Database Develop

[Discussion] PokeMon Go Magisk Discussion Thread

[size=+2]This thread has been created to reduce the amount of clutter in the main Magisk thread, please discuss Magisk + PokeMon Go here.​[/size]

With me is this happening, did the process and pokemon jog go wheel with root, however when I install Xposed does not work, I downloaded the zip and the apk Xposed, desintalei what was, I was in recovery installed the zip, when you restart disable the root by magisk manager and I run the game without success, to turn off the Xposed and restart the game runs, but when active and restart does not work, sometimes the apk Xposed for work, or is giving error and asking to check records, someone help there? They will excusing my English

So at this point I can't log into pogo because I have Xposed installed (systemless). I was using magisk with phh super user...wasn't working with SuperSU (even with compatible magisk)
At this point if I do a soft reboot it deactivates Xposed (for whatever reason) I can play Pokemon but have to reboot to activate Xposed. So anytime I want to play I have to soft reboot then full reboot. Luckily I don't have to go through optimizing apps...but is there a way around this?

Someone bored should make a zip that removes everything and reinstalls the rest of the stuff needed.
Sent from my SM-N920W8 using XDA-Developers mobile app

DAGr8 said:
Someone bored should make a zip that removes everything and reinstalls the rest of the stuff needed.
Sent from my SM-N920W8 using XDA-Developers mobile app
Click to expand...
Click to collapse
You?

I rather wait for an xposed update. I can play with 0.35 if I really get the itch in the meanwhile. I hardly battle and until legendaries start to appear, I'm just slowly leveling up.
If 86.2 is working, like someone mentioned on the other thread, there has to be a workaround for the 86.5 (maybe a future 86.6?)
Only gripe is that Google is all over this because of paynet so it will be a constant battle.
Only way to calm down this race is for Google/Niantic easing pressure on pogo security so there aren't so many people trying to hack the system and leaving paynet alone.
That would be the smartest move for all (not mentioning calming down thousands of root users).
Interesting times
Enviado do meu GT-I9195 através de Tapatalk

anthonymackay said:
So at this point I can't log into pogo because I have Xposed installed (systemless). I was using magisk with phh super user...wasn't working with SuperSU (even with compatible magisk)
At this point if I do a soft reboot it deactivates Xposed (for whatever reason) I can play Pokemon but have to reboot to activate Xposed. So anytime I want to play I have to soft reboot then full reboot. Luckily I don't have to go through optimizing apps...but is there a way around this?
Click to expand...
Click to collapse
Actually systemless xposed v86.2 is working fine woth Pokemon go. Some people posted the steps in the other thread.

So I flashed the latest chainfire SuperSU 2.78 r1, v86.2 systemless xposed, and suhide v0.53. Everything works good only problem I'm having excessive location jumps to/from real location while playing pogo with xposed pokemon. Used to have the odd jump back/forth but this is every 5-10 seconds.

juangcardoso said:
Actually systemless xposed v86.2 is working fine woth Pokemon go. Some people posted the steps in the other thread.
Click to expand...
Click to collapse
I thought I was going crazy. One whole day, two full resets and re-roots later and found the system-less xposed glitch that took me here. Does this 86.2 really works?. Don't want another round with my phone.

sigiloso said:
I thought I was going crazy. One whole day, two full resets and re-roots later and found the system-less xposed glitch that took me here. Does this 86.2 really works?. Don't want another round with my phone.
Click to expand...
Click to collapse
Yes, but there are the correct way to flash it with SuperSU and suhide. You can find these steps in the systemless xposed as I told u.

juangcardoso said:
Yes, but there are the correct way to flash it with SuperSU and suhide. You can find these steps in the systemless xposed as I told u.
Click to expand...
Click to collapse
I have tried so many times to do xposed systemless but none of them worked.
I returned to stock image. I created file with "SYSTEMLESS=true" in /data/.supersu
I flashed SuperSU 2.78. Then I flashed systemless xposed v.86.2.
I flashed suhide 0.53. wipe cache/dalvik and nothing works because I think its detecting the xposed framework

juangcardoso said:
Actually systemless xposed v86.2 is working fine woth Pokemon go. Some people posted the steps in the other thread.
Click to expand...
Click to collapse
Hi!
Could you link the post to this thread please? I'm sure it would help a lot of people (me included). I scanned through the other thread but couldn't find it. Perhaps, I missed it somewhere.

