Database Develop

[GUIDE] Marshmallow Root Guide for ZE500KL

ATTENTION!
You MUST read all the guide BEFORE doing it, if you do it without reading all of it first you may ends up bricking your phone!
Prerequisites:
Asus ZE500KL (may work on ZE500KG, but haven't tested, do it on your own risk) on Marshmallow, NOT LOLLIPOP!
Also, it must have fully booted AT LEAST one time, otherwise, you'll soft-brick it.
If your phone is not on Marshmallow, you can use THIS guide instead​Download and put the unlocker zip file and the SuperSu zip file in the phone
How To:
1 - Install adb and fastboot driver (follow THIS guide)
Now you can connect the phone to your computer​2 - Reboot in fastboot mode with one of the following method:
a -Volume Up while booting up​b -With adb, after enabling USB debugging in developer settings, using:
Code:
adb reboot bootloader
Now that you are in bootloader, you have to boot in TWRP,
download THIS recovery (is the twrp one) and boot in to it, using this command:
IMPORTANT: DON'T FLASH IT OR YOU WILL GET BOOTLOOP!!!
Code:
fastboot boot TWRP-x-x-x-x.img
(Obviusly the recovery name must be the one you downloaded)
IMPORTANT: DON'T FLASH IT OR YOU WILL GET BOOTLOOP!!!
It should automaticaly enter in recovery.
Now you MUST flash FIRST ZE500KL_BootloaderUnlock.zip, otherwise you'll brick your phone
Btw, the recovery will mount your phone's memory, so you can put now the files in the phone, if you forgot to do it before​
AFTER you installed the unlocker zip, you can install the SuperSu zip
When the install is complete, clear the cache and reboot your phone, now you can enjoy your root!
Downloads:
Latest @MiauLightouch TWRP - 3.0.0.2 Mirror
Latest SuperSu zip - 2.65 Mirror
Bootloader Unlocker (from @MiauLightouch original post) - Mirror
Credits:
@MiauLightouch for pretty much everything
@LuK1337 , @luca020400 and everyone on #titandev for being awesome

So.. I'm thinking of buying a ZE500KL and I've been doing some reading on this phone on the forums.. did it really just get unlocked like yesterday? does that mean custom roms from now on?

MuzgontarAco said:
So.. I'm thinking of buying a ZE500KL and I've been doing some reading on this phone on the forums.. did it really just get unlocked like yesterday? does that mean custom roms from now on?
Click to expand...
Click to collapse
I would recommend Z00L/T, you will get cm13, official unlock at least.

You Say " May Work On ZE500KG" Is ze500kg already receive Marshmallow Update?

MiauLightouch said:
I would recommend Z00L/T, you will get cm13, official unlock at least.
Click to expand...
Click to collapse
thanks for the advice but my choices are poor with about 5 phones in this price range with this one looking waay better.. getting it via contract so yeah..

How to install supersu zip? Tia.

Working! Have you tried to flash Viper4Android? On lollipop this will break Call recording and FM Radio, maybe this will not be a problem on MM?

Seanjhon027 said:
How to install supersu zip? Tia.
Click to expand...
Click to collapse
Inside TWRP there is a big "Install" button, press it and select the zip

what is the meaning of booted

mohamedelkholy said:
what is the meaning of booted
Click to expand...
Click to collapse
context?

until you saw the lock screen, that's what "booted".

stuck waiting for device
C:\Users\Clynt\Desktop\Android M>adb reboot bootloader
C:\Users\Clynt\Desktop\Android M>fastboot boot twrp.img
< waiting for device >
Ok I don't know where I get wrong but I got this error.
Img file name is ok because I renamed it.
Drivers were installed already.
Developers mode is enabled already.
Windows 7 64bit
Tried rooting this using lollipop and everything went well.
thanks!
UPDATE: i got it. it has something to do with the drivers.

Without opening the bootloader.
Notice. I have not tried it.
http://www.asus-zenfone.com/2016/05/how-to-root-asus-zenfone-2-laser-ze50kl-marshmallow.html?m=1

thanl you man i have rooted my zenfone 2 laser

Thanks very much for this guide and your work.

Can I install the new update v13.10.7.1 when I opened bootloader.

