Here we have root for stock rom Thanks to the Chainfire Team.
Everything done by them so all thanks and credits are for them
Download
https://download.chainfire.eu/1036/CF-Root/CF-Auto-Root/CF-Auto-Root-on7xelte-on7xeltedd-smg610f.zip
Installation
-Enable USB debugging and OEM unlocking in the settings
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue
-Flash the CF-Auto-Root package as AP in ODIN(Comes within the zip file), and your device should reboot into a modified recovery (signified by a large red Android logo) and it will install SuperSU for you and restore the stock recovery, and reboot back into Android.
I tested it on my device and it worked normally
I will not be responsible for any damage to your device, but following the steps will normally work normally
I just tested with ROM stock 6.0.1 with security patch from 1 July 2017
.
Hayleyw2 said:
Here we have root for stock rom Thanks to the Chainfire Team.
Everything done by them so all thanks and credits are for them
Download
https://download.chainfire.eu/1036/CF-Root/CF-Auto-Root/CF-Auto-Root-on7xelte-on7xeltedd-smg610f.zip
Installation
-Enable USB debugging and OEM unlocking in the settings
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue
-Flash the CF-Auto-Root package as AP in ODIN(Comes within the zip file), and your device should reboot into a modified recovery (signified by a large red Android logo) and it will install SuperSU for you and restore the stock recovery, and reboot back into Android.
I tested it on my device and it worked normally
I will not be responsible for any damage to your device, but following the steps will normally work normally
I just tested with ROM stock 6.0.1 with security patch from 1 July 2017
.
Click to expand...
Click to collapse
Hi will it work for version 7.0 also
it's working fine for me
i have "G610FDDU1BRF2" with android version 7.0 and it gets installed successfully
thanks
How to change Supersu with Magisk?
Razortm said:
it's working fine for me
i have "G610FDDU1BRF2" with android version 7.0 and it gets installed successfully
thanks
Click to expand...
Click to collapse
How to restore stock recovery
Ryan.XM said:
How to restore stock recovery
Click to expand...
Click to collapse
Flash the cf auto root and it will automatically change your recovery into stock.
bjpp21 said:
Flash the cf auto root and it will automatically change your recovery into stock.
Click to expand...
Click to collapse
Ok thanks
I have J7 prime [SM-G610F] with stock andriod 8.1, samsung experience 9.5 and 1 November 2018 security patch will it still work?
I don't think so. I think the J7 with 8.1 is impossible to root? I can't seem to find an answer on this.
lordbaal19 said:
i don't think so. I think the j7 with 8.1 is impossible to root? I can't seem to find an answer on this.
Click to expand...
Click to collapse
its not impossible to root j7 on oreo..just search here in xda and you will find the impossible is really possible.
Well the TWRP thread has no real answers and this method doesn't work either.
I have done it
LordBaal19 said:
Well the TWRP thread has no real answers and this method doesn't work either.
Click to expand...
Click to collapse
yes, I have made root in my SM-G610m with Android 8.1 and it was with TWRP, and I have learned it from YouTube and in Spanish language.
For now I do not have available Super User. I think this post will work for me
ernestoi said:
yes, I have made root in my SM-G610m with Android 8.1 and it was with TWRP, and I have learned it from YouTube and in Spanish language.
For now I do not have available Super User. I think this post will work for me
Click to expand...
Click to collapse
Found a way:
LordBaal19 said:
Which one do you recommend? At which point do I have to install it and then I don't need to install no-verity-opt-encrypt-6.0?
EDIT: I think I finally got it. I did it like this:
1. Ok, so the phone as a fresh 8.1.0 system (just flashed the 7.0 and then it updated OTA in a matter of minutes). I enter the phone, enable the developer mode, enable OEM Unlocking and USB Debug.
2. Then I put the phone on download mode, flash the TWRP recovery disabling the auto-reboot on Odin so it doesn't boot to system automatically. This seem important since otherwise the recovery goes back to stock.
3. Then, to get out of download mode I press vol. down and power keys at the same time and the phone turn off. Then I turn on the phone into recovery mode, once in there I swipe into write mode and go to Wipe and select Format Data, type down yes and it says it's done. I go back to TWRP main menu.
4. I connect the cellphone to the PC and in storage I select Mount USB. Then drag the Magisk-v18.0.zip file into the storage that pops up on Windows. Then I saftely remove the device in Windows and go back to the main TWRP menu on the phone. I select Install and install the .zip file without selecting Signature verification or Reboot after is complete. It says is done installing and no errors seems to occur. I employ the button to wipe Cache and Dalvik.
5. I go back again o Wipe and select Format Data, type down yes and it says it's done, again.
5. Then I try to reboot to System, and choose to Do Not Install the TWRP app, and... SUCCESS!! The phone starts again, I config everything and then Magisk is there in the apps. I tried with an app that requires SU and it works!
Thanks for the help.
Click to expand...
Click to collapse
For the files and details check the OP on that thread.
LordBaal19 said:
Found a way:
For the files and details check the OP on that thread.
Click to expand...
Click to collapse
That's the way I have done it. But if you go on Z3X, select the device (SM-G610M), and you perform some activity like repair IMEI, Z3X detects the root, but it does not detect the Super User.
Related
This is an unofficial TWRP port for LG-H960A.
Thanks to @KAsp3rd and @GROGG88
I DON'T TAKE ANY RESPONSIBILITY. YOU DO EVERYTHING AT YOUR OWN RISK.
READ EVERYTHING and MAKE A BACKUP BEFORE YOU START.
Instructions:
1. You must be on newest stock Marshmallow: H960A20a_00_0316.kdz
You can use LG Bridge to install official update, or download .kdz file HERE
2. You need to have bootloader ulocked.
Official instructions are here: ( Unlocking the Bootloader @ LG Developer )
Remember that this will completely WIPE YOUR DATA, you will LOSE WARRANTY and this operation is IRREVERSIBLE.
3. Flash TWRP.
I assume you got ADB and FASTBOOT drivers working and adb is paired (it should be if you completed step 2).
Connect your phone to your pc, open command prompt and reboot to bootloader:
Code:
adb reboot bootloader
Your phone should reboot and you should be welcomed by Fastboot Mode screen.
Now download the recovery file (below) to your pc, unpack (to get .img) and rename it to recovery.img and put it in folder where you got command prompt open and:
Code:
fastboot flash recovery recovery.img
4. Boot to TWRP.
As on Marshmallow some fastboot commands are not working and LG is restoring recovery on every boot (so you cant use "adb reboot recovery" right now) you need to use one trick.
DO NOT REBOOT YOUR PHONE.
When still in fastboot from step 3 you need to turn off your phone completely. You can do that by holding power button or if that is not working take the battery out.
Now (put the battery in) and press POWER + VOL DOWN buttons. When you see LG logo release the POWER button (while still holding VOL DOWN) and press POWER button again.
You should see a screen which is asking you if you want to factory reset your phone. Don't worry - if you made everything correctly it should not wipe your phone.
Use volume and power buttons to choose YES (twice) - and you should see a TWRP screen (after a while)
WARNING: IF YOU REBOOTED YOUR PHONE AFTER FLASHING RECOVERY THIS STEP WILL REALLY ERASE ALL DATA. You need to flash recovery again (step 3)
5. (optional) flash SuperSU to get root.
Get SuperSU from official thread and put it in your phone.
While in TWRP from step 4 your phone should be recognized by ADB. Use below to move file to sdcard.
