meizu mx6 mod - is it possible to delete flyme and just run pure android? - Meizu MX6 Themes, Apps, and Mods

does anyone know how to remove flyme? it's really obnoxious

不
不可以

Root
jasonlive.com.au said:
does anyone know how to remove flyme? it's really obnoxious
Click to expand...
Click to collapse
Do you unlock bootloader and root the phone?
I think it will be difficult to install a new rom without more post

I am running flyme 6.1.0.0A. chinese version, in this version, there is no longer an option to "enable root permission". I was able to enable root prior to the latest update. now i cannot find the on/off toggle for it anywhere.
I have tried to "update" the phone with the latest flyme 6.7.3.3G global version, however it begins the update process and then about 1 minute later returns to the existing version like nothing has happened. I have also tried to "downgrade" to the previous global version but the result is nothing also. i feel i am stuck!

jasonlive.com.au said:
I am running flyme 6.1.0.0A. chinese version, in this version, there is no longer an option to "enable root permission". I was able to enable root prior to the latest update. now i cannot find the on/off toggle for it anywhere.
I have tried to "update" the phone with the latest flyme 6.7.3.3G global version, however it begins the update process and then about 1 minute later returns to the existing version like nothing has happened. I have also tried to "downgrade" to the previous global version but the result is nothing also. i feel i am stuck!
Click to expand...
Click to collapse
too bad. I hope for you the seller will accept the warranty
You can try with Flyme 6.7.3.3G beta Nougat for Meizu MX6
required:
Meizu MX6 Flyme 6 beta Nougat Rom
Meizu MX6 USB Driver
Before:
1 - make a backup of your phone
2- 80% minimum charge
3 - Read all step carefully
4 - I'm not reponsable if you fail
How do:
1 - Download Flyme 6 beta Nougat Rom zip file
2 - Install Meizu USB Driver in your computer
3 - Connect your phone to your PC and paste the .zip file into your Phone
4 - go to Recovery Mode
5 - In Recovery mode select System upgrade and press: Start
6 - Let the flashing process do. Do not stop it. Let 4 to 6 minutes before your phone starts with the first Nougat rom startup
7 - Enjoy

thank you for that, great reply, i tried it but when in recovery mode, i select "proceed with update" and after 2 seconds it says "firmware corrupt" and will not load anything
computeur said:
too bad. I hope for you the seller will accept the warranty
You can try with Flyme 6.7.3.3G beta Nougat for Meizu MX6
required:
Meizu MX6 Flyme 6 beta Nougat Rom
Meizu MX6 USB Driver
Before:
1 - make a backup of your phone
2- 80% minimum charge
3 - Read all step carefully
4 - I'm not reponsable if you fail
How do:
1 - Download Flyme 6 beta Nougat Rom zip file
2 - Install Meizu USB Driver in your computer
3 - Connect your phone to your PC and paste the .zip file into your Phone
4 - go to Recovery Mode
5 - In Recovery mode select System upgrade and press: Start
6 - Let the flashing process do. Do not stop it. Let 4 to 6 minutes before your phone starts with the first Nougat rom startup
7 - Enjoy
Click to expand...
Click to collapse

Hello
I don't understand
I do it with my phone. If your MX6 is root with USB debuging and unknow source
you paste Meizu MX6 Flyme 6 beta Nougat Rom in your phone
select the folder with the Flyne folder app choise upgrade OS
just lets the machine work (it's long don't worry)

with the version of flyme on this phone, there is no "enable root". well, if there is, i cannot find it :/
computeur said:
Hello
I don't understand
I do it with my phone. If your MX6 is root with USB debuging and unknow source
you paste Meizu MX6 Flyme 6 beta Nougat Rom in your phone
select the folder with the Flyne folder app choise upgrade OS
just lets the machine work (it's long don't worry)
Click to expand...
Click to collapse

you go to the fingerprint and security and in the bottom is the root permission and when you update the software dont forget in recovery wipe data too

paulinhosetubal said:
you go to the fingerprint and security and in the bottom is the root permission and when you update the software dont forget in recovery wipe data too
Click to expand...
Click to collapse
ok i found the root permission - it requires being logged into flyme account! once logged in, the "root permission" toggle appears. however, now what do I do? remember my original thread, I am trying to remove flyme and just run android
thanks

Sorry for late reply if you are interrested yet but i think you cant do that because you have the bootloader unlocked and meizu wont do that so you can only put meizu software its their policy i have a meizu mx6 i cant do nothing but only their software you cant get rid of meizu flyme its a bit weird have a smartphone i do much anything about it thank you im meizu recovery you can use only their roms download flyme roms of meizu mx6 and in recovery you have to wipe data too for a fresh rom only wipe data you can install the rom

