Related
WARNING! ONLY USE THIS ON THE GT-I9192 MODEL!
Hello all S4 Mini owners!
I'm happy to finally release ClockworkMod recovery and an insecure kernel for the GT-I9192. With these two installed on your device, obtaining root is easy.
Attached to this post is the necessary files needed for this task. Download the following files:
Odin_v3.09.zip (if you don't have it already)
recovery-clockwork-6.0.5.1-serranodsdd.tar.zip
S4Mini_RootKit_v2.zip (contains SuperSU v1.89 and BusyBox v1.21.1)
Extract recovery-clockwork-6.0.5.1-serranodsdd.tar.zip file to your computer.
The procedure is as:
Copy the "S4Mini_RootKit_v2.zip" to your device SD card.
Turn off the phone.
Press and hold home, volume down and power. Download screen should appear.
Connect USB cable, and press volume up.
Start Odin, uncheck "F. Reset Time", and then click AP button.
Select "recovery-clockwork-6.0.5.1-serranodsdd.tar.md5" file that you previously extracted, and press Start button. The phone will reboot when finished.
After the phone resets (it vibrates) IMMEDIATELY hold volume up and home buttons to boot into recovery mode.
Select the option to install the ZIP file you have previously copied to your device and begin flashing it.
After flashing using CWM, reboot into system and enjoy your rooted device.
To get rid of the the warnings about applications doing not permitted actions, delete the following files from system/app, or let SuperSU fix it for you.
KNOXAgent.apk
KNOXStore.apk
ContainerAgent.apk
Link to a test build of CM 10.2 coming in a bit. Support for multi SIM support was merged into CM earlier, so I thought I'd put out a test build to let you guys test if it's working or not.
CM 10.2 test build: http://goo.im/devs/arco/serranodsub/cm-10.2-20131022-UNOFFICIAL-serranodsub.zip
You need to flash it with the recovery I posted in first post.
arco68 said:
CM 10.2 test build: http://goo.im/devs/arco/serranodsub/cm-10.2-20131022-UNOFFICIAL-serranodsub.zip
You need to flash it with the recovery I posted in first post.
Click to expand...
Click to collapse
Unfortunately, System UI has stopped.
Sim card also not found.
Difference with other rooting methods....???
arco68 said:
WARNING! ONLY USE THIS ON THE GT-I9192 MODEL!
Hello all S4 Mini owners!
I'm happy to finally release ClockworkMod recovery and an insecure kernel for the GT-I9192. With these two installed on your device, obtaining root is easy.
Attached to this post is the necessary files needed for this task. Download the following files:
Odin_v3.09.zip (if you don't have it already)
recovery-clockwork-6.0.4.4-serranodsub.tar.zip
S4Mini_RootKit_v1.zip (contains SuperSU v1.65 and BusyBox v1.21.1)
Extract recovery-clockwork-6.0.4.4-serranodsub.tar.zip file to your computer.
The procedure is as:
Copy the "S4Mini_RootKit_v1.zip" to your device SD card.
Turn off the phone.
Press and hold home, volume down and power. Download screen should appear.
Connect USB cable, and press volume up.
Start Odin, uncheck "F. Reset Time", and then click AP button.
Select "recovery-clockwork-6.0.4.4-serranodsub.tar.md5" file that you previously extracted, and press Start button. The phone will reboot when finished.
After the phone resets (it vibrates) IMMEDIATELY hold volume up and home buttons to boot into recovery mode.
Select the option to install the ZIP file you have previously copied to your device and begin flashing it.
After flashing using CWM, reboot into system and enjoy your rooted device.
To get rid of the the warnings about applications doing not permitted actions, delete the following files from system/app
KNOXAgent.apk
KNOXStore.apk
ContainerAgent.apk
Click to expand...
Click to collapse
Hi...
Appreciate your effort....!!
Could you please tell what is its difference from other rooting methods currently available in xda..??
Does it have BLN support...??
Awaiting your reply....
Thanx in advance.....
---------- Post added at 07:40 PM ---------- Previous post was at 07:10 PM ----------
Eagerly waiting for the working CM 10.2 Rom....!!
Please fix the errors and upload it s early as possible....!!
arco68 said:
CM 10.2 test build: http://goo.im/devs/arco/serranodsub/cm-10.2-20131022-UNOFFICIAL-serranodsub.zip
You need to flash it with the recovery I posted in first post.
