Database Develop

[RECOVERY] CWM Normal & Touch Recovery 6.0.1.2

As i saw and received some pm asking about this new version that Koush doesnt have time to rebuild it, i´ve done myself and its working like a charm in our p990 devices.
All credits to Koush i´ve just compiled from cm sources
Edit: Update to cwm v6.0.1.2
Edit2: Uploaded Normal Recovery for those that dont want to use touch or doesnt use ICS kernels.

Kashamalaga said:
As i saw and received some pm asking about this new version that Koush doesnt have time to rebuild it, i´ve done myself and its working like a charm in our p990 devices.
All credits to Koush and Rusty! i´ve just compiled from cm sources
Mediafire Mirror:
Edit mirror off until i solve a unpleasure bug that always boot recovery partition
Click to expand...
Click to collapse
It's a frequent bug with cwm...
Perhaps this can help you we had this problem on my tablet: http://forum.xda-developers.com/showthread.php?t=1601942

Nice work! CWM 6 Touch was long overdue!

Striatum_bdr said:
It's a frequent bug with cwm...
Click to expand...
Click to collapse
Thanks for the info, i found the bug on postrecoveryboot
tonyp said:
Had tried it before, didn't work.
Did you use the online builder?
Didn't spend too much time into it though, I'm now with twrp.
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Yes but like you know repo from koush are clear from p990 files so i already done from my own cm source.
Its working like a charm and incremental backups rocks, just 27mb for example a complete backup forget it about every backup 1GB

Not able to find incremental backup.

parthabhatta said:
Not able to find incremental backup.
Click to expand...
Click to collapse
Dear,
if you dont touch nothing by default dpu extension files gives you that. For example if you had a old backup just backup does a small update backup as in this screenshot.
Picture: http://i47.tinypic.com/11vp6x5.jpg

Great concept. Got to understand the thing.

will it change the previous backup? can we still restore?

Does it have the same bug as the previous one that was corrupting cache partition?

mind_challenge said:
Does it have the same bug as the previous one that was corrupting cache partition?
Click to expand...
Click to collapse
fixed.

orbital_71 said:
will it change the previous backup? can we still restore?
Click to expand...
Click to collapse
yes still can restore old backups

Kashamalaga said:
fixed.
Click to expand...
Click to collapse
Any other known bugs?

orbital_71 said:
will it change the previous backup? can we still restore?
Click to expand...
Click to collapse
mind_challenge said:
Any other known bugs?
Click to expand...
Click to collapse
No

parthabhatta said:
Great concept. Got to understand the thing.
Click to expand...
Click to collapse
This is further to my quoted post.
I made two backups of my ROM.
The first one to external card (I am on stock v20h modded by Flix) where I had previously two full backups stored - made with regular CWM. Out of the two full backups - one is of the default FROYO ROM when I bought the phone and another is of some other Custom ROM not related to v20h. Now this CWM made a backup of only 28+ mb.
The second backup I made to internal card where previously no CWM Backup existed. But again the v20h backup created by this CWM 6 (touch) which is only for 28+mb.
Its very good since so little space is being taken. But wherefrom CWM is taking its reference as the main backup on which this incremental backup is created?
I have no problems with this but only for the sake of curiosity I am wanting to know the details of this great concept.
I have still not tried RESTORE. I will try that from the backup created in my internal memory of only 28+mb and report back.

parthabhatta said:
This is further to my quoted post.
I made two backups of my ROM.
The first one to external card (I am on stock v20h modded by Flix) where I had previously two full backups stored - made with regular CWM. Out of the two full backups - one is of the default FROYO ROM when I bought the phone and another is of some other Custom ROM not related to v20h. Now this CWM made a backup of only 28+ mb.
The second backup I made to internal card where previously no CWM Backup existed. But again the v20h backup created by this CWM 6 (touch) which is only for 28+mb.
Its very good since so little space is being taken. But wherefrom CWM is taking its reference as the main backup on which this incremental backup is created?
I have no problems with this but only for the sake of curiosity I am wanting to know the details of this great concept.
I have still not tried RESTORE. I will try that from the backup created in my internal memory of only 28+mb and report back.
Click to expand...
Click to collapse
Its use the sdcard/clockworckmod/blobs files to check and recover if an error appears so its better to get all the backups in your sdcard, i´´ never use internal memory for do backups, and like you said its take that as reference from the blobs