Code:
adb push BETA-SuperSU-v2.74-2-20160519174328.zip /sdcard/supersu.zip
Now in TWRP click Install, go to /sdcard/ and chooose supersu.zip. Follow instructions. After install you should choose to wipe cache/dalvik and reboot to system.
Your phone should be rooted now.
Download:
twrp-3.0.2.0-0-h960a.img.zip
(unpack .zip to get flashable .img)
Issues:
- Layout is wrong, status bar is being drawn on second screen.
- Date/time is wrong.
broken url
OK, now if we have recovery, is it possible to dump rooted system and pack it to .tot file for people who don't want to lose warranty?
11868 said:
broken url
Click to expand...
Click to collapse
Oh, true. Fixed.
rascal0pl said:
OK, now if we have recovery, is it possible to dump rooted system and pack it to .tot file for people who don't want to lose warranty?
Click to expand...
Click to collapse
Maybe.
Thank You it worked!
Great. Just bought it 2 days ago for good price. Will try it.
Sent from my LG-H955 using Tapatalk
Hi,
that's just great, thanks a lot.
As root is now possible has anyone tried to install xposed on th H960A?
I'm wondering if the second screen fix for the Telekom V10 also works with the H960A.
What about Viper4Android and AdAway?
rudi666 said:
This is an unofficial TWRP port for LG-H960A.
Thanks to @KAsp3rd and @GROGG88
I DON'T TAKE ANY RESPONSIBILITY. YOU DO EVERYTHING AT YOUR OWN RISK.
READ EVERYTHING and MAKE A BACKUP BEFORE YOU START.
Instructions:
1. You must be on newest stock Marshmallow: H960A20a_00_0316.kdz
You can use LG Bridge to install official update, or download .kdz file HERE
2. You need to have bootloader ulocked.
Official instructions are here: ( Unlocking the Bootloader @ LG Developer )
Remember that this will completely WIPE YOUR DATA, you will LOSE WARRANTY and this operation is IRREVERSIBLE.
3. Flash TWRP.
I assume you got ADB and FASTBOOT drivers working and adb is paired (it should be if you completed step 2).
Connect your phone to your pc, open command prompt and reboot to bootloader:
Code:
adb reboot bootloader
Your phone should reboot and you should be welcomed by Fastboot Mode screen.
Now download the recovery file (below) to your pc, unpack (to get .img) and rename it to recovery.img and put it in folder where you got command prompt open and:
Code:
fastboot flash recovery recovery.img
4. Boot to TWRP.
As on Marshmallow some fastboot commands are not working and LG is restoring recovery on every boot (so you cant use "adb reboot recovery" right now) you need to use one trick.
DO NOT REBOOT YOUR PHONE.
When still in fastboot from step 3 you need to turn off your phone completely. You can do that by holding power button or if that is not working take the battery out.
Now (put the battery in) and press POWER + VOL DOWN buttons. When you see LG logo release the POWER button (while still holding VOL DOWN) and press POWER button again.
You should see a screen which is asking you if you want to factory reset your phone. Don't worry - if you made everything correctly it should not wipe your phone.
Use volume and power buttons to choose YES (twice) - and you should see a TWRP screen (after a while)
WARNING: IF YOU REBOOTED YOUR PHONE AFTER FLASHING RECOVERY THIS STEP WILL REALLY ERASE ALL DATA. You need to flash recovery again (step 3)
5. (optional) flash SuperSU to get root.
Get SuperSU from official thread and put it in your phone.
While in TWRP from step 4 your phone should be recognized by ADB. Use below to move file to sdcard.
Code:
adb push BETA-SuperSU-v2.74-2-20160519174328.zip /sdcard/supersu.zip
Now in TWRP click Install, go to /sdcard/ and chooose supersu.zip. Follow instructions. After install you should choose to wipe cache/dalvik and reboot to system.
Your phone should be rooted now.
Download:
twrp-3.0.2.0-0-h960a.img.zip
(unpack .zip to get flashable .img)
Issues:
- Layout is wrong, status bar is being drawn on second screen.
- Date/time is wrong.
Click to expand...
Click to collapse
Are there any other known issues? I don`t need to install any custom roms. I need it only for root and xposed on Marshmallow. Is there something that can surprise me?
Hi,
"OK, now if we have recovery, is it possible to dump rooted system and pack it to .tot file for people who don't want to lose warranty? "
Ohh, thats sounds nice if this realy possible.
i love my v10.
orbitandre said:
hi,
"ok, now if we have recovery, is it possible to dump rooted system and pack it to .tot file for people who don't want to lose warranty? "
ohh, thats sounds nice if this realy possible.
i love my v10.
Click to expand...
Click to collapse
+1 ??
cyvr1 said:
As root is now possible has anyone tried to install xposed on th H960A?
I'm wondering if the second screen fix for the Telekom V10 also works with the H960A.
What about Viper4Android and AdAway?
Click to expand...
Click to collapse
Didn't try xposed but I think it should work (if it's working on other V10 models - they are not that different). I just recently bought V10 and was disappointed in dpi, so I needed root to patch second screen to be dpi-independent.
Also: why would you want things like Viper4Android when you got really good sounding hifi dac onboard?
fixxxer102 said:
Are there any other known issues? I don`t need to install any custom roms. I need it only for root and xposed on Marshmallow. Is there something that can surprise me?
Click to expand...
Click to collapse
For sure it's enough to flash packages and get root. Xposed is independent from recovery so I can't say anything about that.
Testing are up to you guys. Don't be afraid as this phone is not easy to brick.
rudi666 said:
Also: why would you want things like Viper4Android when you got really good sounding hifi dac on board?
Click to expand...
Click to collapse
Quite simple answer. The onboard Hifi DAC only works with cable headphones. Viper4Android also supports Bluetooth devices.
rudi666 said:
I just recently bought V10 and was disappointed in dpi, so I needed root to patch second screen to be dpi-independent.
Click to expand...
Click to collapse
Could you write a small guide about the dpi change (I prefer 540-580)?
Thanks in advance.
cyvr1 said:
Quite simple answer. The onboard Hifi DAC only works with cable headphones. Viper4Android also supports Bluetooth devices.
Click to expand...
Click to collapse
Ah, you are right, that makes perfect sense. Sorry, I forgot about that.
paschalism said:
Could you write a small guide about the dpi change (I prefer 540-580)?
Click to expand...
Click to collapse
There is still a long way, right now second screen FCs are fixed, but layouts are still wrong. I don't know if I can fix it to be truly dpi-independent but I think 560 is optimal value for this screen.
Is this working with
H960a
V20a-AME-xx??
1k views and only 11 "thanks"??? Really? Guys! We need support devs! Big THANK YOU for ur hard work @rudi666. I haven't try ur method yet but I am happy with the fact that something is beginning to happen with v10
Wysłane z mojego LG-H960 przy użyciu Tapatalka
asmoroth said:
I haven't try ur method yet but I am happy with the fact that something is beginning to happen with v10
Click to expand...
Click to collapse
I did try his method and it worked like a charm. Ok, you'll have to reflash TWRP if you want to use it but I'm sure it's just a matter of time until we have permanent TWRP like th T-Mobile V10 obviously has.
Thanks to rudi666 I have root, xposed, adaway and viper4audio up and running on my V10. And as there are no interesting custom roms to flash in my opinion it does not matter that I'd need to reflash TWRP. If you plan your flashing in advance you can flash all zip files in one go. No real need for TWRP afterwards.
