Hello everyone. You can install lasest unreleased Android 8 beta stock rom to your Axon 7 by following this thread.
We have backed up the rom from sedoy87's phone.
Special thanks to the russian guy sedoy87 who is received the beta firmware on his device over ota .
Особая благодарность российскому парню sedoy87, который получил бета-версию прошивки на своем устройстве над ota.
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions.
I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been modified before it was cool.
Known bugs:
-Half of display is not working on some devices. Fixed on new version
-Fingerpring sensor. Fixed on new version
-Maybe undiscovered other stuff.
Download:
Mod Edit: Links removed
Instructions for installing in EDL mode:
- Install MiFlash. Driver will be installed automatically.
- Turn off your device. And make sure it doesn't connect to pc via usb cable.
- Plug your device to pc by pressing volume keys and power key at the same time.
- Your device should be enter EDL mode.
- Make sure you see to device as "Qualcomm HS-USB QDLoader 9008"
- Open MiFlash. Browse and choose folder you've downloaded.
- Click Refresh. You should see your device on list.
- Flash and wait until installation is done.
- You can turn on your device.
Instructions for getting radio on A2017G and A2017U:
[21.12.2017]
Some guys reported there is no sound making a call on Android 8 with nougat modem.
So I have modded new oreo modem and now it compatible with A2017G and A2017U models.
The zips are flashable, you can install over twrp or you can unpack related zip and replace NON-HLOS.bin file with EDL rom's one before installion.
ZTE_A2017G_MODDED_MODEM_FOR_OREO_A2017V3.0.0B01-2_TURKDEVS.zip
ZTE_A2017U_MODDED_MODEM_FOR_OREO_A2017V3.0.0B01-2_TURKDEVS.zip
Zte has released a new version with same build number. I couldn't see any bug on this build. Also kernel has upgraded 3.18.66 to 3.18.71 and It has a new Dolby UI.
asderdd said:
Reserved
Click to expand...
Click to collapse
Thnx !
ALL CREDITS TO YOU MATE !
Will test if usable
raystef66 said:
Thnx !
ALL CERDITS TO YOU MATE !
Click to expand...
Click to collapse
Says device is corrupt and can't proceed on A2017U.
aclegg2011 said:
Says device is corrupt and can't proceed on A2017U.
Click to expand...
Click to collapse
The same thing happens to me after installing.
if you install the FASTBOOT_UNLOCK_EDL_N. The message is deleted but it does not start.
it also encrypts the phone.
Nor can you listen to who calls you.
kenet said:
The same thing happens to me after installing.
if you install the FASTBOOT_UNLOCK_EDL_N. The message is deleted but it does not start.
it also encrypts the phone.
Nor can you listen to who calls you.
Click to expand...
Click to collapse
On the plus side, I dumped the system.img
[/COLOR]
kenet said:
The same thing happens to me after installing.
if you install the FASTBOOT_UNLOCK_EDL_N. The message is deleted but it does not start.
it also encrypts the phone.
Nor can you listen to who calls you.
Click to expand...
Click to collapse
True Kenet.
As stated by other users not even descent phone calls can be made...
Looks unstable to me.
Going to wait for the official ROM
raystef66 said:
[/COLOR]
True Kenet.
As stated by other users not even descent phone calls can be made...
Looks unstable to me.
Going to wait for the official ROM
Click to expand...
Click to collapse
Thanks friend. and know why it can be in corrupt system message?
I also realized that data change to emmc
Thanks again.
I also think it is better to wait for the official ta that is missing days for your departure.
aclegg2011 said:
Says device is corrupt and can't proceed on A2017U.
Click to expand...
Click to collapse
kenet said:
The same thing happens to me after installing.
if you install the FASTBOOT_UNLOCK_EDL_N. The message is deleted but it does not start.
it also encrypts the phone.
Nor can you listen to who calls you.
Click to expand...
Click to collapse
You have to press the power button when that corruption message appears; then plug the phone into your PC after the Linux Penguin is displayed and it should eventually start booting into the ROM. Credit to @WesTD for the solution.
aclegg2011 said:
Says device is corrupt and can't proceed on A2017U.
Click to expand...
Click to collapse
push power button by unlock bootloader message then come the pinguine from linux wait and its boot up but its very bugles for me i go back and wait for a stable relase
Kranoner said:
push power button by unlock bootloader message then come the pinguine from linux wait and its boot up but its very bugles for me i go back and wait for a stable relase
Click to expand...
