Database Develop

[ROM][4.4.4]Mokee ROM for Yureka [Unofficial]

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research if
* you have any concerns about features included in this ROM before flashing it!
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
We build this ROM using Mokee android source and tomato aka YU Yureka's source.
We are not the developer of this ROM. We just build this ROM with few bug fixes.
This ROM does not have gapps (Google Play Strore & other google goodies). But you can download & install it from http://wiki.cyanogenmod.org/w/Google_Apps
Note: After install do not uncheck chinese keyboard & please install gapps which contains google keyboard & then update google keyboard using PlayStore.
Otherwise you will get GoogleKeyboard FC error
Prerequists: YU should be on stock rom.
Use the recovery.img linked here. Otherwise chances of installation error due to device name missmatch.
Please don't just leech the files and go away. You can easily say thanks just by pressing "Thanks" button.
ROM Download:
MK44.4-tomato-201503052344-UNOFFICIAL.zip - 231.67 MB
OLD:
ROM: MK44.4-tomato-201503040513-UNOFFICIAL.zip - 231.67 MB Bugs like FC on Display&Lights
Philz Recovery: philz_recovery.img - 8.54 MB
Recovery: recovery.img - 8.20 MB
gapps: gapps-kk-20140606-signed.zip
Installation:
First flash above recovery image file (CWM recovery). Do use this reovery image file or you'll get error.
Code:
sudo fastboot -i 0x1ebf flash recovery recovery.img
Now boot to this CWM recovery.
FactoryReset/ Clear Data. Clear Cache.
Install MK44.4-tomato-201503XXXXXX-UNOFFICIAL.zip (ROM file) from sdcard.
Reboot system & enjoy Mokee ROM.
If needed download & flash gapps also.
Tested following all are working...
WiFi, voice, Camera, Notification LED, SIM Setting from dialer.
BUG:
Settings->DisplayLights gives FC. Solved
XDA:DevDB Information
Mokee ROM for Yureka, ROM for the YU Yureka
Contributors
dumtara, sooorajjj
Source Code: https://github.com/YU-YUREKA/local_manifests/tree/kk_mkt
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.10.x
Based On: Mokee
Version Information
Status: Beta
Created 2015-03-04
Last Updated 2015-03-12

Reserved
Review:
PRRash said:
Cant get the back key to work both with onscreen and hardware. However long press to kill app works fine. Anyone else with this ?? i did a clean install.
Edit: Also the default google keyboard does not work on start. I'm on latest pa gapps, never had this issue before.
Edit2: This is weird, i reinstalled the rom and this time i did not select onscreen keys and did not select the default input. The back key works and a default keyboard(some chinese name in "Language & input" setting) comes up. If i keep this keyboard as default, everything works fine, but the moment i change the default to google keyboard, my back key stops working & keyboard does not come up.
Edit3: I read your previous post, updating the google keyboard does the trick. Rom is smooth and fast. Thank you man @dumtara
Click to expand...
Click to collapse
SWAP3093 said:
I Have TWRP recovery in my Yureka....this ROM can also flashed via TWRP recovery also...didn't faced any issue at all...I am on TWRP 2.8.5.0
Click to expand...
Click to collapse
SumiT1995 said:
raman_ said:
Does anyone facing media scanning issue? Downloaded images dont automatically refreshes in gallery.....
Click to expand...
Click to collapse
yes, same here...
Click to expand...
Click to collapse
suhas.holla said:
Awesome .. One of my favourite ROM. Its the most stable ROM that i have found.
Thanks for bringing this to YUREKA
Click to expand...
Click to collapse
aniketh12 said:
.....
and thanks for so many roms. till date i have found you CM11 to be very fluid smooth and stable
Click to expand...
Click to collapse
SumiT1995 said:
flashed the rom,, really nice and smooth, did not find any bugs.... thnx for this nice rom dev...
Click to expand...
Click to collapse

link added now.
This is a test RC build. You may get some FC issue.
Please report ERROR here , we will try to fix it.

Nice work mate

Trying your CM rom.
Will try mokee next.
Dev @dumtara man you are a blaze. CM,Carbon with updated versions n now mokee.
Take your time breathe some fresh air dev

RajGopi said:
Trying your CM rom.
Take your time breathe some fresh air dev
Click to expand...
Click to collapse
Badly needed this..... thanks for suggestion
Few days leave now..... Happy Holi. :highfive:

dumtara said:
Badly needed this..... thanks for suggestion
Few days leave now..... Happy Holi. :highfive:
Click to expand...
Click to collapse
Happy holi to YU too dev.

-Good News -
Display & Lights FC issue has been solved now.
Updated ROM will be uploaded soon. :victory:
-edit=
Link added MK44.4-tomato-201503052344-UNOFFICIAL.zip - 231.67 MB

Also list what features MoKee open source have in OP.
I googled but i am confused does it support themes like miui or not ??

pkprasanna said:
Also list what features MoKee open source have in OP.
I googled but i am confused does it support themes like miui or not ??
Click to expand...
Click to collapse
Check the screenshots

Awesome .. One of my favourite ROM. Its the most stable ROM that i have found.
Thanks for bringing this to YUREKA

Hey Dumatra,
Kudos for all the development you are doing for Yureka.
But one request. Can u please stop adding assert statement in the updater script. or atleast add another check along with Yureka and Tomato.
whenever i wanna flash your kernel or any rom i need to be on stock rom, which is not the case.
And i know its very simple to edit the updater script and remove the assert statement. But i dont have a laptop right now and no PC other than the office one. So i cant edit the updater file when i want. Its causing a small prob.
But i do understand the risk of some noobs flashing wrong file on wrong device. But just think abt what you can do, to address this. Another check with tomato or AO5510 along with Yureka would be fine. or if you are ok, you can remove the whole assert statement and mention clearly in your thread as "this is only for yureka and not for coolpad or any clones"
and thanks for so many roms. till date i have found you CM11 to be very fluid smooth and stable

^^^^
Use the recovery provided by me.
There are CWM and Phil recovery provided. Use any one of them. And you won't face this issue.

flashed the rom,, really nice and smooth, did not find any bugs.... thnx for this nice rom dev...

