Database Develop

MIUI Global 7.2.4.0.0 uses A LOT of RAM. (?)

Hello. Couldn't find a post related to this. I'm not a lazy browser, been on XDA for many years through many phones. Just haven't had the need for a user account until now.
I see the 7.2.4.0.0 version is removed from MIUI websites and i can think of a few reasons already.
Does anyone else have this problem too? I have the 3GB version and normally start out with 1.7gb RAM after a boot. Gradually over the day (even after closing apps) it goes slowly down to 200mb and i have to do a reboot.
Or Does anyone have the 6.5.30 version and could tell if it uses up the RAM over time?
Sincerely
John

jhenrikb said:
Hello. Couldn't find a post related to this. I'm not a lazy browser, been on XDA for many years through many phones. Just haven't had the need for a user account until now.
I see the 7.2.4.0.0 version is removed from MIUI websites and i can think of a few reasons already.
Does anyone else have this problem too? I have the 3GB version and normally start out with 1.7gb RAM after a boot. Gradually over the day (even after closing apps) it goes slowly down to 200mb and i have to do a reboot.
Or Does anyone have the 6.5.30 version and could tell if it uses up the RAM over time?
Sincerely
John
Click to expand...
Click to collapse
You have a fake rom. 7.2.4.0.0 is not an official MIUI rom and newer was. 7.2.4.0 is an official rom.
You should flash the official rom.

proag said:
You have a fake rom. 7.2.4.0.0 is not an official MIUI rom and newer was. 7.2.4.0 is an official rom.
You should flash the official rom.
Click to expand...
Click to collapse
Thank you. I didn't notice the extra zero and didn't think it was unoffical.
Sincerely
John

jhenrikb said:
Hello. Couldn't find a post related to this. I'm not a lazy browser, been on XDA for many years through many phones. Just haven't had the need for a user account until now.
I see the 7.2.4.0.0 version is removed from MIUI websites and i can think of a few reasons already.
Does anyone else have this problem too? I have the 3GB version and normally start out with 1.7gb RAM after a boot. Gradually over the day (even after closing apps) it goes slowly down to 200mb and i have to do a reboot.
Or Does anyone have the 6.5.30 version and could tell if it uses up the RAM over time?
Sincerely
John
Click to expand...
Click to collapse
You are on an un-official modefied version.
The fake version is 7.2.4.0.0 <- your version.
The real official and supported by Xiaomi version is 7.2.4.0

Hi,
Hope I can get some help. I recently just picked up a unit and am on 7.2.4.0.0. Realised it was a fake rom but I seem to have trouble flashing the global rom or the china stable rom. Believe my bootloader is locked at this point and have applied through the unlock miui website but that will take at least 10 days or more to get the SMS.
Frustratingly, I have seen some solutions on the miui forum and there was one proposed solution, of which many were finding success, that includes booting to recovery mode and then hitting shift + [flash] when connected to the Chinese miPCsuite. My update only goes by to mid 50% levels and then its stuck on for several hours! Is this a USBC to USB port incompatibility issue (if it was it wouldn't have recognized the phone right?) or is my phone just beyond saving ? At this point, im not confident in using other solutions as they look highly technical and some have highlighted that their phone has bricked in doing so.
Appreciate any advice! thanks. PLEASE HELP!

androFRUST said:
Hi,
Hope I can get some help. I recently just picked up a unit and am on 7.2.4.0.0. Realised it was a fake rom but I seem to have trouble flashing the global rom or the china stable rom. Believe my bootloader is locked at this point and have applied through the unlock miui website but that will take at least 10 days or more to get the SMS.
Frustratingly, I have seen some solutions on the miui forum and there was one proposed solution, of which many were finding success, that includes booting to recovery mode and then hitting shift + [flash] when connected to the Chinese miPCsuite. My update only goes by to mid 50% levels and then its stuck on for several hours! Is this a USBC to USB port incompatibility issue (if it was it wouldn't have recognized the phone right?) or is my phone just beyond saving ? At this point, im not confident in using other solutions as they look highly technical and some have highlighted that their phone has bricked in doing so.
Appreciate any advice! thanks. PLEASE HELP!
Click to expand...
Click to collapse
if you already tried the simple steps as stated then there are no more simpl steps left.
Do an EDL flash and make sure you clear all, and be aware that most Mi flash stuff works best on Windows 64Bit.

