Related
In my opinion, the screen on the Moto G4 Play is pretty decent for a budget device -- aside from the bluish/cool hue of the color reproduction. This is due to the white point of the display being set to 8653K, far from the ideal of 6500K (Velasco, 2016). It could possibly be fixed with a software-based recalibration from Moto/Lenovo (I'm not holding my breath), but there are a couple of things that we can do to make it a little better.
If you are using CyanogenMod you have the ability to adjust the colors under display settings to take some of the blue and green out. This is probably the easiest method.
If you are running a stock ROM the options are more limited, especially for anybody with a variant that does not support unlocking the bootloader and rooting. You might be out of luck. The following steps are for anybody running the stock ROM with root. If you have not rooted or modified your phone yet please read the warnings on the respective threads.
1. The Kernel
You will need a custom kernel that supports color correction, specifically what you want to look for is KCAL MDP5 color control. The squid2 kernel supports this feature, and there may be others as well. http://forum.xda-developers.com/g4-play/development/kernel-squid-kernel-moto-g4-play-t3496641 Remember to make a nandroid backup of your boot partition before installing any kernel or superuser software.
2. The Apps
As far as I know you need root access to use any of the software that allows you to do color correction. To install SuperSu it currently needs to be told to use systemless root on our phone. This can be forced by creating a hidden file called .supersu in /data with contents "SYSTEMLESS=true" (SuperSU Beta, 2016). You can do this in TWRP / Advanced / Terminal by entering the command "echo SYSTEMLESS=true>>/data/.supersu" There is also a flashable zip here in the forums that can do this. Just flash the SuperSU installer after this. There are many programs that can make the actual color corrections. An easy to use one is available from xda developer savoca here http://forum.xda-developers.com/android/software-hacking/dev-kcal-advanced-color-control-t3032080 Kernel Adiutor available on the Play Store can also be used https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor&hl=en
3. The Settings
In Settings / Display / Color Mode I set the color profile to Standard. In the Color Control app from savoca I left all settings at their default values except for setting green to 248 and blue to 237. This results in a more natural white point in my opinion. If anybody else finds settings that work well please share them in this thread.
References
Velasco, J. (2016). Moto G4 Play Review. Retrieved from http://www.androidauthority.com/moto-g4-play-review-716208/
Chainfire. (2016). SuperSU BETA. Retrieved from http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133/page408
Settings for CM
Color settings for CyanogenMod
If using LiveDisplay change the day color temperature to 5800k, otherwise in color correction set R, G, B to 100, 98, and 90.
I've been reading here and there, and I've come upon that thread where you can enable DCI_P3 calibration for your display on your OP3T, only on OOS thou.
Why isn't it supported on any ROM where the Display Model doesn't even turn up, and why haven't any ROM Devs implemented it?
Cheers!
because not all 3/3T support dci-p3 color scheme ..
Only S6E3FA5 panel ID that supporting dci-p3
twentyfourinc said:
because not all 3/3T support dci-p3 color scheme ..
Only S6E3FA5 panel ID that supporting dci-p3
Click to expand...
Click to collapse
It's a simple thing to have the ROM detect the ID of the Panel, and then have ROM to choose whether to show the option in Calibration Settings under Settings.
thes3usa said:
It's a simple thing to have the ROM detect the ID of the Panel, and then have ROM to choose whether to show the option in Calibration Settings under Settings.
Click to expand...
Click to collapse
If you think simple enough, so make yourself...
It's added through the kernel not the ROM, Ex and Blu spark both have it in OOS and custom kernels. Lineage also have it in their kernels too.
It works really well in LineageOS, I like the not so over saturated coloring in this mode, it's really nice to the eyes.
A Magisk module is available for it. https://forum.xda-developers.com/showpost.php?p=72842349&postcount=11
@thes3usa DCI_P3 color profile is available in official Resurrrection Remix rom for OP3T
You can with this one:
https://forum.xda-developers.com/on...ment/rom-zenity-resurrection-remix-n-t3551384
It's in Live Display settings. Don't change the kernel though, or you won't have the option anymore.
