Hello, I had recently try to install the Nougat update on to my Mexican Galaxy Note 5 SM-N920G. I used the Bangladesh version of the firmware, my phone is on the latino american carrier Telcel. Before the update I had Trinidad and Tobago's Marshmallow firmware and was working great since the las year (Telcel delay so much it's firmware updates so I opted to use other country firmware instead to wait for them to release it for Mexico). Yesterday when I tried to upgrade to Nougat using the Bangladesh firmware, everything went O.K until the part when it starts to write the system image, when Odin reached that point it suddenly put "failed" on the status window and the phone got stuck in the downloading window. I rebooted the phone and I've got a message saying that the firmware update went wrong and that I have to connect it to use Smart Switch's Emergency Recovery Function. I tried that but Smart Switch doesn't recognize my phone when I connect to it, then I tried to flash the firmware that I had before without any success. Whenever I reach the point where Odin start to flash the system image it says fail once again and in the phone shows up a text saying "System Rev. Check Fail Device:1. Binary:0". What can I do in order to get back up and running my beloved Note 5? It is already dead for good? Or there's any hope for saving it?.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
as long as you can turn it on there is a hope.. try look online for the latest firmware for your phone N920G
crisgame93 said:
Hello, I had recently try to install the Nougat update on to my Mexican Galaxy Note 5 SM-N920G. I used the Bangladesh version of the firmware, my
Click to expand...
Click to collapse
Try this.
https://forum.xda-developers.com/showpost.php?p=65031919
I just flash the latest Telcel rom Marshmallow 6.0.1 all ok......but i want Nougat 7.0 which one should download in sammobile? Nepal? or Bangladesh? or Sri Lanka? or India? i dont wanna brick my device! they all are 7.0 for SM-N920G.....If i flash one of those can i loose my signal since im in mexico? Cuz those roms are from a diferent continent! Or can i flash a deferent varyant like SM-N920C? Any help? THANKS IN ADVANCE!
CodeNameRedNeck said:
Try this.
https://forum.xda-developers.com/showpost.php?p=65031919
Click to expand...
Click to collapse
This is the solution, try it and tell us if it worked please.
---------- Post added at 11:42 AM ---------- Previous post was at 11:37 AM ----------
albertwesquer said:
I just flash the latest Telcel rom Marshmallow 6.0.1 all ok......but i want Nougat 7.0 which one should download in sammobile? Nepal? or Bangladesh? or Sri Lanka? or India? i dont wanna brick my device! they all are 7.0 for SM-N920G.....If i flash one of those can i loose my signal since im in mexico? Cuz those roms are from a diferent continent! Or can i flash a deferent varyant like SM-N920C? Any help? THANKS IN ADVANCE!
Click to expand...
Click to collapse
No, you can't flash a different model, only N920G firmware.
Try downloading the India firmware using SamFirm 0.3.6, extract it and you'll get the 4 files (BL, AP, CP and CSC).
Using Odin 3.12.3 put the 4 files on their respective places and flash it. Worked for many in Brazil.
I recommend factory reseting your phone before flashing.
Samsung Pay won't work since it's the Indian version, but everything else including Samsung Health and Gear accessories should work just fine.
Related
Just got my update finally!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please share ota file, I'm dying ATM.
zhable said:
Please share ota file, I'm dying ATM.
Click to expand...
Click to collapse
If i knew how i totally would stick it on megaupload.
know a guide?
Guys i love the update! Phone is faster and looks nice
Sent from my SM-N910U using Tapatalk
Update is awesome guys
Fxxk yeah, finally!
