Database Develop

back to stock recovery

Hry guys. Since miui is not for me. How do i revert back to the stock recovery so i can use the updates? Cheers

deepsnoozer said:
Hry guys. Since miui is not for me. How do i revert back to the stock recovery so i can use the updates? Cheers
Click to expand...
Click to collapse
Hi,
You have to flash stock recovery via ADB. Only image 1 not 2. Than you can easy flash a stock rom via dload Method.
All you need is here:
http://forum.xda-developers.com/asc...26-to-b133-t2888976/post55708921#post55708921
Sent from my HUAWEI P7-L10 using XDA Free mobile app

87insane said:
Hi,
You have to flash stock recovery via ADB. Only image 1 not 2. Than you can easy flash a stock rom via dload Method.
All you need is here:
http://forum.xda-developers.com/asc...26-to-b133-t2888976/post55708921#post55708921
Sent from my HUAWEI P7-L10 using XDA Free mobile app
Click to expand...
Click to collapse
The easy way is to flash with flashify! Download it from playstore, put your stock recovery on sd card- start flashify and flash recovery.

Superwitschi said:
The easy way is to flash with flashify! Download it from playstore, put your stock recovery on sd card- start flashify and flash recovery.
Click to expand...
Click to collapse
Only flash recovery.img with flashify?
Not flash recovery2.img?

yes only the recovery.img!!!!

Superwitschi said:
yes only the recovery.img!!!!
Click to expand...
Click to collapse
Ok thanks...

Dear all. Iam back to stock thabk you so much. Oh btw i used abd

deepsnoozer said:
Dear all. Iam back to stock thabk you so much. Oh btw i used abd
Click to expand...
Click to collapse
Mate, please describe how you did it with ADB in detailed

radostorm said:
Mate, please describe how you did it with ADB in detailed
Click to expand...
Click to collapse
Standard doing....
Sent from my HUAWEI P7-L10 using XDA Free mobile app

radostorm said:
Mate, please describe how you did it with ADB in detailed
Click to expand...
Click to collapse
The same way you have flashed TWRP.

DJ BlackEagle said:
The same way you have flashed TWRP.
Click to expand...
Click to collapse
Hi,
I need help... I'm trying to go back to stock recovery & firmware, I have already tried everything and I'm absolutely fustrated:crying::crying::crying:
1.- I had TWRP recovery and MIUI, the phone (ASCEND P7-L10) is rooted
2.- After downloading flashify and the stock recovery, I have installed the stock recovery, everything OK.
3.- Rebbot into recovery and when I try to wipe data and/or cache it says:
data wipe completed (or cache wipe completed)
huawei cust fail
If I try to install any ROM B120, B126, B133, B135... I always get the same error, "cust fail"
If I reboot the phone still has MIUI... but I need to restore to factory recovery/firmware...
Help needed, I'm going to hit the roof...
thanks in advance!

Put your original firmware on dload in sd card, flash original recovery with fastboot or flashify, shut down your phone. Now press power volume- and volume+ ! This will install the original firmware.

siasegos said:
...
3.- Rebbot into recovery and when I try to wipe data and/or cache it says:
data wipe completed (or cache wipe completed)
huawei cust fail
...
Click to expand...
Click to collapse
Read my tutorial but additionaly in point 4. you must flashing also cust.img by Fastboot (make command: Fastboot flash cust cust.img) It always working.

Ziolek67 said:
Read my tutorial but additionaly in point 4. you must flashing also cust.img by Fastboot (make command: Fastboot flash cust cust.img) It always working.
Click to expand...
Click to collapse
Before reading your post I've been doing some test and after flashing boot.img sotck firmware has been installed, but I still have cust fail error.
Now I have read your tuto but where I can download cust .img??
Many thanks for your help

siasegos said:
Before reading your post I've been doing some test and after flashing boot.img sotck firmware has been installed, but I still have cust fail error.
Now I have read your tuto but where I can download cust .img??
Many thanks for your help
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2920167

Thanks, already flashed again recovery , boot and cust
Now forcing update vol+ vol- power
we'll see. Anyway, thanks a lot!

siasegos said:
Now I have read your tuto but where I can download cust .img??
Many thanks for your help
Click to expand...
Click to collapse
Use only original stock cust.img extracted from stock ROM. I always do it in this order:
1. Download mode and flashing stock recovery
2. Recovery mode and wipe (both option)
3. Download mode and flashing cust.img
4. Recovery mode and wipe (both option)
5. If still error go download mode and flash:
cust.img, cache.img, userdata.img, system.img
6. Recovery mode and wipe (both option)
I had many times this error while reverting my B135 after MIUI ROM.

Ziolek67 said:
Use only original stock cust.img extracted from stock ROM. I always do it in this order:
1. Download mode and flashing stock recovery
2. Recovery mode and wipe (both option)
3. Download mode and flashing cust.img
4. Recovery mode and wipe (both option)
5. If still error go download mode and flash:
cust.img, cache.img, userdata.img, system.img
6. Recovery mode and wipe (both option) .
Click to expand...
Click to collapse
Well, after flashing again recovery, boot, cust and forcing an update... I get the same fuc**** error, mm... As you have told me, I guess I do not have the right files for my Vodafone Spain P7-L10
I'm going to look for the right firmware, thanks a lot!!!
==== SEVERAL ATTEMPS LATER AND SOME HOURS LATER... SOLVED!!! ====
I've made svarious attemps with diferent ROMs, B126 and B121, while I was downloading original stock ROM from Huawei.
All of these attemps have failed, even flashing cache, userdata and system
But after downloading original stock rom, as soon as I have flashed cust everything started to work perfectly, wipes... firmware...
So, THAAAAANKS A LOOOOOOOT!