The twrp recovery is temporary or permanent? If permanent how to go back to stock recovery? Tia

thanks
thks TS
now my phone its rooted

Muminek111 said:
Without opening the bootloader.
Notice. I have not tried it.
No... when trace a perequisite link Given..
you really need to unlock bootloader first
wulfe13 said:
The twrp recovery is temporary or permanent? If permanent how to go back to stock recovery? Tia
Click to expand...
Click to collapse
i think isnt permanent, this step is needed to boot into twrp then flashing a unlockBL..
to make permanent.. the command must "fastboot flash recovery twrp_X.X.X.X.img"
but make sure to unlock bootloader first...
CMIIW
Click to expand...
Click to collapse

Is it me or everytime I reboot the device after rooted, it's going back to unrooted?
Root is a success tho, great job, OP!
Edit: okay, not every reboot, but after several reboots, then it went back unrooted

[Recovery][LG-H960A] TWRP v3.0.2-0 (unofficial)

This is an unofficial TWRP port for LG-H960A.
Thanks to @KAsp3rd and @GROGG88
I DON'T TAKE ANY RESPONSIBILITY. YOU DO EVERYTHING AT YOUR OWN RISK.
READ EVERYTHING and MAKE A BACKUP BEFORE YOU START.
Instructions:
1. You must be on newest stock Marshmallow: H960A20a_00_0316.kdz
You can use LG Bridge to install official update, or download .kdz file HERE
2. You need to have bootloader ulocked.
Official instructions are here: ( Unlocking the Bootloader @ LG Developer )
Remember that this will completely WIPE YOUR DATA, you will LOSE WARRANTY and this operation is IRREVERSIBLE.
3. Flash TWRP.
I assume you got ADB and FASTBOOT drivers working and adb is paired (it should be if you completed step 2).
Connect your phone to your pc, open command prompt and reboot to bootloader:
Code:
adb reboot bootloader
Your phone should reboot and you should be welcomed by Fastboot Mode screen.
Now download the recovery file (below) to your pc, unpack (to get .img) and rename it to recovery.img and put it in folder where you got command prompt open and:
Code:
fastboot flash recovery recovery.img
4. Boot to TWRP.
As on Marshmallow some fastboot commands are not working and LG is restoring recovery on every boot (so you cant use "adb reboot recovery" right now) you need to use one trick.
DO NOT REBOOT YOUR PHONE.
When still in fastboot from step 3 you need to turn off your phone completely. You can do that by holding power button or if that is not working take the battery out.
Now (put the battery in) and press POWER + VOL DOWN buttons. When you see LG logo release the POWER button (while still holding VOL DOWN) and press POWER button again.
You should see a screen which is asking you if you want to factory reset your phone. Don't worry - if you made everything correctly it should not wipe your phone.
Use volume and power buttons to choose YES (twice) - and you should see a TWRP screen (after a while)
WARNING: IF YOU REBOOTED YOUR PHONE AFTER FLASHING RECOVERY THIS STEP WILL REALLY ERASE ALL DATA. You need to flash recovery again (step 3)
5. (optional) flash SuperSU to get root.
Get SuperSU from official thread and put it in your phone.
While in TWRP from step 4 your phone should be recognized by ADB. Use below to move file to sdcard.
Code:
adb push BETA-SuperSU-v2.74-2-20160519174328.zip /sdcard/supersu.zip
Now in TWRP click Install, go to /sdcard/ and chooose supersu.zip. Follow instructions. After install you should choose to wipe cache/dalvik and reboot to system.
Your phone should be rooted now.
Download:
twrp-3.0.2.0-0-h960a.img.zip
(unpack .zip to get flashable .img)
Issues:
- Layout is wrong, status bar is being drawn on second screen.
- Date/time is wrong.

broken url

OK, now if we have recovery, is it possible to dump rooted system and pack it to .tot file for people who don't want to lose warranty?

11868 said:
broken url
Click to expand...
Click to collapse
Oh, true. Fixed.
rascal0pl said:
OK, now if we have recovery, is it possible to dump rooted system and pack it to .tot file for people who don't want to lose warranty?
Click to expand...
Click to collapse
Maybe.

Thank You it worked!

Great. Just bought it 2 days ago for good price. Will try it.
Sent from my LG-H955 using Tapatalk

Hi,
that's just great, thanks a lot.
As root is now possible has anyone tried to install xposed on th H960A?
I'm wondering if the second screen fix for the Telekom V10 also works with the H960A.
What about Viper4Android and AdAway?

