Related
http://bit.ly/bQfvm6
Thanks Paul
Thanks Paul!
Doesn't work with the 1.31 ROM
Yeah it does...
P
iziy said:
http://bit.ly/bQfvm6
Thanks Paul
Click to expand...
Click to collapse
cheers paul
great the way you have taken the lead on Android
colonel said:
cheers paul
great the way you have taken the lead on Android
Click to expand...
Click to collapse
Anyone successfully rooted? For me dont work
anyone have done it?
unable to root with 1.31. Paul will be updating this tomorrow on how to do with with ver 1.31
http://android.modaco.com/content-page/307487/29-apr-r1-htc-legend-rooting-guide/page/60/#
Anyone rooted their legend that can tell med if the new rom comes with danish locale?
I've tryed to root my NoBrand Legend fw1.31 BL0.43 with No Succes!!
I did the step1 but I cannot enter in recovery mode from bootloader. It appairs a black warning screen and the pc does'nt found the device so I cannot start the step2!
Once I restarted the phone I've the previous setting but in software information I got a ROM no-sign.
Help me!
Pirreballo said:
I've tryed to root my NoBrand Legend fw1.31 BL0.43 with No Succes!!
I did the step1 but I cannot enter in recovery mode from bootloader. It appairs a black warning screen and the pc does'nt found the device so I cannot start the step2!
Once I restarted the phone I've the previous setting but in software information I got a ROM no-sign.
Help me!
Click to expand...
Click to collapse
Don't restart phone on red exclamation screen push power + VOL up button at the same time and u will enter on recovery menu
iziy said:
Don't restart phone on red exclamation screen push power + VOL up button at the same time and u will enter on recovery menu
Click to expand...
Click to collapse
Okay but than i cant instal the update zip. It gives an eror.
iziy said:
Don't restart phone on red exclamation screen push power + VOL up button at the same time and u will enter on recovery menu
Click to expand...
Click to collapse
Ok I did it! Now I've the blue recovery screen but in the bottom of the screen there is written in yellow:
E:Can't open /cache/recovery/command.
So I've the same problem that the PC doen't find the device when I lunch the step2!
Pirreballo said:
Ok I did it! Now I've the blue recovery screen but in the bottom of the screen there is written in yellow:
E:Can't open /cache/recovery/command.
So I've the same problem that the PC doen't find the device when I lunch the step2!
Click to expand...
Click to collapse
Is it branded or unbranded phone which ver of software u have?
iziy said:
Is it branded or unbranded phone which ver of software u have?
Click to expand...
Click to collapse
It's NOBRAND, fw 1.31, bootloader 0.43.
Finally I've root it!
Run all the processes from a lite version of Windows XP!
The difficult part was to configure the drivers of Legend for adb, fastboot and bootloader mode: http://www.mail-archive.com/[email protected]/msg90765.html
After that another possible variant for my success may have been the change of the microSD which I created the Goldcard.
So, from windows, step1 did not give me more the error 42 and was able to load all necessary files on the device, consequently, has also completed the step2!
P.S. single bug found ... greater instability in wifi!
Cannot root my Legend
I have the same problem at Step 2. I get Error: Device not Found when it tries to load files to the phone and to the SD card. And I have that warning symbol on the phone screen. Is there something that you have to do so the computer can find the phone? I have the drivers there. What else do you need to do? Has anybody figured it out?
Thanks for any advice.
Jeff
how long does the step1 take?
I am wondering how long the step1 may take. It is runing since a while...
thanks for any answer....
ferry99 said:
I have the same problem at Step 2. I get Error: Device not Found when it tries to load files to the phone and to the SD card. And I have that warning symbol on the phone screen. Is there something that you have to do so the computer can find the phone? I have the drivers there. What else do you need to do? Has anybody figured it out?
Thanks for any advice.
Jeff
Click to expand...
Click to collapse
Did you pass the step1 without problems?
If any error was encountered, step2 is likely to fail.
Have you checked your ROM/bootloader versions?
win7 x64
Ok. So with win7 x64 the step1 was never done.
I rooted with my mac, that worked fine.
Tried several times to do the update through the settings menu.
Everytime it reboots the screen stays black.