Superwitschi said:
Put your original firmware on dload in sd card, flash original recovery with fastboot or flashify, shut down your phone. Now press power volume- and volume+ ! This will install the original firmware.
Click to expand...
Click to collapse
hi i have the same problem, if i put my 133 d load in my sd card, the phone go however in twrp...
there is a way to install d load or a firm stock from twrp?

I did it!
I've finally did it!
Huawei has released an official downgrade ROM (B603) here (russian site):
http://download-c.huawei.com/download/downloadCenter?downloadId=38601&version=66144&siteCode=ru
You'll also need this official EMUI 3.0 recovery image:
https://mega.co.nz/#!ZZ9QxIiL!Cn4mV2ZG2zzFc956CoWQh4BnBQqyK4rClghlY8CoXQk
As well as fastboot/ADB (platform tools) files here:
https://www.androidfilehost.com/?fid=9390355257214632011
Now here's how you do it.
Copy the dload folder (found in ROM) to the root of your SD Card
Now turn off your phone
While off press and hold Vol Down & Power Key, when screen turns on release Power Key, but keep holding the Vol Down key until you see a white screen (fastboot mode)
Now decompess files from platform tools to a new folder called ADB on your desktop for example
Hold down Shift and right click on ADB folder on your Desktop and choose "run command windows here", a little black window should pop up
Now type:
fastboot devices - this is to check if your phone is correctly detected (if not, then drivers are needed. Just install HiSuite)
fastboot flash recovery stockEMUI3.0RECOVERY.img
fastboot reboot
Your phone will now boot into your current OS. Go to Settings>Updates>Local Update
This will install the downgrade ROM from russian Huawei site (B603)
After this is installed your phone will boot into your current OS again. This time delete UPDATE.APP from dload folder and put your stock firmware in there.
Now repeat the process Settings>Update>Local Update
This time it will finally install that stock KitKat with EMUI 2.3 OMG !!! Finally !!!
God i hope i'll never have to do this again

Help needed

Fellows,
Please help me in my problem,
I was on b817 recently then I decided to change it as it has many bugs,
Finally I get to b800(transition from),since then I'm stuck on it, I can't downgrade or upgrade always I get " there is no update.app " message though the from is in my Dr load folder. I tried to update/downgrade. Through update apk and 3 buttons method but all failed.
I'm running everything stock I never tried to modify anything and I'm not rooted. I sent Pm to some senior members here but no one has replied me. I'm a noobie member if anyone would help please on how to get this problem sorted step by step with links to required programs please.?
My customs is 433 ??

Hello, is the file located on /dload at your SD card? Did you extract the update.zip first? If yes/ not try it with(/out). If that all fails you could extract the update.zip and flash all images manually through fastboot.

Yes it is In sd card root.. but to go for b621 or b805 we have to put the update.zip file in dload without extraction..
I said I'm noobie Here I don't know what is fastboot and how to flash anything through it ???

I happened just like you B 817.After the downgrade puts B621 UPDATE.APP on dload folder in the phone memory or SD card, turn off your phone, press simultaneously + and - volume and power button and the phone will write a alone software B621.I hope I helped you.Before that make one factoey reset plz.

abuelzoz2005 said:
Yes it is In sd card root.. but to go for b621 or b805 we have to put the update.zip file in dload without extraction..
I said I'm noobie Here I don't know what is fastboot and how to flash anything through it ???
Click to expand...
Click to collapse
I assume post #6 here (http://forum.xda-developers.com/showthread.php?t=3211971) already answers your question. If that doesn't work like it should, I could describe more detailed what I thought of, sorry.

l3Nni said:
I assume post #6 here (http://forum.xda-developers.com/showthread.php?t=3211971) already answers your question. If that doesn't work like it should, I could describe more detailed what I thought of, sorry.
Click to expand...
Click to collapse
How to flash through boot loader?
What application do I need to flash it?
Sorry for that but I'm noobie..??

First you need to set up your PC correctly. I assume you are running Windows.
So, download and install the HiSuite to get all needed drivers. Then follow this (http://dottech.org/21534/how-to-ins...ows-computer-for-use-with-your-android-phone/) instruction, I recommend to use methode 2.
Now shut down your device, press volume- and power at the same time. You should boot into the boot loader (white background). Maybe the device has to be connected to the PC for that.
Now you could follow the instruction in the link in the last post of me. Since you booted manually into the bootloader, begin with the fastboot command. (All files that are going to be flashed have to be in the location you put the fastboot-files (as described in the link) in.
I hope this is understandable. If not, feel free to ask!

Well, many thanks for your help,
I've downloaded all applications required on computer.
I'm planning to roll back to b621(already I have the zip for it).
Then what to do exactly Or what to write in fastboot menu ? (sorry I'm complete noob. ???