Nice Rom its smooth and fast but its not having keyboard and only hardware home key is working. Please provide the patch or update.
Thanks

raman_ said:
Nice Rom its smooth and fast but its not having keyboard and only hardware home key is working. Please provide the patch or update.
Thanks
Click to expand...
Click to collapse
you might have choosen the google keyboard and disabled the other keyboard.
flash latest gapps (link at OP) and update google keyboard from playstore.
keyboard & all 3 hardware key will work then.

Does anyone facing media scanning issue? Downloaded images dont automatically refreshes in gallery.....
Sent from my AO5510 using xda premium

raman_ said:
Does anyone facing media scanning issue? Downloaded images dont automatically refreshes in gallery.....
Sent from my AO5510 using xda premium
Click to expand...
Click to collapse
yes, same here...

Good News...TWRP works
I Have TWRP recovery in my Yureka....this ROM can also flashed via TWRP recovery also...didn't faced any issue at all...I am on TWRP 2.8.5.0

[ROM] Official LineageOS 14.1 for Falcon (WEEKLY)

Code:
#include <std_disclaimer.h>
/*
[COLOR="Red"]* Your warranty is now void.[/COLOR]
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
About
Lin·e·age
/ˈlinēij/
noun
lineal descent from an ancestor; ancestry or pedigree.
a sequence of species each of which is considered to have evolved from its predecessor.
some words of wisdom:
WIP
Latest features :
XDA:DevDB Information
LineageOS 14.1 for Falcon (WEEKLY), ROM for the Moto G
Contributors
matmutant, luca020400, LuK1337, Google, LineageOS Team, Motorola
Source Code: https://github.com/lineageos
ROM OS Version: 7.x Nougat
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2017-01-26
Last Updated 2017-02-01

Download & Install
LINKs:
All Downloads
Nightly Changelog
OpenGapps choose ARM>7.1>micro/nano/pico (micro might still be too big... unless you use the custom install options that allows you not to install everything from the package)
Either way, you might want to further customize your installation (both gapps and system apps), refer to this tutorial
REMEMBER:
ONLY use TWRP 3.0.2-1 or up
/!\ Before installing, read post #3. /!\
​HOW TO INSTALL
Requirements: Unlocked Bootloader, a Nougat compatible Custom Recovery and the Downloaded Zips.
NB: as with CM14.1, with a Lollipop compatible recovery like TWRP 3.0.2-0, you will get stuck to recovery, It is MANDATORY to update to 3.0.2-1.; the following error is still present : E:unknown command [log] but will not prevent install.
Place the rom and other like Gapps on the internal Storage or on a USB OTG
Reboot to recovery using the hotkey ( PowerOff+Vol- => With Vol- Go to Recovery => Select the recovery option with Vol+ )
Do Wipes (Data, Cache, Dalvik and System partitions) if you are in a different ROM.
Select the Zips
Swipe to install (if using TWRP)
Reboot and wait 2-3 min
HOW TO DIRTY UPDATE
Same as above, without the need of wiping of reflashing gapps.
HOW TO COME FROM CM13/14?
The Best practice way is to follow the clean install way.
BUT it is also possible to update from CM13/14 using an EXPERIMENTAL data migration build.
Here are the Official recommendations :
This build will allow you to ‘upgrade’ from CM to the signed LineageOS weekly
This build may wipe permissions (you’ll have to re-allow app permissions), but should retain all user data
This build will be watermarked with an ugly banner to ensure that you don’t permanently run this EXPERIMENTAL release, and upgrade to a normal weekly after.
The process for this installation will be as follows:
Install EXPERIMENTAL migration build on top of cm-13.0 or cm-14.1 build (don’t try to install LineageOS 13.0 on top of CM 14.1, that will not work).
Reboot
Install LineageOS weekly build
Reboot
Re-setup your application permissions
Given the EXPERIMENTAL nature of this process, we are going to remove this option in two months time.
Click to expand...
Click to collapse
As Always, DO A TWRP BACKUP before trashing your device!

Notes, Bugs, and miscellaneous.
Tips and notes:
When choosing a Gapps package ensure it can fit into /system when flashed.
Nano gapps package is recommended as it fits and provides everything in a base package you will need for gapps support. Then, you can install the other google apps from the store later on if needed.
Remember nightly builds are experimental: they can and will be broken from time to time. Always have a backup at hand.
To transfer files from/to PC when plugged in you will get the charging mode prompt status in the status bar, then click it to change from charging mode to transfer files.
Considering the quite low amount of Falcon users left over here, I'm not sure about making a full-sized FAQ;
For now, the following will take that purpose:
[SIZE=+1]Q1: Question?[/SIZE]answer​ [SIZE=+1]Q2: How to get Root?[/SIZE]
go to : https://download.lineageos.org/extras
and choose "su (arm)" download.​

It's been a long journey since I brought this device... Thank you so much Dev for supporting my 4 years old device... Downloading... LineageOS for falcon... Fingers crossed...