I can turn it on, it vibrates for half a second. I see the Android one screen and the screen turns black. So i tried holding the volume up button and power button but no Dev menu.
So I thought it was bricked but after a few tries it rebooted and says it can't install the update.
I've attached the screenshot of the issue. I've tried it 3 times. It redownloaded the update and failed again.
Any ideas?
FIXED
@RomLover1999: gave the tip to reboot without a sim card, and that seemed to have fixed the problem!
seend said:
Tried several times to do the update through the settings menu.
Everytime it reboots the screen stays black.
I can turn it on, it vibrates for half a second. I see the Android one screen and the screen turns black. So i tried holding the volume up button and power button but no Dev menu.
So I thought it was bricked but after a few tries it rebooted and says it can't install the update.
I've attached the screenshot of the issue. I've tried it 3 times. It redownloaded the update and failed again.
Any ideas?
Click to expand...
Click to collapse
did you tried a factory reset before updating
galardo_2 said:
did you tried a factory reset before updating
Click to expand...
Click to collapse
Nope, but just tried it and it didnt work.
Try booting without sim card
Same and via fastboot method same. Any solution? We need help its a one mi a2 more????
Unfortunately the error is not informative. I had this error when installing November update. The only way I found to see what went wrong is to check logcat during upgrade, but I think it requires root. In the end I flashed the OTA using fastboot. Still didn't get this update. Try opening shell from adb and reading logcat. I don't think anyone can help you unless we know what is 5he reason for failure
RomLover1999 said:
Try booting without sim card
Click to expand...
Click to collapse
Oh my, that worked! :highfive:
Why would something like that even work?
seend said:
Oh my, that worked! :highfive:
Why would something like that even work?
Click to expand...
Click to collapse
The november update has a bug in it that it only boots in english with a simcard inserted , other languages make the screen bug out ( at least that's what I had ) and only boot without a simcard
Worked greatly
Hey folks, just reinforcing the answer: removing the sim card before restart did the trick, the update went smooth.
Thanks @RomLover1999 and @seend
January update failed
Help! My phone is Mi A2 lite. I can't install January update. My phone is rooted and unlocked.
Thank you!
The same problem....
The same problem....anyone help?
nedjog said:
The same problem....anyone help?
Click to expand...
Click to collapse
did you unlock ? ever run TWRP/Magisk or similiar?
luminoso said:
did you unlock ? ever run TWRP/Magisk or similiar?
Click to expand...
Click to collapse
Yes..it is unlock and never use TWRP/Magisk.. any sugestion please?
nedjog said:
Yes..it is unlock and never use TWRP/Magisk.. any sugestion please?
Click to expand...
Click to collapse
I don't know, by I have the exact same issue, I've unlocked to enable camera2api and left it unlocked.
I'll take a look this weekend
luminoso said:
I don't know, by I have the exact same issue, I've unlocked to enable camera2api and left it unlocked.
I'll take a look this weekend
Click to expand...
Click to collapse
Ok, my phone is not rooted.
I was having the same issue. In the past I've unlocked in order to enable camera2api.
December/2018 (V10.0.2.0.PDIMIFJ) to January/2019 (V10.0.3.0) was failing via OTA.
This is how I solved it:
Download V10.0.2.0.PDIMIFJ dump from this thread
Reboot phone to Fastboot mode (vol down+power)
Run flash_all_except_data.sh or if you're in windowsflash_all_except_data.bat
In my case my environment is:
Linux Fedora 29
fastboot version c7815d675 from android-tools package (just make sure you have the latest fastboot)
Using original USB-C cable
After flashing and reboot the OTA update installed normally without any issues
luminoso said:
I was having the same issue. In the past I've unlocked in order to enable camera2api.
December/2018 (V10.0.2.0.PDIMIFJ) to January/2019 (V10.0.3.0) was failing via OTA.
This is how I solved it:
Download V10.0.2.0.PDIMIFJ dump from this thread
Reboot phone to Fastboot mode (vol down+power)
Run flash_all_except_data.sh or if you're in windowsflash_all_except_data.bat
In my case my environment is:
Linux Fedora 29
fastboot version c7815d675 from android-tools package (just make sure you have the latest fastboot)
Using original USB-C cable
After flashing and reboot the OTA update installed normally without any issues
Click to expand...
