Related
I unlocked my bootloader, installed twrp and several roms to try them out, then decided to go back to stock. Currently have OOS 3.5.4 installed with stock recovery (that came with the toolkit). However, whenever I try to lock the booltloader again, the phone won't boot up. It will bootloop, or just stay off with the led glowing white. I tried to sideload the stock ROM from OnePlus, but it fails after about 45% completion. I tried both 3.5.3 and 3.5.4 and both fail after about 45%. The only way to get the phone to boot again is by unlocking the bootloader again, then it boots just fine. Tried unlocking with the toolkit as well as fastboot oem lock. Both give me the prompt on the phone, then wipe the phone and go into the bootloop.
Any suggestions on how to re-lock the bootloader? I want to be able to get the OTA update, which I think will fail with an unlocked bootloader. Note, I have also tried loading the Nougat update from settings - system update - local upgade (both full and update) and they also fail to load shortly after booting to recovery.
Thanks,
TR
Instead of using the toolkit, try just doing it manually.
fastboot oem lock IS the correct way to lock the bootloader.
If you're running into all those issues, try to reflash the stock rom from the official site. OR try this
NOTE: This WILL wipe everything on your phone so make a backup first!
First Unlock booloader1. On your phone go into Developer screen (Settings --> Developer Options)
If you don't have this go back to Settings --> About Device. Tap "Build number" 7-10 times to unlok developer options
2. In Developer Options turn on "USB Debugging" and "OEM Unlock"
3. Open ADB in command prompt and go to the directory where ADB is.
Type adb reboot bootloader
4. Once your device is in fastboot mode, type in fastboot devices to make sure your device is listed
5. Type in fastboot oem unlock to unlock your device bootloader
You can check to make sure it was properly unlocked by typing in fastboot oem device-info.
6. Reboot into your system
Files we need7. Download the following files:
TWRP - https://build.nethunter.com/test-builds/twrp/oneplus/twrp-3.0.2-0-oneplus3t.img
No-verity-opt-encrypt - https://build.nethunter.com/android-tools/no-verity-opt-encrypt/no-verity-opt-encrypt-5.0.zip
Magisk - http://tiny.cc/latestmagisk
Phh-Superuser - https://forum.xda-developers.com/attachment.php?attachmentid=3988488&d=1483407725
Latest Stable Nougat Rom - http://otafsc.h2os.com/patch/amazon...s3TOxygen_28_OTA_035_all_1612310259_2dc0c.zip
8. Copy all the files to your phone (keep the original on your pc just in case)
9. Load back up to fastboot mode
In ADB type adb reboot bootloader
10. Flash twrp img we downloaded above by typing
fastboot flash recovery twrp-3.0.2-0-oneplus3t.img
11. After this reboot into the system
Install all of our downloaded files through TWRP12. Now boot into recovery by issuing the following ADB command
adb reboot recovery (you should go into TWRP)
13. Once you're in twrp flash the "no-verity-opt-encrypt-5.0.zip" file OR you can format the data partition to f2fs to prevent the dm-verity error.
14. Now install the stock stable nougat rom we downloaded above
15. Do a factory system wipe / cache & dalvik
16. Install magisk through TWRP
17. Wipe cache/dalvik
18. Install phh SuperUser
19. Now reboot into the system normally.
NOTE: This *COULD* take a while since you did a clean install of nougat so just be patient and you should be good to go after this.
Thanks for the reply.
I did do fastboot oem lock, and it results in an unbootable system. fastboot oem unlock makes it bootable again. Not sure why. Also, whenever I do adb sideload <any_rom> it fails after about 45%. Not sure what's happening. Your instructions would get me to Nougat with TWRP and an unlocked bootloader, which may be what I end up doing, but I was trying to get back to fully stock, and locked again, so that OTA's will work properly. If nothing else works, I will go the route you suggest above.
Thanks again!
