Latest Ufirm QE2 Nougat Firmware For The S7 Edge Only
This well give you a Customizable NonRooted Rom that uses stock boot.img not the eng boot image so there is no lag and it will pass safetynet checks and samsung pay will work
Files To Download
Odin.zip
ADB_Root_G935U_QE2Files.zip
Mega Mirror Link
UFIRM_G935_Odin_Firmware.zip
Mega Mirror Link
FlashFire_Flashable_G935UFirmware.zip
Mega Mirror Link
UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_QE2_V3.zip
These first 2 step must be done first unless you are on my previous version of this rom or my carrier specific rom that do not have root or if your unsure just do this first
This Will Wipe Your Phone
1. Unzip UFIRM_G935_Odin_Firmware.zip and flash all files in odin
2. Go through setup ignore invalid sim message and skip adding accounts
3. Goto Step 3 Below
If you are on one of my previous version of this rom or my carrier specific rom
1. Unzip UFIRM_G935_Odin_Firmware.zip
2. Use odin to flash BL and CP
3. Unzip ADB_Root_G935U_QE2Files.zip
4. Flash EngBoot image with odin
5. Root Phone. Im not going to have half a page about rooting there is an entire rooting thread here. The Eng Boot.img can be found in the UFIRM_QD2_Modified_Nougat_Firmware Folder
6. Unzip FlashFire_Flashable_G935UFirmware.zip
7. Copy AP_FlashFire_Only_G935U_QE2_Firmware.tar.md5 to internal storage of your phone
8. Copy UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_QE2_V3.zip to internal storage of your phone
9. Open FlashFire and click Add Zip and choose UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_QE2_V3.zip make sure to check mount system
10. Now in FlashFire click Add Firmware and choose AP_FlashFire_Only_G935U_QE2_Firmware.tar.md5 select all the partitions
11. Make sure Inject SuperSu is not selected
12. Click Add Wipe and choose Wipe Dalvik Cache and Cache and choose Format Cache Also select wipe SuperSU image. Make sure wipe is at end of flash sequence. The sequence should be AP file first then Zip second and Wipe cache last
13. Now Choose Flash
14. Phone will take Up to 20 minutes to boot
15. Reflashing Zip Will Require Flashing The AP File In FlashFire At The Same Time
16. Do not use Package Disabler Pro if you Choose NoNaMe mods in Aroma
MODS- (NoNaMeRomControl)
3minitbattery
Speed meter
Status bar mods
Center clock
Wifi/signal bar mods
Color change icon mod
Custom backgrounds
Notification drop-down
Incallui background
Gif in notification drop-down
Change/remove carrier names
And much more...
THANKS AND CREDITS
@jds3118 for testing and providing files and bootlooping his phone countless times for me
Gharrington for his awesome 3minitbattery mod...
NoNaMe rom development team for their incredible mods and rom control app...
@malbert16442 for his black themes
Xda for all the great guides to accomplish this...
Kernel source
RomControl Source
Alternate Install Method Using ADB No Root Required. For Verizon Only
Files Needed
UFIRM_QD2_Modified_Nougat_Firmware_Odin_Flashable.zip
ADB_UFIRM_INSTALL_V3.zip
Directions
This Will Wipe Phone Internal Storage
Unzip UFIRM_QD2_Modified_Nougat_Firmware_Odin_Flashable.zip
Reboot phone to stock recovery wipe data from stock recovery reboot back to bootloader
Open Odin connect phone to computer
In BL slot of odin choose BL_G935UUEU4BQD2_CL10860000_QB13199092_REV02_user_low_ship_MULTI_CERT.tar.md5
In AP slot of odin choose AP_Modified_QD2_Nougat_System_Firmware.tar.md5
In CP slot of odin choose CP_G935UUEU4BQD2_CL10860000_QB13199092_REV02_user_low_ship_MULTI_CERT.tar.md5
Leave CSC blank
In odin choose the Pit tab and select pit and choose HERO2QLTE_USA_VZW.pit
Click Flash
Unzip ADB_UFIRM_INSTALL_V3.zip
Once phone is done flashing go through setup skip adding any accounts as you are going to wipe again when done
Once throuh setup reboot phone back bootloader
In AP slot of odin choose AP_Nougat_S7_Edge_EngBoot.tar.md5 flash
You need to do this next part quickly before phone starts bootlooping
In ADB_UFIRM_INSTALL_V3 folder hold shift and right click with in folder and choose Open command window here
Type install.bat press enter when phone is connected and recognized by computer
Follow Directions On command window
During process phone will reboot once please make sure phone is connected and recognized by computer
After procees is done phone will reboot to recovery wipe data and then select reboot to bootloader
In AP slot of odin choose AP_QD2_UFIRM_Boot_Recovery_Image.tar.md5 flash
Phone will take awhile to boot be patient
Awesome job as always. You continue to keep grinding for everyone. I thank you sir.
Sent from my SM-G935U using Tapatalk
I pulled rom zip and I am reuploading it failed md5 I forgot to check sorry if you downloaded
Edit: Rom zip reuploaded
jrkruse said:
Sprint Uses Must be on your rooted stock Firmware before proceeding then follow all other directions from Post 1
ATT and TMO Users must be on Rooted Nougat UFirmware And only need to Flash Rom Zip from Post 1
Click to expand...
Click to collapse
So...rooted stock firmware for Sprint users? And then from what step in post #1 do we start from?
Euronymous88 said:
So...rooted stock firmware for Sprint users? And then from what step in post #1 do we start from?
Click to expand...
Click to collapse
This Ufirm isnt working so great Need Some Testers for this other method
Need to Be On Stock Sprint Rooted Rom
This is sprint files with Ufirm AP file which I assume you have or use the one from the OP
download this
Sprint_Test2.zip
copy it and the Ufirm AP file to phone. In flashfire add zip mount system when it ask
Add firmware choose AP file. Only select system partition not the other 3.