I need a video tutorial or a pictured installation guide to install a global rom to my rooted device which it has a 5.2.2.6A rom. Can anyone help?

jasonlive.com.au said:
does anyone know how to remove flyme? it's really obnoxious
Click to expand...
Click to collapse
Whitout Flyme the Chiness is HS
But you could downgrade the OS (Flyme 6.3 for exemple)
Il's the only solution

Related

Can't unlock bootloader and fake rom

Hello everyone i have this problem. I bought an sh xiaomi mi5 and it has a fake rom installed, basicly i can't install zip files from the updater or anything similar. I have recived the unlock code from xiaomi but i just can't unlock the phone, it gets stuck at 50% and that is, from what i've read, because i don't have the chinese developer build. I can't install the dev build and i can't unlock.. So can someone please help me and tell me how the hell am I goig to install the official rom? Please..
I have tried the chinese xiaomi thing, and when i click shift+ the flash i click recovery, it won't work because it doesn't find my phone, i tried every port and they won't work.
This what worked for me
Download a fastboot rom from miui site.
Do the deep flash cable method, that always works. With fairly beginner soldering skill I managed to make one in 10 minutes
mateileul said:
Hello everyone i have this problem. I bought an sh xiaomi mi5 and it has a fake rom installed, basicly i can't install zip files from the updater or anything similar. I have recived the unlock code from xiaomi but i just can't unlock the phone, it gets stuck at 50% and that is, from what i've read, because i don't have the chinese developer build. I can't install the dev build and i can't unlock.. So can someone please help me and tell me how the hell am I goig to install the official rom? Please..
I have tried the chinese xiaomi thing, and when i click shift+ the flash i click recovery, it won't work because it doesn't find my phone, i tried every port and they won't work.
Click to expand...
Click to collapse
On Windows 7 i needed to manually install ADB fastboot drivers from Control Panel -> Device Manager. If you see "Unknown ADB interface" or similiar in device manager, then manual installation of drivers is required.
in fastboot mode .
i solved it by;
1.disable internet coonection cause of auto update driver
2.uninstall kedacom driver, select delete files.
3.update driver manually and select let me pick driver.
4. choose usb composite device
then retry
can u kindly explain the process in detail ....step by step it will help many ppl as almost all resellers r selling mi5 with fake Roms ... and MIUI forum is a mess .....
thanks
---------- Post added at 02:49 AM ---------- Previous post was at 02:43 AM ----------
adamfirari said:
in fastboot mode .
i solved it by;
1.disable internet coonection cause of auto update driver
2.uninstall kedacom driver, select delete files.
3.update driver manually and select let me pick driver.
4. choose usb composite device
then retry
Click to expand...
Click to collapse
honestly I couldn't find a single tutorial about :
1 how to unlock bootloader for mi5
2 flash official ROM ( global or Chinese) from reseller fake rom
3 how to root and flash twrp
MIUI forum is pure garbage
mateileul said:
Hello everyone i have this problem. I bought an sh xiaomi mi5 and it has a fake rom installed, basicly i can't install zip files from the updater or anything similar. I have recived the unlock code from xiaomi but i just can't unlock the phone, it gets stuck at 50% and that is, from what i've read, because i don't have the chinese developer build..
Click to expand...
Click to collapse
I had the same problem with an Mi 5s and a fake ROM. Amongst the chaos of the MIUI forums I found a poster who described what worked for him unlocking a Redmi Note. I followed his advice and the unlocking process went without a hitch after many frustrating attempts getting to 50% with an error.
The answer was to do a factory reset, then on the initial setup, log into your Mi account and accept everything - sync, data, find, backup etc. Once this was done, I ran MiFlashUnlock and the unlocking process completed successfully.
Hope this helps!
unlock process
notoriouspk said:
can u kindly explain the process in detail ....step by step it will help many ppl as almost all resellers r selling mi5 with fake Roms ... and MIUI forum is a mess .....
thanks
---------- Post added at 02:49 AM ---------- Previous post was at 02:43 AM ----------
honestly I couldn't find a single tutorial about :
1 how to unlock bootloader for mi5
2 flash official ROM ( global or Chinese) from reseller fake rom
3 how to root and flash twrp
MIUI forum is pure garbage
Click to expand...
Click to collapse
1. you should flash offical global rom or offical chinese development rom with mi flash app
http://en.miui.com/thread-272376-1-1.html
2. Then reboot to fastboot by volume down + power button combination.
3. if device manager shows your device as "usb composite device ,you can go on and try "fastboot devices" command in adb folder command promt to see if command is working .if not ;
3.a. it is probably shown as "kedacom usb device".right click device , uninstall drivers by selecting remove files option.
3.b. disable internet connection and right click and refresh in device manager .after your device is shown . right click on device and select update driver
3.c. select "browse my computer" and after that choose "let me peek" option. than find "usb composite driver" and install
3.d. retry fastboot command as mantioned above.
4.then use this thread http://forum.xda-developers.com/mi-5/how-to/unlocking-xiaomi-mi-5-bootloader-t3336243 for unlock .
5. this one for twrp http://forum.xda-developers.com/mi-5/development/recovery-twrp-xiaomi-mi-5-t3412123
6. now you can install any rom you want .another usefull info ; if you dont want to see password on every boot after flashing twrp ,backup your data use "fastboot erase userdata" in fastboot mode. remember this will remove all data on your phone .
thanks man will follow ur instructions as soon as I get my mi5