I think (but I'm quite not sure) that B621is instead of beeing a full firmware just an update. So I'd recommend to use B609 as full (!)version. Maybe you find the B609 stock recovery somewhere to download or you have to extract it with the huawei-update-extractor (just google and install it).
Download also the newest versions myrom and twrp, save the twrp file and the B609 stock recovery in the directory of your adb folder, the myrom on your sd card.
Now you boot your device into the bootloader. How to do this is described in my last post. In big letters the status of the bootloader is showed up. If its locked read the xda thread about how to unlock and continure afterwards.
Type into cmd (how to open is described in the adb tutorial): fastboot flash recovery [name of recovery.img] for example 'fastboot flash recovery recovery_twrp.img'.
After that unplug the device and shut down trough pressing power for some seconds.
Press volume+ and power at the same time and you will boot into the custom recovery. Here you're gonna flash the myrom.img.
When that is done you should flash the stock recovery with the same procedure like you did with twrp.
Now you could flash the B609 with the dload method.
I'm sorry if this all is a bit messy, I'm just writing on my phone and I'm a bit tired..

Victory.....
Many thanks for your help I'm on b621 now.

Nice, your welcome?

[Tutorial] Convert Honor 6+ Chinese in European (only PE-TL10)

Today I bring new tutorial to completely convert the Honor 6 Plus Chinese in European. (It's only applicable for the model PE-TL10).
So we must have unlocked bootloader and root. If we meet these requirements, we can proceed with the conversion.
1. Download the latest European version (B571)
2. Create a folder called dload in the micro sd and introduce there the update.app
3. Download the European oeminfo here, unzip and move the oeminfo.img to internal memory.
4. Install the app termux or terminal emulator
5. Open the app and write "su" to get root permissions.
6. Later, write "dd if=/sdcard/oeminfo.img of=/dev/block/platform/hi_mci.0/by-name/oeminfo" and when it finished, turn off the Smartphone.
7. Press Vol-+ and Power to install the European update.app and we will have turned the PE-TL10 Chinese in European.
Neither me or XDA we are not responsible for any misuse of the tutorial. I want to thank @foncubiert to try it
Original: http://www.htcmania.com/showthread.php?t=1228181

I was looking at it for 1 year, thank you very much. now google hello.

Is there "oeminfo.img" necessary to do the reverse of this process for install twrp old backup?
*** I need "oeminfo" file in China stock rom of China brand Honor 6 Plus Pe-TL10.
This file can be accessed "Srktool backup" or in "dev/block/platform/hi-mci.0/by-name/" . Thank you.

Is there a way to do this for the PE-UL00?
Inviato dal mio PE-UL00 utilizzando Tapatalk

Anyone tried it on PE-UL00 ?
Maybe there's a way to do the same.

Nice guide

Thanks juanro49 for the guide & the file.
The oeminfo works on PE-UL00 (tested myself- finally all google functions and no more strange chin. Stuff)

100 % working, I converted my Chinese PE-TL10 to EU one. Thanks for sharing it!

does anyone know how to convert to C636 ??

RK0lb3 said:
Thanks juanro49 for the guide & the file.
The oeminfo works on PE-UL00 (tested myself- finally all google functions and no more strange chin. Stuff)
Click to expand...
Click to collapse
I did not understand well. It works on pe-ul00?
The b571 can be installed?
thank you

roger_50 said:
I did not understand well. It works on pe-ul00?
The b571 can be installed?
thank you
Click to expand...
Click to collapse
news?

juanro49 said:
Today I bring new tutorial to completely convert the Honor 6 Plus Chinese in European. (It's only applicable for the model PE-TL10).
So we must have unlocked bootloader and root. If we meet these requirements, we can proceed with the conversion.
1. Download the latest European version (B571)
2. Create a folder called dload in the micro sd and introduce there the update.app
3. Download the European oeminfo here, unzip and move the oeminfo.img to internal memory.
4. Install the app termux or terminal emulator
5. Open the app and write "su" to get root permissions.
6. Later, write "dd if=/sdcard/oeminfo.img of=/dev/block/platform/hi_mci.0/by-name/oeminfo" and when it finished, turn off the Smartphone.
7. Press Vol-+ and Power to install the European update.app and we will have turned the PE-TL10 Chinese in European.
Neither me or XDA we are not responsible for any misuse of the tutorial. I want to thank @foncubiert to try it
Original: http://www.htcmania.com/showthread.php?t=1228181
Click to expand...
Click to collapse
I will have succeeded in turning my smartphone PE-UL00 to PE-TL10.
https://forum.xda-developers.com/honor-6/general/pe-ul00-naw-pe-tl10-experience-t3570052 here, my experience.

