Glass Screen Protector - ZTE Nubia Z17 Accessories

Would you have a glass screen protector to recommend for the Nubia Z17 ?
I'm getting mine in about 2 weeks, and since the phone seems to have a slightly curved screen and tiny side bezels, I'd like to get a screen protector with a very good fit !
So if you'd have some links/brands to recommend, please share :good:
Thanks a lot !

Well the issue is that the screen is bent towards the edges and the protector will not connect with the screen.
I uses Huawei p10 stuff but it looks ugly and makes the edge gestures difficult

tsiebold said:
Well the issue is that the screen is bent towards the edges and the protector will not connect with the screen.
I uses Huawei p10 stuff but it looks ugly and makes the edge gestures difficult
Click to expand...
Click to collapse
Alright, thanks for the feedback !
That's why for once I'm going to try a soft one, it's meant to be thinner so I hope I won't feel too much the difference between the screen protector and the actual edge
I'll let you know when it arrives ( from China of course )
I got this one ( can't post the link, but on aliexpress ) : "XSDTS for Nubia Z17 soft nano explosion proof film "

hello,
It is possible to find them with your favorite search engine with the key words "nubia z17 tempered glass -mini" or "nubia z17 tempered -mini". You'll find many, on aliexpress, a*zon, giztop or others companies. I'll buy be he same occasion a TPU silicon protector ("nubia z17 TPU silicon cover -mini"). the prices are variable, depending the sellers ("official" or not, aliex or not... and quality or not )

Yep thank you, I know how to find some haha, the point of the request was to buy one that somebody would have tried and recommended since the fitting is more problematic with that edge to edge screen
I should get my phone this week, and the screen protector probably next one, so I'll review it if somebody is interested

Sir_Godding said:
Yep thank you, I know how to find some haha, the point of the request was to buy one that somebody would have tried and recommended since the fitting is more problematic with that edge to edge screen
I should get my phone this week, and the screen protector probably next one, so I'll review it if somebody is interested
Click to expand...
Click to collapse
I'm sure if you are here you know how to do that... Don't imagine I was looking to offense you
I saw on many and many pages and shops pseudo Z17 case and tempered glass, it was why I indicated my search criteria.
I saw many cases with the holes not at the good place, idem for the glass protection (have a look to a*zon or al*press for example...
I'll order here (Imak products). I'll post here my opinion after getting the products.

Sir_Godding said:
Yep thank you, I know how to find some haha, the point of the request was to buy one that somebody would have tried and recommended since the fitting is more problematic with that edge to edge screen
I should get my phone this week, and the screen protector probably next one, so I'll review it if somebody is interested
Click to expand...
Click to collapse
I found one on eBay for 6 bucks. It fits really well and is good quality. The only problem for me was a little too much greasiness on it (the oleophobic coating wasn't very strong). But the fit and the thickness are really nice. I can't find another one that fits. I ordered two more that were clearly for Z17 in the listings... but they sent me mini ones from China, and they don't fit. The only one that worked for me (a little greasy, but fits well) is search eBay... "Imak 9H Full Cover Black Tempered Glass Screen Protector Film For ZTE Nubia Z17". I'm still looking to find one that fits and has better coating.

Hi all
I saw many "tempered 2.5d glass" some with holes on the top (with black or white part top and bottom).
Something looks strange : the 2 holes left on the top of the glass are "aligned" On the phone, the "second hole" seems or must to be 2 ou 3mm down You can see the Camera (front face) and one centimeter on the right, 2 ou 3 mm above the second device. So if the 2 holes are on the same line, I suppose the front camera will not work well (or it is the light sensor ?)

I used this one for a few weeks but it's not very good :
ebay.co.uk/itm/201967749695
I've had 2 drops, both less than 1m onto a carpeted floor and it cracked on the second drop...
I'm thinking about getting a good brand screen protector for the Huawei P10 to use on my phone, such as Sparin. Besides the holes not quite matching up (which I imagine shouldn't be an issue as long as it's a clear but covering a sensor /camera), how have people found the use of a P10 on this phone? Any other suggestions?

Any luck finding a better one or is that the best you've found? Thanks
antidanis said:
I found one on eBay for 6 bucks. It fits really well and is good quality. The only problem for me was a little too much greasiness on it (the oleophobic coating wasn't very strong). But the fit and the thickness are really nice. I can't find another one that fits. I ordered two more that were clearly for Z17 in the listings... but they sent me mini ones from China, and they don't fit. The only one that worked for me (a little greasy, but fits well) is search eBay... "Imak 9H Full Cover Black Tempered Glass Screen Protector Film For ZTE Nubia Z17". I'm still looking to find one that fits and has better coating.
Click to expand...
Click to collapse

dorkozoid said:
Any luck finding a better one or is that the best you've found? Thanks
Click to expand...
Click to collapse
No. Best one so far. Tried another one, and it didn't fit at all. That one collects a little too much grease, but it at least fits well. Not ideal, but I haven't found a better one. The IMAK case from eBay is good too. It's reeeeeally annoying how they print the IMAK case logo on the back of the case in white, but the case itself is actually nice. Let me know if you find a better screen protector. I'll also keep this post updated if I find one.