naeco said:
Hi!
Could you link the post to this thread please? I'm sure it would help a lot of people (me included). I scanned through the other thread but couldn't find it. Perhaps, I missed it somewhere.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3450396
Envoyé de mon ONEPLUS A3003 en utilisant Tapatalk

anthonymackay said:
So at this point I can't log into pogo because I have Xposed installed (systemless). I was using magisk with phh super user...wasn't working with SuperSU (even with compatible magisk)
At this point if I do a soft reboot it deactivates Xposed (for whatever reason) I can play Pokemon but have to reboot to activate Xposed. So anytime I want to play I have to soft reboot then full reboot. Luckily I don't have to go through optimizing apps...but is there a way around this?
Click to expand...
Click to collapse
Magisk requires a full boot too load is modules, that's why xposed is disabled with a soft boot.
You can also use the disable xposed toggle in the material xposed installer. It would still require a reboot.

Guess I'm out of luck. My phone doesn't meet SuHide requirement. I'm running twrp v.2.8.7.0 not v.3.x.

Anyone know if there is an 86.2 version for Lollipop? all I can find is the sdk23 version for Marshmellow.

Habulda said:
I have tried so many times to do xposed systemless but none of them worked.
I returned to stock image. I created file with "SYSTEMLESS=true" in /data/.supersu
I flashed SuperSU 2.78. Then I flashed systemless xposed v.86.2.
I flashed suhide 0.53. wipe cache/dalvik and nothing works because I think its detecting the xposed framework
Click to expand...
Click to collapse
naeco said:
Hi!
Could you link the post to this thread please? I'm sure it would help a lot of people (me included). I scanned through the other thread but couldn't find it. Perhaps, I missed it somewhere.
Click to expand...
Click to collapse
I manage to play Pokemon Go w/ xposed and root with these tips: http://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268/post68778700

Hey guys. Galaxy s3 mini with cm12.1 (android 5.1.1) fresh install. Tried to install magisk but it says unable to detect boot image. What is the problem ? Please help me.

I need download xposed-v86.2-SDK22.arm. Please post the link for donwload XPOSED 86.2 SDK22 arm!! Help me please.
I find the zip file anywhere. I need SDK22 arm 86.2 for android 5.1 - Someone can attach the direct link to download the ZIP please?

naeco said:
Guess I'm out of luck. My phone doesn't meet SuHide requirement. I'm running twrp v.2.8.7.0 not v.3.x.
Click to expand...
Click to collapse
a user report that it works with twrp 2.8.7

How to go from normal root to systemless root for Magisk?

Title says it all. Im currently using using SuperSU so looking for Systemless root and looking for Xposed to work as well.

Remove SuperSU, flash Magisk. That's basically it... If you have issues on the way there's lots of info in the support read and some things to try here:
https://forum.xda-developers.com/apps/magisk/magisk-magisk-hide-troubleshooting-tips-t3561828

Didgeridoohan said:
Remove SuperSU, flash Magisk. That's basically it... If you have issues on the way there's lots of info in the support read and some things to try here:
https://forum.xda-developers.com/apps/magisk/magisk-magisk-hide-troubleshooting-tips-t3561828
Click to expand...
Click to collapse
Do I remove SuperSU thru it's manager and then flash Magisk?

riahc3 said:
Do I remove SuperSU thru it's manager and then flash Magisk?
Click to expand...
Click to collapse
Yes, choosing the full unroot option. It is also good to have the unsu zip by osm0sis handy, but the full unroot option should work.

jhedfors said:
Yes, choosing the full unroot option. It is also good to have the unsu zip by osm0sis handy, but the full unroot option should work.
Click to expand...
Click to collapse
This just flash Magisk? No Xposed issues?

riahc3 said:
This just flash Magisk? No Xposed issues?
Click to expand...
Click to collapse
I don't use Xposed, as it does not work on Nougat. You will need to install the Xposed module in the Magisk Downloads tab.

jhedfors said:
I don't use Xposed, as it does not work on Nougat. You will need to install the Xposed module in the Magisk Downloads tab.
Click to expand...
Click to collapse
Im on 6.0 so I do and its important.
Well, here goes nothing I guess....

