my device is in bootloop and i cant enter into twrp, all i can do is i can enter into fastboot mode and i cant do noithing because usb debugging is not enable, is there any way to enter into twrp? please help
ibrahimkhan said:
my device is in bootloop and i cant enter into twrp, all i can do is i can enter into fastboot mode and i cant do noithing because usb debugging is not enable, is there any way to enter into twrp? please help
Click to expand...
Click to collapse
I'd recommend you to turn off your device and flash ZUI via QFIL. Then unlock bootloader and flash TWRP and whatever ROM you want.
ZUI 2.1.049 QFIL
Bootloader unlock on zui
Borja Viera said:
I'd recommend you to turn off your device and flash ZUI via QFIL. Then unlock bootloader and flash TWRP and whatever ROM you want.
ZUI 2.1.049 QFIL
Bootloader unlock on zui
Click to expand...
Click to collapse
i have already unlock my bootloader and installed twrp, my power button not working so i just want to enter into twrp. i can enter into fastboot mode but my debug is not enable
ibrahimkhan said:
i have already unlock my bootloader and installed twrp, my power button not working so i just want to enter into twrp. i can enter into fastboot mode but my debug is not enable
Click to expand...
Click to collapse
Can you use any commands in fastboot mode or are you completely blocked?
Borja Viera said:
Can you use any commands in fastboot mode or are you completely blocked?
Click to expand...
Click to collapse
yeah my device detected in fastboot mode and i try something like adb recovery reboot and its say no device emulator things. i also use that zuk z1 toolkit and reboot recovery option and its not working
ibrahimkhan said:
yeah my device detected in fastboot mode and i try something like adb recovery reboot and its say no device emulator things. i also use that zuk z1 toolkit and reboot recovery option and its not working
Click to expand...
Click to collapse
Create a folder and insert a twrp file (for example twrp.img). Then type fastboot boot TWRP.img . If it allows you to do that then you'll get into TWRP. This will probably won't work, so I think the only thing is left is to repair that power button to make an installation via QFIL.
Borja Viera said:
Create a folder and insert a twrp file (for example twrp.img). Then type fastboot boot TWRP.img . If it allows you to do that then you'll get into TWRP. This will probably won't work, so I think the only thing is left is to repair that power button to make an installation via QFIL.
Click to expand...
Click to collapse
ok thanks you very much for your time
ibrahimkhan said:
my device is in bootloop and i cant enter into twrp, all i can do is i can enter into fastboot mode and i cant do noithing because usb debugging is not enable, is there any way to enter into twrp? please help
Click to expand...
Click to collapse
Connect to pc and type the command fastboot reboot recovery.
Download the all in one tool provided in our forums.. It has an option to reboot to recovery and it can also flash the stock image as well.. Let us know.. Will help you resolve your problem
Related
Hey I cannot get into recovery mode, I don't really know why. This morning everything was ok: I rebooted my phone into recovery mode as usually, with no problems. THEN I rebooted my phone from the custom recovery, and then my phone went to bootloop: The bootloader screen went to black, then to my lockscreen and then to the bootloader screen, then to my lockscreen... etc. (bootloop)
I rebooted into recovery again and tried to do a normal wipe, because usually that's everything I need. But nothing happened: bootloop again.
So, I went to recovery once more to perform a full wipe and erase the data. Then I tried to flash CM13 and the Gapps, but nothing happend. Now, I cannot get into recovery, I'm stuck in the TWRP screen.
Help?
Sorry my bad english
My phone isn't rooted. I just unlock the bootloader
I had the same problem
It's easy just flash a newer version of Twrp using ADB fastboot from PC = problem solved
Thanks! Can you guide me step by step?
[email protected]!# said:
It's easy just flash a newer version of Twrp using ADB fastboot from PC = problem solved
Click to expand...
Click to collapse
I just flash a new version of TWRP and even the latest version of CWM but nothing, same problem. Bootloop in recovery's logo.
I asked to someone else in my city but they told me that the problem it's the motherboard
Cuervoazulado said:
Hey, thanks. Can you guide me step by step? I don't really know hpw to do that, so I don't want to make a mess.
Thanks, so much thanks!
Click to expand...
Click to collapse
Download newer twrp: https://dl.twrp.me/titan/
Download and install Minimal ADB and Fastboot Tool http://forum.xda-developers.com/showthread.php?t=2317790, install Motorola drivers from Motorola website: https://motorola-global-portal-de.custhelp.com/app/answers/detail/a_id/91819.
