Database Develop

Is there ANY tempered glass screen protector that's great with Note 5??

Ok, I've looked through forums, threads here and there, Amazon, manufacturer sites, web searches... and my takeaway is that glass protectors for the Note 5 are a problem... in particular the protectors don't fully cover the screen (just the flatter part) and there are halo effects. The non-curvature issue can also cause dust to accumulate, apparently, by getting into the edges.
Is there, in fact, ANY really great tempered glass screen protector that does the job?? One that fully fits the curves along of the Note 5's screen, has non-sharp edges, and isn't a headache to install or otherwise deal with? I see the same type complaints whether the glass protector is inexpensive or at the high-price end.
I have a new Note 5 arriving next week, and I'd love to know which are the top choices. Or, because of the curved screen, front side, is this just a holy grail search never to be reached?

My guess is that once manufacturer's continue to get feedback they will fix the issue, but it will take time and feedback from consumers. The device is fairly new so I would say in about another month or so the issues Should, or so I would hope, be ironed out. If you cannot wait, I would suggest getting a case with a built in screen protector. Give Artech21 a jingle, they have a case with a built in screen protector, and I believe they are still looking for testers for their cases. I am going to be receiving mine whenever they ship. At the moment it seems like September 30th, at least according to Amazon, but I hope to get one sooner than later.
Either way, a decent case and being careful will go far to help deal with your screen until, either manufacturers fix the issues, or you can get a case with a built in screen protector.

I bought the tempered glass screen protector at the T-Mobile store. Forget the brand, but came in a big green box, with a roller and bed like thing to put the phone in, and apply it dummy proof easy. It is on clear and zero bubbles, and can barely even see the protector whatsoever.

Skinomi.com is where I purchased mine. Absolutely perfect for my Tab S so I made the purchase for the Note. Also perfect in every way! I paid around 7 bucks through ebay
Sent from my SM-N920V using Tapatalk

Using an ismooth thats is awesome. Zero halo on it.

Zorachus said:
I bought the tempered glass screen protector at the T-Mobile store. Forget the brand, but came in a big green box, with a roller and bed like thing to put the phone in, and apply it dummy proof easy. It is on clear and zero bubbles, and can barely even see the protector whatsoever.
Click to expand...
Click to collapse
This is the screen protector your talking about http://www.pure-gear.com/shop-by-de...oll-on-kit-biodegradable-samsung-devices.html, Also cheaper direct through manufacturer by about $15. At any rate it looks like a good screen protector and very easy to apply. I may give it a shot once I get my device sorted out.

The Zagg glass from Verizon is a perfect fit, but if you have to be insanely accurate. If you are, the results are amazing. I read on another thread that version Best Buy carries does not fit well so I went straight to Verizon. Yes it's pricey but worth it. I'm used to staying under $15 for a glass one for my last few purchases. I purchased 2 backups (different manufacturers) for $3 total from Amazon with coupon codes, but it's good to know I won't need them. Let me know if you need pictures.
edit: For the most part, halos are causes by wrong cuts or if you are off by a hair in either direction. If applied correctly with the right brand, it should cover 100% of the flat area before the curve.

Thanks!
Pictures would be great!
Also... thanks everyone for the input so far! For the above-mentioned glass protectors, do they cover the curved part of the screen in a form-fitting way?
In the meanwhile, I've ordered from Amazon a couple of glass screen protectors as an inexpensive first step solution awaiting products that subsequently come out that may take advantage of user stories/input. The two are: (1) IVSO with lifetime warranty and (2) YooTech with lifetime warranty.
I also ordered three Note 5 cases from Amazon to try: (1) Spigen Air Cushion Slim Armor Case, Champagne Gold, model SGP11687; (2) Spigen Neo Hybrid Carbon Case, Gunmetal, model SGP11689; and (3) Urban Armor Gear Case, Black.

Unless I have totally overlooked it, you won't find a protector that covers the curve in a glass form. It wouldn't be physically possible since the glass protectors do not have any bend/give at the ends to cover the edges of the screen.

Looks to be possible
I wonder what might be the engineering reason for not producing a curved tempered glass screen protector. Cost perhaps? For example the screen itself is curved, why can't the protector be formed (molded in a sense) to mate to that? Search on "curved tempered glass" and you'll see that it is possible to create curved tempered glass.
Also, look up: "Cinder .2 mm Gorilla Glass Screen Protector for iPhone 6/6+" on YouTube (I'm new to XDA, can't post links yet!). This protector IS curved on the edges to follow the form of the phone. I'd love to see this for Note 5!
The Cinder is from Cupert. Check out Cupert (period) com.

malickie said:
This is the screen protector your talking about http://www.pure-gear.com/shop-by-de...oll-on-kit-biodegradable-samsung-devices.html, Also cheaper direct through manufacturer by about $15. At any rate it looks like a good screen protector and very easy to apply. I may give it a shot once I get my device sorted out.
Click to expand...
Click to collapse
i'm using this on my Note5, and so far, it's has the least amount of "halo" effect. probably .5 mm or less and barely noticeable unless you're looking for it; i can live with that for now. (see picture below) i used a T-Mo discount to purchase and have installed in the store. was told as long as i have my receipt they'll replace it if there's significant "halo".
EDIT: add picture

cortez.i said:
i'm using this on my Note5, and so far, it's has the least amount of "halo" effect. probably .5 mm or less and barely noticeable unless you're looking for it; i can live with that for now. (see picture below) i used a T-Mo discount to purchase and have installed in the store. was told as long as i have my receipt they'll replace it if there's significant "halo".
EDIT: add picture
Click to expand...
Click to collapse
Is this a glass or plastic protector? Their website mentions, "Smooth as glass"