TheUltrametricSpace said:
if you already tried the simple steps as stated then there are no more simpl steps left.
Do an EDL flash and make sure you clear all, and be aware that most Mi flash stuff works best on Windows 64Bit.
Click to expand...
Click to collapse
What he said, download the latest, both files can be obtained HERE
-MiFlash tool - step 1
-official fastboot rom - step 2
install the MiFlash tool
extract the downloaded rom (tgz) then extract the output file (tar) > make sure you copy the path of the directory where you see all the files like flash_all flash_all_lock etc..
reboot your phone into fastboot mode (you can access this by turning off your phone, hold vol - and power)
make sure you have adb on your pc
type this: the first line is optional to see if the phone is recognized.
Code:
fastboot devices
fastboot oem edl
edit: I should mention, do not panic, the screen of the device will turn black but will still remain on.
launch the MiFlash tool
Click on Refresh, you will see a device right now in the list called COM (some number) >>>> it will be ticked
Paste the copied directory path into the white... uhh search bar thingy . or just click Browse and select the appropriate path.
Click Flash
edit: once done, simply unplug your phone and restart it by pressing the power button.
That should be all

TheUltrametricSpace said:
if you already tried the simple steps as stated then there are no more simpl steps left.
Do an EDL flash and make sure you clear all, and be aware that most Mi flash stuff works best on Windows 64Bit.
Click to expand...
Click to collapse
Thanks for the reply! Before proceeding, I actually received the SMS to unlock the bootloader but im still at work so I cant go back and attempt the unlock. So just trying to manage my expectations here.
Is it safe to assume that all I need to do now is log in to the unlock tool by miui and unlock? because im still on 7.2.4.0.0 (the unofficial discontinued rom) and I have no way of flashing it to any other roms. My last attempt last night was again, stuck at 52% after a nights worth of wait! TT
---------- Post added at 03:01 AM ---------- Previous post was at 02:49 AM ----------
xtachix said:
What he said, download the latest, both files can be obtained HERE
-MiFlash tool - step 1
-official fastboot rom - step 2
install the MiFlash tool
extract the downloaded rom (tgz) then extract the output file (tar) > make sure you copy the path of the directory where you see all the files like flash_all flash_all_lock etc..
reboot your phone into fastboot mode (you can access this by turning off your phone, hold vol - and power)
make sure you have adb on your pc
type this: the first line is optional to see if the phone is recognized.
Code:
fastboot devices
fastboot oem edl
edit: I should mention, do not panic, the screen of the device will turn black but will still remain on.
launch the MiFlash tool
Click on Refresh, you will see a device right now in the list called COM (some number) >>>> it will be ticked
Paste the copied directory path into the white... uhh search bar thingy . or just click Browse and select the appropriate path.
Click Flash
edit: once done, simply unplug your phone and restart it by pressing the power button.
That should be all
Click to expand...
Click to collapse
Thanks for the help. I will attempt this as a last resort. I just received the SMS to unlock my bootloader. Hopefully its as simple as logging in and unlocking so I can get rid of this pesky 7.2.4.0.0 supposed "Global" rom.

i have successfully flashed to global rom!!! but now i have no audio coming from the speakers!!!! is it just my luck!!!??? and after reflashing again.. its completely dead.. its goes into the sign in to miui welcome page and just goes insane.. like to the point where i cant even select options and and random menu sounds keep coming up.. cant even turn off i had to reboot to fastboot.. is a goner? sighs..