I found it!
I finally found what seems to be a legit screen protector! It actually fits and has proper oleophobic coating. My troubles are over!!! I had it on for a week, and it's still going strong. I got it off Aliexpress for 7 bucks. Search for this exact listing: "ZTE Nubia Z17 glass MOFi full cover tempered glass Nubia Z17 NX563J screen protector NX563J glass film ZTE Z17 Phone Protective"
dorkozoid said:
Any luck finding a better one or is that the best you've found? Thanks
Click to expand...
Click to collapse

GLASS Nubia Z17 8gb
imak-hk.com

Hello,
I just received it (same as the pictures above). I'll test it this week-end.

antidanis said:
I finally found what seems to be a legit screen protector! It actually fits and has proper oleophobic coating. My troubles are over!!! I had it on for a week, and it's still going strong. I got it off Aliexpress for 7 bucks. Search for this exact listing: "ZTE Nubia Z17 glass MOFi full cover tempered glass Nubia Z17 NX563J screen protector NX563J glass film ZTE Z17 Phone Protective"
Click to expand...
Click to collapse
Thanks a lot, will try that one ! I just wish I had it before my phone had to go trough 3 weeks of sand, salt water, dirt and rocks in Indonesia haha ...

Does anyone know a real full screen protector for Z17S that covers the edge?
I can't find to decent one

Related

Screen protector?