rudi666 said:
This is an unofficial TWRP port for LG-H960A.
Thanks to @KAsp3rd and @GROGG88
I DON'T TAKE ANY RESPONSIBILITY. YOU DO EVERYTHING AT YOUR OWN RISK.
READ EVERYTHING and MAKE A BACKUP BEFORE YOU START.
Instructions:
1. You must be on newest stock Marshmallow: H960A20a_00_0316.kdz
You can use LG Bridge to install official update, or download .kdz file HERE
2. You need to have bootloader ulocked.
Official instructions are here: ( Unlocking the Bootloader @ LG Developer )
Remember that this will completely WIPE YOUR DATA, you will LOSE WARRANTY and this operation is IRREVERSIBLE.
3. Flash TWRP.
I assume you got ADB and FASTBOOT drivers working and adb is paired (it should be if you completed step 2).
Connect your phone to your pc, open command prompt and reboot to bootloader:
Code:
adb reboot bootloader
Your phone should reboot and you should be welcomed by Fastboot Mode screen.
Now download the recovery file (below) to your pc, unpack (to get .img) and rename it to recovery.img and put it in folder where you got command prompt open and:
Code:
fastboot flash recovery recovery.img
4. Boot to TWRP.
As on Marshmallow some fastboot commands are not working and LG is restoring recovery on every boot (so you cant use "adb reboot recovery" right now) you need to use one trick.
DO NOT REBOOT YOUR PHONE.
When still in fastboot from step 3 you need to turn off your phone completely. You can do that by holding power button or if that is not working take the battery out.
Now (put the battery in) and press POWER + VOL DOWN buttons. When you see LG logo release the POWER button (while still holding VOL DOWN) and press POWER button again.
You should see a screen which is asking you if you want to factory reset your phone. Don't worry - if you made everything correctly it should not wipe your phone.
Use volume and power buttons to choose YES (twice) - and you should see a TWRP screen (after a while)
WARNING: IF YOU REBOOTED YOUR PHONE AFTER FLASHING RECOVERY THIS STEP WILL REALLY ERASE ALL DATA. You need to flash recovery again (step 3)
5. (optional) flash SuperSU to get root.
Get SuperSU from official thread and put it in your phone.
While in TWRP from step 4 your phone should be recognized by ADB. Use below to move file to sdcard.
Code:
adb push BETA-SuperSU-v2.74-2-20160519174328.zip /sdcard/supersu.zip
Now in TWRP click Install, go to /sdcard/ and chooose supersu.zip. Follow instructions. After install you should choose to wipe cache/dalvik and reboot to system.
Your phone should be rooted now.
Download:
twrp-3.0.2.0-0-h960a.img.zip
(unpack .zip to get flashable .img)
Issues:
- Layout is wrong, status bar is being drawn on second screen.
- Date/time is wrong.
Click to expand...
Click to collapse
Are there any other known issues? I don`t need to install any custom roms. I need it only for root and xposed on Marshmallow. Is there something that can surprise me?

Hi,
"OK, now if we have recovery, is it possible to dump rooted system and pack it to .tot file for people who don't want to lose warranty? "
Ohh, thats sounds nice if this realy possible.
i love my v10.

orbitandre said:
hi,
"ok, now if we have recovery, is it possible to dump rooted system and pack it to .tot file for people who don't want to lose warranty? "
ohh, thats sounds nice if this realy possible.
i love my v10.
Click to expand...
Click to collapse
+1 ??

cyvr1 said:
As root is now possible has anyone tried to install xposed on th H960A?
I'm wondering if the second screen fix for the Telekom V10 also works with the H960A.
What about Viper4Android and AdAway?
Click to expand...
Click to collapse
Didn't try xposed but I think it should work (if it's working on other V10 models - they are not that different). I just recently bought V10 and was disappointed in dpi, so I needed root to patch second screen to be dpi-independent.
Also: why would you want things like Viper4Android when you got really good sounding hifi dac onboard?
fixxxer102 said:
Are there any other known issues? I don`t need to install any custom roms. I need it only for root and xposed on Marshmallow. Is there something that can surprise me?
Click to expand...
Click to collapse
For sure it's enough to flash packages and get root. Xposed is independent from recovery so I can't say anything about that.
Testing are up to you guys. Don't be afraid as this phone is not easy to brick.

rudi666 said:
Also: why would you want things like Viper4Android when you got really good sounding hifi dac on board?
Click to expand...
Click to collapse
Quite simple answer. The onboard Hifi DAC only works with cable headphones. Viper4Android also supports Bluetooth devices.

rudi666 said:
I just recently bought V10 and was disappointed in dpi, so I needed root to patch second screen to be dpi-independent.
Click to expand...
Click to collapse
Could you write a small guide about the dpi change (I prefer 540-580)?
Thanks in advance.

cyvr1 said:
Quite simple answer. The onboard Hifi DAC only works with cable headphones. Viper4Android also supports Bluetooth devices.
Click to expand...
Click to collapse
Ah, you are right, that makes perfect sense. Sorry, I forgot about that.
paschalism said:
Could you write a small guide about the dpi change (I prefer 540-580)?
Click to expand...
Click to collapse
There is still a long way, right now second screen FCs are fixed, but layouts are still wrong. I don't know if I can fix it to be truly dpi-independent but I think 560 is optimal value for this screen.

Is this working with
H960a
V20a-AME-xx??

1k views and only 11 "thanks"??? Really? Guys! We need support devs! Big THANK YOU for ur hard work @rudi666. I haven't try ur method yet but I am happy with the fact that something is beginning to happen with v10
Wysłane z mojego LG-H960 przy użyciu Tapatalka

asmoroth said:
I haven't try ur method yet but I am happy with the fact that something is beginning to happen with v10
Click to expand...
Click to collapse
I did try his method and it worked like a charm. Ok, you'll have to reflash TWRP if you want to use it but I'm sure it's just a matter of time until we have permanent TWRP like th T-Mobile V10 obviously has.
Thanks to rudi666 I have root, xposed, adaway and viper4audio up and running on my V10. And as there are no interesting custom roms to flash in my opinion it does not matter that I'd need to reflash TWRP. If you plan your flashing in advance you can flash all zip files in one go. No real need for TWRP afterwards.