Thanks guys. Unfortunately I see there is not much going on in V10 scene, and it's a shame.
cyvr1 said:
Ok, you'll have to reflash TWRP if you want to use it but I'm sure it's just a matter of time until we have permanent TWRP like th T-Mobile V10 obviously has.
Click to expand...
Click to collapse
Hm.. if you follow instructions you should get permanent TWRP, just try "adb reboot recovery" to test it if you don't want to risk clearing data when using button combination. There is a file called /system/boot-from-recovery.p which is 'restoring recovery' on every boot (that's why there is an info in instruction about not rebooting your phone the first time), but after all the steps this file will be patched. I don't remember if the first use of TWRP or flashing SuperSU does it, but you should get permanent recovery. If not you can always rename this file manually.
rudi666 said:
Hm.. if you follow instructions you should get permanent TWRP, just try "adb reboot recovery" to test it if you don't want to risk clearing data when using button combination. There is a file called /system/boot-from-recovery.p which is 'restoring recovery' on every boot (that's why there is an info in instruction about not rebooting your phone the first time), but after all the steps this file will be patched. I don't remember if the first use of TWRP or flashing SuperSU does it, but you should get permanent recovery. If not you can always rename this file manually.
Click to expand...
Click to collapse
Hi,
I will try that again and see if I can get permanent TWRP. But as I said currently there is no real requirement for that. I flashed SuperSU and both files for xposed when I first booted into recovery and that is all I need at the moment.
i cant enter bootloader
h960A
after adb reboot booloader it keeb restart to soft
This Guide Can Also Be Used For Unlocking & Relocking Bootloader, Installing TWRP & Rooting
If Any Ota Messes With The Implementation Then Whole Procedure Needs To Be Redone
To mitigate the problem requesting developers for making a hack for Relocking Bootloader Without Wiping Data PM me if Interested
Data Will Be Wiped So Make Backup First
What Will We Be Doing: Unlocking Bootloader, Installing TWRP,Flashing Camera2api Enabler, Installing Back Stock Recovery, Relocking Bootloader
Procedure:
1. Download this rar and you'll get 2 folders namely unlock and ASUS_Android_USB_drivers_for_Windows
2. Install the drivers according to your OS (happens Automatically In Most Cases) and open the unlock folder
3. Reboot your phone to fastboot mode by pressing volume up + power on at the same time.
4. Connect it to pc and open unlock.bat in unlock folder
5. Long Press Power Button & Reboot. A wiping Data screen will appear followed by an encrypting sceen then the phone will reboot (A warning of unlocked bootloader will show up initially)& then the initial setup screen will show up don't add any thing & skip the setup(there will be another wipe).
6. Download Cam2Api & copy it to sd card or internal storage of phone. Then switch off the phone once again & reboot in fastboot mode once more.
7. Download TWRP from here & Install Minimal ADB to root of C drive.
8. Copy the twrp to the adb folder in your C drive.
9. Open the 'cmd-here.exe' the adb window will open
10. With the phone connected in fastboot mode type in adb "fastboot flash recovery twrpasus.img" & press enter then type "fastboot boot twrpasus.img" & hit enter.
11. Switch Off the phone & boot in twrp by pressing vol down+power, opening TWRP will take time
12. A decryption popup will open in twrp skip it.
13. Select Install Zip & slect the storage where you have kept the cam2api.zip & flash it, then select reboot system.
14. Download Gcam from here (Arnova v8 is best) & copy it to phone and install it, check if it works, dont configure it. Reboot your phone to fastboot mode
15. Download stock asus recovery from here & copy it to the adb folder.
16. Again open the adb & type "fastboot flash recovery recovery.img"
17. Download Zenfone_Max_M1_Pro_Relock.zip and extract it.
18. Open the directory where you extracted the file
19. In that directory, open a file named relock_bl.cmd
20. A Command (CMD) prompt will do the rest of the work for you.
Let the phone restart.
21. It will then erase all the data on your phone once again (excluding Micro SD card).
23. Reboot
22. Now the phone won’t show the “bootloader unlocked” warning that was displayed after you unlocked the bootloader. Now setup the phone and install the Gcam downloaded earlier also all manual camera apps will work fine too.
Done! You Have Successfully Relocked Bootloader & Enabled Camera 2 api in stock rom. As the bootloader is locked & we have'nt rotted our phone you have your warranty and ota updates work well. If any kind of future ota breaks the camera2api then you have to redo the procedure once again.
Installing Magisk Or SuperSU while twrp is installed will root your phone (breaks ota updates though)
Credits to:
@Sudeep Duhoon : For Original Unofficial unlock & Camera2api Enabler script
@Shivam Kumar Jha For Unofficial TWRP
@style2345 For Providing ASUS Stock Recovery
@myapky For Relocking Script
Hit Thanks If This Helped You!
Ok, I have got stuck. Have a windows 10 machine so was unable to apply the drivers since they were automatically installed. When I tried to install manually, I got an error message that driver is not compatible. Rest of the steps when fine till Step 10. But thereafter TWRP was not installed and the phone went into default recovery with options and th botton of the screen showing an error showing E: couldn't load bitmap fill_ball (error -7). What could have happened?
mehtasu said:
Ok, I have got stuck. Have a windows 10 machine so was unable to apply the drivers since they were automatically installed. When I tried to install manually, I got an error message that driver is not compatible. Rest of the steps when fine till Step 10. But thereafter TWRP was not installed and the phone went into default recovery with options and th botton of the screen showing an error showing E: couldn't load bitmap fill_ball (error -7). What could have happened?
Click to expand...
Click to collapse
You need to uninstall the drivers & redo the process most times we dont need to manually install the drivers. We install drivers only if flashing doesnt occur(you did the opposite) after installing twrp make sure to clear data(factory reset through it)
AstroBiswas said:
You need to uninstall the drivers & redo the process most times we dont need to manually install the drivers. We install drivers only if flashing doesnt occur(you did the opposite) after installing twrp make sure to clear data(factory reset through it)
Click to expand...
Click to collapse
Oh I found my way into TWRP. Am i supposed to keep it read only or accept swipe to allow modifications?
mehtasu said:
Oh I found my way into TWRP. Am i supposed to keep it read only or accept swipe to allow modifications?
Click to expand...
Click to collapse
Swipe to allow modifications ofcourse how would we change anything without that permission
Thankyou, the guide works perfectly. Just to add when installing twrp, boot directly into recovery, otherwise twrp won't install. Just wanted to put it here so that people don't have to go through other threads.
1. Ask before using someone else's stuff in your guide without providing op links or at least give credits
2. Did you test it before posting if the ota will flash fine? As i highly doubt that
Sudeep Duhoon said:
1. Ask before using someone else's stuff in your guide without providing op links or at least give credits
2. Did you test it before posting if the ota will flash fine? As i highly doubt that
Click to expand...
Click to collapse
Thanks for reminding, credits given to each hardworking dev who made this guide possible
Yup I Did Test May Security Patch arrived via ota & it installed fine, didnt break the api.
AstroBiswas said:
Thanks for reminding, credits given to each hardworking dev who made this guide possible
Yup I Did Test June Security Patch arrived via ota & it installed fine, didnt break the api.
Click to expand...
Click to collapse
The June Security Patch is arrived via OTA now?
Sent from my [device_name] using XDA-Developers Legacy app
The Wolf Dark said:
The June Security Patch is arrived via OTA now?
Click to expand...