7.2.4.0.0 to Resurrection Remix (CM13)
- unlock bootloader
- flash TWRP with fastboot
- install Resurrection Remix
- install GApps
- reboot, now it's say Google play stopped.
- go back to TWRP
- wipe data
- reboot and everything is working

Huawei Honor Note 8 root

I get asked a lot how I rooted my Huawei Honor Note 8 so I thought I'd do a basic how to from memory on how I did it. It's relatively easy to do.
You'll need your phone's bootloader unlocked.
The files from Huawei's forums http://club.huawei.com/thread-10828573-1-1.html or https://drive.google.com/file/d/0BwyaxIga7s0qc0ZKRGtsdndwV3M/view?usp=sharing
The app is in chinese but has some english on the buttons.
To unlock bootloader:
Got bootloader unlock code with the app on the playstore "DC Huawei Bootloader Codes" (took about 8 hours to get)
Enable USB debugging on the phone & connect it to the computer.
Unlock the bootloader with the program downloaded. Use the first button on the first tab labeled bootloader. Put in unlock code in the pop up box & click ok.
To root:
Enable USB debugging on the phone & connect it to the computer.
Flash the recovery_twrp.img file with the program downloaded. Use the 2nd button on the first tab labeled recovery.
To change twrp into english, click on the 3rd down 2nd row button & then click on the globe button. The globe is really hard to hit! Keep trying till you get it Then select English.
Install SuperSU with TWRP
Should now be rooted!

Question. Is there anything I should do like backup my bootloader or something before starting this process?

benmeroff said:
Unlocking your bootloader will wipe the device; factory reset for sure, and I believe it also erases your internal storage (don't quote me on that though, not sure for this phone), but your OS will remain whatever stock version you had installed until you flash something else.
Click to expand...
Click to collapse
I did not backup anything.

Ok thanks.. I appreciate it

I have a question, or making a root and unlock the bootloader is associated with a full reset your data and settings that can be done root without losing data?

Nope
Sent from my EDI-AL10 using Tapatalk

Hi guys
I unlocked my note 8 successfully . In startup screen show your devives is unlocked and can not be trusted every time i restar the phone is it normal?
Second thing i flashed twrp by clicking on recovery button then after restarted i clicked on 3rd button of second row to change to english but it didnt say click on english
How to enter twrp recovey i tried pressing power button and volume up nothing happened
Plz help

Yuppers.. not trusted cuz ya unlocked it.
Should be volume up & power. You can also do it with the app. The 2nd tab... recovery. Will boot it into recovery too.
You have to click the globe button on the far right to get to the language. It's a ***** to hit! BTW... TWRP has reverted back to chinese a few time now for some reason on mine. It's kind of annoying considering how hard it is to hit that one button.

Questions about the root process
1) why do you need the unlock code?
2) Where can I find SuperSU for honor note 8? Can someone please provide a link?
3) Has anyone succeeded rooting?
Thanks in advance for the answers.

Please Help!
Everything was find, I unlocked the bootloader, installed TWRP, when I flashed SuperSU it bootloops!
Can someone please help.....

I'm not sure why it would be boot looping. I'd flash it again. Might even try a factory reset before flashing too. You're the first I've heard of with that problem. Make sure you're on version 22.
Sent from my EDI-AL10 using Tapatalk

problem solved
riffy504 said:
I'm not sure why it would be boot looping. I'd flash it again. Might even try a factory reset before flashing too. You're the first I've heard of with that problem. Make sure you're on version 22.
Sent from my EDI-AL10 using Tapatalk
Click to expand...
Click to collapse
The problem solved. I downloaded the latest version of SuperSU (2.78) , flashed it again with TWRP and everything loaded find.
I have a rooted device too.
Thanks for your answers!:good::fingers-crossed:

Glad to hear it worked out!

i downloaded "DC Huawei Bootloader Codes" then i entered my Note 8 IMEI and waited for 8 hrs and got an email telling me it is failed and i tries the other IMEI "since it's dual sim card phone" but no luck, same message.
Please help

The Huawei ID used to apply for the unlock code has not been used on the device for more than 14 days. Huawei site error
DC Huawei Bootloader Codes not working
please help

Hi,
I read of the possibility of the root of honor note 8 through oneclickroot, kingroot, etc.
It must first be unlocked bootloader or the software will to unlock?
For unlocking the bootloader you must use to force pay program dc-unlocker?
Thank you

DC Huawei Bootloader Code get but not unlock

Bootloader unlock codes
Hello guys... I have two Honor Note 8 phones and i wanna unlock them..
Official method - how to get Bootloader unlock codes does not work, so i downloaded dc-unlocker APP on google play..
Added there EMEIs, paid and was waiting almost 20 hours to get mails - operation failed..
I really dont know about any other way how to get these codes..
Can anyone help me please?
Thanks!