Click to collapse
Sure thing...too buggy.
It's only a too premature, " never had to be leaked " ROM.
There's only one guy who received this "update" imo and too risky (relative ofcourse) to continue on this ROM.
So imo better to be on a stable rom as MF5.0 then on unstable MF5.2 oreo i guess AND wait for a FULL WORKING release by ZTE itself.
This ROM is are unuseful for now. There are too many bugs. No sound on calling on my U model.
I'll wait for Oreo on U devices. I think it will be better on MiFavor 4.2
Could someone check if Project Treble works?
https://www.xda-developers.com/project-treble-android-oreo/
Also could someone check for camera api2? https://play.google.com/store/apps/details?id=pl.vipek.camera2_compatibility_test&hl=en
Anyone installed Playstore? With open GAPPS i get FC during install wizard. any ideas please?
Can someone in terminal do
Code:
getprop ro.treble.enabled
baggerbodo said:
Anyone installed Playstore? With open GAPPS i get FC during install wizard. any ideas please?
Click to expand...
Click to collapse
Just download APK from apkmirror and install it. Working
bkores said:
Can someone in terminal do
Code:
getprop ro.treble.enabled
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Damn!
runderekrun said:
Also could someone check for camera api2? https://play.google.com/store/apps/details?id=pl.vipek.camera2_compatibility_test&hl=en
Click to expand...
Click to collapse
No, still no camera2 api
Related
ROM MASTER - BACKUP / RESTORE TOOL for QUALCOMM and MEDIATEK DEVICES.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*We're not responsible for any kind of bricked devices
*We're not responsible for any kind of lost warranty devices
*If you point at us, We laugh at you
ROM MASTER BACKUP or RESTORE TOOL
INSTALL IT and YOU WILL FIND SHORTCUT ON DESKTOP..
SELECT BACKUP / RESTORE:
BACKUP OPTION can BACKUP STOCK / CM / CM BASED ROM's
RESTORE YOURS ROMS
AFTER YOU BACKUP COPY ALL TH FILES include (PARTITIONS_%day%_%date_%year%.txt) to other folder
WHEN YOU WANT TO RESTORE PLACE THEM IN BACKUP01_01 and start APP AGAIN and SELECT RESTORE.
ENJOY USING IT
ROM MASTER build4...there were already 3 builds which were unsuccessful but they were uploaded so we fixed bugs and all and uploaded new. with new INTERFACE and EXE MODES.
CLICK HERE TO DOWNLOAD
XDA:DevDB Information
ROM BACKUP-RESTORE TOOL, Tool/Utility for the OEM Cross Device Development
Contributors
MICKEY_ANDRO100
Version Information
Status: Stable
Created 2016-03-06
Last Updated 2016-03-06
Does it need root acess ??
Virus Alert!!
It's detecting as a virus in MSE.
Your upload is suspicious
Nuh99 said:
It's detecting as a virus in MSE.
Your upload is suspicious
Click to expand...
Click to collapse
No sir they only contain adb files to run them batch files and few DLLs that it!
Here...
The PRIMARY DOWNLOAD is detecting virus but alternative downloads works fine.
See the attachment please.
this tool support android 5.0 and above ?
thank you bro
best regard
sassylinn said:
this tool support android 5.0 and above ?
thank you bro
best regard
Click to expand...
Click to collapse
Yes!
Nuh99 said:
The PRIMARY DOWNLOAD is detecting virus but alternative downloads works fine.
See the attachment please.
Click to expand...
Click to collapse
I don't know why, Android File Host is most clean and best servicing host. Don't know why happenening like this
help
how can i use this to backup and transfer to another phone a firmware?
mithun mpk said:
Does it need root acess ??
Click to expand...
Click to collapse
Bump... ??
need help
is this working on asus zenfone 3 max 5.5 sir ?
Will this work on 2ND GEN SEED?
Can this backup stock roms aka. Firmware? Such as my ZTE blade S7? Because I cant find any stock firmware for my phone... So... Just thinking of giving a simple backup and upload it to the net for other people to easily find and download it...
It recovers Hard bricked boot loop ?