LiquidCowbell said:
Is this a glass or plastic protector? Their website mentions, "Smooth as glass"
Click to expand...
Click to collapse
see picture

Zero haloing. It might look that way because of the angle I shot it (6 plus camera .. sadface)

Supersheild works fine.

Mixed reviews + hope for the future
For all of the above-mentioned glass screen protectors, when I look at their Amazon ratings, I see overall a mixed set of reviews, primarily around halo issues and the screen not fitting enough of the Note 5's glass, and with some users having complaints about installation. My conclusions so far: that this represents what's currently on the market. However, presumably there's hope for a better product, e.g., a Gorilla Glass thin, sleek glass protector that curves to edges and fully form fits the entire screen, as is the case with the Cinder product made for the iPhone (in which instance the holy grail seems to have been found). We now know that this appears to be possible for a large curved device (see the Cinder references/web site I mentioned above).
My hunch is that a fully form-fitting glass protector would also provide better shock protection for the screen versus one that doesn't fully mate to the screen, curves and all.

Zorachus said:
I bought the tempered glass screen protector at the T-Mobile store. Forget the brand, but came in a big green box, with a roller and bed like thing to put the phone in, and apply it dummy proof easy. It is on clear and zero bubbles, and can barely even see the protector whatsoever.
Click to expand...
Click to collapse
Can you confirm if it's actually glass? I was going to buy it (not from tmobile, $40 is robbery) but the "flexible" part is what threw me off. How can a tempered glass SP be flexible? The mfg website states that it's made of Polyethylene Terephthalate (PET).

shouren04 said:
Can you confirm if it's actually glass? I was going to buy it (not from tmobile, $40 is robbery) but the "flexible" part is what threw me off. How can a tempered glass SP be flexible? The mfg website states that it's made of Polyethylene Terephthalate (PET).
Click to expand...
Click to collapse
Really not 100% sure if it's true glass ?
http://www.pure-gear.com/puretek-roll-on-kit-antibacterial-antiglare-anti-fingerprint.html

Zorachus said:
I bought the tempered glass screen protector at the T-Mobile store. Forget the brand, but came in a big green box, with a roller and bed like thing to put the phone in, and apply it dummy proof easy. It is on clear and zero bubbles, and can barely even see the protector whatsoever.
Click to expand...
Click to collapse
I got the same one and yes it is dummy proof but the sides don't lay flat. It also gets greasy really easy. I've used this one http://www.amazon.com/Protector-Tem...pebp=1441665200689&perid=1CDB4C1PX00MRMTNJ7SD on other devices and it seems to work a lot better.

XtremeGuard. $7. Fast shipping. Great fit

Looking for full body case S7 EDGE

Hello. I am looking for full body case for S7 EDGE. On my iphone 6 I'm using this case:
http://www.ebay.co.uk/itm/iPhone-6-...215370?hash=item1ead0b434a:g:LeIAAOSwu1VW5rU1
Which gives me dust and shock protection. Also is cheap. Do You know similar case for s7 edge?

Since your link was for the UK eBay, I'm linking an Amazon UK
Supcase S7 Edge Full Case
Enjoy!

I've used Unicorn Beetle cases on my last 3 phones and won't use anything else now
https://www.amazon.co.uk/Samsung-Re...139723&sr=8-1&keywords=s7+edge+unicorn+beetle
Survived 3 drops now including a face down on a stone covered carpark

jester350 said:
I've used Unicorn Beetle cases on my last 3 phones and won't use anything else now
https://www.amazon.co.uk/Samsung-Re...139723&sr=8-1&keywords=s7+edge+unicorn+beetle
Survived 3 drops now including a face down on a stone covered carpark
Click to expand...
Click to collapse
Is there screen shield on the front panel?

How about Otterbox Defender?

I am looking for case with front panel shield, not back only.

https://www.punkcase.com/collection...water-shock-dirt-snow-proof-lifetime-warranty Ordered it & awaiting its arrival.