Click to collapse
When i try this it return me an erro rcho missmatching image and device what does it mean?
Thanks
Mr.Krulez said:
When i try this it return me an erro rcho missmatching image and device what does it mean?
Thanks
Click to expand...
Click to collapse
I´m assuming you have xiaomi a2? it must match codename "jasmine"
luminoso said:
I´m assuming you have xiaomi a2? it must match codename "jasmine"
Click to expand...
Click to collapse
fastboot does say that my product is jasmine
Hello!
I just got this phone today and tried to update (8.0 November security update) and keep getting the same error!
I've tried with and without sim card, tried with and without my google acc, and tried with full battery!
Do not really want to unlock/install rom again... Any ideas?
hello everybody ,, if anyone facing as same my problem
ulocked bootloader and rooted then i received notification for android Pie Update
so i did it but after restart it went to bootloop for 1 hour amd still same problem , any ideas please ?
I had same problem, with MiFlash I put 9.6.10.0 and updated to 9.6.17.0
Pretty happy with this software, stable and everything works. Stay away from Pie, a lot of bugs.
Sent from my Mi A2 using Tapatalk
I had to factory reset
I had same problem. Any solution?
Odesláno z mého X52X pomocí Tapatalk
Cocagy said:
hello everybody ,, if anyone facing as same my problem
ulocked bootloader and rooted then i received notification for android Pie Update
so i did it but after restart it went to bootloop for 1 hour amd still same problem , any ideas please ?
Click to expand...
Click to collapse
If you have unlocked bootloader try with fastboot file & Mi flash tool
http://en.miui.com/download-353.html
Read Method 2: Fastboot : http://en.miui.com/a-234.html
you have to go V9.6.16.0.ODIMIFE (Android O) & after if you want update to 9.6.17 etc...
Factory Reset can not do anything in this case
[Or try with edl mode... https://in.c.mi.com/thread-37902-1-0.html
https://forum.xda-developers.com/showpost.php?p=77327325&postcount=2 ] it is not easy but can be save the device
sry for english
I tried many ways with different roms but nothing worked and bootloader locked at the end .. so i had to reset and install full rom ..anyway there wasn't important data .. thanks for your help
@ i have another question
I installed pie 10.0.2 is there patched boot for magisk and how to enable camera 2 api ..
Cocagy said:
I tried many ways with different roms but nothing worked and bootloader locked at the end .. so i had to reset and install full rom ..anyway there wasn't important data .. thanks for your help
@ i have another question
I installed pie 10.0.2 is there patched boot for magisk and how to enable camera 2 api ..
Click to expand...
Click to collapse
https://forum.xda-developers.com/mi-a2/how-to/xiaomi-mi-a2-android-9-pie-update-t3868101
see & here : https://forum.xda-developers.com/mi-a2/how-to
Cocagy said:
I tried many ways with different roms but nothing worked and bootloader locked at the end .. so i had to reset and install full rom ..anyway there wasn't important data .. thanks for your help
@ i have another question
I installed pie 10.0.2 is there patched boot for magisk and how to enable camera 2 api ..
Click to expand...
Click to collapse
Can you explain to me how you did to reset everything thank you
Pouvez vous m'expliquer comment vous avez fait pour tout réinitialisier merci
papavegan said:
Can you explain to me how you did to reset everything thank you
Pouvez vous m'expliquer comment vous avez fait pour tout réinitialisier merci
Click to expand...
Click to collapse
I downloaded the official rom from miui 8.1 then flashed it with miflasher then i upgraded it via ota , flashed patched boot for 10.0.1 and made some commands to enable camera 2api for gcam v 6+
Cocagy said:
I downloaded the official rom from miui 8.1 then flashed it with miflasher then i upgraded it via ota , flashed patched boot for 10.0.1 and made some commands to enable camera 2api for gcam v 6+
Click to expand...
Click to collapse
I am in the same situation, but instead of a bootloop, it just gets stuck in the "androidone" screen.
I can access fastboot, but not recovery menu. And of course the bootloader is locked. So I do not even now how to do the factory reset... or flash the official rom... (It always says not possible in lock state from fast boot).
Any help/specific instructions would be appreciated.