Installed the Aug.31 build of Lineage on my 3T yesterday, and it's an option there in Live Display settings too. There also seems a bug where the selected colour profile reverts to default every time you turn the screen off and on though :/
Apparantly the dci-p3 should be available using Vertex OS. But since i dont have the supported panel(wierd, since i bougth it in June 2017, so probably didnt get the newer display).. But it should be possible to change even on the old display ?
EDIT:
I found out that i have the correct display which ends on a5, so it should be able. But cannot find the necessary files in the sys/devices/virtual/graphics/fb0 folder....
About Us:
Revolution OS provides stock Miui 10 UI/UX experience with useful customizations. Based on Miui Gobal Dev, it provides a smoother experience. Useful customizations from various projects have been added and we always try to help our users.
#revos
For all Miui Lovers, we bring you a Miui 10 based custom Rom with better stability, long battery and superior customizability.
Smoother than EU Rom (according to users).
Credits:People behind this amazing ROM!
@BadWolfYe (Owner/Dev/Designer)
@Nulled_patronxx (Co-founder)
Disclaimer: While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device. We ask that you do your part to know your device and know how to recover from problems before you flash! If you have questions, ask your fellow users or ask us in Telegram Group.
** Revolution has no MIUI OS GSI or will have. We do not support ROM'S GSI covers or only give the devices officially supported by us on the web **
>Download<
Official Web:
https://os.revtechs.me
Telegram –
1. Group for Support of Revolution OS ROM MIUI (English Users) > https://t.me/revolutionmiuien
2. Downloads Channel > https://t.me/ROSdownloads
3. News Channel > https://t.me/revolutionnews
Instructions:
-Download the ROM of your choice
-Backup each and every partition from TWRP Recovery (optional)
-Make a full wipe (system, data, cache, dalvik)
-Make a data format (if Rom version is up/downgrading)
-Flash RevolutionOS Package
-Gapps are included in this ROM
-Wipe cache! -And at last Reboot!
[First boot will take few minutes! Have patience] Clean Flash is always recommended!
ROM Information:
ROM OS Version: 9.x Pie
ROM Firmware Required: None. Included in the Rom
Recovery: TWRP (pie supported)
Based On: Miui Global Dev 10
Version Information:
Status: Stable
Created 2019-05-01
Changelog (Full):
System
New - Base updated to 9.4.18
Optimize - Updated Google Security Patch (2019 # 3) to enhance system security
Optimize - Optimization stereo effects speaker
Optimize - Updated Youtube vanced (now replaces Youtube normal), Google Keyboard and WebView Google
Desk
Fix - Optimized experience to set a password when using a transparent wallpaper
Settings
Optimize - Optimized display grouping homepage
Optimize - Optimize the display of the display list accessibility
Optimize - Optimize the display of the group of home page
Fix - the problem of disabling eye protection mode and adjust the effect of eye protection screen is not dimmed.
Fix - Fix in several languages, the page shows confusion WiFi
New - Add Airtime screen, go to Settings -> Time Experience screen use
New - Added protection probe WIFI
Security Center
Fix - Fixed backup during the virus scan process will restart analysis.
Optimize - Optimize window style application wizard on red below the horizontal screen
Fix - Repair copy risk during the virus scan will restart the analysis
Camera
New - On 18: 6 (full screen the camera)
Optimize - Optimize the beauty and filtering interaction experience
Optimize - Optimize picture modes, portrait and short video for a unified beauty and filter input
Optimize - optimize positional order short video and slow motion
Lock Screen
New - loading screen for all devices
Fix - Problems that a double slash is generated when entering notifications
Fix - Solve the problem that the configuration page of the deleted fingerprint is abnormal
Fix - Solve the problem that the fingerprint authentication is abnormal under the screen after reboot and the screen is off
Fix - Fix the bar drop - down notifications from the lock screen, the load ball does not disappear
Fix - Fixed the problem that the notification bar on the lock screen is abnormal to unlock in the state screen
Optimize - Optimize GPS status bar display icon
Optimize - optimize the user interface and experience of renaming fingerprints.