I just figured I'd try to get you to a working system/phone. After you get all that working you can probably lock your bootloader back to default. Now, I'm not 100% sure, but I believe that if you have a custom recovery you will need to restore that to stock as well before setting the bootloader back to locked.
TXRangerXDA said:
I unlocked my bootloader, installed twrp and several roms to try them out, then decided to go back to stock. Currently have OOS 3.5.4 installed with stock recovery (that came with the toolkit). However, whenever I try to lock the booltloader again, the phone won't boot up. It will bootloop, or just stay off with the led glowing white. I tried to sideload the stock ROM from OnePlus, but it fails after about 45% completion. I tried both 3.5.3 and 3.5.4 and both fail after about 45%. The only way to get the phone to boot again is by unlocking the bootloader again, then it boots just fine. Tried unlocking with the toolkit as well as fastboot oem lock. Both give me the prompt on the phone, then wipe the phone and go into the bootloop.
Any suggestions on how to re-lock the bootloader? I want to be able to get the OTA update, which I think will fail with an unlocked bootloader. Note, I have also tried loading the Nougat update from settings - system update - local upgade (both full and update) and they also fail to load shortly after booting to recovery.
Thanks,
TR
Click to expand...
Click to collapse
I also have the same problem, after the bootloader lock the phone does not start.
I tried with all the possible procedures, also even the rom flash in local and sideload it does not work, It comes to 45% and then fails.
we will highlight the problem, so everyone will know and maybe there is a solution
m0d hipp¥ said:
I just figured I'd try to get you to a working system/phone. After you get all that working you can probably lock your bootloader back to default. Now, I'm not 100% sure, but I believe that if you have a custom recovery you will need to restore that to stock as well before setting the bootloader back to locked.
Click to expand...
Click to collapse
But of course, you can't relock phone with a non standard recovery. Replace TWRP with the ROMs real recovery and relock will work again.
That's what I figured. Thanks for the confirmation.
Use the unbrick tutorial to go back to stock
This is what i did
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
pitrus- said:
But of course, you can't relock phone with a non standard recovery. Replace TWRP with the ROMs real recovery and relock will work again.
Click to expand...
Click to collapse
I'm sorry, even with the stock recovery but does not work, it was the first thing I did
You can a unbick tutorial. It worked for my OnePlus 3T. Just search up How to unbrick (whatever OnePlus device you have) on Google. Then follow all the instructions carefully. If you need help with it I could try to do a remote session with you. Edit: It will erase all data and you will boot with oos 3.5.3 ( I also had the same issue as you. But I couldn't install any zip with stock recovery or adb side load.
Haven't seen nothing on the fórum about this particular subject, locking the bootloader seems a problem in this phone
enokack said:
Haven't seen nothing on the fórum about this particular subject, locking the bootloader seems a problem in this phone
Click to expand...
Click to collapse
Only if you have modified the phone in some way or another (like rooting and installing twrp) before trying to re-lock.
If you keep it stock, you should be able to re-lock. Or else, just use the Qualcomm restore method to re-lock.
tried this
OK what i did was when the phone was starting and vibrating I push the power bottom and volume down bottom at the same time ,then i connected the phone to the PC,from the panel in the phone there are 3 categories to erase everything on the phone I did it all(1,2,3) and then I put the phone in ADB mode from the control panel in the phone,After that I flash via fastboot the original .zip from one plus for the version 4.0.3 (1.4 GB) ,when it finished I restarted and the phone started normal again,I hope this help someone alse,I was so desesperated:silly:.
I think the problem in re-locking it is the modified boot image. Locked bootloaders don't support those.
re-locking bootloader will getback the warranty ???
No solutions till now
enokack said:
Haven't seen nothing on the fórum about this particular subject, locking the bootloader seems a problem in this phone
Click to expand...
Click to collapse
Its three easy steps, no need to use any toolkit just follow the instructions. https://forums.oneplus.net/threads/...-3-3t-and-go-back-completely-to-stock.456232/
Abrar123 said:
re-locking bootloader will getback the warranty ???