I was using the latest camera fix build of lineage os 7.1.2 from 2weeks on sprout 4 mtk6582 but suddenly every app starts force stop yesterday night and when i restarted the phone it hangs on lineage os loading screen. then i tried to boot into recovery mode to flash lineage rom again but the recovery was also not working . The i tried to flash the stock lollipop rom for spice dream uno using sp tools and that also didnt worked and the phone goes to bootloop i.e when connected to pc using usb cable it connects and disconnects each second. Please someone help if you can. The phone doesnt even show any screen nor fastboot mode or recovery , totally black screen. Please tell any solution to install the stock rom or lineage rom. If this app can help repair my android one sprout 4 then please help me.
Doesn't do much if anything.
You need ROOT already before you can "backup" the ROM. So those trying to get the ROM so you can root are going to be disappointed.
Then something funny happens when you use the uninstall available through the start menu. A program restore.exe gets quarantined by my anti-virus.
My advice, forget it.
bardell3600 said:
Doesn't do much if anything.
You need ROOT already before you can "backup" the ROM. So those trying to get the ROM so you can root are going to be disappointed.
Then something funny happens when you use the uninstall available through the start menu. A program restore.exe gets quarantined by my anti-virus.
My advice, forget it.
Click to expand...
Click to collapse
It is possible to backup some without root. I have done so with a Qualcomm 8917 soc based phone with QPST.
Good looking out on this app. Who knows what restore.exe could be. Maybe some kind of packed advertising malware that came with his installer he used. Usually common on stuff like this so creator of installer and even person using it receives $ everything from installs to impression views etc.
TWRP 3.2.1-0 for Nokia 6
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Official custom recovery for Nokia 6, built from source by me.
Yes that's right, another TWRP for our Nokia 6, tested on my TA-1021. Of course, you must have unlocked bootloader for this to work.
Mine's the newest version, 3.2.3-0. And it's in English, too
Downloads are here: https://twrp.me/nokia/nokia6.html , and the device tree you can find below. Install via fastboot or from TWRP if you already have the chinese version installed.
XDA:DevDB Information
TWRP 3.2.3-0 for Nokia 6, Tool/Utility for the Nokia 6
Contributors
evilracer123
Source Code: https://github.com/racer123/android_device_nokia_PLE
Version Information
Status: Testing
Created 2018-03-13
Last Updated 2018-10-17
Thanks a lot! However, have you ever tried to downgrade the bootloader and flash it to Oreo?
I was thinking about that, but does the Oreo boot.img work with nougat bootloader? If it does, that could solve some problems
evilracer123 said:
I was thinking about that, but does the Oreo boot.img work with nougat bootloader? If it does, that could solve some problems
Click to expand...
Click to collapse
Yes, that's what I've tested before.
In fact, the homebrew "Stock" firmware I released before replaced the service bootloader from Nougat, and bootable. The only problem that booting Chinese TWRP 3.1.1-0 from it is the data can't be mounted.
Yesterday I also made and tested the Homebrew Android 8.1 firmware from leaked OTA packages. (Firmware version: D1C-5550-0-00CN-B01)
I'm uploading homebrew "Stock" firmware 522A for TA-1021 (Codename PLE) with service bootloader replaced. You can easily gain access of partition flashing with a single command once this firmware flashed - or just hack the updater-script in OTA packages released before flashing.
hikari_calyx said:
I'm uploading homebrew "Stock" firmware 522A for TA-1021 (Codename PLE) with service bootloader replaced. You can easily gain access of partition flashing with a single command once this firmware flashed.
Click to expand...
Click to collapse
This sounds interesting for sure, keep us updated :good:
evilracer123 said:
This sounds interesting for sure, keep us updated :good:
Click to expand...
Click to collapse
You know the command that enable partition flashing, right?
fastboot oem dm-verity [md5 checksum of your phone's serial number]
hikari_calyx said:
You know the command that enable partition flashing, right?
fastboot oem dm-verity [md5 checksum of your phone's serial number]
Click to expand...
Click to collapse
Yes, I've read about that.
so for now, the only way to flash is downgrade to nougat?
Thanks for this. Flashed on my ta-1033 and it appears to work well! I'll abuse it properly over the weekend and see if anything breaks.
evilracer123 said:
Yes, I've read about that.
Click to expand...
Click to collapse
OK, released.
If you meet md5 error after flashing, just ignore that and force reboot the phone.
hikari_calyx said:
OK, released.
If you meet md5 error after flashing, just ignore that and force reboot the phone.
Click to expand...
Click to collapse
Where can I get it?