S3MyLove said:
https://www.punkcase.com/collection...water-shock-dirt-snow-proof-lifetime-warranty Ordered it & awaiting its arrival.
Click to expand...
Click to collapse
Woow looks very good, but a bit expensive

troxter said:
Woow looks very good, but a bit expensive
Click to expand...
Click to collapse
Looks good?
I'm sure it's very effective though.

troxter said:
Is there screen shield on the front panel?
Click to expand...
Click to collapse
nope you'll need to buy that separately if you want one

Just received the Ghostek Atomic 2.0 Case. Even though Screen is not glass does not feel that back. No stickiness like plastic films. But for now just had it on for some hours so can't really say for long run yet.
It is a bit wider like a little over 1/4" more than the UAG case. Which adds to black borders on the front as seen on the pictures. So if you already had trouble using it with one hand, this would cause a bit more trouble.
The thickness is about the same as the UAG case when both are facing screen down.
This case advertises Waterproof but has 2 openings for the speaker grill on top and the home button on bottom. I would expect water could get in through those openings. Screen is dot matrix.
The look of the case for me is nice and does not make it look ugly in my perspective. As because the screen guard as they call it make it look like the screen is showing more than some cases that adds front black plastic borders on top and bottom.
The one thing is you might want to use wireless charging more due to having to open up ports more often if using a usb charger.
Here are some pictures I took. Sorry about quality. The best Camera I have is the GS7 edge. lol.
http://imgur.com/a/osNxm
Right now I'm using it with the TANAAB Screen protector.
I'll post more about it. But first reactions seems to be a good case but would depend on how you would see it and if the 1/4" width bigger than a UAG case would be a drawback or not.
It Seems that Ghostek send several out to Mobilefun or Uviyo in batches but haven't shipped through their main site.
Update:
Update about the openings mentioned above. The waterproof works and does not get inside case if there's nothing that raises the area where the openings are. I had the TANAAB TGSP that doesn't go full length of the phone let water in but when removed and tested no water went in. So waiting to test it with a similar TGSP like GPEL2 that fully extends the the phone and see how that works.
When With TANAAB. Sensitivity didn't change and could provide good protection if needed as the outside screen is just a thin plastic film.
Just wanted to point this out.

Suggestions for screen protector

Decided I shouldn't go without a screen protector, looks like the tempered glass ones won't work well because the screen in curved on the edges. Anyone have experience with or can recommend a good one? I often see suggestions on here that I couldn't find on my own and I'm thinking one of you guys can help.
By the way i went with this case:
https://www.amazon.com/gp/product/B01M15T2I3/ref=oh_aui_detailpage_o02_s01?ie=UTF8&th=1
I like it except that the camera and volume buttons aren't cut outs. It fits the phone well.
I appreciate any suggestions.

Same boat as you. The ones offered Amazon all seem to complain about them being too thin, bezel to bezel.

The only one that I have found for the phone that fits properly so far is listed below. It's not glass but works great.
https://www.amazon.com/Protector-Skinomi-TechSkin-Coverage-Anti-Bubble/dp/B01LZB8LHP/ref=sr_1_1?ie=UTF8&qid=1478304589&sr=8-1&keywords=xperia+x+compact+skinomi
I actually purchased the full body coverage kit and it covers everything as well.
https://www.amazon.com/Compact-Protector-Skinomi-TechSkin-Coverage/dp/B01M19KUYQ/ref=sr_1_2?ie=UTF8&qid=1478304737&sr=8-2&keywords=xperia+x+compact+skinomi

Halftrack said:
The only one that I have found for the phone that fits properly so far is listed below. It's not glass but works great.
https://www.amazon.com/Protector-Skinomi-TechSkin-Coverage-Anti-Bubble/dp/B01LZB8LHP/ref=sr_1_1?ie=UTF8&qid=1478304589&sr=8-1&keywords=xperia+x+compact+skinomi
I actually purchased the full body coverage kit and it covers everything as well.
https://www.amazon.com/Compact-Protector-Skinomi-TechSkin-Coverage/dp/B01M19KUYQ/ref=sr_1_2?ie=UTF8&qid=1478304737&sr=8-2&keywords=xperia+x+compact+skinomi
Click to expand...
Click to collapse
Would you mind posting some pictures of your screen protector? I'd love to see it.

hikihibiki said:
Would you mind posting some pictures of your screen protector? I'd love to see it.
Click to expand...
Click to collapse
Not a very good pic. Just used an old phone I had laying around buy hopefully it gives you some idea of how it sits.
http://www.dumpt.com/img/viewer.php?file=mcavzh8s6o1d51d9c95j.jpg

Hi, Nillkin has great glass & cases, they offer a discount today.
http://nillkin.org/smartphones-acce...ccessories/sony-xperia-x-compact-accessories/

olegfusion said:
Hi, Nillkin has great glass & cases, they offer a discount today.
http://nillkin.org/smartphones-acce...ccessories/sony-xperia-x-compact-accessories/
Click to expand...
Click to collapse
Nillkin has crappy cases for F5321 that offer little more than scratch protection, and you're incessant advertising for them across the all the device boards is obvious, so you can hardly be considered objective. Please go troll your mother and go away. There are people here looking for serious solutions.

Halftrack said:
The only one that I have found for the phone that fits properly so far is listed below. It's not glass but works great.
https://www.amazon.com/Protector-Skinomi-TechSkin-Coverage-Anti-Bubble/dp/B01LZB8LHP/ref=sr_1_1?ie=UTF8&qid=1478304589&sr=8-1&keywords=xperia+x+compact+skinomi
I actually purchased the full body coverage kit and it covers everything as well.
https://www.amazon.com/Compact-Protector-Skinomi-TechSkin-Coverage/dp/B01M19KUYQ/ref=sr_1_2?ie=UTF8&qid=1478304737&sr=8-2&keywords=xperia+x+compact+skinomi
Click to expand...
Click to collapse
I decided to go with the Skinomi as well, put it on my XC yesterday. Very happy with the results, it's been a while since I have used a non-tempered glass screen protector and for some reason I was expecting the touch screen to be hard to use and the experience generally unpleasant. This wasn't the case and it fits perfectly. recommended.