Downloading right now
I've got it too. For some reason the drop down menu has changed to an uglier shade of yellow green, the colour of frog excrement.. Otherwise don't really notice significant changes. Samsung has layered the ui so much that it just looks like.. Well Samsung. Not very evident it's lollipop tbh
If anyone is manually flashing the ROM using ODIN, check your CSC beforehand. There are two different regions of NZ that Samsung released the update for, which are TNZ and NZC. If you flash the wrong CSC version, your CSC will turn to an unknown state meaning that you won't be receiving OTA updates in the future. I have the Taiwan version (BRI) and I flashed the NZC version and now the CSC state is unknown. It's still Lollipop, but you will have to manually flash every updates released from this point forward.
LTE-X said:
If anyone is manually flashing the ROM using ODIN, check your CSC beforehand. There are two different regions of NZ that Samsung released the update for, which are TNZ and NZC. If you flash the wrong CSC version, your CSC will turn to an unknown state meaning that you won't be receiving OTA updates in the future. I have the Taiwan version (BRI) and I flashed the NZC version and now the CSC state is unknown. It's still Lollipop, but you will have to manually flash every updates released from this point forward.
Click to expand...
Click to collapse
NVM mine is still unknown after a reset
tomqin said:
NVM mine is still unknown after a reset
Click to expand...
Click to collapse
It must be how Samsung programmed its CSC for the ROM. When the official ROM comes out for your region, you can restore using Kies 3 or Smart Switch. Then, you will get OTA updates as usual like you did before.
LTE-X said:
If anyone is manually flashing the ROM using ODIN, check your CSC beforehand. There are two different regions of NZ that Samsung released the update for, which are TNZ and NZC. If you flash the wrong CSC version, your CSC will turn to an unknown state meaning that you won't be receiving OTA updates in the future. I have the Taiwan version (BRI) and I flashed the NZC version and now the CSC state is unknown. It's still Lollipop, but you will have to manually flash every updates released from this point forward.
Click to expand...
Click to collapse
weird, I flashed NZC (formerly had BRI) and mine was still BRI. I did some benchmarking and I guess it was a little "dirty" and was getting really low results. So I just went into recovery wiped data and cache. Now my device claims to be NZC and works flawlessly. Best of luck
http://forum.xda-developers.com/showpost.php?p=60294513&postcount=1231
Can update samsung note 7000 to lollipop [emoji27]
Has anyone trying rooting using cf auto root after this update - I did and it failed to root my device
Unresponsive touchscreen after Lollipop
Hi there guys,
After updating my Galaxy Note 4 n910U to Lollipop via OTA, the touchscreen just became unresponsive. The update went on smoothly and my phone booted fine and it's on Lollipop now. I can navigate normally using the screen through the S-Pen but it just would not respond to touch. Very frustrating. New device, been waiting for this update and this happens. Please help.
Thanks!
tomqin said:
NVM mine is still unknown after a reset
Click to expand...
Click to collapse
You could try factory reset in recovery followed by a cache wipe and a repeat factory reset. Flash the NZC firmware again. After flashing again go to recovery and do a factory reset followed by a cache wipe and another factory reset. Boot and check if you are able to still see the csc in unknown status.
thx for the tip,
I'll probably wait for the HK version of Lollipop and then go back to the original csc
where is the link?
Nice information but where is the link???!!!
lumao said:
Nice information but where is the link???!!!
Click to expand...
Click to collapse
Bro, you realise you responded to an old old thread? 5.1.1 is next U variant update, not yet arrived
Hi i had gotten the leaked 4.2.2 F1 installation was almost done then just failed now when i enter past boot logo screen on phone System Software not authorized by At&t been using odin keeps failing don't know why prob wrong rom I'm trying to use please help been going through this all day
DemonNation1 said:
Hi i had gotten the leaked 4.2.2 F1 installation was almost done then just failed now when i enter past boot logo screen on phone System Software not authorized by At&t been using odin keeps failing don't know why prob wrong rom I'm trying to use please help been going through this all day
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2835481
Devo7v said:
http://forum.xda-developers.com/showthread.php?t=2835481
Click to expand...
Click to collapse
i know about that already my question is what firmware do i use ? so many different ones i don't know which one to choose?
