into nuclear bomb , I will surely laugh at you !!!
Introduction :
Photon is a fundamental particle of nature which delivers light to us all. It's mindboggling properties like duality, never stopping from being in motion and presence in so many diverse natural phenomena like photoelectric effect, relativity etc. makes the man ultra-curious about it. A photon is born when atoms transition from excited state to ground state. What's the point of this paragraph in a kernel description post?
Well, like a photon this kernel possess duality. How? By giving better battery back up and performance. ( ) What about non-resting nature of photons? Yes, the kernel support will never stop until Nougat says good bye. ( ). OK now don't ask about analogies regarding photoelectric effect and relativity. ( : D ).
Anyways, now coming to the point I am very much glad to present you, the users of condor, my tiny piece of work for our small beast, .
“The Photon Kernel“
I got very much fascinated by the concept of photons when I studied it for the first time and hence (yes, you've guessed it right!) I've named this kernel Photon.
Enough of the physics class today let's look inside the features of the kernel now ( xD ) :
Features :
1)Compiled with UBER toolchain 4.9
2)Used -O3 and graaphite optimisation flag
3)Added few more governers to stock ones. List of all governers :
Impulse
Ondemand
Ondemandplus
Powersave
Performance
Interactive
Userspace
Smartmax
Lionheart
Nightmare
4)More I/O schedulers.List of all I/O schedulers :
noop
deadline
row
cfq
flops
tripndroid
sio
sioplus
vr
zen
bfq
5)Enable Arch Power
6)Disable Gentle Fair Sleepers
So that’s all for the features as of now. More features will be added in future.
This kernel serves me good for daily use and allowes me to use those governers flawlessly.
To-do list :
1)Add more governers(No more governers planned)
2)Add dt2w feature
(DT2W and intelliplug update is ready but I want everything to be nice and shining before adding them )
Downloads :
Grab your photon build here :
https://www.androidfilehost.com/?fid=457095661767122135
Credits :
@squid2
@rainforce279
flar2
Me
Installation Instructions :
1)Download latest zip from the link given
2)Make sure you are on android nougat rom
3)Reboot to twrp recovery and flash the zip(Hope you like installation script)
4)Reboot and profit
Known Issues :
None so far
If you found something ,let me know with last kmesg
If you like my work and you want me to work more on this project , please hit thanks button. It will encourage me a lot !!!
XDA:DevDB Information
Photon Kernel, Kernel for the Moto E
Contributors
ABSathe
Source Code: https://github.com/Ashutosh-01/photon_android_kernel
Kernel Special Features: Multiple custom governers,I/O schedulers
Version Information
Status: Beta
Current Beta Version: r5
Beta Release Date: 2016-11-16
Created 2016-11-02
Last Updated 2016-12-21
Special thanks to : @Vikrant Desai (For writing OP) @neonkat(For helping me )
Important Note :
Please make sure that you are on a stock kernel that comes with your ROM before flashing this.
If you flash this over another custom Kernel it may lead to unexpected issues
I personally use this on AOSP OMS rom
FAQ:
1)I find this kernel useful and want to support further development how should I do it ??
Ans- Hit the thanks button to encourage me
2)I want to suggest few changes to this kernel and want to contribute.
Ans- If you want to contribute .. feel free to create a pull request in my github
3)I want to request feature .
Ans- Ask in this thread.. if I find feature useful and logical .. I'll add it.,I would appreciate if you link me with commit. It's really hard to dig in the sources and find the exact commit.
4)I have an issue , will you help me ?
Ans- I am not any superstar kernel developer, but I will try my best to solve the issue. Here are few steps you should do before reporting issue here.First of all clean flash your ROM and then flash my kernel
If the issue still persists .. report it here with last_kmesg (can be obtained through Kernel Adiutor app)
5)Is this Kernel better than kernel A or kernel B ?
Ans- Please don't ask such questions in this thread .. if you want to use this kernel use it .. if you find issue .. report it here.
6)Which app should I use for tweaking this kernel ?