Kashamalaga said:
Its use the sdcard/clockworckmod/blobs files to check and recover if an error appears so its better to get all the backups in your sdcard, i´´ never use internal memory for do backups, and like you said its take that as reference from the blobs
Click to expand...
Click to collapse
Thanks. Now I understand. Once it stores all necessary information in "BLOBS" folder (which is of 790+mb in my case) and makes backups of <30mb each time I backup a installed ROM. Good one.

Tested it now, everything works perfect.

mind_challenge said:
Tested it now, everything works perfect.
Click to expand...
Click to collapse
Thanks for your testing :good:

Is it normal that backup needs a lot more time than wih CWM 5?

Impact7 said:
Is it normal that backup needs a lot more time than wih CWM 5?
Click to expand...
Click to collapse
Just on first time use when you need to create blobs after that runs awesome! :silly:

[GUIDE][ROOT][RECOVERY][4.4.2] Lenovo A3500-H

I am not responsible for bricked devices!
Hi!
I found working method for root Lenovo A3500-H!
I don't know how it's with A3500-HV!
I spent a lot of time for searching informations how to root this device and i have found it!
Original topic: http://4pda.ru/forum/index.php?showtopic=590712
But I translated it to english
So, let's go
1. INSTALLING RECOVERY
1. Download attachment.
2. Turn off your device.
3. Unpack Recovery.zip
4. Run Flash_tool.exe with Admin Rights
3. Chose Scatter-Loading and choose MT6582_Android_scatter.txt (in Recovery folder)
4. Now you will see checekd only one checkbox - recovery, if not click on it and choose recovery.img
5. Press Download
6. Plug your device to PC.
7. Wait few seconds.
8. Have CWM on your device
2. ROOTING
1. Download newest version of SuperSU (http://forum.xda-developers.com/apps/supersu). Now it's 2.02 ( http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip)
2. Put in on SD-CARD
3. Turn off your device and press VOL DOWN + VOL UP + POWER for about 7 seconds.
4. Apply package.
5. Have rooted tablet
If you want u can give me tip for a beer - [email protected] - I will be very cheerful
Donors:
Empty list
Sorry for my english if something wrong.

Tested on a A7-40 (3500-FL) (8 Gb/no GSM), and found for good
Thanks
:good:

bobais said:
Tested on a A7-40 (3500-FL) (8 Gb/no GSM), and found for good
Thanks
:good:
Click to expand...
Click to collapse
What android version do you have?

cshadow said:
What android version do you have?
Click to expand...
Click to collapse
Lenovo´s latest 4.4.2

Thx for the info, I also have A3500-FL, rooted but still on 4.2.2.
Can you compare how 4.4.2 works for you?
I read a couple of posts where people are complaining about it.

cshadow said:
Thx for the info, I also have A3500-FL, rooted but still on 4.2.2.
Can you compare how 4.4.2 works for you?
I read a couple of posts where people are complaining about it.
Click to expand...
Click to collapse
No problems so far, fast and reliable. Everything like it should be.

So it's working on a3500fl (a7-40)?

bobais said:
Tested on a A7-40 (3500-FL) (8 Gb/no GSM), and found for good
Thanks
:good:
Click to expand...
Click to collapse
Yes, it works.

Thanks, i'll try ASAP

przemus19 said:
Thanks, i'll try ASAP
Click to expand...
Click to collapse
Attached the USB drivers for the boot mode. Brief german installation guide included.

