I was in clockwork and then accidentally formatted my system now I can't reboot to Clockwork what do I do I still have access to default recovery menu but nothing else phone won't even boot
reflash Z3c LP or MM firmware with Flashtool or install any rom from sd card that does not require unlocked BL. If you have unlocked BL you can try other roms available like LOS, Carbon etc. For any custom rom you'll have to read the install instructions carefully or you might softbrick your device
https://eu.dl.twrp.me/z3c/ - Download the latest image file
https://forum.xda-developers.com/showthread.php?t=2317790 - Download and install
Place img file in the fastboot folder
turn off device, start it in fastboot mode (Power + Vol +)
run application
type: fastboot flash recovery [image name].img
start in recovery mode (Power + Vol -)
Related
I have fixed the bug in some Android One roms that prevented you from booting into recovery.
You can now boot into recovery by holding volume + and power button.
** You can still not unlock bootloader in fastboot, volume buttons is disabled for this function **
Please download X510-A1-FIX-20150824.7z from here and extract.
Make sure you have SP Flash Tool to continue.
-------------------------------------------------
Install Android One Rom
-------------------------------------------------
1. Open SP Flash Tool and click on the Format Tab and then press the Start button.
2. Once complete disconnect your usb cable and re insert it again.
3. Click on Download tab and load the MT6580_Android_scatter.txt scatter file from the extracted archive.
4. Click the Download button.
5. Once complete you can boot as normal or proceed to install TWRP Recovery
-------------------------------------------------
Install TWRP Recovery
-------------------------------------------------
If you would like TWRP recovery installed please replace recovery.img inside the extracted folder with recovery-twrp.img before flashing.
*** Don't forget to rename recovery-twrp.img to recovery.img ***
Once the recovery.img has been replaces with the TWRP Recovery image please follow the above instructions again.
-------------------------------------------------
ROOT
-------------------------------------------------
If you would like to be rooted please boot into TWRP recovery after flashing TWRP Recovery by holding volume + and power button
Once the TWRP recovery open it will ask you if you want if you want to use TWRP as read only.
To root we need read and write access so please proceed to write to system.
Once in TWRP recovery press Reboot and then press Bootloader and then you will be prompted to install root.
Once booted into fastboot please reboot the phone.
Are we still get OTA after install this ROM ?
Can you explain what is work in this ROM, because when i want to unlock bootloader the button didn't work
ArticK said:
Are we still get OTA after install this ROM ?
Can you explain what is work in this ROM, because when i want to unlock bootloader the button didn't work
Click to expand...
Click to collapse
I am not sure about OTA yet, maybe for OTA it will overwrite recovery and must do the process again.
Well before the android one rom you could not boot into recovery by holding vol + and power.
Unfortunately during the bootloader unlock process you cannot use the volume button.
anarchtic said:
I am not sure about OTA yet, maybe for OTA it will overwrite recovery and must do the process again.
Well before the android one rom you could not boot into recovery by holding vol + and power.
Unfortunately during the bootloader unlock process you cannot use the volume button.
Click to expand...
Click to collapse
It is mean this ROM only resolve for boot into recovery by holding vol + and power but not for vol button when unlock bootloader process asking confirmation yes/no .
I think you should noted in OP what is work in this ROM .
ArticK said:
It is mean this ROM only resolve for boot into recovery by holding vol + and power but not for vol button when unlock bootloader process asking confirmation yes/no .
I think you should noted in OP what is work in this ROM .
Click to expand...
Click to collapse
yes your right, and I will edit
anarchtic said:
I have fixed the bug in some Android One roms that prevented you from booting into recovery.
You can now boot into recovery by holding volume + and power button.
** You can still not unlock bootloader in fastboot, volume buttons is disabled for this function **
Please download X510-A1-FIX-20150824.7z from here and extract.
Make sure you have SP Flash Tool to continue.
-------------------------------------------------
Install Android One Rom
-------------------------------------------------
1. Open SP Flash Tool and click on the Format Tab and then press the Start button.
2. Once complete disconnect your usb cable and re insert it again.
3. Click on Download tab and load the MT6580_Android_scatter.txt scatter file from the extracted archive.
4. Click the Download button.
5. Once complete you can boot as normal or proceed to install TWRP Recovery
-------------------------------------------------
Install TWRP Recovery
-------------------------------------------------
If you would like TWRP recovery installed please replace recovery.img inside the extracted folder with recovery-twrp.img before flashing.