Long live falcon!

Great job!

Question, is there a list of what is working and not working on this rom as far as of hardware?
Thanks

Finally... Officially Supported.
thanks man.

Long live falcon and God bless the developers.
Sent from my Moto G using Tapatalk

theplagueisback said:
Question, is there a list of what is working and not working on this rom as far as of hardware?
Thanks
Click to expand...
Click to collapse
Basically, what worked on CM14.1 works on Lineage on this device, I didn't thoroughly tested it, but I didn't encounter much regressions after the migration (I performed the "Experimental" migration, to be in worse case scenario)

long live my (g)old device

ROM installed, so far so good, device performs as good as a brand new kick ass phone.
Keep up the good work!

Clean installed, seems to be good...

Someone tried if it works Xposed?

seba2907 said:
Someone tried if it works Xposed?
Click to expand...
Click to collapse
:facepalm:

seba2907 said:
Someone tried if it works Xposed?
Click to expand...
Click to collapse
Xposed is not yet available for nougat.

abeloman said:
:facepalm:
Click to expand...
Click to collapse
Sorry for not being at your senior level
BryanByteZ said:
Xposed is not yet available for nougat.
Click to expand...
Click to collapse
Thanks for your answer, I'm in cm13 and i thought it already worked for nougat

seba2907 said:
Sorry for not being at your senior level
Thanks for your answer, I'm in cm13 and i thought it already worked for nougat
Click to expand...
Click to collapse
I'm preying for that its the only thing that hold me on MM.

My 5X is dead. It's time to revive my g1

noice. falcon ftw!

delete thread please

The rom is done 80%, it boots, but I need someone to test it with his phone too to be 100% that everything is working.
EMUI VERSION
ABANDONED PROJECT
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
FEATURES OF THE ROM
-New boot UI(but I don't know if this will be in final version)
-Bloatware removed
-Proffesional camera app; light painting and that stuff added
-Google Now Launcher(because emui=ugly) and kernel adiutor added(but NO ROOT, because I know about the Snapchat problem) TIP: TO MAKE SNAPCHAT WORKING INSTALL SNAPCHAT, LOG IN, THEN REBOOT AND INSTALL ROOT
-Advanced Reboot
What is not working:
-Wifi(sees all networks but when I try to connect it fails and says: The connection to"network" has expired. The connection has failed.
-I have a problem with Huawei Swype Keyboard. At first boot when I try to type something the keyboard doesn't show. After skipping everything in first boot of the os you need to go to -Settings-Advanced Settings-Language and tiping methods-There you press on Default Keyboard, then select Google Keyboard or how it's named, I forgot.
-Bluetooth- same problem as wifi; maybe even worse, whe you press on Activate bluetooth, after 10 seconds it goes off again.
I have not tested everything because at the same time I am working and on The CyanogenMod 12.1 EmuiMix. This is the Modded Emui EmuiMix.
I do not not when I will release the CyanogenMod EmuiMix, I'm kinda mad that I need to fix the Wifi and Bluetooth, and on CM I need to fix A LOT
DOWNLOAD:
Here is the link: https://drive.google.com/open?id=0B-...3dUeHNjYVNxWUU . If it doesn't work, tell me.
INSTRUNCTIONS - READ VERY CAREFULLY!
1.Download zip from the link
2.Hold power+vol up+ vol down to get into TWRP
3.Click on "Wipe" and slide to wipe the system ---------Normal wipe doesn't wipe all data(music,photos...) just some cache what is part of the system
4.Click on install and choose the zip
5.(alert)--DO NOT INSTALL GAPPS AFTER INSTALLATION OF ROM!!! , JUST INSTALL IT AFTER FIRST BOOT SETUP, OTHERWISE THE ROM WILL BREAK!
6.Reboot your phone- ALERT- First boot might take a while, somewhere between 10-15 minutes, just wait, do not panic.
7.Set up your phone how you can; how I said in the problems of this rom is that the keyboard isn't showing= you cannot connect to wifi(but wifi doesn't even work), cannot connect with Google(but if wifi doesn't work I don't know if you can connect with mobile data; so just skip it)
8. After setup, go to -Settings -Advanced Settings -Language and tiping methods -There you press on Default Keyboard, then select Google Keyboard or how it's named, I forgot.
9.(optional). After setup, now you can install Gapps. Go to http://opengapps.org/ , and be sure to download ARM64-6.0- AND CHOOSE Micro, Mini or Full, just these three will work. But installing this package erases old gapps, including google keyboard. Be sure to have in your phone a keyboard .apk because you will have no keyboard.
Again, do not blame me for bricking your phone, losing data, etc SO PLEASE READ THE INSTRUCTIONS CAREFULLY!
If you can help me with fixing the remaining bugs, I would appreciate that A LOT.
I will let a screenshot of the ROM, too.
If you have any questions, please reply to this thread.
Code:
Changelog:
28.03.2017:
-Initial Build
P.S. - I used Omnirom 5.1 files for installing in TWRP, because stock HW roms are made in UPDATE.APP format, maybe I will do a custom one at a time
So don't panic if it says in TWRP "OMNI" and "Enjoy Omnirom!" because it is not Omnirom.
XDA:DevDB Information
[ROM] [UNOFFICIAL] EmuiMix for Kirin Huawei ALE-L21, ROM for the Huawei P8lite/P8 Lite
Contributors
hi6120sft ale-l21
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod 12.1 and EMUI
Version Information
Status: Abandoned
Beta Release Date: 2017-03-30
Created 2017-03-26
Last Updated 2017-03-30

Be careful, placeholder threads aren't accepted on development
Edit: But still, sound pretty interesting

Based on CyanogenMod 12.1? Or emui? Confused lol.. any bit of information on what you're working on? ?