Anyone try one of those 3d glass ones from gcolor on Amazon? They also have this flexible carbon fiber type one too

tlxxxsracer said:
Anyone try one of those 3d glass ones from gcolor on Amazon? They also have this flexible carbon fiber type one too
Click to expand...
Click to collapse
I saw those but have seen to many negative things about G Color protectors to ever try one out myself. Lots of videos on youtube about them being crap.

I got these ones from ebay and they're a perfect fit. Quite easy to apply and cover right to the edge of the curved screen.
Worthwhile watching the video before starting. It's been on a few weeks now and no finger marks and the feel is good
http://m.ebay.co.uk/itm/3x-FULL-SCR...a-X-Compact-/192005482767?txnId=1333331596009
Sent from my F5321 using XDA Free mobile app

I ordered one of those g color protectors yesterday. I'll be that guy that tests it. Should get it sunday. If its moot I'll try that skinomi one. I kinda want the skinomi one just for the rear protector.
edit: Ok got it in yesterday. Packaging was nice and it came with the normal included things. Putting it on was kind of a pain in the ass. This was mostly contributed to the curved screen but it is doable with some patience. I messed up putting it on the first time and lifted it up gently and repositioned it. The adhesive was just as sticky as the first time so there is room for error. I have a cheap jelly case off amazon on it currently until my devil case comes in from overseas but it does not have any conflict with the screen protector as long as you get it on next to perfect.
Clarity is good except for one small small detail and another really annoying detail. The small detail is you can see a line around the boarder between the glass and the "carbon fiber". While annoying I can understand that it's 2 different materials and I don't see how you couldn't have that problem. The really annoying one is it cuts off some pixels on both sides of the screen. It isn't really noticeable until i use reddit sync which then when viewing the comments it becomes apparent. It kinda irritates me but for the moment I'd rather have a couple of blocked off pixels then the screen exposed.
I give it a 6/10 mostly because of the cut off pixels. If it wasn't for that my initial rating would be more of a 8 or a 9/10. I will comment later on down the road if I experience the adhesive pulling up.
pics

enjoimadcow said:
I ordered one of those g color protectors yesterday. I'll be that guy that tests it. Should get it sunday. If its moot I'll try that skinomi one. I kinda want the skinomi one just for the rear protector.
edit: Ok got it in yesterday. Packaging was nice and it came with the normal included things. Putting it on was kind of a pain in the ass. This was mostly contributed to the curved screen but it is doable with some patience. I messed up putting it on the first time and lifted it up gently and repositioned it. The adhesive was just as sticky as the first time so there is room for error. I have a cheap jelly case off amazon on it currently until my devil case comes in from overseas but it does not have any conflict with the screen protector as long as you get it on next to perfect.
Clarity is good except for one small small detail and another really annoying detail. The small detail is you can see a line around the boarder between the glass and the "carbon fiber". While annoying I can understand that it's 2 different materials and I don't see how you couldn't have that problem. The really annoying one is it cuts off some pixels on both sides of the screen. It isn't really noticeable until i use reddit sync which then when viewing the comments it becomes apparent. It kinda irritates me but for the moment I'd rather have a couple of blocked off pixels then the screen exposed.
I give it a 6/10 mostly because of the cut off pixels. If it wasn't for that my initial rating would be more of a 8 or a 9/10. I will comment later on down the road if I experience the adhesive pulling up.
pics
Click to expand...
Click to collapse
Lol, I am positive I saw your review on Amazon when I left mine (we also have the same case). Anyhow, although I disagree with the installation, I agree with everything else. Installation for me was slightly confusing, but really easy once I understood what to do. Air bubbles were a pain to get out, but that's to be expected. As for the quality, it's perfectly fine except for your two points. Mostly your second point: the pixel cutoff. While definitely bearable and not very noticeable most of the time, in certain apps it really is irritatingly noticeable. I would have to recommend against getting this screen protector and waiting until a better one comes out. I'm keeping it on until I find a really good case and/or a better glass screen protector.

Has anyone tried the Nillkin "Amazing H tempered glass screen protector"? Would really like to know if it's any good because I enjoy their frosted case.

Looks like Devilcase now offers a curved glass screen protector: http://www.twdevilcase.com/en/index.php?menu=prod_detail&mid=21&did=7&pid=5280&list=class
BTW, their case for this phone is really thick. Not as stylish as their early, asymmetrical cases :/

asmad said:
I got these ones from ebay and they're a perfect fit. Quite easy to apply and cover right to the edge of the curved screen.
Worthwhile watching the video before starting. It's been on a few weeks now and no finger marks and the feel is good
http://m.ebay.co.uk/itm/3x-FULL-SCR...a-X-Compact-/192005482767?txnId=1333331596009
Sent from my F5321 using XDA Free mobile app
Click to expand...
Click to collapse
This is not great, but is the best I've found so far. It's not got perfect adhesion on the edges, but I've tried the super soft screen protector, flat glass and curved glass with glue only on the edges so dirt gets under it. I'd love to find a curved glass one that has glue all over it instead of just a tiny but around the edges.