Click to expand...
Click to collapse
Thank you, indeed, for all your efforts for i9192! Waiting for this fixed build, I'll test it as soon as you post it here.
I'll try this next week at home
Is this kernel for all regions?
Sent from my GT-I9192 using Tapatalk
Can you try adding the following to build.prop?
ro.telephony.ril.v3=qcomdsds
arco68 said:
Can you try adding the following to build.prop?
ro.telephony.ril.v3=qcomdsds
Click to expand...
Click to collapse
is it change samething?
Alexannino said:
is it change samething?
Click to expand...
Click to collapse
To see if it fixes the sim card not found issue. If not then I don't know what's wrong, as I don't have this phone myself so I can test. Could be that the multi sim stuff in 4.3 isn't compatible with the current drivers available for this phone, and in that case it won't be possible to have a working CM for it.
arco68 said:
Can you try adding the following to build.prop?
ro.telephony.ril.v3=qcomdsds
Click to expand...
Click to collapse
Could you rebuild ROM or create separate flashable zip for correct build.prop, please? Your recovery is incompatible with AROMA filemanager, cannot apply corrections after flashing ROM
Sent from my GT-I9195 using XDA Premium 4 mobile app
---------- Post added at 09:58 PM ---------- Previous post was at 09:53 PM ----------
Arco, the reason we cannot change props file from ROM itself is that device is stuck on welcome screen with SystemUI crash messages.
Sent from my Galaxy S4 Mini GT-I9192
Upd: Editing build.prop did not fix neither no sim/network message, nor systemui force close
Maybe there is something deeper than just drivers? Framework for them, for example? When running I9192 with I9195 ROM, systemui does not perform fc.
Weird. Try removing the following from build.prop. It should work in single sim card mode then.
Code:
# System prop to enable DSDS
persist.dsds.enabled=true
persist.multisim.config=dsds
# System prop for DSDS model *no binding subscription for QMI_WDS* message
persist.radio.dont_use_dsd=true
Is sim card and network working with the 9195 rom?
arco68 said:
Weird. Try removing the following from build.prop. It should work in single sim card mode then.
Code:
# System prop to enable DSDS
persist.dsds.enabled=true
persist.multisim.config=dsds
# System prop for DSDS model *no binding subscription for QMI_WDS* message
persist.radio.dont_use_dsd=true
Is sim card and network working with the 9195 rom?
Click to expand...
Click to collapse
I have to use my I9192 as primiary device on this weekend, so I will test it out after 27th.
Nope, no network (but no empty sim slot message) on official cm roms from I9190 and I9195.
Sent from my Galaxy S4 Mini GT-I9192
arco68 said:
WARNING! ONLY USE THIS ON THE GT-I9192 MODEL!
Hello all S4 Mini owners!
I'm happy to finally release ClockworkMod recovery and an insecure kernel for the GT-I9192. With these two installed on your device, obtaining root is easy.
Attached to this post is the necessary files needed for this task. Download the following files:
Odin_v3.09.zip (if you don't have it already)
recovery-clockwork-6.0.4.4-serranodsub.tar.zip
S4Mini_RootKit_v1.zip (contains SuperSU v1.65 and BusyBox v1.21.1)
Extract recovery-clockwork-6.0.4.4-serranodsub.tar.zip file to your computer.
The procedure is as:
Copy the "S4Mini_RootKit_v1.zip" to your device SD card.
Turn off the phone.
Press and hold home, volume down and power. Download screen should appear.
Connect USB cable, and press volume up.
Start Odin, uncheck "F. Reset Time", and then click AP button.
Select "recovery-clockwork-6.0.4.4-serranodsub.tar.md5" file that you previously extracted, and press Start button. The phone will reboot when finished.
After the phone resets (it vibrates) IMMEDIATELY hold volume up and home buttons to boot into recovery mode.
Select the option to install the ZIP file you have previously copied to your device and begin flashing it.
After flashing using CWM, reboot into system and enjoy your rooted device.
To get rid of the the warnings about applications doing not permitted actions, delete the following files from system/app
KNOXAgent.apk
KNOXStore.apk
ContainerAgent.apk
Click to expand...