Click to expand...
Click to collapse
Unlocking the bootloader does not void the warranty on this device:
https://oneplus.net/support/answer/will-rooting-or-unlocking-the-bootloader-void-my-warranty
Once I have root, is there a command to re-lock and later eventually unlock the bootloader again?
I remember this was possible with google nexus devices, there was a shell command (require root) that was able to change bootloader status
Hello,
I am new to this forum, but have done a bit of unlocking and installing custom roms on other phones (mostly OPO's, both my old one and friends). But this new OP 3T I just got is giving me some troubles I have not encountered before. I would LOVE to put this into the correct forum, but of course with my being new to this forum...rules...
I am following the standard install over on the TWRP site and on the OP3T, the install finishes and then I reboot and I get a screen that says:
"Your device has been unlocked and can't be trusted. If you don't want to see this screen, please lock your device by "fastboot oem lock" an erase userdata..."
I have never seen this before. Can someone give me a idea what could be going on here? Do I need to re-lock it? What did OP do to their phones!!?!
Oh and also, I am planning on installing LineageOS. Any reason I shouldn't?
Thanks!
Blenderite said:
Hello,
I am new to this forum, but have done a bit of unlocking and installing custom roms on other phones (mostly OPO's, both my old one and friends). But this new OP 3T I just got is giving me some troubles I have not encountered before. I would LOVE to put this into the correct forum, but of course with my being new to this forum...rules...
I am following the standard install over on the TWRP site and on the OP3T, the install finishes and then I reboot and I get a screen that says:
"Your device has been unlocked and can't be trusted. If you don't want to see this screen, please lock your device by "fastboot oem lock" an erase userdata..."
I have never seen this before. Can someone give me a idea what could be going on here? Do I need to re-lock it? What did OP do to their phones!!?!
Oh and also, I am planning on installing LineageOS. Any reason I shouldn't?
Thanks!
Click to expand...
Click to collapse
Is nothing wrong with your device ..What you get is a warning that your bootloader is unlocked ...
You gonna get this every time you want to boot to your ROM or to twrp....
You can proceed further to install any ROM that you like...
I think you can find a guide on XDA forums to disable this warning if you want...
cultofluna said:
Is nothing wrong with your device ..What you get is a warning that your bootloader is unlocked ...
You gonna get this every time you want to boot to your ROM or to twrp....
You can proceed further to install any ROM that you like...
I think you can find a guide on XDA forums to disable this warning if you want...
Click to expand...
Click to collapse
Ok I tried that and a new problem came up!! When I try to reboot into recovery, I do not get TWRP, but the stock recovery that was there originally! Unless they have completely changed the look of TWRP. I will try to upload a picture of it if that helps.
You can't get rid of the bootloader-unlocked warning without re-locking your bootloader, which you really should not do while you have a custom recovery installed.
Are you sure you've flashed TWRP and not just booted it it from a local file on your computer? Try using fastboot to wipe recovery first before flashing TWRP.
Anova's Origin said:
You can't get rid of the bootloader-unlocked warning without re-locking your bootloader, which you really should not do while you have a custom recovery installed.
Are you sure you've flashed TWRP and not just booted it it from a local file on your computer? Try using fastboot to wipe recovery first before flashing TWRP.
Click to expand...
Click to collapse
I followed the Fastboot method on this page (rules won't let me post the link normally): twrp. me/devices/oneplus3t.html
Blenderite said:
I followed the Fastboot method on this page (rules won't let me post the link normally): twrp. me/devices/oneplus3t.html
Click to expand...