I'm also looking for a curved screen protector that "glues" properly (direct contact) to the entire screen, not just the edges.
It doesn't have to be tempered glass either, simple cheap TPU would work fine.
The ebay one mentioned above doesn't ship outside of UK, so it's no good for me.

jayarmstrong said:
Looks like Devilcase now offers a curved glass screen protector: http://www.twdevilcase.com/en/index.php?menu=prod_detail&mid=21&did=7&pid=5280&list=class
Click to expand...
Click to collapse
I have a problem with that screen protector, it turns proximity sensor always on, so you can't access the phone in call.
When I removed the devilcase curved glass screen protector, the proximity sensor starts to work again.
Seems that roxfit screen protector has similar issue.
https://talk.sonymobile.com/t5/Xper...-on-gt-black-screen-during-phone/td-p/1203936

The best case/screen protector in my experience

I have tried many accessories and I can say that most of the screen protectors suck. in my experience the best glass screen protector is http://www.ebay.co.uk/itm/351988284417?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT - this screen protector is absolutely amazing and its only drawback is the size, it doesn't cover the sides well enough.
As for the best case my award goes to http://www.ebay.co.uk/itm/351988284417?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT - It is thin, it feels great, the cutouts are perfect and the best part is what they have done with the vol/power buttons. they didnt make cut outs instead they are covered in silicon which makes it much much much easier to hit those buttons. compared to nillkin this outperforms it since it covers more phone space, has more accessible buttons, has a slightly bigger screen lip (the lip doesn't portrude much) and is cheaper.
I hope I have helped, if you have any questions please ask.

bozy09 said:
I have tried many accessories and I can say that most of the screen protectors suck. in my experience the best glass screen protector is http://www.ebay.co.uk/itm/351988284417?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT - this screen protector is absolutely amazing and its only drawback is the size, it doesn't cover the sides well enough.
As for the best case my award goes to http://www.ebay.co.uk/itm/351988284417?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT - It is thin, it feels great, the cutouts are perfect and the best part is what they have done with the vol/power buttons. they didnt make cut outs instead they are covered in silicon which makes it much much much easier to hit those buttons. compared to nillkin this outperforms it since it covers more phone space, has more accessible buttons, has a slightly bigger screen lip (the lip doesn't portrude much) and is cheaper.
I hope I have helped, if you have any questions please ask.
Click to expand...
Click to collapse
Pls relink your second link because copy of first link , thx

Money8z said:
Pls relink your second link because copy of first link , thx
Click to expand...
Click to collapse
my bad here it is http://www.ebay.co.uk/itm/262987701...49&var=561994911545&ssPageName=STRK:MEBIDX:IT

Can you post a photo with your tempered glass on the phone?

FlatOutRU said:
Can you post a photo with your tempered glass on the phone?
Click to expand...
Click to collapse
I would but I peeled it off to try other protectors and now I'm using a different one that covers more screen but has bubbles all around it. I would buy the old one again but it'll be a waste to just throw this one away even if the bubbles annoy me. The screen protector that I recommended here is great, doesn't leave any bubbles and feels amazing. Only problem is that it leaves 0.3cm out on each side which isn't too bad but it does leave a lot exposed. It's the best one you could buy and works great with the case that I also recommended. The review on the link was left by me by the way. I hope I helped.

check this out, i tried it and is pretty good, it fully covers the phones face. But gotta install it well unlike me
http://www.gearbest.com/screen-protectors/pp_519513.html

I finally found a screen protector that works for me. It's fully transparent (no adaptive brightness issue) and it does cover the left and right sides of the screen. There is a small 3mm gap on the top/bottom edges but its not annoying. also I had to use the included oil to remove the halo all around the edges. Here's the link:
Tempered Glass For XIAOMI MI5S Plus Screen Protector Anti Scratch Phone Protector For Glass XIAOMI Mi 5S Plus Protector Flim
http://s.aliexpress.com/QFjeaYvE
(from AliExpress Android)

myogui said:
I finally found a screen protector that works for me. It's fully transparent (no adaptive brightness issue) and it does cover the left and right sides of the screen. There is a small 3mm gap on the top/bottom edges but its not annoying. also I had to use the included oil to remove the halo all around the edges. Here's the link:
Tempered Glass For XIAOMI MI5S Plus Screen Protector Anti Scratch Phone Protector For Glass XIAOMI Mi 5S Plus Protector Flim
http://s.aliexpress.com/QFjeaYvE
(from AliExpress Android)
Click to expand...
Click to collapse
This looks absolutely fantastic, cafele seems to be a good brand seeing as how they make such quality cases and screen protectors. I wonder if they sell the gel separately? Also what is the quality of the screen protector like? Is it oleophobic? If the screen protector isn't good then I would like to buy the gel separately and use it on a nilkin protector. Thank you for sharing this!