E: nevermind, found it!
hikari_calyx said:
OK, released.
If you meet md5 error after flashing, just ignore that and force reboot the phone.
Click to expand...
Click to collapse
After flashing, just Download mode boot loop went back to 7.1.1 for now...
evilracer123 said:
After flashing, just Download mode boot loop went back to 7.1.1 for now...
Click to expand...
Click to collapse
Did you close OST LA after flashing and do format data procedure? You must format userdata in fastboot first, then TWRP.
I found your recovery still can't mount data with Android O. @xinkid is working on it.
hikari_calyx said:
I found your recovery still can't mount data with Android O. @xinkid is working on it.
Click to expand...
Click to collapse
Yes, I noticed the same. I guess we need newer kernel and/or different crypto binaries.
Have you been able to root Oreo yet? All of my attempts failed.
evilracer123 said:
Yes, I noticed the same. I guess we need newer kernel and/or different crypto binaries.
Have you been able to root Oreo yet? All of my attempts failed.
Click to expand...
Click to collapse
Yes, I succeed with Magisk Root method.
Will release 4 days later.
hikari_calyx said:
Yes, I succeed with Magisk Root method.
Will release 4 days later.
Click to expand...
Click to collapse
Waww it's surprised for us ... I am very happy to hear that
Meanwhile, I made Magisk work on the Nougat ROM: (sorry, in finnish)
Maybe I should upgrade to Oreo?
evilracer123 said:
Meanwhile, I made Magisk work on the Nougat ROM: (sorry, in finnish)
Maybe I should upgrade to Oreo?
Click to expand...
Click to collapse
I see you have a TA-1021. The homebrew oreo firmware made by hikari_calyx does not get flashed with OST LA 6.0.4. Maybe you gonna help us root Oreo some other way.
evilracer123 said:
Meanwhile, I made Magisk work on the Nougat ROM: (sorry, in finnish)
Maybe I should upgrade to Oreo?
Click to expand...
Click to collapse
evilracer123 could you help us do what hikari_calyx suggested here https://forum.xda-developers.com/no...sh-custom-recovery-root-t3702354/post75942017
Hi I want to share with you guys how to unlock Bootloader without waiting dan best of part is your data will no wiped
I am not the programmer of this software, I just want to shares
All credit goes to developer: Tapin Recovery Installer
Here's you go
1. Download the software through this Drive link
2. Extract it
3. Open extracted file and install RN10S setup.exe
4. Install driver if you never install it before (included on zip).
5. Open the software
6. Go to "driver" Tab and install KC driver 64bit
7. Restart your computer
8. Open the software again, and go to "extra" Tab
9. Choose "unlock "
10. Turn off your phone
11. Press volume up and down then connect it to computer (phone in off state)
12. Mostly failed on first attempt, so repeat it by choose unlock.
13. After finished your can turn on your phone by hold power button.
Finish
I have make a video if you need in this
Thanks very much.
Rishik Y said:
Thanks very much.
Click to expand...
Click to collapse
You're welcome
Easy and clear method. Thanks bro.
bufce said:
Easy and clear method. Thanks bro.
Click to expand...
Click to collapse
You're welcome
what about "Redmi Note 10S (Secret) ? is it working for secret?
M.Z.F said:
what about "Redmi Note 10S (Secret) ? is it working for secret?
Click to expand...
Click to collapse
Theoretically it will work on All mediatek Helio g95 devices , I never heard " Secret " Model before
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
M.Z.F said:
View attachment 5559141
View attachment 5559143
Click to expand...
Click to collapse
I have no idea, you can try if your mobile is mediatek variant..
Dwyor
Works flawless. Thanx man.
SpaZovsky said:
Works flawless. Thanx man
Click to expand...
Click to collapse
You're welcome
M.Z.F said:
what about "Redmi Note 10S (Secret) ? is it working for secret?
Click to expand...
Click to collapse
We're same model bro. Do you have any luck unlocking it??
codei5503 said:
I have no idea, you can't try if your mobile is mediatek variant..
Dwyor
Click to expand...
Click to collapse
We're on same model. My redmi n10s is mediatek variant also.
pumpkin072618 said:
We're on same model. My redmi n10s is mediatek variant also.
Click to expand...