D1stRU3T0R said:
CM12. 1? EMUIMIX? Something is wrong, at least develop on LineAgeOS 14.1, or vase rom with some improvements... Better ideea would be to only help others, like haky and XePealato to build, they have the 2 main roms
Click to expand...
Click to collapse
Yes, I like the name EMUIMIX for this rom.

Best wishes to you in this

Zizo17 said:
Best wishes to you in this
Click to expand...
Click to collapse
Thx, that means a lot

Good luck! But I've got a small question. Wouldn't it be better to all developers work together? Like we have like 4+ different roms so IMHO it would be better together right? It would make the progress faster... But I'm not a programmer or a professional so pls don't hate me. I'm just curious.
PS: I don't want rushed things etc and I respect you guys (doing stuff for our device)
Thanks

filiplongac said:
Good luck! But I've got a small question. Wouldn't it be better to all developers work together? Like we have like 4+ different roms so IMHO it would be better together right? It would make the progress faster... But I'm not a programmer or a professional so pls don't hate me. I'm just curious.
PS: I don't want rushed things etc and I respect you guys (doing stuff for our device)
Thanks
Click to expand...
Click to collapse
That ACTUALLY would be better, but not all developers want to make a team
These Kirin devices are a headache, not like the snapdragon phones when you can make a stable custom rom in a day.

NEWS:
News: I have found out and a old project of mine based on Emui, what I am going to post it too here
So there will be 2 versions of EmuiMix:
1. Modded Emui(Today I need to make some pathces, less bugs, maybe even release today a beta if I finish my work)
2.CyanogenMod 12.1 (Android 5.1.1, with many bugs; needs a lot of time to fix)

hi6120sft ale-l21 said:
News: I have found out and a old project of mine based on Emui, what I am going to post it too here
So there will be 2 versions of EmuiMix:
1. Modded Emui(Today I need to make some pathces, less bugs, maybe even release today a beta if I finish my work)
2.CyanogenMod 12.1 (Android 5.1.1, with many bugs; needs a lot of time to fix)
Click to expand...
Click to collapse
Why don't you use LineageOs 14.1 repo by XePeleato or AOSP by Haky 89 and help them with fixing bugs?

xdk78 said:
Why don't you use LineageOs 14.1 repo by XePeleato or AOSP by Haky 89 and help them with fixing bugs?
Click to expand...
Click to collapse
Because they're hard. Maybe in the future. I'm just a starter developer

hi6120sft ale-l21 said:
Thx, that means a lot
Click to expand...
Click to collapse
Hats off for your kindness relpy ?

Thread lacks a valid download link. Please PM me with the link, when there is a valid download available and I will reopen the thread. Until then this is a placeholder.
Should you wish, you may post an early Alpha version for the members to test and give feedback.
Thread reopened.

Here is the screenshot:

So simply said, it's a deodexed stock EMUI like one of the Sokobban's ROM or what is the main difference?
Nice work and Good luck m8 !

filiplongac said:
So simply said, it's a deodexed stock EMUI like one of the Sokobban's ROM or what is the main difference?
Nice work and Good luck m8 !
Click to expand...
Click to collapse
Yes, I modded stock Emui.

hi6120sft ale-l21 said:
Yes, I modded stock Emui.
Click to expand...
Click to collapse
And what build was used in this ROM? Or it doesn't matter? Because I think some newer builds have new improvements etc...

filiplongac said:
And what build was used in this ROM? Or it doesn't matter? Because I think some newer builds have new improvements etc...
Click to expand...
Click to collapse
What "build" are you talking about?
If you are talking about what emui, I am using stock EMUI 4.0
.4.1 was also a option for me, but 4.1 doesn't work on all carriers.

hi6120sft ale-l21 said:
Yes, I modded stock Emui.
Click to expand...
Click to collapse
hi6120sft ale-l21 said:
What "build" are you talking about?
If you are talking about what emui, I am using stock EMUI 4.0
.4.1 was also a option for me, but 4.1 doesn't work on all carriers.
Click to expand...
Click to collapse
I meant f.e. B589 etc. Or there isn't any?

filiplongac said:
I meant f.e. B589 etc. Or there isn't any?
Click to expand...
Click to collapse
Ah, I forgot, I got what you try to say. I will tell you tomorrow what build is.