Click to collapse
Right on that page (last paragraph of fastboot install method), you will see:
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
I had a heck of a time with this myself (even reading the above). Even rebooting (after flash TWRP) to recovery (power+vol down), the TWRP install would still not "stick". Had to try multiple times. I also rooted with SuperSU 2.79 at some point in that process, which may or may not have helped TWRP to finally "stick".
redpoint73 said:
Right on that page (last paragraph of fastboot install method), you will see:
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
I had a heck of a time with this myself (even reading the above). Even rebooting (after flash TWRP) to recovery (power+vol down), the TWRP install would still not "stick". Had to try multiple times. I also rooted with SuperSU 2.79 at some point in that process, which may or may not have helped TWRP to finally "stick".
Click to expand...
Click to collapse
I tried this once before, but after your suggestion to try it several times, it finally worked! Thanks!!
Flash TWRP, reboot, press the volume down key before the phone boots, go into recovery, you should see TWRP flash screen, that usually works but I'm glad you got it going
Hello,
I tried the latest V11.0.6.0.QFAEUXM ROM but I didn't like it and so I booted into my TWRP recovery and restored the latest fullbackup I made from 2 days ago, then rebooted.
Now I'm stuck in Fastboot loop.
$ fastboot reboot
and
$ fastboot reboot recovery
... have literally no effect, still the phone is stuck in fastboot mode uppon restart.
I read in another thread "just use MiFlash tool and revert to stock rom, do everything all over to rescue your phone".
OK, fine. I start MiFlash, it asks me to unlock my phone... I click unlock. Nothing happens, I click again "try unlock again", then "no need to repeat unlock" appears, nothing happens, the usual menu with the options to flash or install TWRP are missing.
:good: really good! Just as expected. Very user friendly.
Now what?
I had twrp-3.3.1-37-cepheus-mauronofrio.img (SHA-1: A3230E7918A9E3D3D939AA8619B40E47A54F645D) as recovery and my ROM was xiaomi.eu_multi_MI9_V11.0.4.0.QFACNXM_5e64190eb9_v11-10.zip (SHA-1: 714BD02A5D52720C2733E2FDA9730EECE441AE09) before I tried to flash miui_CEPHEUSEEAGlobal_V11.0.6.0.QFAEUXM_1647340073_10.0.zip (SHA-1: BAC6307DA99F766E35A6EDBB0B74D02F73AD2782) and everything went downhill from there.
MiFlash version: miflash_unlock-en-3.5.719.27.zip
Is there more info I can provide?
EDIT / UPDATE:
I've been following the instructions from a Youtube video (links below) by the letter and now at least I'm back in a sane / stock ROM state where I can (have to) redo everything fromm the beginning.
Sources:
https://www.youtube.com/watch?v=GuAHNFjK--o
Instructions:
https://highonandroid.com/android-s...rick-unroot-xiaomi-android-stuck-on-fastboot/
Download site:
https://xiaomifirmware.com/roms/download-official-miui-roms-for-xiaomi-mi-9/
(I downloaded & used "cepheus_eea_global_images_V10.2.17.0.PFAEUXM_20190327.0000.00_9.0_eea_b2470d1b08.tgz")
I chose "clean all" as flash method in that XiaomiMiFlash Tool.
It will reboot into Stock ROM, in my case I chose the EU version.
From there you can activate Developer Options & USB-Debugging again and you're set to go customizing again.
Ohhh looks not amazing
Did you've tried to flash recovery via adb?
Laptapper said:
Ohhh looks not amazing
Did you've tried to flash recovery via adb?
Click to expand...
Click to collapse
I tried:
$ fastboot flash recovery twrp-3.3.1-37-cepheus-mauronofrio.img
$ fastboot reboot recovery
It boots straight into Fastboot again.
I don't even know what to say at this point. I literally only wanted to restore a fullbackup. How can this possibly happen in the first place?
I'm really close to smashing this phone in 1000 pieces...
anthropaki said:
I tried:
$ fastboot flash recovery twrp-3.3.1-37-cepheus-mauronofrio.img
$ fastboot reboot recovery
It boots straight into Fastboot again.
I don't even know what to say at this point. I literally only wanted to restore a fullbackup. How can this possibly happen in the first place?