Click to collapse
I am running I9192UBUAMH2.
I was able to flash the recovery you posted, however I can't enter on it with VOL UP+HOME+PWR. Simply got a blank screen and after some seconds the phone reboots normally...
Ops, my bad. I got it working...
Thanks!
Arco, i've tried to delete persist.dsds.enabled etc. strings, systemui works now, but no network. What exactly did you modify in this CM build? Any information helps
Sent from my Galaxy S4 Mini GT-I9192
Corias said:
Arco, i've tried to delete persist.dsds.enabled etc. strings, systemui works now, but no network. What exactly did you modify in this CM build? Any information helps
Sent from my Galaxy S4 Mini GT-I9192
Click to expand...
Click to collapse
Take a look here:
https://github.com/arco/android_device_samsung_serranodsub
https://github.com/arco/android_vendor_samsung_serranodsub
That should be all you need to build for the I9192. I'm not sure why network isn't working on this device, but it might be because the multi-sim for 4.3 that CM integrated doesn't work properly with the 4.2 libs from stock rom.
touch version
Hi,
is possible to realize the touch version of this recovery?
thanks
My co-worker...just got the samsung s 4 mini dous about a week ago (model number GT-I9192). I want to help her root...but her baseband and build number both end with "XXXUAMH2" and doesnt match the number shown on the first post of this thread. She has checked to see if there was a system update, but the phone says its up to date. Can her phone still be rooted using the file on this thread or do she need a new set of files? I have searched the form for rooting information for her phone...but all I see is info for the other models Ex. I9190 and I9195 etc....
Perhaps someone can point us in the right direction. any help would be appreciated. Thanks!
Yes you can root with this method but I suggest to flash stock kernel again after root
Sent from my GT-I9192 using Tapatalk
fburgos said:
Yes you can root with this method but I suggest to flash stock kernel again after root
Sent from my GT-I9192 using Tapatalk
Click to expand...
Click to collapse
Ok great...two things...
First: Where is the stock kernel link?
Second: Why would I need to flash it after?
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
THIS RECOVERY WILL TRIP YOUR KNOX COUNTER ..AND UR WARRANTY WILL BE VOID
THIS RECOVERY IS ONLY FOR THE S5 MINI(G800H) [QCOM MSM8228]
PLEASE BE CAREFUL ... THIS RECOVERY HASNT BEEN TESTED "FULLY"...ONLY WIPE CACHE AND DALVIK CACHE , INSTALL ZIP IS TESTED
PLEASE BACKUP YOUR DATA AND MAKE SURE YOU HAVE A BACKUP OF THE FIRMWARE BEFORE PROCEEDING..HAPPY FLASHING!
Why twrp ? Why not a pre-rooted firmware which will not void warranty?
Ans : TWRP has many more functionality than stock recovery ! Rooting means to playing around with your device.If some thing goes wrong it you have to flash the whole firmware again instead,backup your ROM through CWM and if something goes wrong restore your backup AS SIMPLE AS THAT !
All you have to do is follow my instructions :
STEP 1 :
-Download and setup ADB drivers for your device
can be found here Drivers !
STEP 2 :
-Download the recovery from ---> Link
-Download odin 3 Link
-Turn of your device and go to odin mode [ Vol down + power + home button (all at the same time) ] release it when you see Galaxy S5 Minilogo
-Press vol up to confirm
STEP 3 :
-Now that you are in odin mode connect your device via usb cable !
-Now open Odin3 3.09 that you have downloaded.
-If there is a pop-up like Installing ADB drivers let it get finished it is usually updates !!!!
-Make sure the COM : xx (xx is usb port number it can be any number so dont worry about it,just verify COM is lit up)
-Select the recovery (Link in STEP 2) ! Now select AP and browse to where you have .tar file and select it
MAKE SURE U UNTICK THE AUTO-REBOOT BUTTON
-Click Start
ONCE IT SAYS PASS ...REMOVE THE BATTERY ...THEN RE-INSERT THE BATTERY AND BOOT INTO RECOVERY USING VOL UP + HOME + POWER BUTTON
HOW TO ROOT THE DEVICE :
-Download SuperSu (obviously the latest one) from here ------> Click here !
