[Q] How to install XPosed in Galaxy S8 (Android 8.0 Oreo Stock ROM) - Xposed General

Hey, so I've tried to install it by the XPosed installer APP 3.1.5 and I got "error 1", then I uninstalled the APP and flashed the XPosed Magisk module, and my phone got stuck in a bootloop. Trying to solve it, I flashed the xposed uninstaller ZIP with TWRP and (thanks God) the phone turned on. But now I just don't know how to proceed. What should I do to install it correctly?
Device: SM-G950FD (Galaxy S8 Exynos) - Rooted with Magisk
OS: Android 8.0 Official Stock ROM

mxttos said:
Hey, so I've tried to install it by the XPosed installer APP 3.1.5 and I got "error 1", then I uninstalled the APP and flashed the XPosed Magisk module, and my phone got stuck in a bootloop. Trying to solve it, I flashed the xposed uninstaller ZIP with TWRP and (thanks God) the phone turned on. But now I just don't know how to proceed. What should I do to install it correctly?
Device: SM-G950FD (Galaxy S8 Exynos) - Rooted with Magisk
OS: Android 8.0 Official Stock ROM
Click to expand...
Click to collapse
You need the wanam fix for your xposed to work.... Xposed has incompatibility on certain Samsung devices and the wanam fixes that issue unfortunately it hasn't been updated with the fix in a while theres a way around it however it's a little technical
([emoji3590]09-09-18[emoji3590])

PoochyX said:
You need the wanam fix for your xposed to work.... Xposed has incompatibility on certain Samsung devices and the wanam fixes that issue unfortunately it hasn't been updated with the fix in a while theres a way around it however it's a little technical
([emoji3590]09-09-18[emoji3590])
Click to expand...
Click to collapse
Is there any guide for it? And will safenet work?

mxttos said:
Is there any guide for it? And will safenet work?
Click to expand...
Click to collapse
I made it happen my experience there is no guide for this workaround and xposed will always break safety net.... However the beautiful thing about systemless xposed is that when you deactivate the module and reboot you Will be able to pass safety net and when you done with passing safety net you re-enable the module
([emoji3590]09-09-18[emoji3590])

PoochyX said:
I made it happen my experience there is no guide for this workaround and xposed will always break safety net.... However the beautiful thing about systemless xposed is that when you deactivate the module and reboot you Will be able to pass safety net and when you done with passing safety net you re-enable the module
([emoji3590]09-09-18[emoji3590])
Click to expand...
Click to collapse
And how can I install this systemless XPosed without bootloop? And all the modules work normally with it?

mxttos said:
And how can I install this systemless XPosed without bootloop? And all the modules work normally with it?
Click to expand...
Click to collapse
Yeah once u have the fix enabled all modules will work properly
([emoji3590]09-09-18[emoji3590])

PoochyX said:
Yeah once u have the fix enabled all modules will work properly
([emoji3590]09-09-18[emoji3590])
Click to expand...
Click to collapse
Can you help me with that?

mxttos said:
Can you help me with that?
Click to expand...
Click to collapse
Hmmm telegram PoochyX
([emoji3590]09-09-18[emoji3590])