Koli96 said:
I am not responsible for bricked devices!
Hi!
I found working method for root Lenovo A3500-H!
I don't know how it's with A3500-HV!
I spent a lot of time for searching informations how to root this device and i have found it!
Original topic: http://4pda.ru/forum/index.php?showtopic=590712
But I translated it to english
So, let's go
1. INSTALLING RECOVERY
1. Download attachment.
2. Turn off your device.
3. Unpack Recovery.zip
4. Run Flash_tool.exe with Admin Rights
3. Chose Scatter-Loading and choose MT6582_Android_scatter.txt (in Recovery folder)
4. Now you will see checekd only one checkbox - recovery, if not click on it and choose recovery.img
5. Press Download
6. Plug your device to PC.
7. Wait few seconds.
8. Have CWM on your device
2. ROOTING
1. Download newest version of SuperSU (http://forum.xda-developers.com/apps/supersu). Now it's 2.02 ( http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip)
2. Put in on SD-CARD
3. Turn off your device and press VOL DOWN + VOL UP + POWER for about 7 seconds.
4. Apply package.
5. Have rooted tablet
If you want u can donate me on PayPal - [email protected] - I will be very cheerful
Sorry for my english if something wrong.
Click to expand...
Click to collapse
Thanks a lot.
It does work with A3500 HV as well on the latest Kitkat FW.
Great!

sanguinevn said:
Thanks a lot.
It does work with A3500 HV as well on the latest Kitkat FW.
Great!
Click to expand...
Click to collapse
Is this working with A3500-F .. only wifi?

sanguinevn said:
Thanks a lot.
It does work with A3500 HV as well on the latest Kitkat FW.
Great!
Click to expand...
Click to collapse
are you sure because the partition and the kernal are different it might work in the graphical way but can you backup and most importantly restore be carefull might brick your device if you check please tell soon......will be very greatfull as i also have a LenovoA3500-HV

anandisrocking007 said:
are you sure because the partition and the kernal are different it might work in the graphical way but can you backup and most importantly restore be carefull might brick your device if you check please tell soon......will be very greatfull as i also have a LenovoA3500-HV
Click to expand...
Click to collapse
It was actually risky to try this root method for my aunt's A3500 HV as I had just bought it for her on 24 Sep 2014.
Originally I bought the tablet with android 4.2.2 and it was get rooted by RootGenius__lenovohome v 1.9.6. When I found this thread, I updated the tablet into FW version A3500hv_a442_01_32_140805 (android 4.4.2) by flashing tool. When it was successful updated to this version, I was noticed via OTA a newer version, FW A3500-HV_A442_01_35_140911 immediately after the first boot. I went ahead with downloading and updating the newer version by OTA. I felt it was so much better with the latest version with rapid lock GPS, better screen display quality and better sound quality as well.
As I was afraid to get brick the tablet in this thread, I tried to root the tablet again with RootGenius__lenovohome v 1.9.6 again but no lucky. As the result I decided to give me a chance to try the root method in this thread for A3500 HV with my own risk as I thought it can be unbrick by re-flashing a FW. Luckily it was rooted successfully with the instruction in this thread. It was a magic. :good::good::good:
There you go some screenshots.

horhokokki said:
Is this working with A3500-F .. only wifi?
Click to expand...
Click to collapse
I don't own this device unfortunately. Sorry.

