Related
New Horizontal Leather Case for the HTC Advantage X7510, X7501, & X7500 by NUTSHELL
New Horizontal Leather Case for the HTC Advantage X7510, X7501, & X7500 by NUTSHELL
Nutshell: http://tuff-as-nuts.com/index.asp?PageAction=COMPANY
I had contacted Nutshell regarding a customized Horizontal Case (black) that will fully enclosed the HTC Advantage X7510 with the leather pouch included about 2 months ago. I was able to get intouch with Ian Miller and was basically received with open arms. I was asked to submit my design and the dimensions.
The dimensions are: 5.8 inches (lenght) x 4.4 inches (height) x 1.30 inches (depth).
It is closed by a velcro flap that fully covers the top of the case preventing any accidental exposure to the elements.
The back of the case has the D ring and metal belt clip lined with leather. But in all honesty, I think it would have looked better if the metal clip was left without the leather strip cover. It would looked nicer if the silver finish of the metal clip was shown rather than hidden.
But all in all, the case is very well made. The stitches and cuttings were done right and very clean. The case will protect the X7510 and it's leather pouch while having the ability to clip it to your belt or trousers on the go.
I paid $95.00 for the case, but it may become cheaper if it will be popular.
I have attached pictures for you guys and gals to check. I believe NUTSHELL will mass produce them if the demand is high enough.
THANK YOU NUTSHELL (Ian) for a case well done.
Feel free to ask questions...
Added Pictures...
Added pictures...
nice find as i just bought myself another case but this one i like a lot better although the case i bought was only $49
Thanks Christian. Glad to help.
As this was a prototype, we have not yet given it a part number...but we shall and then post it to our catalog.
With your blessing I"ll use some of the images you have posted here.
Obviously we shall try to price it right, but as the first few will, like this one, be hand cut, pricing will have to stay the same in the short term.
However, if there is an interest (and it has to be considerable to make it worthwhile, we'll likely look at getting the assets that will enable us to run off some volume).
That said, it really is over to the community to determine if this product gets wings...or....?
A suggestion: Maybe someone could open a book to register interest (bulk purchases work best and enable us to finetune our pricing). As I am not a regular on this forum, maybe that someone could run point for me on this.
So it really is over to you guys.
We'll do what we can.
All the best.
nutshell said:
With your blessing I"ll use some of the images you have posted here.
Click to expand...
Click to collapse
Yes of course. Feel free to use it.
cktlcmd said:
Yes of course. Feel free to use it.
Click to expand...
Click to collapse
Nutshell,
Very well taken pictures indeed. Looks like real good quality pouch. Is it made to custom sizes? I normally carry my device without the keyboard, so it is quite a bit thinner and smaller. What would be the total cost shipped to Australia?
Also, a question for cktlcmd. Currently, I have a soft pouch, and taking it out is easy, as I can squeeze the soft pouch to push out the device. With a hard leather one, I imagine it is not easy to squeeze the bottom to force the device upward, so one would have to lift it up. Would that be easy? Or would the device be too slippery for that, even that I carry it naked?
eaglesteve said:
Also, a question for cktlcmd. Currently, I have a soft pouch, and taking it out is easy, as I can squeeze the soft pouch to push out the device. With a hard leather one, I imagine it is not easy to squeeze the bottom to force the device upward, so one would have to lift it up. Would that be easy? Or would the device be too slippery for that, even that I carry it naked?
Click to expand...
Click to collapse
In my case, since it also houses the X7510 with keyboard and the leather case, it is not slippery at all. It is easy to grab it on top and just pull it out. The case itself is not made of really hard leather plus it is lined inside with felt like skin to protect the device from being scratched by the case itself. The technique I use to get it out fast is to pull on top and press each sides of the case because that is where I notice the greatest hold on the device occurs.
In your case, since you will probably want Nutshell to adjust the measurements to accommodate just the device, it won't even be a problem because of the soft felt lining, it will just slid easily in and out.
It trully is a nice case. I wish they had designed it like this from the start.
nutshell said:
Thanks Christian. Glad to help.
As this was a prototype, we have not yet given it a part number...but we shall and then post it to our catalog.
With your blessing I"ll use some of the images you have posted here.
Obviously we shall try to price it right, but as the first few will, like this one, be hand cut, pricing will have to stay the same in the short term.
However, if there is an interest (and it has to be considerable to make it worthwhile, we'll likely look at getting the assets that will enable us to run off some volume).