-Copy that to internal sd card
-Power off your device and press vol up + power + home button (all at once)
-Select install zip from sdcard --->choose zip from sdcard ---> scroll down and flash UPDATE-SuperSU-v2.xx.zip
Done ! And you are ready to go
BUGS
DATA SHOWN TWICE IN ADVANCED WIPE ... WILL BE FIXED IN THE NEXT BUILD
YOU TELL ME [/SIZE]
NOTE : IF ANY OPTION DOESNT WORK FOR U ... TURN OFF UR PHONE AND THEN BOOT INTO RECOVERY
SOURCES
DEVICE TREE
KERNEL(PREBUILT ... THANX TO SAMSUNG ... AVAILABLE IN THE DEVICE TREE)
CREDITS
TWRP TEAM
A BIG THANKS TO @RGold55 FOR TESTING
reserved
:victory:
Thanks for the mention, you're most welcome, bro!
Thank you very much. Let me confirm if it is for g800h dual sim phone.
My G800H/DS works fine with both sim cards -- sim manager, sms, calls, everything is ok.
"-Select the recovery (Link in STEP 2) ! Now select AP and browse to where you have .tar file and select it"
In step 3 how to select the recovery file?
I see PDA button. How to select AP. where is it in odin?
drnag said:
"-Select the recovery (Link in STEP 2) ! Now select AP and browse to where you have .tar file and select it"
In step 3 how to select the recovery file?
I see PDA button. How to select AP. where is it in odin?
Click to expand...
Click to collapse
it depends on the version of odin your using
if your odin has PDA .. then put the recovery there (v 3.07 and before )
if your odin has AP ... Then put the recovery there (v3.09 onwards of odin)
Thank you very much. Done.
cheers
...
Tested
Zip flash ok.
Have a problem... i cannot upgrade my phone to new firmare:
Model: SM-G800F
Model name: GALAXY S5 mini
Country: Italy
Version: Android 4.4.2
Changelist: 1998311
Build date: Fri, 10 Oct 2014 02:45:33 +0000
Product Code: ITV
PDA: G800FXXU1ANJ2
CSC: G800FITV1ANJ1
MODEM: G800FXXU1ANJ2
...after upgrade phone reboot, go into recovery and stopped procedure ?...
In which i can solve it ?
Thnak
Hispa
hispanico957 said:
Have a problem... i cannot upgrade my phone to new firmare:
Model: SM-G800F
Model name: GALAXY S5 mini
Country: Italy
Version: Android 4.4.2
Changelist: 1998311
Build date: Fri, 10 Oct 2014 02:45:33 +0000
Product Code: ITV
PDA: G800FXXU1ANJ2
CSC: G800FITV1ANJ1
MODEM: G800FXXU1ANJ2
...after upgrade phone reboot, go into recovery and stopped procedure ?...
In which i can solve it ?
Thnak
Hispa
Click to expand...
Click to collapse
why did you flash this one??? This is for the G800H .. yours is G800F
G800F:
http://forum.xda-developers.com/showthread.php?t=2922938
Sent from my SM-G800H/DS
can anyone reup the file? it is not longer available on basketbuild.com
Thanks!
mindestens said:
can anyone reup the file? it is not longer available on basketbuild.com
Thanks!
Click to expand...
Click to collapse
I have no clue how the file disappeared but I'll upload it again .. Wen I'm back from college
rutvikrvr said:
I have no clue how the file disappeared but I'll upload it again .. Wen I'm back from college
Click to expand...
Click to collapse
Thank you! Flashed now and works perfect!
Works fine on my G800H/DS. It wont write to the external SD (64GB eXFat) but otherwise it works like a champ.
hello rutvikrvr,
2 short questions.. is it possible to adjust the time settings for different time zones (eg +1 for europe / vienna) ?
If i make a backup to the internal sd i cannot see any content in the TWRP folder with eg. es file explorer, only when i boot with recovery and use the present file manager.. is it a bug or intention?
Thanks!
mindestens said:
hello rutvikrvr,
2 short questions.. is it possible to adjust the time settings for different time zones (eg +1 for europe / vienna) ?
If i make a backup to the internal sd i cannot see any content in the TWRP folder with eg. es file explorer, only when i boot with recovery and use the present file manager.. is it a bug or intention?
Thanks!
Click to expand...