When SuperSU asked if I wanted to recover the boot image (I think it was that) I said no.
Issues with that?

Checking patch status
SuperSU patched boot detected!
Adding auto patch scirpt for supersu
SuperSU image mount failed...
Will still try to complete installation
Device still does boot...which I guess is still a good sign.

Says Ive lost root....
Magisk does say it is installed.

riahc3 said:
Checking patch status
SuperSU patched boot detected!
Adding auto patch scirpt for supersu
SuperSU image mount failed...
Will still try to complete installation
Device still does boot...which I guess is still a good sign.
Click to expand...
Click to collapse
Reflashed the SuperSU zip.....Opening Magisk Manager.....its currently stuck opening it. Only the logo with the background appears.
Android says "Magisk Manager is not responding".
OK! Wow, that took a while lol....
Latest version of Magisk installed....
Properly rooted
279:SUPERSU
Checking SafetlyNet Failed: CTS Profile Mismatch

riahc3 said:
Reflashed the SuperSU zip.....Opening Magisk Manager.....its currently stuck opening it. Only the logo with the background appears.
Android says "Magisk Manager is not responding".
OK! Wow, that took a while lol....
Latest version of Magisk installed....
Properly rooted
279:SUPERSU
Checking SafetlyNet Failed: CTS Profile Mismatch
Click to expand...
Click to collapse
CTS profile mismatch will happen if you're using SuperSU.
The one thing that went wrong was you saying no to restoring the boot image backup. If you want to use MagiskSU you'll need to flash it over a boot image that doesn't have the SuperSU patches.

Didgeridoohan said:
CTS profile mismatch will happen if you're using SuperSU.
The one thing that went wrong was you saying no to restoring the boot image backup. If you want to use MagiskSU you'll need to flash it over a boot image that doesn't have the SuperSU patches.
Click to expand...
Click to collapse
At this point, is there is a way to fix it?
I have gotten also gotten systemless Xposed installed

riahc3 said:
At this point, is there is a way to fix it?
I have gotten also gotten systemless Xposed installed
Click to expand...
Click to collapse
If you're happy with your current setup, leave it be. If you need to pass SafetyNet (you'll need to disable Xposed for that) you'll have to start over.

Didgeridoohan said:
If you're happy with your current setup, leave it be. If you need to pass SafetyNet (you'll need to disable Xposed for that) you'll have to start over.
Click to expand...
Click to collapse
Doesnt systemless Xposed pass SafetyNet?

riahc3 said:
Doesnt systemless Xposed pass SafetyNet?
Click to expand...
Click to collapse
No.

Didgeridoohan said:
No.
Click to expand...
Click to collapse
Oh! My mistake then
I could careless about SafetyCheck as I need Xposed modules.
Besides, that, then Magisk is working? That was pretty simple. Thank you for your help.
Reading thru your thread, I cant really see what SafetyCheck implies. Does it just affect that stupid Pokemon crap? I imagine it affects more things like banks but I dont think mines will depend on that.

riahc3 said:
Oh! My mistake then
I could careless about SafetyCheck as I need Xposed modules.
Besides, that, then Magisk is working? That was pretty simple. Thank you for your help.
Reading thru your thread, I cant really see what SafetyCheck implies. Does it just affect that stupid Pokemon crap? I imagine it affects more things like banks but I dont think mines will depend on that.
Click to expand...
Click to collapse
Magisk works fine with SuperSU. It's if you'd ever want to hide root from some process or app that you might have some trouble, since Magisk Hide is developed with MagiskSU in mind.
There are some banking apps, Android Pay, Pokemon Go other apps that utilise SafetyNet. I do believe that more and more apps will use in the future and the cat and mouse game of hiding root is gonna continue...

riahc3 said:
Im on 6.0 so I do and its important.
Well, here goes nothing I guess....
Click to expand...
Click to collapse
I am also on android 6.0.1 and need to install magisk to work with safetynet to install games like pokemon , supermario run etc . Why do you say Xposed is required? also, did full unroot from within superSU app worked for you or you flashed UnSu for that?
Thanks

anshulsingh said:
I am also on android 6.0.1 and need to install magisk to work with safetynet to install games like pokemon , supermario run etc . Why do you say Xposed is required? also, did full unroot from within superSU app worked for you or you flashed UnSu for that?
Thanks
Click to expand...
Click to collapse
I use Xposed modules in my daily life and cannot afford to be without them.