That said, it really is over to the community to determine if this product gets wings...or....?
A suggestion: Maybe someone could open a book to register interest (bulk purchases work best and enable us to finetune our pricing). As I am not a regular on this forum, maybe that someone could run point for me on this.
So it really is over to you guys.
We'll do what we can.
All the best.
Click to expand...
Click to collapse
I am very interested!
Another case?
eaglesteve said:
Very well taken pictures indeed. Looks like real good quality pouch. Is it made to custom sizes? I normally carry my device without the keyboard, so it is quite a bit thinner and smaller. What would be the total cost shipped to Australia?
Click to expand...
Click to collapse
I have listed the product for the x7510 in our catalog:
Horizontal belt case for HTC x7510
Sure, we can make you a slimmer horizontal case.
Costs would be the same.
We would need the dimensions without the keyboard.
Shipping to Oz from NZ depends on how quickly you would want one.
Contact me through the website.
tuff-as-nuts.com
Will the 7510 case also fit the 7500/7501? My understanding is that they are the same dimensions... Anyone know offhand?
Thanks for the topic
Have anyone ever seen a vertical case for X7500 for the use without the external keyboard?
This is a bit off-topic, but personally I find the HW keyboard to be the ultimate screen-protector and would not dream of leaving home without it (even though I use my Advantage in portrait-mode 95% of the time).
On-topic again I would guess that one could use any case made for the 7510 WITH keyboard as this unit is just a bit thinner than the original 7500/7501.
trondkk said:
This is a bit off-topic, but personally I find the HW keyboard to be the ultimate screen-protector and would not dream of leaving home without it (even though I use my Advantage in portrait-mode 95% of the time).
On-topic again I would guess that one could use any case made for the 7510 WITH keyboard as this unit is just a bit thinner than the original 7500/7501.
Click to expand...
Click to collapse
No. The keyboard is the most effective way to ruin your device with scratches. Take it away if you want your unit to look new all the time. If you really must have the keybaord, put a piece of cloth between the unit and the keyboard to prevent them from rubbing against each other.
We have different experiences then eaglesteve. I have used my HTC X7500 for well more than a year with the original book cover (with the 3 clips) and have only miniscule scratches on the keyboard itself, not on the main unit.
I now also have the Piel Frama Case (since a month ago) and with this case it would be even more difficult to scratch the unit with the keyboard.
And even if this was NOT the case I would much rather have endured a scratch or two than having my screen broken due to a fall or pointed item pressing against it (even in the pouch). The solid steel of the keyboard over the screen gives me an ease of mind I will not trade for the sake of a marginally smaller "package" to carry around.
And now, with the vertical Nutshell-Pouch I hope to enjoy my Advantage X7500 for a long time since no better device (for my needs) seems forthcoming from HTC or any other manufacturer.
I agree with eaglesteve - I've had more scratches/rub-marks from the keyboard than from anything else. Keeping the keyboard as a screen protector is a non-issue, just make sure the screen faces towards your body when its in a pouch, or in a pocket. On the weekends I leave my Nutshell and the keyboard at home, and just face the screen towards my leg in my pocket.
techntrek said:
I agree with eaglesteve - I've had more scratches/rub-marks from the keyboard than from anything else. Keeping the keyboard as a screen protector is a non-issue, just make sure the screen faces towards your body when its in a pouch, or in a pocket. On the weekends I leave my Nutshell and the keyboard at home, and just face the screen towards my leg in my pocket.
Click to expand...
Click to collapse
Here you can find a scratch proof leather case. Also cheap and black (more elegant) colour.
http://cgi.ebay.co.uk/ws/eBayISAPI....m=370063633176&ssPageName=STRK:MEWN:IT&ih=024
finally after many, many tries, a case that really works. well made. beautiful. sturdy. i got the mag lock. very nice, highly recommended.
Well... I just order mine from Spain... 10/14 days to wait... will see. I'm risk 99.95 USD on it.
I just receive the confirmation email... good signal, my VISA still works.
Received last week.
Well finished... and the quality is according the price.
The X7500 fits perfectly even with it's case. Since I'm not placing the X7500 in the case with the original one there is place for my backup battery.
Great job Nutshell
This case is nice! But I always wanted a case that would allow me to hold my X7500 without the keyboard,so it would look like a slim and supersized-screen IPOD! That I can put into my pocket easily..like an IPOD.
