Database Develop

Bricked

HI mates,
I flashed a image and now my phone won't boot its not going into recovery neither its booting into rom or into boat loader (power+vol up) what should i do it shows logo only and reboots automatically to the same screen, attached via usb not detected by pc.

FarrukhQadri said:
HI mates,
I flashed a image and now my phone won't boot its not going into recovery neither its booting into rom or into boat loader (power+vol up) what should i do it shows logo only and reboots automatically to the same screen, attached via usb not detected by pc.
Click to expand...
Click to collapse
First this thread go to [Q&A]
Have you flasht a wrong kernel ? Try to flash stock Boot.IMG for your rom .
If that is not helping place full Rom as a sample (B609) on youre external sdcard under dload/ and that Boot youre fon with all three buttons
Sent from my p7_l10 using XDA Free mobile app

Araca said:
First this thread go to [Q&A]
Have you flasht a wrong kernel ? Try to flash stock Boot.IMG for your rom .
If that is not helping place full Rom as a sample (B609) on youre external sdcard under dload/ and that Boot youre fon with all three buttons
Sent from my p7_l10 using XDA Free mobile app
Click to expand...
Click to collapse
yes i think i have flashed wrong image.
i have my rom installed in the phone which is stock based so i should flash its image? i would be thankful for your help.

FarrukhQadri said:
yes i think i have flashed wrong image.
i have my rom installed in the phone which is stock based so i should flash its image? i would be thankful for your help.
Click to expand...
Click to collapse
Connect your device to the PC, and ADB is gonna be accessible for 2-4 seconds while the logo is loading (bootanimation), by that time you can flash recovery using fastboot flash recovery recovery.img or simply enter bootloader mode by (i think) holding power up + vol up + vol down buttons. After you have access to the recovery, things are gonna be easier as you can flash ROM's, kernels etc etc. (either via ADB or the recovery itself)
Best regards,
James

Daentrod said:
Connect your device to the PC, and ADB is gonna be accessible for 2-4 seconds while the logo is loading (bootanimation), by that time you can flash recovery using fastboot flash recovery recovery.img or simply enter bootloader mode by (i think) holding power up + vol up + vol down buttons. After you have access to the recovery, things are gonna be easier as you can flash ROM's, kernels etc etc. (either via ADB or the recovery itself)
Best regards,
James
Click to expand...
Click to collapse
let me try this ... bro after getting bricked its not even charging .

Resolved
Thank you Everyone for helping and guiding issue is resolved your help is always appreciated...

how?
How?

same problem here with my P7 L00 , forum should work both ways, would be nice if you could post solution... tks

Most likely the solution from #4.
Also note that you can easily enter bootloader mode by
a.) disconnecting device and powering it off completely
b.) holding down VOL DOWN and connecting device until it boots into bootloader mode
(Similarly, if you hold down VOL UP you can enter recovery.)
In bootloader mode, flash the correct recovery, then you can do the three button update with update.app in the dload folder.

g4b3rm4n said:
Most likely the solution from #4.
Also note that you can easily enter bootloader mode by
a.) disconnecting device and powering it off completely
b.) holding down VOL DOWN and connecting device until it boots into bootloader mode
(Similarly, if you hold down VOL UP you can enter recovery.)
In bootloader mode, flash the correct recovery, then you can do the three button update with update.app in the dload folder.
Click to expand...
Click to collapse
ok tks !, that s actually what I did, the only thing is that I m still stucked cause I cannot get get into forced update by pressing the 3 buttons : saved dload folder in otg usb but when I press 3 buttons I get back to recovery ?

maurolm said:
ok tks !, that s actually what I did, the only thing is that I m still stucked cause I cannot get get into forced update by pressing the 3 buttons : saved dload folder in otg usb but when I press 3 buttons I get back to recovery ?
Click to expand...
Click to collapse
Did you flash the correct stock recovery for the device? Not having the correct recovery might just throw you into the recovery instead of flashing the software. Also, the recovery should be unzipped inside the dload folder (some people forget this).