I'm really close to smashing this phone in 1000 pieces...
Click to expand...
Click to collapse
What I suggest you to do is flash the latest TWRP from Mauronofrio which is 3.3.1-52.
After successfully flashing the recovery, immediately press vol up + power button until it reboots.
Do not reboot using the command line or turn off your phone.
In TWRP, flash the xiaomi.eu ROM version that your backup is based on.
Then perform a restore from the backup that you had made.
Sent from my MI 9 (Cepheus) using Tapatalk
Thanks, but I fixed it already.
As I described / updated in the OP there is a tool with which you can use some firmware roms in tgz format to flash over the fastboot state to get a "stock rom-ish" state back.
Once in the stock rom you have to go through the basic setup routine and then activate USB Debugging, then you can install TWRP, other Roms as per usual.
Trying to flash TWRp after unlocking bootloader. First time i tried it, said successful but booted to MIUI recovery
2nd time i tried said again successful, booted to TWRP, formatted data.
Phone then wouldnt reboot to TWRP. Instead it going straight to fastboot. I keep trying to flash again, every time saying successful, then it just boots to fastbooot, not recovery. Any ideas, phones dead at the minute
Tones1971 said:
Trying to flash TWRp after unlocking bootloader. First time i tried it, said successful but booted to MIUI recovery
2nd time i tried said again successful, booted to TWRP, formatted data.
Phone then wouldnt reboot to TWRP. Instead it going straight to fastboot. I keep trying to flash again, every time saying successful, then it just boots to fastbooot, not recovery. Any ideas, phones dead at the minute
Click to expand...
Click to collapse
The best way to recover the phone in your situation is to fastboot flash MIUI.
Get the latest MIUI fastboot ROM for your phone from here
https://xiaomifirmwareupdater.com/miui/raphael/
Install it using this guide from the official MIUI forums
https://c.mi.com/oc/miuidownload/detail?guide=2
If you see a blank page on a mobile browser, set it to view in desktop mode, for this page.
Make sure in step 5 you change the option at the bottom of the Mi Flash Tool to 'clean all' before hitting the Flash button.
MIUI will restore stock recovery when it reboots, so you need to do something to fix this. Flashing Magisk or a custom ROM will automatically preserve TWRP.
If you plan to keep MIUI and do not want Magisk, then you need to flash the vbmeta patcher from here
https://forum.xda-developers.com/k2...icial-twrp-xiaomi-redmi-t3944363/post79823568
You need to flash TWRP, then immediately boot into TWRP.
Code:
fastboot flash recovery <path to twrp>
fastboot oem reboot-recovery
At this point you need to flash something in order to preserve TWRP (either a new custom ROM, Magisk, or the vbmeta patcher)
Cheers. You know this is all familiar. Pretty sure i had the same trouble 3 years ago with my mi mix 2
Anyway, lots of hiccups on the way along with this solution. Got to the point now where it says its flashing but it never stops.
EDIT: Bit more research, shortened the path names. Got an error. Commented out device name, got a different error. Switched to USB 2.0 port an FINALLy im back up and running.
Thank you so much for the help.
My phone keeps getting stuck on fastboot mode.
I'll flash the standard MIUI ROM using the MiFlash Tool, then I flash a custom recovery and a custom ROM(EvolutionX in this case), everything works and I can set up my phone, but as soon as I reboot I can no longer boot into android or recovery. i've tried flashing multiple recoveries using fastboot and straight up booting a recovery using "fastboot boot recovery.img" but it still always go to fastboot. The only solution is to start the process all over again, and obviously that's just not an option since I can never turn my phone off after that.
Any tips?
I think I got it solved, at least I got it to reboot into Android and TWRP.
I used this guide, but I'll write the steps I took here in case you're having the same issue. I wound up using xiaomi.eu MIUI rom, but it shouldn't matter what you use, I'll assume you're stuck in fastboot.