DemonNation1 said:
i know about that already my question is what firmware do i use ? so many different ones i don't know which one to choose?
Click to expand...
Click to collapse
NE3 (kitkat) which is easily rootable, which you can then go to lollipop (and keep root) easily enough from there, should you wish. MF1 is ancient, no wonder it's giving you issues.
Even if you don't need or want root, go with NE3. It's the most stable of the recent builds, and from there you can either stay on kitkat or easily upgrade to lollipop, with or without root.
thisisapoorusernamechoice said:
NE3 (kitkat) which is easily rootable, which you can then go to lollipop (and keep root) easily enough from there, should you wish. MF1 is ancient, no wonder it's giving you issues
Click to expand...
Click to collapse
Yeah because now it says firmware upgrade encountered please use samsung kies when i use it doesn't even read my phone when i manually enter the s/n said find model number of phone? after all that so I'm just gonna download the NE3 can u give me a secure download link so i don't mess this up again?
DemonNation1 said:
Yeah because now it says firmware upgrade encountered please use samsung kies when i use it doesn't even read my phone when i manually enter the s/n said find model number of phone? after all that so I'm just gonna download the NE3 can u give me a secure download link so i don't mess this up again?
Click to expand...
Click to collapse
DON'T use kies. Trust me on that. The download link you asked for. Extract all four files and use all four concurrently with Odin should look like:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I would strongly recommend using Odin v3.09 if you aren't already, I have it for you if you need. Yes I realize the picture shows 3.07 but trust me I've done this a million times
Alright I'm gonna do it right now hopefully no errors occur I'm gonna post to tell you what happens
Oh! I should mention, when you do this, your phone will automatically reboot on its own a couple times, and one of those times will be to the stock android recovery. This is completely normal, just leave your phone alone and let Odin do its thing. I say this because I've seen so many people freak out when their phone starts doing stuff on its own. Just let Odin go, it knows what it's doing. Good luck!
hi guys ,
recently i had bought note5 (sm-n920f), to my dismay it was a rooted phone.i checked its ime (359523062717457) on the net and founded that it was samsung s6 after that i checked by app phoneinfo and founded that it was sm-n920v
now the real problem is that i want to basically update it to marshmallow...?? is it possible ...??
as there are certain feature that are not working as they should...
*private mode is not working
*having difficulty with network signals
*it always shows 4g no matter if i connect to 3g or 2g
*cant print (have installed plugin)
so basically can i update it to m.m...??
will it solve the problems....???
how can i update it....??
https://app.box.com/s/212mmmirwrtzhd9g1i1g9htgr0zpl9rx[/IMG]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
darkknight92 said:
hi guys ,
recently i had bought note5 (sm-n920f), to my dismay it was a rooted phone.i checked its ime (359523062717457) on the net and founded that it was samsung s6 after that i checked by app phoneinfo and founded that it was sm-n920v
now the real problem is that i want to basically update it to marshmallow...?? is it possible ...??
as there are certain feature that are not working as they should...
*private mode is not working
*having difficulty with network signals
*it always shows 4g no matter if i connect to 3g or 2g
*cant print (have installed plugin)
so basically can i update it to m.m...??
will it solve the problems....???
how can i update it....??
https://app.box.com/s/212mmmirwrtzhd9g1i1g9htgr0zpl9rx[/IMG]
Click to expand...
Click to collapse
Normally have difficulty to upgrade because of the mix variant. Just afraid you will softbrick it. But it's your call.
Sent from my SM-G925F
dear can u post from where can i get the required software...
darkknight92 said:
dear can u post from where can i get the required software...
Click to expand...
Click to collapse
You only needs smart switch or odin 3.xx. Google it.