sanguinevn said:
It was actually risky to try this root method for my aunt's A3500 HV as I had just bought it for her on 24 Sep 2014.
Originally I bought the tablet with android 4.2.2 and it was get rooted by RootGenius__lenovohome v 1.9.6. When I found this thread, I updated the tablet into FW version A3500hv_a442_01_32_140805 (android 4.4.2) by flashing tool. When it was successful updated to this version, I was noticed via OTA a newer version, FW A3500-HV_A442_01_35_140911 immediately after the first boot. I went ahead with downloading and updating the newer version by OTA. I felt it was so much better with the latest version with rapid lock GPS, better screen display quality and better sound quality as well.
As I was afraid to get brick the tablet in this thread, I tried to root the tablet again with RootGenius__lenovohome v 1.9.6 again but no lucky. As the result I decided to give me a chance to try the root method in this thread for A3500 HV with my own risk as I thought it can be unbrick by re-flashing a FW. Luckily it was rooted successfully with the instruction in this thread. It was a magic. :good::good::good:
There you go some screenshots.
Click to expand...
Click to collapse
Thanks for the reply well I new that they had put some extra security in the new kitkat version so that you can not root but when you use the recovery then you are installing the su file when android OS is is off so the security can't catch you
All right one last question have you tried making a nandroid backup and restoring it up until now if so and successfully please say so
Also if you do not know what a nandroid backup is it is just a backup of an entire operating system and can be used if the system gets bricked and it is totally harmless all it takes is 5 min since you had done the dangerous part and if that works can you check out nandroid restore because if the backup worked in success then there is a 97% chance that clockworkmod restore works o and there won't be any loss of data because you are doing a restore of all the data you backed up seconds ago
If there is a single error message after even after the backup and restore is finished please report it
The backup is totally harmless so if you can just check that I and all the HV version around the world would be very great full thanks in advance.......:fingers-crossed:

anandisrocking007 said:
Thanks for the reply well I new that they had put some extra security in the new kitkat version so that you can not root but when you use the recovery then you are installing the su file when android OS is is off so the security can't catch you
All right one last question have you tried making a nandroid backup and restoring it up until now if so and successfully please say so
Also if you do not know what a nandroid backup is it is just a backup of an entire operating system and can be used if the system gets bricked and it is totally harmless all it takes is 5 min since you had done the dangerous part and if that works can you check out nandroid restore because if the backup worked in success then there is a 97% chance that clockworkmod restore works o and there won't be any loss of data because you are doing a restore of all the data you backed up seconds ago
If there is a single error message after even after the backup and restore is finished please report it
The backup is totally harmless so if you can just check that I and all the HV version around the world would be very great full thanks in advance.......:fingers-crossed:
Click to expand...
Click to collapse
Actually I'm pretty sure that KK FW of A3500H does work on A3500HV then I think that the root method will work on A3500HV either. The only different thing between A3500H and A3500HV is call function, I think so.
I did try a Nandroid backup on FW 4.2.2 actually by using the recovery in this thread before upgrading to KK FW. It took about 10 minutes less for the backup procedure to be done without any error and it was written on CMW/BACKUP folder on external SD card (16GB was used). I noticed that the backup steps were similar to any Nandroid backup on CWM recovery: backup boot, recovery, system then data... later generating MD5 checksum. I haven't tried to restore this backup as the update KK FW works really great.
I also tried to flash zip FW (the latest one with build number ​ A3500-HV_A442_01_35_140911) which was found on this link https://yadi.sk/d/KY44k2XDba5Mw from the Russian Lenovo Forum when the tablet was on FW 4.2.2. However, it was not successfull as the recovery said that there was nothing found on the zip to flash. I had no idea about it. Maybe we cannot upgrade to KK by this way when on JB FW or this CWM recovery (which is customized for A3500) can't be used to flash rom. Then I have to upgrade it by flashing tool and FW found on this link: http://lenovo-forums.ru/topic/7809-прошивка-lenovo-a7-a3500hv-a442-01-32-140805-row-call/
Link to the forum: http://lenovo-forums.ru/forum/289-прошивки-lenovo-a7-a3500/
The tablet is not with me now as I just bought it for my aunt so I don't have a chance to try Nandorid backup when it is on KK FW. If there is a chance to do so, I will report it shortly.
I think it would be great if we could have flashable custom rom for Lenovo A3500HV via offical custom recovery.
Good luck!
Cheers,

anandisrocking007 said:
are you sure because the partition and the kernal are different it might work in the graphical way but can you backup and most importantly restore be carefull might brick your device if you check please tell soon......will be very greatfull as i also have a LenovoA3500-HV
Click to expand...
Click to collapse
I have a chance to try Nandroid backup latest KK FW A3500-HV_A442_01_35_140911 by using the recovery.
Here you go some screenshots.
https://www.dropbox.com/s/c1kyzuu4pwy1nal/20140926_150154.jpg?dl=0
https://www.dropbox.com/s/tzulvxdkjney2qk/20140926_150621.jpg?dl=0
https://www.dropbox.com/s/ekpf7hwvd66w4f8/20140926_151054.jpg?dl=0
https://www.dropbox.com/s/elaia1yn2l6wrvs/20140926_151242.jpg?dl=0