Related

MagiskSU Install Help

HTC One M9
Venom Rom - ViperOne
Phh's SuperUser installed
Magisk 11.1 installed
Android N
Flashed a new rom (Viper) and it gave me the option to install PHH's SuperUser and Magisk, so I did. Once setting up the device I updated Magisk to 11.1 and installed the PHH's SuperUser (Magisk version) off of the official RT thread here on XDA.
Magisk Manager says I have Magisk 11.1 installed correctly and it is properly rooted, but my phone does not pass safety net, instead it says "CTS Profile Mismatch." After looking through the settings I saw the option for Magisk Hide so switched it off and back on and it says...
"You are not rooted with MagiskSU, using Magisk Hide might not be enough! It's not officially supported, and you would need additional tools (e.g Suhide) to pass Safety Net."
Can someone please help me with what to do?
Thank you,
Ollie Bednal.
obednal97 said:
HTC One M9
Venom Rom - ViperOne
Phh's SuperUser installed
Magisk 11.1 installed
Android N
Flashed a new rom (Viper) and it gave me the option to install PHH's SuperUser and Magisk, so I did. Once setting up the device I updated Magisk to 11.1 and installed the PHH's SuperUser (Magisk version) off of the official RT thread here on XDA.
Magisk Manager says I have Magisk 11.1 installed correctly and it is properly rooted, but my phone does not pass safety net, instead it says "CTS Profile Mismatch." After looking through the settings I saw the option for Magisk Hide so switched it off and back on and it says...
"You are not rooted with MagiskSU, using Magisk Hide might not be enough! It's not officially supported, and you would need additional tools (e.g Suhide) to pass Safety Net."
Can someone please help me with what to do?
Thank you,
Ollie Bednal.
Click to expand...
Click to collapse
Remove PHH Superuser completely - including apk - and re-flash Magisk.
osmOsis's UnSu script does a good job of removing all traces of root.
jhedfors said:
Remove PHH Superuser completely - including apk - and re-flash Magisk.
osmOsis's UnSu script does a good job of removing all traces of root.
Click to expand...
Click to collapse
Thank you for your quick response!
Where and how do I find and install the original boot.img to remove phh's superuser?
obednal97 said:
Thank you for your quick response!
Where and how do I find and install the original boot.img to remove phh's superuser?
Click to expand...
Click to collapse
The original boot image is what is in the ROM zip. However, as you mentioned that root is preinstalled, you should flash osmOsis's UnSu zip to get rid of root before reflashing Magisk.
jhedfors said:
The original boot image is what is in the ROM zip. However, as you mentioned that root is preinstalled, you should flash osmOsis's UnSu zip to get rid of root before reflashing Magisk.
Click to expand...
Click to collapse
Thank you very much for your help, just doing it now ?
jhedfors said:
The original boot image is what is in the ROM zip. However, as you mentioned that root is preinstalled, you should flash osmOsis's UnSu zip to get rid of root before reflashing Magisk.
Click to expand...
Click to collapse
Just done it all! It works beautifully!
I messed up the first time cause I couldn't remove Superuser app completely but I got round that and did it all again and its all green lights
Installed Magisk ☑
Rooted ☑
Safety net passed ☑
Thank you very much!
obednal97 said:
Just done it all! It works beautifully!
I messed up the first time cause I couldn't remove Superuser app completely but I got round that and did it all again and its all green lights
Installed Magisk ☑
Rooted ☑
Safety net passed ☑
Thank you very much!
Click to expand...
Click to collapse
Awesome!
cts profile mismatch
i have a xiaomi device which has epic rom based on android 6.0 with magisksu preinstalled by i cant bypass safetynet check either. what should i do?? i did a reinstall of magisk but it didn't helped.