Do "fastboot flash vendor vendor.img", you get this vendor.img from the fastboot version of the official MIUI ROM, after you decompress the .tar.gz it should be in the "images" folder
Do "fastboot flash recovery twrp.img" then "fastboot boot twrp.img", this should flash twrp as your recovery and then boot into it, for some reason it only worked with the official twrp, not orange fox.
Assuming you got into TWRP you should now flash the latest firmware(I got mine from xiaomifirmwareupdater.com) make sure you download just the firmware not the entire rom, mine was named something like fw_raphael_miui... .zip
Format data (not wipe, format, it's a separate option in TWRP), it should ask you to type yes, so do that.
Flash whatever ROM you want
Hopefully this helps you, I hate finding forum posts marked "solved" but with no instructions. I also tried the "vbmeta_dv_shivsom.img" method some threads mentioned but it didn't work
Here's a pastebin of the guide I used in case the original link goes down
You can get all the files I mentioned from xiaomifirmwareupdater.com and the official TWRP site
Out of all that, the one instruction that solves it is the format data step. This is the magic step required. You always need to do this when flashing over MIUI.
Flashing vendor was totally irrelevant.
This will tell you what you need to do.
Simple Guide to flashing successfully
Here's a quick guide to some of the basics. Which recovery. ---------------------------- Use the latest from here. https://forum.xda-developers.com/k20-pro/development/recovery-unofficial-twrp-xiaomi-redmi-t3944363/post79823568 Do not use Orange...
forum.xda-developers.com
Thanks a lot man! I'm having this issue and it is beyond annoying. I've lost so much time with this BS.
Edit: Does not help actually
I just had the same problem with my Lamentablet.
I was trying stuff up and restarted it in fastboot mode and got stuck there.
So, ways to deal with it:
adb reboot recovery
rebooted the tablet in recovery mode. All I had then was to press the power button to activate Reboot. Solved! From now on it boots normally.
Meanwhile I had discovered that by typing
fasboot continue
the tablet would resume, but at the next reboot cycle, power down + up cycle or reboot after a crash, the tablet would reboot into fastboot mode...
And I found this out when it crashed (it's not called a Lamentablet for nothing!).
Luckily I had a PC with Linux around. It didn't have the software installed but drivers were already in the Kernel and installing adb and fastboot was a matter of mere seconds. If I didn't have an easily ready PC at hand, this tablet would have become a brick until plugged in and rebooted...
OMG Thanks dude.... I'm literally working to installing custom rom on redmi 7a from stock rom but I don't know what reason that make my phone always stuck on fastboot when format data, before this was fine.
Osga21 said:
I think I got it solved, at least I got it to reboot into Android and TWRP.
I used this guide, but I'll write the steps I took here in case you're having the same issue. I wound up using xiaomi.eu MIUI rom, but it shouldn't matter what you use, I'll assume you're stuck in fastboot.
Do "fastboot flash vendor vendor.img", you get this vendor.img from the fastboot version of the official MIUI ROM, after you decompress the .tar.gz it should be in the "images" folder
Do "fastboot flash recovery twrp.img" then "fastboot boot twrp.img", this should flash twrp as your recovery and then boot into it, for some reason it only worked with the official twrp, not orange fox.
Assuming you got into TWRP you should now flash the latest firmware(I got mine from xiaomifirmwareupdater.com) make sure you download just the firmware not the entire rom, mine was named something like fw_raphael_miui... .zip
Format data (not wipe, format, it's a separate option in TWRP), it should ask you to type yes, so do that.
Flash whatever ROM you want
Hopefully this helps you, I hate finding forum posts marked "solved" but with no instructions. I also tried the "vbmeta_dv_shivsom.img" method some threads mentioned but it didn't work
Here's a pastebin of the guide I used in case the original link goes down
You can get all the files I mentioned from xiaomifirmwareupdater.com and the official TWRP site
Click to expand...
Click to collapse
thanks bro. flashing vendor after a format from twrp did the good