Click to collapse
If you experienced enough on flashing and rooting you can try it and report
codei5503 said:
Hi I want to share with you guys how to unlock Bootloader without waiting dan best of part is your data will no wiped
I am not the programmer of this software, I just want to shares
All credit goes to developer: Tapin Recovery Installer
Here's you go
1. Download the software through this Drive link
2. Extract it
3. Open extracted file and install RN10S setup.exe
4. Install driver if you never install it before (included on zip).
5. Open the software
6. Go to "driver" Tab and install KC driver 64bit
7. Restart your computer
8. Open the software again, and go to "extra" Tab
9. Choose "unlock "
10. Turn off your phone
11. Press volume up and down then connect it to computer (phone in off state)
12. Mostly failed on first attempt, so repeat it by choose unlock.
13. After finished your can turn on your phone by hold power button.
Finish
I have make a video if you need in this
Click to expand...
Click to collapse
Just an update. This method also works on Redmi Note 10s with a "Secret" model. Thanks sir. Onto rooting next! Cheers!
pumpkin072618 said:
Just an update. This method also works on Redmi Note 10s with a "Secret" model. Thanks sir. Onto rooting next! Cheers!
Click to expand...
Click to collapse
Thanks for testing, and happy for u
pumpkin072618 said:
We're on same model. My redmi n10s is mediatek variant also.
Click to expand...
Click to collapse
yes while practicing on an old windows 10 had no luck, but as soon as i tried on window 10 (Fresh installed) , boom it worked and i shifted to INDO rom.
Mmmm not sure about this... Defender INMEDIATELY jumped with a virus alert which is suspicious to say the least. Considering the only thing it is supposed to do is bypassing the Xiaomi account and sending fastboot commands to the phone, I don't understand why it would come up as a virus. Furthermore, I passed through VirusTotal and same thing happend (only one warning, not a billion as sometimes happens but still). I've notices a significant slowing down of my Windows machine after installing the software. I could be mistaken, could be a fase positive... but no one metioning this, no warining in the OP post warning about this... I'm not using it, sorry. I doen't inspire any confidence in my opinion.
Jaki1122 said:
Mmmm not sure about this... Defender INMEDIATELY jumped with a virus alert which is suspicious to say the least. Considering the only thing it is supposed to do is bypassing the Xiaomi account and sending fastboot commands to the phone, I don't understand why it would come up as a virus. Furthermore, I passed through VirusTotal and same thing happend (only one warning, not a billion as sometimes happens but still). I've notices a significant slowing down of my Windows machine after installing the software. I could be mistaken, could be a fase positive... but no one metioning this, no warining in the OP post warning about this... I'm not using it, sorry. I doen't inspire any confidence in my opinion.
Click to expand...
Click to collapse
It's your choice, no one will force you to use this method
Just use a normal method from xiaomi if you afraid to install this software.
Yes of course, it's nice to have more options it's just I don't feel great about this one for some reason.
I've already unlocked my bootloader and to be honest it's gonna be the last I ever unlock from Xiaomi as I'm never choosing them again, at least till they change a lot of things, I'm done with their crap.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Project Arcana for Akatsuki (Xperia XZ3)
What is this?
*Project Arcana is a simple rom, fueled by Pixel Experience that aims to be simple yet cunning. Project Arcana provides necessary
customization that is needed for every day life, from your traffic indicator down to your favorite icon styles.
While also promising to be simple, Project Arcana was made to be aesthetic without making its users go through a lot
of configurations. Project Arcana is a fan of simplicity. We strive to keep the ROM bloat free and fast.
Based on Android 12
Whats working?
Wi-Fi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
Fingerprint reader
Lights
Sound/vibration
Known issues
As my device is AU variant,cant test the NFC,Please report if it's working for you
You tell me
Android OS version: Android 12
Security patch level: January 2022
Build author/Device Maintainer: Alief Irawan
Device Source code: https://github.com/sony-sdm845
Source code: https://github.com/projectarcana-aosp
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Downloads
very good rom. however when i enable google services my phone is slow. In addition, the sound of the bottom speaker seems to be distorted
Where can I find a build without gapp?.
Nfc is working in XZ3 dual
zz7Duong7zz said:
very good rom. however when i enable google services my phone is slow. In addition, the sound of the bottom speaker seems to be distorted
Click to expand...
Click to collapse
Its a common issue.. gonna try to fix it..
zz7Duong7zz said:
Where can I find a build without gapp?.
Click to expand...