Thanks guys. Unfortunately I see there is not much going on in V10 scene, and it's a shame.
cyvr1 said:
Ok, you'll have to reflash TWRP if you want to use it but I'm sure it's just a matter of time until we have permanent TWRP like th T-Mobile V10 obviously has.
Click to expand...
Click to collapse
Hm.. if you follow instructions you should get permanent TWRP, just try "adb reboot recovery" to test it if you don't want to risk clearing data when using button combination. There is a file called /system/boot-from-recovery.p which is 'restoring recovery' on every boot (that's why there is an info in instruction about not rebooting your phone the first time), but after all the steps this file will be patched. I don't remember if the first use of TWRP or flashing SuperSU does it, but you should get permanent recovery. If not you can always rename this file manually.

rudi666 said:
Hm.. if you follow instructions you should get permanent TWRP, just try "adb reboot recovery" to test it if you don't want to risk clearing data when using button combination. There is a file called /system/boot-from-recovery.p which is 'restoring recovery' on every boot (that's why there is an info in instruction about not rebooting your phone the first time), but after all the steps this file will be patched. I don't remember if the first use of TWRP or flashing SuperSU does it, but you should get permanent recovery. If not you can always rename this file manually.
Click to expand...
Click to collapse
Hi,
I will try that again and see if I can get permanent TWRP. But as I said currently there is no real requirement for that. I flashed SuperSU and both files for xposed when I first booted into recovery and that is all I need at the moment.

i cant enter bootloader
h960A
after adb reboot booloader it keeb restart to soft

[ROOT] J7 prime - CF AUTO ROOT [ SM-G610F - SM-G610M]

Here we have root for stock rom Thanks to the Chainfire Team.
Everything done by them so all thanks and credits are for them
Download
https://download.chainfire.eu/1036/CF-Root/CF-Auto-Root/CF-Auto-Root-on7xelte-on7xeltedd-smg610f.zip
Installation
-Enable USB debugging and OEM unlocking in the settings
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue
-Flash the CF-Auto-Root package as AP in ODIN(Comes within the zip file), and your device should reboot into a modified recovery (signified by a large red Android logo) and it will install SuperSU for you and restore the stock recovery, and reboot back into Android.
I tested it on my device and it worked normally
I will not be responsible for any damage to your device, but following the steps will normally work normally
I just tested with ROM stock 6.0.1 with security patch from 1 July 2017
.

Hayleyw2 said:
Here we have root for stock rom Thanks to the Chainfire Team.
Everything done by them so all thanks and credits are for them
Download
https://download.chainfire.eu/1036/CF-Root/CF-Auto-Root/CF-Auto-Root-on7xelte-on7xeltedd-smg610f.zip
Installation
-Enable USB debugging and OEM unlocking in the settings
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue
-Flash the CF-Auto-Root package as AP in ODIN(Comes within the zip file), and your device should reboot into a modified recovery (signified by a large red Android logo) and it will install SuperSU for you and restore the stock recovery, and reboot back into Android.
I tested it on my device and it worked normally
I will not be responsible for any damage to your device, but following the steps will normally work normally
I just tested with ROM stock 6.0.1 with security patch from 1 July 2017
.
Click to expand...
Click to collapse
Hi will it work for version 7.0 also

it's working fine for me
i have "G610FDDU1BRF2" with android version 7.0 and it gets installed successfully
thanks

How to change Supersu with Magisk?

Razortm said:
it's working fine for me
i have "G610FDDU1BRF2" with android version 7.0 and it gets installed successfully
thanks
Click to expand...
Click to collapse
How to restore stock recovery

Ryan.XM said:
How to restore stock recovery
Click to expand...
Click to collapse
Flash the cf auto root and it will automatically change your recovery into stock.

bjpp21 said:
Flash the cf auto root and it will automatically change your recovery into stock.
Click to expand...
Click to collapse
Ok thanks

I have J7 prime [SM-G610F] with stock andriod 8.1, samsung experience 9.5 and 1 November 2018 security patch will it still work?

I don't think so. I think the J7 with 8.1 is impossible to root? I can't seem to find an answer on this.

lordbaal19 said:
i don't think so. I think the j7 with 8.1 is impossible to root? I can't seem to find an answer on this.
Click to expand...
Click to collapse
its not impossible to root j7 on oreo..just search here in xda and you will find the impossible is really possible.

Well the TWRP thread has no real answers and this method doesn't work either.