Optimize - Optimize quick copy of the "Require password once every 72 hours , "
Fix - Fixed the ability to modify and set the password lock screen when using a transparent wallpaper
Fix - after it has been off setting item "Display off Finger fingerprint" fingerprint still it displayed in some cases.
Fix - to unlock and enter the horizontal screen, the display will flash for a moment.
Fix - Solve the problem that the interface of the third lock screen can not display the battery charge cable
Fix - Solve the problem that the password lock screen is displayed horizontally in some cases.
Fix - troubleshoot the lock screen images when the divided space is not configured
Fix - solves the problem that the interface lock screen is not updated on time
Fix - corrects bar drop notifications screen locking the load ball does not disappear
Fix - no minor notifications are solved, but it shows a problem with entry "no important notices"
Fix - solve the problem that the display style dynamic 24 - hour video does not show the image background
Fix - Fix the bottom of the lock screen by applying a third theme shows a messy problem
Optimize - optimize the loading speed of wallpaper to change the mobile phone
Optimize - optimize the experience of unlocking fingerprint: when you unlock your phone by double - clicking the notification message, you can use the fingerprint instead of password to unlock it .
Fix - Solve the problem that the animation is not smooth after the face unlock properly.
Fix - fix the configuration page screen information, problem bending the number of preview image Double clock
Fix - fix update time battery status bar is not appropriate
Clock
New - the ability to freely select a white or black background in the clock setting was added
Optimize - color background clock after this update is white
Optimize - Optimize pages of Life Morning Post related
Network Wizard
Fix - solve the problem that the operation saved as invalid after setting the quota in the package
Album
Optimize - Optimize removal album slow
Optimize - Optimize the slow loading pages album
Optimize - Optimize album thumbnail slow loading problem
FaceID
Fix - In some cases, the message FaceID not go away.
Topics
Optimize - Optimize the sources of the application without restarting
Calculator
New - normal to add a window function small calculator Added
Application Lock
Fix - Fixed some error models display the entry box password lock application
Game Tools
Optimize - Completely updated, support for block device lock, SIM cards, apps, among others.
Optimize - function desktop shortcut for acceleration of the game was added.
Optimize - optimize how acceleration mode of the game.
Fix - corrects the game to answer the speaker, the call duration displays the wrong question
Fix - correction network quick trip to accelerate the click input is not sensitive
Optimize - the new version of the game accelerates homepage and style of the interface is completely new.
Optimize - the toolbox of the game is completely updated, it is compatible with screen lock information, network card switch with one click and other functions
Other optimizations and adjustments
Fix - the problem of user interface the height of the button at the bottom of the interface of the start guide is not uniform
Fix - Solve the problem of the color and size of the operation buttons are inconsistent during startup
If you want any bug to be fixed please write here on xda in detail. Give Logcats, mention your device name, mention specific details about the problem. By helping us, you are helping yourself too.
->How to take Logcats?
https://goo.gl/UcTM9 and https://goo.gl/J4CSEP
Thanks for the post. I like it.
Included apps dont update with playstore after first reboot. Wipe all data from play store app but nothing change, "download waiting"...
domenicocortez said:
Included apps dont update with playstore after first reboot. Wipe all data from play store app but nothing change, "download waiting"...
Click to expand...
Click to collapse
You must do a clean installation, since the base is changed, from oreo to pie.
Already clean flash...
Just to install latest version of play store from apkmirror and reboot, everything is ok and updated.
domenicocortez said:
Included apps dont update with playstore after first reboot. Wipe all data from play store app but nothing change, "download waiting"...
Click to expand...
Click to collapse
Although I did not face any such problems. But, nonetheless. Please update whether it did work or not.
Thank you.
There's no problem with play store. Just need to enable gcam. Best miui pie at the moment
Is it possible to allow us to flash Gapps on our own?
I am currently in China and Google is blocked here...So, Gapps is basically junk app here...