Hello all,
So I was looking at the nillkin glass screen protector for the mi5s (not plus) and I saw many people complaining that the protector doesn't account for the curve of the glass very well which results in a lip all around the glass. Does anyone know anything about this? Have you had any of these problems? Are you currently using a screen protector which you would recommend? Thank you for your help.
I have tried two screen protectors from geekbuying and can confirm that they just don't fit. On both sides there is some screen sticking out because of its slight curve. It's very distracting when using the phone. I have also seen full covers on aliexpress but comments say it also cuts off some of the screen. So as far as I know currently none of the screen protectors fit perfectly.
alson041 said:
I have tried two screen protectors from geekbuying and can confirm that they just don't fit. On both sides there is some screen sticking out because of its slight curve. It's very distracting when using the phone. I have also seen full covers on aliexpress but comments say it also cuts off some of the screen. So as far as I know currently none of the screen protectors fit perfectly.
Click to expand...
Click to collapse
Are there any plastic ones that fit?
bozy09 said:
Are there any plastic ones that fit?
Click to expand...
Click to collapse
Haven't been able to find any yet. The phone is very new so there's still hope.. If anyone has some info it would be greatly appreciated.
Do you know of any phones with a similar screen shape that could fit if modified a little? Maybe the mi5 will fit if we cut out the fingerprint sensor part?
I'm with you. Since a proper glass protector doesn't seems to exist any plastic one should remedy the situation. Xiaomi should include a simple clear screen protector on all devices :/
imgur.com/a/SmqXH
get myself cheap($1.2) colorful full glass from aliexpress. fits just fine, its glued only with frame. tho as you can see on 2nd photo there are those little dots, you can see them on bright backgrounds.
just sayin if any of you was wonder how does glass like this looks irl
moth88 said:
imgur.com/a/SmqXH
get myself cheap($1.2) colorful full glass from aliexpress. fits just fine, its glued only with frame. tho as you can see on 2nd photo there are those little dots, you can see them on bright backgrounds.
just sayin if any of you was wonder how does glass like this looks irl
Click to expand...
Click to collapse
Thank you for sharing a picture, can you please also send a link for the exact seller?
bozy09 said:
Thank you for sharing a picture, can you please also send a link for the exact seller?
Click to expand...
Click to collapse
this one
aliexpress.com/item/9H-Colorful-Full-Cover-Toughened-Protective-Film-for-Xiaomi-5S-plus-Tempered-Glass-Screen-Protector-for/32764058724.html?spm=2114.13010608.0.0.4NXgZZ
tho i think that one would be better(mocolo got great oleophobic coating)
aliexpress.com/item/New-Mocolo-Full-Cover-Tempered-Glass-for-Xiaomi-5S-Mi5s-Plus-Premium-Glass-Anti-Explosion-Screen/32752295709.html?spm=2114.13010608.0.0.4NXgZZ
mofi seems great too, but its for like $10, with anti glare tho
moth88 said:
imgur.com/a/SmqXH
Click to expand...
Click to collapse
Where did you get your case from? link please
ermacwins said:
Where did you get your case from? link please
Click to expand...
Click to collapse
Brush Hybrid Carbon Fiber Armor Case For Xiaomi 5S Plus 5 Mi5 M5 Redmi Hongmi Pro NOTE3 NOTE4 3S Soft TPU PC Back Cover 1pcs
http://www.aliexpress.com/item/32759216230/32759216230.html
(from AliExpress Android)
bozy09 said:
Hello all,
So I was looking at the nillkin glass screen protector for the mi5s (not plus) and I saw many people complaining that the protector doesn't account for the curve of the glass very well which results in a lip all around the glass. Does anyone know anything about this? Have you had any of these problems? Are you currently using a screen protector which you would recommend? Thank you for your help.
Click to expand...
Click to collapse
Just ordered this from amazon https://www.amazon.co.uk/Granadatec...coding=UTF8&psc=1&refRID=4RCJ3MCYVYDHD9X2PDC7
You should buy something like this for curved edge screens.
https://www.aliexpress.com/item/Ful...32750323436.html?spm=2114.13010608.0.0.HuhoDg
Maybe these two are good options for covering the whole screen. I don't have neither the phone or these screens protectors right now, so I can't tell by myself.
Both from aliexpress, just search for them over there:
Code:
xiaomi-mi-5s-tempered-glass-5-15-inch-full-cover-screen-protector-mofi-original-ultra-thin
Code:
LEPHEE-Xiaomi-Mi5S-Plus-Tempered-Glass-Xiaomi-Mi5S-3D-Curved-Full-Cover-Screen-Protector-Carbon-Fiber
One has a really curved border (not just a 2.5D border) and the other one has a Carbon Fiber border that bends and sticks to the curved border of the screen.
kesleybenedet said:
Maybe these two are good options for covering the whole screen. I don't have neither the phone or these screens protectors right now, so I can't tell by myself.
Both from aliexpress, just search for them over there:
Code:
xiaomi-mi-5s-tempered-glass-5-15-inch-full-cover-screen-protector-mofi-original-ultra-thin
Code:
LEPHEE-Xiaomi-Mi5S-Plus-Tempered-Glass-Xiaomi-Mi5S-3D-Curved-Full-Cover-Screen-Protector-Carbon-Fiber
One has a really curved border (not just a 2.5D border) and the other one has a Carbon Fiber border that bends and sticks to the curved border of the screen.
Click to expand...
Click to collapse
This sounds better. https://es.aliexpress.com/item/IMAK...32785459384.html?spm=2114.13010608.0.0.3xMACl
4PaniC said:
This sounds better.
Click to expand...
Click to collapse
This looks good too.
It's a different type of screen protector, not a full cover, but still nice!
I laso made i mistake and i have bought original Nillkin Amazing H+ PRO 2.5D Tempered Glass... Looks terribly... See my picture in attachment. Edges of glass don't stick to screen well
i agree, looks horrible...
Can someone post some pics of a glass screen protector they get that actually fits correctly? Im not going to buy another one until I see actual real life pics of no halo effects around the side as 99% of the Chinese sellers on aliexpress use fake/altered pics to make things look better than in real life for things like this because they know youll never return it and theyve got your money already even if it is only $10 I do prefer the full glass look without the added fake frame color
Here you have photos of tempered glass from Nillkin and one of their cases for Mi 5s - http://onetech.pl/szklo-hartowane-nillkin-i-etui-frosted-shield-test-i-recenzja/