Click to collapse
In advanced settings you should get an option to change the time zone.... And for the second thing... If es file explorer doesn't support reading .ext4 files .. Then it won't show up
rutvikrvr said:
In advanced settings you should get an option to change the time zone.... And for the second thing... If es file explorer doesn't support reading .ext4 files .. Then it won't show up
Click to expand...
Click to collapse
Yes, i found this setting - BUT if I set the time zone to UTC +1 (Berlin, Brussels, Paris) - the correct time zone for vienna too - the time is shown as 8:43 pm - but it is now 7:43 pm - so i think the winter / summertime is not considered?
The second thing.. in the TWRP folder it is a folder called backup and in this also a folder.. if i copy the whole TWRP Folder with the file manager from the recovery to the external sd - i CAN see the whole content from the TWRP folder with ES File Explorer .. on the internal sd not.. Strange
Easier way to install Android M Boot animation on Z2 if you have a rooted recovery:
No need to change resolution, permissions, move file or anything else.
1. Download https://mega.nz/#!ZQlygQoD!cjWbEkNN7...UQ304wNbL_HMRg .
2. Reboot into recovery and install the zip file.
3. Reboot and enjoy it.
This is how & what I did on my 6503.
Works perfectly! Looks great!
Glenn
Please fix the Link
Sent from my D6503 using XDA Free mobile app
This is weird, I remembered it worked, but now link is broken
broken link
You have to enter a decryption code to access the file... Please fix the link
Please fix the link, need key decrypt
Link don't work, please fix it
First of all i want to make sure one thing to all the developers and users in this forum. I am not the developer of this rom. I am just sharing the work of a Great Developer. So i request everyone not to use any feature of this rom in yours. If you want to, then please ask proper permissions from the actual developer and give proper credits. Please must follow this
CAUTION: I will not be responsible for anything that will happen to your device while flashing or using this rom. Not even the developers too. You are solely responsible for everything that will happen to your device while using this ROM. Mind that Dudes
READ THIS FIRST
1. I am sharing this work here from some other forum with the permission of the developer.
2. So please don't ask for ETA's of updates.
3. If any one facing any new bug, please report here, but don't ask questions like "when it will be solved"?
4. It will be notified to the developer and it will be resolved off gradually.:good::good:
5. Don't use Harsh Language while posting in the comment sections.
Prerequisites:
1. You Must have the Stock Kitkat 4.4.2 in your phone before flashing this.
2. You must have the CWM recovery/Philz Recovery installed in your phone (Highly Recommended)
ROM FEATURES
1. Multiwindow
2. UPSM Mode
3. Private Mode
4. Toolbox
5. Statusbar Settings
6. Advanced Power-Off Settings
7. Animation Settings
8. Dynamic Statusbar
9. One Handed Operation
10. Circle Sidebar
11. Gesture Anywhere
12. Guest Mode
13. USB Fast Charge Support
14. Themes Support and So On........
Installation Instructions
1. First download the Firmware Package from below links.
For GT I9192 Users: https://yadi.sk/d/FwwmUW6knq3rS
For GT I9190 Users: https://yadi.sk/d/8M2V0av6npiug
For GT I9195 Users: https://yadi.sk/d/cl2m5Ujtnpisi
2. Flash the above firmware through ODIN. Complete the setup
3. Then download the following ROM file...
MOD EDIT
Links removed for containing warez
4. Download the rom from above link. Put it in your sdcard and flash via recovery.
5. The GT I9190 users can flash the rom and reboot the phone. No fixes are needed.
6. For GT I9192 and GT I9195 users, download the following corresponding fixes and place it in sdcard along with the Rom file. Flash the fix immediately after flashing the rom and then reboot. otherwise you may results in bootlop.
For GT I9192 Users: https://yadi.sk/d/QGSI0M8ioXyxe
For GT I9195 Users: https://yadi.sk/d/9P-gP3MPoXyzL
7. That's it..!!!!!
Post installation instructions
1. After flashing the ROM and fixes. No setup screen will come and dont get panic.
2. Also the phone language will be in Russian or serbian i think. Don't panic for that too.
3. Just go to settings (language is not needed for to select settings lol) and look for the language and input option...you can easily find it out. Or other wise check the screenshots. And in that you can see the option for language change. Change it to whichever language you want and phone will gets rebooted. Then you can enjoy all the features of the ROM..