Shiw Liang said:
Is it possible to allow us to flash Gapps on our own?
I am currently in China and Google is blocked here...So, Gapps is basically junk app here...
Click to expand...
Click to collapse
No cause it's global based
F2FS supported ?
Is Miui screen recorder included???? I want to record internal sound
Baravan Kurdish said:
Is Miui screen recorder included???? I want to record internal sound
Click to expand...
Click to collapse
Update: Miui screen recorder is available. But, due to Google's policy, it can't record internal sound.
You can always use other apps to do so.
damnsaif said:
You can always use other apps to do so.
Click to expand...
Click to collapse
Ok then it means it doesn't include Miui screen recorder, and No i can't i want to record internal sound and hear it while recording on other screen recorders i can't, i was able to record internal but i couldn't hear it while recording that's why i want miui screen recorder
lelidsn said:
F2FS supported ?
Click to expand...
Click to collapse
No
Baravan Kurdish said:
Ok then it means it doesn't include Miui screen recorder, and No i can't i want to record internal sound and hear it while recording on other screen recorders i can't, i was able to record internal but i couldn't hear it while recording that's why i want miui screen recorder
Click to expand...
Click to collapse
is this one?
camp70 said:
is this one?
Click to expand...
Click to collapse
Yeah that's the one but the name is little different, check the settings and see if you can recorder system sounds only and the other option should be record Mic
Baravan Kurdish said:
Yeah that's the one but the name is little different, check the settings and see if you can recorder system sounds only and the other option should be record Mic
Click to expand...
Click to collapse
It has
camp70 said:
It has
Click to expand...
Click to collapse
Interesting gonna try this rom today, btw how is the battery and performance (gaming)?
Battery not bad to be based on beta. I dont use games
camp70 said:
Battery not bad to be based on beta. I dont use games
Click to expand...
Click to collapse
Ok thanks, u test Antutu? If yes what was the score
Proton Kernel • ZenFone 6
by kdrag0n
I am not liable if your phone explodes, stops functioning, or turns into scrap metal. I am not obligated to publish and update this kernel. However, if you provide an accurate description of your issue accompanied with logs, it is likely that I will at least look into your issue. By flashing this kernel, you acknowledge the potential risks it brings.
Introduction
Proton Kernel strives to provide the perfect balance of performance and battery life in order to create the best possible experience for your phone. Features are welcome within reason.
Compatibility & Installation
The stock Pie ROM as well as all custom ROMs (Pie and 10, including GSIs) are supported. Wiping cache is unnecessary. Magisk is retained, so there is no need to reflash it afterwards. The kernel may be flashed from TWRP or your app of choice.
Features
List on GitHub Gist
The 72 Hz refresh rate is optional and is not recommended if you are concerned about your display's longevity. Some units may also show artifacts on the higher refresh rate. Staying on 60 Hz is thus recommended, but if you are willing to take the risk, you can add "72hz" or "72fps" anywhere in the ZIP file name to activate 72 Hz. The flasher output will update accordingly to confirm the change. I AM NOT RESPONSIBLE FOR ANY DAMAGE CAUSED BY THE HIGHER REFRESH RATE. YOU HAVE BEEN WARNED.
Downloads
Downloads and changelogs can be found here on GitHub. The topmost release is the latest. Alternatively, you can simply download the latest version here.
Make sure you download the flashable package, NOT source code! Source code is for developers and cannot be flashed.
Thanks to:
Asus for sending me a device to work on
Packet for sponsoring with a build server
Sultan Alsawaf for his support and dedication
Everyone whose work I've used in this kernel
Join the Telegram group for pre-release builds and support
Donate to support development. You know you want to.
XDA:DevDB Information
Proton Kernel, Kernel for the ASUS ZenFone 6 (2019)
Contributors
kdrag0n
Source Code: https://github.com/kdrag0n/proton_zf6
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v2.0
Stable Release Date: 2019-10-01
Created 2019-09-03
Last Updated 2019-10-02
Reserved
Bit of a noob here when it comes to custom kernels. The risks you mentioned at the beginning of your post, what do they entail? I like to improve the performance of my phone, but for as long as I'm flashing custom ROMs I haven't touched the kernel at all. Unless the developer of said ROM recommends using a certain kernel and guides me through it.