I have done it
LordBaal19 said:
Well the TWRP thread has no real answers and this method doesn't work either.
Click to expand...
Click to collapse
yes, I have made root in my SM-G610m with Android 8.1 and it was with TWRP, and I have learned it from YouTube and in Spanish language.
For now I do not have available Super User. I think this post will work for me

ernestoi said:
yes, I have made root in my SM-G610m with Android 8.1 and it was with TWRP, and I have learned it from YouTube and in Spanish language.
For now I do not have available Super User. I think this post will work for me
Click to expand...
Click to collapse
Found a way:
LordBaal19 said:
Which one do you recommend? At which point do I have to install it and then I don't need to install no-verity-opt-encrypt-6.0?
EDIT: I think I finally got it. I did it like this:
1. Ok, so the phone as a fresh 8.1.0 system (just flashed the 7.0 and then it updated OTA in a matter of minutes). I enter the phone, enable the developer mode, enable OEM Unlocking and USB Debug.
2. Then I put the phone on download mode, flash the TWRP recovery disabling the auto-reboot on Odin so it doesn't boot to system automatically. This seem important since otherwise the recovery goes back to stock.
3. Then, to get out of download mode I press vol. down and power keys at the same time and the phone turn off. Then I turn on the phone into recovery mode, once in there I swipe into write mode and go to Wipe and select Format Data, type down yes and it says it's done. I go back to TWRP main menu.
4. I connect the cellphone to the PC and in storage I select Mount USB. Then drag the Magisk-v18.0.zip file into the storage that pops up on Windows. Then I saftely remove the device in Windows and go back to the main TWRP menu on the phone. I select Install and install the .zip file without selecting Signature verification or Reboot after is complete. It says is done installing and no errors seems to occur. I employ the button to wipe Cache and Dalvik.
5. I go back again o Wipe and select Format Data, type down yes and it says it's done, again.
5. Then I try to reboot to System, and choose to Do Not Install the TWRP app, and... SUCCESS!! The phone starts again, I config everything and then Magisk is there in the apps. I tried with an app that requires SU and it works!
Thanks for the help.
Click to expand...
Click to collapse
For the files and details check the OP on that thread.

LordBaal19 said:
Found a way:
For the files and details check the OP on that thread.
Click to expand...
Click to collapse
That's the way I have done it. But if you go on Z3X, select the device (SM-G610M), and you perform some activity like repair IMEI, Z3X detects the root, but it does not detect the Super User.

[ROM] TMO Z2 Force 27.1.3 FlashAll (October 2018 Version)

UPDATE 11-9-18: I have updated the FlashAll with the October edition of version 27.1.3. Yes, they updated the ROM but kept the same version number lol.
This is a TMO Z2 Force 27.1.3 FlashAll. It does not wipe user data. I created it because the OTA update wouldn't complete, I think because I am rooted. Anyway I took the OTA from https://mirrors.lolinet.com (thank you!), unzipped it, used root junky's script to convert it (thank you!) and made a batch file to flash the partitions. The flashall includes ADB and Fastboot also. The Flashall is for windows. Your bootloader needs to be unlocked. You need to be on an OREO rom already.
Disclaimer: Flash at your own risk. Not responsible for damages if this stuff goes south. If you don't know what a flashall is, or twrp, or fastboot, you may not be ready for this.
Downloads
1. Updated October Flashall https://drive.google.com/open?id=1PczvmaVv19c91iOGhpNmhmfKyvDkz-ob (download to your computer)
2. TWRP Installer (if you are rooted, download this to your phone) https://dl.twrp.me/nash/
3. Magisk (if you are rooted, download this to your phone) https://forum.xda-developers.com/apps/magisk
How To:
Unzip the Flashall into a folder called "TMO Moto z2 force 27.1.3 flashall" Open a command prompt in the folder it created. Connect your phone to your computer via ADB.
Not Rooted?
If you are NOT rooted, just run flashall.bat. It will automatically boot into fastboot mode, update the partitions, reboot, and profit. This does not wipe user data.
Rooted
If you are rooted:
1) run flashall_then_recovery.bat. It will automatically boot into fastboot mode, update the partitions, then automatically reboot into a temp twrp recovery.
2) In TWRP install the twrp installer you downloaded above (if you use recovery).
3) Reboot recovery
4) Install magisk that you downloaded above.
5) Reboot
Not Rooted and want to wipe everything?
Run flashall_erase.bat. It will boot into fastboot mode, update the partitions, and wipe everything.
If this helps you please hit the "Thanks" button. Reply to this post if you have questions or need any assistance.

