Hello Dear Fellows,
Before few days my HTC One X9 dropped and screen got damaged so I ordered Touch Screen Digitizer + LCD Display Assembly for HTC One X9 OEM and replacement done local service technician so now display is good but problem in touch screen/tapping issue sometimes typing is not good please let me know it's solution why it's behaving like this as it seems fitting is good but still facing typing problem.
any idea what's the issue and how to solve it?
Thanks in advanced.
Related
Today i called hTC about fixing the keypad problem, having the top left cornor uplifted from a bad installment, and found out that hTC warranty doesn't cover hardware failure's or malfunction which i found ****ing rediculous... Also called them about the yellow tint on my 2nd diamond and they said they can't do anything about it, but they could swap the screen out for 163 dollar, and swap the keypad out for 132 dollar.... anyone having problems with this ****?
My first touch diamond had the yellow tint and my operator sent me a new diamond with the button problem as they sooner repaired.
Count me in...I called HTC to fix my oil-like film in the middle of the screen while my phone is still under warranty. They refused to do anything about it or even acknowledge that the phone is defected. Can someone provide a phone or email to higher up chain of command to get it fix?
my G1 was destroyed in a crash, so I buy new plastics+keybord+slider (all plastic parts) to assemble the hardware in the new cover.
All is going well, but after the boot I notice that the touchscreen is unusable... if I touch the screen it begin to slide or press random points that I didn't touch, for some seconds...
The touchscreen is going crazy!!
I tried to open again the G1, reconnect the cables of screen/touchscreen and restart android.. but I have the same issue..
What the hell is happening?
The touchscreen panel seems ok, it doesn't have deep scratches, and it seems that the fall has not damaged visually the touchscreen.
It is a link problem or touchscreen, or what??? Someone know?
I don't know what to do.. buy a new touchscreen for 20€?? I spent 20€ for the plastic, if I don't solve I would change device.. but the qwerty device in europe are not so good
I'm waiting for milestone3, or a samsung/HTC qwerty device with dual core and screen> 3.7"
Please help I don't want to bury my G1
EDIT:
I found this video that show a similar issue on the motorola milestone.
It is really similar to my isssue..
http://www.youtube.com/watch?v=_PNuXREuDxA
I'm thinking that perhaps touching the back of the touch panel I spoiled something, or something like that (perhaps I have to clean the back of touch panel with somthing?)
I'm going to try something, all reply are appreciated.
I find solution (hope)
The problem is the bus cable of touchscreen that is damaged.
I bought a new cable, I hope to solve this problem.
Sorry for this useless thread
Hi,
On my MDA compact IV I have te recalibrate my screen often.
When I have calibrated the screen, it can be I have to recalibate it after 2 or 3 houres. If I dont calibrate it again I get problems, for example if I touch on a send button on the screen It tries to call someone because the call button is below the send button...even sometimes it doesnt even respond at all....
In this topic: http://forum.xda-developers.com/showthread.php?t=1001105 I saw there is a reg edit possible for the calibration of the screen, but its for another phone (touch HD). Does anyone know if there's a regedit for the mda compact to solve this weird problem? Or do I need to replace some parts of the phone?
Greetings.
Hi,
This also happened to me. I had to recalibrate it more and more often until the touchscreen died completely. I've bought the touchscreen and LCD together on ebay are replaced the screen. Beware - do not buy digitizer only, the digitizer and lcd are glued together, and one can not remove touch screen without breaking LCD.
Cheers
Tomek
yes hello, big headaches here, bricked a g1 then got a hold of another g1 with cosmetic issues to use the motherboard, this new one was locked, so i unlocked it (using the trackball tho so i dont know if it also had a touchscreen issue to begin with)took the motherboard out of it and put it in my old g1 that i know for a fact had no touch screen issues, and now the touch screen is completely unresponsive in my original g1, so i took the mother board out again put it back in the one it came out of, and its touch screen is also completely unresponsive, my question is can the motherboard be the reason a touch screen isnt working? if so how and why?
also, the mother board i swapped works in my original g1, it has a signal, takes me to the touch the green android symbol to begin set up, also does this is the cosmetically challenged one i bought but neither one has any response to touch.
any help i would really appreciate.
thank you,
john.
hi i am new and just bought htc hd7 recently. The touchscreen "p" key not working?!! try app like test broken pixel indeed its damage. any guide how can i change the digitiser?