Avalon said:
Bit of a noob here when it comes to custom kernels. The risks you mentioned at the beginning of your post, what do they entail? I like to improve the performance of my phone, but for as long as I'm flashing custom ROMs I haven't touched the kernel at all. Unless the developer of said ROM recommends using a certain kernel and guides me through it.
Click to expand...
Click to collapse
The typical risks: warranty void, possible bricks, etc. ROMs come with the same risks too. Realistically you should never encounter any issues that can't be easily fixed, the disclaimer is just there so people can't hold me liable if something happens to go very wrong.
kdrag0n said:
The typical risks: warranty void, possible bricks, etc. ROMs come with the same risks too. Realistically you should never encounter any issues that can't be easily fixed, the disclaimer is just there so people can't hold me liable if something happens to go very wrong.
Click to expand...
Click to collapse
I see, thank you for the explanation!
Thanks for developing for this phone! Are artifacts caused by the 75Hz refresh rate problematic in the long-term with respect to the display's durability/performance? Or are they just visual glitches that are benign?
shadeMe said:
Thanks for developing for this phone! Are artifacts caused by the 75Hz refresh rate problematic in the long-term with respect to the display's durability/performance? Or are they just visual glitches that are benign?
Click to expand...
Click to collapse
There shouldn't be any long-term issues, but for the paranoid, there's always a 60 Hz option available if you don't want to take any risks whatsoever.
This is amazing! I'm curious, does the display panel only allow you to refresh it so far only to 75 Hz? Or could it be pushed more without negative side effects?
I am getting an error when I attempt to flash the kernel, with error code 1. No clue what could be causing the problem
Covalex said:
I am getting an error when I attempt to flash the kernel, with error code 1. No clue what could be causing the problem
Click to expand...
Click to collapse
Same error here...
Proton Kernel v1.1 has been released. Download
Changelog:
? ? ? ? • Added automatic boot-time display reset for 75 Hz (removes need to toggle it manually after boot)
? ? ? ? • Fixed installation when coming from other kernels
? ? ? ? • Re-enabled per-app CPU frequency time-in-state stats for more accurate battery stats
? ? ? ? • Enabled traditional CPU frequency usage stats (thanks to a CAF commit to make it work with fast frequency switching)
? ? ? ? • Re-calculated internal display interface timings for 75 Hz (should reduce artifacts on lower-quality units)
Click to expand...
Click to collapse
Donate to support development
Enjoy!
troy5890 said:
This is amazing! I'm curious, does the display panel only allow you to refresh it so far only to 75 Hz? Or could it be pushed more without negative side effects?
Click to expand...
Click to collapse
80 Hz causes significant visual glitches that render the device unusable. Values between 75 and 80 Hz aren't worth testing in my opinion since they're not standard refresh rates and won't bring any perceptible benefits.
Covalex said:
I am getting an error when I attempt to flash the kernel, with error code 1. No clue what could be causing the problem
Click to expand...
Click to collapse
anesthetic said:
Same error here...
Click to expand...
Click to collapse
There was an issue with v1.0's flasher which caused this error to appear when coming from another kernel. It's fixed in v1.1.
Can someone guide me how to install this kernal
Seems to be working nicely but I've noticed a slight detail of the kernel version missing in the settings and that the backlight always remains on extremely dimly after turning the smartphone off. You can notice it if you go into a pitch black room with the display off.
hows the Battery life affected?
kdrag0n said:
80 Hz causes significant visual glitches that render the device unusable. Values between 75 and 80 Hz aren't worth testing in my opinion since they're not standard refresh rates and won't bring any perceptible benefits.
Ah, so that's why 75 Hz is the sweet spot. Thanks for informing us on the matter, as this only makes me even more excited to purchase this device.
