Hi
It is possible to flash bootloader for Verizon HTC ONE that goes to standard HTC ONE ? - I will be using the phone in the EU.
After flashing TWRP m7vzw version and instal viper one I got message after system boot that simcard isnt from verizon. I skip that and choose wright carier and everything gooes fine for now.
klujek said:
Hi
It is possible to flash bootloader for Verizon HTC ONE that goes to standard HTC ONE ? - I will be using the phone in the EU.
After flashing TWRP m7vzw version and instal viper one I got message after system boot that simcard isnt from verizon. I skip that and choose wright carier and everything gooes fine for now.
Click to expand...
Click to collapse
it seem that this is not working for now. I flash TWRP 2.7.0.0 m7 version and system can't boot. Go back to the TWRP 2.7.0.8 m7vzw for now and waiting for updates.
klujek said:
Hi
It is possible to flash bootloader for Verizon HTC ONE that goes to standard HTC ONE ? - I will be using the phone in the EU.
After flashing TWRP m7vzw version and instal viper one I got message after system boot that simcard isnt from verizon. I skip that and choose wright carier and everything gooes fine for now.
Click to expand...
Click to collapse
You can't flash a bootloader that is not intended for your phone variant, you will brick it. But wait, you are talking about TWRP which is not the bootloader, its the recovery. You can't neither flash a recovery that is not intended for your phone variant!! Recovery and bootloader version have absolutely nothing to do with the message you got about your sim card.
klujek said:
it seem that this is not working for now. I flash TWRP 2.7.0.0 m7 version and system can't boot. Go back to the TWRP 2.7.0.8 m7vzw for now and waiting for updates.
Click to expand...
Click to collapse
Stop flashing things that are not intended for your M7VZW !!! You will end up messing your partitions. Go read the forums or ask here before doing thing you don't understand.
There also a specific forum for the Verizon Htc one here, you could probably find more precise information for your phone variant.
alray said:
You can't flash a bootloader that is not intended for your phone variant, you will brick it. But wait, you are talking about TWRP which is not the bootloader, its the recovery. You can't neither flash a recovery that is not intended for your phone variant!! Recovery and bootloader version have absolutely nothing to do with the message you got about your sim card.
Stop flashing things that are not intended for your M7VZW !!! You will end up messing your partitions. Go read the forums or ask here before doing thing you don't understand.
There also a specific forum for the Verizon Htc one here, you could probably find more precise information for your phone variant.
Click to expand...
Click to collapse
You are right, my mistake - I mean recovery flash
I was using HTC HD2 on several androids builds before so I get to use with partition mess
All I neet is to get rid of verizon from my toy. Do you think that flashing fimware, radio etc could help ? Something like described here for m7vzw phones http://forum.xda-developers.com/showthread.php?p=46506621 but for m7.
I have bricked my Desire 510. I need a ROM to flash through philz touch recovery, if some one in Australia has this device with philz touch can you please make a backup in the recovery and then post it to me! Its my last hope because no RUUs are working.
Either that or make me a ROM that is for the Australian telstra 64-bit model maybe some ome can teach me how to create and compile it my self.
Have you tried a backup first ?
Vmo x said:
I have bricked my Desire 510. I need a ROM to flash through philz touch recovery, if some one in Australia has this device with philz touch can you please make a backup in the recovery and then post it to me! Its my last hope because no RUUs are working.
Either that or make me a ROM that is for the Australian telstra 64-bit model maybe some ome can teach me how to create and compile it my self.
Click to expand...
Click to collapse
This seems like a Strange question I know, But have you tried doing a BACKUP FIRST ?
Now having had to rescue a couple of these phones (3 to be precise) , (all with the same nandroid backup I might add)
(With No help from HTC - where are the RUU links for our phone I have to ask?, that having been said, thanks HTC for letting me unlock bootloader, (still cool) I take it all back.....)
I have found however that if a flash completes but is no good , fails to boot for example, that if you FIRST, take a backup with philz of your corrupted system, - to allow the recovery to write a last log to (broken) system with mount points,phone specifics about baseband, serial no., etc,.. BEFORE trying to restore a Good copy of a nandroid backup
(hope you have one! )
That you should then be able to restore a nandroid backup to phone. sometimes even a nandroid that failed last time. (due to failing to find mount points)
A quick note on this point is that only backups made while booted into recovery have proven successful when trying to restore backups thus far, all methods of taking backups any other way are/will be corrupted and will not prove in any way useful to restore your device.
Most of the RUU updates are wrong bootloader by the way they are based on 3.4 kernel (32bit) and not 3.10 kernel which is what 64 bit is running.