TGSP (Tempered Glass Screen Protectors) Ideal for LOCA Installation

I contacted many AliExpress sellers and bought many TGSP's to find ones that fit the following criteria:
No ugly dot-matrix grid on the glass
No paint (black, white, gold, silver, etc) around the edges
Large cut out around the camera and sensor array at the top
Case Friendly
These are the products that I can confirm fit the criteria above:
WEIYU 3D Curved Edge Not Full Cover Tempered Glass Screen Protector For Samsung Galaxy Note 8 Protective Film Case friendly
MKSUP 3D Curved Case Friendly Full Cover Tempered Glass Screen Protector For Samsung Galaxy Note 8 Note8 Protective Glass film
IMIDO Case Friendly Tempered Glass For Samsung Galaxy Note8 3D Curved Screen Protector Protective Film For Samsung Galaxy Note 8
All three of these "different" sellers are selling THE EXACT SAME PRODUCT. All three products came in the exact same shipping styrofoam brick, exact same wipes and exact same dust/mounting stickers. All three TGSP's are identical in every way. So, just buy the cheapest one.
Click the link, then RIGHT-CLICK and OPEN IMAGE IN A NEW TAB to see the full high-res image:
Naked Phone: https://i.imgur.com/GJZjgcv.jpg
With Case: https://i.imgur.com/Ljhd8l7.jpg
Shipping time was 2-3 weeks.
All 3 has black paint at top and bottom.
lennie said:
All 3 has black paint at top and bottom.
Click to expand...
Click to collapse
There are colour options for each one right under the price - each is available in clear, as well as other colours.
Thanks for this, but the weiyu looks like it has a dot matrix . the other 2 look ok, but i bet they have the dots too. great find for the clear top and bottom though.
Ive just started a dedicated DIY thread for the LOCA install is it OK I share your links there Neo?
SquidgyB said:
There are colour options for each one right under the price - each is available in clear, as well as other colours.
Click to expand...
Click to collapse
Viewed from my phone, the color option was definitely not apparent at a glance. The "select" button seemed to be for shipping options and not for color choice.
Anyway, those are not full coverage, they leave a gap on the sides which is one thing I absolutely hate on my current install. I don't mind the gap on the top and bottom but jeez at least cover the sides....plus those rounded corners like the Whitestone domes.
But all in all good find for people who don't really mind those short comings and great price too even though it's a month long ship date. I would have probably ended up buying 1 of each to test it wasn't for the expected ship dates.
lennie said:
Viewed from my phone, the color option was definitely not apparent at a glance. The "select" button seemed to be for shipping options and not for color choice.
Anyway, those are not full coverage, they leave a gap on the sides which is one thing I absolutely hate on my current install. I don't mind the gap on the top and bottom but jeez at least cover the sides....plus those rounded corners like the Whitestone domes.
But all in all good find for people who don't really mind those short comings and great price too even though it's a month long ship date. I would have probably ended up buying 1 of each to test it wasn't for the expected ship dates.
Click to expand...
Click to collapse
Fair play - yeah, if you clicked on the lower bar, where it says "Color/Shipping cost:free shipping ... Select" I think you'd get the colour options.
I agree with the edge coverage - I prefer a "de-domed" whitestone for exactly that reason - it covers ever so slightly more on the edges than a "standard" sized TG protector. The top section is also good as it doesn't cover any of the sensors.
If anyone does find a protector that covers the edges further than a whitestone, by all means tell xda about it!
Awesome! exactly what i was looking for.
Thanks OP
SquidgyB said:
Fair play - yeah, if you clicked on the lower bar, where it says "Color/Shipping cost:free shipping ... Select" I think you'd get the colour options.
I agree with the edge coverage - I prefer a "de-domed" whitestone for exactly that reason - it covers ever so slightly more on the edges than a "standard" sized TG protector. The top section is also good as it doesn't cover any of the sensors.
If anyone does find a protector that covers the edges further than a whitestone, by all means tell xda about it!
Click to expand...
Click to collapse
I don';t believe you will ever find a glass screen protector that covers edges further than the Whitestone - and most are going to be partial coverage on the sides that you mentioned. The reason is the difficulty of getting the glass to hold firmly to the screen and not lift off when you attach a case. Cases are going to push up on the screen - if it isn't glued down with super glue it will push u p - pure physics - so you have to find a middle ground that gives you the best coverage you can find - while still holding firmly to the screen without lifting off when you put on a case....The whitestone uses the liquid adhesive to hold firmer to the screen - and thus can be used with a wider variety of cases without the lift off happening...but even with whitestone you get some lift off with some cases.... I found a great screen protector on Amazon - by "AMFILM" that holds very well - gives partial coverage on the sides and works well with a number of different cases....
I think we are have abouot the best we can get right now - Whitestone for those that want the most - and others like the AMFILM I mentioned (Or the ones in the OP) for those that don't like doing the Whitestone install....
lennie said:
All 3 has black paint at top and bottom.
Click to expand...
Click to collapse
Instructions:
Select the transparent color option.
osrix said:
Thanks for this, but the weiyu looks like it has a dot matrix . the other 2 look ok, but i bet they have the dots too. great find for the clear top and bottom though.
Ive just started a dedicated DIY thread for the LOCA install is it OK I share your links there Neo?
Click to expand...
Click to collapse
I own all of them and none of them have the dot-matrix grid. That's why I bought like 6-7 of these, just to find out myself even though I contacted each seller. However, these sellers are like "online swap meet" sellers, so I didn't trust their word.
Neo3D said:
I own all of them and none of them have the dot-matrix grid. That's why I bought like 6-7 of these, just to find out myself even though I contacted each seller. However, these sellers are like "online swap meet" sellers, so I didn't trust their word.
Click to expand...
Click to collapse
Thanks NEO are they all the same or is one better than another?
Geekser said:
I don';t believe you will ever find a glass screen protector that covers edges further than the Whitestone - and most are going to be partial coverage on the sides that you mentioned. The reason is the difficulty of getting the glass to hold firmly to the screen and not lift off when you attach a case. Cases are going to push up on the screen - if it isn't glued down with super glue it will push u p - pure physics - so you have to find a middle ground that gives you the best coverage you can find - while still holding firmly to the screen without lifting off when you put on a case....The whitestone uses the liquid adhesive to hold firmer to the screen - and thus can be used with a wider variety of cases without the lift off happening...but even with whitestone you get some lift off with some cases.... I found a great screen protector on Amazon - by "AMFILM" that holds very well - gives partial coverage on the sides and works well with a number of different cases....
I think we are have abouot the best we can get right now - Whitestone for those that want the most - and others like the AMFILM I mentioned (Or the ones in the OP) for those that don't like doing the Whitestone install....
Click to expand...
Click to collapse
i wouldn't pay $50 for Whitestone dome when I've done it my self for a fraction of the cost.
I guess the type of protector i am willing to use depends on the type of cases I use.
and I believe I've found a protector that covers the top, bottom and sides the way I would like it to....haven't installed it yet though but it's looking promising.
i'm currently using a magglass which actually covers more than the Whitestone dome but less than I wanted and it doesn't have that ugly round cut at the bottom and top like the Whitestone. i'm not the type to use bigassss ridiculous cases unless i expect my phone to fall 20ft. a moderate case will protect your phone from a 4 foot fall.
Honestly i don't really care about "wide variety" of cases, i use only a few types of cases so i could careless about the rest......just my preference.
so i absolutely refuse to find a "middle ground". I currently use the spigen neo hybrid and this new glass I have seems to fit perfectly almost no gap at bottom or sides judging from what i see (I guess I'll really know once I remove the current one and install it), i would guess the rhinoshield would also work.
As soon as they ship the glue cleaner i'll be doing the new install, probably do a video of it or something.
lennie said:
i wouldn't pay $50 for Whitestone dome when I've done it my self for a fraction of the cost.
I guess the type of protector i am willing to use depends on the type of cases I use.
and I believe I've found a protector that covers the top, bottom and sides the way I would like it to....haven't installed it yet though but it's looking promising.
i'm currently using a magglass which actually covers more than the Whitestone dome but less than I wanted and it doesn't have that ugly round cut at the bottom and top like the Whitestone. i'm not the type to use bigassss ridiculous cases unless i expect my phone to fall 20ft. a moderate case will protect your phone from a 4 foot fall.
Honestly i don't really care about "wide variety" of cases, i use only a few types of cases so i could careless about the rest......just my preference.
so i absolutely refuse to find a "middle ground". I currently use the spigen neo hybrid and this new glass I have seems to fit perfectly almost no gap at bottom or sides judging from what i see (I guess I'll really know once I remove the current one and install it), i would guess the rhinoshield would also work.
As soon as they ship the glue cleaner i'll be doing the new install, probably do a video of it or something.
Click to expand...
Click to collapse
Its awesome you found what you wanted - can you share a link?
Geekser said:
Its awesome you found what you wanted - can you share a link?
Click to expand...
Click to collapse
Yeah, this is the one I bought recently but haven't installed yet.
https://www.amazon.com/gp/product/B075CZV6YQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&th=1
Note, if you use big cases or cases with weird lips I highly doubt this protector will fit unless the case's lip goes over the protector (my idea is that if the case fits over the protector then it won't push it up). I don't use bulky cases so that's not really a concern to me....... here wondering if the rhinoshield case would really fit even though it has a deep lip but so far I think it would as i assume the protector would go under the lip.
as soon as amazon ships a couple things to me I'll be doing the install and some tests and to see how it fits with this waterproof case i'm buying.
I got this one Check this out at Amazon.com
Galaxy Note 8 Tempered Glass Screen, 0.33mm 9H 3D Full Coverage edge to edge fingerprint screen protector for Samsung Galaxy Note 8 https://www.amazon.com/dp/B0759V5CVS/ref=cm_sw_r_other_apa_JUWVzb0E5WFFQ
For one it went as close to edge to edge as I could find. It does have the dot matrix but it's not noticeable. It also covers most of the top and I'll post pics here
Sorry ignore these pics wrong ones
Here are the correct pics
osrix said:
Thanks NEO are they all the same or is one better than another?
Click to expand...
Click to collapse
They're all the same. My friend and I had a geek out party on Saturday and did DIY LOCA install on our phones. These feel as good as the OEM. S Pen works as good as OEM.
Neo3D said:
They're all the same. My friend and I had a geek out party on Saturday and did DIY LOCA install on our phones. These feel as good as the OEM. S Pen works as good as OEM.
Click to expand...
Click to collapse
What LOCA did you buy? I am sure the coverage capability depends on the viscosity and set capability.
hx4700 Killer said:
What LOCA did you buy? I am sure the coverage capability depends on the viscosity and set capability.
Click to expand...
Click to collapse
We ordered this: http://www.ebay.com/itm/50ml-Super-...-adhesive-for-Cell-Phone-Screen-/311578428856
We took the screen dimensions of the display and multiplied it by the thickness of the TGSP, so we got cubic millimeters. Then, converted that to milliliters and used an old teeth whitening syringe I had lying around to use the correct amount of LOCA. We used thin, clear packaging tape to seal the buttons and holes.
Neo3D said:
We ordered this: http://www.ebay.com/itm/50ml-Super-...-adhesive-for-Cell-Phone-Screen-/311578428856
We took the screen dimensions of the display and multiplied it by the thickness of the TGSP, so we got cubic millimeters. Then, converted that to milliliters and used an old teeth whitening syringe I had lying around to use the correct amount of LOCA. We used thin, clear packaging tape to seal the buttons and holes.
Click to expand...
Click to collapse
Did it make a big difference compared to a non-LOCA install of the TGSP's you listed?