Click to expand...
Click to collapse
Also found that the screen often lags and artifacts while on max brightness especially while watching back recorded videos on the phone. Running the latest lineage and this kernel.
SuPerSaif said:
Can someone guide me how to install this kernal
Click to expand...
Click to collapse
Installation instructions and compatibility information are in the OP.
Cranky2002 said:
Seems to be working nicely but I've noticed a slight detail of the kernel version missing in the settings and that the backlight always remains on extremely dimly after turning the smartphone off. You can notice it if you go into a pitch black room with the display off.
Click to expand...
Click to collapse
Looks like these issues are specific to the stock ROM. I've just installed the stock ROM to test, so they should be fixed very soon in v1.2.
aadeshiscool said:
hows the Battery life affected?
Click to expand...
Click to collapse
Battery life is more or less identical to the stock kernel from my experience.
Cranky2002 said:
Also found that the screen often lags and artifacts while on max brightness especially while watching back recorded videos on the phone. Running the latest lineage and this kernel.
Click to expand...
Click to collapse
That means you need to use 60 Hz. The 60 Hz mode is currently broken, but v1.2 (coming very soon) will have it working.
Proton Kernel v1.2 has been released. Download
Changelog:
? ? ? ? • Fixed display sometimes not turning off, staying at a very low brightness, and inhibiting deep sleep
? ? ? ? • Fixed filename detection for 60 Hz mode
Click to expand...
Click to collapse
Donate to support development
Enjoy!
Good job
Just as the title says I'm just asking those of you who are rooted and a quick brief explanation of why? Even those not rooted I would also encourage to Express your reasonings.
Personally I'm not rooted right now because I don't have TWRP and Google pay is iffy at the moment but I would love to root for substratum, adaway, and Viper sound mods.
Thanks guys.
Google Pay works with a simple fix in Termux app - no issues with it unless you use EdXposed.
I'm rooted for modding, theming, ability to install custom kernel, Button Mapper capabilities, Swift Backup, ability to fix device ambient EQ, ability to mod Active Edge, ability to use Lawnchair with QuickStep recents. mod accent colors to cool neon colors, iYTPB YouTube mod.. Substratum (not using currently but will be soon), ability to hide navbar.. the list goes on.
I'm rooted because this is a Google device with open source code and active development so modding and customizing my device is easy, fun, and I am able to see the changes being made without the blind guesswork and hackery involved in trying to develop for so many half-baked source release devices.
rooted so I can use;
- AdAway
- ViPER4Android
- EdXposed
As previously mentioned, Gpay is working fine.
And you don't "need" TWRP to root the P4XL.
sharpz811 said:
Just as the title says I'm just asking those of you who are rooted and a quick brief explanation of why? Even those not rooted I would also encourage to Express your reasonings.
Personally I'm not rooted right now because I don't have TWRP and Google pay is iffy at the moment but I would love to root for substratum, adaway, and Viper sound mods.
Thanks guys.
Click to expand...
Click to collapse
wrongway213 said:
Google Pay works with a simple fix in Termux app - no issues with it unless you use EdXposed.
I'm rooted for modding, theming, ability to install custom kernel, Button Mapper capabilities, Swift Backup, ability to fix device ambient EQ, ability to mod Active Edge, ability to use Lawnchair with QuickStep recents. mod accent colors to cool neon colors, iYTPB YouTube mod.. Substratum (not using currently but will be soon), ability to hide navbar.. the list goes on.
I'm rooted because this is a Google device with open source code and active development so modding and customizing my device is easy, fun, and I am able to see the changes being made without the blind guesswork and hackery involved in trying to develop for so many half-baked source release devices.
Click to expand...
Click to collapse
Thanks for your input guys but I'm a little confused through googling I see a magisk module that supposedly does all the necessary scripting in the background and then like mentioned here I see manually editing via termux. So I'm just wondering what is the exact procedure or is there a thread I can't seem to find with the exact instructions?
sharpz811 said:
Thanks for your input guys but I'm a little confused through googling I see a magisk module that supposedly does all the necessary scripting in the background and then like mentioned here I see manually editing via termux. So I'm just wondering what is the exact procedure or is there a thread I can't seem to find with the exact instructions?