How do you use the oil to remove the halo?

bozy09 said:
I would but I peeled it off to try other protectors and now I'm using a different one that covers more screen but has bubbles all around it. I would buy the old one again but it'll be a waste to just throw this one away even if the bubbles annoy me. The screen protector that I recommended here is great, doesn't leave any bubbles and feels amazing. Only problem is that it leaves 0.3cm out on each side which isn't too bad but it does leave a lot exposed. It's the best one you could buy and works great with the case that I also recommended. The review on the link was left by me by the way. I hope I helped.
Click to expand...
Click to collapse
You mean, like 0.3mm out, right? 0.3cm (i.e., 3mm) seems quite a lot. And doesn't it create the halo effect due to that?
I had several units of this brand in the past for the Mi4c but they were crashing all the time, without apparent reason.
Regarding the case you recommend, from Cafele brand, is it proeminent in front so it properly protects the screen when the phone is turned face down? From the picture in the ebay it seems not, but those pictures are not real actually.
Currently I have this case of brand Luanke from Gearbest, which seems very solid and thus protect the phone very well, volume and power buttons work better than without case (same as you described with yours) while giving a nice look, but I find it a little unconfortable in hand due to not so smooth edge cuts:
gearbest.com/cases-leather/pp_631798.html
As you can see in the pictures, the case has is least 1mm larger than the phone in the front side. How is yours regarding this matter? If you could post a picture it would be nice.

silmarx said:
You mean, like 0.3mm out, right? 0.3cm (i.e., 3mm) seems quite a lot. And doesn't it create the halo effect due to that?
I had several units of this brand in the past for the Mi4c but they were crashing all the time, without apparent reason.
Regarding the case you recommend, from Cafele brand, is it proeminent in front so it properly protects the screen when the phone is turned face down? From the picture in the ebay it seems not, but those pictures are not real actually.
Currently I have this case of brand Luanke from Gearbest, which seems very solid and thus protect the phone very well, volume and power buttons work better than without case (same as you described with yours) while giving a nice look, but I find it a little unconfortable in hand due to not so smooth edge cuts:
gearbest.com/cases-leather/pp_631798.html
As you can see in the pictures, the case has is least 1mm larger than the phone in the front side. How is yours regarding this matter? If you could post a picture it would be nice.
Click to expand...
Click to collapse
tackling your questions in order:
1) yes i meant 0.3cm/3mm (it is a big gap i agree but no halo effect)
2) The lip on the front of the case is very small, it wouldn't protect a faceplant on concrete but if you left the phone on your table then it wouldn't make contact with the screen. you are right about the pictures in the listing, the images are wrong and the lip is bigger than that but it isn't going to be very protective.
3) Ill be able to post a picture for you sometime later today. I dont have a spare camera so ill use my friend's phone.

bozy09 said:
tackling your questions in order:
1) yes i meant 0.3cm/3mm (it is a big gap i agree but no halo effect)
2) The lip on the front of the case is very small, it wouldn't protect a faceplant on concrete but if you left the phone on your table then it wouldn't make contact with the screen. you are right about the pictures in the listing, the images are wrong and the lip is bigger than that but it isn't going to be very protective.
3) Ill be able to post a picture for you sometime later today. I dont have a spare camera so ill use my friend's phone.
Click to expand...
Click to collapse
ive attached pictures here

bozy09 said:
ive attached pictures here
Click to expand...
Click to collapse
Thanks for the pictures.
Yap, it looks as the same as the one I have now on my Mi 5s. However, I paid only 0.50 USD in AliExpress
Before this I tried the ASLING brand from Gearbest, but that was very bad: not glass, cheap plastic (you can even see a grid of small dots in the screen), noisy when touching (just as plastic), fingerprint magnet, and completely reflective, I needed to put the brightness on the maximum. And it was pulling out easily. In summary, simply garbage. I removed after some hours of use.
This one similar to yours, looks bad in the edges, but at least is full transparent and has real glass touch.
Now I ordered the Mocolo full cover and also the Cafele with comes with oil to apply. I will post pictures when I received them and after trying them.
Cheers.

silmarx said:
Thanks for the pictures.
Yap, it looks as the same as the one I have now on my Mi 5s. However, I paid only 0.50 USD in AliExpress
Before this I tried the ASLING brand from Gearbest, but that was very bad: not glass, cheap plastic (you can even see a grid of small dots in the screen), noisy when touching (just as plastic), fingerprint magnet, and completely reflective, I needed to put the brightness on the maximum. And it was pulling out easily. In summary, simply garbage. I removed after some hours of use.
This one similar to yours, looks bad in the edges, but at least is full transparent and has real glass touch.
Now I ordered the Mocolo full cover and also the Cafele with comes with oil to apply. I will post pictures when I received them and after trying them.
Cheers.
Click to expand...
Click to collapse
Looking forward to the pictures!

Is there a matte finished screen protector for our device like in this link https://m.aliexpress.com/s/item/32624827571.html?spm=a2g0n.search-cache.0.0.70bc08b9Fx4YsM
Sent from my MI 5s using Tapatalk

abirftw said:
Is there a matte finished screen protector for our device like in this link https://m.aliexpress.com/s/item/32624827571.html?spm=a2g0n.search-cache.0.0.70bc08b9Fx4YsM
Sent from my MI 5s using Tapatalk
Click to expand...
Click to collapse
I've not come across any so I can't say.

bozy09 said:
I've not come across any so I can't say.
Click to expand...
Click to collapse
I've come across some, but they don't look really look like matte finish to me.
Too bad
Sent from my MI 5s using Tapatalk

I've tried Cafele's tempered glass and the oil removes the bubble effect on the side.