2Duky said:
Hello guys... I have two Honor Note 8 phones and i wanna unlock them..
Official method - how to get Bootloader unlock codes does not work, so i downloaded dc-unlocker APP on google play..
Added there EMEIs, paid and was waiting almost 20 hours to get mails - operation failed..
I really dont know about any other way how to get these codes..
Can anyone help me please?
Thanks!
Click to expand...
Click to collapse
in the app, there is another way to get it. choose not by imei.
write the developer of the app you did not get the code and you want a refund, and pay for the second method. this is how i did it.

arielisrl said:
in the app, there is another way to get it. choose not by imei.
write the developer of the app you did not get the code and you want a refund, and pay for the second method. this is how i did it.
Click to expand...
Click to collapse
Great! Many thanks for your quick reply! I contacted dc-unlocker support and thats what they replied..
Hello, this codes is from factory DB. Sorry, but there not all phones present in this db.
This happens frequently if phone has MEID .
But you can read code by cable, we support almost all huawei.
If reading by cable not acceptable we can do refund.
Im waiting for their next answers at my qustions, what exactly have i do..
I have to download their soft probably and make everything there..
I had no time to check their forum yet, im sure there will be instructions..
EDIT:
Oki so i used DC-unlocker software, received these codes and unlocked Bootloader successfully!
I have rooted both phones already!
I had an issues with ADB drivers on Win10 and on Win7 as well, could not find my devices in devices manager but i have solved it!
TWRP 3.02 with preinstalled SuperSU works fine on B027.. In one of my phones i had B029 so i had to downgrade to B027..
On B029 doesnt work flash command in cmd.. Stuck on "waiting for device"..

P9 Lite 2017 BootLoop

After installing twrp recovery i decided to install SU too. After that my phone is stuck in bootloop, before SU installation it worked just fine (with just the twrp) ;[
So here's my phone info (all i could get):
Model: PRA-LX1 (other ppl place here some diffrent numbers but i dont know where to find them since i cant even start my phone)
FCC ID: QIPRA-LX1
Well if someone could find a stock frimewere (or pre-rooted custom rom that would work on this phone) and give a link to it i would be greatfull couse i searched a lot and i'm still with nothing.
Now im left with empty brick with no OS at all...
Help! ;[

Maybe you should try this, it may find the proper firmware for your device.

Firicel69 said:
Maybe you should try this, it may find the proper firmware for your device.
Click to expand...
Click to collapse
The problem is there are a ton of diffrent versions of this PRA-LX1 and i dont know which one to chose...

Wilchu said:
The problem is there are a ton of diffrent versions of this PRA-LX1 and i dont know which one to chose...
Click to expand...
Click to collapse
Wrong thread mate, open this in P9Lite not in P8Lite

If this is P8 Lite 2017, we have seperate subforum for it :highfive:

D1stRU3T0R said:
Wrong thread mate, open this in P9Lite not in P8Lite
Click to expand...
Click to collapse
... But this is P9 Lite "2017" and what i heard is that this model comes with name of P8 Lite 2017 and if im not wrong there is no P9 Lite "2017" thread just P9 Lite which is completly diffrent device!

Let's do this in a diffrent way...
If there is a person who owns the same phone and the same model PRA-LX1 which is the only thing written on the box,
then i ask you to do a twrp system backup and maybe give the file to me.

Wilchu said:
If there is a person who owns the same phone and the same model PRA-LX1 which is the only thing written on the box,
then i ask you to do a twrp system backup and maybe give the file to me.
Click to expand...
Click to collapse
https://forum.xda-developers.com/huawei-p9lite/development/rom-custom-rokangtex-rom-t3624816
I hope it's working.