Paste the new recovery image into the Minimal ADB and Fastboot folder, reboot your device in fastboot mode (vol down+pwr), open Minimal ADB &Fastboot folder, hold shift, right click inside the folder and open a command window there. Type
Code:
fastboot devices
If your device is connected you'll see a string of numbers/letters. Type "fastboot flash recovery name-of-new-recovery.img", for example:
Code:
fastboot flash recovery twrp-3.0.0-0-titan.img
.
Type
Code:
fastboot reboot
.
You´re done.
Wolfcity said:
Download newer twrp: https://dl.twrp.me/titan/
Download and install Minimal ADB and Fastboot Tool http://forum.xda-developers.com/showthread.php?t=2317790, install Motorola drivers from Motorola website: https://motorola-global-portal-de.custhelp.com/app/answers/detail/a_id/91819.
Paste the new recovery image into the Minimal ADB and Fastboot folder, reboot your device in fastboot mode (vol down+pwr), open Minimal ADB &Fastboot folder, hold shift, right click inside the folder and open a command window there. Type
Code:
fastboot devices
If your device is connected you'll see a string of numbers/letters. Type "fastboot flash recovery name-of-new-recovery.img", for example:
Code:
fastboot flash recovery twrp-3.0.0-0-titan.img
.
Type
Code:
fastboot reboot
.
You´re done.
Click to expand...
Click to collapse
Thanks bro, but I just tried that, even changing the recovery for CWM, but nothing happened. I'm still stuck. The screen blinks with the recovery logo.
I have no system, so... Maybe I'm totally bricked. I don't really know if I can flash some ROM with the fastboot
Cuervoazulado said:
Thanks bro, but I just tried that, even changing the recovery for CWM, but nothing happened. I'm still stuck. The screen blinks with the recovery logo.
I have no system, so... Maybe I'm totally bricked. I don't really know if I can flash some ROM with the fastboot
Click to expand...
Click to collapse
Forget it bro, you gave me the right version of the recovery. Now I can get into it So much thanks!
I want to flash custom recovery in my phone but it shows
remote: command not allowed
In bootloader, it shows that it is unlocked.
i get the same error when I type
fastboot oem devices-info
remote: command not allowed
I tried
fastboot oem unlock XXXXXXX(huawei code)
and it shows my phone already unlocked
and I tried
fastboot oem relock XXXXXXX
it shows
remote root type is risk
and I tried
fastboot oem lock
it shows
remote command not allowed
The recovery is still Huawei e-recovery, it asked me to download the update but it always failed when it comes to download package.
What should I do now?
hjaxuan said:
I want to flash custom recovery in my phone but it shows
remote: command not allowed
In bootloader, it shows that it is unlocked.
i get the same error when I type
fastboot oem devices-info
remote: command not allowed
I tried
fastboot oem unlock XXXXXXX(huawei code)
and it shows my phone already unlocked
and I tried
fastboot oem relock XXXXXXX
it shows
remote root type is risk
and I tried
fastboot oem lock
it shows
remote command not allowed
The recovery is still Huawei e-recovery, it asked me to download the update but it always failed when it comes to download package.
What should I do now?
Click to expand...
Click to collapse
Connect to pc, issue unlock command, then
Fastboot flash recovery xxxxx.img
Where xxxxx is the name of custom recovery file. Take a picture of the error, if any and share here
muradulislam said:
Connect to pc, issue unlock command, then
Fastboot flash recovery xxxxx.img
Where xxxxx is the name of custom recovery file. Take a picture of the error, if any and share here
Click to expand...
Click to collapse
as i said, it shows that the phone already unlocked.
I able to flash the recovery successfully but when i tried to boot my recovery
it will show
remote command not allowed
hjaxuan said:
as i said, it shows that the phone already unlocked.
I able to flash the recovery successfully but when i tried to boot my recovery
it will show
remote command not allowed
Click to expand...
Click to collapse
To boot your recovery, disconnect from pc, press and hold power, vol up until a reboot, let go of power but keep the other pressed for about 5,6 sec more.
muradulislam said:
To boot your recovery, disconnect from pc, press and hold power, vol up until a reboot, let go of power but keep the other pressed for about 5,6 sec more.
Click to expand...
Click to collapse
Even though I had flash the recovery, when i enter recovery mode using this method, it is still showing huawei e recovery
hjaxuan said:
Even though I had flash the recovery, when i enter recovery mode using this method, it is still showing huawei e recovery
Click to expand...
Click to collapse
Did you disconnect it from PC before pressing and holding power, Vol up?
Just making sure...
muradulislam said:
Did you disconnect it from PC before pressing and holding power, Vol up?
Just making sure...
Click to expand...
Click to collapse
Yes and it show the fastboot
It shows that Phone Unlocked in red colour and FRP unlocked
hjaxuan said:
Yes and it show the fastboot
It shows that Phone Unlocked in red colour and FRP unlocked
Click to expand...