aldo-000 said:
i have a xiaomi device which has epic rom based on android 6.0 with magisksu preinstalled by i cant bypass safetynet check either. what should i do?? i did a reinstall of magisk but it didn't helped.
Click to expand...
Click to collapse
If the ROM has Magisk pre-installed, you may want to check in the ROM thread. Otherwise try everything I suggested in this thread.
jhedfors said:
If the ROM has Magisk pre-installed, you may want to check in the ROM thread. Otherwise try everything I suggested in this thread.
Click to expand...
Click to collapse
uninstalling magisk, still can't bypass safetynet test but i can play pokemon go., wired.... i will ask about the rom. do you another way making pg playable on rooted device??
aldo-000 said:
uninstalling magisk, still can't bypass safetynet test but i can play pokemon go., wired.... i will ask about the rom. do you another way making pg playable on rooted device??
Click to expand...
Click to collapse
Did you do what I suggested? If so, can you say what you did?
aldo-000 said:
i have a xiaomi device which has epic rom based on android 6.0 with magisksu preinstalled by i cant bypass safetynet check either. what should i do?? i did a reinstall of magisk but it didn't helped.
Click to expand...
Click to collapse
Is it based on Developer or Stable ROM? Develop ROMs can't pass SafetyNet because they don't have the correct CTS profile. If it's based on Stable ROM, try flashing Global Stable again and Epic ROM afterwards, that might or might not help, no guarantees. You are only guaranteed to pass CTS profile match with Global Stable. But like you said, if Pokemon Go works you don't really need CTS profile.
i have moto E 3g 2 gen[OTUS] with Recusrtion remix 5.8.1 android 7
have flashed magisk but it gives error :1 error installing magisk 11.1 , while i did same with moto e [Condor] 1st gen and got success everything is working
even i clean the old su
can you help @jhedfors
Hi, I've just switched over to magisksu from supersu. I did as you suggested above... flashed unSu and the boot image and magisk. Then installed the Magisk manager from play store. It shows the device is rooted and that latest magisk is installed. However, safenet check fails.
Any suggestions on what to do?
Thanks
neptune_ said:
Hi, I've just switched over to magisksu from supersu. I did as you suggested above... flashed unSu and the boot image and magisk. Then installed the Magisk manager from play store. It shows the device is rooted and that latest magisk is installed. However, safenet check fails.
Any suggestions on what to do?
Thanks
Click to expand...
Click to collapse
Reboot with setting everything enable except disabling magisk it worked for me
Rush94 said:
Reboot with setting everything enable except disabling magisk it worked for me
Click to expand...
Click to collapse
Tried that, but SafetyNet check still fails
neptune_ said:
Tried that, but SafetyNet check still fails
Click to expand...
Click to collapse
Try enabling hide magisk enable busybox and then reboot
Rush94 said:
Reboot with setting everything enable except disabling magisk it worked for me
Click to expand...
Click to collapse
Rush94 said:
Try enabling hide magisk enable busybox and then reboot
Click to expand...
Click to collapse
Tried that too, still fails
neptune_ said:
Tried that too, still fails
Click to expand...
Click to collapse
Try some of the tips here:
https://forum.xda-developers.com/apps/magisk/magisk-magisk-hide-troubleshooting-tips-t3561828
Didgeridoohan said:
Try some of the tips here:
https://forum.xda-developers.com/apps/magisk/magisk-magisk-hide-troubleshooting-tips-t3561828
Click to expand...
Click to collapse
Thanks. I did read through there and tried some suggestions. Nothing seems to work.
I may have to use a rom that comes packaged with magisk?
Sent from my LG G3 using XDA Labs