[GUIDE] Unbrick oneplus 5 with Official Unbrick tool | HARD BRICK | SOFT BRICK |

The OnePlus 5 Unbrick Tool was posted on online a few days ago on Chinese OnePlus Forum which they received via a OnePlus staff member. The tool is in many ways similar to the one provided for OnePlus 3/3T with the only difference being that it downloads, installs,and flashes HydrogenOS firmware exclusively.
The unbrick tool wipes your device and installs a stock HydrogenOS based rom on it.
STEPS
1. Extract Drivers and Recovery Tool files on Desktop
2. Shut Down your device (If the device is bricked, ensure that it has sufficient charge)
3. Hold the Volume Up button and connect device to PC
4. Open Device Manager on PC and find QHUSB BULK under Unknown Devices
5. Hit right click on the device and update device software. Refer to locally installed drivers if automatic installation fails
6. Your device should now be mentioned as Qualcomm 9008
7. Open the Unbrick tool with elevated privileges (as an Administrator) and hit Start on top left corner
8. Wait until you see a green text flashing. This ensures that the device has successfully been restored
9. Disconnect OnePlus 5 and reboot your unbricked device
REQUIRMENTS
1. Unbrick tool for oneplus 5
HTML:
https://mega.nz/#!kyJ1XJ7D!ghgEuR2sb1XkyGM4n5KDjOiID4KS6cFL5cIQqjSRAkc
2. ADB DRIVERS
HTML:
http://download.clockworkmod.com/test/UniversalAdbDriverSetup.msi
OPTIONAL
Install Latest OXYGEN OS over HYDROGEN OS
REQUIRMENTS
1.Unlocked Bootloader
2.Twrp
3.Magisk or super user
4.Oxygen os
HTML:
http://downloads.oneplus.net/devices/oneplus-5/
5.Flash Oxygen Os using twrp
GUIDE TO UNLOCK BOOTLOADER | FLASH TWRP | MAGISK | ROOT |
Ill Create Mirror And update the Link And VIDEO about unbrick tool Coming SOOOOOOONNN
Already here : https://forum.xda-developers.com/oneplus-5/how-to/unbrick-tool-oneplus-5-t3648169/page2
tinuz97 said:
Already here : https://forum.xda-developers.com/oneplus-5/how-to/unbrick-tool-oneplus-5-t3648169/page2
Click to expand...
Click to collapse
M sorry wil delete this thread
Thanks alot! You just saved my life

[All-in-One] Redmi Note 7 (lavender): Unlock Bootloader, Flash TWRP, Root, Flash ROM