So, I have a question for Nutshell: can you build us one? But I can someone here volunteer to provide some dimentions for an X7500 or X7501, coz I really sucked at the whole designing and measurement thing, afraid I would screw up the whole thing.
For any one who likes their Case Mate cover on their iPod and other products, you might find that the current HD2 cover by Case Mate DOES NOT fit the TMO-US model which is 1.5mm different. I think if Case Mate receives a spark of interest for this item through phone calls from TMOUS HD2 owners, They may want to comply with the demand.......give them a call as I did. They close at 5PM Eastern Time
CALL CASE MATE at 1-866-689-3432 AND HELP BUILT DEMAND for a great product. I find it interesting that they show a cover for the iPad on their website BEFORE its is even available for purchase but no cover for the best phone on the US market.
CALL CASE MATE 1-866-689-3432
i thought i read in the cases thread that they are already making it
methodz said:
i thought i read in the cases thread that they are already making it
Click to expand...
Click to collapse
They, in fact, do make it......for the "international version" HTC HD2, NOT TMO_US HD2.
http://www.case-mate.com/HTC-HD2-Cases/Case-Mate-HTC-HD2-Barely-There-Cases.asp
Look at the bold print just above the price.
If it is available, please enlighten us at where this elusive item is to be purchased.
Hi all, here is a little warning from me and Beards, who purchased the Case-mate barely there silver chrome for out international HD2.
I already returned this case. It was really a bad experience. Although it looks very nice, thin, save the slim design for HD2, unfortunately, it was a nightmare to take the phone out of the case. If you want to take the phone out often, or you are the type that like to change case once a few days like me, or worse if your HD2 crashes or hang and you have to do a soft reset with pen, you really shouldnt buy this case. For the first time I put my phone into the case, and near 10' to take it out, it also nearly scratched all 4 rubber corners of my HD2. If I continue using this case, my beloved HD2 going to be just like the pics in Nightfire123 review, really terrible.
I really recommend not buy this case, if you dont want your lovely HD2 get scratches.
And here is Beard's opinion through our PM:
"When I received my case I was away abroad and it was my daughter who said she thought the case was marvelous.
However, since coming back home and having now tried the case I agree completely, it's an absolute nightmare to take off (only found this out the other day when I had to remove the case from the phone).
Only be grabbing one of the sides and pulling it really hard did I 'eventually' manage to prize it from the phone.
I shan't be returning the case as my daughter threw away all the packaging and it didn't cost a great deal.... I shall however keep the case so that I can use it to experiment against other cases."
U can check this thread from Nightfire123 to see how it will scratch your HD2 after using for a while
http://forum.xda-developers.com/showthread.php?t=642714
fantasytozi said:
Hi all, here is a little warning from me and Beards, who purchased the Case-mate barely there silver chrome for out international HD2.
I already returned this case. It was really a bad experience. Although it looks very nice, thin, save the slim design for HD2, unfortunately, it was a nightmare to take the phone out of the case. If you want to take the phone out often, or you are the type that like to change case once a few days like me, or worse if your HD2 crashes or hang and you have to do a soft reset with pen, you really shouldnt buy this case. For the first time I put my phone into the case, and near 10' to take it out, it also nearly scratched all 4 rubber corners of my HD2. If I continue using this case, my beloved HD2 going to be just like the pics in Nightfire123 review, really terrible.
I really recommend not buy this case, if you dont want your lovely HD2 get scratches.
And here is Beard's opinion through our PM:
"When I received my case I was away abroad and it was my daughter who said she thought the case was marvelous.
However, since coming back home and having now tried the case I agree completely, it's an absolute nightmare to take off (only found this out the other day when I had to remove the case from the phone).
Only be grabbing one of the sides and pulling it really hard did I 'eventually' manage to prize it from the phone.
I shan't be returning the case as my daughter threw away all the packaging and it didn't cost a great deal.... I shall however keep the case so that I can use it to experiment against other cases."
U can check this thread from Nightfire123 to see how it will scratch your HD2 after using for a while
http://forum.xda-developers.com/showthread.php?t=642714
Click to expand...
Click to collapse
Your opinion is exactly what I like to see and I greatly appreciate your input!!! You make a very good point; there is no soft reset access from the front of the device. Also, the memory card is also not accessible. I'm agreeing with you; maybe I don't want this case.....Buuuuuut, if they did make changes for fitting TMOUS HD2, and take customer complaints on the design into account, the new design may be as to improve on the errors of the previous. Hey, I'm an optimist.