I would offer you a copy of a nandroid myself but I am aware that radio firmware is tied to carrier and probably would not work for your baseband and carrier setup. If all else fails however you are of course welcome to try, (pm me if you need a copy) I dont think it will be too long before a successful port to our phone anyway.
Good-luck,
ki113r.
Please send me a nano backup when youre on EU models orange romania
jsjohnsheehan said:
This seems like a Strange question I know, But have you tried doing a BACKUP FIRST ?
Now having had to rescue a couple of these phones (3 to be precise) , (all with the same nandroid backup I might add)
(With No help from HTC - where are the RUU links for our phone I have to ask?, that having been said, thanks HTC for letting me unlock bootloader, (still cool) I take it all back.....)
I have found however that if a flash completes but is no good , fails to boot for example, that if you FIRST, take a backup with philz of your corrupted system, - to allow the recovery to write a last log to (broken) system with mount points,phone specifics about baseband, serial no., etc,.. BEFORE trying to restore a Good copy of a nandroid backup
(hope you have one! )
That you should then be able to restore a nandroid backup to phone. sometimes even a nandroid that failed last time. (due to failing to find mount points)
A quick note on this point is that only backups made while booted into recovery have proven successful when trying to restore backups thus far, all methods of taking backups any other way are/will be corrupted and will not prove in any way useful to restore your device.
Most of the RUU updates are wrong bootloader by the way they are based on 3.4 kernel (32bit) and not 3.10 kernel which is what 64 bit is running.
I would offer you a copy of a nandroid myself but I am aware that radio firmware is tied to carrier and probably would not work for your baseband and carrier setup. If all else fails however you are of course welcome to try, (pm me if you need a copy) I dont think it will be too long before a successful port to our phone anyway.
Good-luck,
ki113r.
Click to expand...
Click to collapse
i was brick my phone and i need help please send my a recovery img my root kep working
jsjohnsheehan said:
This seems like a Strange question I know, But have you tried doing a BACKUP FIRST ?
Now having had to rescue a couple of these phones (3 to be precise) , (all with the same nandroid backup I might add)
(With No help from HTC - where are the RUU links for our phone I have to ask?, that having been said, thanks HTC for letting me unlock bootloader, (still cool) I take it all back.....)
I have found however that if a flash completes but is no good , fails to boot for example, that if you FIRST, take a backup with philz of your corrupted system, - to allow the recovery to write a last log to (broken) system with mount points,phone specifics about baseband, serial no., etc,.. BEFORE trying to restore a Good copy of a nandroid backup
(hope you have one! )
That you should then be able to restore a nandroid backup to phone. sometimes even a nandroid that failed last time. (due to failing to find mount points)
A quick note on this point is that only backups made while booted into recovery have proven successful when trying to restore backups thus far, all methods of taking backups any other way are/will be corrupted and will not prove in any way useful to restore your device.
Most of the RUU updates are wrong bootloader by the way they are based on 3.4 kernel (32bit) and not 3.10 kernel which is what 64 bit is running.
I would offer you a copy of a nandroid myself but I am aware that radio firmware is tied to carrier and probably would not work for your baseband and carrier setup. If all else fails however you are of course welcome to try, (pm me if you need a copy) I dont think it will be too long before a successful port to our phone anyway.
Good-luck,
ki113r.
Click to expand...
Click to collapse
i have a similar case, i was able to get 64 bit RUU's from the internet (Asia WWE, and HTC Europe) but i can't flash them, the following is a description of the situation:
1. bootloader unlocked, custom recovery installed.
2. S-ON,
3. no userdata (system partition ?) i don't know the difference, i can flash boot (kernel) and recovery.
4. i can't flash the above mentioned roms since it is saying i have wrong CID, and i can't change the CID because S-ON
any tips ?
* i was able to download, compile & build kernel from source for telstra, i don't know how system (or userdata) image is built, any hint on that as well ?
mohsh86 said:
i have a similar case, i was able to get 64 bit RUU's from the internet (Asia WWE, and HTC Europe) but i can't flash them, the following is a description of the situation:
1. bootloader unlocked, custom recovery installed.
2. S-ON,
3. no userdata (system partition ?) i don't know the difference, i can flash boot (kernel) and recovery.
4. i can't flash the above mentioned roms since it is saying i have wrong CID, and i can't change the CID because S-ON
any tips ?
* i was able to download, compile & build kernel from source for telstra, i don't know how system (or userdata) image is built, any hint on that as well ?
Click to expand...
Click to collapse
"fastboot getvar cid" and post your CID.
lucyr03 said:
"fastboot getvar cid" and post your CID.
Click to expand...
Click to collapse
Hi Mate,
i've got the following:
Code:
cid: TELST001
i was thinking hex editing the zip file to replace the cid, but since its zipped i can't find the plain text to get it replaced.
thanks in advance.