ArthStyle said:
I've tried Cafele's tempered glass and the oil removes the bubble effect on the side.
Click to expand...
Click to collapse
I am using it as well and I am surprised how good the oil works to fill out the edge gaps. I am also a little worried whether or not it'll damage my screen in someway. :/
Sent from my MI 5s using Tapatalk

I tried al few screen protectors, but they were all crap. They did'nt stick on the edge of the Display.
My last try was this one and i realy can recommend it:
https://www.amazon.de/gp/aw/d/B01N3RHZDC/ref=ya_st_dp_summary?tag=93ref-21
It's a so called full-cover. It fits absolutly perfect to the display and its nearly invisible. There is no ugly edge where the cover does'nt stick on the Display.
The fingerprint sensor is still working without problems.
btw.....I use it in combination with this silicone-case:
https://www.amazon.de/gp/aw/d/B01M2DNTD2/ref=yo_ii_img?ie=UTF8&psc=1&tag=93ref-21
In combination with a silicone-case you can't see that there is a screen protector on it.
It looks simply great in my opinion.
The only negative thing is, that the screen protector is more sensitive for greasy fingerprints than the original display. But hey.....that's no big problem.
Yes, I know. Its not the cheapest solution. Maybe you can find similar parts on aliexpress, but no guarantee that it will be in the same quality.

Good Tempered glass screen protector that even I could Install right first try!

Otao sent me their new screen protector for the Note 8, and I have to say, this is probably as good as it gets for normal stick on tempered glass protectors on this phone.
The box is pretty standard and comes with all the screen protector installation essentials.
The key to a good installation on any screen protector is making sure that your phone is clean and that you line up the protector perfectly. This is where the installation tray shines... I have installed protectors in the past on phones (feel free to look at old posts) and I can honestly say that this installation tray is the best one I have used... Initially I was worried because when I went to put the glass into it, it was tight. I thought maybe the sizes were off, but no, it was exactly the right size to make sure that there was very little to no wiggle room in there for the protector. This is good obviously because it only lets you put it in one spot, the right one.
Once you have it lined up, you just drop on the glass and make sure the edges are all the way down. (I just used the included microfiber cloth and went over them a few times.) Next you pop off the guide tray and you're done.
If you are using this screen protector without a case you will notice the increase in thickness, but it's not terrible. With a case however it fixes one of my biggest pet peeves.
You have to be careful when putting cases on when you have this screen protector installed because the bezels are so small on the phone that in order for it to actually protect the whole screen it goes pretty much all the way to the end. BUT this is awesome because the cases that I tried (ringke and rhinoshield) didn't knock off or move the screen protector, they came right up to the edge of it and sat almost flush. (I like this because I HATE when pocket lint gets caught between the protector and the case as I am sure many of you do.)
One thing I noticed is that while this protector does have the black bars all the way around it, it looks like they shrunk on the sides a little bit when compared to the Otao protector from the s8+. This makes it sort of a middle ground between the ones that have the clear sides but you can see the glue and the protectors that have black all the way around but cut off some of the screen. It's not perfect but I like how you don't lose much, if any of the screen real estate and you can only see a little bit of the adhesive.
Overall I would say that this screen protector (so far) is pretty legit. I haven't noticed any loss in sensitivity, no rainbowing, no clicking and no covering over any sensors. The dot matrix is visible under certain lighting conditions but that is to be expected.
I only just installed this protector and will update this post if anything goes wrong or changes, but if this is like my S8+ version, i'm sure I won't have any issues.
If you have any questions or anything let me know and i'll try to respond and get them answered.