tks! using TWRP 2.8.7.0 that runs ok on EMUI 3.0 - not original recovery - maybe that s why then I can t get to force download?

maurolm said:
tks! using TWRP 2.8.7.0 that runs ok on EMUI 3.0 - not original recovery - maybe that s why then I can t get to force download?
Click to expand...
Click to collapse
When you flash stock recovery, make sure that you're using exact version of the ROM.
Like if you had B609 you should use B609 recovery image and no other!
I made the mistake of using B621 recovery image on a B609, thinking "well it's the same, both are KitKat and both are EMUI 3.0" but NO! I was wrong.
Don't make the same mistake i did.
Let me know if you get stuck

maurolm said:
tks! using TWRP 2.8.7.0 that runs ok on EMUI 3.0 - not original recovery - maybe that s why then I can t get to force download?
Click to expand...
Click to collapse
Yes, that is the problem - *only* stock recovery can install stock ROMs and updates! Depending on your base version, you should install the recovery for the BXXX ROM (e.g.: if you are on CWM flashable B609, flash the recovery for B609, etc.).

tks all, I will flash stock recory and post back
follow up: TWRP was the issue, flashed stock recovery and was good to go...running EMUI 3.1 android 5.1 already, tks for all!

Can't enter TWRP, stuck at "Your device is booting now..."

Hello,
i unlocked my Bootloader and flashed twrp using adb,
but when i now try to enter twrp i get to the screen:
Your device has been unlocked and
can't be trusted.
To learn more,visit:
a useless link blabla
Your device is booting now....
Click to expand...
Click to collapse
and there i get stuck because is does not boot ,
i waited for 10min but nothing happend.
I can still boot the phone normally by entering the fastboot mode and rebooting it from there, but i can't use twrp to install cm13 .
I tried this https://forum.xda-developers.com/p9/how-to/trouble-entering-twrp-t3541212 but it did not work.

Just press volume down and power button to enter fast boot, then flash stock recovery, reboot , afterwards try unlock bootloader and try twrp recovery again, for ease use srk tool 2.0

I just solved the problem, somehow i was using the wrong TWRP version because my P9 is running nougat but thank you for the answer

And what version works with Nougat?

henryco11 said:
And what version works with Nougat?
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-8/how-to/twrp-nougat-edition-t3504140
sadly you're not able to flash anything except some special supersu version, because of some reasons (the missing decryption support i guess?).

SCRAFI said:
I just solved the problem, somehow i was using the wrong TWRP version because my P9 is running nougat but thank you for the answer
Click to expand...
Click to collapse
and how you solved pleaseeeee

mendja said:
and how you solved pleaseeeee
Click to expand...
Click to collapse
The answer to your question is in the post that you quoted... lol. Try reading it again.

a read again.
but I can not come to the bootloader or fastboot. nothing whatever to press the volume up or down with the power or just repeats
your device has bean unlocked
cant trust
visit ....ballal
your device booting now
So if you have an idea that with these images on the display get into fastboot or something else. help you. thank you

mendja said:
a read again.
but I can not come to the bootloader or fastboot. nothing whatever to press the volume up or down with the power or just repeats
your device has bean unlocked
cant trust
visit ....ballal
your device booting now
So if you have an idea that with these images on the display get into fastboot or something else. help you. thank you
Click to expand...
Click to collapse
same here. did you find a solution?

Unable to boot in TWRP 3.1.0-0, hanging at "Your device is booting now......"
eelc said:
same here. did you find a solution?
Click to expand...
Click to collapse
Has anyone found a solution to this yet?
Regards

First think whats your device.
Some of you here flashing different recovery or are in different device forum.

salineBoy said:
Has anyone found a solution to this yet?
Regards
Click to expand...
Click to collapse
hey, i have.

dkionline said:
First think whats your device.
Some of you here flashing different recovery or are in different device forum.
Click to expand...
Click to collapse
Found a way around the problem: I downloaded Magisk, used that to unroot. Enter recovery via Rom Manager. Trying to boot to recovery using volume + and power button only work 10 - 15% of the time.