Thanks a ton

strange issue
hi
first thank you so much for all your efforts to other people
second
i bought my 3500hv from week or so with android 4.2.2 and i rooted it easily
yesterday i got update notification for 4.4.2 with s37 version number i updated my tab and after the update finished
i used the tutorial posted here to root the tab and it rooted very well
after that i want to make factory reset from the recovery it stops at formatting data partition for about 5 minutes
i powered off the tab and when it powered on it stuck in boot loop for ever and i cant got into recovery
then i waited tell battery finished and then connect it to pc and got into recovery and tried again but it stops again
what can i do
thanks in advance:crying::crying:
---------- Post added at 09:47 PM ---------- Previous post was at 09:43 PM ----------
note: may be i will need stock recovery for 4.4.2 for my tab to format my tab again

cm12 can't install apk

just like the title say . The screeshot
with installing screen is the main problem, the text in that screenshot mean app hasnt installed (not only this apk but other many ones ,include theme for cm12)
Nevertheless,i have try every way which may cause this issuse like wipe, boot whithout sdcard …things like this, but it was useless .
Below is my version pic (actually,this is my first time flash rom、kernel, i still have something not sure . for instance , i flash my kernel by extracted boot.img from "cm-12-20150112-INFECTED-yuga based" in fastboot mode , then use recovery to restore cm-12-20150112-INFECTED-yuga based.zip , i am suspecting that if there have any wrong procedure )
thank you guys very much for help me this

Yitnspire said:
just like the title say . The screeshot
with installing screen is the main problem, the text in that screenshot mean app hasnt installed (not only this apk but other many ones ,include theme for cm12)
Nevertheless,i have try every way which may cause this issuse like wipe, boot whithout sdcard …things like this, but it was useless .
Below is my version pic (actually,this is my first time flash rom、kernel, i still have something not sure . for instance , i flash my kernel by extracted boot.img from "cm-12-20150112-INFECTED-yuga based" in fastboot mode , then use recovery to restore cm-12-20150112-INFECTED-yuga based.zip , i am suspecting that if there have any wrong procedure )
thank you guys very much for help me this
Click to expand...
Click to collapse
Use a more updated version of cm12
Go to the CM12 thread and go to comments and check some people have ported the updated version like 2412015 and various Valdius based ROM.
Use that and with same KERNEL boot IMG
Regarding installing APK, I think if you update to these version it will get fixed!
I couldn't get what really the problem is
Sent from my Xperia ZR using XDA Free mobile app

Yitnspire said:
just like the title say . The screeshot
with installing screen is the main problem, the text in that screenshot mean app hasnt installed (not only this apk but other many ones ,include theme for cm12)
Nevertheless,i have try every way which may cause this issuse like wipe, boot whithout sdcard …things like this, but it was useless .
Below is my version pic (actually,this is my first time flash rom、kernel, i still have something not sure . for instance , i flash my kernel by extracted boot.img from "cm-12-20150112-INFECTED-yuga based" in fastboot mode , then use recovery to restore cm-12-20150112-INFECTED-yuga based.zip , i am suspecting that if there have any wrong procedure )
thank you guys very much for help me this
Click to expand...
Click to collapse
You cannot flash the downloaded Yuga Infected update on to you ZR mate,, ZR is Dogo..
Head over to Xenius9's thread and download the dogo port infected build from there. There are also instructions on how to update the dogo ported cm 12 there..