RK0lb3 said:
Thanks juanro49 for the guide & the file.
The oeminfo works on PE-UL00 (tested myself- finally all google functions and no more strange chin. Stuff)
Click to expand...
Click to collapse
Thanks, my PE-UL00 was converted to TL10 (VIA TWRP if u got any error, just facory reset and reboot and wait
edit.
how to make this phone work wwith dual sim ? i got only 1 sim and only 2g

Has someone tried to install it over PE-TL10V100R001CHNC00B260 build. Or it doesn't matter what is the previous version in the phone?

jhettler said:
Has someone tried to install it over PE-TL10V100R001CHNC00B260 build. Or it doesn't matter what is the previous version in the phone?
Click to expand...
Click to collapse
Hi guys,
self reply. I got through it. It was not completely without troubles, but finally I have Android 6.0 with EMUI 4.0.1 (build PE-TL10C432B571) in my PE-TL10 (originally on Android 4.4.2, EMUI 3.0, build PE-TL10V100R001CHNC00B260). I don't need a ROOT and custom recovery now so it is unrooted and stock recovery now.
First, I have never rooted Honor 6 PLUS and as it is not the newest device and it is not fully supported anymore by Honor MultiTool you have to use another way.
Bootloader has to be UNLOCKED - I used the MultiTool - it's fine and without any troubles
Device has to be ROOTED - that was a bit issue, because you have to flash custom recovery to be able to flash SuperSU and root the device. I did it via fastboot.
To enter the bootloader mode (fastboot) just switch off device, then hold Vol- and plug the USB cable - it should enter the bootloader mode - you should see the android robot and "phone UNLOCKED" indication.
Now you can use fastboot commands (you have to have proper drivers installed, you can find instructions on in another threads on XDA).
Or you can enter bootloader mode with command "adb reboot fastboot" - you have to be in the system (running Android) on the phone to run adb commands. It will restart your device and enter the bootloader mode after restarting.
Once you are in the bootloader mode with UNLOCKED bootloader you can flash custom recovery (necessary to flash SuperSU). I had to flash the proper custom recovery which I found here . I tried to flash another TWRP and CWM recoveries, but without success. You can flash the recovery with fastboot command "fastboot flash recovery CWM.img".
Then you can restart the device into the system with "fastboot reboot". Once you are in the system, you can reboot into recovery with command "adb reboot recovery".
In the recovery choose "install ZIP from ..." and choose this file. I had to choose the version BETA-SuperSU-v2.42.zip otherwise it didn't install anything despite the installation process was successful.
After the successful installation of SuperSU, you should have ROOTED device. You can check it for example with Root checker.
Then I mostly followed this tutorial. But with few modifcations.
I couldn't find this /dev/block/platform/hi_mci.0/by-name/oeminfo folder in my phone so I had to change the command for terminal emulator in the phone to dd if=/sdcard/oeminfo.img of=/dev/block/platform/ff1fe000.dwmmc0/by-name/oeminfo. There is another folder in "platform" folder but it doesn't contain "by-name" folder.
Then the tutorial says Press Vol-+ and Power to install the European update.app and we will have turned the PE-TL10 Chinese in European, but the issue is, you can't enter the "download mode" after you installed custom recovery. It simply doesn't enter the "download mode" and it stays on the screen with honor logo.
It was necessary to get into the system to be able to use fastboot command to flash stock recovery. How to solve it. I could't enter the system anymore, but I could enter the CWM. So I wiped the data and cache through CWM (Vol+ and Power button) and I was able to enter the Android system again.
I used again the "fastboot flash recovery B250.img" and flashed this recovery. It didn't correspond with my build version B260, but it helped.
Then I restarted the phone, entered again the system and through "Settings - Updater - Menu - Local update" and choose the "UPDATE.APP" from "dload" folder (it should be automatically detected) and whoila, it should restart the device and load "download mode" and install the UPDATE.APP. You should be able to do this step with Vol+- Power button combination instead of doing it through "Settings menu". And that's all.
I rather added some of used files into the attachment

Hello there I have a Honor 6 plus PE-UL00 that i want to change to European rom from China variant. Its rooted Android 6 Marshmallow with custom recovery TWRP
Firmware PE-UL00C00561. I'm still a beginning t limited knowledge,. I've learnt what I could from the forums. anyhow..
As per the changing rom guide , I downloaded The European rom B571 update.app and placed it in sdcard DLOAD folder as well put the OEM.img on the hard drive and ran termux and entered the command as per the guide and it seemed to work.
The Next step says ton turn the phone off And then press the volume+/- and Power button.. and it will load into the system and install the rom.
As per The post above, i got up to that step and the phone would Just boot to menu then reset.. I was able to get in recovery mode via TWRP and ran my backup.
I've read Post that the PE.UL00 can be converted, but is it following the exact same way as the PE-TL10? Or I may be missing a step.
The above post encountered a similar issue and had success, but his was a PETL10 and had hise his own recovery.img. (250.img to access his system and update the rom. in that scenario would l try to flash my recovery.img to get back into the system and run the local update?
Lastly another person had commented about their success converting a PE-UL00 to European rom. But just mentioned that it was through TWRP. Would that be just a matter of one I've done the OEM.img boot back into recovery and installed the app through TwRp or must I do a full wipe First?
Sorry for rehashing an old thread.. any advice much appreciated.
.