How to go from normal root to systemless root for Magisk?

Title says it all. Im currently using using SuperSU so looking for Systemless root and looking for Xposed to work as well.
Remove SuperSU, flash Magisk. That's basically it... If you have issues on the way there's lots of info in the support read and some things to try here:
https://forum.xda-developers.com/apps/magisk/magisk-magisk-hide-troubleshooting-tips-t3561828
Didgeridoohan said:
Remove SuperSU, flash Magisk. That's basically it... If you have issues on the way there's lots of info in the support read and some things to try here:
https://forum.xda-developers.com/apps/magisk/magisk-magisk-hide-troubleshooting-tips-t3561828
Click to expand...
Click to collapse
Do I remove SuperSU thru it's manager and then flash Magisk?
riahc3 said:
Do I remove SuperSU thru it's manager and then flash Magisk?
Click to expand...
Click to collapse
Yes, choosing the full unroot option. It is also good to have the unsu zip by osm0sis handy, but the full unroot option should work.
jhedfors said:
Yes, choosing the full unroot option. It is also good to have the unsu zip by osm0sis handy, but the full unroot option should work.
Click to expand...
Click to collapse
This just flash Magisk? No Xposed issues?
riahc3 said:
This just flash Magisk? No Xposed issues?
Click to expand...
Click to collapse
I don't use Xposed, as it does not work on Nougat. You will need to install the Xposed module in the Magisk Downloads tab.
jhedfors said:
I don't use Xposed, as it does not work on Nougat. You will need to install the Xposed module in the Magisk Downloads tab.
Click to expand...
Click to collapse
Im on 6.0 so I do and its important.
Well, here goes nothing I guess....
When SuperSU asked if I wanted to recover the boot image (I think it was that) I said no.
Issues with that?
Checking patch status
SuperSU patched boot detected!
Adding auto patch scirpt for supersu
SuperSU image mount failed...
Will still try to complete installation
Device still does boot...which I guess is still a good sign.
Says Ive lost root....
Magisk does say it is installed.
riahc3 said:
Checking patch status
SuperSU patched boot detected!
Adding auto patch scirpt for supersu
SuperSU image mount failed...
Will still try to complete installation
Device still does boot...which I guess is still a good sign.
Click to expand...
Click to collapse
Reflashed the SuperSU zip.....Opening Magisk Manager.....its currently stuck opening it. Only the logo with the background appears.
Android says "Magisk Manager is not responding".
OK! Wow, that took a while lol....
Latest version of Magisk installed....
Properly rooted
279:SUPERSU
Checking SafetlyNet Failed: CTS Profile Mismatch
riahc3 said:
Reflashed the SuperSU zip.....Opening Magisk Manager.....its currently stuck opening it. Only the logo with the background appears.
Android says "Magisk Manager is not responding".
OK! Wow, that took a while lol....
Latest version of Magisk installed....
Properly rooted
279:SUPERSU
Checking SafetlyNet Failed: CTS Profile Mismatch
Click to expand...
Click to collapse
CTS profile mismatch will happen if you're using SuperSU.
The one thing that went wrong was you saying no to restoring the boot image backup. If you want to use MagiskSU you'll need to flash it over a boot image that doesn't have the SuperSU patches.
Didgeridoohan said:
CTS profile mismatch will happen if you're using SuperSU.
The one thing that went wrong was you saying no to restoring the boot image backup. If you want to use MagiskSU you'll need to flash it over a boot image that doesn't have the SuperSU patches.
Click to expand...
Click to collapse
At this point, is there is a way to fix it?
I have gotten also gotten systemless Xposed installed
riahc3 said:
At this point, is there is a way to fix it?
I have gotten also gotten systemless Xposed installed
Click to expand...
Click to collapse
If you're happy with your current setup, leave it be. If you need to pass SafetyNet (you'll need to disable Xposed for that) you'll have to start over.
Didgeridoohan said:
If you're happy with your current setup, leave it be. If you need to pass SafetyNet (you'll need to disable Xposed for that) you'll have to start over.
Click to expand...
Click to collapse
Doesnt systemless Xposed pass SafetyNet?
riahc3 said:
Doesnt systemless Xposed pass SafetyNet?
Click to expand...
Click to collapse
No.
Didgeridoohan said:
No.
Click to expand...
Click to collapse
Oh! My mistake then
I could careless about SafetyCheck as I need Xposed modules.
Besides, that, then Magisk is working? That was pretty simple. Thank you for your help.
Reading thru your thread, I cant really see what SafetyCheck implies. Does it just affect that stupid Pokemon crap? I imagine it affects more things like banks but I dont think mines will depend on that.
riahc3 said:
Oh! My mistake then
I could careless about SafetyCheck as I need Xposed modules.
Besides, that, then Magisk is working? That was pretty simple. Thank you for your help.
Reading thru your thread, I cant really see what SafetyCheck implies. Does it just affect that stupid Pokemon crap? I imagine it affects more things like banks but I dont think mines will depend on that.
Click to expand...
Click to collapse
Magisk works fine with SuperSU. It's if you'd ever want to hide root from some process or app that you might have some trouble, since Magisk Hide is developed with MagiskSU in mind.
There are some banking apps, Android Pay, Pokemon Go other apps that utilise SafetyNet. I do believe that more and more apps will use in the future and the cat and mouse game of hiding root is gonna continue...
riahc3 said:
Im on 6.0 so I do and its important.
Well, here goes nothing I guess....
Click to expand...
Click to collapse
I am also on android 6.0.1 and need to install magisk to work with safetynet to install games like pokemon , supermario run etc . Why do you say Xposed is required? also, did full unroot from within superSU app worked for you or you flashed UnSu for that?
Thanks
anshulsingh said:
I am also on android 6.0.1 and need to install magisk to work with safetynet to install games like pokemon , supermario run etc . Why do you say Xposed is required? also, did full unroot from within superSU app worked for you or you flashed UnSu for that?
Thanks
Click to expand...
Click to collapse
I use Xposed modules in my daily life and cannot afford to be without them.

Pass SafetyNet with Xposed?