Dear Redmi Note 7 user,
I'm not responsible if anything happens to your device. If you execute these AiO procedures properly then you shouldn't face any problems.
Before you proceed please back up all your important data and make sure that your phone battery is charged >80%!
A. Prerequisites:
1. Disable driver signature enforcement in Windows
If your computer doesn’t recognize Xiaomi drivers then please disable driver signature enforcement. How to do this please read here: http://en.miui.com/thread-237673-1-1.html
2. Install ADB and Fastboot tools with drivers on Windows
How to do this please read here: https://forum.xda-developers.com/showthread.php?t=2588979
Restart your computer.
3. Enable "OEM unlocking" and "USB debugging" in your device
a. Enable Developer Options in: Settings/About Phone/MIUI version. Click on MIUI version seven times
b. Now go to: Settings/Additional Settings/Developer Options and check "OEM unlocking" and "USB debugging"
4. Check if your bootloader is locked
a. After successful installation of "ADB and Fastboot" enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer via USB cable (best would be the original cable).
b. Go to the folder where you have put the "ADB and Fastboot" and open a command window inside that folder. To do that hold together "Shift + Right Click" on any empty white space inside the folder and then select "Open PowerShell Window Here" or "Open Command Window Here"
c. Enter the terminal command in command line: >>fastboot devices<<
If you don't see your device it means that the drivers weren't installed properly or the device wasn't connected properly. If this happens please reinstall your drivers from Point A. 2. or try these drivers here:
http://xiaomiadvices.com/download-xiaomi-usb-drivers/
d. If you see your device then enter the terminal command in command line: >>fastboot oem device-info<<
If your bootloader is locked, you'll get the following status (or something similar):
…………………………………………………………………….
(bootloader) Device tampered: false
(bootloader) Device unlocked: false
(bootloader) Device critical unlocked: false
(bootloader) Charger screen enabled: false
(bootloader) Display panel:
OKAY [ 0.058s]
finished. total time: 0.063s
………………………………………………………………………
If your bootloader is unlocked, you'll get following status (or something similar):
…………………………………………………………………….
(bootloader) Device tampered: false
(bootloader) Device unlocked: true
(bootloader) Device critical unlocked: true
(bootloader) Charger screen enabled: false
(bootloader) Display panel:
OKAY [ 0.053s]
finished. total time: 0.055s
………………………………………………………………………
5. Request Permission from Xiaomi to Unlock the Bootloader
a. Create a Mi Account: https://global.account.xiaomi.com/pass/register
b. Sign to Xiaomi and apply for unlocking https://en.miui.com/unlock/
6. Connect your Mi Account to your Device
Go to: Settings/Additional Settings/Developer Options/Mi Unlock status and check "Add account and device"
B: Unlock the Bootloader
Unlocking the bootloader will erase all your data! So please back up your data before you unlock the bootloader!
1. You must enable "OEM unlocking" and "USB debugging" as per point A. 3.
2. You must connect your Mi Account with your device as per point A. 6.
3. Download Mi Unlock Tool here: https://en.miui.com/unlock/
4. Enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer via USB cable (best would be the original cable)
5. Start the Mi Unlock Tool
6. Enter your eMail and your password of your Mi Account
7. Connect you device to your computer and start the unlock procedure
8. Follow the unlock tool instructions until the unlock procedure is finished
9. Reboot your device
If you get the message, that the unlocking can be done after 72h or 360h or 720h etc., then you have to wait for that time to pass.
C: Install the TWRP Recovery
a. Your bootloader must be unlocked
b. The official twrp can be downloaded here: https://twrp.me/xiaomi/xiaomiredminote7.html. However the official twrp for Redmi Note 7 is not yet available. For the time being please download the latest unofficial "twrp-x.x.x.img" from here https://forum.xda-developers.com/re...overy-unofficial-twrp-touch-recovery-t3921637 and put it into a dedicated folder in your computer and rename it to "twrp".
c. Go to the folder where you have put the twrp-file. Now open a command window inside that folder. To do that hold together "Shift + Right click" on any empty white space inside the folder and then select "Open PowerShell Window Here" or "Open Command Window Here"
d. Enter fastboot mode by holding together "Volume Down + Power" and connect your device to your computer
e. Enter the terminal command in command line: >>fastboot flash recovery twrp.img<<. Attention: Do not restart your device otherwise Xiaomi's original recovery might overwrite the custom recovery twrp!
f. Boot your device into recovery (3 possible methods)
+ by entering terminal command in command line: >>fastboot boot twrp.img<<, or
+ by holding together "Volume Up + Power" until you see the MI logo, release "Power" button but keep pressing "Volume Up" until you see the recovery, or
+ by holding together "Volume Up + Volume Down + Power" until you see recovery
If you only want to root your smartphone, then please continue to point D
If you want to install a custom rom, then please continue to point E
D. Root Your Smartphone
a. Download latest Magisk from here: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445 and put it into internal memory of your smartphone or into the micro sd-card or into on-the-go memory stick