Flash do full wipe in aroma let me know
jrkruse said:
This Ufirm isnt working so great Need Some Testers for this other method
Need to Be On Stock Sprint Rooted Rom
This is sprint files with Ufirm AP file which I assume you have or use the one from the OP
download this
Sprint_Test.zip
copy it and the Ufirm AP file to phone. In flashfire add zip mount system when it ask
Add firmware choose AP file. Only select system partition not the other 3.
Flash do full wipe in aroma let me know
Click to expand...
Click to collapse
Downloading now...I'll let you know how it goes when I have everything up and running. Which AP? The modified one?
Euronymous88 said:
Downloading now...I'll let you know how it goes when I have everything up and running.
Click to expand...
Click to collapse
I Just want you to know this may not boot I have know way of testing so you may have to odin back to stock if it wont boot
jrkruse said:
This Ufirm isnt working so great Need Some Testers for this other method
Need to Be On Stock Sprint Rooted Rom
This is sprint files with Ufirm AP file which I assume you have or use the one from the OP
download this
Sprint_Test.zip
copy it and the Ufirm AP file to phone. In flashfire add zip mount system when it ask
Add firmware choose AP file. Only select system partition not the other 3.
Flash do full wipe in aroma let me know
Click to expand...
Click to collapse
great work As usual. Righ now im Having trouble flashing....it runs aroma but when stars installing some symlink errors show and stops everything, I'm on ATT , after reboot shows stock
Euronymous88 said:
Downloading now...I'll let you know how it goes when I have everything up and running.
Click to expand...
Click to collapse
For first Try I would select stock UI in aroma
fred_yo said:
great work As usual. Righ now im Having trouble flashing....it runs aroma but when stars installing some symlink errors show and stops everything, I'm on ATT , after reboot shows stock
Click to expand...
Click to collapse
This is for sprint not ATT Im working on fixing the Ufirm in OP so it wont bootloop on ATT and Tmobile
jrkruse said:
This is for sprint not ATT Im working on fixing the Ufirm in OP so it wont bootloop on ATT and Tmobile
Click to expand...
Click to collapse
Can enable all langauge on ur rom
mused1985 said:
Can enable all langauge on ur rom
Click to expand...
Click to collapse
Its with what ever comes with the firmware
jrkruse said:
Its with what ever comes with the firmware
Click to expand...
Click to collapse
Most app have all language the only thing is miss in setting and framework.apk.
jrkruse said:
This is for sprint not ATT Im working on fixing the Ufirm in OP so it wont bootloop on ATT and Tmobile
Click to expand...
Click to collapse
I was following your instructions on post #2 and i did just flash the ROM from the op, my bad I reply on the wrong post sorry for that...
mused1985 said:
Most app have all language the only thing is miss in setting and framework.apk.
Click to expand...
Click to collapse
If it was simple I would but its not and especially since SecSettings doesnt come with all languages
fred_yo said:
I was following your instructions on post #2 and i did just flash the ROM from the op, my bad I reply on the wrong post sorry for that...
Click to expand...
Click to collapse
I now its hard to if you have to do full wipe in odin it will be gone but if on failed flash because of something like that try and get me the flashfire log file
jrkruse said:
I now its hard to if you have to do full wipe in odin it will be gone but if on failed flash because of something like that try and get me the flashfire log file
Click to expand...
Click to collapse
here
fred_yo said:
here
Click to expand...
Click to collapse
Did you choose to mount system in flashfire when it asked. I see no symlink errors
Yes, I did and i got the error message, im gonna do it again and try to get a screenshot also
Related
**Suggested** FlashFire - Play BETA - PREVIEW (ROM is also compatible with TWRP).
1. Join the G+ community using the same Google account as you're using for Play on your phone/tablet Here.
2. Sign up to receive the BETA versions from Play Here.
- Use the link provided after sign-up to download the app.
**Caution!** The following process is only for the original Sprint L720 S4 Variant. Use on any other device may result in a hardbrick!
Download:
- L720_OD2_Stock_Rooted_ROM
Set your screen timeout setting to 10 mins before beginning!
1. Place the ROM onto your device (use either internal or ext-sdcard).
2. Open the FlashFire app and "Agree" to the Terms and Conditions.
3. Press "(+)" twice to bring up the "Actions" menu.
4. Press "Wipe" and check all options except "Internal storage" then press the checkmark to continue.
5. Press "(+)" once again and select "Flash Zip or OTA" and locate and select the ROM. Leave "Auto-mount" unchecked under the "Options" menu and press the checkmark to continue.
6. From the main menu "Tap-Hold-Drag" your "Actions" and place them in the following order:
- "Wipe"
- "Flash Zip or OTA"
7. Uncheck all options under "EverRoot" and use default "Reboot" setting.
8. Last, press the lightning bolt then "Ok" to begin the flash.
The screen will turn black then display the contents of your system before beginning the flash. FlashFire will pause for about 1 minute while flashing the "system" partition. Once complete your device will reboot and pause on the Samsung splash screen for about 5 - 7 minutes before completely rebooting. Done!
Tip: for blazing fast speed turn off animations from Developer Options and reboot!
Known Issues:
- Wifi may not function. To resolve the issue...power down (or pull battery) before entering "Download" Mode then Odin flash the modem from Post #2.
Notes:
1. The ROM will update your Modem, Non-hlos, Kernel, System, and Bootloader to OD2 (your recovery will not be updated).
2. The ROM is also compatible with TWRP (Full wipe recommended)!
3. To learn more about FlashFire's capabilities see here: http://forum.xda-developers.com/showpost.php?p=60070810&postcount=2
Alternative Odin Method:
1. Extract the L720_OD2_Pre-Rooted_Firmware.tar from the .rar archive.
2. Pull battery from your device then reinsert and boot into "Download" mode.
3. Uncheck "Auto-Reboot" in Odin and flash the firmware using PDA/AP Slot (depending on your Odin version).
4. Once the flash completes pull the battery again and boot into Recovery, perform a Factory Data Reset then Reboot. Done!
Notes:
1. This method will void your warranty and set your warranty bit to (0x1).
2. This method will update your modem, kernel, and system to OD2 but will not update your bootloader or recovery.
Allow from 5 - 7 minutes for first boot.