I've been reading several threads here and in other forums as well, and I still not sure if this is possible at all, or it depends on the Xposed modules, etc.
I'm planning to do a clean install of the RR ROM, 6.0.1, try to remove all traces of root, then flash magisk and see if I can pass SafetyNet.
Does a custom kernel interfieres with that?
And if I pass it... any possibility to use Xposed (being active) and pass SafetyNet? Or at least hide it for problematic apps, like Netflix, or Mario Run?
Thanks in advance.
No, Xposed and SafetyNet is a no-go for now.
If you have a device, which ROM has security patches older than November 2016, you may try to use suhide along with Magisk and its MagiskHide, but no guarantees.
The ROM I plan to use is from september, you mean with suhide maybe SafetyNet could pass with Xposed enabled?
Thanks!
eXtremeDevil said:
I've been reading several threads here and in other forums as well, and I still not sure if this is possible at all, or it depends on the Xposed modules, etc.
I'm planning to do a clean install of the RR ROM, 6.0.1, try to remove all traces of root, then flash magisk and see if I can pass SafetyNet.
Does a custom kernel interfieres with that?
And if I pass it... any possibility to use Xposed (being active) and pass SafetyNet? Or at least hide it for problematic apps, like Netflix, or Mario Run?
Thanks in advance.
Click to expand...
Click to collapse
With Xposed Safetynet gone.
But you can use no device check module to pass ctsProfile True. But you can't anything about basicintegrity.
the ctsProfile in important. This mean you can play super Mario run or use Netflix in your device. But because of the basicintegrity you can't download or update this app from play store. You can download from apkmirror site.
Netflix and super Mario run in my phone.
Sent from my HTC U11 using Tapatalk
arianat said:
With Xposed Safetynet gone.
But you can use no device check module to pass ctsProfile True. But you can't anything about basicintegrity.
the ctsProfile in important. This mean you can play super Mario run or use Netflix in your device. But because of the basicintegrity you can't download or update this app from play store. You can download from apkmirror site.
Netflix and super Mario run in my phone.
Sent from my HTC U11 using Tapatalk
Click to expand...
Click to collapse
Let's see if I understood it correctly. Can I have custom ROM + Magisk + SuperSU + custom kernel + Xposed active and with this module I can use that kind of apps?
Thanks!
eXtremeDevil said:
Let's see if I understood it correctly. Can I have custom ROM + Magisk + SuperSU + custom kernel + Xposed active and with this module I can use that kind of apps?
Thanks!
Click to expand...
Click to collapse
Yes. I have custom kernel on ViperU 1.7 custom Rom in HTC U11
but I think you can't use superSu with magisk. You must use one of them. Why you want superSu? Magisk has superuser
Just install Xposed and install no device check module in Xposed installer
Sent from my HTC U11 using Tapatalk
arianat said:
Yes. I have custom kernel on ViperU 1.7 custom Rom in HTC U11
but I think you can't use superSu with magisk. You must use one of them. Why you want superSu? Magisk has superuser
Just install Xposed and install no device check module in Xposed installer
Sent from my HTC U11 using Tapatalk
Click to expand...
Click to collapse
I use an older Magisk that supports SuperSU. If I need newer Magisk for this to work, or if the module doesn't work with SuperSU, please let me know.
Thanks!
Best way really is root switch, requires reboot and disables xposed bit gets the job done.
kekistaneerefugee said:
Best way really is root switch, requires reboot and disables xposed bit gets the job done.
Click to expand...
Click to collapse
I don't want to be disabling Xposed and rebooting everytime...
eXtremeDevil said:
I use an older Magisk that supports SuperSU. If I need newer Magisk for this to work, or if the module doesn't work with SuperSU, please let me know.
Thanks!
Click to expand...
Click to collapse
The module worked with superuser and superSu
I tested
Sent from my HTC U11 using Tapatalk
Great, thanks, for now I will try MagiskSU. Just flashed ROM, removed su and SN passed. But installed boeffla kernel and not anymore. Is it normal? Can I avoid that? Gonna flash Magisk 13.3 now and check.