b. In the main twrp screen please click "Install", search for the Magisk-*zip*-file and flash it
c. Restart your smartphone
E. Install A Custom Rom
1. Download the desired rom and put it into device's internal memory or into the micro sd-card or into on-the-go memory stick:
a. Lineage
The official Lineage for Redmi Note 7 is not yet available, but when it becomes available you can download it from here:
https://download.lineageos.org/lavender
Lineage roms don't have Google Apps integrated in them.
b. Resurrection Remix
Please download the official Resurrection Remix for Redmi Note 7 (lavender) from here:
https://get.resurrectionremix.com/?dir=lavender
Resurrection Remix roms don't have Google Apps integrated in them.
c. ATOM
Please download the official ATOM for Redmi Note 7 (lavender) from here:
https://sourceforge.net/projects/atom-os-project/files/Ten/lavender/
ATOM roms usually don't have Google Apps integrated in them but the developer of AOSP Extended for lavender is offering both versions, with and without Google Apps.
d. Xiaomi.EU
Download the latest rom (weekly or stable) from here: https://xiaomi.eu/community/
Global Xiaomi.EU roms already have Google Apps integrated in them.
2. (in case you want to have root on your device) Download "addonsu-arm64-signed.zip" (for Lineage: https://download.lineageos.org/extras) or (for other Roms) the latest Magisk (from here: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445) and put it into device's internal memory or into the micro sd-card or into on-the-go memory stick.
3. If the rom doesn’t contain Google Apps then download Google Apps ARM64, Mini, Pico, Nano etc. from here www.opengapps.org and put them into device's internal memory or computer or on-the-go memory stick or micro sd-card.
4. Enter recovery mode:
+ by holding together "Volume Up + Power" until you see the MI logo, release "Power" button but keep pressing "Volume Up" until you see the recovery, or
+ by holding together "Volume Up + Volume Down + Power" until you see recovery
5. Wipe: Dalvik / Art Cache; System; Data; Cache; (be careful, don't wipe internal storage!)
6. Go back to main twrp screen and install the Rom, install Google Apps (if the Rom doesn’t contain them), install "addonsu-arm64-signed.zip" (in case of Lineage) or the latest Magisk (in case of other Roms).
7. Reboot. That's it, you are done.
F. Returning To The Original Xiaomi Rom, MIUI
for those users who would like to return to original Xiaomi rom MIUI, below the flashing instructions and download links for the Fastboot and Recovery roms:
1. Fastboot:
a. Download latest fastboot rom (*.tgz*-file) from here: https://c.mi.com/oc/miuidownload/detail?guide=2
b. Flash the rom as per instructions explained in the a.m. link.
2. Recovery:
a. Download latest recovery rom (*.zip*-file) from here: http://c.mi.com/oc/miuidownload/detail?device=1700360 and put it into device's internal memory or into the micro sd-card or into on-the-go memory stick
b. Enter recovery mode:
+ by holding together "Volume Up + Power" until you see the MI logo, release "Power" button but keep pressing "Volume Up" until you see the recovery, or
+ by holding together "Volume Up + Volume Down + Power" until you see recovery
c. Wipe: Dalvik / Art Cache; System; Data; Cache; (be careful, don't wipe internal storage!)
d. Go back to main twrp screen and install the rom
e. Reboot. That's it, you are done.
If my guide helped you please click "thanks" and enjoy your phone.
Frequently Asked Questions (FAQ):
Question:
My computer doesn't recognize my device. What can be the problem?
Answer:
1. Check your cable if it is the original one, and if not then use the original one.
2. Check you drivers if they are installed properly and if not, then re-install them.
3. If the problem is not with point 1 and 2 then please try another computer.
Question:
Can I bypass the waiting time to unlock the bootloader?
Answer:
No you can't. You have to wait for that time to pass.
You know you can probably root without recovery using Magisk Manager and fastboot. You'll just need the original boot image which you should be able to extract from Xiaomi's firmware downloads.
any confirmation how many hours to unlock this device (after 72h or 360h or 720h) ?
Cryslin111 said:
any confirmation how many hours to unlock this device (after 72h or 360h or 720h) ?
Click to expand...
Click to collapse
Unfortunatelly the waiting time varies from person to person and also which smarphone model we are talking about. Until now the longest time I waited to unlock a bootloader was 72h. In Xiaomi forums people are reporting that they are waiting btw. 72h - 720h, sometimes even more than 1000h.
TWRP for Redmi note 7 from LR.TEAM 21/1/2019
https://drive.google.com/file/d/1nYu4gbLnGcoWnfXTOONwJk4ifc82l-Sc/view
senerex said:
Unfortunatelly the waiting time varies from person to person and also which smarphone model we are talking about. Until now the longest time I waited to unlock a bootloader was 72h. In Xiaomi forums people are reporting that they are waiting btw. 72h - 720h, sometimes even more than 1000h.
Click to expand...
Click to collapse
I register my mi account by a google voice number,would it make the unlock process faster?OR perhaps I even could unlock my redmi note 7?
wangweitung said:
I register my mi account by a google voice number,would it make the unlock process faster?OR perhaps I even could unlock my redmi note 7?