Magisk v12 loses root after a short while.

I noticed today that I lost root. I searched and tried everything to fix it but I couldn't. So, I wiped out my entire phone and did a clean flash of Resurrection Remix 5.8.3 for the TMobile Note 3. Magisk worked after a clean flash.
Spent hours loading every app back on and now, Magisk isn't working again?
Please help?
Android version is 7.1.2.

Did it really lose root? I've found that randomly when you open Magisk it will claim that it has no root access, but when you close it (exit the app and swipe it away from the recents menu) and reopen it it will start functioning properly again.

Neo3D said:
I noticed today that I lost root. I searched and tried everything to fix it but I couldn't. So, I wiped out my entire phone and did a clean flash of Resurrection Remix 5.8.3 for the TMobile Note 3. Magisk worked after a clean flash.
Spent hours loading every app back on and now, Magisk isn't working again?
Please help?
Android version is 7.1.2.
Click to expand...
Click to collapse
Use un su zip first to remove the pre-installed root that rr has. Don't know if RR has root inbuilt now or not. But if it comes with root uninstall it and flash magisk on top of it and you are good to go

Me too have this problem. Magisk root sometimes gone, and i need to reboot device to make it work agan.
Tested in almost N custom roms like CM14.1, AEX, Omni, ViperOS, etc

exodius48 said:
Me too have this problem. Magisk root sometimes gone, and i need to reboot device to make it work agan.
Tested in almost N custom roms like CM14.1, AEX, Omni, ViperOS, etc
Click to expand...
Click to collapse
Did u remove built in root

shantam3108 said:
Did u remove built in root
Click to expand...
Click to collapse
If you installed magisk it will remove built in root automatically. -_-

Did you turn off magisk busybox ? It would help on fix that.
In another way, some of modules you installed may have potential to make you lose root. Trying to do enable/disable module to test it.

I did some more searching and someone said just flash Magisk again. I did that and it worked! But, then I lost root again several hours later, seems so random? I flashed Magisk again and it worked again.
I can only get two green on Magisk, the third green seems to run forever, I left it on for 10+ minutes and it still showed "testing".
BTW, I didn't flash the uninstall Magisk zip before re-flashing. I tried that way and my phone got into a bootloop. Luckily, I had a TWRP backup.

Kris Chen said:
Did you turn off magisk busybox ? It would help on fix that.
In another way, some of modules you installed may have potential to make you lose root. Trying to do enable/disable module to test it.
Click to expand...
Click to collapse
Thanks! I'll try this and see if it helps!

BTW, is anyone able to install Snapchat? I tried the Hide feature in Magisk and checked Snapchat, but it still knows I'm rooted and immediately closes after opening.
Also, the Sphero BB8 app? Anyone get that working? That one also closes right after opening.

exodius48 said:
If you installed magisk it will remove built in root automatically. -_-
Click to expand...
Click to collapse
No magisk just overrides the root. Use Un su zip first then flash magisk and u won't lose root
---------- Post added at 01:21 AM ---------- Previous post was at 01:20 AM ----------
Neo3D said:
Thanks! I'll try this and see if it helps!
Click to expand...
Click to collapse
Also keep in mind do run magisk without any modules first to check

shantam3108 said:
No magisk just overrides the root. Use Un su zip first then flash magisk and u won't lose root
Click to expand...
Click to collapse
Then why on AEX still loose root? It has no root prebuilt

exodius48 said:
If you installed magisk it will remove built in root automatically. -_-
Click to expand...
Click to collapse
shantam3108 said:
No magisk just overrides the root. Use Un su zip first then flash magisk and u won't lose root
Click to expand...
Click to collapse
I just want to clarify.
If systemless SuperSU is detected, Magisk will use that. If any other root is installed, the installation script will attempt to remove it and install MagiskSU instead (not sure to be successful and might lead to issues). If no root is installed, MagiskSU will be used. To avoid issues, the unSU zip is quite useful.
From v13, Magisk will no longer be compatible with SuperSU.