[ROM][7.1.2] Unofficial LineageOS 14.1 [26.11.2017]

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
Introduction:
A friend of mine (Fusionalex) and me were very unsatisfied with the current state of custom ROM development for this - at least concerning the hardware - great device. The maintainer of the official LineageOS has done nothing for months. Fixes for basic issues and features (see our features below) haven't been implemented although the source has been available for years now. For us, switching to one of the numerous bloated Lineage forks (which at least fixed some issues, but brought other unnecessary problems) was no reasonable option. Apart from all the bloat, many of them don't get regular updates anymore, even though major security issues like KRACK or Blueborne have already been fixed in the official Lineage source. There are some great builds out there like CM 13.0 by MrColdbird or 14.1 by OrdenKrieger (from which we took most of the code for the major fixes, a big thank you goes out to you).
So which ROM did we choose? An up-to-date official LineageOS, but extremely bugged? Or a fixed, but incredibly bloated and mostly unstable custom ROM without the latest security patches? We chose to create our own Lineage experience, as close to the official as possible, but with most of the big issues fixed and up to date.
We will continue to update this ROM until LineageOS 15 by OrdenKrieger is stable enough to use as daily drivers.
Click to expand...
Click to collapse
Features:
U-Touch
Headset buttons and headset hook working, especially with Xiaomi headsets
Ambient Display
GLONASS
OTA updates
some customizations to update the user interface, because apparently Google refuses to push its new design in the AOSP source
We are investigating/working on the some more things, just follow our changelog below!
Click to expand...
Click to collapse
Screenshots:
The UI is close to official LineageOS, you can take a look at the changes in the screenshots section.
Click to expand...
Click to collapse
Installation instructions:
Files you need:
TWRP 3.0.0 by eagleeyetom
TWRP 3.2.1.-0 by ShubhamB
ZUI 2.5.358ST firmware
latest version of our ROM (always on top of the linked list)
(optional) OpenGApps ARM 7.1 (recommended version is Aroma)
You can switch from official LineageOS to our ROM by flashing this small zip, which removes the signature check and then our ROM. Do not flash GApps again, this is only possible on a freshly installed ROM! If you want to go back to official, you need to flash this file.
Steps to install:
unlock bootloader
flash TWRP 3.0.0 using fastboot (v3.0.0 is currently the only version with Aroma support, which we need later on)
if you get this error message, you can ignore it: E: unknown command [log] - this happens because the old TWRP version you need to use doesn't support certain logging commands used in updater scripts, this does not affect the integrity of your installation
flash ZUI 2.5.358ST (this flashes the latest available official firmware)
wipe system, cache, data and Dalvik cache
flash our ROM
(optional) flash OpenGApps, you can use Aroma installer (the interface is bugged, but usable and the phone doesn't crash thanks to the TWRP we are using)
flash updated TWRP 3.2.1-0 (has more features and is more up-to-date, Aroma isn't supported, but you don't need that anymore now)
Click to expand...
Click to collapse
Changelog:
see first post below
Click to expand...
Click to collapse
Downloads:
Download the latest version of our ROM here (always on top of the linked list).
Click to expand...
Click to collapse
Sources:
https://github.com/DaBozzz
Click to expand...
Click to collapse
Bug reports:
Please do not report non-functional fingerprint sensors. You need to flash the ZUI firmware before, as it includes the updated fingerprint sensor drivers. Take a look at the instructions above please.
Feel free to report any other bugs!
Click to expand...
Click to collapse
Thanks to:
LineageOS team, for maintaining our beloved OS
ashwin007, for maintaining our device (in the past?)
OrdenKrieger, for being the reason why this device is still alive
MrColdbird, for investigating all the big issues
Click to expand...
Click to collapse
If you want to support the most important developer for the Z 1, consider donating to OrdenKrieger, his PayPal donation mail address is [email protected].
XDA:DevDB Information
Unofficial LineageOS 14.1, ROM for the Lenovo Zuk Z1
Contributors
Da Bozz, Fusionalex
Source Code: https://github.com/DaBozzz
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: ZUI 2.5.358ST firmware
Based On: LineageOS
Version Information
Status: Beta
Current Beta Version: 20171126
Beta Release Date: 2017-11-26
Created 2017-11-22
Last Updated 2017-12-23

Announcements
Changelog:
All builds contain the latest LineageOS changes.
Code:
20171126: some UI changes, Ambient display
[LIST]
[*][changed] settings icon updated, to apply this change you have to delete the icon database of your launcher: navigate to [I]/data/data/[Launcher Bundle-ID/Package Name]/databases/[/I], delete [I]app_icons.db[/I] and restart your launcher
[*][changed] updater accent color updated to match recent changes
[*][new] Ambient Display
[*][new] Toast message icons
[/LIST]
20171123: some UI changes
[LIST]
[*][changed] blue accent color
[*][changed] documents icon updated, to apply this change you have to delete the icon database of your launcher: navigate to [I]/data/data/[Launcher Bundle-ID/Package Name]/databases/[/I] and delete [I]app_icons.db[/I] and restart your launcher
[/LIST]
20171122: initial release
[LIST]
[*][new] U-Touch
[*][fixed] headset buttons and headset hook working, especially with Xiaomi headsets
[*][new] GLONASS enabled
[*][changed] custom OTA updates
[*][changed] rounded icons
[*][new] apn: added support for spusu MVNO (Austria)
[/LIST]
Click to expand...
Click to collapse

Nice work guys.. keep it up.. hope to see a bug free ROM from you..
Little advice :
Try to make radio images inline with device tree so that users don't need to flash a big chunk os before flashing this zip just only for latest radio images ...

shubhambhise said:
Nice work guys.. keep it up.. hope to see a bug free ROM from you..
Little advice :
Try to make radio images inline with device tree so that users don't need to flash a big chunk os before flashing this zip just only for latest radio images ...
Click to expand...
Click to collapse
Yeah, you're right. I created a flashable ZIP containing only the firmware, now about 33 MBs in size.