Have u relocked the bootloader and then tried to install the RUU?
I had the same problem with restoring the orginal Rom.
I think the command for relocking the bootloader was "fastboot oem relock"
SpitFireXB360 said:
Have u relocked the bootloader and then tried to install the RUU?
I had the same problem with restoring the orginal Rom.
I think the command for relocking the bootloader was "fastboot oem relock"
Click to expand...
Click to collapse
I've already done that, having the bootloader unlocked will throw another error, this was incorrect CID related one.
my phone is on Telstra (Australia) ROM, sadly, the RUU exists on some Persian forums with paid service, if there is a way where i can compile/build the system image from source, please let me know..
mohsh86 said:
I've already done that, having the bootloader unlocked will throw another error, this was incorrect CID related one.
my phone is on Telstra (Australia) ROM, sadly, the RUU exists on some Persian forums with paid service, if there is a way where i can compile/build the system image from source, please let me know..
Click to expand...
Click to collapse
I will make backup of my system and boot wih phillz, but I'm from EU(64bits)
lucyr03 said:
I will make backup of my system and boot wih phillz, but I'm from EU(64bits)
Click to expand...
Click to collapse
thanks mate, but will it flash ? and shall i flash it using recovery or htc_fastboot ?
---------- Post added at 12:58 PM ---------- Previous post was at 12:25 PM ----------
mohsh86 said:
thanks mate, but will it flash ? and shall i flash it using recovery or htc_fastboot ?
Click to expand...
Click to collapse
and mine is 64 bit btw
mohsh86 said:
thanks mate, but will it flash ? and shall i flash it using recovery or htc_fastboot ?
and mine is 64 bit btw
Click to expand...
Click to collapse
First flash this recovery.
Status: Uploading, sorry for my slow upload speed
P.S: My ROM is not stock, missing few system apps and have modifications by me, SORRY
lucyr03 said:
First flash this recovery.
Status: Uploading, sorry for my slow upload speed
P.S: My ROM is not stock, missing few system apps and have modifications by me, SORRY
Click to expand...
Click to collapse
thanks mate,
please let us know the link for the upload
cheers
May I inquire as to how you got S-ON? I'm hoping mine isn't a door stop. It's stuck and out of commission. Not sure at all what to do at this point. Please help....
---------- Post added at 02:19 PM ---------- Previous post was at 02:12 PM ----------
I know RBHeromax made a kernel for our 64bit and was attempting a ROM. But I haven't checked in the progress today, I'm about to however. Can you please send me a copy of your 64 link? St this point I'll try just About anything. I'll keep you posted
Please helpme find RUU for A11_UL.
My device CID is: HTC__059.
Thank.
Htc desire 510 64 bit
lucyr03 said:
I will make backup of my system and boot wih phillz, but I'm from EU(64bits)
Click to expand...
Click to collapse
salut imi poti da te rog backup stock rom de la telefonul tau te roog mult.
htc desire 510 telstra backup files
you need to make a folder named back up then another folder named 2014-01-01.00.46_KTU84L_release-keys
sorry about the spaces but i couldn't post it any other way
https://drive.google.com/open?id=0B...lMZWRXcWJtNzdPWklUMHE0MVc0dE1ENGxDZkNaZ21seDA
download everything from here and put it in the folder and you should be ok
razza15 said:
you need to make a folder named back up then another folder named 2014-01-01.00.46_KTU84L_release-keys
sorry about the spaces but i couldn't post it any other way
https://drive.google.com/open?id=0ByGpSt5l7872fldKRE9mUkc0M1lMZWRXcWJtNzdPWklUMHE0MVc0dE1ENGxDZkNaZ21seDA
download everything from here and put it in the folder and you should be ok
Click to expand...
Click to collapse
please let me know if anyone has any issues
Hello guys,
i can't find a stock rom for my phone.. having a european 64bit Desire 510 CID: htc_031
i hope someone can help me out!
Grtz Marco
razza15 said:
please let me know if anyone has any issues
Click to expand...
Click to collapse
Silly question...but how do I flash these files to the device?
Thanks in advance!
ruu for htc desire 510 64 bit and 32 bit
bobbytables22 said:
Silly question...but how do I flash these files to the device?
Thanks in advance!
Click to expand...
Click to collapse
okay first off lock your bootloader here are the ruu's for 32 bit and 64bit htc desire 510 series
if you are Europe carrier use any of the 64 bit roms make sure boot loader is locked!!
it wont let me post the link for the ruu.exe so email me [email protected]
i will send the link for the ruu for all 64bit models will work no matter what carrier you have
no need to thank me