Didgeridoohan said:
I just want to clarify.
If systemless SuperSU is detected, Magisk will use that. If any other root is installed, the installation script will attempt to remove it and install MagiskSU instead (not sure to be successful and might lead to issues). If no root is installed, MagiskSU will be used. To avoid issues, the unSU zip is quite useful.
From v13, Magisk will no longer be compatible with SuperSU.
Click to expand...
Click to collapse
Wow, this is very informative, thanks!
Which version of unSU.zip is the correct one to use? Is this one okay?
https://forum.xda-developers.com/showpost.php?p=63615067

Neo3D said:
Wow, this is very informative, thanks!
Which version of unSU.zip is the correct one to use? Is this one okay?
https://forum.xda-developers.com/showpost.php?p=63615067
Click to expand...
Click to collapse
That's the one to use. :good:

Neo3D said:
BTW, is anyone able to install Snapchat? I tried the Hide feature in Magisk and checked Snapchat, but it still knows I'm rooted and immediately closes after opening.
Also, the Sphero BB8 app? Anyone get that working? That one also closes right after opening.
Click to expand...
Click to collapse
It is because your device lost safety net.
You need to reflash system and gapps.
Back up data partition then wipe all then flash rom and gaps and then magisk.
After starting device first enable magisk hide.
Then restore backed up /data.
After restart enable magisk hide switches and reboot system.
Profit.
Reply it works or not.

[email protected] said:
It is because your device lost safety net.
You need to reflash system and gapps.
Back up data partition then wipe all then flash rom and gaps and then magisk.
After starting device first enable magisk hide.
Then restore backed up /data.
After restart enable magisk hide switches and reboot system.
Profit.
Reply it works or not.
Click to expand...
Click to collapse
I just flashed magisk again and safety passed!

Neo3D said:
I just flashed magisk again and safety passed!
Click to expand...
Click to collapse
Tell me how much time you have safety net pass?

[email protected] said:
Tell me how much time you have safety net pass?
Click to expand...
Click to collapse
Hi, what do you mean "how much time you have safety net pass?

Neo3D said:
Hi, what do you mean "how much time you have safety net pass?
Click to expand...
Click to collapse
This time after reinstalling magisk is it working till now?
Or root is gone after some time?

Viper4Android Pie Compatible???

As the title states ...v4a is it compatible with pie? Im rooted running a custom rom rooted with magisk. Installed v4a thru magisk manager it installs but i get the install driver /re-install driver message everytime. Is it an workaround to get it working?

recepo1 said:
As the title states ...v4a is it compatible with pie? Im rooted running a custom rom rooted with magisk. Installed v4a thru magisk manager it installs but i get the install driver /re-install driver message everytime. Is it an workaround to get it working?
Click to expand...
Click to collapse
working fine here. maybe a root/magisk issue.

bober10113 said:
working fine here. maybe a root/magisk issue.
Click to expand...
Click to collapse
What rom are you on and which version of magisk are you running?

recepo1 said:
What rom are you on and which version of magisk are you running?
Click to expand...
Click to collapse
infinity rom.
magisk v18 and also newer test canary builds.
but prety sure its an issue where you don't wait 3 minutes after rebooting before doing actions that require root.
and not sure to which extent you tried to make magisk work with various files and mods but maybe you should just factory wipe and try and get magisk working before anything else. also mayke sure busybox is installed. and dont forget that 3 minute rule after a reboot.

bober10113 said:
infinity rom.
magisk v18 and also newer test canary builds.
but prety sure its an issue where you don't wait 3 minutes after rebooting before doing actions that require root.
and not sure to which extent you tried to make magisk work with various files and mods but maybe you should just factory wipe and try and get magisk working before anything else. also mayke sure busybox is installed. and dont forget that 3 minute rule after a reboot.
Click to expand...
Click to collapse
Thanks im sure it maybe an magisk issue im running 17.3 because i kept losing root on v18. I acquire root with v4a but it freezes and then keeps telling me to reinstall driver after reboot. I will try the 3 minute rule though..thank you. You installed v4a directly thru magisk or flashed a different version?