Best tempered glass screen protector for Xiaomi Redmi 4x

Hi!
I just wanted to know which is, in your opinion, the best tempered glass screen protector for this device. So far I've no luck, I bought a 2.5d one that has airbags on the borders.
Opinions?
jandraht said:
Hi!
I just wanted to know which is, in your opinion, the best tempered glass screen protector for this device. So far I've no luck, I bought a 2.5d one that has airbags on the borders.
Opinions?
Click to expand...
Click to collapse
same problem here with Luanke glass (209626001) from g3arb3st, all around on 1-2cm it was like there was no glue at all, only the center part was sticking correctly.
http://s.click.aliexpress.com/e/qjEuBiE
adrenochrome25 said:
same problem here with Luanke glass (209626001) from g3arb3st, all around on 1-2cm it was like there was no glue at all, only the center part was sticking correctly.
Click to expand...
Click to collapse
This is in fact not the problem with the tempered glass. It is due to the curved glass on redmi 4x which is called as 2.5D glass which will be slightly bent at the edges. When a traditional tempered glass is applied to the screen, as the glass is flat at the center, the tempered glass adheres perfectly, while the ends are bent but the tempered glass is not. This is the reason the tempered glass always leaves air gaps at the edges. I would prefer the old school model plastic screen protector that is available on mi.com for our beloved redmi 4x. Just give it a try and you won't even feel like you have a screen protector on the screen. The only intention in this screen protector is to protect the screen from scratches that are likely to appear due to object playing around in the pockets along with the phone. This screenguard will not protect the screen from drops. You will definitely need to rely on your luck about breaking the glass from waist height of an average height guy.
thanks for your reply
i know about the 2.5D (or rounded edges) of the Redmi4x, but in my case the glass manufacturer circumvented to this problem by making protective glasses slightly smaller than the phone glass like 3mm on each border, so beside the increased difficulty to position it, it should have skipped the edges radius. But even with the 3mm skip i still had non sticky parts. (sku 209626001 from gearbest)
Indeed plastic models should minimise this issue but they are so soft ! After one week in the pocket with scratching things like keys they look so bad that they are already good to be replaced. So except if some technological revolution happened for plastic screen protector since the Mi2/S time, i think i'll live without screen protection at all
yyyoel said:
http://s.click.aliexpress.com/e/qjEuBiE
Click to expand...
Click to collapse
This one is excellent too Im still on my first after 5 monthsand still perfect, and its much cheaper
https://www.aliexpress.com/snapshot/0.html?orderId=87954696635076&productId=32832655061
MadMicro said:
This one is excellent too Im still on my first after 5 monthsand still perfect, and its much cheaper
https://www.aliexpress.com/snapshot/0.html?orderId=87954696635076&productId=32832655061
Click to expand...
Click to collapse
Ok thanks
Im using one of that "hybrid" screen protectors, the center is made of tempered glass and the edges made of some durable material, one claims for carbon fibers, the other for Kevlar. sorry i do not have a link for what i bought, but it looks exactly like the one in that link : https://www.aliexpress.com/item/10pcs-lot-For-Xiaomi-Redmi-4X-3D-Carbon-Fiber-Screen-Film-Anti-Scratch-Tempered-Glass-Screen/32821140687.html?spm=2114.search0104.3.29.uQibKQ&ws_ab_test=searchweb0_0,searchweb201602_4_10152_10151_10065_10344_10068_10345_10342_51102_10343_10340_10341_10609_10541_10084_10083_10307_10312_10313_10059_10314_10534_100031_10604_10103_10605_10594_10107_10142,searchweb201603_12,ppcSwitch_5&algo_expid=72b8e48c-88c1-4470-9f38-f193a555b5e0-4&algo_pvid=72b8e48c-88c1-4470-9f38-f193a555b5e0&rmStoreLevelAB=5