D1stRU3T0R said:
https://forum.xda-developers.com/huawei-p9lite/development/rom-custom-rokangtex-rom-t3624816
I hope it's working.
Click to expand...
Click to collapse
Thanks! I'll test it out but i have another question is there a way to install rom through pc maybe couse twrp is acting weird and i dont trust it so much...
To be more precise i get updater error: 7 every time when i try to flash the rom
And after that phone booted but i got encryption error, and cant do much

Wilchu said:
Thanks! I'll test it out but i have another question is there a way to install rom through pc maybe couse twrp is acting weird and i dont trust it so much...
To be more precise i get updater error: 7 every time when i try to flash the rom
(but i will still try tho)
Click to expand...
Click to collapse
Yeah, with flash. Search universal flashboot anf than flash everything in order (these are not the orders, just an ex) flashboot boot boot.img flashboot recovery recovery.img etc(extracted from the zip file, maybr with huawei extractor)
But try to update you're TWRP, either to personas one or OpenKirin's TWRP, you should not have any problem on TWRP 3.1.1-0

Quick update nothing new, nothing works just gonna go to huwaei service room and hope that they can fix this... :[

Wilchu said:
Quick update nothing new, nothing works just gonna go to huwaei service room and hope that they can fix this... :[
Click to expand...
Click to collapse
Did you go to the P8 Lite 2017 thread? I think that device has the same model number

Wilchu said:
Quick update nothing new, nothing works just gonna go to huwaei service room and hope that they can fix this... :[
Click to expand...
Click to collapse
First.. i supose you have TWRP ...
So, if im not wrong, your phone use 3 files to install the firmware ( like P8 Lite 2017 )...
Must be like this:
Download the 3 zip files (update.zip, cust and public data) of the firmware you want to flash and copy them to your phone’s memory.
Unplug the USB cable and power off your device.
Now hold Vol up + Power keys for a few seconds to boot into TWRP mode.
In TWRP, go to Install and flash the update.zip package.
After that, install the remaining two update files (cust and then the public data package).
Wipe the dalvik cache( or do a factory reset ) and then reboot normally into the new system.
Now the ROM... i don´t know where you can find it, sorry ...
.