recepo1 said:
Thanks im sure it maybe an magisk issue im running 17.3 because i kept losing root on v18. I acquire root with v4a but it freezes and then keeps telling me to reinstall driver after reboot. I will try the 3 minute rule though..thank you. You installed v4a directly thru magisk or flashed a different version?
Click to expand...
Click to collapse
v3.3 on magisk dated of jan. 16th.
use aroma option. it will reboot on its own from magisk console and the just follow the automated steps in recovery

bober10113 said:
v3.3 on magisk dated of jan. 16th.
use aroma option. it will reboot on its own from magisk console and the just follow the automated steps in recovery
Click to expand...
Click to collapse
Thank you appreciate your help i will give it a try

I have tried everything for hours to get viper4android to work with no avail until now. Go to the xda download page and select the beta version. Boom. It works. I know you might have long forgot this or already figured it out but I had to share

old legacy magisk module has been working for months and months.

[Q] How to install XPosed in Galaxy S8 (Android 8.0 Oreo Stock ROM)

Hey, so I've tried to install it by the XPosed installer APP 3.1.5 and I got "error 1", then I uninstalled the APP and flashed the XPosed Magisk module, and my phone got stuck in a bootloop. Trying to solve it, I flashed the xposed uninstaller ZIP with TWRP and (thanks God) the phone turned on. But now I just don't know how to proceed. What should I do to install it correctly?
Device: SM-G950FD (Galaxy S8 Exynos) - Rooted with Magisk
OS: Android 8.0 Official Stock ROM

mxttos said:
Hey, so I've tried to install it by the XPosed installer APP 3.1.5 and I got "error 1", then I uninstalled the APP and flashed the XPosed Magisk module, and my phone got stuck in a bootloop. Trying to solve it, I flashed the xposed uninstaller ZIP with TWRP and (thanks God) the phone turned on. But now I just don't know how to proceed. What should I do to install it correctly?
Device: SM-G950FD (Galaxy S8 Exynos) - Rooted with Magisk
OS: Android 8.0 Official Stock ROM
Click to expand...
Click to collapse
You need the wanam fix for your xposed to work.... Xposed has incompatibility on certain Samsung devices and the wanam fixes that issue unfortunately it hasn't been updated with the fix in a while theres a way around it however it's a little technical
([emoji3590]09-09-18[emoji3590])

PoochyX said:
You need the wanam fix for your xposed to work.... Xposed has incompatibility on certain Samsung devices and the wanam fixes that issue unfortunately it hasn't been updated with the fix in a while theres a way around it however it's a little technical
([emoji3590]09-09-18[emoji3590])
Click to expand...
Click to collapse
Is there any guide for it? And will safenet work?

mxttos said:
Is there any guide for it? And will safenet work?
Click to expand...
Click to collapse
I made it happen my experience there is no guide for this workaround and xposed will always break safety net.... However the beautiful thing about systemless xposed is that when you deactivate the module and reboot you Will be able to pass safety net and when you done with passing safety net you re-enable the module
([emoji3590]09-09-18[emoji3590])

PoochyX said:
I made it happen my experience there is no guide for this workaround and xposed will always break safety net.... However the beautiful thing about systemless xposed is that when you deactivate the module and reboot you Will be able to pass safety net and when you done with passing safety net you re-enable the module
([emoji3590]09-09-18[emoji3590])
Click to expand...
Click to collapse
And how can I install this systemless XPosed without bootloop? And all the modules work normally with it?

mxttos said:
And how can I install this systemless XPosed without bootloop? And all the modules work normally with it?
Click to expand...
Click to collapse
Yeah once u have the fix enabled all modules will work properly
([emoji3590]09-09-18[emoji3590])

PoochyX said:
Yeah once u have the fix enabled all modules will work properly
([emoji3590]09-09-18[emoji3590])
Click to expand...
Click to collapse
Can you help me with that?

mxttos said:
Can you help me with that?
Click to expand...
Click to collapse
Hmmm telegram PoochyX
([emoji3590]09-09-18[emoji3590])