I have been reading mixed reviews about the case and it's fairly expensive over in Egypt so I cannot really decide if I should buy it or not, and unfortunately there's no option of trying it beforehand.
One recent user said that it actually created a smudge/scratched his screen and that kind of scares me because I just bought the phone for a crap load of money and I don't want to scratch it. I have been a M7 user for almost two years and it doesn't have a single scratch on it. The reason I am hesitant about the Dot View is because it's a flip case and even though I bought the HTC Double Dip Flip case for M7 when I first got it with excitement, I ended up ditching it for a normal back cover about a week later because it's a pain as a daily-driver.
My M8 came with a cover inside the box (which I am assuming is standard with any M8) and it actually does a decent job but I am not a fan of rubber-feel cases and I prefer plastic ones. The only problem with back covers is that when my M7 accidentally fell of the table last week, its screen got shattered and I was very upset about it. I am pretty sure if I had the Double Dip Flip cover on, that wouldn't have happened.
Any information, thoughts, and advice are much appreciated.
I would say its a personal preference. I got a dot view case just to check it out. It was sort of fun but the novelity wore off pretty fast. The big problem with that case is that it offers very little in the way of protection for the phone...and secondly, you can't use it with a glass screen protector (for the most part) because the case doesn't close fully with the glass installed. Also, the phone is a pain to get out of your pocket due to the rubber front, which by the way, will forever attract lint and get all mucked up...All in all it was more of a pain in the end.
I ended up choosing a nice iloome 9H tempered glass screen protector and a Spigen Slim Armor case and its a fantastic match of good looks and protection.
Here are a couple of links if it helps you...best of luck with your new M8. You're going to love it.
http://www.amazon.com/iloome-ScreenMate-Tempered-Protector-Oleophobic/dp/B00ADT25ZG
http://www.amazon.com/Spigen%C2%AE-CUSHION-Protective-Smooth-Cushioned/dp/B00IF5B49S
Thank you for your reply. That case looks rather impressive. I actually forgot to install a screen protector, thank you for reminding me, I'll be doing that tomorrow. I'll see if I can find that case locally, if not I'll see if I can order it online - I am not sure if they ship to Egypt, though, because most sellers on Amazon don't. Thanks again!
EDIT: I found one but I am not sure if it's the same as the one you linked: http://egypt.souq.com/eg-en/slim-ar...rotector-for-htc-one-m8-black-grey-7066001/i/
http://egypt.souq.com/eg-en/slim-ar...een-protector-for-htc-one-m8-black-7066006/i/
It looks rather similar, though, and the price is fair. I think I'll be placing an order.
TarekElsakka said:
Thank you for your reply. That case looks rather impressive. I actually forgot to install a screen protector, thank you for reminding me, I'll be doing that tomorrow. I'll see if I can find that case locally, if not I'll see if I can order it online - I am not sure if they ship to Egypt, though, because most sellers on Amazon don't. Thanks again!
EDIT: I found one but I am not sure if it's the same as the one you linked: http://egypt.souq.com/eg-en/slim-ar...rotector-for-htc-one-m8-black-grey-7066001/i/
http://egypt.souq.com/eg-en/slim-ar...een-protector-for-htc-one-m8-black-7066006/i/
It looks rather similar, though, and the price is fair. I think I'll be placing an order.
Click to expand...
Click to collapse
I own one, and I have a love/hate relationship with it.
First thing first: The case is extremely attractive: everybody will ask you for it, and you can show it off to all your friends (mines are all in love with my phone just for the Dot View Case)
the fact that you can answer / hang the phone without opening the flip is very useful
The Bad: Typing with the case open is a real pain. There are occasions (when sending long text messages) that I found Myself removing the case, typing quickly the msg and putting the case back on.
the way the flip is designed makes it constantly trying to keeps its closed state. so if you are using the phone one handed you will find yourself constantly struggling with the case to keep it open
That's exactly why I hated the M7's double dip flip cover.. it just made typing with two hands a hassle, let alone with only one.
TarekElsakka said:
I have been reading mixed reviews about the case and it's fairly expensive over in Egypt so I cannot really decide if I should buy it or not, and unfortunately there's no option of trying it beforehand.