am on PRA-LX1C432b106, dual sim edition i've unlocked the boot loader and receive your device is unlocked and cannot be trusted . to learn more visit... your device is booting now, but he do not boot. After a complete drain of the battery with the charger plugged in i can boot in software. but i do not have a keyboard option and any google play store account. cannot format wipe because miss of the keyboard . the question it is OK to install VNS-L31 software firmware on my device? And what version to put ?

i want apply themes but not working .. i know it problem is hw init is missing . so i unzip speacseas c636 for update.app and flash dload method .. but it goes to bootloop .. i flash mm stock update.app also not working .. try flash rollback package .. bootloop and cant enter recovery and erecovery.. my fastboot is frp lock and phone locked .. i see at screen " connect hisuite " at last try it uncompatible .. so what i could do for saving my phone life ?

salineBoy said:
Found a way around the problem: I downloaded Magisk, used that to unroot. Enter recovery via Rom Manager. Trying to boot to recovery using volume + and power button only work 10 - 15% of the time.
Click to expand...
Click to collapse
Button combo works everytime if u do it right.
Hold both keys until the Huawei Logo dissappear and it will work.

SCRAFI said:
I just solved the problem, somehow i was using the wrong TWRP version because my P9 is running nougat but thank you for the answer
Click to expand...
Click to collapse
can you lead me into the version of the twrp you used ? i have nougat too and installed the latest twrp there with no luck

you used orginal recovery from twrp. me? rom manager download this recovery. Unlock bootloader again. Flash b136 from twrp 3.0.2.0 after flas b136 with dload folder after b182 and b210 after unlock bootloader again and update to nougat.
Wysłane z mojego EVA-L09 przy użyciu Tapatalka

I unlocked bootloader, installed twrp using fastboot and then as you enter reboot command, you need to hold volume up and power button and hold down to avoid going to standard recovery. It took several attempts to do it (re-installing twrp every time), but worked on C432383 which is Nougat

Well it looks like you actually have to hold power + volume up when the phone is off and release all keys 0.5-1 seconds after the screen lights up with Huawei logo / text to boot into the custom recovery or else it will just boot Huawei eRecovery...

Please help me I feel so frustrated.

My device is Mi Max 2 today I tried flashing some custom rom which is because yesterday it was normal but it suddenly restarted when I tried booting it up it went to recovery mode btw my recovery mode is TWRP so I tried to just flash a rom again but after its done flashing It keeps booting into TWRP so I was searching online and decided to go back to stock I used the Miflash but after it successfully flashing again This time I can no longer access bootloader my volume up does not work anymore only down and power and im back to stock recovery mode tried accessing MiPcSuite but to still no avail. Please help im seriosly sad like frustrated beacuse I have been trying to find for a fix since yesterday.
Is my volume up broken? is it the reason why I can't access the bootloader. everything went south since yesterday.
I would like to add that the power and the volume buttons where acting funny yeterday when it was doing just fine could it be my volume button but why does it keep booting on TWRP Thinking about it I was getting out of the bath could have damage the volume buttons or something

Is your volume down button is working ??
please help me 12 said:
My device is Mi Max 2 today I tried flashing some custom rom which is because yesterday it was normal but it suddenly restarted when I tried booting it up it went to recovery mode btw my recovery mode is TWRP so I tried to just flash a rom again but after its done flashing It keeps booting into TWRP so I was searching online and decided to go back to stock I used the Miflash but after it successfully flashing again This time I can no longer access bootloader my volume up does not work anymore only down and power and im back to stock recovery mode tried accessing MiPcSuite but to still no avail. Please help im seriosly sad like frustrated beacuse I have been trying to find for a fix since yesterday.
Is my volume up broken? is it the reason why I can't access the bootloader. everything went south since yesterday.
I would like to add that the power and the volume buttons where acting funny yeterday when it was doing just fine could it be my volume button but why does it keep booting on TWRP Thinking about it I was getting out of the bath could have damage the volume buttons or something
Click to expand...
Click to collapse
By using volume down and power you can boot to fastboot and then try flashing the Rom using fastboot method
Second if you find other max 2 , you can restore the partition from other max 2, partition you have to restore are boot , system, system image, cust ( dont restore efs ,firmware partitions

beingtejas said:
By using volume down and power you can boot to fastboot and then try flashing the Rom using fastboot method
Second if you find other max 2 , you can restore the partition from other max 2, partition you have to restore are boot , system, system image, cust ( dont restore efs ,firmware partitions
Click to expand...
Click to collapse
Sorry for late reply Im stuck at the Mi-Recovery 3.0 I cant access fastboot. only recovery

