Hello!
I tried to root my new S2 T810 via the instructions in this youtube video: watch?v=tgrdq66P5Jk
Here's exactly what I did:
Step 1. Downloaded Odin and autoroot kernel file
Step 2. Installed Galaxy Tab S2 driver
Step 3. Extracted the Odin file.
Step 4. Booted Galaxy Tab S2 into download mode
Step 5. Pressed and held the three buttons Power + Home + Volume down together until I saw warning screen. Pressed Volume Up to continue to download mode.
Step 6. Double clicked on extracted file of Odin, Odin3.exe , opened the Odin window
Step 7. Connected your Galaxy Tab S2 to PC now using USB cable. Saw Odin: Added!! message
Step 8. Loaded the autoroot kernel file into Odin.
Step 9. Clicked start button In Odin, it said Pass!! ; red android with pirate eye came up, program ran, device tried to boot and now it's stuck at Samsung logo flashing....
Did I miss something? What can I do to fix this? Tried to factory reset and it did not work. Do I need to flash back to a factory file? If so.. where can I find this?
Samsung has an "Emergency Recovering" program. Google for it. I used it successfully.
Related
Ok, I have rooted samsung tablet 8.9 and made CWM back up. Tablet went into reboot and it having distorts at the boot up power. I pressed Power + volume up for recovery holding 15 secs until you see Package and download.
I pressed volume down at download section and continued to go into odin mode, but nothing has been appear nothing but black screen and then tablet reboots itself and having distorts loop again right after samsung logo. (power on then shows samsung logo goes into distorts then tablet power down and power on repeat same thing)
tried package and it crashed.
Looks like i am unable to have this tablet recovered?
if no fix, I'm returning to best buy store and play dumb for full refund/exchange.
Thanks for your help.
Hi, did you ever get any help for this. I just had the same thing happen (except that I don't know what cwm is) and I haven't gotten a response to my post. It seems that those who install ROM Manager on the 8.9 and enter recovery mode are having this problem - that's what happened to me while I was following instructions on this site. I found the unbrick thread in the andriod development section but the system won't allow me to post there because I'm a noob. There is some terminology I don't understand from the thread, so I need some assistance.
What I'm reading is that I need to find the rom for my device GT 8.9 wifi only (P7310) and flash it to Odin. Where do I find this rom - does it have to be stock? Can it be one of the custom roms from these pages? How do I flash it?
Thanks in advance for the help of some kind soul out there. I'm kind of panicking here. Please help.
Thanks!
If anyone has this problem in the future and has the GT-7310 Samsung Galaxy Tab 8.9 wifi only. This is what I used to unbrick: http://forum.xda-developers.com/showthread.php?t=1406137
More precisely, I downloaded the link at the end of the page, downloaded the link that says: KJ5 for the 7310 (there is also a link for the 7300 version). I only used the sections regarding ODIN3: "FAQ regarding ODIN" and down further in the HOW TO section: [Using ODIN 1.85].
Install Odin via the link downloaded at the bottom of the page.
Download the firmware/rom that is given through the KJ5 link (it takes over an hour to download FYI)
I did not have or use any PIT or CSC files
I booted the tablet into download mode: press power button until Samsung logo appears -> Press the left or upper portion of the rocker button (depending on the orientation you are holding the tablet in) until two icons appear -> press the right/bottom portion of the rocker button to select DOWNLOAD mode -> connect tablet to Windows PC with ODIN3 installed and ON.
In Odin3 select PDA button and look for the firmware you downloaded via the KJ5 link (you will have to unzip the file first using the password: samfirmware.com), click on the .tar file (P7310UEKJ5_P7310XARKJ5_XAR\P7310XARKJ5_P7310UEKJ5_HOME.tar.md5).