Ans- Use Kernel Adiutor app from play store
Dt2w works??
Rajendran Rasa said:
Dt2w works??
Click to expand...
Click to collapse
No it doesn't. But it might be added soon.
Dt2w is not unstable in the Moto E? If it is possible in the next versions consider adding Dt2s/S2w.
Thanks for Kernel
dVinsmoke said:
Dt2w is not unstable in the Moto E? If it is possible in the next versions consider adding Dt2s/S2w.
Thanks for Kernel
Click to expand...
Click to collapse
I tried adding it
But it lead to some serious lags
Maybe(mostly) I'm doing something wrong .. I'll try to fix it ASAP
Sent from my Nexus 5X using XDA Labs
ABSathe said:
I tried adding it
But it lead to some serious lags
Maybe(mostly) I'm doing something wrong .. I'll try to fix it ASAP
Click to expand...
Click to collapse
Take your time
Nice work with the kernel
You could add more hotplugs, Arch power, I/O governors like sio and tcp algorithm westwood and it will be the best kernel for N ?
New build up !!
https://www.androidfilehost.com/?fid=529152257862681879
Added 3 more governers
smartmax/lionheart/nightmare
Hope you guys enjoy
If someone could please report me for battery life and performance .. it would be great for me
A note about dt2w .. I haven't added it yet but would definitely like to (I'm searching for a proper commit that could work with condor )
If you want to report an issue report it properly
How to access the kernel settings??
sushant_ said:
How to access the kernel settings??
Click to expand...
Click to collapse
Just download Kernel Adiutor or some similar app from play store
ABSathe said:
New build up !!
https://www.androidfilehost.com/?fid=529152257862681879
Added 3 more governers
smartmax/lionheart/nightmare
Hope you guys enjoy
If someone could please report me for battery life and performance .. it would be great for me
Click to expand...
Click to collapse
Thanks man!
Any news on dt2w?
WickedCool19 said:
Thanks man!
Any news on dt2w?
Click to expand...
Click to collapse
He mentioned it just two posts above.
Vikrant Desai said:
He mentioned it just two posts above.
Click to expand...
Click to collapse
I asked in context to the new update.
Whether there was something new about it.
WickedCool19 said:
I asked in context to the new update.
Whether there was something new about it.
Click to expand...
Click to collapse
ABSathe said:
A note about dt2w .. I haven't added it yet but would definitely like to (I'm searching for a proper commit that could work with condor )
Click to expand...
Click to collapse
Well, OP said that dt2w haven't been added yet. Only new governors (at least these are the visible changes)
ABSathe said:
If someone could please report me for battery life and performance .. it would be great for me
Click to expand...
Click to collapse
Performance is great! Everything is running smoothly, nice work :good:
Battery life looks Ok. Haven't really tested it yet
I'm going to provide a better report regarding that at the end of the day.
Note: I'm using this kernel with cm 14.1 from squid2
Raxcoms said:
Performance is great! Everything is running smoothly, nice work :good:
Battery life looks Ok. Haven't really tested it yet
I'm going to provide a better report regarding that at the end of the day.
Click to expand...
Click to collapse
Which ROM u r using??
Ujwal Agrawal said:
Which ROM u r using??
Click to expand...
Click to collapse
Cm 14.1 from squid2
Raxcoms said:
Cm 14.1 from squid2
Click to expand...
Click to collapse
I used r3 version of this kernel on the same ROM and I lost RIL
Ujwal Agrawal said:
I used r3 version of this kernel on the same ROM and I lost RIL
Click to expand...
Click to collapse
It took me arround 2~3 minutes to get RIL working.
RIL wasn't working from the beginning
Hello!
I want to introduce my first custom kernel for the Essential PH-1. This is based of several sources, I cherry-picked commits to make improvements to the stock LOS kernel. I'm not a developer, but i really like to port stuff over .
Kernel is suitable for AOSP based ROMS such as RR/AICP/CARBON/LOS etc... If you want to request for specific features, let me know and i'll do my best to bring them over.