Click to collapse
And power + vol down also boots to fastboot mode?
If this is the case then I am of no help to you at all. Another user is facing the same problem and no solution there till now.
hjaxuan said:
Yes and it show the fastboot
It shows that Phone Unlocked in red colour and FRP unlocked
Click to expand...
Click to collapse
Phone off, disconnect cable to PC, vol+ and power - enter to recovery
DRUGER said:
Phone off, disconnect cable to PC, vol+ and power - enter to recovery
Click to expand...
Click to collapse
Yes I managed to enter huawei e recovery, the problem is i wan to flash the recovery but it show
remote command not allowed
hjaxuan said:
Yes I managed to enter huawei e recovery, the problem is i wan to flash the recovery but it show
remote command not allowed
Click to expand...
Click to collapse
Try to unlock bootloader again using
Fastboot OEM unlock xxxxxxxxxxxxxxxx
And then try flashing twrp again using
Fastboot flash recovery2 xxxxxx.img
muradulislam said:
Try to unlock bootloader again using
Fastboot OEM unlock xxxxxxxxxxxxxxxx
And then try flashing twrp again using
Fastboot flash recovery2 xxxxxx.img
Click to expand...
Click to collapse
I tried
fastboot oem unlock XXXXXXX
and it shows my phone already unlocked
and I tried
fastboot oem relock XXXXXXX
it shows
remote root type is risk
and I tried
fastboot oem lock XXXXXX
it shows
remote command not allowed
hjaxuan said:
I tried
fastboot oem unlock XXXXXXX
and it shows my phone already unlocked
and I tried
fastboot oem relock XXXXXXX
it shows
remote root type is risk
and I tried
fastboot oem lock XXXXXX
it shows
remote command not allowed
Click to expand...
Click to collapse
Just try
Fastboot OEM unlock xxxxxx
Followed by
Fastboot flash recovery xxxxxx.img
Many users reported that this worked. Don't do anything in between.
hjaxuan said:
Yes I managed to enter huawei e recovery, the problem is i wan to flash the recovery but it show
remote command not allowed
Click to expand...
Click to collapse
build number your firmware???
druger said:
build number your firmware???
Click to expand...
Click to collapse
nem-l22c636b140
hjaxuan said:
nem-l22c636b140
Click to expand...
Click to collapse
You may put screenshot comand line whith comand flashboot
Also try this TWRP https://drive.google.com/file/d/0B1Ez6wAY1mj6c0xxaTBUWmZVN1k/view?usp=sharing (Chinese)
Huawei E-Recovery is a secondary recovery. Try adb reboot recovery.
Sent from my honor 5X using XDA Labs
DRUGER said:
build number your firmware???
Click to expand...
Click to collapse
U don't have proper drivers installed.
Hi all ! I had exactly the same issue... The problem was solved by using the TWRP-CN image pointed by Druger ! (thank you mate) Any other attempt resulted into a fail. Twrp is of course in chinese language but follow this, and your life will be a bed of roses : youtube.com/watch?v=KOhR92EKD7A
Hope this will help
Note : Chinese NEM-AL10 2gigs ram model.
Huawei honor 5c
Can somebody help me my huawei (5c) i tried to install twrp on phone and it say command is not allowed. Im unlocked bootloader, i writed adb reboot bootloader, adb fastboot flash recovery xxxx.img and then it says command not allowed. Ps my file name is twrp and i try twrp.img on flashing
Hi guys, i need some help, i wanted to convert my A2 in 6X, and i need to enter edl mode to do this. Because i couldn't enter edl via fastboot or adb (i had unlocked bootloader ad twrp recovery installed) i tried to relock bootloader (maybe this was the error), now i'm stuck at message that says that system is corrupt and devices wouldn't boot, i can only access fastboot, tried to boot twrp via fastboot but didn't work, fastboot getvar unlocked return no, now i'm trying to follow the guide to unbrick from ARB but phone should be in edl mine is in fastboot, please help me, any suggestion is accepted! Thanks
https://forum.xda-developers.com/mi-a2/how-to/mi-a2-toolkit-unlock-bootloader-root-t3834585
use option 5 then select the second option
it will boot the device into edl mode.
if you have issues with it not letting you enter it with this then try to unlock the bootloader again.
Daha3ker said:
https://forum.xda-developers.com/mi-a2/how-to/mi-a2-toolkit-unlock-bootloader-root-t3834585
use option 5 then select the second option
it will boot the device into edl mode.
if you have issues with it not letting you enter it with this then try to unlock the bootloader again.
Click to expand...