Stock - Odin Flashable
Stock - Odin Flashable
- L720V_OD2_Stock_Modem
- L720V_Stock_Recovery
- L720V_OD2_Stock_Kernel
Possible to make a complete firmware, bootloader and modem only (no stock recovery) flashable?
troyboytn said:
Possible to make a complete firmware, bootloader and modem only (no stock recovery) flashable?
Click to expand...
Click to collapse
Yes, its possible.
muniz_ri said:
Yes, its possible.
Click to expand...
Click to collapse
Awesome, those would be flash by Odin in the PDA slot, correct?
troyboytn said:
Awesome, those would be flash by Odin, correct?
Click to expand...
Click to collapse
Yes, but you can also flash with FlashFire.
Great work! Glad to see there are still some developers left for this device!
Just curious - for the modem only, I see it includes non-hlos.bin and mdm.bin. What does apnhlos.bin do, and why is it not included in the modem tar? I also noticed previous modem-only's have not included apnhlos, but I am wondering if we are missing out on added functionality by not keeping that up to date as well?
Thanks.
It is compatible with TWRP, but I assume it isn't compatible with Philz Recovery(CWM), correct?
koivth said:
Great work! Glad to see there are still some developers left for this device!
Just curious - for the modem only, I see it includes non-hlos.bin and mdm.bin. What does apnhlos.bin do, and why is it not included in the modem tar? I also noticed previous modem-only's have not included apnhlos, but I am wondering if we are missing out on added functionality by not keeping that up to date as well?
Thanks.
Click to expand...
Click to collapse
The non-hlos is the lte portion of the modem and you can get away with it on unlocked bootloader devices but still a good practice to have all matching partitions in my opinion.
will flashing this with FlashFire replace a custom recovery with the stock recovery?
Thanks for doing this so fast! Great work!
aypanthony said:
will flashing this with FlashFire replace a custom recovery with the stock recovery?
Thanks for doing this so fast! Great work!
Click to expand...
Click to collapse
Yes it will, but as I understand it, if you use Flashfire, a custom recovery is no longer needed?
aypanthony said:
will flashing this with FlashFire replace a custom recovery with the stock recovery?
Thanks for doing this so fast! Great work!
Click to expand...
Click to collapse
Yes, it will replace your custom recovery with stock OD2.
The idea was to share a way to update to stock, rooted OD2 without first having to Odin back to stock to successfully take the ota.
You can then reflash Twrp after flashing the ROM or continue using FF for flashing zips/backups, etc.
muniz_ri said:
Yes, it will replace your custom recovery with stock OD2.
The idea was to share a way to update to stock, rooted OD2 without first having to Odin back to stock to successfully take the ota.
You can then reflash Twrp after flashing the ROM or continue using FF for flashing zips/backups, etc.
Click to expand...
Click to collapse
This is awesome! I am running a backup right now. I will report back once I have completed the flash.
Thanks!
So I was referenced here by the main thread: http://forum.xda-developers.com/gal...ginal-galaxy-s4-update-zip-od2-t3105607/page5
I rooted a long time ago but went back to stock (through recovery) about a month ago. I'm attempting to update to OD2 but I keep getting error 7. Can I just download this zip and push it via ADB?
monkeychef said:
So I was referenced here by the main thread: http://forum.xda-developers.com/gal...ginal-galaxy-s4-update-zip-od2-t3105607/page5
I rooted a long time ago but went back to stock (through recovery) about a month ago. I'm attempting to update to OD2 but I keep getting error 7. Can I just download this zip and push it via ADB?
Click to expand...
Click to collapse
No, this is ROM and must be flashed with FlashFire if rooted or Twrp.
muniz_ri said:
No, this is ROM and must be flashed with FlashFire if rooted or Twrp.
Click to expand...
Click to collapse
So after flashing with TWRP I will have updated modem and ROM and can simply ODIN TWRP and be ready for business?
clshores said:
So after flashing with TWRP I will have updated modem and ROM and can simply ODIN TWRP and be ready for business?
Click to expand...
Click to collapse
yes
muniz_ri said:
yes
Click to expand...
Click to collapse
And I could then restore my TWRP backup from my current ROM and backup OD2?
clshores said:
And I could then restore my TWRP backup from my current ROM and backup OD2?
Click to expand...
Click to collapse
lol, once you reflash twrp it's twrp....
I can remove the stock OD2 recovery from the ROM so it doesn't overwrite twrp. Thoughts?
muniz_ri said:
lol, once you reflash twrp it's twrp....
I can remove the stock OD2 recovery from the ROM so it doesn't overwrite twrp. Thoughts?
Click to expand...
Click to collapse
If there isn't a benefit to stock recovery (Doesn't sound like it) then I would remove it and simply update the modem and the OS.
**Suggested** FlashFire - Play BETA - PREVIEW (ROM is also compatible with TWRP).
1. Join the G+ community using the same Google account as you're using for Play on your phone/tablet Here.
2. Sign up to receive the BETA versions from Play Here.
- Use the link provided after sign-up to download the app.
**Caution!** The following process is only for the Sprint L720T(Spark) S4 Variant. Use on any other device may result in a hardbrick!
Download:
- L720T_OD2_Stock_Rooted_ROM
- L720T_OD2_Stock_DeOdexed_ROM
Set your screen timeout setting to 10 mins before beginning!
1. Place the ROM onto your device (use either internal or ext-sdcard).
2. Open the FlashFire app and "Agree" to the Terms and Conditions.
3. Press "(+)" twice to bring up the "Actions" menu.
4. Press "Wipe" and check all options except "Internal storage" then press the checkmark to continue.
5. Press "(+)" once again and select "Flash Zip or OTA" and locate and select the ROM. Leave "Auto-mount" unchecked under the "Options" menu and press the checkmark to continue.