4. Attached the screenshots in post #2.
Updates
Update 5.2.2
[/COLOR]
Update 5.3
http://forum.xda-developers.com/showpost.php?p=66420894&postcount=112
Download the above updates and flash through recovery. That's it...[/FONT]
Bugs
1. The GT I9192 users will not be able to see, in which sim they had received the calls in the call logs menu. To solve this problem, use "Zero Dialer" app from the playstore, it'll show you the sim numbers of the calls received.
2. Apps which has the drop down menu option will force closes whenever you press it. (mostly the payment apps only. The solution to this is you can use browser (instead of the app) for that :laugh::laugh::laugh
3. For GT I9192 users, system ui fc occurs if you make calls with the Heads Up option enabled. So don't use that
Miscellaneous Downloads/Fixes
S Planner Fix:: https://yadi.sk/d/F6RCXEfor6JLs
Highly Debloated Stock KK Firmware [GT I9192 only]: https://www.androidfilehost.com/?fid=23991606952601631
Alexax66 Kernel v0.1.2 for proper working of Init.d [for I9192 only]: https://yadi.sk/d/ZrbLcaxLprxiF
Smart manager Zip : https://yadi.sk/d/wRM32G-2nxvw2
Google Contacts and Calender Sync : https://yadi.sk/d/STiGJ3aFkTwjo
Kids Mode Zip: https://yadi.sk/d/D06Jn5Btee3G3 [This kids mode is having some problems, some force closes will occurs, so try this only you need this badly!!!!!!!]
Fantastic Audio Mod
http://forum.xda-developers.com/showpost.php?p=66441061&postcount=121 [Recommended only for music hearing geeks]
For themes: Go to the following link and download the theme packages and flash it through Recovery
http://forum.xda-developers.com/galaxy-s4-mini/themes-apps/theme-collection-theme-chooser-t3060241
For Fonts: Go to the following link, download the Samsungsans apk file and replace it with the original one in the system/app folder
http://forum.xda-developers.com/galaxy-s4-mini/themes-apps/fonts-styles-4-mini-t3119509
(also attached the CWM Recovery files for GT I9192 Only in post #3)
CREDITS
*Ploiki
*Chernoknijnik
*Narkoman88
Additional Credits
"Alexax66" for the Kernel
"Unknown 'VK Forum' Friends" for Additional files and YandexDisk Links
"Silviumik" for the Debloated Stock Firmware for Duos Version
"Fanion" for the themes
"Petravergil" for the fonts
"ruhul5" for the Google Drive Link
"yogi78" for checking the kernel and private mode for Duos Version
"syednawaz" for helping out the GT I9190 users
and most importantly "The XDA Community"
Update 5.3
http://forum.xda-developers.com/showpost.php?p=66420894&postcount=112
Download the above updates and flash through recovery. That's it...[/FONT][/SIZE]
Bugs
1. The GT I9192 users will not be able to see, in which sim they had received the calls in the call logs menu. To solve this problem, use "Zero Dialer" app from the playstore, it'll show you the sim numbers of the calls received.
2. Apps which has the drop down menu option will force closes whenever you press it. (mostly the payment apps only. The solution to this is you can use browser (instead of the app) for that :laugh::laugh::laugh
3. For GT I9192 users, system ui fc occurs if you make calls with the Heads Up option enabled. So don't use that
Miscellaneous Downloads/Fixes
S Planner Fix:: https://yadi.sk/d/F6RCXEfor6JLs
Highly Debloated Stock KK Firmware [GT I9192 only]: https://www.androidfilehost.com/?fid=23991606952601631
Alexax66 Kernel v0.1.2 for proper working of Init.d [for I9192 only]: https://yadi.sk/d/ZrbLcaxLprxiF
Smart manager Zip : https://yadi.sk/d/wRM32G-2nxvw2
Google Contacts and Calender Sync : https://yadi.sk/d/STiGJ3aFkTwjo
Kids Mode Zip: https://yadi.sk/d/D06Jn5Btee3G3 [This kids mode is having some problems, some force closes will occurs, so try this only you need this badly!!!!!!!]