Click to collapse
No actually my phone has just arrived I Did this procedure on the day itself
AstroBiswas said:
Thanks for reminding, credits given to each hardworking dev who made this guide possible
Yup I Did Test June Security Patch arrived via ota & it installed fine, didnt break the api.
Click to expand...
Click to collapse
Last update was on june 14 with may security patch. I highly doubt this method works without losing ota
Aftab_khatri said:
Last update was on june 14 with may security patch. I highly doubt this method works without losing ota
Click to expand...
Click to collapse
Oh my bad they provided may patch in june update.
We havent done any kind of detectable large system modification so ota's work
Sudeep Duhoon said:
1. Ask before using someone else's stuff in your guide without providing op links or at least give credits
2. Did you test it before posting if the ota will flash fine? As i highly doubt that
Click to expand...
Click to collapse
Thankyou. I had to search for your thread to take care of some troubleshooting. Also, will surely have to follow the guide to go stock/relock to get furture OTA updates. Never the less a big thank you to you and the other developers for their contributions for this phone. Makes this divice so very worthwhile.
Well its working as mentioned by OP.......
Well done !!!
What if we use the command fastboot boot revovery.img and flash the cam 2 api zip when it boots to twrp or is it necessary to use the command flastboot flash recovery recovery.img
pranavsree00 said:
What if we use the command fastboot boot revovery.img and flash the cam 2 api zip when it boots to twrp or is it necessary to use the command flastboot flash recovery recovery.img
Click to expand...
Click to collapse
I had tried it. It didnt work
AstroBiswas said:
I had tried it. It didnt work
Click to expand...
Click to collapse
pranavsree00 said:
Click to expand...
Click to collapse
if you already have twrp installed then you just have to flash the cam2.zip thats all ...........
& if you don't have twrp then you have to first install twrp using the command by OP & then flash cam2.zip as mentioned it original thread .
Anyone who has done this, please reply to this post if they get the next OTA when released, and installed it without any issues. So that I can perform it without any trouble on updates and warranty...
Amal Prabhakaran said:
Anyone who has done this, please reply to this post if they get the next OTA when released, and installed it without any issues. So that I can perform it without any trouble on updates and warranty...
Click to expand...
Click to collapse
Well just follow the give procedure or steps one by one & relock the bootloader at last and you would be good to go .....
Well I didn't relocked the bootloader & I frequently change my ROMS & regarding updates well there is none after 309 so whenever there would be an update I will give it a try then but for now everything is working fine so you can give it a go .........
EASY ROOT/UNROOT FOR S7 OR S7E ALL NOUGAT OR OREO STOCK ROMS
THANKS @klabit87 FOR OREO ROOT
TEMPORARY TWRP RECOVERY VIA ADB THANKS TO @afaneh92
This is for AT&T, T-Mobile and Verizon and Sprint running V4 bootloaders only!
This tool will allow you too easily root any stock rom allowing you to make any modifications you might want then easily unroot for better performance
This will Also give you a fully functional TWRP recovery that can be accessed via adb. TWRP is fully functional on OREO Roms but is limited on Nougat roms
The initial setup does require a data wipe.
S7 G935T Edge Odin Factory FIrmware Downloads
G935TUVU4CRI2_8.0_4File_USA (T-Mobile).rar
ADB_Root Temporary Twrp Tool Download
S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z
S7 G935 Edge Root/Unroot Odin Files Downloads
These Files Are Needed To Unroot Your Phone
SM_G935_EDGE_OREO.7z
SM_G935_EDGE_NOUGAT.7z
S7 G930 Flat Root/Unroot Odin Files Downloads
These Files Are Needed To Unroot Your Phone
SM_G930_FLAT_OREO.7z
SM_G930_FLAT_NOUGAT.7z
Instructions
1. Download S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z and your model and version you want from above
2. Unzip S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z to S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
3. Unzip the Model/Version file you downloaded and copy the files to the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and place them in the Odin folder
4. Prepare your phone for a data wipe
5. Reboot your phone to download mode and flash the AP_ROOT_G93*.tar in the Odin AP slot and reboot your phone to recovery
6. Once phone is in recovery run the Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
7. Now in the cmd window make sure your device is connected and choose Option (1) Launch TWRP
8. Your phone should launch TWRP leave phone plugged in and command window open on computer
9. Now In Twrp choose wipe and choose format data. Type yes in the box when it ask
10. Now in cmd window choose Option(8) Push Root.zip to Phone
11. Now in TWRP choose install and select the Root.zip
12. After zip is installed reboot and go through setup.
13. Once through setup make sure you are rooted
To Unroot Your Phone
1. In the Root Control app choose phone settings and unroot phone make sure phone is connected to computer
2. Now depending on the type of root you choose your phone will reboot to download if you chose system root or stock recovery if you chose systemless root. If your phone reboots to download mode skip to number 5
3. If your phone reboots to recovery once your phone is in recovery run the Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
4. In cmd window choose Option(3) Unroot phone will reboot too download mode
5. In Odin BL slot choose the BL_G93*_DELETE_CACHE.tar and flash phone will reboot to recovery and say processing update then get an error and strart rebooting recovery
6. Let recovery bootloop at least once thin force phone back to download mode
7. In Odin AP slot flash BL_ENTER_ENG_RECOVERY_G93*.tar and flash phone will reboot to recovery with a bunch of red cache errors
8. In recovery choose wipe cache then reboot back to bootloader from recovery
9. In Odin BL slot choose BL_OREO_STOCK_G93*.tar for Oreo or BL_RESET_DM_VERITY_G93*.tar for Nougat and flash
10. This is important as soon as odin is done flashing and phone powers off immediately hold buttons to force phone to recovery
11. When phone reboots to recovery you will get no command error then when phone shows recovery options in black box at very botton it should say Successfully verified. If it says unsuccessful or failed then start at number 5 again. If successful and on oreo you are done.
12. If on Nougat and successful from recovery reboot to bootloader in Odin BL slot flash BL_NOUGAT_STOCK_G93*.tar
To Reroot Your Phone
1. Reboot to download in Odin AP slot flash AP_ROOT_G93***.tar
2. Phone will reboot then will reboot one more time and you will be rerooted
To Enter TWRP When Rooted
Remember with Nougat TWRP cannot mount data because of encryption so some zips wont work
1. Manually reboot phone to recovery launch Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and choose Option(1) Launch TWRP
2. To Exit TWRP simply choose reboot
To Enter TWRP When Unrooted
Remember with Nougat TWRP cannot mount data because of encryption so some zips wont work
1. Put phone in download mode In Odin AP slot flash AP_ROOT_G93***.tar force phone to reboot to recovery. If you let phone boot it will reroot and you will have to run the unroot from the root control app.
2. In recovery launch Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and choose Option(1) Launch TWRP.
3. Do whatever you need too do
4. To exit Twrp choose reboot to Download
5. In Odin BL slot choose the BL_G93*_DELETE_CACHE.tar and flash phone will reboot to recovery and say processing update then get an error and strart rebooting recovery
6. Let recovery bootloop at least once thin force phone back to download mode
7. In Odin AP slot flash BL_ENTER_ENG_RECOVERY_G93*.tar and flash phone will reboot to recovery with a bunch of red cache errors
8. In recovery choose wipe cache then reboot back to bootloader from recovery
9. In Odin BL slot choose BL_OREO_STOCK_G93*.tar for Oreo or BL_RESET_DM_VERITY_G93*.tar for Nougat and flash
10. This is important as soon as odin is done flashing and phone powers off immediately hold buttons to force phone to recovery
11. When phone reboots to recovery you will get no command error then when phone shows recovery options in black box at very botton it should say Successfully verified. If it says unsuccessful or failed then start at number 5 again. If successful and on oreo you are done.