6. From the main menu "Tap-Hold-Drag" your "Actions" and place them in the following order:
- "Wipe"
- "Flash Zip or OTA"
7. Uncheck all options under "EverRoot" and use default "Reboot" setting.
8. Last, press the lightning bolt then "Ok" to begin the flash.
The screen will turn black then display the contents of your system before beginning the flash. FlashFire will pause for about 1 minute while flashing the "system" partition. Once complete your device will reboot and pause on the Samsung splash screen for about 5 - 7 (15 - 20 mins for DeOdexed version) minutes before completely rebooting. Done!
Tip: for blazing fast speed turn off animations from Developer Options and reboot!
Known Issues:
- Wifi may not function. To resolve the issue...power down (or pull battery) before entering "Download" Mode then Odin flash the modem from Post #2.
Notes:
1. The ROM's will update your Modem, Non-hlos, Kernel, and System to OD2. Your bootloader and stock recovery will not be updated.
2. The ROM is also compatible with TWRP (Full wipe recommended)!
3. To learn more about FlashFire's capabilities see here: http://forum.xda-developers.com/showpost.php?p=60070810&postcount=2
Credits:
@svadev - for his deodexing tool.
L720T_OD2_Stock_Modem
L720T_OD2_Stock_Kernel
L720T_OD2_Stock_Recovery
L720T_OD2_Bootloader
I was going to wait and Odin a pre-rooted OD2. Now I think I'll go ahead and root my current ROM and use your method above. Thanks!
I am getting a 502 bad gateway error for the links on post 2.
Edit: Nvm it's working now.
And this lets you keep root? I'm coming from rooted stock NC6.
Sunsparc said:
And this lets you keep root? I'm coming from rooted stock NC6.
Click to expand...
Click to collapse
Correct, it also preserves the 4.4 bootloader which allows for downgrading back to kitkat.
I couldn't get wifi to work even after flashing the modem on post 2.
Also it would not recognize my SIM card at all. I've had issues with the SIM on every ROM I use but usually a reboot fixes it. Not in this case.
luzfero said:
I couldn't get wifi to work even after flashing the modem on post 2.
Also it would not recognize my SIM card at all. I've had issues with the SIM on every ROM I use but usually a reboot fixes it. Not in this case.
Click to expand...
Click to collapse
That means the modem did not stick. You have to power down completely or pull battery then reinsert before entering download mode.
Thanks for the rom. I suppose stock means odexed?
Will this ROM wipe user data and apps?
Sorry if this is a dumb question, but should one not flash all the items in post 2? Is that what would happen if you take the over the air update? The notes say
1. The ROM will update your Modem, Non-hlos, Kernel, and System to OD2, and your Bootloader to OA3 (the OA3 Bootloader allows for a full Odin downgrade to OA3)
Click to expand...
Click to collapse
Do you only need to flash the modem seperately because it may not flash properly when flashing the ROM in the steps above?
Kjricker said:
Sorry if this is a dumb question, but should one not flash all the items in post 2? Is that what would happen if you take the over the air update? The notes say Do you only need to flash the modem seperately because it may not flash properly when flashing the ROM in the steps above?
Click to expand...
Click to collapse
Correct, the only item from post2 that you may be required to flash separately is the modem if you have issues with wifi.
This zip doesn't look like a standard flashable zip. Any trick to flash it with TWRP?
shadowcliffs said:
This zip doesn't look like a standard flashable zip. Any trick to flash it with TWRP?
Click to expand...
Click to collapse
No trick, flash like any other ROM after a full wipe.
I currently have the NG5 bootloader. Any pros/cons of the OA3 bootloader?
FivePiece said:
I currently have the NG5 bootloader. Any pros/cons of the OA3 bootloader?
Click to expand...
Click to collapse
No con's of having the OA3
It won't hurt anything
Sent from my SGH-T999 using XDA Free mobile app
Running good so far. I like it but I seem to be missing the wifi calling. Anyone else or is it just me.
Does this have WiFi calling?
esreveR Flash said:
Does this have WiFi calling?
Click to expand...
Click to collapse
The 720T has had wifi calling since NC6. The wifi calling app is in system/priv-app but it's not activated. At least not for me. I pulled the app from the NC6 and tried installing that way as well but that didn't work.
Can you flash modem through flaahfire?
[WARNING]: Use at your own risk. This WILL trip Knox and void your warranty beginning at Step 9.
This is only for the T-Mobile variant. I don't have any other S6 to test this with, so I cannot tell you if it will work for other versions.
Thanks goes to the respective devs for creating the needed files and instructions that I'm simply combining here
Files you'll need:
Odin 3.10.7: http://forum.xda-developers.com/showthread.php?t=2711451
TWRP: https://idlekernel.com/twrp/zeroflte/3.0.2-1/twrp-3.0.2-1-zeroflte.tar.md5 (linking directly to the file gives me a 404 - sorry!)
SuperSU: http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
The ROM: http://forum.xda-developers.com/tmo...20t-android-6-0-1-marshmallow-update-t3356838
Optional:
Xposed: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960 (xposed-v81.0-sdk23-arm64-custom-build-by-wanam-20160411)
and Xposedinstaller_3.0-alpha4.apk (http://forum.xda-developers.com/showthread.php?t=3034811)
How to flash Marshmallow on the Samsung SM-G920T via Odin:
1. Download and install the Samsung drivers
2. Copy SuperSU to your phone (OPTIONAL: Copy Xposed installer .ZIP too)
3. Extract the ROM from the .ZIP file
4. In Windows, run Odin as Administrator
5. Power off phone and put in Download mode (Power+Home+Volume Down)
6. Plug in phone
7. Put the ROM in the AP slot in Odin
8. Click Start
Once flashing is done, the phone will reboot
How to gain root via Odin:
9. In Windows, run Odin as Administrator
10. Power off phone and put in Download mode (Power+Home+Volume Down)
11. Plug in phone
12. Put the TWRP MD5 file in the AP slot
13. Click Start
Once flashing is done, the phone will reboot
14. Power off your phone and boot into Recovery (Power+Home+Volume Up)
15. Navigate to install and choose the file for SuperSU
16. Wipe Cache/Dalvik
17. Reboot
Optional: Installing Xposed
18. Power off your phone and boot into Recovery (Power+Home+Volume Up)
19. Navigate to Install and choose the file for Xposed
20. Wipe Cache/Dalvik
21. Reboot
22. Once you're back in Android, install the Xposed APK and reboot
You can also just skip Steps 16 through 18 and include the file for Xposed at the same time you're installing SuperSU. Just wipe Cache/Dalvik before rebooting.