*** Don't forget to rename recovery-twrp.img to recovery.img ***
Once the recovery.img has been replaces with the TWRP Recovery image please follow the above instructions again.
-------------------------------------------------
ROOT
-------------------------------------------------
If you would like to be rooted please boot into TWRP recovery after flashing TWRP Recovery by holding volume + and power button
Once the TWRP recovery open it will ask you if you want if you want to use TWRP as read only.
To root we need read and write access so please proceed to write to system.
Once in TWRP recovery press Reboot and then press Bootloader and then you will be prompted to install root.
Once booted into fastboot please reboot the phone.
Click to expand...
Click to collapse
Pls boss I did not understand the procedure to root..u said when we click on reboot in twrp recovery we should den press bootloader and den it will prompt us to root.
Which button do I press to for the bootloader
i installed the rom from the mentioned link above, however , now when i press volume + & power, i go into a wired recovery, an image of an open android with red exclatmation mark with no text, no choices or nothing,
the reason i wanted recovery is to flash marshmallow on my 2gb ram x510, now there is nothing any clue ?
small problems make depressed
excuse all .
I was new here . and want to learn .
I have a problem with hot android 2 me.I can not enter into TWRP menu by turning off my android , and menghidupkanya by pressing a few buttons such as Vol +/- buttons with power button . no reaction .
is there any other way? or non- root application that can go directly to TWRP .
the position of an existing room in marshmallows , I want to root my android .:angel::angel::angel:
I worked all the steps but the device does not respond and the program does not do anything happens
What is the solution device does not work
I can't download the x510 rom. When I click on the download link, it takes me to Google Drive where I find 'Empty Folder' message. Please help.
How how boot into twrp custom recovery mode using infinix hot 4 lite, someone please help....
Dragunz said:
How how boot into twrp custom recovery mode using infinix hot 4 lite, someone please help....
Click to expand...
Click to collapse
What?
i have a symphony roar a50 (Bangladesh). it was running everything stock and updated with twrp 2.8.7.0 without root. bootloader was unlocked.
i was trying to root the device with the AIO from this thread:
http://forum.xda-developers.com/cro.../android-one-toolkit-unlocks-relocks-t3294448
the phone suddenly rebooted in the middle of the process and was stuck in a bootloop. i tried to factory reset it but it still didn't work. was still on boot loop.
then i tried to flash the appropriate stock firmware but that didn't help it wont boot. stuck on the boot logo for 1.5 hrs. then tried CM13 nightlies and the cyanpop roms. still nothing.
i am currently in a state of shock as this is a fairly a new phone and i am to travel to Chittagong in ~11 hours.
please help
don't you take a backup ?
and don't you wipe every thing before flashing the cm13 ?
mithun mpk said:
don't you take a backup ?
and don't you wipe every thing before flashing the cm13 ?
Click to expand...
Click to collapse
yes i had a nandroid backup. but twrp says it is corrupt or some reason. and yes i wiped everything before cm13
downgrade twrp2.8.7 to 2.8.4.... 2.8.7 has problem with backup and recovery
https://www.androidfilehost.com/?fid=24389512218018336 twrp 2.8.8.x beta 3
btw this thread is wrong section
I too Had the same Problem once as I Tried Rooting My Android One through the same method as u did, So for fixing it I prefer that U FLASH The Stock MM ROM for Ur Device through STOCK Recovery ( Remember to Wipe Cache and Data b4 Flashing ) AND then ur Device mst be Fixed ( This method worked for me ) And Dude if u want to root Ur Device Follow This Method : -
1) FLASH TWRP RECOVERY
2) Reboot into Recovery and FLASH Thunderzap 5.1 Kernel through Recovery
3) Then FLASH SUPERSU ZIP from Recovery
4) Reboot And Done ! Ur Device is Rooted ! ?
@RoxAndroid how did you fallback to stock recovery from twrp? I'm stuck.
Tanzim Abir said:
@RoxAndroid how did you fallback to stock recovery from twrp? I'm stuck.
Click to expand...
Click to collapse
So......to do that Follow these Steps :-
Download Stock Recovery from here http://forum.xda-developers.com/crossdevice-dev/android-one-general/stockrecoveryandroid-one-t2917457
1) Make sure u have Installed ADB drivers ( If Already did, Skip Step 2)
2) To install ADB drivers first Unable USB debugging From the developer Options in the Setting ( If there is No Developer Options Goto-Setting-About Phone-Tap Build Number 7 Times and go back to settings and Open Developer Options and Unable USB debugging) And then Connect Your Phone to PC and Open ADB DRIVER executable File And Install Drivers.