Mediapad M3 Lite 8 - Bootloader Unlock Guide

Brand new here, looking to unlock, root and then flash a standard Android build or custom DeGoogled ROM for my new device. I was looking to find a way to unlock the bootloader to start and found that Huawei have stopped giving out unlock codes and that the info around unlocking wasn't great so I made a note of all my steps as below.
Please let me know if this works for you and if you have any issues, please also read and follow the guidelines carefully as there are lots of things like using all the applications as an administator and changing directories that are important.
I am also looking for a way to install TWRP or another recovery thing on this device so I don't brick it, as I want to root the tablet and muck around with it. Has anyone got any experience of doing this successfully and does anyone have links to methods to create a cloned backup of the standard OS?
This was done on a brand new Mediapad M3 Lite 8 (the Wifi version, not LTE) with Android 7.0, EMUI 5.1, CPN-W09, build CPN-W09C100B251 - BUT will probably work on the LTE version, the non-lite version and the 7 and 10 inch models.
IMPORTANT: This costs money and is done through the DC Unlocker tool, it costs 4 credits (4 euros/dollars) for the Mediapad M3 Lite 8 (Wifi, not LTE) as Huawei now do not offer the bootloader code AT ALL . I have copied/streamlined the steps below that were found as guides originally at the dc unlocker website, check their site guides to find originals.
Step 1 - Developer Options enable
Go to settings, about tablet, tap build number 7 times to unlock developer options
Go to developer options, enable OEM unlock, enable USB debugging
Step 2 - Enable manufacture mode
If your phone has a dialpad, enter dial pad code *#*#2846579#*#*
IF your phone doesn't have a dialpad, go to calculator and enter ()()2846579()()=
This willl take you to a developer menu, select "Project Menu", "Background settings", "USB ports settings", "Manufacture mode".
Step 3 - Install drivers
Connect your Android device to your PC with a usb cable and either install Hisuite from the connected drive that will attach, or download it from the Huawei website by searching for Huawei Hisuite and going to their official website.
To check this has worked, go to Device Manager on your PC and look for Modems - there should be an entry called Android Adapter Modem - if this is not present try disconnecting/reconnecting your device and restarting Hisuite.
Step 4 - Read bootloader code
Download the latest DC Unlocker tool from dc-unlocker dot com and extract it, then AS AN ADMINISTRATOR (right click and Run as Administrator) run the client.exe (was called dc-unlockerclient2.exe)
Click Select Manufacturer dropdown and change to Huawei Phones, not Modems, press the magnifier/search icon at bottom left and your phone info should be found. This should also
Step 5 - Buy credits from the dc unlocker site as a new user, try 4 credits first and then login with these new user details in the dc unlocker application on your PC, this will show your credits and the phone connected as well as the cost. Click the Unlocking icon on the top right and click Read botloader code to get your code. Make a note of this/copy it somewhere.
Step 6 - Go back to the folder that dc unlocker is in
Go into the unzipped folder and then copy the location of this folder by clicking on the address bar in File Explorer and copying this location, you'll have something similar to
C:\Users\ExampleUser\Downloads\dc-unlocker2client_1.00.1403
Step 7 - Turn off your phone and turn it back on holding the Vol down and Power buttons to enter fastboot mode, connect your device to your PC
Step 8 - Open cmd by searching for cmd in windows, right click cmd and open it as administrator, you'll get the black and white windows terminal
In the terminal type "cd C:\Users\ExampleUser\Downloads\dc-unlocker2client_1.00.1403" (or the path for the latest version of the dc unlocker you have downloaded) without the quotation marks and with YOUR directory path as described above. The command cd just changes directory to the one you give. Your terminal should now show the above directory as the path in which it now sends commands, i.e the > mark is now displayed after the directory path we copied
Step 9 - Type "adb devices" without quotation marks to start the adb daemon
Step 10 - Type "fastboot devices" without quotation marks and you should see a device number with the word fastboot next to it.
Step 11 - Now type "fastboot oem unlock" without the quotation marks, followed by a space and then your bootloader unlock code i.e
fastboot oem unlock XYZ123456789
Step 12 - Your device should show a screen asking you to accept the unlock, then onto another screen where you should press the power key to continue onto booting your factory reset unlocked device.
Step 13 - You might have to disconnect the USB cable and reboot your device now, and you'll set up the device from scratch again - but now the bootloader unlocked, allowing you to load stuff like TWRP if you can find the right version - which I can't right now! :good:

I have also now been able to install TWRP by using the TWRP image specifically for BAH-W09 found on page 17 of the "TWRP (greatslon mod)" in the link provided by pitapart
thread. I can't post links yet which is why I'm typing to source....
I have been trying to flash SuperSU using the latest 2.82 zip but keep getting the error "Extracting Ramdisk - Failure, aborting", which is the same error I'm getting when trying to root using SRKtool, both the 2.1 universal version and the 2.0 Huawei version, using option 1 for Mate P8 or option 6 for systemless.
I've downloaded a system root version of SuperSU (google "supersu system mode", first XDA thread) and flashed using TWRP, it says it has installed but the SuperSU app doesn't show root, and typing "su" in TWRP console doesn't show I can do commands in superuser mode. Can anyone help?

I recently have been purchased the LTE version of this device. Although I cannot try this out currently, I probably will in the future so please keep us updated about your experiments for reference!

avkjbl5bak said:
I have also now been able to install TWRP by using the TWRP image specifically for BAH-W09 found on page 17 of the "TWRP (greatslon mod)" in the link provided by pitapart
thread. I can't post links yet which is why I'm typing to source....
I have been trying to flash SuperSU using the latest 2.82 zip but keep getting the error "Extracting Ramdisk - Failure, aborting", which is the same error I'm getting when trying to root using SRKtool, both the 2.1 universal version and the 2.0 Huawei version, using option 1 for Mate P8 or option 6 for systemless.
I've downloaded a system root version of SuperSU (google "supersu system mode", first XDA thread) and flashed using TWRP, it says it has installed but the SuperSU app doesn't show root, and typing "su" in TWRP console doesn't show I can do commands in superuser mode. Can anyone help?
Click to expand...
Click to collapse
Hi,
Were you ever able to get your Mediapad M3 Lite 8 rooted? I really like this tablet but, need the 5 Ghz wifi band which requires root from everything I have read.
Thanks