Don't you have to be Deodexed to flash Xposed? Though I have successfully flashed Xposed on the MM Odexed Stock ROM, I couldn't get any of the modules to work..
I read in a different post regarding issues of OTG support after flashing TWRP. Do you know by chance if this issue has been resolved?
Xposed works on the stock rooted ROM. I'm running XTouchWiz, Burnt Toast, ButteredToast, MinminGuard, BlackList, AdBlocker, XPrivacy and XPrivacy Button.
I haven't tried my OTG with MM yet, but will tonight when I get home from work.
Sent from my SM-G920T using XDA-Developers mobile app
@General_Mayhem,
I'm curious as to know why you're linking an unofficial recovery? TWRP lists 3.0.2-0 as their latest version. Idlekernel does not seem to have a front end page detailing exactly what they're hosting...
Because that was one mentioned in another thread and the one I used. I wrote this up based off what I personally used and did. It's not just a regurgitation of accumulated information.
Sent from my SM-G920T using XDA-Developers mobile app
I have a G920T that I am using on cricket. If I flash this, will it compromise my service?
Thanks
I came from having a Nexus device, now I use the s6. Why can't I just odin flash the BL and radio and then twrp flash an s6 MM ROM?
solido888 said:
I have a G920T that I am using on cricket. If I flash this, will it compromise my service?
Thanks
Click to expand...
Click to collapse
From the original post:
This is only for the T-Mobile variant. I don't have any other S6 to test this with, so I cannot tell you if it will work for other versions.
DroneDoom said:
I came from having a Nexus device, now I use the s6. Why can't I just odin flash the BL and radio and then twrp flash an s6 MM ROM?
Click to expand...
Click to collapse
You probably could - if I had links to those individually and cared to update this post to include those.
Mods - please close this thread. I didn't intend this to be come a support thread, just a how-to.
Thanks.
General_Mayhem said:
You probably could - if I had links to those individually and cared to update this post to include those.
Mods - please close this thread. I didn't intend this to be come a support thread, just a how-to.
Thanks.
Click to expand...
Click to collapse
Sorry about that, was just trying to get a second opinion.
DroneDoom said:
Sorry about that, was just trying to get a second opinion.
Click to expand...
Click to collapse
Honestly, no worries. I'm not on here a lot anymore and can't devote any time to answering questions. I felt closing the thread was the best way to keep from being queried when I can't always give a prompt response.
General_Mayhem said:
From the original post:
This is only for the T-Mobile variant. I don't have any other S6 to test this with, so I cannot tell you if it will work for other versions.
Click to expand...
Click to collapse
It is the T-Mobile variant. It is unlocked though, and I am using it on cricket.
Hello.. When going to download the xposed file i didnt see the 81 version only the xposed-v83.0-sdk23-arm64-custom-build-by-wanam-20160423.zip. Is this the updated file that i need?
Thanks!!
Maddball said:
Hello.. When going to download the xposed file i didnt see the 81 version only the xposed-v83.0-sdk23-arm64-custom-build-by-wanam-20160423.zip. Is this the updated file that i need?
Thanks!!
Click to expand...
Click to collapse
v83 is the updated version. It'll work fine.
Hello, I'm trying to follow your steps but when I try to flash the ROM FRP Lock message stop it...
I tried flash original ROM but It says "device does not have DRK...", when I try to instal the DRK FRP Lock again and so on...
Have you any recomendation??
THANKS!!!!!!!!!!!
When flashing twrp via odin it passes thru odin but when i reboot into recovery it didnt stick
Sent from my SM-N920W8 using XDA-Developers mobile app
Im still on Lolipop with the leaked bootloader.
Will this still work? or do i have to put the stock booloader back?
dvazriel said:
Im still on Lolipop with the leaked bootloader.
Will this still work? or do i have to put the stock booloader back?
Click to expand...
Click to collapse
stock
Not working
Sent from my SM-G920T using XDA Free mobile app
Latest T-Mobile QF6 Nougat FirmwareGive this guy @umaro some thanks he worked on this until it became reality even when I gave up
T-Mobile S7 Edge Can Be Found Here
This rom will give you a modded nonrooted rom that will pass safetynet checks with working samsung pay. No lag because stock boot.img is used
Files To Download
TMO_G930_Odin_Firmware.zip
FlashFire_Flashable_G930T_Firmware.zip
TMO_FLAT_HYBRID_PLAYSTORE_BS_FREE_NoNaMe_QF6_V4.zip
ADB_Root_Flat_Files.zip
This will wipe your phone
1. Unzip TMO_G930_Odin_Firmware.zip use odin and flash these files
2. Go through setup unzip ADB_Root_Flat_Files.zip flash eng boot.img with odin then root
3. Unzip FlashFire_Flashable_G930T_Firmware.zip and copy the AP_FlashFire_Only_G930_QF6_Firmware.tar.md5 file to your phone
4. Copy TMO_FLAT_HYBRID_PLAYSTORE_BS_FREE_NoNaMe_QF6_V4.zip to your phone
5. Use flashfire choose add zip and choose TMO_FLAT_HYBRID_PLAYSTORE_BS_FREE_NoNaMe_QF6_V4.zip make sure to mount system
6. Then click add firmware and choose the AP_FlashFire_Only_G930_QF6_Firmware.tar.md5 file you copied to your phone. Select all partitions
7. Do not inject SuperSU
The flash order should be AP firmware then the rom zip
8. Click Flash
9. In aroma choose full wipe
First boot will take 10+ minutes too boot
Playstore Mods fixed
MODS- (NoNaMeRomControl)
3minitbattery
Speed meter
Status bar mods
Center clock
Wifi/signal bar mods
Color change icon mod
Custom backgrounds
Notification drop-down
Incallui background
Gif in notification drop-down
Change/remove carrier names
And much more...