Click to expand...
Click to collapse
I recommend this Termux fix, believe spaceman860 from DU is the first I saw using this but could be wrong, copying this from Telegram
Gpay fix v2
1. Install Termux app and open the app
2. Type pkg install sqlite hit enter and let it install.
3. Type su hit enter
4. Copy and paste this then hit enter
am force-stop /data/data/com.google.android.apps.walletnfcrel && chmod 777 /data/data/com.google.android.gms/databases/dg.db && /data/data/com.termux/files/usr/bin/sqlite3 /data/data/com.google.android.gms/databases/dg.db "update main set c='0' where a like '%attest%';" && chmod 444 /data/data/com.google.android.gms/databases/dg.db
5. Reboot
I'm rooted mainly so I can install a custom kernel. I always end up rooting for one small reason or another.
Because i can
Adaway for now.
I root for,
AdAway
YouTube Vanced
Active Edge Mod
Custom Fonts
Themes (Swift Installer and Substratum)
Viper4Android
Centre Clock Mod
Build prop edits (just to change volume steps, really)
Screen recorder with internal audio recording
iOS Emojis
Some Tasker stuff that requires root
Swift Backup
SD Maid Pro
Main feature is custom kernel... It can realy provide a boost
@rickysidhu_ can you give me a link to the screen recording app please?
un9a7y said:
@rickysidhu_ can you give me a link to the screen recording app please?
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.orpheusdroid.screenrecorder
- AdAway
- ViPER4Android
- EX Kernel
Yes, rooted.
Because I use:
Custom Kernels (battery saving)
BlackenedMod (battery saving)
AdAway (no ads!)
YouTube Vanced (YouTube without ads and other cool features!)
Custom Themes (just a better colour palate for OEM colours in styles)
Viper4Android (awesome sound on speakers/earphones)
Centre Clock Mod (purely aesthetic)
TiB (backing up and restoring apps)
I haven't rooted since the first pixel. Haven't needed to. Adguard premium does what I need along with YouTube vanced.
I'll never bother messing with my phones again.
Sent from my Google Pixel 4 XL using XDA Labs
I'm rocking a P3xl, but I rooted for...
Advanced Charging Control module - allows me to control how the battery is charged - (ie lower the max charge to 80% and other things that should increase overall battery life)
Active Edge Mod (mostly standard settings, but can squeeze to take a picture when the camera is open instead of having to press the shutter button on the screen. This really helps when trying to hold the phone with one hand).
Viper4Android
AdAway
YouTube Vanced
ExperimentalX kernel - great kernel and it has high brightness mode (HBM) support too. (Like the Pixel 4 series, the 3a series has a max brightness that is actually lower than the screen is capable of. HBM overrides this and truly maxes the brightness. It really helps when using the phone outside in bright sunlight).
With the Pixel 4 series, I think being able to map the Soli gestures for other things might be very interesting too.
FINGERFACE!!!!!! How can Google release a flagship model with no FP sensor before getting all the banking/security apps to support the Face-unlock API???
They don't call it the bleeding edge for nothing and something had to come first; there would never be support without need and there is no need until someone creates it. Realistically Google has used their power over the ecosystem to require support and it's going to be ubiquitous in the near future. For now, some of us have to bleed a little bit...
krabman said:
They don't call it the bleeding edge for nothing and something had to come first; there would never be support without need and there is no need until someone creates it. Realistically Google has used their power over the ecosystem to require support and it's going to be ubiquitous in the near future. For now, some of us have to bleed a little bit...
Click to expand...
Click to collapse
No need to bleed, just root and install EdXposed and Fingerface.
No longer feel the need to root. System is working just fine and I'm using DNS66 from f-Droid with AdAway hosts. It's working absolutely fine without rooting.
Sent from my Google Pixel 4 XL using XDA Labs