howgies said:
Hi,
Were you ever able to get your Mediapad M3 Lite 8 rooted? I really like this tablet but, need the 5 Ghz wifi band which requires root from everything I have read.
Thanks
Click to expand...
Click to collapse
I have my Mediapad M3 Lite rooted by magisk.
I followed the unlock guide and unlocked the bootloader.
I couldn't find my exact firmware I downloaded the most recent one I could find.
I extracted the boot.img with Huawei Update extractor and copied it to my phone.
I download and installed latest magisk app.
I opened the magic app-> install -> install -> patch the boot image file which I then flashed through fastboot.
I then opened magisk -> install -> Direct install.
Everything works but like me you take a risk in not using the exact boot.img.
I tried and installed TWRP which worked but the volume keys would let me run the script I was trying to rebrand the phone. In the end it isn't necessary to root the phone.

sd26 said:
I followed the unlock guide and unlocked the bootloader.
I couldn't find my exact firmware I downloaded the most recent one I could find.
I extracted the boot.img with Huawei Update extractor and copied it to my phone.
Click to expand...
Click to collapse
Very bad idea and advice:
- people often uses wrong firmware or wrong version;
- a boot from a different version can be incompatible, you can be sure only too late!
The right thing is to boot to TWRP then in the console, using "dd" command do a copy of original boot!

nicolap8 said:
Very bad idea and advice:
- people often uses wrong firmware or wrong version;
- a boot from a different version can be incompatible, you can be sure only too late!
The right thing is to boot to TWRP then in the console, using "dd" command do a copy of original boot!
Click to expand...
Click to collapse
Very poor reply, you did not read my post properly, just jumped in to demonstrate your superciliousness. No advice was given and you missed the word risk. More productive use of replying would have been to include the actual command required anyway which is:
dd if=/dev/block/boot-device/by-name/boot of=boot.img
Helping wasn't the point your trying to make.

sd26 said:
Very poor reply, you did not read my post properly, just jumped in to demonstrate your superciliousness. No advice was given and you missed the word risk. More productive use of replying would have been to include the actual command required anyway which is:
dd if=/dev/block/boot-device/by-name/boot of=boot.img
Helping wasn't the point your trying to make.
Click to expand...
Click to collapse
if my reply is too poor, report it to mods...
A post like your IS an advice because people read and follow it. What is wrong is not that you write or my opinion but people behaviour
I read the "risk" word but a lot of people would not. This is also the reason I don't wrote the dd command: search and learn! Most of the messages you read here are of people who have broken their own terminal because just followed a post like your, without knowing what are doing.
N

sd26 said:
Everything works but like me you take a risk in not using the exact boot.img.
Click to expand...
Click to collapse
I see in your first screenshot the fingerprint-id menuentry is gone.... does your fingerprint-sensor working properly ?
I rooted my mediapad m3 lite 10 in the same way, but my boot-image is the right version. ( installed is BAH-W09C100B257, firmware downloaded with the huawei firmware finder app is exactly BAH-W09C100B257) . My fingerprint menuentry is gone too.....and the sensor doesnt work (with the working registered fingerprint before the rooting)
Marc

#marcg# said:
I see in your first screenshot the fingerprint-id menuentry is gone.... does your fingerprint-sensor working properly ?
I rooted my mediapad m3 lite 10 in the same way, but my boot-image is the right version. ( installed is BAH-W09C100B257, firmware downloaded with the huawei firmware finder app is exactly BAH-W09C100B257) . My fingerprint menuentry is gone too.....and the sensor doesnt work (with the working registered fingerprint before the rooting)
Marc
Click to expand...
Click to collapse
I did not have the fingerprint option activated so I checked it and found my sensor also does not work with the patched boot.img on. I could search and find the fingerprint menu entry but could not get it to operate. Reflashing the stock boot.img returned the sensor menu and fingerprint to normal but of course you lose root. More searching for solutions required.
Also I'm using the TWRP-3.2.1-bah-20180627.img recovery. The volume keys don't work so the hurupdater script I'd like to use aborts. Anyone got any other recovery for a CPN-W09C128B006?.