[RECOVERY][3.1.1-0] TWRP for hi6250 devices [METICULUS]

No more development from me.
XDA:DevDB Information
TWRP for the Hauwei P9 Lite, Tool/Utility for the Huawei P9 Lite
Contributors
Meticulus
Source Code: https://github.com/Meticulus
Version Information
Status: Beta
Created 2016-11-01
Last Updated 2018-01-18

Installed using my old TWRP, I can confirm that its working properly on my Huawei P9 Lite

So that means when we are using CM13, we can revent back to stock by just restoring our nandroid backup?

Works fine, but you made a mistake in assert lines il your CM13 updater script, you wrote hi2650 instead of hi6250 haha

installed and perfect, thanks

Johnny TDN said:
So that means when we are using CM13, we can revent back to stock by just restoring our nandroid backup?
Click to expand...
Click to collapse
Not quite... Please see FAQ on download page...

enzo24754 said:
Works fine, but you made a mistake in assert lines il your CM13 updater script, you wrote hi2650 instead of hi6250 haha
Click to expand...
Click to collapse
Really... I thought I had that fixed... [emoji6]

So can use this twrp to flash cyanogenmod? And flash stock? Thanks in advance.
Edit: already know it

finely the error 255 is gone , i manage to make a backup , thanks

Link offline
Please, can someone share the file, the download link is offline.
Thank you in advance.

tonioricciato said:
Please, can someone share the file, the download link is offline.
Thank you in advance.
Click to expand...
Click to collapse
The link isn't offline.
Sent from my P9-Lite using Tapatalk

tonioricciato said:
Please, can someone share the file, the download link is offline.
Thank you in advance.
Click to expand...
Click to collapse
Incorrect: tested working...

Meticulus said:
Incorrect: tested working...
Click to expand...
Click to collapse
Hi,
using the dns of google (8.8.8.8/8.8.4.4) the site is unreachable.
Solved thank to opendns.

Hey Meticulus. When I was going to flash your CM, firstly I wiped all the partitions including system. Then I thought maybe restarting the recovery may be good idea. Afterwards the recovery could not boot and the screen was flickering. After some time I figured out that the chinese TWRP worked. So if there is no system installed the recovery couldn't tell if there is stock or CM installed and so it did nothing. Could you look into that? Maybe I am wrong. Thanks.

twrp no full support selinux. how to fix? I'm on stock

Have Problem with
Slect Storage
Micro SD card (0 mb) can't select.
Is with offical twrp same
[EDIT]
Okay i have fixed.
SD card formatted with phone

I cant mount /data partition on stock rom (red recovery).

adek350 said:
I cant mount /data partition on stock rom (red recovery).
Click to expand...
Click to collapse
Did you restore a back up while on CM without restoring the "dump"?

Meticulus said:
Did you restore a back up while on CM without restoring the "dump"?
Click to expand...
Click to collapse
Yes, what do I do now?

adek350 said:
Yes, what do I do now?
Click to expand...
Click to collapse
If you did a dump and have the files then restore the dump ( follow on screen instruction at the end ) and the restore your back up again. If you do not have a dump then you'll need to go through the process of restoring a stock ROM. To be honest, I've never flash a stock ROM but there should be plenty of info around here about how to do it, and plenty of people willing to help you with it.

Backup TWRP // Backup Apps and restore

Hey :good:
Ive got some questions and hope somebody can help me here!
I've got TWRP 3.3.1-46 installed.
I can backup the boot, recovery, system image and vendor image without any problems. However, when backing up the data, I keep getting "createTarFork()" with error 255. I have been searching on google for some time, but have not found the right solution. Has anyone had the problem with MI9 before?
Furthermore I use "titatnium backup" with the pro version to backup the apps. But since a few months I have a lot of problems with this apps too. During the restore the app hangs or the apps are not restored and I have to intervene manually again and again (out of 120apps this concerns about 30). Does anyone have a good alternative?
thank you so much!