12. If on Nougat and successful from recovery reboot to bootloader in Odin BL slot flash BL_NOUGAT_STOCK_G93*.tar
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Thank you sir. Amazing is you, works great much better than safestrap and much easier to get into and out of. I hope one day im able to return the favor and help you out with something to make your life easier as you have done with countless people, much appreciated
Thank you so much for all the work you have done here and for injecting this phone with a much needed revitalization.
Now for the first dumb question, what can be flashed? ROMs? Custom Kernel? (Nethunter?) Any idea would ve helpful. Thanks again!
how to know that which version v4 or v8 on are we?
Rehan Ul Hsaan said:
how to know that which version v4 or v8 on are we?
Click to expand...
Click to collapse
The bootloader version is the 5th to last number in the build version
G935XXXX4XXXX
Sent using some kind of device I modified
gdfdedh8d said:
Thank you so much for all the work you have done here and for injecting this phone with a much needed revitalization.
Now for the first dumb question, what can be flashed? ROMs? Custom Kernel? (Nethunter?) Any idea would ve helpful. Thanks again!
Click to expand...
Click to collapse
No custom boot.img can be flashed
Sent using some kind of device I modified
jrkruse said:
The bootloader version is the 5th to last number in the build version
G935XXXX4XXXX
Sent using some kind of device I modified
Click to expand...
Click to collapse
i thinks i updated to "G935TUVS8CRJ1" can i be flash on it?
Quick question. I just used this method to root my phone (v4 bootloader, CRI2 firmware if I'm reading it right). I had been looking at the post [Rom][ALL+CARRIERS_CRF1][Stock_Oreo_Hybrid][Safestrap_Preinstalled]. That one seemed like a good deal because of the followup post on Safestrap flashable zips, like Xposed framework, Extreme Debloater, Dual Speaker, etc....
I didn't consider that ROM because of the big warning Must Be On Stock CRF1, whereas I'm on CRI2 and this looked nicer anyway.
So, just to be sure I understand, now that I've used this method to root my phone I can install all those things and more by using this technique to get into TWRP on my phone. Correct? Further, I can use TWRP in this way to flash anything except a custom bootloader. Yes?
More specifically, all those ROMs listed over in the general Tools Samsung Galaxy S7 Edge ROMs, Kernels, Recoveries, & Other Development forum that say "for G9350 only", I can use this TWRP to flash those on my G935T ?? Is that right?
Rehan Ul Hsaan said:
i thinks i updated to "G935TUVS8CRJ1" can i be flash on it?
Click to expand...
Click to collapse
Nope that's v8
jrkruse said:
Nope that's v8
Click to expand...
Click to collapse
My bad luck ?
Rehan Ul Hsaan said:
My bad luck
Click to expand...
Click to collapse
Should have been aware of what you are flashing a bootloader update is always an attempt to patch something. Usually root related. It is never to benefit the user. The first indication to me would have been a 4 version jump in bootloader versions all in one shot. I warned people all along that a bootloader change would come one of these days and kill root. Sprint seen it months ago. Tmobile and Sprint can now have there cozy little relationship with one another. I feel bad for you tmobile people. Remember when tmobile was the friendly carrier in the dev community along with sprint as well now they are the most unfriendly carrier in the dev community.
SailorJoe6 said:
Quick question. I just used this method to root my phone (v4 bootloader, CRI2 firmware if I'm reading it right). I had been looking at the post [Rom][ALL+CARRIERS_CRF1][Stock_Oreo_Hybrid][Safestrap_Preinstalled]. That one seemed like a good deal because of the followup post on Safestrap flashable zips, like Xposed framework, Extreme Debloater, Dual Speaker, etc....
I didn't consider that ROM because of the big warning Must Be On Stock CRF1, whereas I'm on CRI2 and this looked nicer anyway.
So, just to be sure I understand, now that I've used this method to root my phone I can install all those things and more by using this technique to get into TWRP on my phone. Correct? Further, I can use TWRP in this way to flash anything except a custom bootloader. Yes?
More specifically, all those ROMs listed over in the general Tools Samsung Galaxy S7 Edge ROMs, Kernels, Recoveries, & Other Development forum that say "for G9350 only", I can use this TWRP to flash those on my G935T ?? Is that right?
Click to expand...
Click to collapse
Twrp gives you no more options than you had before. You cannot just magically go flashing anything you want just because you have twrp. You can run a stock rom and mod it a little and that is it
How do you know what bootloader you're running?
i can not install this metod .
i have problem with sw. rev check faiL device, can any dody help me & please
i use OS G935TUVS8CRJ1
Does this require the fixes for lag/battery life?
jrkruse said:
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Click to expand...
Click to collapse
im exactly onthis s7 verizon heroltevzw sm g930v latest firmware oreo8.0
v8 bootloader locked:laugh:
can i downgrade and follow your path,s?
if no f9vk it
then time to move on upgrade, please can you recomend me some decent device better/much better than s7 that i can root without bricked it down to paperweight?
thankyou
much appreciated
cheers
omgaruda said:
can i downgrade and follow your path,s?
if no f9vk it
then time to move on upgrade, please can you recomend me some decent device better/much better than s7 that i can root without bricked it down to paperweight?
Click to expand...
Click to collapse
No, if your build number indicates that you're on the v8 bootloader, you're screwed for now. If you like the S7's features, you can grab an Exynos. Those you can root and modify to your heart's content. Plenty of custom ROMs available. It's not too expensive either. It's what I'm going to upgrade to, since I'm tired of this bull with the bootloader, and my glass is cracked anyway. Would probably cost nearly as much to repair as to just buy an Exynos.
S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z this is a trojan
Ihavetodothis said:
S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z this is a trojan
Click to expand...
Click to collapse
That's a false positive by a single antivirus program. VirusTotal gives it clean on 54 out of 56 antivirus programs, and one of those is merely "suspicious," probably because it's a rooting tool.
EASY ROOT/UNROOT FOR S7 OR S7E ALL NOUGAT OR OREO STOCK ROMS
THANKS @klabit87 FOR OREO ROOT
TEMPORARY TWRP RECOVERY VIA ADB THANKS TO @afaneh92
This is for AT&T, T-Mobile and Verizon and Sprint running V4 bootloaders only!
This tool will allow you too easily root any stock rom allowing you to make any modifications you might want then easily unroot for better performance
This will Also give you a fully functional TWRP recovery that can be accessed via adb. TWRP is fully functional on OREO Roms but is limited on Nougat roms
The initial setup does require a data wipe.