Click to collapse
There is still no vanilla build,sorry..
zz7Duong7zz said:
Where can I find a build without gapp?.
Click to expand...
Click to collapse
Tenun said:
Nfc is working in XZ3 dual
Click to expand...
Click to collapse
Thanks for the report..
Fhcker90 said:
Its a common issue.. gonna try to fix it..
Click to expand...
Click to collapse
yes. Thank you for your efforts and hard work
Fhcker90 said:
Its a common issue.. gonna try to fix it..
Click to expand...
Click to collapse
when i disable "ok google" in settings. that issue has been resolved on this build. Maybe the problem lies with Google Assistant
If anyone wanna test my build.. please send message to my telegram account @ara_ara69
Thanks!
Regards : Alief
how do you unlock bootloader for this phone (AU)? I don't think there's a way to install rom without TWRP or smth
Is camera 2PI enabled in this rom ? And im' totally a newbie . Any installation guide for this rom ?
andtrash69 said:
how do you unlock bootloader for this phone (AU)? I don't think there's a way to install rom without TWRP or smth
Click to expand...
Click to collapse
If you have unlocked the bootloader, you can install it via fastboot.
Rachsutha said:
If you have unlocked the bootloader, you can install it via fastboot.
Click to expand...
Click to collapse
Bro, do you have any installation guide ? Please help me out :. I'm a newbie.
shababahmedtazin said:
Bro, do you have any installation guide ? Please help me out :. I'm a newbie.
Click to expand...
Click to collapse
You must load the rom first.
and load the file in this link
Fastboot Dumper.zip - Share Files Online & Send Larges Files with TeraBox
Fastboot Dumper.zip - Please input the extraction code to send large files and share files online with TeraBox.
www.terabox.com
Rachsutha said:
You must load the rom first.
and load the file in this link
Fastboot Dumper.zip - Share Files Online & Send Larges Files with TeraBox
Fastboot Dumper.zip - Please input the extraction code to send large files and share files online with TeraBox.
www.terabox.com
Click to expand...
Click to collapse
Extract fastboot dumper to get fastboot flash tool and payload dumper and extract both, open rom file, put payload.bin into payload_input. and double click payload dumper.exe wait until all files extracted will go to payload_output then put all files in payload_output move to fastboot flash tool / phone into fastboot category by pressing and holding volume up and plug it into the computer. The light shows blue, then double click flash.bat. Wait for it to finish.
Rachsutha said:
You must load the rom first.
and load the file in this link
Fastboot Dumper.zip - Share Files Online & Send Larges Files with TeraBox
Fastboot Dumper.zip - Please input the extraction code to send large files and share files online with TeraBox.
www.terabox.com
Click to expand...
Click to collapse
I'm sorry bro. I'm bot getting you . :') can you please explain?
Rachsutha said:
If you have unlocked the bootloader, you can install it via fastboot.
Click to expand...
Click to collapse
i mean how can you unlock the bootloader? I think all AU version is UBL NO on Rooting System, so you cant unlock it unless it says yes
andtrash69 said:
ฉันหมายถึงคุณจะปลดล็อค bootloader ได้อย่างไร ฉันคิดว่าเวอร์ชัน AU ทั้งหมดคือ UBL NO บน Rooting System ดังนั้นคุณจึงปลดล็อกไม่ได้เว้นแต่จะแจ้งว่าใช่
Click to expand...
Click to collapse
you can unlock by losing credit to unlock
Sony Xperia Cable Unlock / FRP Removal – 0 Counter Supported – qUnlock S1 Unlock Tool
networkunlocking.com
This rom can connect to the PS4 controller？？
Ok guys per request i will post my personal Pixel 7 lineage rom . Is update to december and it has the minimal gapps built inline . I will call it Beta but all i use daily is working for me . I know face unlock is not working because never add the commits . It wont pass the safety net unless rooted but again i dont use it , also all apps from play-store are working . Maybe will update maybe not will see . Cheetah is booting too but apps is force close and cant fix now because i dont got the device . So please dont ask a lot of questions ! Installing is simple , be on December , wipe factory default from recovery and fastboot update the name.zip .
kernel surce https://github.com/LineageOS/android_kernel_google_gs201
vendor surce https://gitlab.com/the-muppets/proprietary_vendor_google_panther
Dt surce https://github.com/LineageOS/android_device_google_pantah
Here is the link to my google drive : https://mega.nz/file/I0J2wa7J#2_AYh0jC5UEk3Lmcf5DY1k8WWMKubCmB15yI-vGtza0
Will need a cheetah experienced user who can take some adb logs , sometimes this weekend.