One recent user said that it actually created a smudge/scratched his screen and that kind of scares me because I just bought the phone for a crap load of money and I don't want to scratch it. I have been a M7 user for almost two years and it doesn't have a single scratch on it. The reason I am hesitant about the Dot View is because it's a flip case and even though I bought the HTC Double Dip Flip case for M7 when I first got it with excitement, I ended up ditching it for a normal back cover about a week later because it's a pain as a daily-driver.
My M8 came with a cover inside the box (which I am assuming is standard with any M8) and it actually does a decent job but I am not a fan of rubber-feel cases and I prefer plastic ones. The only problem with back covers is that when my M7 accidentally fell of the table last week, its screen got shattered and I was very upset about it. I am pretty sure if I had the Double Dip Flip cover on, that wouldn't have happened.
Any information, thoughts, and advice are much appreciated.
Click to expand...
Click to collapse
I've never been one for cases on my phones, especially a phone as attractive as the M8. Having said that however I did get a dot view case as a part of a bundle when I got the M8 and I do find myself using the case most of the time. The reason is the case, in addition to being protective, is also functional. The M8 without a case is so smooth and slick (in every sense of the word) that I'm sure that I would have dropped by now if I wasn't using the dot-view case.
Are they good? They're even advertised as "Genuine" for $7~8, but without the HTC logo at front / back.
Ebay link
Note: Yes, we know that not everybody likes the dot view case.
200
lsv-1 said:
Are they good? They're even advertised as "Genuine" for $7~8, but without the HTC logo at front / back.
Ebay link
Note: Yes, we know that not everybody likes the dot view case.
Click to expand...
Click to collapse
Here's the one with the HTC logo for a few bucks more.
Personally, I think it's the same exact piece of plastic. One just has a logo and a steeper price.
http://www.ebay.com/itm/HTC-DOT-VIEW-CASE-COVER-FOR-NEW-HTC-ONE-M8-HC-M100-GENUINE-OFFICIAL-/221503424128?pt=US_Cell_Phone_PDA_Cases&var=&hash=item3392a20680"]Check this out
ImSt00pid said:
Here's the one with the HTC logo for a few bucks more.
Personally, I think it's the same exact piece of plastic. One just has a logo and a steeper price.
http://www.ebay.com/itm/HTC-DOT-VIEW-CASE-COVER-FOR-NEW-HTC-ONE-M8-HC-M100-GENUINE-OFFICIAL-/221503424128?pt=US_Cell_Phone_PDA_Cases&var=&hash=item3392a20680"]Check this out
Click to expand...
Click to collapse
yea i would stay away from the unbranded ones i had the normal one but it wouldnt close all the way because ive got a glass screen protector so i ended up returning it and getting an otter
ImSt00pid said:
Here's the one with the HTC logo for a few bucks more.
Personally, I think it's the same exact piece of plastic. One just has a logo and a steeper price.
http://www.ebay.com/itm/HTC-DOT-VIEW-CASE-COVER-FOR-NEW-HTC-ONE-M8-HC-M100-GENUINE-OFFICIAL-/221503424128?pt=US_Cell_Phone_PDA_Cases&var=&hash=item3392a20680"]Check this out
Click to expand...
Click to collapse
Guess what bro, those aren't genuine either even if they say so. If you look at the pics you'll notice that some don't have the htc logo
I have the genuine gray, I bought it when I've got the phone, but I'm curious about the quality of the ones they're selling for $8, that's it.
To be honest they look exactly the same but I would like a closer look. Sellers in Amazon claim that they're identical to the genuine with the exception of the logo.
Bierce22 said:
yea i would stay away from the unbranded ones i had the normal one but it wouldnt close all the way because ive got a glass screen protector so i ended up returning it and getting an otter
Click to expand...
Click to collapse
I always stay away from unbranded stuff, but these called my attention because they look identical and there are more colors available
Don't put a 10cent case on a $600 phone.....spend the money on a genuine case.
Sent from my SM-P600 using XDA Premium HD app
Weirdly I got one on eBay for about 9$ sold as authentic and I figured why not get one to check out how much I like it and it was HTC branded. Although that could be faked.
Sent from my HTC One_M8 using
I had an original dot view case that I purchased the week the M8 came out. I accidentally ripped the front from the back trying to stretch it to go over my glass screen protector. Back in July I purchased this one, http://www.ebay.com/itm/291190318285.