texasaggie1 said:
This is a TMO Z2 Force 27.1.3 FlashAll. It does not wipe user data. I created it because the OTA update wouldn't complete, I think because I am rooted. Anyway I took the OTA from @xiyl (thank you!), unzipped it and made a batch file to flash the partitions. The flashall includes ADB and Fastboot also. The Flashall is for windows. Your bootloader needs to be unlocked. You need to be on an OREO rom already.
Disclaimer: Flash at your own risk. Not responsible for damages if this stuff goes south.
Downloads
1. Flashall https://drive.google.com/open?id=1HK2zssCGlPTD5m2A_SAD-RjrQDfmZMTR (download to your computer)
2. TWRP Installer (if you are rooted, download this to your phone) https://dl.twrp.me/nash/
3. Magisk (if you are rooted, download this to your phone) https://forum.xda-developers.com/apps/magisk
How To:
Unzip the Flashall. It will create a folder called "NASH_TMO_27.1.3" Open a command prompt in the folder it created.
Not Rooted?
If you are NOT rooted, just run flashall.bat. It will automatically boot into fastboot mode, update the partitions, reboot, and profit.
Rooted
If you are rooted:
1) run flashall_then_recovery.bat. It will automatically boot into fastboot mode, update the partitions, then automatically reboot into a temp twrp recovery.
2) In TWRP install the twrp installer you downloaded above
3) Reboot recovery
4) Install magisk that you downloaded above.
5) Reboot
If this helps you please hit the "Thanks" button. Reply to this post if you have questions or need any assistance,
Click to expand...
Click to collapse
the "flashal link" contains only TWRP3.1.zip with boot.img and META-INF folder. it doesn't contain a flashall_then_recovery.bat nor NASH_TMO_27.1.3.

kendallgreen said:
the "flashal link" contains only TWRP3.1.zip with boot.img and META-INF folder. it doesn't contain a flashall_then_recovery.bat nor NASH_TMO_27.1.3.
Click to expand...
Click to collapse
Sorry! It was late and I linked to the wrong thing. ? Try it now please.

texasaggie1 said:
This is a TMO Z2 Force 27.1.3 FlashAll. It does not wipe user data. I created it because the OTA update wouldn't complete, I think because I am rooted. Anyway I took the OTA from @xiyl (thank you!), unzipped it and made a batch file to flash the partitions. The flashall includes ADB and Fastboot also. The Flashall is for windows. Your bootloader needs to be unlocked. You need to be on an OREO rom already.
Disclaimer: Flash at your own risk. Not responsible for damages if this stuff goes south. If you don't know what a flashall is, or twrp, or fastboot, you may not be ready for this.
Downloads
1. Flashall https://drive.google.com/file/d/1JKu5S7xvy8xvyCodLEt7olr8czP_8FUm/view?usp=drivesdk (download to your computer)
2. TWRP Installer (if you are rooted, download this to your phone) https://dl.twrp.me/nash/
3. Magisk (if you are rooted, download this to your phone) https://forum.xda-developers.com/apps/magisk
How To:
Unzip the Flashall. It will create a folder called "NASH_TMO_27.1.3" Open a command prompt in the folder it created.
Not Rooted?
If you are NOT rooted, just run flashall.bat. It will automatically boot into fastboot mode, update the partitions, reboot, and profit.
Rooted
If you are rooted:
1) run flashall_then_recovery.bat. It will automatically boot into fastboot mode, update the partitions, then automatically reboot into a temp twrp recovery.
2) In TWRP install the twrp installer you downloaded above
3) Reboot recovery
4) Install magisk that you downloaded above.
5) Reboot
If this helps you please hit the "Thanks" button. Reply to this post if you have questions or need any assistance.
Click to expand...
Click to collapse
I downloaded and unzipped the new NASH_TMO_27.1..3. I added the AdbWinApi.dll and AdbWinUsbApi.dll and got the flashall_then_recovery.bat to run. I didn't install the TWRP installer or Magisk but rebooted to recovery and then system. After several restarts due to unlocked bootloader warning, it came back to build number OCXS27.1.2 kernel [email protected]#1 Fri Apr 20 09:21:27 CDT 2018. Android security level May 1, 2018. Android version 8.0.0 However, all of my apps were retained except Messaging .

kendallgreen said:
the "flashal link" contains only TWRP3.1.zip with boot.img and META-INF folder. it doesn't contain a flashall_then_recovery.bat nor NASH_TMO_27.1.3.
Click to expand...
Click to collapse
kendallgreen said:
I downloaded and unzipped the new NASH_TMO_27.1..3. I added the AdbWinApi.dll and AdbWinUsbApi.dll and got the flashall_then_recovery.bat to run. I didn't install the TWRP installer or Magisk but rebooted to recovery and then system. After several restarts due to unlocked bootloader warning, it came back to build number OCXS27.1.2 kernel [email protected]#1 Fri Apr 20 09:21:27 CDT 2018. Android security level May 1, 2018. Android version 8.0.0 However, all of my apps were retained except Messaging .
Click to expand...
Click to collapse
So try it again but this time just do the regular flashall.bat. it should work this time.
It sounds like you are installing this to slot a but your phone is running in slot b. If doing it this way doesn't fix it just look on here for the command to switch your phone from one slot to another.