With tablet connected to computer and Oden set up as indicated, Oden should detect the tablet and indicate with in yellow in the ID:COM square on the Oden interface. At this point I pushed the start button and let it run until ODEN says "PASS". Then I disconnected and allowed the tablet to auto-reboot. It was a little slower than usual to reboot and I had to manually shut it down and reboot again to get mine to work and the system to fully boot again.
Anyway, I had a lot of trouble sifting through all the terminology and figuring out what was right for the scenario I was experiencing, so I hope this helps some noob out there that was in the same boat I was. Firmware/roms/flashing/etc. I didn't know what any of this was, so someone saying to flash my drive was of no use to me!
Anyway, good luck!
I read some tutorials here in the forum on how to root your phone! I was able to successfully perform. Until that point, my phone was still booting android 2.3.3 (ginger) that came from the factory.
Then I went into recovery mode and installed 5.0.2.6 ClockworkMod! Installed successfully too! Then I tried to install some roms modified for the S5830I, as read on the internet that the roms of them are compatible with the S5830C.
I tried the first version of the ICS lite and basic, the two images, when installed by clockwork gave no error messages in the terminal, but when you restart the machine could not boot the system.
I installed and booted each version of the ICS modificias separately. I tried other roms. gave some errors "gep.prop" because of non-compatibility with my model. In the end, tried to use the method with ODIN, but my phone can not boot the mod download! Yes, I tried all the tutorials!
I know I need to press the home button, power, volume down (...) I tried to use the ADB "adb reboot download", and also got no answer!! So ODIN does not detect my phone! Percebir also that the recovery mode always resets to a version e3 (I think it is the factory default recory) with this recovery can not seem to wipe the cache or data.
Really broke my phone? Why the hell i can get a good status of installation with the roms but can not boot them?
It's a classic
Yes you did break your phone, unless you try this last trick:
take out your battery
wait until your phone is completly uncharged internally (an hour or so)
go to a hot place like a radiator or somthing like that
do the "download mode trick" with the battery still out
put the battery in while still holding the buttons
repeate if it doesnt work
when you get the downloadmode, you are a lucky person. the rest you seem to know how it works... simply flash a new rom
I hope it works!
samsung galaxy ace unbrick clockworkmodace.zip
based on my experience, i unbrick my friends samsung galaxy ace gt-s5830i 2.3.6
or if you install clockwordmodace.zip, it will brick your galaxy ace..
first download odin 1.85
second download PDA zip file from this link
4shared.com/file/Ls2CAsHv/PDA.html?cau2=403tNull[/url]
instructions:
1. run odin,( run as administrator) right click on the exe file and choose run as administrator
2. while you device is off, plug your usb connector to your computer
3. hold volume up + volume down + power at the same time, wait for the battery charging logo appears, then wait for the battery logo disappear then unpress power botton then your phone will go into download mode and will be recognize by odin..
if Odin already recognize your device click on PDA and insert the PDA file you downloaded. then click start. dont change the setting in odin.
after that you successfully bring back life to your brick samsung galaxy ace.
Note: make sure you already installed samsung kies on your computer for USB issues. this will help your device to be recognize by odin.
Hope this will help you guys.. i already tested this procedure.
THANKS¡¡¡¡¡¡¡¡
edward_swit14 said:
based on my experience, i unbrick my friends samsung galaxy ace gt-s5830i 2.3.6
or if you install clockwordmodace.zip, it will brick your galaxy ace..
first download odin 1.85
second download PDA zip file from this link
4shared.com/file/Ls2CAsHv/PDA.html?cau2=403tNull[/url]
instructions:
1. run odin,( run as administrator) right click on the exe file and choose run as administrator
2. while you device is off, plug your usb connector to your computer
3. hold volume up + volume down + power at the same time, wait for the battery charging logo appears, then wait for the battery logo disappear then unpress power botton then your phone will go into download mode and will be recognize by odin..
if Odin already recognize your device click on PDA and insert the PDA file you downloaded. then click start. dont change the setting in odin.
after that you successfully bring back life to your brick samsung galaxy ace.