Fantastic Audio Mod
http://forum.xda-developers.com/showpost.php?p=66441061&postcount=121 [Recommended only for music hearing geeks]
For themes: Go to the following link and download the theme packages and flash it through Recovery
http://forum.xda-developers.com/galaxy-s4-mini/themes-apps/theme-collection-theme-chooser-t3060241
For Fonts: Go to the following link, download the Samsungsans apk file and replace it with the original one in the system/app folder
http://forum.xda-developers.com/galaxy-s4-mini/themes-apps/fonts-styles-4-mini-t3119509
(also attached the CWM Recovery files for GT I9192 Only in post #3)
CREDITS
*Ploiki
*Chernoknijnik
*Narkoman88
Additional Credits
"Alexax66" for the Kernel
"Unknown 'VK Forum' Friends" for Additional files and YandexDisk Links
"Silviumik" for the Debloated Stock Firmware for Duos Version
"Fanion" for the themes
"Petravergil" for the fonts
"ruhul5" for the Google Drive Link
"yogi78" for checking the kernel and private mode for Duos Version
"syednawaz" for helping out the GT I9190 users
and most importantly "The XDA Community"
To change Language
To change the language after setup see the following screenshots...
CWM Recovery for Duos Users
Flash Via Odin
More Screenshots
there is a problem in power menu doesn't appear
Mo7amed_Gom3a said:
there is a problem in power menu doesn't appear
Click to expand...
Click to collapse
Activate the developer option, go to that and in the last you will see an option called "advanced system settings".
In that, you will see an option with the name "Power off button setting". There you will have all the options for the power menu..
Do not install this !! Its full of viruses and adds !!!! Once you installed you can't uninstall the adds and viruses !!
djares21 said:
Do not install this !! Its full of viruses and adds !!!! Once you installed you can't uninstall the adds and viruses !!
Click to expand...
Click to collapse
Viruses and adds?!?!?!?!
I don't understand.....
You talking about the stagefright bug?!?!?!
Sent 4m My S4 Mini Duos with S5 "STE" Rom by PLOIKI
djares21 said:
Do not install this !! Its full of viruses and adds !!!! Once you installed you can't uninstall the adds and viruses !!
Click to expand...
Click to collapse
Also what you mean by, "Once you installed you can't uninstall the adds and viruses?" LOL....Its funny....
Because for the past 2 weeks i am using this rom and before that also i used this and i changed to CM 13 and some other MM ports for short time. No problems arised while changing....
Now due to some reasons, i revert back to this.... And moreover some of the users here personally contacted me to give the links of this rom. That's why i created this thread....
And one more thing i am not making any fun of you. But i want you to make clear about the "Viruses and Adds" thing??!!!!!
Was really looking forward to trying it out, what viruses :crying:
Init.d will force close
Hi
If u get Init.d will force close use this kernel Alexax66 0.1.2 for I9192
Hello there. my phone never had kitkat officially so i am using s6&N5 port(which is 4.4).
do i still have to download I9190XXUCOC1_SER.zip? or can i directly flash S5_STE_Rom_v.5.2.1.zip.
because i heard kitkat update bootloader and i do not want my bootloader to be updated as i may want to go for jelly bean.
btw i updated s6 port(kitkat) from NEW S6 n N5 Project thread from jellybean. and worked fine.
okay i flashed it over s6 port(4.4.4). but i got random restarts. then i went in twrp recovery and wiped everything and freshed install only flash S5_STE_Rom_v.5.2.1.zip file. still crashed. i guess i have to follow your instruction but as i said i cant install kitkat stock firmware as it may update the bootloader.
syednawaz said:
okay i flashed it over s6 port(4.4.4). but i got random restarts. then i went in twrp recovery and wiped everything and freshed install only flash S5_STE_Rom_v.5.2.1.zip file. still crashed. i guess i have to follow your instruction but as i said i cant install kitkat stock firmware as it may update the bootloader.
Click to expand...
Click to collapse
You can remove the bootloader files from the stockfirmware.tar file using total commander and flash the firmware
Sent from my ASUS_T00J using XDA Free mobile app
DarkFrenzy said:
You can remove the bootloader files from the stockfirmware.tar file using total commander and flash the firmware
Sent from my ASUS_T00J using XDA Free mobile app
Click to expand...
Click to collapse
little bit more help please. How to do it? which file to delete? and total commander for pc right?
syednawaz said:
little bit more help please. How to do it? which file to delete? and total commander for pc right?