I got it working. After the OEM. IMG update I tried flashing it through TWRP. After some trial and error, my power button isn't responsive sometimes so maybe i wasnt pressing the volume down/up power button combo correctly. As the phone would just biot to Honor screen and reset.
Eventually after a few reboots and tries it went into the emui screen download mode and success.. I think. I did lose root in the process. I'm unsure how, still a novice, but I was able to re root the phone install custom recover via. TWRP and install SuperSU.
Now I don't have to deal with those China apps

roger_50 said:
I did not understand well. It works on pe-ul00?
The b571 can be installed?
thank you
Click to expand...
Click to collapse
I made it on my pe-ul00, it works for 100%.
It was a long time ago but as I remember, I installed b570 and after that update to b571.

semihy said:
I was looking at it for 1 year, thank you very much. now google hello.
Click to expand...
Click to collapse
May I know how did you rooted the chinese version device ?

[TIPS] Revert Custom Rom to Official and untouched - Hard restore

Hi!
I see the large number of requests concerning the roolback of a custom rom to a official and untouched EMUI 4, i decide to create this thread.
After follow that methode, you able to rest on official EMUI and get the new update automatically on OTA (directly on your phone) OR try to install custom rom with a clear and good base version.
1. You ave access on TWRP?
-If not, pleas unlock your bootloader (again) and flash TWRP recovery for you actual version (marshmallow or nougat).
-perform a full wipe and restore your partitions on "ext4" format, shutdown phone.
2. Get a "oem_info.zip" for your model phone (dont extract the .zip) and push it on your internal or external sd.
-This archive contain cust and oem info for patched your phone at the correct manufacture information.
-I have a link for VNS-L31 (c432, but is not very important) HERE LINK
-If you have other model (VNS-L31) pleas find a correct patch for you (VNS-L21, ...).
3. Find and download a EMUI marshmallow official full-ota update.
-for a VNS-L31 i advice choice a VNS-L31C432B160 full-ota update.
4. Unpack your update archive.
5. Create "dload" folder on your internal or external sd and put it UPDATE.APP
6. Reboot phone on TWRP recovery and flash "oem_info.zip"
7. Use dload methode for update (hold 3 buttons phone and dont release before "dload screen" appears)
8. Unlock your bootloader again (important!) And make a factory reset
9. Your phone reboot (please wait ) and done!
Ok now you are on official version, please update on setting menu >> update and choice, rest on official or flash a custom rom..
P9 lite brick precision:
In my personal experience the "p9 lite" is very easy to flash, mod or other tips and the risk of HARD brick is very very tiny.
If you see this page and your phone bootloop, relax, keep calm at 99,999% you have a little and ridiculous brick
Good luck and flash happy!

hi! i'm on 381, on my phone i have root, twrp and elite kernel...this guide is good for me???why after dload method i have to re-unlock my bootloader??
thank you and sorry for my english XD

macao1989 said:
hi! i'm on 381, on my phone i have root, twrp and elite kernel...this guide is good for me???why after dload method i have to re-unlock my bootloader??
thank you and sorry for my english XD
Click to expand...
Click to collapse
Yes, is good for you.
Not necessary to re-unlock bootloader.

Therand said:
Hi!
I see the large number of requests concerning the roolback of a custom rom to a official and untouched EMUI 4, i decide to create this thread.
After follow that methode, you able to rest on official EMUI and get the new update automatically on OTA (directly on your phone) OR try to install custom rom with a clear and good base version.
1. You ave access on TWRP?
-If not, pleas unlock your bootloader (again) and flash TWRP recovery for you actual version (marshmallow or nougat).
-perform a full wipe and restore your partitions on "ext4" format, shutdown phone.
2. Get a "oem_info.zip" for your model phone (dont extract the .zip) and push it on your internal or external sd.
-This archive contain cust and oem info for patched your phone at the correct manufacture information.
-I have a link for VNS-L31 (c432, but is not very important) HERE LINK
-If you have other model (VNS-L31) pleas find a correct patch for you (VNS-L21, ...).
3. Find and download a EMUI marshmallow official full-ota update.
-for a VNS-L31 i advice choice a VNS-L31C432B160 full-ota update.
4. Unpack your update archive.
5. Create "dload" folder on your internal or external sd and put it UPDATE.APP
6. Reboot phone on TWRP recovery and flash "oem_info.zip"
Click to expand...
Click to collapse
I can do everything up to point 6... won't enter to twrp... stays on Your device is now booting...
Update: I can now reach point 7 but now won't do dload (3 buttons) method... Huawei logo all the time. Can't even turn off the phone

In my other thread you post the same problem but is not entirely the same..
You succeeded to enter on fastboot mode? Flash recovery?
If you follow the steps 1-5 is impossible to fail the 6 point..
You have acces on fastboot mode or not?..

Therand said:
In my other thread you post the same problem but is not entirely the same..
You succeeded to enter on fastboot mode? Flash recovery?
If you follow the steps 1-5 is impossible to fail the 6 point..
You have acces on fastboot mode or not?..
Click to expand...
Click to collapse
I did update the post... 3 hours ago I wasn't able to enter TWRP, some way I did managed, now I can enter fastboot, I did flash custOEM (sorry I don't remember exactly the name but it's the one of your post) .zip file. Now I can't do dload method, stuck on huawei logo. If I try to go to recovery, I got red message "phone fail validation"...
I know, I post on both but I was trying to do everything...
just tried... validation red error message won't let me go to TWRP now...