Click to expand...
Click to collapse
No, I don't think so. No.
senerex said:
No, No.
Click to expand...
Click to collapse
I will soon check how long I will wait to unlock bootloader.
---------- Post added at 11:32 AM ---------- Previous post was at 11:12 AM ----------
senerex said:
No, I don't think so. No.
Click to expand...
Click to collapse
It's sad to see that I have to wait 360 hours before I can unlock.
wangweitung said:
It's sad to see that I have to wait 360 hours before I can unlock.
Click to expand...
Click to collapse
same here
Enddo said:
same here
Click to expand...
Click to collapse
Sam here (actuall 359h)
I've heard that Xiaomi's phone bought from mainland China can't unlock bootloader and flash global rom. Really?
ColtonDRG said:
You know you can probably root without recovery using Magisk Manager and fastboot. You'll just need the original boot image which you should be able to extract from Xiaomi's firmware downloads.
Click to expand...
Click to collapse
How would you flash the patched boot.img with a locked bootloader?
It shows this and blocks you from proceeding:
vEEGAZ said:
How would you flash the patched boot.img with a locked bootloader?
It shows this and blocks you from proceeding:
Click to expand...
Click to collapse
unlock bootloader first!
lehungit8 said:
I've heard that Xiaomi's phone bought from mainland China can't unlock bootloader and flash global rom. Really?
Click to expand...
Click to collapse
That's completely untrue. I do tutorials for these devices on my website Android Explained and have bought the latest ones from the Mi Global seller account on AliExpress.
All have been completely sealed devices, shipped a day or two after their Chinese launch, and once you can unlock the bootloader (you do have to wait a certain period of time), then you can flash the global fastboot ROM with either Mi Flash, or just using the flash_all.bat file
---------- Post added at 12:12 PM ---------- Previous post was at 12:10 PM ----------
vEEGAZ said:
How would you flash the patched boot.img with a locked bootloader?
It shows this and blocks you from proceeding:
Click to expand...
Click to collapse
the person you quoted said 'without recovery'. . .not 'with a locked bootloader'
You'll still need to unlock the bootloader, but once you do then you can patch the boot.img file for the device with Magisk and then load it onto the phone (instead of installing TWRP and then flashing Magisk) to gain root access
vEEGAZ said:
How would you flash the patched boot.img with a locked bootloader?
It shows this and blocks you from proceeding:
Click to expand...
Click to collapse
Yep, as the person above said, I said you could do it without recovery, not without unlocking the bootloader.
ColtonDRG said:
Yep, as the person above said, I said you could do it without recovery, not without unlocking the bootloader.
Click to expand...
Click to collapse
Alright, I misunderstood you.
Still more 14 days to go until I can unlock the bootloader
That's completely untrue. I do tutorials for these devices on my website Android Explained and have bought the latest ones from the Mi Global seller account on AliExpress.
All have been completely sealed devices, shipped a day or two after their Chinese launch, and once you can unlock the bootloader (you do have to wait a certain period of time), then you can flash the global fastboot ROM with either Mi Flash, or just using the flash_all.bat file
That sounds interesting - so - please state if I'm correct:
Once Redmi Note 7 Global version is out, I could install the official Global ROM and this one would work and have OTA upgrades in future on my Chinese Redmi Note 7?
Thank you in advance.
tomsag said:
Once Redmi Note 7 Global version is out, I could install the official Global ROM and this one would work and have OTA upgrades in future on my Chinese Redmi Note 7?
Click to expand...
Click to collapse
Global rom for Redmi Note 7 is not available yet, and thus I can't test it myself yet, but judging by all other Xiaomi Smartphones I had until now (Mi 5, Mi 6, Mix 2s, Redmi Note 4, Redmi Note 5 etc.) I was always able to flash the global rom on my Chinese version of these smartphones. Of course the bootloader will have to be unlocked. I'm quite sure that flashing the global rom on Chinese version of Redmi Note 7 will be possible too!
EDIT 1:
Thanhbat said:
Does OTA work on that ROM? And How about Android development on Chinese versions compare to Global versions? Can you flash global's ROM on Chinese version?
Thanks
Click to expand...
Click to collapse
Yes, OTA will work! Android development on Chinese versions compared to Global version is a prerogative of developers. They decide which version of MIUI (Chinese or Global) they take as basis for their further development.
senerex said:
Global rom for Redmi Note 7 is not available yet, and thus I can't test it myself yet, but judging by all other Xiaomi Smartphones I had until now (Mi 5, Mi 6, Mix 2s, Redmi Note 4, Redmi Note 5 etc.) I was always able to flash the global rom on my Chinese version of these smartphones. Of course the bootloader will have to be unlocked.
I'm quite sure that flashing the global rom on Chinese version of Redmi Note 7 will be possible! Pozdrav...
Click to expand...
Click to collapse
Does OTA work on that ROM?
And How about Android development on Chinese versions compare to Global versions? Can you flash global's ROM on Chinese version?
Thanks