Thanks in advance
salchi13 said:
I am in the same situation, but instead of a bootloop, it just gets stuck in the "androidone" screen.
I can access fastboot, but not recovery menu. And of course the bootloader is locked. So I do not even now how to do the factory reset... or flash the official rom... (It always says not possible in lock state from fast boot).
Any help/specific instructions would be appreciated.
Thanks in advance
Click to expand...
Click to collapse
it seems like boot issue ..
If the data in storage not important you can unlock bootloader and it will force you to factory reset
If still same problem then you should flash thought miflasher and download official rom and flash it
Cocagy said:
I downloaded the official rom from miui 8.1 then flashed it with miflasher then i upgraded it via ota , flashed patched boot for 10.0.1 and made some commands to enable camera 2api for gcam v 6+
Click to expand...
Click to collapse
Cocagy said:
it seems like boot issue ..
If the data in storage not important you can unlock bootloader and it will force you to factory reset
If still same problem then you should flash thought miflasher and download official rom and flash it
Click to expand...
Click to collapse
Thanks, at this point I don´t even care about the data... and most of it is backed up.
The problem is that I had not selected the OEM unlock option, the command fasboot oem unlock does not work, and the miflash_unlock tool tells my that my account is not valid to unlock the phone. So I do not really know how to unlock the bootloader. Do you know if there is another way to unlock it/flash, that does not require opening the phone?
Context:
en.miui.com-thread-4697442-1-1
en.miui.com-thread-3560322-1-1
Thanks
For me the problem seems to be related to magisk, once I restored the original boot.img, the phone boots. If I try to flash the magisk patched boot image, it returns to bootloop. I'm using magisk v18 btw. I'm unable to get root using magisk on this PIE version
salchi13 said:
Thanks, at this point I don´t even care about the data... and most of it is backed up.
The problem is that I had not selected the OEM unlock option, the command fasboot oem unlock does not work, and the miflash_unlock tool tells my that my account is not valid to unlock the phone. So I do not really know how to unlock the bootloader. Do you know if there is another way to unlock it/flash, that does not require opening the phone?
Context:
en.miui.com-thread-4697442-1-1
en.miui.com-thread-3560322-1-1
Thanks
Click to expand...
Click to collapse
You can use these commands on fastboot mode .. it should work then try to flash rom
fastboot flashing unlock
fastboot flashing unlock_critical
I have the same problem, stuck in the androidone mode... How do I save my data , if not possible (i have all photos and videos from south america trip there) than how to unlock bootloader and do factory reset ? ^_
norbertpoland said:
I have the same problem, stuck in the androidone mode... How do I save my data , if not possible (i have all photos and videos from south america trip there) than how to unlock bootloader and do factory reset ? ^_
Click to expand...
Click to collapse
If you are lucky, maybe you activated the photo and video backups and the videos/photos from your trips have been uploaded to https://photos.google.com from the different wifi hotspots that you may have connected to.
Cant unlock by miflash unlock cause it state that my device is not assosiated with the phone number (WTF !?) how to do hard reset in that situation when only androinone logo shows me or fastboot mode. Please help me guys I am in Rio for carnival and cant make normal photos withouyt phone
Just to add that it happened at 1 of march probably after some actualization or something.
norbertpoland said:
Cant unlock by miflash unlock cause it state that my device is not assosiated with the phone number (WTF !?) how to do hard reset in that situation when only androinone logo shows me or fastboot mode. Please help me guys I am in Rio for carnival and cant make normal photos withouyt phone
Click to expand...
Click to collapse
Had the same problem, in the end I decided to send it back for warranty repairs... and that fixed it of course, they probably had to open it to flash it in EDL mode, which I think you can do if you have the right screwdriver to open the phone.
https://www.youtube.com/watch?v=Uu7V0cBu41k
Thanks buty I m not technican to open and dig inside Is there any other possibility ?
norbertpoland said:
Thanks buty I m not technican to open and dig inside Is there any other possibility ?
Click to expand...
Click to collapse
If You are able to boot phone into bootloader (even with black screen, you can check with "fastboot devices" or looking for "Android Bootloader Interface" driver in Win DevManager), you can try this: https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718 to boot phone into EDL without opening case. More than that, may be its worth trying even simple "fastboot oem edl" command),
I ask for help, please. Thanks in advance!