Bugs:
Do Not Use Package Disabler Or AdHell If You Choose NoNaMe Mods
Volume Panel Sliders Have A Bug With NoNaMe Mods
THANKS AND CREDITS
@jds3118 for testing and providing files and bootlooping his phone countless times for me
Gharrington for his awesome 3minitbattery mod...
NoNaMe rom development team for their incredible mods and rom control app...
@malbert16442 for his black themes
Xda for all the great guides to accomplish this...
RomControl Source
I recommend everyone put the Flashfire AP zip and Rom Zip on your internal storage as the AP file is so large that it may not be read properly do too limitations of some SD Cards. When you select AP file in Firmware there should be 4 partitions that are selected. If not then you have a bad download or need to have AP file on internal storage
Outstanding work. Thank you for this amazing rom.
jrkruse said:
This rom will give you a modded nonrooted rom that will pass safetynet checks with working samsung pay. No lag because stock boot.img is used
Click to expand...
Click to collapse
Thanks jrkruse for this , very much appreciated!
I just noticed your 930t post just now so I am very grateful and about to flash it.
I am currently on the previous ROM that you posted which is for the edge.
I had heavy lag after rooting due to the eng boot.img flashed on odin but after tinkering with L Speed, it's been much faster .
I'm going to do it over again using the 930t files you posted but I have a question if possible you can answer...
When you mention above thar there is no lag because stock boot.img is used... Does that only refer to the rom being flashed and not rooted ? Because of course the eng boot.img I need to flash on odin is necessary to be able to acquire root and this would leave me in the end with lag due to having to flash that eng boot img. ..
im hoping I'm wrong..
is there a way to flash in odin the eng boot, acquire root , and then flash back the stock boot.img and perhaps leaving me rooted and on a stock lag free boot.img ?
I read through the entire edge thread and other places and was hoping a solution but It may not be possible or I'm just missing something obvious? I'd rather not deal with tweaking using lspeed or kernel auditor etc. But if rooting only possible way is to be stuck with the eng boot img i guess I'll take the risk..
Thanks again !:good:
suddene said:
Thanks jrkruse for this , very much appreciated!
I just noticed your 930t post just now so I am very grateful and about to flash it.
I am currently on the previous ROM that you posted which is for the edge.
I had heavy lag after rooting due to the eng boot.img flashed on odin but after tinkering with L Speed, it's been much faster .
I'm going to do it over again using the 930t files you posted but I have a question if possible you can answer...
When you mention above thar there is no lag because stock boot.img is used... Does that only refer to the rom being flashed and not rooted ? Because of course the eng boot.img I need to flash on odin is necessary to be able to acquire root and this would leave me in the end with lag due to having to flash that eng boot img. ..
im hoping I'm wrong..
is there a way to flash in odin the eng boot, acquire root , and then flash back the stock boot.img and perhaps leaving me rooted and on a stock lag free boot.img ?
I read through the entire edge thread and other places and was hoping a solution but It may not be possible or I'm just missing something obvious? I'd rather not deal with tweaking using lspeed or kernel auditor etc. But if rooting only possible way is to be stuck with the eng boot img i guess I'll take the risk..
Thanks again !:good:
Click to expand...
Click to collapse
Following The directions will get you a nonrooted custom rom that can be manipulated by adb such as deleting stuff or pushing files to system and will pass safetynet checks. If you want a rooted rom it means you have to have the eng boot.img. If you root the rom and and only flash back stock boot.img you will not have root but as soon as you flash back eng boot.img you will have root again. but doing this breaks safetynet
Is it possible to delete the TMO boot sound with adb?
sabresfan said:
Is it possible to delete the TMO boot sound with adb?
Click to expand...
Click to collapse
See this post
Modded systemui volume panel fixed. Must flash AP file with rom
TMO_FLAT_HYBRID_PLAYSTORE_BS_FREE_NoNaMe_QF6_V4.zip
jrkruse said:
Modded systemui volume panel fixed. Must flash AP file with rom
TMO_FLAT_HYBRID_PLAYSTORE_BS_FREE_NoNaMe_QF6_V4.zip
Click to expand...
Click to collapse
Thank you for your continued support for us on the S7 flat.
I'm having issue playing video through flash player. For example, I can play youtube video through youtube app fine however if I play it through chrome or samsung browser is does this weird loop at any position in time of the video. Let me know if anyone else is having this issue. I installed rom but didn't install any of the mod of the mods. Wanted as close as stock possible. PS I did tried with mod and didn't like it and reflashed without mods.
Thanks in advance.
gundamdx said:
I'm having issue playing video through flash player. For example, I can play youtube video through youtube app fine however if I play it through chrome or samsung browser is does this weird loop at any position in time of the video. Let me know if anyone else is having this issue. I installed rom but didn't install any of the mod of the mods. Wanted as close as stock possible. PS I did tried with mod and didn't like it and reflashed without mods.
Thanks in advance.
Click to expand...
Click to collapse
It's the dual speaker mod try without that and all will work
@jrkruse,
Thanks. That is indeed the culprit. Reinstall rom without mods and remove system app through adb. Liking it. Thanks for all your efforts.
I am stuck in a bootloop when I install the stock kernel, but with the eng kernel it runs fine. Any ideas?
playingbball20 said:
I am stuck in a bootloop when I install the stock kernel, but with the eng kernel it runs fine. Any ideas?
Click to expand...
Click to collapse
Reread OP and post 2 you skipped something
Hi, nice work!, I have a quick question, can I install the rom without the mods? I just want to have root. If its possible, what steps I need to skip?
Thanks
ManuEZ said:
Hi, nice work!, I have a quick question, can I install the rom without the mods? I just want to have root. If its possible, what steps I need to skip?
Thanks
Click to expand...
Click to collapse
You can root but why not just root a stock Rom if you want no mods
Which file is the engboot.image?
DHackley said:
Which file is the engboot.image?
Click to expand...
Click to collapse
It's in the adb zip
Geizerjin said:
so this Rom has Modded Playstore? can i push modded apk thru adb with this rom?