Question Hard brick

PLEASE HELP!!
I just hard bricked my wife's new Redmi Note 10 Pro!
I bought the Chinese version and got the bootloader unlocked, and then tried to replace it with the global Rom from the official website.
In the process I kept receiving an error: "Mismatching Image and device error ".
I followed a couple of tutorials and this particular seem popular, where I had to delete some lines in the .bat file.
After that the flashing process started but halfway an error appeared again. After several attempts I decided to restart from Fastboot mode, and this was when I realized it had bricked.
Now I can't go to Fastboot mode and I keep getting Vibrations but a dead screen.
PLEASE HELP
swarzB said:
PLEASE HELP!!
I just hard bricked my wife's new Redmi Note 10 Pro!
I bought the Chinese version and got the bootloader unlocked, and then tried to replace it with the global Rom from the official website.
In the process I kept receiving an error: "Mismatching Image and device error ".
I followed a couple of tutorials and this particular seem popular, where I had to delete some lines in the .bat file.
After that the flashing process started but halfway an error appeared again. After several attempts I decided to restart from Fastboot mode, and this was when I realized it had bricked.
Now I can't go to Fastboot mode and I keep getting Vibrations but a dead screen.
PLEASE HELP
Click to expand...
Click to collapse
Download the chinese version
So open google translate and translate" Redmi Note 10 Pro stock firmware China "
copy and paste in google the translated text once you fing one you can download try that one but only flash the partition you need other wise your phone will be in chinese
flairepathos.info said:
Download the chinese version
So open google translate and translate" Redmi Note 10 Pro stock firmware China "
copy and paste in google the translated text once you fing one you can download try that one but only flash the partition you need other wise your phone will be in chinese
Click to expand...
Click to collapse
The problem currently is that I can not boot into Recovery or Fastboot
swarzB said:
The problem currently is that I can not boot into Recovery or Fastboot
Click to expand...
Click to collapse
Check if the oem option in developer locked again
flairepathos.info said:
Check if the oem option in developer locked again
Click to expand...
Click to collapse
I unlocked it before i started
swarzB said:
I unlocked it before i started
Click to expand...
Click to collapse
When you flash things (usually boot.img) it will lock it again
just check and confirm if its still unlocked
plug in your device and do adb reboot bootloader
flairepathos.info said:
When you flash things (usually boot.img) it will lock it again
just check and confirm if its still unlocked
plug in your device and do adb reboot bootloader
Click to expand...
Click to collapse
unfortunately for me my screen wont come on
Usually Its just stuck in engineer/ edl mode
So not to worry but try flashing using sp tools
Put your phone on charger for now
Then
If your phone not getting recognised by pc, unplug and wait for a 6-10 seconds and plugin again or plug in and hold Power+ Volume down or up button till pc recognises it, this will be handy later
here's a guide to flash via SP tools, or you can follow a youtube video to guide you along step by step
How to Flash Xiaomi Redmi Note 10 Pro Android phone - Easy and Working methods [2022]
Flashing Xiaomi Redmi Note 10 Pro Android phone can be difficult task! But not anymore, flash ROMs on your Xiaomi Redmi Note 10 Pro phone easily with this
flashifyit.com