Click to collapse
already did it, didn't work, unlocking bootloader gave me error: oem unlock is not allowed.
i menage to enter edl mode using test point method, after that i flashed latest rom, and phone booted up, but i turned off to reassable it, and when i tried to reboot it it went to edl mode and i cannot exit edl mode, my pc see it like QUALCOMM9008 and if i try to flash with miflash it does the flash but i can't bot it after flashing success. i'm trying now to download an older fastboot rom
Hello . A few minutes ago, I had a problem with the TWRP flashing on my huawei p8 gra-ul00 phone .the adb has command's the twrp is complety flashed on my phone , but it did not come up on my phone(after pressing vol+ and power button's the phone will automatiocally go to huawei erecovery). But I took a little initiative and came up with a solution to this problem. I'm share this.
NOTICE : IF YOU HAVEN'T A USB DATA CABLE , PLEASE BUY IT , OTHERWISE CONTINUING THE STEPS WILL NOT SOLVE YOUR PROBLEM .
Before completing all the steps, connect the phone to the computer using data usb cable, then try to enter the recovery mode (for Huawei phones, hold the power button simultaneously with the volume down button for at least one minute.) If the phone Entered custom recovery, no need to do other steps.
1_First Of All , Unlock the bootloader , then reboot the phone
2_Download the custom recovery . IF YOU HAVE ISN'T A CUSTOM RECOVERY FOR YOUR PHONE , PLEASE SEND A COMMENT AND ENTER YOU PHONE MODEL AND A NAME OF THE CUSTOM RECOVERY YOU WANT TO USE TO IT. IM WILL SEND A REGUESTED CUSTOM RECOVERY FOR YOU IN LESS THAN A HOUR .
3_connect the phone to computer and Enable USB Debugging from Developer Options(go to settings>about phone , then 7 times tap on build number , then go back to settings and select developer options , search for "USB Debugging" Option and enable it.)
4_, install the adb and fastboot drivers(such as minimal adb and fastboot) then install the phone drivers . after installing drivers , reboot the computer , then open cmd and enter the command : adb reboot recovery
5_if a window showed on phone(such as allow usb debugging) , click on yes and retry the level 4 again
If you have any questions or problems , commend here.
Hy Bysoft!
I'm new in XDA but i alredy flash some devices with TWRP, it seems that something went wrong with the installation of twrp. Did you try to boot into bootloader (adb reboot bootloader) and then flash the TWRP image with fastboot (fastboot flash recovery twrp.img) and then type fastboot reboot?
I find that list of command: adb reboot etc.. in your device page of TWRP (https://twrp.me/huawei/huaweip8.html). In this site you find the TWRP image for your device, you have to use this image when you flash with fastboot (fastboot flash recovery twrp.img where twrp.img is the image that you downloaded in TWRP site).
PrintHelloPeople
PrintHelloPeople said:
Hy Bysoft!
I'm new in XDA but i alredy flash some devices with TWRP, it seems that something went wrong with the installation of twrp. Did you try to boot into bootloader (adb reboot bootloader) and then flash the TWRP image with fastboot (fastboot flash recovery twrp.img) and then type fastboot reboot?
I find that list of command: adb reboot etc.. in your device page of TWRP (https://twrp.me/huawei/huaweip8.html). In this site you find the TWRP image for your device, you have to use this image when you flash with fastboot (fastboot flash recovery twrp.img where twrp.img is the image that you downloaded in TWRP site).
PrintHelloPeople
Click to expand...
Click to collapse
Hello .
I am also a newcomer
it's true . I also installed TWRP 3.1.1 on the phone in the same way
Thanks for sharing your opinion with me and other XDA users
Regards ,
so i downgraded my redmi note 10s to 12.5 global but after I flashed I can't get it to fastboot mode
I was planning to install PE so when I try to enter fastboot mode through adb/hold volume - and power button
it just restart, no fastboot mode
Give it a try with the adb command and Debug USB enabled
adb reboot bootloader
zSyntex said:
Give it a try with the adb command and Debug USB enabled
adb reboot bootloader
Click to expand...
Click to collapse
I tried it already but it just restarted
abusidhique said:
I tried it already but it just restarted
Click to expand...
Click to collapse
Probably fastboot partition is gone
I'll try to get to recovery directly and flash the stock again
Let me know
zSyntex said:
Probably fastboot partition is gone
I'll try to get to recovery directly and flash the stock again
Let me know
Click to expand...
Click to collapse
how do I get to recovery directly I am new to this
abusidhique said:
how do I get to recovery directly I am new to this
Click to expand...
Click to collapse
Same way, change bootloader to recovery
adb reboot recovery
zSyntex said:
Same way, change bootloader to recovery
adb reboot recovery
Click to expand...
Click to collapse
thanks, bro I will try that