You have a VNS-L31C432?
Your phone does not enter at dload mode?
Wipe all partitions an retry flash a oeminfo for your model phone (if not C432 you need right oeminfo).

Therand said:
You have a VNS-L31C432?
Your phone does not enter at dload mode?
Wipe all partitions an retry flash a oeminfo for your model phone (if not C432 you need right oeminfo).
Click to expand...
Click to collapse
How can I wipe all partitions if stuck in Huawei logo? Is there a way to do everything from adb command line? (I'm using Mac and cannot use all the tools I've found here XDA neither hiSuite which is basically a backup photo/video only the Mac version).
Thank for helping, really appreciate
To answer your question in the other thread, yes bootloader is unlocked and I am on C432.

What's your rom have before the bootloop?
You have the right version of TWRP for your rom?
If you have a MM version Don't flash a TWRP for N.
Send me a link to TWRP version used (thread forum)

Therand said:
What's your rom have before the bootloop?
You have the right version of TWRP for your rom?
If you have a MM version Don't flash a TWRP for N.
Send me a link to TWRP version used (thread forum)
Click to expand...
Click to collapse
Before the bootloop I was on L31C900 (on the phone) but I did actually flashed C432B160 because I did rollback. TWRP used I've found in the other post where there's a OEMfile to flash (but for this I need to double check because I did look so many pages which I am not 100% sure.

I not have experience on other model that C435.
But i suggest to find a oeminfo for your variant (C900?)
For TWRP you need flash a version for MarshMallow HERE
Flash it and pas return here (fastboot flash return and first enter to new recovery)

Hi, found Windows emulator for MacOs so I extract from update.app boot.img and flash.
I did format all partitions as told using a proper twrp this time.
What's next step, system says NO OS INSTALLED?

islandman75 said:
Hi, found Windows emulator for MacOs so I extract from update.app boot.img and flash.
I did format all partitions as told using a proper twrp this time.
What's next step, system says NO OS INSTALLED?
Click to expand...
Click to collapse
Flash partitions on .img files is not needed.
Just find a corect oeminfo for your model phone.
Flash it on TWRP recovery.
Use dload methode to update on basical version (MarshMallow b160).
After that, unlock bootloader again and make a factory reset.
Switch on your phone (the first boot make long time).
Update on last emui on OTA.
Done!
After that you able to install a custom rom.

Therand said:
Flash partitions on .img files is not needed.
Just find a corect oeminfo for your model phone.
Flash it on TWRP recovery.
Use dload methode to update on basical version (MarshMallow b160).
After that, unlock bootloader again and make a factory reset.
Switch on your phone (the first boot make long time).
Update on last emui on OTA.
Done!
After that you able to install a custom rom.
Click to expand...
Click to collapse
Done!
Thanks again you're saving my life!
IT won't turn off so been always on it won't keep the charge... Writing so because apparently it won't go to download mode (dload) if plugged in. On the other way if I unplugged from power it won't even start. Shall I force to download mode using console ADB or FASTBOOT? I had looked but can't find anything...

islandman75 said:
Done!
Thanks again you're saving my life!
IT won't turn off so been always on it won't keep the charge... Writing so because apparently it won't go to download mode (dload) if plugged in. On the other way if I unplugged from power it won't even start. Shall I force to download mode using console ADB or FASTBOOT? I had looked but can't find anything...
Click to expand...
Click to collapse
I not understand.
You not able to switch on your phone without connected charger?

Therand said:
I not understand.
You not able to switch on your phone without connected charger?
Click to expand...
Click to collapse
Correct. Because I'm not able to switch it off it won't keep the charge. When discharged, the minute I do plug on charge it wakes up... That's the loop...
My main question is: does a command exist to enter download mode using terminal?

islandman75 said:
Correct. Because I'm not able to switch it off it won't keep the charge. When discharged, the minute I do plug on charge it wakes up... That's the loop...
My main question is: does a command exist to enter download mode using terminal?
Click to expand...
Click to collapse
You have a hardware bug?
No abd command to enter dload mode..
Try flash a update.zip with twrp (not guaranted)
After that unlock bootloader again and make factory reset.

Therand said:
You have a hardware bug?
No abd command to enter dload mode..
Try flash a update.zip with twrp (not guaranted)
After that unlock bootloader again and make factory reset.
Click to expand...
Click to collapse
I'll try. Thank you

Hi, I followed this guide to go back to stock from elite rom. I flashed my oeminfo.img on twrp and then went to dload combination. Do I have to unlock the bootloader after the reboot? Thanks!

Hi,
I followed your guide and it works perfectly thanks!

Huawei eRecovery : "Getting package info failed". Honor 9 Lite

How do I uninstall TWRP and unroot my Honor 9 Lite so i can update the phone to LLD-L31 8.0.0.128(C432) with face unlock?
I have already locked bootloader.
When i reboot the phone it automatically brings me to eRecovery and when i "Download latest version and recovery" it says "Getting package info failed". Please help

OmaroOmaro said:
How do I uninstall TWRP and unroot my Honor 9 Lite so i can update the phone to LLD-L31 8.0.0.128(C432) with face unlock?
I have already locked bootloader.
Click to expand...
Click to collapse
Looks like you "played" a bit to much with your phone. There is no official TWRP yet and no official Firmware Image. So, this looks very bad for you to get out of this again.
Maybe try HiSuite from Huawei or MultiTool
https://forum.xda-developers.com/devdb/project/dl/?id=28734
Probably this could help as long as you can connect via ADB or HDB from HiSuite.
Good luck...