By mistake I have NOT enabled developer options and USB debugging.
I downloaded with PC and copied in the phone xiaomi.eu_multi_MI8SE_V10.2.1.0.OEBCNFK_v10-8.1. This is to update the previous and excellent xiaomi.eu_multi_MI8SE_V10.0.1.0.OEBCNFH_v10-8.1.
I restarted from updates in TWRP recovery. The work of TWRP seemed all right until the restart. He restarted in Fastboot and left them. (I can turn it off by entering the folder TWRP_sirius_9.img and clicking on the file flash_twrp.bat) - If I try to turn it back on or insert the USB cable, the result is always just starting in fasboot. It is not blocked because in ADB fastboot responds. But the device is not seen in ADB.
The PC sees it as "Android bootloader interface". I would like to have detailed instructions to get out of this impasse. It does not matter if data or other data is deleted. I just need to recover my beloved Mi8 SE. Thanks again for the help you can give me.
The way to solve this issue has been answered in other threads in Q&A section . Just search
mysa50 said:
The way to solve this issue has been answered in other threads in Q&A section . Just search
Click to expand...
Click to collapse
Thank you. I'll be old, I'm not a technician and I do not know English, but I tried and did not find anything that could solve my problem. I hope in some kind person that maybe give me some precise indication. Maybe also to show me where, in the section, I can find the solution. Thanks in advance.
rrpfe said:
Thank you. I'll be old, I'm not a technician and I do not know English, but I tried and did not find anything that could solve my problem. I hope in some kind person that maybe give me some precise indication. Maybe also to show me where, in the section, I can find the solution. Thanks in advance.
Click to expand...
Click to collapse
Hello,
You are funny guy!
you posted already here:
https://xiaomi.eu/community/threads/mi8-se-with-unlocked-bootloader-turns-on-in-fastboot.48681/
You got answered. But worse than that answers were given two threads up....
https://xiaomi.eu/community/threads/mi-8-se-how-to-install-xioami-eu-9-1-3.48537/
what have you done since?
RESOLVED!!!
A sincere thanks to all for the valuable suggestions that, unfortunately, have not solved. But after weeks of trying and headaches, everything was successful reflecting with the MiFlashPro tool (first through fastboot I deleted the system, data, etc ....). Now it's like new. Thank you again!
rrpfe said:
A sincere thanks to all for the valuable suggestions that, unfortunately, have not solved. But after weeks of trying and headaches, everything was successful reflecting with the MiFlashPro tool (first through fastboot I deleted the system, data, etc ....). Now it's like new. Thank you again!
Click to expand...
Click to collapse
Hi, how are you?
I have the same problem could you help me in telling me how you did it?
Inglob_17 said:
Hi, how are you?
I have the same problem could you help me in telling me how you did it?
Click to expand...
Click to collapse
It depends on your situation!
Normaly you have flash new rom with 1102 twrp and BEFORE reboot install new 1227 twrp and then you reboot rom system.
I posted one of the numerous link for solution 2 posts AGO!!!
read.
I have the same problem
==SOLVED==
What I did:
1) Boot on TWRP
-fastboot flash recovery TWRP-1227.img
-fastboot boot TWRP-1227.img
-reboot recovery (power + vol up)
2) Sing TWRP (i guess this is optional?)
-Advanced -> sing boot
3) Do not reboot after install
-Go to setting and uncheck "Reboot after installation is complete"
4) Install same image used when you installed the system
-Click on install and select the zip the system image (don't use the "install image" button)
5) From main menu press Reboot->System
I tried installing crDroid (unlock bootloader, uploaded FW, recovery SHRP, then install ROM) and after reboot the phone would go back to recovery.
By mistake I "installed" SHRP from ZIP package (I thought I need to install latest recovery file to install ROM with android 12) and phone went into reboot loop, I can't do anything, any key combination doesn't help - I can't even turn it off.
help!
I opened the phone, disconnected the battery, but nothing happened - still bootloop
I'm planning to use SP Flash Tool
Immediately after connecting USB C, the phone boots into bootlop (after disconnecting and reconnecting the battery)
What happens when you flash the custom ROM?