Thanks for everything guys!
Never mind, got SN again. But after installing Xposed systemless 87 I get bootloop Any idea why? Or is it really a very long boot? I have no Xposed modules at the time, just trying to boot it.
EDIT
Thanks to liveboot, I can see a boot error: Xposed: Can't find file.
Any clues???
Try install classic. If you don’t want disable xposed for pass basicintegrity , no need to install system less. Systemless xposed not active in my phone and I installed classic.
What’s your device? Do you wipe delvik & cache?
I flashed systemless Xposed from recovery and that did the trick.
If disabled, I pass SN. With the No device check module I pass cts profile.
But, Netflix does not work with that configuration. Maybe that app has extra checks? Thanks.
Sent from my ONE A2003 using Tapatalk
eXtremeDevil said:
I flashed systemless Xposed from recovery and that did the trick.
If disabled, I pass SN. With the No device check module I pass cts profile.
But, Netflix does not work with that configuration. Maybe that app has extra checks? Thanks.
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
What's do you mean extra configuration?
It's must work with pass ctsProfile. Just you can't update or download from play store.
Do you downloaded last version of Netflix for your device dpi and CPU architect from apkmirror?
Sent from my HTC U11 using Tapatalk
With Xposed disabled, and SafetyNet passing at 100%, Netflix says that my device is not compatible. Even installed from Google Play.
BTW, Mario Run only works if Magisk Hide is enabled for it, I guess that's normal (with Xposed active this time)
Thanks for all the clarifications, now I have a better understanding of it all
I guess this is the cause?
https://www.reddit.com/r/netflix/comments/69l2fp/all_netflix_no_longer_available_to_android/
Can anyone confirm?
Thanks!
eXtremeDevil said:
With Xposed disabled, and SafetyNet passing at 100%, Netflix says that my device is not compatible. Even installed from Google Play.
BTW, Mario Run only works if Magisk Hide is enabled for it, I guess that's normal (with Xposed active this time)
Thanks for all the clarifications, now I have a better understanding of it all
Click to expand...
Click to collapse
I don't know why Netflix not work for you. I have Netflix in my phone and using every day.
What's your phone Android build?
Netflix must work on your phone.
I have U11 and installed viperU magisk version custom rom. Android 7.1.1 and August patch.
Custom kernel and classic PurifyOS Xposed with so much modules like xprivacy, appsetting, hush sms, no device check , location report enabler, chromepie, native clipboard, and ...
Sent from my HTC U11 using Tapatalk
I have Resurrection Remix 6.0.1 from september 2016.
Is there a log or something where I can check what is cause Netflix refusal to work?
Do you have Magisk Hide enabled for those apps?
Thanks.
EDIT
Actually, Mario Run is now giving me the code error screen
CTS profile is passing.
EDIT 2
Additional info:
Super Mario Run works fine only for two levels, then is error 804-5100.
Netflix above version 4 (5 and later) says it is incompatible with my device.
- Both appear on Play Store.
- Store version is 8.1.73, installed this afternoon and cleared data.
- Bootloader is unlocked (maybe I should try to relock?).
- I can't find device verification in Play Store settings (is not there), even tried this:
https://forum.xda-developers.com/oneplus-2/help/module-fix-google-play-certification-t3602629
with no luck.
- Xposed installed with modules but disabled (from Xposed Manager).
- SafetyNet passing 100%.
- Tried both and without Magisk Hide enabled for the apps.
- Disabled superuser and enabled Magisk Core only.
- Build version: 6.0.1_r66 - MOB31E (my signature is outdated).
- I had Lucky Patcher but I uninstalled it.
- Also tried this:
https://forum.xda-developers.com/apps/magisk/xiaomi-safetynet-fix-t3600431
Nothing works.
Maybe some other app(s) is being detected by Netflix? Maybe a log would help? Or a full bug report?
Is it the ROM version? Maybe is device specific? Should I open a thread on the device's forum? Am I missing something?
Thanks in advance!
EDIT 3
Android Pay seems to work. I don't have NFC, I only got to the add card screen, but I guess that's enough.
EDIT 4
Kernel is Boeffla.
you need root switch