Sent from my SM-G925F
Ok so I went ahead and rooted my phone via odin and now my phone says kernel is not seandroid enforcing. Any way I can fix this. I have the note 5 from tmobile
ninibobeanie said:
Ok so I went ahead and rooted my phone via odin and now my phone says kernel is not seandroid enforcing. Any way I can fix this. I have the note 5 from tmobile
Click to expand...
Click to collapse
It's showing that and not booting?. If you flash correct file for your android version & variant should be no problem.
Sent from my SM-G925F
Dear rosli one last thing before i do it what will be the most compatible firm ware for my note 5
PDA N920VVPU2A0J2
CSC N920 VVZW2A0J2
Baseband N920PVPU 2A016
Bootloader N920PVPU 2A016
Should i opt for sprint or verizon..???
darkknight92 said:
Dear rosli one last thing before i do it what will be the most compatible firm ware for my note 5
PDA N920VVPU2A0J2
CSC N920 VVZW2A0J2
Baseband N920PVPU 2A016
Bootloader N920PVPU 2A016
Should i opt for sprint or verizon..???
Click to expand...
Click to collapse
That's the problem. Your csc seems to be verizon but the baseband belongs to sprint. Have you tried smart switch?. Assuming your phone isn't refurbished(since you said the imei belongs to s6), ss will decide which is suitable for your phone.
Sent from my SM-G925F
Rosli59564 said:
That's the problem. Your csc seems to be verizon but the baseband belongs to sprint. Have you tried smart switch?. Assuming your phone isn't refurbished(since you said the imei belongs to s6), ss will decide which is suitable for your phone.
Sent from my SM-G925F
Click to expand...
Click to collapse
I have used smart switch...it says that
version installed : OFA(SPR)
& Had also tried to do a emergency software recovery theough smart switch but my mobile was not supported ...
I had also connected it to samsung kies but it was not supported tooo
darkknight92 said:
I have used smart switch...it says that
version installed : OFA(SPR)
& Had also tried to do a emergency software recovery theough smart switch but my mobile was not supported ...
I had also connected it to samsung kies but it was not supported tooo
Click to expand...
Click to collapse
Very risky and high chance to brick. As you said it's a combination of 920f, s6 and 920v. I have no idea.
Sent from my SM-G925F
Thanks for the ur time rosli.....
Hi darkknight92,
I'm experiencing the same issue as mentioned by you can you please share how to fix the same. You can mail me @Parik****[email protected]
The Firmware I am on is G977UVRU0ASDG
I tried to update OTA and update assistant for PC and both failed saying this firmware cannot be updated. So I am really confused. Can someone confirm any further info about this firmware version? I enjoy the phone and I decided one day to check why I haven't gotten Android 10, and thus this is where I am now.
Also is it as simple as flashing the latest firmware via odin? If so, which site offers a dependable VZW firmware I can try flashing? Can I keep my files or would I have to make a backup first, flash via odin, then restore (which I hate to do because setting up a new phone takes so much time).
But most importantly I am curious to know more about this firmware version and what it is! Seems like VZW doesn't think its theirs. Thank you in advance.
Smartswitch says SDG, what is SDG? Is there a simple refresh/fix so that I can get OTA updates? Please help!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit: flashed newest FW via odin based on the FW thread. Found out my firmware was OG/beta and even verizon couldn't recognize it! weird!
u were on rev0 pre-release firmware somehow.. coulda been some exploits prolly lol
elliwigy said:
u were on rev0 pre-release firmware somehow.. coulda been some exploits prolly lol
Click to expand...
Click to collapse
yeah, there were actually some crazy gestures that i noticed they got rid of in the FW i got it to upgrade to. LOL.
I'm having similar issues with the same firmware. Did you ever find a way to update your phone? I bought mine on ebay, supposedly NIB, but it came in generic packaging and said "demo" on a sticker on the back of the phone.
chillsen said:
The Firmware I am on is G977UVRU0ASDG
I tried to update OTA and update assistant for PC and both failed saying this firmware cannot be updated. So I am really confused. Can someone confirm any further info about this firmware version? I enjoy the phone and I decided one day to check why I haven't gotten Android 10, and thus this is where I am now.