Try to flash the stock firmware and miui
again. Download the latest miui recovery ROM for Lancelot and copy it to the sd card. If you can still boot into recovery you can connect the phone with a PC.
You can also try to reboot into bootloader if the reboot options work from sharp, if not connect the phone to a PC with adb and fastboot installed on it and type:
Code:
adb reboot bootloader
And now if you are in fastboot you can do anything, you can try to reflash the firmware, recovery etc.
I personally don't use SHRP, it was really buggy and not great. I use the twrp from this link: https://forum.xda-developers.com/t/recovery-twrp-unofficial-twrp-recovery-3-6-1_11-0.4421301/.
Thanks for reading and I hope u succeed,
Bye.
U can also try to flash it with MI flash tool.
Sergij-SApcPro said:
What happens when you flash the custom ROM?
Click to expand...
Click to collapse
Operation completed with status [ ]. It looks like there should be a * in the middle and then it would be a sign to me that the ROM is loaded.
Sergij-SApcPro said:
Try to flash the stock firmware and miui
again. Download the latest miui recovery ROM for Lancelot and copy it to the sd card. If you can still boot into recovery you can connect the phone with a PC.
Click to expand...
Click to collapse
At the time of writing, no key combination was working - I can't get into Fastboot or Recovery. I let the battery run out for that moment.
Sergij-SApcPro said:
You can also try to reboot into bootloader if the reboot options work from sharp, if not connect the phone to a PC with adb and fastboot installed on it and type:
Code:
adb reboot bootloader
And now if you are in fastboot you can do anything, you can try to reflash the firmware, recovery etc.
I personally don't use SHRP, it was really buggy and not great. I use the twrp from this link: https://forum.xda-developers.com/t/recovery-twrp-unofficial-twrp-recovery-3-6-1_11-0.4421301/.
Thanks for reading and I hope u succeed,
Bye.
Click to expand...
Click to collapse
Sergij-SApcPro said:
U can also try to flash it with MI flash tool.
Click to expand...
Click to collapse
That's what I'll do first, then move on to the solution below.
I opened the phone and disconnected the battery, but plugging in the USB cable immediately turns the phone on and bootloops again.
I'm using Linux and Windows, and one user hinted at hacking the USB driver so I believe it won't boot the phone, only then will I have communication? Other than that I don't know how to do it anyway.
For now, after the phone's battery runs out, I'll try with this solution
MTK Authorisation Bypass
Thanks to Dinolek ErdilS xyzz **All Steps Are Mandatory, Don't Skip Any Of Them** How to install: 1. Download the attached file: Alternate Download:https://anonfiles.com/l0yeSfD2u7/MTK-Bypass_zipAlternate Download:https://dl.uploadgram.me/6126628127c5fh?raw 2. Extract the file and open the...
telegra.ph
I've exhausted the battery, Mi Flash needs Fastboot, which I don't have.
I used
Deleted Account in Redmi Note 9 / Redmi 9 / 10X 4G Community
• Unbrick method for basically any device covered in this group. - Download SP Flash Tool from here. - Download the corresponding Engineering ROM for your device using #engrom - Download this zip and extract it. You Should find a DA file and an auth file in it. - Do the steps in this video...
t.me
I got to the point of connecting the phone to the computer and it connects (the procedure says to use the Power button, but I had to disconnect the battery because Bootloop was falling in), using the Vol- button - the phone keeps connecting and disconnecting....
For a while I tried to connect the phone via SP Flash under Linux - in administrator mode the message "memory protection violation" appears (I don't know how the message is in English).
Adding a udev exception was supposed to help - after lsusb the Mediatek device appeared, I added the exception, restarted - and the same thing happens (the program crashes).