Did you unlocked the bootloader
please help me 12 said:
Sorry for late reply Im stuck at the Mi-Recovery 3.0 I cant access fastboot. only recovery
Click to expand...
Click to collapse
Did you tried volume - and power button to get into fastboot.
If your device boots you can also try adb method to boot into bootloader ( fastboot)

beingtejas said:
Did you tried volume - and power button to get into fastboot.
If your device boots you can also try adb method to boot into bootloader ( fastboot)
Click to expand...
Click to collapse
I did but it just boots me up into fastboot mode btw I got this into service center and they tried using EDL and flash a rom but after flashing it still only boots into recovery mode

If it boots into fastboot mode you can use commands to flash stock miui rom from ther
please help me 12 said:
I did but it just boots me up into fastboot mode btw I got this into service center and they tried using EDL and flash a rom but after flashing it still only boots into recovery mode
Click to expand...
Click to collapse
I have the whole detailed process before , you will find if you search the thread..

beingtejas said:
I have the whole detailed process before , you will find if you search the thread..
Click to expand...
Click to collapse
Well the thing is after flashing the official rom it still boots back into recovery mode.

Then you have to try flashing again
please help me 12 said:
Well the thing is after flashing the official rom it still boots back into recovery mode.
Click to expand...
Click to collapse
If you can.. tell one thing , do your device is able to boot in fastboot ??

beingtejas said:
If you can.. tell one thing , do your device is able to boot in fastboot ??
Click to expand...
Click to collapse
heres an update I was somehow able to boot into fastboot mode and installed TWRP and then I tried to flash ROM's into it it says sucessfully but it boots me right into TWRP again.

beingtejas said:
If you can.. tell one thing , do your device is able to boot in fastboot ??
Click to expand...
Click to collapse
is there somewhere we can chat?

https://chat.stackexchange.com/rooms/94776/discussion-on-question-by-need-help-mi-max-2-soft-bricked check this up theres also one guy whos helping if you want to help just use this.

MESSED UP!!!!! TWRP FLASH FAILED, STUCK AT AWB FAIL

Hey fellow members,
I tried flashing TWRP on my M31 as anyone would, but I did not have a patched vbmeta file. I did it anyway because I thought I'd be able to restore it using ODIN no matter what. Or at least it was supposed to. But ODIN doesn't recognise the phone anymore. And any idea on how to get the phone to boot into normal ODIN download mode?

code_blanc said:
Hey fellow members,
I tried flashing TWRP on my M31 as anyone would, but I did not have a patched vbmeta file. I did it anyway because I thought I'd be able to restore it using ODIN no matter what. Or at least it was supposed to. But ODIN doesn't recognise the phone anymore. And any idea on how to get the phone to boot into normal ODIN download mode?
Click to expand...
Click to collapse
Press all buttons until it force reboots
As soon as black screen comes instantly release all buttons and power + volume down and connect to PC this should boot into download mode and as usually Flash ur stock rom

Thank you for the reply. I figured it out shortly after posting this question. Thanks for your help..

can someone help me also I cant get to the download mod and only stuck at Samsung logo with caution of this phone is not running Samsung official.

i tried this one but it didnt work
LMAO-guy said:
Press all buttons until it force reboots
As soon as black screen comes instantly release all buttons and power + volume down and connect to PC this should boot into download mode and as usually Flash ur stock rom
Click to expand...
Click to collapse

lawrenzdr said:
i tried this one but it didnt work
Click to expand...
Click to collapse
If this method didn't work, maybe it has a hardware issue so check ur phone in any repair shop

lawrenzdr said:
can someone help me also I cant get to the download mod and only stuck at Samsung logo with caution of this phone is not running Samsung official.
Click to expand...
Click to collapse
There must have been written something like "you are not using official software press the power key to continue".
So, Just press the power key.