Note: make sure you already installed samsung kies on your computer for USB issues. this will help your device to be recognize by odin.
Hope this will help you guys.. i already tested this procedure.
Click to expand...
Click to collapse
MAN-...... YOURE FREAKING AWESOME..... (sorry for screaming) but your metod was the only one that worked for me....
seriouslly thanks a lot... (sorry for mi BAD english) i can´t thank you enough......
you´re awesome
phone not flashin!
edward_swit14 said:
based on my experience, i unbrick my friends samsung galaxy ace gt-s5830i 2.3.6
or if you install clockwordmodace.zip, it will brick your galaxy ace..
first download odin 1.85
second download PDA zip file from this link
4shared.com/file/Ls2CAsHv/PDA.html?cau2=403tNull[/url]
instructions:
1. run odin,( run as administrator) right click on the exe file and choose run as administrator
2. while you device is off, plug your usb connector to your computer
3. hold volume up + volume down + power at the same time, wait for the battery charging logo appears, then wait for the battery logo disappear then unpress power botton then your phone will go into download mode and will be recognize by odin..
if Odin already recognize your device click on PDA and insert the PDA file you downloaded. then click start. dont change the setting in odin.
after that you successfully bring back life to your brick samsung galaxy ace.
Note: make sure you already installed samsung kies on your computer for USB issues. this will help your device to be recognize by odin.
Hope this will help you guys.. i already tested this procedure.
Click to expand...
Click to collapse
REPLY:- the phone does get detected but once i open odin 4.38 n inser the ops n pacage file n den click start it says cant open serial com port.. wats tht suppose to mean?
ACE_95 said:
REPLY:- the phone does get detected but once i open odin 4.38 n inser the ops n pacage file n den click start it says cant open serial com port.. wats tht suppose to mean?[/Q
i'm trying to flash my galaxy ace gt s 5830....but i'm not able to get the mobile in download mode...
when i'm tryimg to get it in download mode by pressing vol down =+menu+power keys it getting black screen and displying wors like thik ' Downloading........'
can anyone help me plzzzzz
Click to expand...
Click to collapse
...can access download mode.
So,
I downloaded cyanogenmod 11, but I kept getting com.android.systemui has stopped EVERY 2-3 seconds. I couldn't do anything.
So, I downloaded stock rom, but phone won't boot (samsung logo, mini 2 logo, vibrating at samsung animation and repeat) and I couldn't access recovery mode.
I tried other roms and Recovery PDA
... well, stuck on fat.bin.
After that, it got...weirder. When trying to boot, I got samsung logo, mini 2 logo...but no animation. Instead, just vibrating. No loop. Just vibrating.
I'm aware I lost this mobile, but I can't buy new right now
so much replies here...so many ways to fix...thank you so much... :silly:
The same problem
JohnS_CZ said:
...can access download mode.
So,
I downloaded cyanogenmod 11, but I kept getting com.android.systemui has stopped EVERY 2-3 seconds. I couldn't do anything.
So, I downloaded stock rom, but phone won't boot (samsung logo, mini 2 logo, vibrating at samsung animation and repeat) and I couldn't access recovery mode.
I tried other roms and Recovery PDA
... well, stuck on fat.bin.
After that, it got...weirder. When trying to boot, I got samsung logo, mini 2 logo...but no animation. Instead, just vibrating. No loop. Just vibrating.
I'm aware I lost this mobile, but I can't buy new right now
Click to expand...
Click to collapse
I am hopeless in this issue to but....
I think that the last chance for us is a ROM which we can flash directly through odin.