3) Once Drivers are installed Download ADB AND FASTBOOT from here http://drive.google.com/file/d/0B1nu6Ydzrmi-dWdmS00tWjE1WHM
4)Extract the zip and open the folder and then HOLD SHIFT+Right Click and then click on Open Command Window here
5)And then boot your phone to Fastboot Mode, To do that Power Off the Device and HOLD POWER AND VOLUME UP key at the same time and then navigate to the Fastboot Mode by Volume UP button and and Click Volume Down button to select. Once you are in Fastboot Mode connect your Device to PC and go back to PC
6)Once Command Window is opened type following Command :-
Code:
fastboot devices
Code:
fastboot oem unlock
Code:
fastboot format userdata
Code:
fastboot flash recovery <Name of the Recovery in ur PC>
Code:
fastboot boot <Name of the Recovery in ur PC>
6) DONE ! STOCK RECOVERY IS FLASHED and Remember to keep Stock Recovery img file in the ADB AND FASTBOOT FOLDER
Thanks I'll try this asap currently on a train..
Okay.. I've shipped it to the customer care. They said I'll have to wait 3 days for it to get back. I'll report back then.
Thank you everyone for your input.
Closed as this has run its course.
Hi everyone,
My Xperia V LT25i cannot enter TWRP recovery mode.
I tried (VolDwn + Pwr) and (VolUp + Pwr) when it's off.
I also tried (adb reboot recovery) and (Boot to Recovery option in QuickReboot App) when it's on.
No luck entering TWRP.
The LED blinked in white for an instance then the phone just went on a normal booting.
This looks like a simple silly question but I have seriously dug into all the similar threads I can find and still no solutions.
Current status of my phone:
Model: LT25i
Android Ver.: 4.3
Firmware: 9.2.A.0.295
Bootloader unlocked: YES (checked by *#*#7378423#*#*)
Rooted: YES (rooted by towelroot and checked by Root Checker Basic)
TWRP installed: YES (flashed twrp-3.0.2-0-tsubasa.img into my phone using App Install Method)
The status of TWRP is not checked since I am not sure whether there's a way to do so.
I opened the app, made a recovery.img and saw it there under my sdcard folder (this means that TWRP is normally functioning right?).
My phone is in extremely good health, not bricked.
I just wanted to try the fantastic ROM StryFlex™ Marshmallow for Xperia V,
following the instructions step by step and got stuck at TWRP.
Please help and thanks for your time reading this thread
if it works like my Xperia Z you can try to put your Xperia T on fastboot. Then rename the TWRP.img to boot.img.
Then in plat-form tools folder open the terminal and type "fastboot flash boot boot.img". After that "fastboot reboot". After that the phone reboots automatically into TWRP
Ricky_Karmator said:
if it works like my Xperia Z you can try to put your Xperia T on fastboot. Then rename the TWRP.img to boot.img.
Then in plat-form tools folder open the terminal and type "fastboot flash boot boot.img". After that "fastboot reboot". After that the phone reboots automatically into TWRP
Click to expand...
Click to collapse
Hello,
Thanks for replying.
This method works perfectly. The device booted into TWRP.
But now I am facing the question that it wouldn't boot back to system @@.
Am I suppose to do the "fastboot flash boot boot.img" command again and flash back normal boot.img? (If yes, where can I find one?)
Or did I mess something up while flashing StryFlex™ ROM in TWRP?
Thanks for your time reading this thread!
It seems the default bootloader of this phone doesn't support entering recovery by press volumn button. Pressing volumn buttons on powering up is only functional when the phone is connected to PC, moreover, vol up+power will boot into fastboot mode, vol down+power will boot into flashmode which works with flashtool.
---------- Post added at 01:46 AM ---------- Previous post was at 01:25 AM ----------
if you are using stock rom, you should do the following steps to enter twrp:
1. Get flashtool ready on PC, and the drivers for your phone;
2. Connect your phone to PC;
3. Power up your phone by pressing vol up+power button to enter into fastboot mode;
4. In flashtool, flash twrp.img with fastboot flash mode;
5. reboot your phone, and it will boot into twrp;
6. when you want to get back to android, pull the kernel.sin out from FTF corresponds to your rom, and flash it in the same way while flashing twrp.img;
7. reboot your phone.
loudnut said:
Hello,
Thanks for replying.
This method works perfectly. The device booted into TWRP.