Special Features:
Updated to lastest LOS Stock Kernel
Added a few governors like: cultivation / impulse
added a few IO Schedulers: Maple
Kcal Color Control driver
USB Fast Charge - pending will be added in R2
SafetyNet Patch (Bypass bootloader unlocked check)
Dynamic Fsync control
a little Overclock - will be added in R2
Motorola Quickwake - Will be added in R2
and manny other small fixes (you can check the commits in the sources)
Download
Disclaimer: I am not responsible if you use this and brick your device or if your device blows up, implodes, flames start shooting from it or it kills your neighbor's dog. Flash at your own risk. I am not responsible.... It was the other guy... I swear....
Latest Release: SMF-Kernel R2
Known issues:
05.17.2018 - CPU Freq don't always stick, known issue caused by other drivers. Phone will eventually set your frequencies, dont' panic.
Installation:
Obviouly you have a Unlocked Bootloader since you're running a custom rom (make sure to never lock your bootloader in this state)
Boot into Bootloader (adb reboot Bootloader)
If you want to root flash the "Magisk" version of the kernel, it's been prerooted with the latest Magisk Beta available.
Code:
fastboot flash boot SMF-Kernel-R1-Magisk.img
reboot
If you want to manually root, first flash twrp, then from twrp flash the 'non magisk' version and after that flash the magisk zip.
Special Thanks to:
jcadduono
franciscofranco
bedalus
lord_boeffla
flar2
sultanxda
...and many others from whom i cherry pick commits... Sorry if I forgot to mention anyone!
XDA:DevDB Information
SMF-KERNEL, Kernel for the Essential Phone
Contributors
jimbo77
Source Code: https://github.com/Jimbo77/android_kernel_essential_msm8998
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R1
Stable Release Date: 2018-05-17
Created 2018-05-17
Last Updated 2018-05-17
Changelog 05.23.2018
Enabled Motorola QuickWake Driver - This will enable system to do checks or syncs without fully resuming the device, main objective is battery life.
Enabled Dynamic Sync Control by default
OverClock
USB Fast Charge to up 900ma (Original is 500ma)
Disabled Gentle Fair Sleepers
Enabled Boefla Wakelocks - Check the ammount of wakelocks you can block now!
Enabled Wireguard
Enabled several TCP Options - "Westwood" is enabled by default
Min/Max Brightness options is now configurable as well, to avoid the screen go too dim or to bright.
Somehow camera has been fixed! haha
Changelogs 05.17.218
Updated to lastest LOS Stock Kernel
Added a few governors like: cultivation / impulse
added a few IO Schedulers: Maple
Kcal Color Control driver
SafetyNet Patch (Bypass bootloader unlocked check)
Dynamic Fsync control
and manny other small fixes (you can check the commits in the sources)
Reserved
Looks awesome! I'll give it a try soon!
(For anyone wondering about overclocking the CPU, he committed some changes to the github that would apply this and it should appear in the next revision of the kernel.)
Just installed and so far it's buttery smooth.
WARpig5 said:
Just installed and so far it's buttery smooth.
Click to expand...
Click to collapse
I'm glad is running fine for you!
Good stuff, thanks for this! Could you tell me a little more about cultivation? I can't seem to find much information online about it
Also a request, if possible vibration level control would be super appreciated
pantherking said:
Good stuff, thanks for this! Could you tell me a little more about cultivation? I can't seem to find much information online about it
Also a request, if possible vibration level control would be super appreciated
Click to expand...
Click to collapse
I found Cultivation to be really great in terms of perfornance. It's a little bit agressive with the CPU so you get buttery smooth experience with Screen On but it may cost a few % on battery at the end of the day. The good thing is that it has specific tunables and you can set a low cpu freq for when the screen is off.
Specific details from its developer:
-based off of caf 4.4 commits
-uses per-pcu timers
-use state_notifier for screen off timer
option to set different timer rate when screen off
-improrted fastlane with threshold from blu_active
In regards of vibration control. It should be there. I'm using EX Kernel Manager and i can see the vibration option under "Miscellaneous"
jimbo77 said:
I'm glad is running fine for you!