Feels like device rose like a Phoenix from the ashes of hell... Thank you for the rom

Amazing , thanks
Sent from my Pixel XL using XDA Labs

Please bring Camera2 API
Hello @Da Bozz Sir, I highly appreciate your great work and I only have two requests.... Please please implement the Camera2 API in your future build...
I know that one has to make changes to the device tree but I don't know how to do it...
(...in the QCamera2 folder by adding HAL3, etc...)????
But please, please implement it, the chipset SD801 does supports it?
And please add Ambient Display Feature...
Please reply sir...

Vaibhav Puri said:
Hello @Da Bozz Sir, I highly appreciate your great work and I only have two requests.... Please please implement the Camera2 API in your future build...
I know that one has to make changes to the device tree but I don't know how to do it...
(...in the QCamera2 folder by adding HAL3, etc...)
But please, please implement it, the chipset SD801 does supports it
And please add Ambient Display Feature...
Please reply sir...
Click to expand...
Click to collapse
Its impossible mate... Try and understand... In your listing of msm8974 devices, does any device has HAL3 enabled ?
AFAIK the answer is no... Our chipset is too old to implement it

Vaibhav Puri said:
Hello @Da Bozz Sir, I highly appreciate your great work and I only have two requests.... Please please implement the Camera2 API in your future build...
I know that one has to make changes to the device tree but I don't know how to do it...
(...in the QCamera2 folder by adding HAL3, etc...)
But please, please implement it, the chipset SD801 does supports it
And please add Ambient Display Feature...
Please reply sir...
Click to expand...
Click to collapse
Hello,
we are still investigating the possibilities of using the Camera2 API on this phone, but please note that it's highly unlikely that we get things to work flawlessly.
Ambient Display shouldn't be a big problem.
We just have to investigate if it causes any problems.

Great work from you guys, looking forward to future builds!

Can you upload screenshots..??

himanshu fulmali said:
Can you upload screenshots..??
Click to expand...
Click to collapse
Why? It's just LineageOS but with rounded icons like you've seen them on pixel devices.

himanshu fulmali said:
Can you upload screenshots..??
Click to expand...
Click to collapse
As soon as the UI updates are included in the build we will upload screenshots, but it's really just the same like on LineageOS.

Fusionalex said:
Hello,
we are still investigating the possibilities of using the Camera2 API on this phone, but please note that it's highly unlikely that we get things to work flawlessly.
Ambient Display shouldn't be a big problem.
We just have to investigate if it causes any problems.
Click to expand...
Click to collapse
U can take help from @shubhambhise , in his AEX, ambient display works super fine.

Sharma_Ji said:
U can take help from @shubhambhise , in his AEX, ambient display works super fine.
Click to expand...
Click to collapse
Thanks, we will take a look at it! Some devs talked about a possible negative performance impact, which is why the feature hasn't been included yet.

Great job.

Can i use Magisk and Substartum.

Fusionalex said:
Hello,
we are still investigating the possibilities of using the Camera2 API on this phone, but please note that it's highly unlikely that we get things to work flawlessly.
Ambient Display shouldn't be a big problem.
We just have to investigate if it causes any problems.
Click to expand...
Click to collapse
Thanks for your reply sir,
And I'm very happy to have great developers like you, who proved to be the best, I've just downloaded the 24th November build, and it's great that finally lineage os has ambient display enabled....
All the credit goes to you (@Fusionalex), @Da Bozz & @OrdenKrieger...
Sir, I would still have the request to test Camera2 API on this phone
You people are our last hope, because editing the Device Tree is beyond my reach, as it requires great dedication, knowledge and ambition, that I don't possess...
Sir, besides Cam2, I have one last request for you, please add three finger screenshot gesture and toast icons to your upcoming builds...
Please sir...
Waiting for your reply...

hardikkchavda said:
Can i use Magisk and Substartum.
Click to expand...
Click to collapse
Hello! Yes, you can use Magisk of course!
I don't know about Substratum sorry, it isn't included in the rom.
---------- Post added at 06:16 PM ---------- Previous post was at 06:15 PM ----------
Vaibhav Puri said:
Thanks for your reply sir,
And I'm very happy to have great developers like you, who proved to be the best, I've just downloaded the 24th November build, and it's great that finally lineage os has ambient display enabled....
All the credit goes to you (@Fusionalex), @Da Bozz & @OrdenKrieger...
Sir, I would still have the request to test Camera2 API on this phone
You people are our last hope, because editing the Device Tree is beyond my reach, as it requires great dedication, knowledge and ambition, that I don't possess...
Sir, besides Cam2, I have one last request for you, please add three finger screenshot gesture and toast icons to your upcoming builds...
Please sir...
Waiting for your reply...
Click to expand...
Click to collapse
Thanks! I'm glad you like our work!
The ambient display build from 24th has been taken down for now, because the implementation is incomplete, it's missing some settings which we will add later today.
Camera2 API is still work in progress sorry!
About the other 2 things: please describe more precisely what you want and we will consider it