I finally managed (with the help of a group on telegram https://t.me/HelioG85_Unified) by switching off the phone and carefully going through all the points (except the update at the very end) from this link
MTK Authorisation Bypass
Thanks to Dinolek ErdilS xyzz **All Steps Are Mandatory, Don't Skip Any Of Them** How to install: 1. Download the attached file: Alternate Download:https://anonfiles.com/l0yeSfD2u7/MTK-Bypass_zipAlternate Download:https://dl.uploadgram.me/6126628127c5fh?raw 2. Extract the file and open the...
telegra.ph
There is a little problem, because SP Flash must be from the link in this post (because it will not fit DA)
Deleted Account in Redmi Note 9 / Redmi 9 / 10X 4G Community
• Unbrick method for basically any device covered in this group. - Download SP Flash Tool from here. - Download the corresponding Engineering ROM for your device using #engrom - Download this zip and extract it. You Should find a DA file and an auth file in it. - Do the steps in this video...
t.me
Wow so many posts... Did you manage to fix the phone now? What do you mean by SP Flash will not fit the DA? Did you download the eng ROM for Lancelot? BTW I haven't done this kind of thing, but when I tried to flash my Lancelot with SP Flash tool it didn't work, because it was just waiting for device.
Sergij-SApcPro said:
Wow so many posts...
Click to expand...
Click to collapse
Often when reading threads I see "managed to fix, thanks!" but it doesn't say what and how, so that's why so many posts - so someone knows what was going on.
Sergij-SApcPro said:
Did you manage to fix the phone now?
Click to expand...
Click to collapse
Yes
Sergij-SApcPro said:
What do you mean by SP Flash will not fit the DA?
Click to expand...
Click to collapse
Other versions of SP Flash (newer) other than in the package with ENGROM didn't work with DA file with manual from links given above - it had to be the one from the package. SP Flash showed errors and crashed or informed about wrong file.
Sergij-SApcPro said:
Did you download the eng ROM for Lancelot?
Click to expand...
Click to collapse
Yes
Sergij-SApcPro said:
BTW I haven't done this kind of thing, but when I tried to flash my Lancelot with SP Flash tool it didn't work, because it was just waiting for device.
Click to expand...
Click to collapse
I think that if you go through the MTK Bypass process carefully, step by step, you may succeed, as I did.
Great to hear that you fixed the phone, congratulations!
TomekParuszewski said:
I think that if you go through the MTK Bypass process carefully, step by step, you may succeed, as I did.
Click to expand...
Click to collapse
Thanks for the info, but I don't need to flash it with SP Flash tool because that was earlier when I didn't try to install custom recovery. Now I have SHRP with CRDroid A12 and its Awesome.
Thanks for reading,
Bye
TomekParuszewski said:
Often when reading threads I see "managed to fix, thanks!" but it doesn't say what and how, so that's why so many posts - so someone knows what was going on.
Yes
Other versions of SP Flash (newer) other than in the package with ENGROM didn't work with DA file with manual from links given above - it had to be the one from the package. SP Flash showed errors and crashed or informed about wrong file.
Yes
I think that if you go through the MTK Bypass process carefully, step by step, you may succeed, as I did.
Click to expand...
Click to collapse
What version of SP Flash tools did you use? I'm running into this (status_ext_ram_exception error) kind of error while trying to flash the firmware provided in the Telegram channel.
SandShadow said:
What version of SP Flash tools did you use? I'm running into this (status_ext_ram_exception error) kind of error while trying to flash the firmware provided in the Telegram channel.
Click to expand...
Click to collapse
yes, im stuck at same error. any ideas? someone said we should let the phone completely discharge, im waiting on that, but just incase any other ideas...
voland34 said:
yes, im stuck at same error. any ideas? someone said we should let the phone completely discharge, im waiting on that, but just incase any other ideas...
Click to expand...
Click to collapse
The battery trick does'nt work for me. I can't remember exact version, sorry - but my way was going BACK with SP Flash tool version (from newest to working with file). When I found right version the rest was only going with procedure.
I did it twice: first time I was scared, second - with finding right version of SPFT, every time - like walk in the park. Looong walk all procedure was like 2-3 hours.
Second one try was after trying to load Andorid 13 (2x). Don't do it kids!
After all, my Revolut app stop working lately on my phone and Redmi is retired for now... (and also becoming unusable because slowing dramatically)
Thanks for your answer. it has worked with battery empty (though that might not have benn necessary); not on 1st atttempt v5.2020 but it did with version 5v.2216 in case it might help someone...it didnt flash miui fastboot rom 12.5 but it did flash engineering rom. and from there i will twrp and miui.
Thanks for your suggestion of trying different spflash versions.