success. I tried the flashall.bat and got the system updated to 27.1.3. I noticed that when I fastboot --set-active=_a, I had 27.1.2 and with --set-active=_b, I had to restart the phone because it was stuck at the unlocked bootloader warning. thanks.

kendallgreen said:
success. I tried the flashall.bat and got the system updated to 27.1.3. I noticed that when I fastboot --set-active=_a, I had 27.1.2 and with --set-active=_b, I had to restart the phone because it was stuck at the unlocked bootloader warning. thanks.
Click to expand...
Click to collapse
awesome! The whole a/b partition thing can be quite annoying

great job man glad someone did this i was about to try thanks

worked great but i reflashed remove encryption oreo also i didnt know if it was a necessary was being safe you made it easy no fastboot lol great work

My Fellow Texan.....
THANK YOU.
My phone has been in a weird limbo for months. I was on AOSIP ROM but it wasn't rooted, I couldn't use any moto mods and I couldn't install anything because TWRP wasn't installed and it wouldn't let me install it, either. I now have TWRP, but it's showing no baseband. So I'm gonna attempt to fix that but I'm already in a better place than I was. Thanks again, brother.

if you need baseband its easy to fix i had the same issues i was testing kernel its eas fix if you need i can help fix ive bricked and tried everything works easy check last post put on this https://forum.xda-developers.com/z2-force/development/pantheon-kernel-alpha-t3805977

My Tmo box is rooted, presently running the original 27.1 release.. I've been getting the OTA update notifications for 27.1.2.
Do we know if I can skip 27.1.2 and jump straight to the 27.1.3 release? I'd love to be able to do this flash-all and put the update notifications to bed for a while.

dismembered3po said:
My Tmo box is rooted, presently running the original 27.1 release.. I've been getting the OTA update notifications for 27.1.2.
Do we know if I can skip 27.1.2 and jump straight to the 27.1.3 release? I'd love to be able to do this flash-all and put the update notifications to bed for a while.
Click to expand...
Click to collapse
It should be fine to skip revisions.

StonedYoda said:
My Fellow Texan.....
THANK YOU.
My phone has been in a weird limbo for months. I was on AOSIP ROM but it wasn't rooted, I couldn't use any moto mods and I couldn't install anything because TWRP wasn't installed and it wouldn't let me install it, either. I now have TWRP, but it's showing no baseband. So I'm gonna attempt to fix that but I'm already in a better place than I was. Thanks again, brother.
Click to expand...
Click to collapse
If you are on tmobile, flashing the firmware flashall from the aosip thread to get baseband back.

mookiexl said:
If you are on tmobile, flashing the firmware flashall from the aosip thread to get baseband back.
Click to expand...
Click to collapse
If that doesn't work let me know. It should though. You may have to re-root after his suggestion

I'd been avoiding updates because I just didn't want to deal with rooting again and restoring data, etc. This was great!

(bootloader) slot: not found this is what I get with every fastboot command.

I was having the same issue... I was on 27.1.2 and kept getting notified to update, but it kept failing. I'm rooting with Magisk (16.0 initially but then up to 17.1) and it wouldn't update. Thanks to this thread, I ran the flashall_then_recovery.bat and it worked a treat!!! Thank you TexasAggie!

TWRP Installer link is down
The link to the TWRP installer is timing out when loading and comes up with an error message. Is it possible to install the 27.3 update using adb and then flash magisk in the temp twrp? Thanks for your work bro!
UPDATE:
I tried and now I'm stuck in bootloop. I can still get to twrp using adb and did a wipe but it's still stuck in loop land. Do I need to be rebooting in TWRP from slot A or B? This is my first phone that has dual partitions and I am a bit confused by it. Any suggestions? THANK YOU!!
UPDATE:
Tried your flashall update a second time and it worked with no bootloop issue, was able to flash magisk and obtain root again too.

climbhigh77 said:
The link to the TWRP installer is timing out when loading and comes up with an error message. Is it possible to install the 27.3 update using adb and then flash magisk in the temp twrp? Thanks for your work bro!
UPDATE:
I tried and now I'm stuck in bootloop. I can still get to twrp using adb and did a wipe but it's still stuck in loop land. Do I need to be rebooting in TWRP from slot A or B? This is my first phone that has dual partitions and I am a bit confused by it. Any suggestions? THANK YOU!!
UPDATE:
Tried your flashall update a second time and it worked with no bootloop issue, was able to flash magisk and obtain root again too.
Click to expand...
Click to collapse
Glad to hear that!