@alin919 Please check your PM inbox. Thank you.
-Regards: Badger50
Is it possible to update from lineage-20.0-20221117-UNOFFICIAL-panther.zip?
fischli said:
Is it possible to update from lineage-20.0-20221117-UNOFFICIAL-panther.zip?
Click to expand...
Click to collapse
Yes
hi, is it possible to have builds without gapps built in?
will this work on january update?
I don't want to do a full wipe. It would be nice to have a ROM like the one from November, which you can simply install in recovery. Too bad it probably won't be available any time soon.
fischli said:
I don't want to do a full wipe. It would be nice to have a ROM like the one from November, which you can simply install in recovery. Too bad it probably won't be available any time soon.
Click to expand...
Click to collapse
I might update this weekend .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
alin919 said:
View attachment 5821337
Click to expand...
Click to collapse
This is exciting. How's the battery life? I'm not too impressed with the stock ROM battery performance. I unlocked my bootloader just waiting to hear some feedback before I try it.
mewcatchew said:
This is exciting. How's the battery life? I'm not too impressed with the stock ROM battery performance. I unlocked my bootloader just waiting to hear some feedback before I try it.
Click to expand...
Click to collapse
Lineage always got better battery life then stock
alin919 said:
Lineage always got better battery life then stock
Click to expand...
Click to collapse
alin919 said:
Lineage always got better battery life then stock
Click to expand...
Click to collapse
Ok, where can I get it? the mega.nz file is from Jan 5th
mewcatchew said:
Ok, where can I get it? the mega.nz file is from Jan 5th
Click to expand...
Click to collapse
Will update tonight .
Updated to January ........
I appreciate the work! I've downloaded your updated build, bootloader is unlocked & ready to flash,,, Just not sure how to flash it (I'm good at following directions). I really haven't done much flashing since the Galaxy S5 & S6, and that was with Odin. I'm guessing with the Pixel 7 it's done with some fastboot commands and pretty simple, just don't know the procedure.
mewcatchew said:
I appreciate the work! I've downloaded your updated build, bootloader is unlocked & ready to flash,,, Just not sure how to flash it (I'm good at following directions). I really haven't done much flashing since the Galaxy S5 & S6, and that was with Odin. I'm guessing with the Pixel 7 it's done with some fastboot commands and pretty simple, just don't know the procedure.
Click to expand...
Click to collapse
check the OEM unlock box on dev options, then reboot to fastboot
fastboot flashing unlock
fastboot -w update name_of_rom.zip
MarcLmao said:
check the OEM unlock box on dev options, then reboot to fastboot
fastboot flashing unlock
fastboot -w update name_of_rom.zip
Click to expand...
Click to collapse
Bootloader is already unlocked. So just one command "fastboot -w update name_of_rom.zip" ? Do I need to factory reset before I boot or anything?
There are flashing instructions on this, the command I supplied is wrong, my mistake Its a build for Panther and Cheetah, ive used his roms in the past and can vouch for them
[ROM][UNOFFICIAL][cheetah/panther] LineageOS 20.0 for the Pixel 7 Pro/7
LineageOS 20.0 for the Pixel 7 Pro (cheetah) and Pixel 7 (panther). Known issues: NOTE: This is an early-stage build, and may not be the most stable. It works fine for me as a daily driver on a Pixel 7 (panther), however. The status bar is...
forum.xda-developers.com
mewcatchew said:
Bootloader is already unlocked. So just one command "fastboot -w update name_of_rom.zip" ? Do I need to factory reset before I boot or anything?
Click to expand...
Click to collapse
MarcLmao said:
There are flashing instructions on this, the command I supplied is wrong, my mistake Its a build for Panther and Cheetah, ive used his roms in the past and can vouch for them
https://forum.xda-developers.com/t/...h-panther-lineageos-20-0-for-the-pixel-7-pro-
Click to expand...
Click to collapse
*EDIT" Just tap power & up keys for half a second. I was long pressing them.
How do I boot into recovery from fastboot? I can select " Recovery mode" but it boots a dead android and under it says "no command" . I'm just doing a dry run, I don't feel like bricking my phone. I'm stuck on step "8." of the link you sent.