S7 G930T Flat Odin Factory FIrmware Downloads
G930TUVU4CRI2_8.0_4File_USA (T-Mobile).rar
ADB_Root Temporary Twrp Tool Download
S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z
S7 G935 Edge Root/Unroot Odin Files Downloads
These Files Are Needed To Unroot Your Phone
SM_G935_EDGE_OREO.7z
SM_G935_EDGE_NOUGAT.7z
S7 G930 Flat Root/Unroot Odin Files Downloads
These Files Are Needed To Unroot Your Phone
SM_G930_FLAT_OREO.7z
SM_G930_FLAT_NOUGAT.7z
Instructions
1. Download S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z and your model and version you want from above
2. Unzip S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z to S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
3. Unzip the Model/Version file you downloaded and copy the files to the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and place them in the Odin folder
4. Prepare your phone for a data wipe
5. Reboot your phone to download mode and flash the AP_ROOT_G93*.tar in the Odin AP slot and reboot your phone to recovery
6. Once phone is in recovery run the Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
7. Now in the cmd window make sure your device is connected and choose Option (1) Launch TWRP
8. Your phone should launch TWRP leave phone plugged in and command window open on computer
9. Now In Twrp choose wipe and choose format data. Type yes in the box when it ask
10. Now in cmd window choose Option(8) Push Root.zip to Phone
11. Now in TWRP choose install and select the Root.zip
12. After zip is installed reboot and go through setup.
13. Once through setup make sure you are rooted
To Unroot Your Phone
1. In the Root Control app choose phone settings and unroot phone make sure phone is connected to computer
2. Now depending on the type of root you choose your phone will reboot to download if you chose system root or stock recovery if you chose systemless root. If your phone reboots to download mode skip to number 5
3. If your phone reboots to recovery once your phone is in recovery run the Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
4. In cmd window choose Option(3) Unroot phone will reboot too download mode
5. In Odin BL slot choose the BL_G93*_DELETE_CACHE.tar and flash phone will reboot to recovery and say processing update then get an error and strart rebooting recovery
6. Let recovery bootloop at least once thin force phone back to download mode
7. In Odin AP slot flash BL_ENTER_ENG_RECOVERY_G93*.tar and flash phone will reboot to recovery with a bunch of red cache errors
8. In recovery choose wipe cache then reboot back to bootloader from recovery
9. In Odin BL slot choose BL_OREO_STOCK_G93*.tar for Oreo or BL_RESET_DM_VERITY_G93*.tar for Nougat and flash
10. This is important as soon as odin is done flashing and phone powers off immediately hold buttons to force phone to recovery
11. When phone reboots to recovery you will get no command error then when phone shows recovery options in black box at very botton it should say Successfully verified. If it says unsuccessful or failed then start at number 5 again. If successful and on oreo you are done.
12. If on Nougat and successful from recovery reboot to bootloader in Odin BL slot flash BL_NOUGAT_STOCK_G93*.tar
To Reroot Your Phone
1. Reboot to download in Odin AP slot flash AP_ROOT_G93***.tar
2. Phone will reboot then will reboot one more time and you will be rerooted
To Enter TWRP When Rooted
Remember with Nougat TWRP cannot mount data because of encryption so some zips wont work
1. Manually reboot phone to recovery launch Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and choose Option(1) Launch TWRP
2. To Exit TWRP simply choose reboot
To Enter TWRP When Unrooted
Remember with Nougat TWRP cannot mount data because of encryption so some zips wont work
1. Put phone in download mode In Odin AP slot flash AP_ROOT_G93***.tar force phone to reboot to recovery. If you let phone boot it will reroot and you will have to run the unroot from the root control app.
2. In recovery launch Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and choose Option(1) Launch TWRP.
3. Do whatever you need too do
4. To exit Twrp choose reboot to Download
5. In Odin BL slot choose the BL_G93*_DELETE_CACHE.tar and flash phone will reboot to recovery and say processing update then get an error and strart rebooting recovery
6. Let recovery bootloop at least once thin force phone back to download mode
7. In Odin AP slot flash BL_ENTER_ENG_RECOVERY_G93*.tar and flash phone will reboot to recovery with a bunch of red cache errors
8. In recovery choose wipe cache then reboot back to bootloader from recovery
9. In Odin BL slot choose BL_OREO_STOCK_G93*.tar for Oreo or BL_RESET_DM_VERITY_G93*.tar for Nougat and flash
10. This is important as soon as odin is done flashing and phone powers off immediately hold buttons to force phone to recovery
11. When phone reboots to recovery you will get no command error then when phone shows recovery options in black box at very botton it should say Successfully verified. If it says unsuccessful or failed then start at number 5 again. If successful and on oreo you are done.
12. If on Nougat and successful from recovery reboot to bootloader in Odin BL slot flash BL_NOUGAT_STOCK_G93*.tar
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
jrkruse said:
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Click to expand...
Click to collapse
I had to look this up so thought I'd share This is for Tmobile Versions
Example: G930TUVS8CRJ1 (5th # from right is 8, BL version - this is found in Settings>About Phone>Software Information>Baseband Version)
Which Oreo versions are safe (ver 4):
G930TUVU4CRI2 Oct 1, 2018
G930TUVU4CRF1 June 28, 2018
Not safe (ver 8):
G930TUVS8CRJ1 Oct 26, 2018 release date
---------- Post added at 02:55 AM ---------- Previous post was at 02:49 AM ----------
BTW nice work as always Jr! Oh, & almost forgot ...your last comment saved my @zz!!! I wasn't aware of the ver 8 issue, and the fact that u can't downgrade!! DAMN Samsung!!!!! I was seriously about to try this latest update just to try & figure out RCS not working on CRF1 & randomly came across this! THANKS! (BTW if you know anything about RCS on s7 or services/apks needed for functionality on CRF1 please pm me!)
On another note, let's have a contest to see who can hold on to the S7 the longest as their primary phone
It works perfectly , I had no problem installing it. But I have a question:
Could I replace the SuperSu with the Magisk?
I am also in the Rom Project L S7 of Lanc-City: 3
FranMLG said:
It works perfectly , I had no problem installing it. But I have a question:
Could I replace the SuperSu with the Magisk?
I am also in the Rom Project L S7 of Lanc-City: 3
Click to expand...
Click to collapse
No magisk requires custom boot.img
Sent using some kind of device I modified
jrkruse said:
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Click to expand...
Click to collapse
Thanks for the effort and providing root for T-Mobile. Perhaps I am an unlucky person. By the time I discovered this thread, my phone was already updated to G930TUVS8CRJ1 version. I am wondering if there is any hope for V8 bootloader to root their phone in near future. Here is my humble request if you could provide root for V8 update. TIA.
jrkruse said:
No magisk requires custom boot.img
Sent using some kind of device I modified
Click to expand...
Click to collapse
can we do full backup after setting up the phone and then restore it without any bugs and issues?
zfk110 said:
can we do full backup after setting up the phone and then restore it without any bugs and issues?
Click to expand...
Click to collapse
Do a system.img backup
Sent using some kind of device I modified
Thank you. It worked fine on my nougat s7 flat with v4 bootloader. Now I have nougat root. I have a question if I may, Can I use tmp twrp to flash Oreo or one of your, or other roms? Or would I need to upgrade the kernel or something because I can flash Oreo being that I'm on Nougat. Thanks.
boofbatch said:
Thank you. It worked fine on my nougat s7 flat with v4 bootloader. Now I have nougat root. I have a question if I may, Can I use tmp twrp to flash Oreo or one of your, or other roms? Or would I need to upgrade the kernel or something because I can flash Oreo being that I'm on Nougat. Thanks.
Click to expand...
Click to collapse
You have to update bootloaders and firmware as well so its better to update to oreo first
Sent using some kind of device I modified
working fine.
update: gonna have to switch back to u firmware because even when i unroot the phone, certain games wont work or connect to server. i cant install magisk to bypass safetynet or hide magisk after installing so root isnt even seeming worth it on this device. might as well stick to the u firmware and disable the apps I dont need and disable ota update so that i dont get the v8 bootloader update. It was fun while it lasted.
jrkruse said:
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Click to expand...
Click to collapse
Man, will you update the Recovery for the new security patch (CRJ1) ?, I've run out of Root , and I can no longer go back in the version.