Xposed

Good day all
Will xposed work on Note 8 (N950FD)?
Thanks in advance
I would guess that an installer for an S8+ might work since it is basically the same device. Since rooting with TWRP and SuperSU I've flashed a few things meant for S8 devices and they either work properly as is or with very minor script tweaking.
Kalm_Traveler said:
I would guess that an installer for an S8+ might work since it is basically the same device. Since rooting with TWRP and SuperSU I've flashed a few things meant for S8 devices and they either work properly as is or with very minor script tweaking.
Click to expand...
Click to collapse
Thanks alot for your quick and kind reply...
Yes it worked... Issue is closed
how are you guys gaining root access?
Hdhntr23 said:
how are you guys gaining root access?
Click to expand...
Click to collapse
Exynos models had root several days ago. I'm using SuperSU at the moment.
me7tarfeek said:
Yes it worked... Issue is closed
Click to expand...
Click to collapse
نوّرنا الله يرضى عليك.
We are here to learn, share and contribute. Otherwise, only the development section would be active (thanks to the developers) while the rest of the sections would be full of threads asking for help.
What method for root did you go with? URL for guide page?
What Xposed modules have you tried and are working? root cloak? Snapprefs?
Did you pass SafteyNet?
Thanks in advance.
Hello with xposed what stuff is actually working and is it stable at all for daily use please?
Kalm_Traveler said:
Exynos models had root several days ago. I'm using SuperSU at the moment.
Click to expand...
Click to collapse
Does Samsung Pay work?
طوني تبولة said:
نوّرنا الله يرضى عليك.
We are here to learn, share and contribute. Otherwise, only the development section would be active (thanks to the developers) while the rest of the sections would be full of threads asking for help.
What method for root did you go with? URL for guide page?
What Xposed modules have you tried and are working? root cloak? Snapprefs?
Did you pass SafteyNet?
Thanks in advance.
Click to expand...
Click to collapse
Sure will do
I root with Magisk 14.0 with SafeNet pass
Follow this https://forum.xda-developers.com/ga...t/recovery-twrp-galaxy-note-8-exynos-t3674036
Flashed 26-07-17-xposed-v87-sdk25-Xposed-by-PurifyOS.zip
Now I use the following modules in the image
SiNJiN76 said:
Does Samsung Pay work?
Click to expand...
Click to collapse
I don't think it ever works with a different country device, or on a rooted phone.
me7tarfeek said:
Sure will do
I root with Magisk 14.0 with SafeNet pass
Follow this https://forum.xda-developers.com/ga...t/recovery-twrp-galaxy-note-8-exynos-t3674036
Flashed 26-07-17-xposed-v87-sdk25-Xposed-by-PurifyOS.zip
Now I use the following modules in the image
Click to expand...
Click to collapse
This and Magisk exposed module—that's all to install Xposed?
Are you experiencing some instability—some apps FCing sometimes, or nothing at all?
白い熊 said:
This and Magisk exposed module—that's all to install Xposed?
Are you experiencing some instability—some apps FCing sometimes, or nothing at all?
Click to expand...
Click to collapse
I did not install Magisk xposed module.. I used the normal stand alone xposed... It worked perfect with no issues at all. My device is N950FD....
Hdhntr23 said:
how are you guys gaining root access?
Click to expand...
Click to collapse
Follow this link if your device is N950F/FD....
https://forum.xda-developers.com/ga...t/recovery-twrp-galaxy-note-8-exynos-t3674036
Kalm_Traveler said:
Exynos models had root several days ago. I'm using SuperSU at the moment.
Click to expand...
Click to collapse
Is lacky patcher working with super su ?
me7tarfeek said:
I did not install Magisk xposed module.. I used the normal stand alone xposed... It worked perfect with no issues at all. My device is N950FD....
Click to expand...
Click to collapse
Which root do you have—SuperSU or Magisk? I have Magisk, so tried with 26-07-17-xposed-systemless-v87-sdk25-by-PurifyOS.zip but that throws me into a bootloop directly?
How did you proceed chronologically?
First the Xposed apk (which one?), then flash the Purify zip? Did you wipe anything before or after, data or cache? I've read many conflicting reports, since you've done it should be possible to replicate it…
白い熊 said:
Which root do you have—SuperSU or Magisk? I have Magisk, so tried with 26-07-17-xposed-systemless-v87-sdk25-by-PurifyOS.zip but that throws me into a bootloop directly?
How did you proceed chronologically?
First the Xposed apk (which one?), then flash the Purify zip? Did you wipe anything before or after, data or cache? I've read many conflicting reports, since you've done it should be possible to replicate it…
Click to expand...
Click to collapse
I flashed Magisk 14 root... Restarted the device to check root... Then Installed xposed apk (XposedInstaller_by_dvdandroid_09_09_17)... Then flashed the above xposed framework. Restarted the device to check xposed, then installed modules...
No wipe at all... The device restarted normaly with no issue..
Good luck
me7tarfeek said:
I flashed Magisk 14 root... Restarted the device to check root... Then Installed xposed apk (XposedInstaller_by_dvdandroid_09_09_17)... Then flashed the above xposed framework. Restarted the device to check xposed, then installed modules...
No wipe at all... The device restarted normaly with no issue..
Good luck
Click to expand...
Click to collapse
Does this break Android Pay?
vinokirk said:
Does this break Android Pay?
Click to expand...
Click to collapse
I think so. As far as I know, root breaks Android Pay.
We do not have it here so I can not be sure...
Hey guys,
Trying to install the systemless XPosed for Nougat on my Note 8, but for some reason, after installation, it stops my 256GB Exynos Note 8 from booting up. Was able to recover it by running the Magisk uninstaller via TWRP.
Noticed that on the official XPosed thread, it states that it'll 'cause boot loop issues on stock Samsung ROM, but on the Systemless XPosed Page, it claims the SDK 24 and 25 are universal, so, what's wrong?
Any suggestions on getting systemless XPosed working on my Exynos Note 8 with Nougat? I especially want the systemless variant as it allows easy on/off whenever I'm going shopping and want to use Android Pay instead of having to uninstall all modules.