But now I am facing the question that it wouldn't boot back to system @@.
Am I suppose to do the "fastboot flash boot boot.img" command again and flash back normal boot.img? (If yes, where can I find one?)
Or did I mess something up while flashing StryFlex™ ROM in TWRP?
Thanks for your time reading this thread!
Click to expand...
Click to collapse
Be sure to download the right type of TWRP that supports booting system after you flash your custom ROM. Mine for example lets me flash Stryflex and after is automatically replaced by the standard one but nothing affects the stability of the ROM.
So you should check on TWRP official site the recovery, rename it into "boot.img", flash it though cmd and then restart in recovery. Do a clean flash (check also the repartition of data), flash ROM + Gapps and then reboot.
It works on my Xperia Z and also another Xperia T from a friend
I had Resurrection rom installed in my K3 note and needed to sell the phone. So performed a complete wipe of the internal storage and tried to install AICP rom later (TWRP), it shows flashed successfully, but whenever I am booting my phone, it always boots to recovery only. Downloaded the SP flash tool to go back to stock rom with stock firmware, but as soon as I plug my phone woth my laptop with the USB cable, (which is switched off at this moment) after clicking the download option in the SP Flash tool, it just again boots back to recovery and the stock firmware's download never happens because my phone has booted into recovery. So i guess no use of SP Flash tool too.
I am able to connect my phone to my laptop and can see my internal storage and i can transfer files too.
Any help,?
Current rom flashed via TWRP - AICP v4.2 and Gapps micro (arm 64, pico) (Still stuck in booloop to TWRP only )
I am having the same issue! I've selected to restore factory settings and bam, it boots only to TWRP, I've tried to flash it with new rr rom (09.2017) but it is without any improvement still TWRP.
I think I'll try to do things like I did when changing it from stock model.
My phone TWRP-looped many times. The solution is actually easy.
1. Reflash using SPFlashtool ONLY the stock recovery
2. boot into stock recovery
3. choose english > press reboot phone
4. phone will reboot into rom without problemos
5. reflash TWRP
cheers
or
1. Copy stock recovery.img into sdcard
2. In twrp, select Install and navigate to where you put stock recovery.img
3. Press install image. Then, Select recovery.img. Slide to install
4. boot into stock recovery
5. choose english > press reboot phone
6. phone will reboot into rom without problemos
7. reflash TWRP
DONE
what button combination to boot into fastboot
Hi
Whats the key communication to boot into fastboot to flash recovery image ?
Currently, having only stock recovery with no os installation.
Did you get the solution?
I gave reboot phone and the phone is stuck into an infinite restart.
Arjunism said:
My phone TWRP-looped many times. The solution is actually easy.
1. Reflash using SPFlashtool ONLY the stock recovery
2. boot into stock recovery
3. choose english > press reboot phone
4. phone will reboot into rom without problemos
5. reflash TWRP
cheers
or
1. Copy stock recovery.img into sdcard
2. In twrp, select Install and navigate to where you put stock recovery.img
3. Press install image. Then, Select recovery.img. Slide to install
4. boot into stock recovery
5. choose english > press reboot phone
6. phone will reboot into rom without problemos
7. reflash TWRP
DONE
Click to expand...
Click to collapse
1. Unlock your bootloader.
2. Install trwp recovery (lalleman .net/HTC_M8S%28QL_UL%29/Recovery/)
3. Do all wipes. Don't wipe only a SD Card. Go to Advanced -> Power off
4. Go to Fastboot USB mode
5. Install the stock recovery and then relock the bootloader (" fastboot oem relock " command)
6. Do wipes in stock recovery. (then it will stock in the boot loop, but you can power off it. Just press the power and volume-up buttons.
7. Download v.1.6.401 firmware (ruu and 0PKVIMG).
8. Rename 0PKVIMG_m8_UL_QL*****.zip to 0PKVIMG.zip, and then place it on your flash card to the root directory.
9. Go to HBOOT (volume down + power). When your phone will suggest installing firmware. Press volume UP.
10. If it will not install -> Try again
11. Install the RUU 1.6
Links:
RUU - ruu .lalleman .net/HTC_M8S%28QL_UL%29/RUU/
0PKVIMG - ruu .lalleman .net/HTC_M8S%28QL_UL%29/Firmware%20%28Expert%29/Firmware%20Crypted%20%28Original%20HTC%29/
Stock recovery (i use this) - drive .google .com/open?id=11j0-a0a21pKtesyQOmY7x1LRyr_a0ZVG