it comes with colored edges, gold, black and white so you can use black or gold on white phone and vice versa. because the edges made of flex material, it sits perfect on the screen and have a nice curve edges all round. my have 98% coverage of the original screen, there is a 0.2 mm of gap between the two. in use on my device for about two month's now, having two falls on asphalt from about 70 cm, right on the corner, nothing happens yet. no scratches yet, as i say, i don't have a link for what i bought, i remember it was an unknown Chinese brand. hope it helps.
Why are all of the links aliexpress? (i don't have a problem with it just i prefer ebay/amazon)
DeblaGaming said:
Why are all of the links aliexpress? (i don't have a problem with it just i prefer ebay/amazon)
Click to expand...
Click to collapse
Isn't it the cheapest that way? Just thinking.
Also, about topic - what do You think about 3mk 3D flexible glass for RN4X? Is it worth it? I would love to get as much protection as possible since I basically drowned my previous phone (UMI C Note) in worktime when I was washing 1 cubic meter containers with the pressure cleaner. Phone was in my pocket all the time, but just small stream of water on fingerprint scanner (inb4 you are a dumbass) ruined everyting.
Nanoedge Full Cover Screen Protector for xiaomi redmi 4x Gold Protective Layer Clear Use Layer TPU Screen Protective Film
https://www.aliexpress.com/item/Nan...260.html?spm=a2g0s.13010208.99999999.6.nfIiZj
buczek0711 said:
Isn't it the cheapest that way? Just thinking.
Also, about topic - what do You think about 3mk 3D flexible glass for RN4X? Is it worth it? I would love to get as much protection as possible since I basically drowned my previous phone (UMI C Note) in worktime when I was washing 1 cubic meter containers with the pressure cleaner. Phone was in my pocket all the time, but just small stream of water on fingerprint scanner (inb4 you are a dumbass) ruined everyting.
Click to expand...
Click to collapse
Hi buczek,
have you tried the mentioned above FlexibleGlass? What are your thoughts on it?
there are much different quality of tempered glass in the market. some of tempered glass screen protector is with poor adhesive glue, it's easy to come off. some tempered glass screen protector is easy to be broken. our company supply high quality tempered glass screen protector, it's with high adhesive A/B glue, up to 9H hardness tempered glass material, anti scratch and anti shatter, protect your screen effectively.
more info: weaccessory dot com
Shenzhen Western Electronic Co., ltd
Here in New Delhi I am able to get a variety of glass based screen protectors costing between ₹15-₹50 per piece. Yes they aren't as effective as those super costly ₹800 one 's but still are very good. It's just that they don't come in any fancy packaging and cleansing wipes
use nano glass,its good fit
Can anyone recommend a tempered glass that has not an insane amount of reflection effect? I bought one from a seller on Ali and it is just like a mirror, making it more annoying to use and harder to see in the sun. ali or ebay
tangoviking said:
Can anyone recommend a tempered glass that has not an insane amount of reflection effect? I bought one from a seller on Ali and it is just like a mirror, making it more annoying to use and harder to see in the sun. ali or ebay
Click to expand...
Click to collapse
Seconded.
The same happened to me. Also it gets dirty very easily and make the screen significantly darker.
I use these. They fit perfectly.
https://www.aliexpress.com/item/2pc...tector-film-full-cover-black/32809037642.html
There's no quality screen protectors made from glass available for this model. I already spent like 50$ on them and none of them lasted long and all of them was defective in one or other way. The first one I bought (from Mocolo) with colored edges did come off on it's own after about a week of very light use. Do yourself a favor and listen to my advice... Buy some plastic screen film instead of this cheap crap and save yourself a lot of nerves and money.