SafetyNet Check fails

Hey guys,
I've got a problem with the SafetyNet check.
Yesterday I rooted my Galaxy S8 and installed the Magisk Manager App und the newest version Magisk v14
Now I wanted to install Snapchat, but I can't due to the fact that the safetynet check fails.
I already reinstalled Magisk, unchecked,checked the box with magisk hide, checked the box for google play and snapchat in magisk hide.
I don't know what to do anymore. Do you guys have any tips for me please?
SpecialStar said:
Hey guys,
I've got a problem with the SafetyNet check.
Yesterday I rooted my Galaxy S8 and installed the Magisk Manager App und the newest version Magisk v14
Now I wanted to install Snapchat, but I can't due to the fact that the safetynet check fails.
I already reinstalled Magisk, unchecked,checked the box with magisk hide, checked the box for google play and snapchat in magisk hide.
I don't know what to do anymore. Do you guys have any tips for me please?
Click to expand...
Click to collapse
Try the universal safetynet patch that's in the magisk forum somewhere. I would link it but I'm in my phone atm and out.
Edit: here https://forum.xda-developers.com/apps/magisk/xiaomi-safetynet-fix-t3600431 - install it in twrp, not through magisk manager
Also, next time please post your magisk log here so that someone who knows what they are doing can look at it
I have seen someone else's log here, suggesting that you may need a patched or custom kernel for it to be supported. I don't have a Samsung phone so I can't confirm though.
Also: https://forum.xda-developers.com/apps/magisk/guide-magisk-troubleshooting-t3641417
Thank you, I uninstalled xposed framework and used the unsu script and it worked for me.
But now I've got another question. How do i get xposed work for my phone without failing the safetynet check?
I wanted to install snappref but it won't work this way
SpecialStar said:
Thank you, I uninstalled xposed framework and used the unsu script and it worked for me.
But now I've got another question. How do i get xposed work for my phone without failing the safetynet check?
I wanted to install snappref but it won't work this way
Click to expand...
Click to collapse
For the moment there is no such possibility if Xposed is installed on Nougat to SafetyNet failed, without Xposed is SafetyNet Pass Green.
Ok thank you, where can I read if it is available?
You Can install universal safetynet fix on recovery mode
SpecialStar said:
Hey guys,
I've got a problem with the SafetyNet check.
Yesterday I rooted my Galaxy S8 and installed the Magisk Manager App und the newest version Magisk v14
Now I wanted to install Snapchat, but I can't due to the fact that the safetynet check fails.
I already reinstalled Magisk, unchecked,checked the box with magisk hide, checked the box for google play and snapchat in magisk hide.
I don't know what to do anymore. Do you guys have any tips for me please?
Click to expand...
Click to collapse

Categories

Resources