Click to expand...
Click to collapse
The whole Rom is a customized stock nonrooted Rom. PlayStore and BSFree were my signature roms back in the day.
Playstore= almost all Samsung apps replaced with google apps that are found on the play store
BSFree= Highly debloated Rom with Samsung apps
NoNaMe= Systemui mods from that Rom.
You can choose whatever you want on install
My walkthrough
For amateurs like me, I put together some more detailed instructions. I hope this provides help for some users. Following the below steps I had no issues, it works great, and is very speedy. If there are any issues with my steps PLEASE correct me! I'm doing my best to contribute, not the opposite!
Thanks jrkruse, @umaro, and all others for this! So far I'm loving it!
My Steps:
1) ODIN (PC program) https://www.androidfilehost.com/?fid=24591023225177749
a. Setup:
-Make sure you have latest device drivers setup on your PC
-Enable USB Debugging on phone
-Boot phone into Download/Odin Mode: Turn off your device and press and hold Power button + Volume Down + Home. When you see the warning screen press Vol UP. Phone should say "Downloading..."
-Connect USB from PC to phone. ID:COM in Odin should turn Blue with a COM port
b. Unzip TMO_G930_Odin_Firmware.zip & select the (4) files from this zip (BL,AP,CP,CSC) in ODIN. Make sure all (4) get populated & selected
c. Options: Only these should be selected: Auto Reboot and F.Reset Time
d. Select START
e. When you get a green PASS! message in Odin, that means firmware has successfully been installed. Be patient as first boot may take a while
f. Exit ODIN
2) Phone Setup: After phone restarts for 1st time, go through setup as normal. (Ignore different carriers logos and SIM warnings)
3) ODIN: Restart phone back into Download/ODIN mode. Unzip ADB_Root_Flat_Files.zip, select ONLY AP_Nougat_S7_Flat_EngBoot.tar.md5, select START & wait for it to finish & restart phone
4) Gain Root:
a. Once phone comes back up, unzip ADB_Root_Flat_Files\Nougat_S7_Root_2_82_All_Carriers_V2.zip & Run root.bat. This will restart phone
b. After phone restarts, press key to continue install. I used options 2 & 1. Wait for phone to restart again. Should have root now.
5) FLASHFIRE/AROMA (App is now installed on phone via root script)
a. Unzip FlashFire_Flashable_G930T_Firmware.zip & copy unzipped file to your phone. Copy TMO_FLAT_HYBRID_PLAYSTORE_BS_FREE_NoNaMe_QF6_V4.zip to your phone. NOTE: Copy to internal memory NOT SD card.
b. Open FlashFire app on phone.
c. Choose + button, Flash ZIP, select TMO_FLAT_HYBRID_PLAYSTORE_BS_FREE_NoNaMe_QF6_V4.zip, select Mount /system option, touch checkmark button
d. Choose + button, Click add firmware & select AP_FlashFire_Only_G930_QF6_Firmware.tar.md5. Select all partitions, touch checkmark button
e. The flash order should be: Flash firmware package, then Flash ZIP. Everroot disabled. FLASH! Phone will restart into Aroma installer.
f. When phone comes up after script, select WIPE ALL DATA. (First boot will take 10+ minutes too boot)
---------- Post added at 07:45 PM ---------- Previous post was at 07:38 PM ----------
Curious (and looking to identify different tweak options), would I need to go through ALL the steps again in order to access the Flashfire/Aroma setup to pick different setups, like PlayStore or NoNaMe? Or is there a shortcut I could take?
Latest Ufirm QE2 Nougat Firmware For The S7 Edge Only
This well give you a Customizable NonRooted Rom that uses stock boot.img not the eng boot image so there is no lag and it will pass safetynet checks and samsung pay will work
Give this guy @umaro some thanks he worked on this until it became reality even when I gave up
Files To Download
Odin.zip
ADB_Root_G935U_QE2Files.zip
Mega Mirror Link
UFIRM_G935_Odin_Firmware.zip
Mega Mirror Link
FlashFire_Flashable_G935UFirmware.zip
Mega Mirror Link
UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_QE2_V3.zip
These first 2 step must be done first unless you are on my previous version of this rom or my carrier specific rom that do not have root or if your unsure just do this first
This Will Wipe Your Phone
1. Unzip UFIRM_G935_Odin_Firmware.zip and flash all files in odin
2. Go through setup ignore invalid sim message and skip adding accounts
3. Goto Step 3 Below
If you are on one of my previous version of this rom or my carrier specific rom
1. Unzip UFIRM_G935_Odin_Firmware.zip
2. Use odin to flash BL and CP
3. Unzip ADB_Root_G935U_QE2Files.zip
4. Flash EngBoot image with odin
5. Root Phone. Im not going to have half a page about rooting there is an entire rooting thread here. The Eng Boot.img can be found in the UFIRM_QD2_Modified_Nougat_Firmware Folder
6. Unzip FlashFire_Flashable_G935UFirmware.zip
7. Copy AP_FlashFire_Only_G935U_QE2_Firmware.tar.md5 to internal storage of your phone
8. Copy UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_QE2_V3.zip to internal storage of your phone
9. Open FlashFire and click Add Zip and choose UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_QE2_V3.zip make sure to check mount system
10. Now in FlashFire click Add Firmware and choose AP_FlashFire_Only_G935U_QE2_Firmware.tar.md5 select all the partitions
11. Make sure Inject SuperSu is not selected
12. Click Add Wipe and choose Wipe Dalvik Cache and Cache and choose Format Cache Also select wipe SuperSU image. Make sure wipe is at end of flash sequence. The sequence should be AP file first then Zip second and Wipe cache last
13. Now Choose Flash
14. Phone will take Up to 20 minutes to boot
15. Reflashing Zip Will Require Flashing The AP File In FlashFire At The Same Time
16. Do not use Package Disabler Pro if you Choose NoNaMe mods in Aroma
MODS- (NoNaMeRomControl)
3minitbattery
Speed meter
Status bar mods
Center clock
Wifi/signal bar mods
Color change icon mod
Custom backgrounds
Notification drop-down
Incallui background
Gif in notification drop-down
Change/remove carrier names
And much more...