Thanks for your valuable reply sir,
I was requesting for a popular gesture nowadays called the 3 Finger Swipe Screenshot
In this one, a user has to swipe from the top to the bottom dragging 3 fingers on the screen, this works as a gesture and takes a screenshot, it is very popular in Xiaomi devices (MIUI) and on OnePlus devices....
And now, many custom ROMs like Resurrection Remix, PureNexus, etc. have this feature
Attached picture 1 & 2 show a demo...
-----------------------------------------------------------------------
Second of all is the app icon that will appear on the toast message...
CM12.1 & CM13 stable versions have this feature which works flawlessly, attached picture 3 & 4 demonstrate how...
But in the nougat ROMs, users are provided with a switch to either enable it or to disable it...
But this "switch" has proved to be buggy in every nougat ROM that I have used (picture 5)
To implement this, one has to add this code to Toast.java file in the framework:
(android_frameworks_base/core/java/android/widget/Toast.java)
Code:
ImageView appIcon = (ImageView) mView.findViewById(android.R.id.icon);
if (appIcon != null) {
ActivityManager am =
(ActivityManager) context.getSystemService(Context.ACTIVITY_SERVICE);
if (!am.isPackageInForeground(packageName)) {
PackageManager pm = context.getPackageManager();
Drawable icon = null;
try {
icon = pm.getApplicationIcon(packageName);
} catch (PackageManager.NameNotFoundException e) {
// nothing to do
}
appIcon.setImageDrawable(icon);
}
}
I ported out this code from RR OS source code, but please consider investigating as I'm not sure if this will work on lineage os...
Link- https://github.com/ResurrectionRemi...ob/nougat/core/java/android/widget/Toast.java
Link to Lineage 14.1 toast.java :
https://github.com/LineageOS/androi...b/cm-14.1/core/java/android/widget/Toast.java
Link to CM13 toast.java :
https://github.com/CyanogenMod/andr...3.0-ZNH5Y/core/java/android/widget/Toast.java
Please have a look at this, whenever you get time.....
I will patiently wait...

[EOL][ROM][9.0][LA.UM.7.3.r1] Reloaded-CAF For Xiaomi Redmi 4A [ROLEX][OFFICIAL]

Code:
/*
* Your warranty is now maybe void.
*
* We are not responsible for bricked devices, dead SD cards, thermonuclear
* war, or you getting fired because the alarm app failed. Please do some
* research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
About Project
Reloaded-CAF is a Custom ROM which is based on CAF. The main aim of this ROM is to bring stock AOSP experience as much as possible while maintaining performance, smoothness and good battery backup. I hope that you'll all love this project, and help us, shape it even more better. Meanwhile, all of our sources are publicly available on our Github. Hope you enjoy your stay and like our work on Reloaded-CAF. We did added some features to improve the overall experience.
What's CAF?
Code Aurora Forum (CAF) is a consortium of companies with projects serving the mobile wireless industry. Software projects it concerns itself with are e.g. Android for MSM, Femto Linux Project, LLVM, MSM WLAN and Linux-MSM. Code Aurora is basically AOSP + Qualcomm specific enhancements and optimization.
Features:
Boost Framework
Network Traffic Monitor
Battery Styles
Statusbar Clock Date Customization
System wide dark mode
Accent colors options
Auto Face unlock (Settings -> security -> lock screen preference)
QS row/column settings
Volume key music control
Advanced Reboot menu
In-call vibration options
Double tap to sleep from status bar and lockscreen
Ability to hide the clock
Ability to hide the navigation bar
Ability to invert the navbar
Ability to toggle screenshot shutter sound
Pin quick unlock
Battery and notification light settings
Double tap/long press to toggle torch
Added QS Tiles for power, screenshot, sync, headsup, caffeine
What's working :
Boots
RIL (Calls, SMS, Data)
Wi-Fi
Bluetooth
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
LED
GPS
Volte.
IR camera
Known issues:
Selinux Enforce
Instructions :
Download the latest build and GApps
Reboot to recovery and wipe system, data, cache, dalvik
Flash Rom zip
Flash the latest build and Gapps
Flash magisk, if you want root access (optional)
Reboot
Downloads :
Reloaded-CAF Latest Build [15-03-2018]: https://sourceforge.net/projects/mu.../Reloaded-CAF-9.0-20190315-rolex.zip/download
Gapps [arm64/9.0]: https://opengapps.org/
Telegram Groups:
Reloaded Telegram Group
FAQ
Why is the security patch older then the latest AOSP patch?
CAF focus on delivering the latest hardware patches and are usually about a month behind Google on security patches, on the other hand, Google is usually a month or more behind on them on caf patches (sometimes months). No point in complaining about it, if you want the latest security patch, go with an AOSP based rom (like LineageOS), if you want latest qualcomm optimizations for our hardware as well as fixes, go with caf, its as simple as that.
Kernel Source: https://github.com/muralivijay/android_kernel_xiaomi_msm8917.git
ROM-Source Code: https://github.com/Reloaded-CAF/
Special Thanks To
riteshsaxena For the pure CAF source.
XDA:DevDB Information
RELOADED-CAF, ROM for the Xiaomi Redmi 4a
Contributors
muralivijay, haran2003
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: Miui Global Stable
Based On: CAF
Version Information
Status: Alpha
Beta Release Date: 2019-03-15
Created 2019-03-15
Last Updated 2019-10-26

Good job man, thank you.
I already know that's Alpha version, i just wanna report the only one bug that i've founded, when you change clock position it appears twice only on home screen, thanks anyway for the hard job.