It could work but I could not find any. Could any one have a rom to flash through odin?
install samsung driver and flash with odin3
you should flash your phone this is the
instructions
download odin3 https://www.copy.com/s/
qmTqyZFweDIj/Odin3_v3.09.zip
samsung driver for s6500
downloadcenter.samsung.com/content/
SW/201401/20140121132354500/
SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.33.0.exe
frimware for s6500
fileparadox.com/0bi6jri969ai/
S6500DBGMK1_S6500DXECML1_XEC_.zip
install samsung drivers and
Download firmware from the above list
and extract the zip file, you should get
.tar.md5 file along with few other files.
2. Download Odin v3.09 and extract the zip
file, you should get Odin v3.09.exe file
along with other files.
3. Now Open/Run Odin v3.09.exe file as an
administrator (to open program with
admin privilege, right click on the Odin
v3.09.exe file and click on the “Run as
administrator” from the context menu, this
is applicable only on Windows Vista,
Windows 7 or higher PC)
4. Switch off and boot Galaxy Mini 2 S6500
into Download Mode by pressing and
holding the Volume Down+Home+Power
buttons together (long press until the
boot screen appear). A warning message
will flash, now press Volume Up key to
proceed to Download Mode .
5. Now connect your Galaxy Mini 2 S6500 to
your PC via USB cable
6. In Odin screen, you should see a COM
Port number like “0:[COM7]” at ID:COM
section and “Added!” text at the message
box. This means your device has been
successfully detected by Odin. (If not, then
try connecting through another USB port.
If you are using desktop PC, use USB port
located at the back of the CPU. If still
don’t work, then you should reinstall the
USB driver and try again)
7. Make sure that, only the “Auto Reboot”
and “F. Reset Time” options are checked
in Odin screen.
8. Now, click on the AP button and select
the .tar.md5 file that you get by
extracting the firmware zip file in step 1.
9. Now, click on the Start button to begin
the installation process, and wait few
moments.
10. Once completed, you would see “PASS!”
message in ID:COM port having green
background
11. Your phone should automatically reboot
after completion
12. You can now disconnect/unplug your
phone from computer
I have a SM-N910T and running on Android 6.0.1. I followed these guide below.
Guides:
http://www.androidexplained.com/galaxy-note-4-root/
https://www.youtube.com/watch?v=O4OfjIhbCp0
My Steps:
1. Unlock Developer mode and enable USB debugging.
2. Went to Security> Disable Reactivation lock.
3. Went to the link below and download Samsung Galaxy Note 4 (all variants) for the Samsung USB Driver.
-https://androidmtk.com/download-samsung-usb-drivers
-(Direct) http://samsungusbdriver.com/download/samsung-driver-v1-5-61-0
4. Install the USB Driver.
5. Download Odin 3.11.1 from the link below.
-http://odindownload.com/download/
6. Download CF-Auto-Root-trltetmo-trltetmo-smn910t.zip
-https://autoroot.chainfire.eu/
7. Press the Volume Up Button to Continue Past the Warning Message
8. Odin > run as admin > AP > load the CF-Auto-Root...
9. Odin say Pass! but the red Android icon never show up. I'm stuck at the Samsung Galaxy Note 4 splashscreen.
10. My phone no longer can boot. I then had to restore it to the original img and my phone is now back to normal.
Can someone please let me know what I did wrong?
gogent said:
I have a SM-N910T and running on Android 6.0.1. I followed these guide below.
Guides:
http://www.androidexplained.com/galaxy-note-4-root/
My Steps:
1. Unlock Developer mode and enable USB debugging.
2. Went to Security> Disable Reactivation lock.
3. Went to the link below and download Samsung Galaxy Note 4 (all variants) for the Samsung USB Driver.
-https://androidmtk.com/download-samsung-usb-drivers
-(Direct) http://samsungusbdriver.com/download/samsung-driver-v1-5-61-0
4. Install the USB Driver.
5. Download Odin 3.11.1 from the link below.
-http://odindownload.com/download/
6. Download CF-Auto-Root-trltetmo-trltetmo-smn910t.zip
-https://autoroot.chainfire.eu/
7. Press the Volume Up Button to Continue Past the Warning Message
8. Odin > run as admin > AP > load the CF-Auto-Root...
9. Odin say Pass! but the red Android icon never show up. I'm stuck at the Samsung Galaxy Note 4 splashscreen.
10. My phone no longer can boot. I then had to restore it to the original img and my phone is now back to normal.
Can someone please let me know what I did wrong?