Also is it as simple as flashing the latest firmware via odin? If so, which site offers a dependable VZW firmware I can try flashing? Can I keep my files or would I have to make a backup first, flash via odin, then restore (which I hate to do because setting up a new phone takes so much time).
But most importantly I am curious to know more about this firmware version and what it is! Seems like VZW doesn't think its theirs. Thank you in advance.
Smartswitch says SDG, what is SDG? Is there a simple refresh/fix so that I can get OTA updates? Please help!
Edit: flashed newest FW via odin based on the FW thread. Found out my firmware was OG/beta and even verizon couldn't recognize it! weird!
Click to expand...
Click to collapse
davewvu86 said:
I'm having similar issues with the same firmware. Did you ever find a way to update your phone? I bought mine on ebay, supposedly NIB, but it came in generic packaging and said "demo" on a sticker on the back of the phone.
Click to expand...
Click to collapse
it aas prolly an LDU that they converted into a working phone
shouldnt matter though. updates go out in stages so who knows when ull get it
u guys can always manually update using odin
Hello everyone,
Last week, I did something stupid. I was looking into updating my Samsung Galaxy S10 to Android 13, and for that, I had to perform a bootleg on my phone. Since I don't have enough knowledge about it, I followed a video tutorial. However, I don't think they explained everything correctly because I encountered an error while loading my phone. To fix this, I had to reinstall the firmware and then restart it. But after the restart, the Samsung interface and all my apps appeared much larger, which is extremely annoying. I have already tried going to the accessibility options and adjusting the icon grid, but it only helps with a small part of the interface. Can someone help me?
I know it's dumb to do this without enough knowledge, but I still wanted to give it a try.
What do you mean by "bootleg"?
V0latyle said:
What do you mean by "bootleg"?
Click to expand...
Click to collapse
I'm not sure how it is called I thought it called bootleg.
I got stuck in the blue Download screen for samsung s10.
It looked like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After that I had to reinstall the firmware but I didn't find a firmware option for my country so I installed from a country nextdoor.
When I signed in to the phone the UI was waaay bigger than before.
You mean you installed a different CSC? As long as the firmware is for your model number, it should be fine. To change the UI size go into Display Settings.
What is the model number of your device? I can help you look for the latest firmware on SamMobile.
V0latyle said:
You mean you installed a different CSC? As long as the firmware is for your model number, it should be fine. To change the UI size go into Display Settings.
What is the model number of your device? I can help you look for the latest firmware on SamMobile.
Click to expand...
Click to collapse
Yes other country but the right firmware. I already changed the display settings but that doesn't solve the problem. my interface in different apps is also way bigger.
My model number is: SM-G973F/DS
Country: Belgium
(but I installed from the Netherlands, but i think that is not the problem)
Noopi said:
Yes other country but the right firmware. I already changed the display settings but that doesn't solve the problem. my interface in different apps is also way bigger.
My model number is: SM-G973F/DS
Country: Belgium
(but I installed from the Netherlands, but i think that is not the problem)
Click to expand...
Click to collapse
Did you wipe data when you installed the firmware?
V0latyle said:
Did you wipe data when you installed the firmware?
Click to expand...
Click to collapse
I didn't wipe it before I started the download.
I didn't do enough research because suddenly I got a message that it was wiping everything. what I didn't want
Well, I would always recommend wiping data when flashing a different CSC.
V0latyle said:
Well, I would always recommend wiping data when flashing a different CSC.
Click to expand...
Click to collapse
What should I do to get my old ui back should I do another firmware update to hopefully get my old interface back. I think it could have something to do with the android version?
Before I did the firmware manually I just had the stock phone with its automatic update. I see there are different android version for the samsung s10. with the firmware update I now have:
android: 12
One UI version: 4.1