at last I have a great glass screen protector

It's perfect
Hey man; the video isn't working.
"Playback ID: dya1cHesv2Xe1n3j"
Congratulations
thedarkmunk said:
Hey man; the video isn't working.
"Playback ID: dya1cHesv2Xe1n3j"
Click to expand...
Click to collapse
Someone else on android-central posted this link:
https://www.youtube.com/watch?v=rt8ISby9g-M
Thanks almighty1 I don't know why my link doesn't play.. I'm in Thailand maybe that's the reason.
When I tap my link it plays fine and many people in the USA have watched it... Strange
magichoward, thanks for the videos. I don't think it has to do with you being in Thailand since the same link I posted doesn't work when it displays the youtube player in the forum whether here or androidcentral with that same error but works fine as a link.
just ordered a tube of that uv glue and a tempered glass from that site.
been looking for an alternative to whitestone. its my second install and the damn glass is lifting again in the side about mid height.
hope this gorilla brand yeild better and longer lasting results.
magichoward said:
It's perfect
Click to expand...
Click to collapse
That matte S7 screen protector looks amazing. Subscribed to your channel.
Sent from my SM-N950U using Tapatalk
bober10113 said:
just ordered a tube of that uv glue and a tempered glass from that site.
been looking for an alternative to whitestone. its my second install and the damn glass is lifting again in the side about mid height.
hope this gorilla brand yeild better and longer lasting results.
Click to expand...
Click to collapse
How did that turn out?
There are now really good entire self adhesive curved tempered glass protectors, the ones with only borders glue were garbage, I bought one MOSS brand, it is perfect, even ordered 2 more as spares some 8 dlls a piece
winol said:
There are now really good entire self adhesive curved tempered glass protectors, the ones with only borders glue were garbage, I bought one MOSS brand, it is perfect, even ordered 2 more as spares some 8 dlls a piece
Click to expand...
Click to collapse
Where did you get it, pal? Can you share a link, please?
Can you send link. Thanks
I got a Nillkin 3D Curved Tempered Glass from ebay a week ago and so far it seems very good. Its easy to install and goes well with my cover (Mofi from aliexpress).
rjma said:
I got a Nillkin 3D Curved Tempered Glass from ebay a week ago and so far it seems very good. Its easy to install and goes well with my cover (Mofi from aliexpress).
Click to expand...
Click to collapse
Can you share specific links please?
I didn't know said:
Can you share specific links please?
Click to expand...
Click to collapse
Actually just order another one (this time from aliexpress) because I droped my note 8 and the screen protector broke... could've been worse.
Nillkin Screen Protector: https://s.click.aliexpress.com/e/blpSsJVq
Mofi case: https://s.click.aliexpress.com/e/g2P7RcM
rjma said:
Actually just order another one (this time from aliexpress) because I droped my note 8 and the screen protector broke... could've been worse.
Nillkin Screen Protector: https://s.click.aliexpress.com/e/blpSsJVq
Mofi case: https://s.click.aliexpress.com/e/g2P7RcM
Click to expand...
Click to collapse
You are a lucky men, better break 10 thousands protectors than the screen, if you have to replace the screen you loose the water resistance.
Also I wanted to see the case front , aliexpress don't show it in any photo.
I didn't know said:
Also I wanted to see the case front , aliexpress don't show it in any photo.
Click to expand...
Click to collapse
Here you go.
I also have a ringke onyx case that gives better protection but can't use it with this glass because they touch in the corners.
Got fed up with dust in the corners of the glass screen protector.. Now naked

Mi Note 3 Tempered Glass, Full Cover

I've ordered at about 5-6 Tempered Glass for our Mi Note 3, and it wasn't easy to find one which fitted our phone perfectly. If you'll order one, than search for 'full cover'
This one fitted our display perfectly and is rounded and cheap, too:
https://de.aliexpress.com/item/LITB...-Xiaomi-anmerkung3-Glas-Film/32846070628.html
Yep, finally gave up searching for a fully transparent one as none fits edge to edge, ended up buying the one you posted and somewhat satisfied because it covers edge to edge, albeit the precision is a bit questionable and the matte finish gives different impression of blue (it's more like purple). NVM, my back cover is protected with a transparent TPU case and I can still myself in the "mirror" which is very helpful for back camera selfie (I love to do that because pixel2mod front camera won't work in advanced features like bokeh).
I have a few ones`s: At the moment i use one 9H tempered, and with colour blue. Not the qualith of a Ultimate Shield or Nilkellin, but it works so far...
And covers all screen.
Im using this for my Blue model:
https://www.gearbest.com/screen-protectors/pp_1412259.html
Of course is not a Nilkellin or Ultimate Shield, but covers it all.
My tempered glass
Where did you buy it from?
Gogentle97 said:
My tempered glass
Click to expand...
Click to collapse
Where did you buy it? What brand is the tempered glass?
John Wiliam said:
Where did you buy it? What brand is the tempered glass?
Click to expand...
Click to collapse
Gogentle97 said:
I brought it in Taobao and I don't think it can spam oversea outside of China. It need special oil to fix 2.5d glass problem which is liquid but become solid when dry.
Link:
http://m.tb.cn/h.WvKQuxW
http://m.tb.cn/h.WvJERxN
Click to expand...
Click to collapse
Since mi note3 has curved edges, I bought soft protectors form taobao. Glass protectors dont fit very well.
Ace case do a tempered glass one that fits the corners perfectly. The main issue with it is that only the top and bottom coloured sections have glue on. Hard to explain but the part coving the screen doesn't so the slight air gap does effect viewing quality after a month or two.
I just got a ace case invisible screen protector to replace the tempered glass one and it is excellent. Obviously it won't protect as well from a large fall but I think it should still do a good job.
It's a soft plastic screen protector that you apply wet to the phone and it drys out after a few hours. Perfect fit and the quality is excellent. Feels good under the fingers and is very resistant to smudges. I'm really impressed so far.
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/382360628993

Categories

Resources