It doesn't say HTC and obviously an overseas knockoff. In my opinion it's much, much nicer than the OEM version. It will flip open all the way back easily and isn't near as springy. It also works with my .3mm glass screen protector, http://www.aliexpress.com/snapshot/6100440084.html.
henderjr said:
I had an original dot view case that I purchased the week the M8 came out. I accidentally ripped the front from the back trying to stretch it to go over my glass screen protector. Back in July I purchased this one, http://www.ebay.com/itm/291190318285.
It doesn't say HTC and obviously an overseas knockoff. In my opinion it's much, much nicer than the OEM version. It will flip open all the way back easily and isn't near as springy. It also works with my .3mm glass screen protector, http://www.aliexpress.com/snapshot/6100440084.html.
Click to expand...
Click to collapse
They are the same in quality! :good: That's what I thought.
bandjosh said:
Weirdly I got one on eBay for about 9$ sold as authentic and I figured why not get one to check out how much I like it and it was HTC branded. Although that could be faked.
Sent from my HTC One_M8 using
Click to expand...
Click to collapse
Share the link or pics please!
GalaxyNotesTx said:
Don't put a 10cent case on a $600 phone.....spend the money on a genuine case.
Sent from my SM-P600 using XDA Premium HD app
Click to expand...
Click to collapse
Don't use one of these cases for protection period. I can almost state with certainty that if you drop your phone on any kind of solid surface, it will definitely come flying out of these cases. In fact, if you clumsily open the case to fast the device will come flying out sometimes. That is in the original from Verizon. They offer some screen protection while in pockets or bags, but little to no drop protection & even in bags, the top & bottom of the device is not protected from scratches.
It was a little more than I remembered but it's 13$ http://www.ebay.com/itm/221503424128?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT
The pictures are of mine.
Beyond that I agree with the post above mine, the dot view case is very functional as an accessory but as a protector it's useless it pops out so easily.
Sent from my HTC One_M8
I ordered this one last night and hope to see it in the mail sometime next week.
http://www.ebay.com/itm/12142505686...49&var=420362064890&ssPageName=STRK:MEBIDX:IT
And I also agree with the two previous posts. I bout the official case back in June and two weeks ago, it fell on a carpeted space and the phone flew out of it as well as the corners that secure the phone popping off. Since I enjoyed the functionality of the case, I ordered the above since spending $40.00 for something HTC will not stand behind (I tried to get them to replace it but was told they would not) was not something I was willing to do again.
I will report back pnce I get it.
I had the fake one with logo and the real deal case I got from a Verizon store. Felt the fake with the logo was just as good. So went to return the real deal case at Verizon. Turns out I mistakenly packaged the fake one and returned that one to Verizon(honest mistake). I had no idea until later when I took my One out of my csndyshell case and popped it in the dot view....So while I didn't mean to do that, I ended up with the real deal case. But honestly the fake one closed better than the real one. That is how close they are.
I'm on the Dot View case fence. I really like the concept but the reviews I've read have kept me from picking one up. Does the flap "loosen up" for lack of a better term after using it over time. What I mean is when open and flipped to the back does it start loosing it's springness that people complain about. I like hearing that the generic's seem just as good as the one from htc. I may just have to pick one up at the lower price.
I had an authentic one, and then recently bought one of those non-authentic ones.
As a direct comparison, they both look the same, but the quality is different. particularly, the dots' translucent level is very uneven, so you'll get random brighter vs darker patches
on the authentic one, all dots have consistent translucency
OME or Knock-off, I wish that someone would come out with one that snaps on decently (even if it used double-sided tape) and maybe wrapped in leather. The plastic makes the phone feel so cheap! I had the original. I have since misplaced it since I got a cheap otterbox knock off for now. Does the job, but I do miss the DotView for the cool factor.
theandies said:
I'm on the Dot View case fence. I really like the concept but the reviews I've read have kept me from picking one up. Does the flap "loosen up" for lack of a better term after using it over time. What I mean is when open and flipped to the back does it start loosing it's springness that people complain about. I like hearing that the generic's seem just as good as the one from htc. I may just have to pick one up at the lower price.
Click to expand...
Click to collapse
I have an OEM Dot View case and love it. I spent about $15 for it on Amazon. HTC also updated Dot View to add more functionality. And I was surprised yesterday by the Halloween animations. I'm very impressed by it and glad I got it.
SoI received my case today in the mail and here are my findings:
1. The case closes just as well as the OEM one I had.
2. The plastic case itself feels a bit thinner that the OEM one but I like that since I felt the OEM one was a bit too thick and added bulk to the phone.