THANKS AND CREDITS
@jds3118 for testing and providing files and bootlooping his phone countless times for me
Gharrington for his awesome 3minitbattery mod...
NoNaMe rom development team for their incredible mods and rom control app...
@malbert16442 for his black themes
Xda for all the great guides to accomplish this...
Kernel source
RomControl Source
I recommend everyone put the Flashfire AP zip and Rom Zip on your internal storage as the AP file is so large that it may not be read properly do too limitations of some SD Cards. When you select AP file in Firmware there should be 4 partitions that are selected. If not then you have a bad download or need to have AP file on internal storage
You are a big @jrkruse and I love what you build I will install it in a couple of hours I will return thanks
Sent from my SM-G935T using XDA-Developers Legacy app
Can there will be a stock android custom rom?
---------- Post added at 08:23 AM ---------- Previous post was at 08:22 AM ----------
Thanks for your work ?
Hey man! Awesome that you've got a ufirm rom thread here too.. now I don't have to go to the verizon forums
umaro said:
Hey man! Awesome that you've got a ufirm rom thread here too.. now I don't have to go to the verizon forums
Click to expand...
Click to collapse
I just updated all the OP's of the Ufirms I forgot to give you a shoutout for your work. Thanks again I am sure Tmobile and ATT people will agree. Even gave the Flat Tmobile and ATT some new roms to play with
Gohar___Nadeem said:
Can there will be a stock android custom rom?
---------- Post added at 08:23 AM ---------- Previous post was at 08:22 AM ----------
Thanks for your work
Click to expand...
Click to collapse
Not sure what your asking. But yes there is a custom stock tmobile rom as well
Sorry for my bad english....
I'm asking that!
Like lineage Os ,resurrection remix any of that kind rom will be available for t-mobile in future?
Gohar___Nadeem said:
Sorry for my bad english....
I'm asking that!
Like lineage Os ,resurrection remix any of that kind rom will be available for t-mobile in future?
Click to expand...
Click to collapse
Probably not
I've tried to install twice so far. Both times I make it as far as Aroma installer getting to "Wiping Data" then phone reboots to Splash screen and just sits. Doesn't make it to boot animation. Tried rebooting, then booting to recovery and wiping cache, then tried factory reset, but nothing helped.
Are there any things I should avoid in Aroma options?
radoo7701 said:
I've tried to install twice so far. Both times I make it as far as Aroma installer getting to "Wiping Data" then phone reboots to Splash screen and just sits. Doesn't make it to boot animation. Tried rebooting, then booting to recovery and wiping cache, then tried factory reset, but nothing helped.
Are there any things I should avoid in Aroma options?
Click to expand...
Click to collapse
Did you flash the Verizon Odin files first. Then root. The flashfire AP and Rom zip
jrkruse said:
Did you flash the Verizon Odin files first. Then root. The flashfire AP and Rom zip
Click to expand...
Click to collapse
Yup, I did everything exactly as listed. Since there was no directions for Aroma, I was wondering if I was picking a wrong option there. I choose full wipe, TMo stock kernel, modded ui, but it always fails at Wipe when it starts to install.
radoo7701 said:
Yup, I did everything exactly as listed. Since there was no directions for Aroma, I was wondering if I was picking a wrong option there. I choose full wipe, TMo stock kernel, modded ui, but it always fails at Wipe when it starts to install.
Click to expand...
Click to collapse
So you never get through aroma installer?
jrkruse said:
So you never get through aroma installer?
Click to expand...
Click to collapse
I get thru the options, then hit install. Installer starts at Wipe, the my phone just reboots to Splash screen the nothing. 3rd try I picked No Wipe and still same thing.
Downloading TMobile version to try that one tomorrow.
radoo7701 said:
I get thru the options, then hit install. Installer starts at Wipe, the my phone just reboots to Splash screen the nothing. 3rd try I picked No Wipe and still same thing.
Downloading TMobile version to try that one tomorrow.
Click to expand...
Click to collapse
Are you choosing to mount system when you choose the rom zip with flashfire
jrkruse said:
Are you choosing to mount system when you choose the rom zip with flashfire
Click to expand...
Click to collapse
Yup. To the best of my knowledge I've followed every step exactly. It may be possible I have a bad download. My internet has been acting up. I'll try again later after I talk with my service provider tomorrow. Thanks
radoo7701 said:
Yup. To the best of my knowledge I've followed every step exactly. It may be possible I have a bad download. My internet has been acting up. I'll try again later after I talk with my service provider tomorrow. Thanks
Click to expand...
Click to collapse
Could you tell me each mod you chose so I can see if I can recreate the problem. Also is te AP and zip on your phone storage or sdcard
Edit:Also ceck the md5 of your download
jrkruse said:
Could you tell me each mod you chose so I can see if I can recreate the problem. Also is te AP and zip on your phone storage or sdcard
Click to expand...
Click to collapse
I picked full wipe, TMo stock kernel, modded ui, NoName boot animation. Most of the S8 apps and custom debloat. I tried the dual speaker mod the first 2 times but not the 3rd.
Both files are on my sdcard.
radoo7701 said:
I picked full wipe, TMo stock kernel, modded ui, NoName boot animation. Most of the S8 apps and custom debloat. I tried the dual speaker mod the first 2 times but not the 3rd.
Both files are on my sdcard.
Click to expand...
Click to collapse
Do you remember what you chose in custom debloat. I just want to run your same config and try. I would check that md5 use and md5 checker program then check it against Android file host generated md5 for file. If its bad there is no need in doing all this
jrkruse said:
Do you remember what you chose in custom debloat. I just want to run your same config and try. I would check that md5 use and md5 checker program then check it against Android file host generated md5 for file. If its bad there is no need in doing all this
Click to expand...
Click to collapse
I don't remember exactly. One of the times I just chose the minimal debloat option (70 apps, I think)
Anyway, I'll have to try again tomorrow after work.