LMAO-guy said:
Press all buttons until it force reboots
As soon as black screen comes instantly release all buttons and power + volume down and connect to PC this should boot into download mode and as usually Flash ur stock rom
Click to expand...
Click to collapse
mine also same problem done above thing did'nt work, could u help my problem
Error verifying vbmeta image: invalid vbmeta header (6) VBMETA M315FXXU3CVH1, 54678140R
Trying to root my galaxy M31 by flashing a TWRP recovery file but I got this above error!... Finally end up with... Neither I can restart phone (volume down + power) coming to same screen nor enter to TWRP recovery mode (volume up + power) also...
forum.xda-developers.com

Root sonrası parmakızı çalışmıyor, bu sorun nasıl çozebilirim
Fingerprint does not work after root, how can I solve this problem?

Roottan sonra parmak izi çalışmıyor, bu sorunu nasıl çözebilirim?Fingerprint does not work after root, how can I solve this problem?

zygisk bricking phones

Im using a infinix hot 10S (X689B), that i recently rooted. Just today when i opened magisk i enabled zygisk anti detection and it told me to restart device, when i did restart my device it got stuck in the XOS logo and i waited for quite a while and it didnt open, when i formatted my device thru recovery mode, the problem still persists. I have tried flashing again but its not working anymore. My phone is currently bricked, no recovery, no OS. Please help me with my problem as i am still a 13 year old and i dont have money to repair my phone.

infiniUser1008 said:
Im using a infinix hot 10S (X689B), that i recently rooted. Just today when i opened magisk i enabled zygisk anti detection and it told me to restart device, when i did restart my device it got stuck in the XOS logo and i waited for quite a while and it didnt open, when i formatted my device thru recovery mode, the problem still persists. I have tried flashing again but its not working anymore. My phone is currently bricked, no recovery, no OS. Please help me with my problem as i am still a 13 year old and i dont have money to repair my phone.
Click to expand...
Click to collapse
Boot to stock recovery and do the Wipe Data/Factory Reset
Don't worry, it's not hard and doesn't cost you anything for repair, i've done it everytime

Stillhard said:
Boot to stock recovery and do the Wipe Data/Factory Reset
Don't worry, it's not hard and doesn't cost you anything for repair, i've done it everytime
Click to expand...
Click to collapse
thats the problem, whenever i try booting to recovery nothing is showing its just a black screen

infiniUser1008 said:
thats the problem, whenever i try booting to recovery nothing is showing its just a black screen
Click to expand...
Click to collapse
how did you try to boot the recovery?

i boot recovery by power button and volume up, but nothing showing

infiniUser1008 said:
i boot recovery by power button and volume up, but nothing showing
Click to expand...
Click to collapse
you can try to boot it over adb and fastboot. That you try to boot the image.

NikOverflow said:
you can try to boot it over adb and fastboot. That you try to boot the image.
Click to expand...
Click to collapse
can i get a tutorial on that?

infiniUser1008 said:
can i get a tutorial on that?
Click to expand...
Click to collapse
yeah.
1. Download the recovery image on your pc.
2. Boot into fastboot mode.
3. enter "fastboot boot image-file.img"

NikOverflow said:
yeah.
1. Download the recovery image on your pc.
2. Boot into fastboot mode.
3. enter "fastboot boot image-file.img"
Click to expand...
Click to collapse
i cant open recovery how do i open fastboot?

infiniUser1008 said:
i cant open recovery how do i open fastboot?
Click to expand...
Click to collapse
power button + volume down

just reflash stock firmware and done

tutibreaker said:
just reflash stock firmware and done
Click to expand...
Click to collapse
yes that should normally work.

tutibreaker said:
just reflash stock firmware and done
Click to expand...
Click to collapse
Whenever i try flashing it says verified boot is enabled, how do i fix this?