The "Seams are not as smooth as the OEM but I am going to try and use a nail file and see if I can't fix that my self
4. The "Springiness" of the hinge that is in the OEM is not present in this case as it was in the OEM
5. The cover does not lay flat on the back of the case when opened all the way but I think that is just due to the design of the case.
6. The case seeme to snap onto the phone as well as the OEM case did.
To me, the $8.00 I spent on this case is totally worth it. As a matter of fact, I might order myself a second one to have different colors to chose from. If you think about it, for the price of one OEM you can get 6 of these in different colors and still have $2 and change left over!
I posted some pics of the case but it's hard to see any details.
Hope this helps you guys make a choice.
RonMac said:
I ordered this one last night and hope to see it in the mail sometime next week.
http://www.ebay.com/itm/12142505686...49&var=420362064890&ssPageName=STRK:MEBIDX:IT
And I also agree with the two previous posts. I bout the official case back in June and two weeks ago, it fell on a carpeted space and the phone flew out of it as well as the corners that secure the phone popping off. Since I enjoyed the functionality of the case, I ordered the above since spending $40.00 for something HTC will not stand behind (I tried to get them to replace it but was told they would not) was not something I was willing to do again.
I will report back pnce I get it.
Click to expand...
Click to collapse
I would like to share my experience. I have bought one of the TPU cases sold online currently which almost all share the same build. The case is good but there is a downside to using it; you will not be able to use Air Triggers with it on. The device will not be able to detect your squeeze unless you have the grip of an ironman and of course detect your frame taps. The only case currently that seems suitable to use without any sacrifice is the official one by Asus which is ridiculously expensive and I don't think it's worth its price.
I think the issue here is with the phone frame touch sensitivity and not necessary the cases. Unless the case has a very very thin soft shell or a cut out i doubt any TPU case will make Air Triggers work.
Update(29-11-2018): I ordered another black case similar to the previous one( the Pics shown below) but with a cut out for the ROG logo in the back. To my surprise the case came with a cut out for the Air Triggers too( 2 cut outs in 1 side and another cut out on the other side total 3) which wasn't mentioned in the seller website.
Here is the thing though the cut outs are very small to use comfortablely( you can't use the squeeze function because of the size but you can use the tap function) what you can do to enlarge the cut out; is to cut the sides of the holes to make further touch space if you prefer to do so.
So next time you buy a similar black case make sure to confirm with the seller the existence of the cut outs. Good luck ?
Rashad83 said:
I would like to share my experience. I have bought one of the TPU cases sold online currently which almost all share the same build. The case is good but there is a downside to using it; you will not be able to use Air Triggers with it on. The device will not be able to detect your squeeze unless you have the grip of an ironman and of course detect your frame taps. The only case currently that seems suitable to use without any sacrifice is the official one by Asus which is ridiculously expensive and I don't think it's worth its price.
I think the issue here is with the phone frame touch sensitivity and not necessary the cases. Unless the case has a very very thin soft shell i doubt any TPU case will make Air Triggers work.
Click to expand...
Click to collapse
I thought the same thing and also attaching accessories which is why I unfortunately am waiting for Asus to release their case here in the US.
spoonerweb_com said:
I thought the same thing and also attaching accessories which is why I unfortunately am waiting for Asus to release their case here in the US.
Click to expand...
Click to collapse
I just received the Asus case and on the website it says it won't interfere with the accessories, however, the instructions say otherwise. The two plastic pieces that go on the ends of the phone have a sticker backing, so once you put this on, you will no longer be able to connect it to anything else. The instructions even say you won't be able to use any of the docks. And to use the aero cooler that came with the phone will require to remove the middle plastic backing which doesn't have very good tabs to begin with. Also, found it impossible to use a very thin metal plate between this case and phone in order to use magnetic holders. So, looks like I am returning mine.
---------- Post added at 12:25 AM ---------- Previous post was at 12:23 AM ----------
Rashad83 said:
I would like to share my experience. I have bought one of the TPU cases sold online currently which almost all share the same build. The case is good but there is a downside to using it; you will not be able to use Air Triggers with it on. The device will not be able to detect your squeeze unless you have the grip of an ironman and of course detect your frame taps. The only case currently that seems suitable to use without any sacrifice is the official one by Asus which is ridiculously expensive and I don't think it's worth its price.
I think the issue here is with the phone frame touch sensitivity and not necessary the cases. Unless the case has a very very thin soft shell i doubt any TPU case will make Air Triggers work.