Gurule92 said:
Otao sent me their new screen protector for the Note 8, and I have to say, this is probably as good as it gets for normal stick on tempered glass protectors on this phone.
The box is pretty standard and comes with all the screen protector installation essentials.
The key to a good installation on any screen protector is making sure that your phone is clean and that you line up the protector perfectly. This is where the installation tray shines... I have installed protectors in the past on phones (feel free to look at old posts) and I can honestly say that this installation tray is the best one I have used... Initially I was worried because when I went to put the glass into it, it was tight. I thought maybe the sizes were off, but no, it was exactly the right size to make sure that there was very little to no wiggle room in there for the protector. This is good obviously because it only lets you put it in one spot, the right one.
Once you have it lined up, you just drop on the glass and make sure the edges are all the way down. (I just used the included microfiber cloth and went over them a few times.) Next you pop off the guide tray and you're done.
If you are using this screen protector without a case you will notice the increase in thickness, but it's not terrible. With a case however it fixes one of my biggest pet peeves.
You have to be careful when putting cases on when you have this screen protector installed because the bezels are so small on the phone that in order for it to actually protect the whole screen it goes pretty much all the way to the end. BUT this is awesome because the cases that I tried (ringke and rhinoshield) didn't knock off or move the screen protector, they came right up to the edge of it and sat almost flush. (I like this because I HATE when pocket lint gets caught between the protector and the case as I am sure many of you do.)
One thing I noticed is that while this protector does have the black bars all the way around it, it looks like they shrunk on the sides a little bit when compared to the Otao protector from the s8+. This makes it sort of a middle ground between the ones that have the clear sides but you can see the glue and the protectors that have black all the way around but cut off some of the screen. It's not perfect but I like how you don't lose much, if any of the screen real estate and you can only see a little bit of the adhesive.
Overall I would say that this screen protector (so far) is pretty legit. I haven't noticed any loss in sensitivity, no rainbowing, no clicking and no covering over any sensors. The dot matrix is visible under certain lighting conditions but that is to be expected.
I only just installed this protector and will update this post if anything goes wrong or changes, but if this is like my S8+ version, i'm sure I won't have any issues.
If you have any questions or anything let me know and i'll try to respond and get them answered.
Click to expand...
Click to collapse
Product link
[Installation Tray] Galaxy Note 8 Screen Protector, OTAO 3D Tempered Glass Screen protector [case friendly] 9H Hardness Tough Sensitivity Samsung screen protector Note 8
https://www.amazon.com/dp/B075XKZX3Y/ref=cm_sw_r_cp_apa_nEZbAbFG3Z0DK
Sent from my SM-N950U1 using Tapatalk

badrsj said:
Product...
Click to expand...
Click to collapse
But you really don't need to quote the whole OP post again...
Sent from my Galaxy Note8 using XDA Labs

Hadn't realized that
Sent from my SM-N950U1 using Tapatalk

Does it work with UAG cases? like the Monarch or the Plasma? those case really kills most TG protectors. even the domeglass. if you didnt put it on perfect, you can say 45 bucks byebye.
thanks.

OutCastedSheep said:
Does it work with UAG cases? like the Monarch or the Plasma? those case really kills most TG protectors. even the domeglass. if you didnt put it on perfect, you can say 45 bucks byebye.
thanks.
Click to expand...
Click to collapse
I made the Whitestone Dome work with the UAG PLASMA AND PLYO. With a Dremel and sanding the corners. The PLASMA is my flavored case for looks and protection.

OutCastedSheep said:
Does it work with UAG cases? like the Monarch or the Plasma? those case really kills most TG protectors. even the domeglass. if you didnt put it on perfect, you can say 45 bucks byebye.
thanks.
Click to expand...
Click to collapse
I don't have any UAG cases but it can't be bigger in the front then rhinoshield can it? I would guess itd work but can't say for sure

OutCastedSheep said:
Does it work with UAG cases? like the Monarch or the Plasma? those case really kills most TG protectors. even the domeglass. if you didnt put it on perfect, you can say 45 bucks byebye.
thanks.
Click to expand...
Click to collapse
If it's the corners you're worried about they come in pretty good. Check out the pic

So is it a full adhesive protector?

Sokudoningyou said:
So is it a full adhesive protector?
Click to expand...
Click to collapse
I don't think it is. I see micro dots in one of the pictures.

Sokudoningyou said:
So is it a full adhesive protector?
Click to expand...
Click to collapse
Nope sadly its not. But its still not bad for what it is

What Sh!ts me off the most is that here in Oz NOTHING can be delivered...
If I want it delivered I have to use a redirect service thaty will add anywhere from $5 to $20 to send it....:crying:

ultramag69 said:
What Sh!ts me off the most is that here in Oz NOTHING can be delivered...
If I want it delivered I have to use a redirect service thaty will add anywhere from $5 to $20 to send it....:crying:
Click to expand...
Click to collapse
That's unfortunate. 5 bucks isn't too bad. But 20. Nahh

says out of stock, how much was it?

OutCastedSheep said:
Does it work with UAG cases? like the Monarch or the Plasma? those case really kills most TG protectors. even the domeglass. if you didnt put it on perfect, you can say 45 bucks byebye.
thanks.
Click to expand...
Click to collapse
This one fits, the one from the OP 100% no, the corner rounding isn't flat enough. If you compare both on the pictures you'll see.
https://www.amazon.de/dp/B075YPSQSY/..._9w3aAb97J1R50
On Amazon.com it is available too.
https://www.amazon.com/gp/aw/d/B075Y...k+note+8&psc=1

pappschlumpf said:
This one fits, the one from the OP 100% no, the corner rounding isn't flat enough. If you compare both on the pictures you'll see.
https://www.amazon.de/dp/B075YPSQSY/..._9w3aAb97J1R50
On Amazon.com it is available too.
https://www.amazon.com/gp/aw/d/B075Y...k+note+8&psc=1
Click to expand...
Click to collapse
Is this full adhesive, or just the edges?

deebo007 said:
Is this full adhesive, or just the edges?
Click to expand...
Click to collapse
Edge only. Forget about full adhesive, except whitestone. I've ordered two classic full adhesive @ AliExpress. A joke Bubbles, not adhering properly on the right and left side. And well the UAG wouldn't have fit with both too. Opened a dispute for both and got my money back.
Gesendet von meinem SM-N950F mit Tapatalk