Hey, I've faced the exact same issue. After playing even a bit more, I manged to revert my device (LLD-L31) back to stock.
I've uploaded all the files I used, for you.
It passes SafetyNet check successullfy!
Download required files here
Here is was I did:
Format data using TWRP (Wipe -> Format data)
Enter fastboot mode (Connect to PC, power+ VolDown)
fastboot flash ramdisk ramdisk.emmc.win
fastboot flash kernel kernel.emmc.win
fastboot flash system SYSTEM.img
fastboot reboot
Click to expand...
Click to collapse
Please tell me, if it worked!
Note:
The SYSTEM.img is extracted from the UPDATE.APP from this site.
Kernel and ramdisk are from a LOS-15.1 TRWP backup. Not sure if they're required, but it didn't work for me without flashing them.

error while extracting update.app
hello sir, I'm getting this error while extracting update.app.. recovery ramdisk.img invalid header crc - Expected: 18707 Got:56582

creativeanand said:
hello sir, I'm getting this error while extracting update.app.. recovery ramdisk.img invalid header crc - Expected: 18707 Got:56582
Click to expand...
Click to collapse
Why exactly do you need to extrac the update.app? I've already uploaded all required files and linked them in my previous post.
Also, which program did you use? Which operating system did you use?

now my phone is looping
MateUserHHTT said:
Why exactly do you need to extrac the update.app? I've already uploaded all required files and linked them in my previous post.
Also, which program did you use? Which operating system did you use?
Click to expand...
Click to collapse
now my phone is looping on off, on of
and i can't go to fastboot

creativeanand said:
now my phone is looping on off, on of
and i can't go to fastboot
Click to expand...
Click to collapse
In order for me to help you, I need to know exactly what you did.
So what did you do before your phone went into bootloop? (And don't worry, my Honor 9 lite has been in bootloops 100 of times, we can fix that! )
And how did you try to enter fastboot?
Make sure your phone is connected to a computer via USB!
Then press and hold Volume DOWN and Power button until phone reboots.
Release power when you see the blue honor screen.
Release volume down key, when you are in fastboot.

MateUserHHTT said:
In order for me to help you, I need to know exactly what you did.
So what did you do before your phone went into bootloop? (And don't worry, my Honor 9 lite has been in bootloops 100 of times, we can fix that! )
And how did you try to enter fastboot?
Make sure your phone is connected to a computer via USB!
Then press and hold Volume DOWN and Power button until phone reboots.
Release power when you see the blue honor screen.
Release volume down key, when you are in fastboot.
Click to expand...
Click to collapse
after flash shall i wipe data/ factory reset?

creativeanand said:
after flash shall i wipe data/ factory reset?
Click to expand...
Click to collapse
Again, I need to know whay you did!
You don't necessarily need to factory reset after a flash. But it probably won't make things worse.
But if you are switching the ROM (stock to a custom Rom) you indeed have to format data in twrp.

MateUserHHTT said:
Again, I need to know whay you did!
You don't necessarily need to factory reset after a flash. But it probably won't make things worse.
But if you are switching the ROM (stock to a custom Rom) you indeed have to format data in twrp.
Click to expand...
Click to collapse
i unlocked my phone bcoz the sound of h9l was lower then Redmi note 5 so i wanted to boost the sound with aris sound system and dolby atmos app.
after flashing 'SUPERSU' phone was not starting freeze at honor logo and then i wiped & rested in twrp...
now i did fastboot as you said now eRecovery is asking download latest version, wipe data/ f rest, reboot, shoutdown what shall i do now,,....thank you for helping

creativeanand said:
i unlocked my phone bcoz the sound of h9l was lower then Redmi note 5 so i wanted to boost the sound with aris sound system and dolby atmos app.
after flashing 'SUPERSU' phone was not starting freeze at honor logo and then i wiped & rested in twrp...
now i did fastboot as you said now eRecovery is asking download latest version, wipe data/ f rest, reboot, shoutdown what shall i do now,,....thank you for helping
Click to expand...
Click to collapse
Ok, now I can help you.
First of all, install TWRP. Use img2 (the experimental test build) if img #1 just stucks at the TWRP screen and won't enter the recovery.
Tell me when you succeed
You can get TWRP from here
https://forum.xda-developers.com/9-lite/development/recovery-twrp-3-2-1-0-t3789306

MateUserHHTT said:
Ok, now I can help you.
First of all, install TWRP. Use img2 (the experimental test build) if img #1 just stucks at the TWRP screen and won't enter the recovery.
Tell me when you succeed
You can get TWRP from here
https://forum.xda-developers.com/9-lite/development/recovery-twrp-3-2-1-0-t3789306
Click to expand...
Click to collapse
i did now?

creativeanand said:
i did now?
Click to expand...
Click to collapse
Great!
Now just follow my instructions from my earlier post
Make sure to put the files you download in the same folder as you run fastboot commands, so fastboot can find these files.
Good luck!??