Click to expand...
Click to collapse
Thanks for this. It's running amazing so far. Performance has been great and I'll see how battery life is, but so far it's great.
I can't wait for further updates. I really wanna see what Moto quickwake is haha
jimbo77 said:
In regards of vibration control. It should be there. I'm using EX Kernel Manager and i can see the vibration option under "Miscellaneous"
Click to expand...
Click to collapse
Thanks for the info on cultivation, I don't mind trading some battery life for butter so I'm using it now
For the vibration control, it doesn't actually work/stick. I've tried kernel auditor and EX Kernel Manager. To be fair, so far it has only worked on LOS and I think invisiblek may have rewritten the stock controller or something so no worries if it isn't a high priority haha
pantherking said:
Thanks for the info on cultivation, I don't mind trading some battery life for butter so I'm using it now
For the vibration control, it doesn't actually work/stick. I've tried kernel auditor and EX Kernel Manager. To be fair, so far it has only worked on LOS and I think invisiblek may have rewritten the stock controller or something so no worries if it isn't a high priority haha
Click to expand...
Click to collapse
I'll take a look at the latest commits but I've used the latest los kernel base so I'm not sure why is not sticking maybe it needs rom support too (not sure honestly) hahaha
I've been testing R2 since yesterday. Will update after y he weekend!
Just out of curiosity, was anything involving the camera done to this kernel? I am now able to record videos without the bug, on any of the affected ROMs, with this kernel.
stompysan said:
Just out of curiosity, was anything involving the camera done to this kernel? I am now able to record videos without the bug, on any of the affected ROMs, with this kernel.
Click to expand...
Click to collapse
Nothing related to camera. Are you sure it works with no issues?
What roms have you tested?
jimbo77 said:
Nothing related to camera. Are you sure it works with no issues?
What roms have you tested?
Click to expand...
Click to collapse
So far, AICP and LOS, both with Essential camera app and GCAM port, HD and 4K, 30 and 60 fps where applicable. Issues presented before flashing very consistently, and so far I have been unable to replicate after flashing this kernel.
stompysan said:
So far, AICP and LOS, both with Essential camera app and GCAM port, HD and 4K, 30 and 60 fps where applicable. Issues presented before flashing very consistently, and so far I have been unable to replicate after flashing this kernel.
Click to expand...
Click to collapse
Sp you were right. Honestly don't know what happened but I installed the latest RR (clean install) put R2 on top of it and bam recording works as you mentioned lol..
I guess it was a lucky strike!
after flashing the kernel with magisk, stuck on "AICP is starting"
is this normal?
update: the phone works but no magisk (pre root) after flashing the kernel.....
sinkoo1979 said:
after flashing the kernel with magisk, stuck on "AICP is starting"
is this normal?
update: the phone works but no magisk (pre root) after flashing the kernel.....
Click to expand...
Click to collapse
Hey!
Have you booted once and setup everything before flashing the prerooted image?
I've had that error but having all set and then flashing the image will get me rooted. Try to see if you can find magisk manager in the apps list from the settings if you do, reboot and there will be magisk
Double post... Sorry
jimbo77 said:
Hey!
Have you booted once and setup everything before flashing the prerooted image?
I've had that error but having all set and then flashing the image will get me rooted. Try to see if you can find magisk manager in the apps list from the settings if you do, reboot and there will be magisk
Click to expand...
Click to collapse
Thank you for the reply.
the phone was running AICP and I wanted root so I flash the kernel. I can't find the magisk manager or in the settings about magisk. I guess you have to clean install from the beginning to get the root. Thank you for the Kernel
sinkoo1979 said:
Thank you for the reply.
the phone was running AICP and I wanted root so I flash the kernel. I can't find the magisk manager or in the settings about magisk. I guess you have to clean install from the beginning to get the root. Thank you for the Kernel
Click to expand...
Click to collapse
Shouldn't. If you flashed the prerooted magisk image try downloading the magisk manager app manually from xda and see if magisk works