Click to expand...
Click to collapse
Try just installing TWRP. Good volume up and home right when it reboots to make sure it doesn't get rejected by the stock recovery and then install su through there. sure you have t and not t3?
Thanks gunz.jones! I was able to root my phone.
gogent said:
I have a SM-N910T and running on Android 6.0.1. I followed these guide below.
Guides:
http://www.androidexplained.com/galaxy-note-4-root/
https://www.youtube.com/watch?v=O4OfjIhbCp0
My Steps:
1. Unlock Developer mode and enable USB debugging.
2. Went to Security> Disable Reactivation lock.
3. Went to the link below and download Samsung Galaxy Note 4 (all variants) for the Samsung USB Driver.
-https://androidmtk.com/download-samsung-usb-drivers
-(Direct) http://samsungusbdriver.com/download/samsung-driver-v1-5-61-0
4. Install the USB Driver.
5. Download Odin 3.11.1 from the link below.
-http://odindownload.com/download/
6. Download CF-Auto-Root-trltetmo-trltetmo-smn910t.zip
-https://autoroot.chainfire.eu/
7. Press the Volume Up Button to Continue Past the Warning Message
8. Odin > run as admin > AP > load the CF-Auto-Root...
9. Odin say Pass! but the red Android icon never show up. I'm stuck at the Samsung Galaxy Note 4 splashscreen.
10. My phone no longer can boot. I then had to restore it to the original img and my phone is now back to normal.
Can someone please let me know what I did wrong?
Click to expand...
Click to collapse
Unchecked auto reboot on the option's tab of Odin and after you flash, take out battery put back in and when you power on hold up, home, and power then flash super super
Stock recovery for Samsung Galaxy Grand Neo (GT-I9060).
Today we are going to install Stock recovery.This method will work on any samsung device. If you are new to Flashing then this tutorial is for you.
Note: Recovery file in this guide only works on GT-I9060. Do not try to use it on any other device.
Files we required
1. Stock recovery (.tar.md5)
2. Odin 3.10.7 (you can also use any old version too).
3. Samsung USB drivers.
Links for downloading
1. Stock Recovery (.tar.md5) --> Download
2. Odin 3.10.7 --> Download
3. Samsung USB drivers --> Download
Let's Start and follow steps
If you know how to use odin you can go straight to step 5.
Preparing Computer
Step 1 :- Extract Samsung USB drivers to any folder in your pc and install it.
Step 2 :- Now reboot your computer.
Step 3 :- Extract Odin 3.10.7 to any folder in your pc and open extracted folder.
Step 4 :- Right click on file named odin3 v3.10.7 and click on "Run as administrator" then hit yes.
Step 5 :- Now click on button called "AP".
Step 6 :- Navigate to the directory where you have downloaded the "recovery.tar.md5" and double click on that.
Step 7 :- Goto the "Option" in odin and uncheck "Auto reboot".
Preparing Device
Step 8 :- Switch off your device and enter into Download mode by pressing and holding Volume down + Home + Power keys simultaneously and leave keys only when you feel vibration.
Step 9 :- Press Volume up key to continue.
Step 10 :- Now connect your device to computer using USB cable.
Step 11 :- And hit start button in odin to start flashing (Wait till it flashes).
Step 12 :- When you see "Reset" in left top box remove your battery and boot in recovery by pressing Volume up + Home + Power key simultaneously and leave keys only when you feel vibration.
Thats it now you have successfully booted in stock recovery.
If you face any problem just ask me
If This post helped you hit THANKS
Hi, will this work with GT 9060I/ds Grand neo plus (2sim)? Thanks.