Click to expand...
Click to collapse
Here is a tutorial
http://www.s4miniarchive.com/2013/12/how-to-remove-knox-bootloader-from-new.html?m=1
Rename .tar.md5 to .tar and open using total commander and just
Just remove everything except system.img and boot.img
Then flash from odin
Sent from my ASUS_T00J using XDA Free mobile app
DarkFrenzy said:
Here is a tutorial
http://www.s4miniarchive.com/2013/12/how-to-remove-knox-bootloader-from-new.html?m=1
Rename .tar.md5 to .tar and open using total commander and just
Just remove everything except system.img and boot.img
Then flash from odin
Sent from my ASUS_T00J using XDA Free mobile app
Click to expand...
Click to collapse
have you tried like that for kitkat? i do not want to brick my phone . but if you have tried it i will try as well.
syednawaz said:
have you tried like that for kitkat? i do not want to brick my phone . but if you have tried it i will try as well.
Click to expand...
Click to collapse
Yes i have tried that. U can also try. Just remove all the files except system.img and boot.img then flash then you will have the kitkat firmware installed then u need to flash this rom
Sent from my ASUS_T00J using XDA Free mobile app
after deleting files and then selecting it in odin i get md5 error, binary is invalid. any help plz
and that link is for linux, i do not understand it.
solved. by removing md5. now installing
syednawaz said:
after deleting files and then selecting it in odin i get md5 error, binary is invalid. any help plz
and that link is for linux, i do not understand it.
Click to expand...
Click to collapse
Remove .md5 the firmware should be in xxx.tar not xxx.tar.md5
Sent from my ASUS_T00J using XDA Free mobile app
Note: With this zip file you can flash s219 build directly with SP flash tool no need to flash lollipop rom
Flashing Procedure :
Download the file given at the bottom of the post.
Extract the zip file with any software.
Install all drivers,If u already installed before then leave this step.
Go To MTK_Koleos_flashtool_v5.1536.00.000 Folder and open flash_tool.
Now you will be asked for the scatter file.
Browse the folder to which you have extracted the downloaded zip.
And then go to SW folder and open target_bin folder.
You will find a text file named MT6753_Android_scatter click on it.
Then it takes some time for loading the scatter file.
After that click on download button and connect your device to pc after shutting it down.
The Process will be started and after flashing you will be directly in the S219 Marshmallow Build.
DOWNLOAD LINKS HERE :fingers-crossed::fingers-crossed:
Video Tutorial : https://www.youtube.com/watch?v=0qIU863_PaU
Visit the site : www.atozhacks.blogspot.com
Vijay chandra said:
Note: With this zip file you can flash s219 build directly with SP flash tool no need to flash lollipop rom
Flashing Procedure :
Download the file given at the bottom of the post.
Extract the zip file with any software.
Install all drivers,If u already installed before then leave this step.
Go To MTK_Koleos_flashtool_v5.1536.00.000 Folder and open flash_tool.
Now you will be asked for the scatter file.
Browse the folder to which you have extracted the downloaded zip.
And then go to SW folder and open target_bin folder.
You will find a text file named MT6753_Android_scatter click on it.
Then it takes some time for loading the scatter file.
After that click on download button and connect your device to pc after shutting it down.
The Process will be started and after flashing you will be directly in the S219 Marshmallow Build.
DOWNLOAD LINKS HERE :fingers-crossed::fingers-crossed:
Visit the site : www.atozhacks.blogspot.com
Click to expand...
Click to collapse
this will be very helpfull ..Thankyou
hirencj said:
this will be very helpfull ..Thankyou
Click to expand...
Click to collapse
if u support my work click some adds on my site
Vijay chandra said:
if u support my work click some adds on my site
Click to expand...
Click to collapse
Yeah sure bro..
@Vijay chandra Could you tell me how to retain my personal data n app data while flashing your ROW s219 update. Currently I am on s219 with TWRP 3.0.2 rooted with SuperSU PseudoPro version 2.78 systemless.
Kessang said:
@Vijay chandra Could you tell me how to retain my personal data n app data while flashing your ROW s219 update. Currently I am on s219 with TWRP 3.0.2 rooted with SuperSU PseudoPro version 2.78 systemless.
Click to expand...
Click to collapse
backup data in TWRP ,after flashing this restore that