_conors_ said:
Good job man, thank you.
I already know that's Alpha version, i just wanna report the only one bug that i've founded, when you change clock position it appears twice only on home screen, thanks anyway for the hard job.
Click to expand...
Click to collapse
Weird issue. I don't get this type of bug . Here proof my above screenshot see.
Try this to fix this
1) change launcher
2) go settings- > time & data -> turn off toogle to clock showing
3) go settings -> system ui_tuner- > show clock turn off it
It will disable any two clocks showing on status bar.. Hope this guide will help

Nice bro trying it :good:

muralivijay said:
Weird issue. I don't get this type of bug . Here proof my above screenshot see.
Try this to fix this
1) change launcher
2) go settings- > time & data -> turn off toogle to clock showing
3) go settings -> system ui_tuner- > show clock turn off it
It will disable any two clocks showing on status bar.. Hope this guide will help
Click to expand...
Click to collapse
sorry dev ... but don't you want to develop AOSPA for this device? I see you have 1 AOSPA ROM file at https://sourceforge.net/.
this aospa is an amazing rom. so I beg you to develop it.
thank you and sorry if I'm not polite

AOSPA already maintained by arpon .so ask him

muralivijay said:
AOSPA already maintained by arpon .so ask him
Click to expand...
Click to collapse
really? if indeed there is maintenance, I can't wait for him to share it here. thank you for the news!

Red_Zmooth said:
really? if indeed there is maintenance, I can't wait for him to share it here. thank you for the news!
Click to expand...
Click to collapse
check other forums. Or our telegram channel. For AOSPA rom download links

muralivijay said:
check other forums. Or our telegram channel. For AOSPA rom download links
Click to expand...
Click to collapse
which forum? I don't use telegram

New Update pushed 19/03/2019
Changelog
* Fixed clock showing twice in status bar
* Added option switch LTE to 4G icon
* Added option to pocket lock
* device tree & vendor huge update with some major bug fixes . special thanks @Harangovindan for his contribution with me
WARNING: if you updating this rom with dirty /data. i recommend you to do make backup of your apps data then do clean install . because we updated new mounts for pie backword compatiblity support. so thats makes bootloop if did dirty update . so make sure do clean install this update
hey guys our device tree and vendor tree is now private. due kangers and someone buildbots earn money using our source. iam many times warned them don,t do this . but some retards stil doing that. and disrespect our work always . there is no any financial help or server etc from any maintainers who using my source code always . but only few users always help with me. once again i thank you guys . who always with me and understand my situation. so i will give updates who loves stil loves our base . but not frequently. only per month. if any critical bugs founded i will push update faster as possible. so don,t expect device tree and vendor changelogs . but we updating . so don,t worry about it. hope you understand this
Regards
-MURALIDHARAN

Red_Zmooth said:
which forum? I don't use telegram
Click to expand...
Click to collapse
https://t.me/redmi4aINT/911112

muralivijay said:
https://t.me/redmi4aINT/911112
Click to expand...
Click to collapse
Thank you very much:fingers-crossed:

muralivijay said:
New Update pushed 19/03/2019
Changelog
* Fixed clock showing twice in status bar
* Added option switch LTE to 4G icon
* Added option to pocket lock
* device tree & vendor huge update with some major bug fixes . special thanks @Harangovindan for his contribution with me
WARNING: if you updating this rom with dirty /data. i recommend you to do make backup of your apps data then do clean install . because we updated new mounts for pie backword compatiblity support. so thats makes bootloop if did dirty update . so make sure do clean install this update
hey guys our device tree and vendor tree is now private. due kangers and someone buildbots earn money using our source. iam many times warned them don,t do this . but some retards stil doing that. and disrespect our work always . there is no any financial help or server etc from any maintainers who using my source code always . but only few users always help with me. once again i thank you guys . who always with me and understand my situation. so i will give updates who loves stil loves our base . but not frequently. only per month. if any critical bugs founded i will push update faster as possible. so don,t expect device tree and vendor changelogs . but we updating . so don,t worry about it. hope you understand this
Regards
-MURALIDHARAN
Click to expand...
Click to collapse
Officially ?

DevilUsr said:
Officially ?
Click to expand...
Click to collapse
Its unofficial build. Official will be soon

muralivijay said:
Its unofficial build. Official will be soon
Click to expand...
Click to collapse
I can't flash use orange fox recovery
can you give me something recommended
Error verified treble in recovery unknown zip format

DevilUsr said:
I can't flash use orange fox recovery
can you give me something recommended
Error verified treble in recovery unknown zip format
Click to expand...
Click to collapse
Remove compatibility.zip inside of rom zip . Or use use official twrp

Good news now our rom support officially

muralivijay said:
Good news now our rom support officially
Click to expand...
Click to collapse
:highfive: :victory: very good news!
btw
I tried installing Gcam but always forced close. I tried several versions but same. Does this ROM support Gcam? if yes what version works? thank you
Update: GCAM workig,but need GAPPS installed

Dear, a consultation in the multimedia reproduction the videos suffer loss in their quality, as in many other roms? sorry for my English

muralivijay said:
hey guys our device tree and vendor tree is now private. due kangers and someone buildbots earn money using our source. iam many times warned them don,t do this . but some retards stil doing that. and disrespect our work always . there is no any financial help or server etc from any maintainers who using my source code always . but only few users always help with me. once again i thank you guys . who always with me and understand my situation. so i will give updates who loves stil loves our base . but not frequently. only per month. if any critical bugs founded i will push update faster as possible. so don,t expect device tree and vendor changelogs . but we updating . so don,t worry about it. hope you understand this
Regards
-MURALIDHARAN
Click to expand...
Click to collapse
I understand, these guys don't respect the developers, taking advantage of the work of others, especially to make money.
One thing is true, in the past I used your tree to compile roms, but I used it only for personal use, I never share anything through the things of others without permission.
I respect the developers and their work.
Keep it up with your great work