Wakizashis said:
Hi, will this work with GT 9060I/ds Grand neo plus (2sim)? Thanks.
Click to expand...
Click to collapse
No it only works with GT-I9060.
Dude you're the king I spent nearly an hour trying to restore mine jesus christ I don't know what I would've done without you thank you!
I would press the button but I can't find a thank button...
Hi, I HAVE GT 9060I/ds Grand neo plus i tryed to root it but it didn't work and my phone now is stuck with black screen written on it (samsung galaxy grand .... ) and in the top left a small indication with a red color ( ! ) its an exclamation point ...... what can i do to fix this .. !!????? plz help . and thank you .
Hello
I deleted my default launcher with root access
Will it restore it if i follow your method?
loliconer said:
Hello
I deleted my default launcher with root access
Will it restore it if i follow your method?
Click to expand...
Click to collapse
XD
I have a problem in Step 12, there's a android logo with 7s ONKEY PRESS when i am turning to recovery mode.. Any help will do..thanks in advance..
andro_Guy said:
I have a problem in Step 12, there's a android logo with 7s ONKEY PRESS when i am turning to recovery mode.. Any help will do..thanks in advance..
Click to expand...
Click to collapse
hi, i have problem with booting samsung gt-i9060 after firmware update.. so it shows me download mode and recovery, but when swithed phone normally on, it shows SAMSUNG GRAND NEO, and then is black screen, plays sound and as i understand it boots in normal menu, but without image. touchscreen works well. what is wrong?
made_in_androland said:
No it only works with GT-I9060.
Click to expand...
Click to collapse
My GT-I9060 encountered the same problem, i have tried odin with all the steps you have mentioned wont work. after pass it attempts to boot and stuck at the same recovery mode in kies & try again. please help
made_in_androland said:
Stock recovery for Samsung Galaxy Grand Neo (GT-I9060).
Today we are going to install Stock recovery.This method will work on any samsung device. If you are new to Flashing then this tutorial is for you.
Note: Recovery file in this guide only works on GT-I9060. Do not try to use it on any other device.
Files we required
1. Stock recovery (.tar.md5)
2. Odin 3.10.7 (you can also use any old version too).
3. Samsung USB drivers.
Links for downloading
1. Stock Recovery (.tar.md5) --> Download
2. Odin 3.10.7 --> Download
3. Samsung USB drivers --> Download
Let's Start and follow steps
If you know how to use odin you can go straight to step 5.
Preparing Computer
Step 1 :- Extract Samsung USB drivers to any folder in your pc and install it.
Step 2 :- Now reboot your computer.
Step 3 :- Extract Odin 3.10.7 to any folder in your pc and open extracted folder.
Step 4 :- Right click on file named odin3 v3.10.7 and click on "Run as administrator" then hit yes.
Step 5 :- Now click on button called "AP".
Step 6 :- Navigate to the directory where you have downloaded the "recovery.tar.md5" and double click on that.
Step 7 :- Goto the "Option" in odin and uncheck "Auto reboot".
Preparing Device
Step 8 :- Switch off your device and enter into Download mode by pressing and holding Volume down + Home + Power keys simultaneously and leave keys only when you feel vibration.
Step 9 :- Press Volume up key to continue.
Step 10 :- Now connect your device to computer using USB cable.
Step 11 :- And hit start button in odin to start flashing (Wait till it flashes).
Step 12 :- When you see "Reset" in left top box remove your battery and boot in recovery by pressing Volume up + Home + Power key simultaneously and leave keys only when you feel vibration.
Thats it now you have successfully booted in stock recovery.
If you face any problem just ask me
If This post helped you hit THANKS
Click to expand...
Click to collapse
My GT-I9060 encountered the same problem, i have tried odin with all the steps you have mentioned wont work. after pass it attempts to boot and stuck at the same recovery mode in kies & try again. please help