MateUserHHTT said:
Great!
Now just follow my instructions from my earlier post
Make sure to put the files you download in the same folder as you run fastboot commands, so fastboot can find these files.
Good luck!
Click to expand...
Click to collapse
i did as you said .. now phone is not starting stoped at huawei eRecovery
whan i go to twrp phone reboots itshalf after 10sec

If you can boot to bootloader
and bootloader = unlocked
and FRP = unlock
then you can reset the phone to stock-rom
you need download with HuaweiFirmwareFinder 1 FULL-Update from YOUR build
i see in FF "LLD-L31C432B131 FullOTA-MF
download the 3 files, extract with HuaweiUpdateExtractor
- ramdisk.img
- recovery_ramdis.img
- system.img
the extractor do automatik for all *.img 1 *.img.header
copy this 6 files to your ADB-Folder
For reset to stock-rom
- fastboot flash ramdisk ramdisk.img
- fastboot flash recovery_ramdisk recovery_ramdis.img
- fastboot flash system system.img
after this reboot the phone, eRecovery format low-level "data", phone reboot and start as "new" phone (initial settings)
before you do this you can do 1 test :
- fastboot flash recovery_ramdisk recovery_ramdis.img
why?
format low-level "data" work ONLY with stock-recovery, NOT with TWRP
after this is your "data" encrypt !
Only 1 TWRP work with encrypt/decrypt : https://forum.xda-developers.com/9-lite/development/recovery-twrp-3-2-1-0-t3789306
if phone work set PIN for Screen-open (this PIN need TWRP by start for encrypt/decrypt "data")
if you need, you can now flash recovery_ramdisk TWRP.img
if you need install OTA-Updates : if OTA-Update on your phone "install update now ?" answer "NO, later" and
- fastboot flash recovery_ramdisk recovery_ramdis.img (stock-recovery)
and install Update now.
if all work and you need : flash TWRP
i hope you understand this "way"
the advantage : you can install with TWRP OR flash developer-system.img and if anything not work - reset phone to stock-rom
i use ONLY TWRP with encrypt. this is security-question. if phone lost - data is encrypt !
TWRP without encrypt work only
- boot to TWRP
- format data
- boot from TWRP to TWRP
- data have now NO encrypt

Doesn't Android use FBE by default since Android O, so the data is always encrypted no matter what TWRP was used?

JamesBott said:
If you can boot to bootloader
and bootloader = unlocked
and FRP = unlock
then you can reset the phone to stock-rom
you need download with HuaweiFirmwareFinder 1 FULL-Update from YOUR build
i see in FF "LLD-L31C432B131 FullOTA-MF
download the 3 files, extract with HuaweiUpdateExtractor
- ramdisk.img
- recovery_ramdis.img
- system.img
the extractor do automatik for all *.img 1 *.img.header
copy this 6 files to your ADB-Folder
For reset to stock-rom
- fastboot flash ramdisk ramdisk.img
- fastboot flash recovery_ramdisk recovery_ramdis.img
- fastboot flash system system.img
after this reboot the phone, eRecovery format low-level "data", phone reboot and start as "new" phone (initial settings)
before you do this you can do 1 test :
- fastboot flash recovery_ramdisk recovery_ramdis.img
why?
format low-level "data" work ONLY with stock-recovery, NOT with TWRP
after this is your "data" encrypt !
Only 1 TWRP work with encrypt/decrypt : https://forum.xda-developers.com/9-lite/development/recovery-twrp-3-2-1-0-t3789306
if phone work set PIN for Screen-open (this PIN need TWRP by start for encrypt/decrypt "data")
if you need, you can now flash recovery_ramdisk TWRP.img
if you need install OTA-Updates : if OTA-Update on your phone "install update now ?" answer "NO, later" and
- fastboot flash recovery_ramdisk recovery_ramdis.img (stock-recovery)
and install Update now.
if all work and you need : flash TWRP
i hope you understand this "way"
the advantage : you can install with TWRP OR flash developer-system.img and if anything not work - reset phone to stock-rom
i use ONLY TWRP with encrypt. this is security-question. if phone lost - data is encrypt !
TWRP without encrypt work only
- boot to TWRP
- format data
- boot from TWRP to TWRP
- data have now NO encrypt
Click to expand...
Click to collapse
sir shall i go to service center i have warrenty

creativeanand said:
sir shall i go to service center i have warrenty
Click to expand...
Click to collapse
By unlocking the bootloader you've void your warranty.
They will probably charge you for the repair.
What happens if you install this version of TWRP?
It's on Chinese, click the little icon in the top right corner and select "English".
If it doesn't crash, try this one.
Make sure to follow the correct steps for flashing.
fastboot flash recovery_ramdisk [filename.img]
fastboot flash reboot
QUICKLY unplug USB and before it fully reboots, hold press Volume up key
If it fails, check out this guide:
https://forum.xda-developers.com/9-lite/how-to/guide-unbrick-device-recover-bootloop-t3772563

My hon or 9 lite is in teaming page and it won't open I have tried to update via erecOvery but it won't work and I cannot go to recovery mode please help me.

@Prabin99
what you build ?
what have you do before start the update ?
have you anything flashed ?