---------- Post added at 04:50 PM ---------- Previous post was at 04:47 PM ----------
jrkruse said:
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Click to expand...
Click to collapse
That's exactly what happened to me, I did not know
FranMLG said:
Man, will you update the Recovery for the new security patch (CRJ1) ?, I've run out of Root , and I can no longer go back in the version.
---------- Post added at 04:50 PM ---------- Previous post was at 04:47 PM ----------
That's exactly what happened to me, I did not know
Click to expand...
Click to collapse
yikes sorry to hear that
jrkruse said:
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Click to expand...
Click to collapse
I bought a phone which is already to g930tuvs8crj1 I tried to down grade but it wont let me, what are my options? Thanks
zfk110 said:
I bought a phone which is already to g930tuvs8crj1 I tried to down grade but it wont let me, what are my options? Thanks
Click to expand...
Click to collapse
Enjoy Stock
Sent using some kind of device I modified
jrkruse said:
Enjoy Stock
Sent using some kind of device I modified
Click to expand...
Click to collapse
After looking around for 4 days I was finally able to find G930T U8 ENG ROOT Modem.bin file, but when I'm trying to flash it using odin it wont pass file Analyzing
I hope you can look more into it. if we can flash this then we can able to root U8 bootloaders too
https://drive.google.com/open?id=1dhHeYAPsCqKQ_eFfuzPaYbgFv0y1BSLr
These guys also selling Eng boot for $60
https://support.halabtech.com/index.php?a=downloads&b=file&id=90428
zfk110 said:
After looking around for 4 days I was finally able to find G930T U8 ENG ROOT Modem.bin file, but when I'm trying to flash it using odin it wont pass file Analyzing
I hope you can look more into it. if we can flash this then we can able to root U8 bootloaders too
https://drive.google.com/open?id=1dhHeYAPsCqKQ_eFfuzPaYbgFv0y1BSLr
These guys also selling Eng boot for $60
https://support.halabtech.com/index.php?a=downloads&b=file&id=90428
Click to expand...
Click to collapse
Im just waiting on them to email me the passwords
Sent using some kind of device I modified
Alright guys i really need your help...i just bought a used samsung. galaxy s7 G930T...the problem is it doesnt get any network...thr signal says searching and theres is nl network bar...the issue is i cant tell if it is unlocked or not..because it reads my sim...it displays the right access point....shoes sim tools...but just doesn't get network..i ve tried all sim cards...i tried using the tmobile unlock tool that came with the device butbit says unlock failed reboot device repeatedly....ive tried factory reset....i love this phone and would really like to use it...Pls any suggestions or help...the software version is 8.0. baseband version is G930TUVS8CRL1
marvelv94 said:
Alright guys i really need your help...i just bought a used samsung. galaxy s7 G930T...the problem is it doesnt get any network...thr signal says searching and theres is nl network bar...the issue is i cant tell if it is unlocked or not..because it reads my sim...it displays the right access point....shoes sim tools...but just doesn't get network..i ve tried all sim cards...i tried using the tmobile unlock tool that came with the device butbit says unlock failed reboot device repeatedly....ive tried factory reset....i love this phone and would really like to use it...Pls any suggestions or help...the software version is 8.0. baseband version is G930TUVS8CRL1
Click to expand...
Click to collapse
Sounds like you bought yourself a blacklisted phone
Sent using some kind of device I modified
jrkruse said:
Sounds like you bought yourself a blacklisted phone
Sent using some kind of device I modified
Click to expand...
Click to collapse
It is not blacklisted ...i already checked...any help?
EASY ROOT/UNROOT FOR S7 OR S7E ALL NOUGAT OR OREO STOCK ROMS
THANKS @klabit87 FOR OREO ROOT
TEMPORARY TWRP RECOVERY VIA ADB THANKS TO @afaneh92
This is for AT&T, T-Mobile and Verizon and Sprint running V4 bootloaders only!
This tool will allow you too easily root any stock rom allowing you to make any modifications you might want then easily unroot for better performance
This will Also give you a fully functional TWRP recovery that can be accessed via adb. TWRP is fully functional on OREO Roms but is limited on Nougat roms
The initial setup does require a data wipe.
S7 G935V Edge Odin Factory FIrmware Downloads
G935VVRS4CRI1_G935VVZW4CRI1_VZW_Verizon_USA_v8.0_Oreo.zip
ADB_Root Temporary Twrp Tool Download
S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z
S7 G935 Edge Root/Unroot Odin Files Downloads
These Files Are Needed To Unroot Your Phone
SM_G935_EDGE_OREO.7z
SM_G935_EDGE_NOUGAT.7z
S7 G930 Flat Root/Unroot Odin Files Downloads
These Files Are Needed To Unroot Your Phone
SM_G930_FLAT_OREO.7z
SM_G930_FLAT_NOUGAT.7z
Instructions
1. Download S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z and your model and version you want from above
2. Unzip S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z to S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
3. Unzip the Model/Version file you downloaded and copy the files to the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and place them in the Odin folder
4. Prepare your phone for a data wipe
5. Reboot your phone to download mode and flash the AP_ROOT_G93*.tar in the Odin AP slot and reboot your phone to recovery
6. Once phone is in recovery run the Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
7. Now in the cmd window make sure your device is connected and choose Option (1) Launch TWRP
8. Your phone should launch TWRP leave phone plugged in and command window open on computer
9. Now In Twrp choose wipe and choose format data. Type yes in the box when it ask
10. Now in cmd window choose Option(8) Push Root.zip to Phone
11. Now in TWRP choose install and select the Root.zip
12. After zip is installed reboot and go through setup.
13. Once through setup make sure you are rooted
To Unroot Your Phone
1. In the Root Control app choose phone settings and unroot phone make sure phone is connected to computer
2. Now depending on the type of root you choose your phone will reboot to download if you chose system root or stock recovery if you chose systemless root. If your phone reboots to download mode skip to number 5
3. If your phone reboots to recovery once your phone is in recovery run the Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
4. In cmd window choose Option(3) Unroot phone will reboot too download mode
5. In Odin BL slot choose the BL_G93*_DELETE_CACHE.tar and flash phone will reboot to recovery and say processing update then get an error and strart rebooting recovery
6. Let recovery bootloop at least once thin force phone back to download mode
7. In Odin AP slot flash BL_ENTER_ENG_RECOVERY_G93*.tar and flash phone will reboot to recovery with a bunch of red cache errors
8. In recovery choose wipe cache then reboot back to bootloader from recovery
9. In Odin BL slot choose BL_OREO_STOCK_G93*.tar for Oreo or BL_RESET_DM_VERITY_G93*.tar for Nougat and flash
10. This is important as soon as odin is done flashing and phone powers off immediately hold buttons to force phone to recovery
11. When phone reboots to recovery you will get no command error then when phone shows recovery options in black box at very botton it should say Successfully verified. If it says unsuccessful or failed then start at number 5 again. If successful and on oreo you are done.
12. If on Nougat and successful from recovery reboot to bootloader in Odin BL slot flash BL_NOUGAT_STOCK_G93*.tar
To Reroot Your Phone
1. Reboot to download in Odin AP slot flash AP_ROOT_G93***.tar
2. Phone will reboot then will reboot one more time and you will be rerooted
To Enter TWRP When Rooted
Remember with Nougat TWRP cannot mount data because of encryption so some zips wont work
1. Manually reboot phone to recovery launch Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and choose Option(1) Launch TWRP
2. To Exit TWRP simply choose reboot
To Enter TWRP When Unrooted
Remember with Nougat TWRP cannot mount data because of encryption so some zips wont work
1. Put phone in download mode In Odin AP slot flash AP_ROOT_G93***.tar force phone to reboot to recovery. If you let phone boot it will reroot and you will have to run the unroot from the root control app.