How To Guide [GUIDE] How To Install A Custom Rom On Redmi Note 11

- Enable Developer Options in your phone by tapping the "MIUI Version" 7 times in About Phone.
- Go to Settings > Additional Settings > Developer Options.
- Enable OEM Unlocking, USB Debugging.
- Also add account in Mi Unlock Status (Can be found in Developer Options).
- Install the required ADB and Fastboot drivers in your PC from here.
- Download Mi Unlock to PC from here, and sign in with your Mi Account.
- Shut down your phone manually, and hold volume down key and power button to enter Fastboot mode.
- Connect your phone to PC using USB cable and click "Unlock" in Mi Unlock Tool. ( disable firewall or allow internet connection for unlocker tool )
- wait for 168 hours
- unlock
- flash twrp
- flash ROM
If you have problems somewhere, please read my thread about redmi note 8 and AICP ( found in my signature ), there you might find some helpful solutions.
dj
Or choose a video tutorial:
Unlock Bootloader: https://yewtu.be/watch?v=p6tZDqzTxHU
Install custom recovery: https://yewtu.be/watch?v=o9nQLFRXkaY
Is tere no official twrp ?
ensarman said:
Is tere no official twrp ?
Click to expand...
Click to collapse
Due to the lack of kernel source code, there is no official TWRP. Only unofficial builds available.
The included version of this post is already very outdated. The most current is 3.7.0, which allows the installation and decryption of A12, A12L and A13 ROMS at the cost of losing support for A11
@
derjango said:
- Enable Developer Options in your phone by tapping the "MIUI Version" 7 times in About Phone.
- Go to Settings > Additional Settings > Developer Options.
- Enable OEM Unlocking, USB Debugging.
- Also add account in Mi Unlock Status (Can be found in Developer Options).
- Install the required ADB and Fastboot drivers in your PC from here.
- Download Mi Unlock to PC from here, and sign in with your Mi Account.
- Shut down your phone manually, and hold volume down key and power button to enter Fastboot mode.
- Connect your phone to PC using USB cable and click "Unlock" in Mi Unlock Tool. ( disable firewall or allow internet connection for unlocker tool )
- wait for 168 hours
- unlock
- flash twrp
- flash ROM
If you have problems somewhere, please read my thread about redmi note 8 and AICP ( found in my signature ), there you might find some helpful solutions.
dj
Or choose a video tutorial:
Unlock Bootloader: https://yewtu.be/watch?v=p6tZDqzTxHU
Install custom recovery: https://yewtu.be/watch?v=o9nQLFRXkaY
Click to expand...
Click to collapse
Did it work flawlessly ???
Which variant Global or Chinese ?
NeoSDAP said:
Due to the lack of kernel source code, there is no official TWRP. Only unofficial builds available.
The included version of this post is already very outdated. The most current is 3.7.0, which allows the installation and decryption of A12, A12L and A13 ROMS at the cost of losing support for A11
Click to expand...
Click to collapse
Can u publish the latest version of twrp here in the thread? would be great!
zsubzwary said:
@
Did it work flawlessly ???
Which variant Global or Chinese ?
Click to expand...
Click to collapse
In my case it worked without any issues
derjango said:
Can u publish the latest version of twrp here in the thread? would be great!
Click to expand...
Click to collapse
Here's my post: https://forum.xda-developers.com/t/...p-3-7-0-for-redmi-note-11-spes-spesn.4507819/
i does not let me flash twrp. error msg is FAILED (status read failed (Too many links)). idk what to do. it will always reboot into system, even is there is no error msg. i tryed diffrent pc's and diffrent cables. its always the same. pls reach out to me, im so desperate T_T my discord is Kaito#8048
icc1412 said:
i does not let me flash twrp. error msg is FAILED (status read failed (Too many links)). idk what to do. it will always reboot into system, even is there is no error msg. i tryed diffrent pc's and diffrent cables. its always the same. pls help T_T
Click to expand...
Click to collapse
Can´t you flash TWRP? Or can´t you flash a custom ROM? as the tittle in the forum says. Provide screenshots.
Thanks for the info, very clear instructions and worked like a charm.
pls someone reach out and help me if possible. my phone became unuseable T_T my discord is Kaito#8048
What is the recommended twrp version for the Note 11 on Android 11? Looks like not everyone is familiar with the issue that the latest twrp versions don't work on A11 phones.
twrp_3.6.1-spes
The link is in the first post.
At which part of the process does it erase your data? Before or after the 7 days? Are there any risks? (on my last phone, Moto G7 Power, after some failed attempts my SIM/IMEI became unusable)
Hyoretsu said:
At which part of the process does it erase your data? Before or after the 7 days? Are there any risks? (on my last phone, Moto G7 Power, after some failed attempts my SIM/IMEI became unusable)
Click to expand...
Click to collapse
After the 7 days (168 hrs), you started the process to unlock bootloader, you'll be able to do it, and after that you unlock the bootloader, the process does format data automatically. From all the numerous Xiaomi devices I owned, I never experienced those things; failed attempts nor loosing IMEI.
i offer 100€ paypal to anyone who can help me make the pixelplusUI rom work on my redmi note 11s my discord is Kaito#8048 find me there
icc1412 said:
i offer 100€ paypal to anyone who can help me make the pixelplusUI rom work on my redmi note 11s my discord is Kaito#8048 find me there
Click to expand...
Click to collapse
It seems, there is no custom ROMs for your device, you may stick to a GSI instead. This is from a quick (not extensive) search.
If I try to unlock bootloader again before the 7-day period ends, will it say how many hours I have left or re-start the counter?
EDIT: For anyone out there, it doesn't mess up the process.
Hyoretsu said:
If I try to unlock bootloader again before the 7-day period ends, will it say how many hours I have left or re-start the counter?
EDIT: For anyone out there, it doesn't mess up the process.
Click to expand...
Click to collapse
Unless you sign out or format data.
after booting TWRP via ADB touchscreen function doesn't work until I reboot the phone. Does anyone faced the same issue if yes than what's the fix?

Categories

Resources