Click to expand...
Click to collapse
Would it be possible to cut out the area where the air triggers are at and/or the back to expose the logo?
spoonerweb_com said:
I just received the Asus case and on the website it says it won't interfere with the accessories, however, the instructions say otherwise. The two plastic pieces that go on the ends of the phone have a sticker backing, so once you put this on, you will no longer be able to connect it to anything else. The instructions even say you won't be able to use any of the docks. And to use the aero cooler that came with the phone will require to remove the middle plastic backing which doesn't have very good tabs to begin with. Also, found it impossible to use a very thin metal plate between this case and phone in order to use magnetic holders. So, looks like I am returning mine.
---------- Post added at 12:25 AM ---------- Previous post was at 12:23 AM ----------
Would it be possible to cut out the area where the air triggers are at and/or the back to expose the logo?
Click to expand...
Click to collapse
There are cases with a cut for the logo so no worries regarding that. About the air triggers you can make cuts for them but that will render the case ugly and not worth it. I think we will need to wait a couple of months until other options are available. I think a good idea for a case would be similar to what Asus did but with better implementation; which I think will be on the way.
Regarding the squeeze function I think it's a bad implementation compared to HTC devices. My previous phone HTC U11+ had a thick TPU case and I was able to squeeze easily to trigger functions but with the ROG I don't think it's even possible or rather as easy.
Currently i think the best alternative to the official case for our device without losing features(Air Triggers working) is this:
https://www.aliexpress.com/item/For...lgo_pvid=e4e01e65-a8dc-45a2-b8e3-9ca1e99ce5c6
Rashad83 said:
Currently i think the best alternative to the official case for our device without losing features(Air Triggers working) is this:
https://www.aliexpress.com/item/For...lgo_pvid=e4e01e65-a8dc-45a2-b8e3-9ca1e99ce5c6
Click to expand...
Click to collapse
I agree, looks good! I found on amazon:
https://www.amazon.com/Redluckstar-...detailedview-20&ie=UTF8&qid=1543095427&sr=8-2
New TPU case.
Rashad83 said:
New TPU case.
Click to expand...
Click to collapse
Where did you buy it from and how many days did take to be delivered?
ermacwins said:
Where did you buy it from and how many days did take to be delivered?
Click to expand...
Click to collapse
I bought it from Taobao, the number of days it takes depends on your location mine took 3 days. You can find similar cases on Amazon too. You can check the links above.
I Just bought this One, 4€ on AliExpress ?
January will soon be over and there is still no fitting case for this phone. These AirTrigger cutouts are too low. They are simply not where they should be. Squeeze doesnt work. The Phone itself is great but the missing community and the utter lack of support from Accessoire manufacturers are significant downsides.
I just bought the transparent TPU case. I will share my final evaluation of it after using it for some time.
One of the good things about this case is you can see the Aura notification light flashing from the side when the phone is faced up. All thanks to the transparency and light reflection. So if the room is dark you will know there is a notification without turning the phone with the back facing up to know there is a notification.
Try the squeeze function. You will notice that the AirTriggers dont work. I have pretty much the same case.
I have the same case and prefer it to all the others I have tried. My air triggers work just fine.
Einheit-101 said:
Try the squeeze function. You will notice that the AirTriggers dont work. I have pretty much the same case.
Click to expand...
Click to collapse
Actually air triggers work ok for me you simply need to squeeze near the top edges of the cut outs and you also need to reduce the squeeze pressure to the minimal number. i wouldnt say they are perfect they actually needed to be positioned a little bit higher but in terms of the cut out length I would say it's sufficient.
As @spoonerweb_com stated this is currently the best case out there. I hope we get a transparent case in the future but with thicker skin for protection especially the edges.
Einheit-101 said:
Try the squeeze function. You will notice that the AirTriggers dont work. I have pretty much the same case.
Click to expand...
Click to collapse
same on my one too
I have recently received the same case (different brand though) as Rashad83. Air triggers work fine, sensibility is fine and you just need to get used to feel the edge of the case when using the triggers. I have been able to play PUBG with the Air Triggers woking fine.
I have not set up the squeeze function as I have not used it, maybe shall try it later.
Only drawback of this case is that it is not "high" enough on the phone edges, so if you put your phone screen down, the screen will touch the table-whatever it is on, so a screen protector (glass preferably) is recommended.