2. In recovery launch Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and choose Option(1) Launch TWRP.
3. Do whatever you need too do
4. To exit Twrp choose reboot to Download
5. In Odin BL slot choose the BL_G93*_DELETE_CACHE.tar and flash phone will reboot to recovery and say processing update then get an error and strart rebooting recovery
6. Let recovery bootloop at least once thin force phone back to download mode
7. In Odin AP slot flash BL_ENTER_ENG_RECOVERY_G93*.tar and flash phone will reboot to recovery with a bunch of red cache errors
8. In recovery choose wipe cache then reboot back to bootloader from recovery
9. In Odin BL slot choose BL_OREO_STOCK_G93*.tar for Oreo or BL_RESET_DM_VERITY_G93*.tar for Nougat and flash
10. This is important as soon as odin is done flashing and phone powers off immediately hold buttons to force phone to recovery
11. When phone reboots to recovery you will get no command error then when phone shows recovery options in black box at very botton it should say Successfully verified. If it says unsuccessful or failed then start at number 5 again. If successful and on oreo you are done.
12. If on Nougat and successful from recovery reboot to bootloader in Odin BL slot flash BL_NOUGAT_STOCK_G93*.tar
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Does the root help battery life/lag at all or does it make it worse like it did in Nougat? Thanks.
qwertyjuice said:
Does the root help battery life/lag at all or does it make it worse like it did in Nougat? Thanks.
Click to expand...
Click to collapse
This method can be used on VERIZON with G953U OREO ROM installed
shjeanpy said:
This method can be used on VERIZON with G953U OREO ROM installed
Click to expand...
Click to collapse
If you mean G935U yes it should work
Sent using some kind of device I modified
jrkruse said:
If you mean G935U yes it should work
Sent using some kind of device I modified
Click to expand...
Click to collapse
I will try and if it must fix lag and freeze issues
S7 G935V Edge Odin Factory FIrmware Downloads
Why when I download it shonw like G930 firmware
shjeanpy said:
S7 G935V Edge Odin Factory FIrmware Downloads
Why when I download it shonw like G930 firmware
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=11410932744536990831
Sent using some kind of device I modified
jrkruse said:
If you mean G935U yes it should work
Sent using some kind of device I modified
Click to expand...
Click to collapse
Thanks I have rooted from G935U factory rom but the device still lagging and freeze issues how can I get solutions to this issues for G935V MODEL
shjeanpy said:
Thanks I have rooted from G935U factory rom but the device still lagging and freeze issues how can I get solutions to this issues for G935V MODEL
Click to expand...
Click to collapse
Thats why its called root/unroot. Root when you need to add a mod or change something then unroot when you are done
Sent using some kind of device I modified
Hi,
Will this method of rooting/unrooting trip Knox and void my warranty? If so, is there any way of rooting my S7 G935V Edge without tripping Knox?
Thanks
actrite said:
Hi,
Will this method of rooting/unrooting trip Knox and void my warranty? If so, is there any way of rooting my S7 G935V Edge without tripping Knox?
Thanks
Click to expand...
Click to collapse
Currently, I'm pretty sure it is virtually impossible for yout to trip your knox counter by rooting as far as I'm aware the only way to do so would mean you need to unlock your bootloader which cannot be done. Rooting your device will however disable safetynet and knox features such as but not limitted to android/samsung pay ect. This is why it's called east root/unroot though because once you unroot and if you didn't delete knox/google apps, it all should still work. The point of this is of course, so you can modify your phone with ease, then unroot and everything should work properly.
There is a major difference between rooting and unlocking the bootloader.
Just don't do something like attempt to install a custom ASOP rom or kernel that isn't supported by this device since it requires an unloocked bootloader.
I'm so glad I read everything before jumping into anything right away. Haha Verizon and Smart Switch are trying to get me to accept the new update to the V8 as we speak. It's funny how they always seem to have updates when someone like Jrkruse figures out how to let us actually do what we want with our devices. I have learned always read read read before doing anything to any phone unless you want to take an update meant to stop us from doing anything fun with the phones. Good job sir!!
jrkruse said:
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Click to expand...
Click to collapse
Hello, when attempting to unroot using the supersu app, when i hit Full Unroot in the Cleanup section, the popup window warning about the unroot only has a selection of "OK" when I select that, nothing happens.
Also, the S7E root_unroot_abd_tools.z7 does not have a setup.exe that I saw, I am looking to unroot my phone that I followed the instructions for the S7_Oreo_Nougat_Adb_Advanced_Root_V11.zip method that you ended up moving that thread here.
@jrkruse
Sticky1234 said:
Hello, when attempting to unroot using the supersu app, when i hit Full Unroot in the Cleanup section, the popup window warning about the unroot only has a selection of "OK" when I select that, nothing happens.
Also, the S7E root_unroot_abd_tools.z7 does not have a setup.exe that I saw, I am looking to unroot my phone that I followed the instructions for the S7_Oreo_Nougat_Adb_Advanced_Root_V11.zip method that you ended up moving that thread here.
@jrkruse
Click to expand...
Click to collapse
Did you download the stuff from this OP
As per the instructions you use the root control app not the supersu app in the root control app under phone settings there is an unroot tab
Sent using some kind of device I modified
jrkruse said:
Did you download the stuff from this OP
As per the instructions you use the root control app not the supersu app in the root control app under phone settings there is an unroot tab
Click to expand...
Click to collapse
I downloaded the files for unrooting my s7 edge oreoof this OP, and I downloaded the file for step 3 in the unrooting section of this OP.
The zip named S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z that I received from this OP did not contain a setup.exe as well.
The actual root file and process I followed was from https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616
Sticky1234 said:
I downloaded the files for unrooting my s7 edge oreoof this OP, and I downloaded the file for step 3 in the unrooting section of this OP.
The zip named S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z that I received from this OP did not contain a setup.exe as well.
The actual root file and process I followed was from https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616
Click to expand...
Click to collapse
Redownload the stuff in the OP and follow these directions
jrkruse said:
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Click to expand...
Click to collapse
I know I'm asking this in two places now... but how do I prevent this? Which firmware version do I *NOT* Update to?
I've finally summoned the courage to upgrade to oreo with the advances in TWRP and such... so I'm assuming I have to flash to stock Oreo....... but which version is the one before v8?
How do I check my version of BL?
sylikc said:
I know I'm asking this in two places now... but how do I prevent this? Which firmware version do I *NOT* Update to?
I've finally summoned the courage to upgrade to oreo with the advances in TWRP and such... so I'm assuming I have to flash to stock Oreo....... but which version is the one before v8?
How do I check my version of BL?
Click to expand...
Click to collapse
Easiest way... Settings>about phone>software info. Look at build number and baseband version. Count back 5 digits. Will either be a 2, 4, or 8
So if I install this U firmware G935UUES4CRH2 I should still be good to root correct? Also, is there any difference between the U firmware and the Latest non V8 Verizon firmware, other than maybe the Verizon bloat? I am running my phone on Verizon just wanted to see if there a difference between the two?
lvpre said:
Easiest way... Settings>about phone>software info. Look at build number and baseband version. Count back 5 digits. Will either be a 2, 4, or 8
Click to expand...
Click to collapse