How To Guide [TWRP] MI 11 (Pro/Ultra) (mars/star)

[TWRP] MI 11 (Pro/Ultra) (mars/star)​
WARNING : I do not know who made this TWRP and I am NOT taking credit for it. It was posted on eu site and I'm just sharing since there was no thread for twrp here on xda.
INSTRUCTIONS
1. Before starting the process, the bootloader must be unlocked.
2. Install Xiaomi USB drivers.
3. Enable Usb debugging from Settings - Additional settings - developer options.
4. Download TWRP for Mi 11 (Pro/Ultra) , and put it in your fastboot folder.
5. Put your phone into fastboot mode.
6. Rename downloaded file to "twrp.img".
7. Do the following command. It will automatically boot into TWRP.
Code:
fastboot boot twrp.img
8. If you get a screen asking for a pin, press 2nd option
and change language to English then enter phone pin.
9. Change language to English (press the 6th option).
10. Go to "Advanced" and select "Onekey inject TWRP".
11. Swipe to inject the TWRP. It might take a few minutes, so don't worry.
Note
1) Don't change the boot slot, currently (Slot A) for most or your device will not boot at all.
2) For user experiencing decrypt issue, you can try one of the methods below to enable decryption:
a. Remove all your security eg. fingerprint, face unlock, pattern and leave ONLY pin. Reboot to twrp and try again.
b. Reflash twrp.
c. LAST RESORT! Format data and factory reset your device then reflash twrp.
3. For user experiencing decrypt issue but just want to flash latest build:
a. Boot to twrp > mount > mount usb storage then transfer your rom.zip to data/media/0
b. Now go to install and look for rom.zip under data/media/0. Profit!
4. The decrypt issue was a bug on the Chinese twrp, no update since may so don't ask for an ETA.
CHANGELOGS
07/18/21
1) Additional instruction from scratch.
2) Additional note for people having decrypt issue.
CTTO: xiaomi.eu, hoangsang

Is the legit TWRP ?? Xiaomi.EU getting ready to push updates via TWRP? :'D

skylerfly16 said:
Is the legit TWRP ?? Xiaomi.EU getting ready to push updates via TWRP? :'D
Click to expand...
Click to collapse
Yes, They just did the new stable in TWRP Format.

The Chinese exe worked for me this morning but after I installed it the phone didn't want to boot and I got stuck in twrp for awhile

speedtripler said:
The Chinese exe worked for me this morning but after I installed it the phone didn't want to boot and I got stuck in twrp for awhile
Click to expand...
Click to collapse
Why did you install the Chinese exe?

skylerfly16 said:
Why did you install the Chinese exe?
Click to expand...
Click to collapse
The official one hadn't been released yet and I like a challenge sometimes

Hey, thx for bringing this to my attention, but i checked... root-access is gone... :/

deleted post

I keep getting a " no such partician " fail msg , what am I doing wrong here?

speedtripler said:
I keep getting a " no such partician " fail msg , what am I doing wrong here?
Click to expand...
Click to collapse
Your device is not connected, hence the empty list after adb devices.
Did you enable USB debugging in Developer options?

heinhuiz said:
Your device is not connected, hence the empty list after adb devices.
Did you enable USB debugging in Developer options?
Click to expand...
Click to collapse
Thx It's ok,I got it after a few attempts
The language on twrp still opens on Chinese and it needs changed to English each time but apart from that it seems to work fine!

SanHelios said:
Hey, thx for bringing this to my attention, but i checked... root-access is gone... :/
Click to expand...
Click to collapse
mine was revoked after i flash the latest stable, just download magisk23.apk then rename it to magisk23.zip and flash thru twrp, got my root back that way, cheers

innocence07 said:
mine was revoked after i flash the latest stable, just download magisk23.apk then rename it to magisk23.zip and flash thru twrp, got my root back that way, cheers
Click to expand...
Click to collapse
Is banking and payment apps still working?
Can you still pass safetynet check?

speedtripler said:
Is banking and payment apps still working?
Can you still pass safetynet check?
Click to expand...
Click to collapse
Yes and yes

Thanks, it works for me.
But each time i boot on TWRP, go back to chinesse language.
Can we do backup ? (and what can we backup) in case of something wrong in the future

sabrewulf said:
Thanks, it works for me.
But each time i boot on TWRP, go back to chinesse language.
Can we do backup ? (and what can we backup) in case of something wrong in the future
Click to expand...
Click to collapse
The recovery is fully functional as far as I can tell...
I did a complete backup successfully but I haven't tried to restore it yet

You click on everything ?

Hi,
after a long day of learning the hard way (got stuck in Fastboot Loop) I am now on stable EU 12.5.7 (MI11 Ultra, EU phone). So far so good, but I was wondering, how can I make TWRP stuck to the phone, meaning, when I push the power button to have an option like: Boot into TWRP. Is that possible or is there a "click this button with this... trick"?
ATM, I can only get TWRP to work, when I enable it via PC, which is not good.
I am asking, because I have an old Oneplus 6, which has this option. TWRP is installed and I can boot directly to it, if I want to.
Can you please help me out? Is there a trick or am I doing something wrong?
Greetings from Germany
Placebo

I believe you are on custom EU rom right? Just reboot into recovery, custom eu rom injects twrp as standard recovery

Hi, yes I am and I did that also. But still can't boot into TWRP from within the phone. Is there a trick after the injection?