LyDjane said:
Hey :good:
Ive got some questions and hope somebody can help me here!
I've got TWRP 3.3.1-46 installed.
I can backup the boot, recovery, system image and vendor image without any problems. However, when backing up the data, I keep getting "createTarFork()" with error 255. I have been searching on google for some time, but have not found the right solution. Has anyone had the problem with MI9 before?
Furthermore I use "titatnium backup" with the pro version to backup the apps. But since a few months I have a lot of problems with this apps too. During the restore the app hangs or the apps are not restored and I have to intervene manually again and again (out of 120apps this concerns about 30). Does anyone have a good alternative?
thank you so much!
Click to expand...
Click to collapse
1 I've had the same, you can find the problem in twrp log. For me it was the empty folder data pre_boot. Deleted and ok.
2. I've the same prob. Some apps didn't restore, only if you installed first manually the app and then restore is working.

Laptapper said:
1 I've had the same, you can find the problem in twrp log. For me it was the empty folder data pre_boot. Deleted and ok.
Click to expand...
Click to collapse
Okay. Where i can find this folder?
Laptapper said:
2. I've the same prob. Some apps didn't restore, only if you installed first manually the app and then restore is working.
Click to expand...
Click to collapse
Youve contact Titanium Backup?

LyDjane said:
Okay. Where i can find this folder?
Youve contact Titanium Backup?
Click to expand...
Click to collapse
Root data pre_boot
No. I'll hope they knew and give an update

LyDjane said:
Okay. Where i can find this folder?
Youve contact Titanium Backup?
Click to expand...
Click to collapse
Yep, same issue here fixed the same way:good:
You'll need to use a file explorer with root privileges to go to the /data folder, keep in mind.
Maybe twrp explorer could do it as well?

Laptapper said:
Root data pre_boot
No. I'll hope they knew and give an update
Click to expand...
Click to collapse
that would be good yes. I cant find a folder that name is "pre_boot"?

1) The official TWRP version for Mi 9 is 3.3.1-0, based on last version of Mauronofrio 3.3.1-52. So I suggest to first migrate onto the current version and to try again.
2) Many problems have been reported for Titanium Backup. I'm using Swift Backup instead without any issues so far.
Cheers
Toscha

LyDjane said:
that would be good yes. I cant find a folder that name is "pre_boot"?
Click to expand...
Click to collapse
It's exactly Per_boot
(Unsure about the underscore)

toscha42 said:
1) The official TWRP version for Mi 9 is 3.3.1-0, based on last version of Mauronofrio 3.3.1-52. So I suggest to first migrate onto the current version and to try again.
2) Many problems have been reported for Titanium Backup. I'm using Swift Backup instead without any issues so far.
Cheers
Toscha
Click to expand...
Click to collapse
can i flash over my twrp without problems? would install via twrp?

Exactly, just flash over the existing TWRP. And yes, you can install through existing TWRP. Just follow the installation guide here.
Cheers
Toscha

toscha42 said:
Exactly, just flash over the existing TWRP. And yes, you can install through existing TWRP. Just follow the installation guide here.
Cheers
Toscha
Click to expand...
Click to collapse
same problem again after flashing 3.3.1-0

toscha42 said:
2) Many problems have been reported for Titanium Backup. I'm using Swift Backup instead without any issues so far.
Click to expand...
Click to collapse
I've been using Swift for quite some time and it certainly lives up to it's name. It backs up so fast compared to TB that at first you assume it can't be working right. I've never had a problem with backup/restores and the UI, especially in dark mode, is great. It will also easily backup sms messages, call logs, wallpapers and wifi settings.
Can't recommend this highly enough.

sooo guys!
ive tested swift backup and it works like charm! awesome no errors or problems. Bought premium directly.
after flashing 3.3.1.-0 twrp and deleten folder pre_boot now it works too!

LyDjane said:
sooo guys!
ive tested swift backup and it works like charm! awesome no errors or problems. Bought premium directly.
after flashing 3.3.1.-0 twrp and deleten folder pre_boot now it works too!
Click to expand...
Click to collapse
Swift backup is really good, but I need to restore sometimes system apps and so I've to be with titanium. Also I'm using freezing apps and other things which aren't possible with swift backup.