sd26 said:
I did not have the fingerprint option activated so I checked it and found my sensor also does not work with the patched boot.img on. I could search and find the fingerprint menu entry but could not get it to operate. Reflashing the stock boot.img returned the sensor menu and fingerprint to normal but of course you lose root. More searching for solutions required.
Also I'm using the TWRP-3.2.1-bah-20180627.img recovery. The volume keys don't work so the hurupdater script I'd like to use aborts. Anyone got any other recovery for a CPN-W09C128B006?.
Click to expand...
Click to collapse
I have

avkjbl5bak said:
Brand new here, looking to unlock, root and then flash a standard Android build or custom DeGoogled ROM for my new device. I was looking to find a way to unlock the bootloader to start and found that Huawei have stopped giving out unlock codes and that the info around unlocking wasn't great so I made a note of all my steps as below.
Please let me know if this works for you and if you have any issues, please also read and follow the guidelines carefully as there are lots of things like using all the applications as an administator and changing directories that are important.
I am also looking for a way to install TWRP or another recovery thing on this device so I don't brick it, as I want to root the tablet and muck around with it. Has anyone got any experience of doing this successfully and does anyone have links to methods to create a cloned backup of the standard OS?
This was done on a brand new Mediapad M3 Lite 8 (the Wifi version, not LTE) with Android 7.0, EMUI 5.1, CPN-W09, build CPN-W09C100B251 - BUT will probably work on the LTE version, the non-lite version and the 7 and 10 inch models.
IMPORTANT: This costs money and is done through the DC Unlocker tool, it costs 4 credits (4 euros/dollars) for the Mediapad M3 Lite 8 (Wifi, not LTE) as Huawei now do not offer the bootloader code AT ALL . I have copied/streamlined the steps below that were found as guides originally at the dc unlocker website, check their site guides to find originals.
Step 1 - Developer Options enable
Go to settings, about tablet, tap build number 7 times to unlock developer options
Go to developer options, enable OEM unlock, enable USB debugging
Step 2 - Enable manufacture mode
If your phone has a dialpad, enter dial pad code *#*#2846579#*#*
IF your phone doesn't have a dialpad, go to calculator and enter ()()2846579()()=
This willl take you to a developer menu, select "Project Menu", "Background settings", "USB ports settings", "Manufacture mode".
Step 3 - Install drivers
Connect your Android device to your PC with a usb cable and either install Hisuite from the connected drive that will attach, or download it from the Huawei website by searching for Huawei Hisuite and going to their official website.
To check this has worked, go to Device Manager on your PC and look for Modems - there should be an entry called Android Adapter Modem - if this is not present try disconnecting/reconnecting your device and restarting Hisuite.
Step 4 - Read bootloader code
Download the latest DC Unlocker tool from dc-unlocker dot com and extract it, then AS AN ADMINISTRATOR (right click and Run as Administrator) run the client.exe (was called dc-unlockerclient2.exe)
Click Select Manufacturer dropdown and change to Huawei Phones, not Modems, press the magnifier/search icon at bottom left and your phone info should be found. This should also
Step 5 - Buy credits from the dc unlocker site as a new user, try 4 credits first and then login with these new user details in the dc unlocker application on your PC, this will show your credits and the phone connected as well as the cost. Click the Unlocking icon on the top right and click Read botloader code to get your code. Make a note of this/copy it somewhere.
Step 6 - Go back to the folder that dc unlocker is in
Go into the unzipped folder and then copy the location of this folder by clicking on the address bar in File Explorer and copying this location, you'll have something similar to
C:\Users\ExampleUser\Downloads\dc-unlocker2client_1.00.1403
Step 7 - Turn off your phone and turn it back on holding the Vol down and Power buttons to enter fastboot mode, connect your device to your PC
Step 8 - Open cmd by searching for cmd in windows, right click cmd and open it as administrator, you'll get the black and white windows terminal
In the terminal type "cd C:\Users\ExampleUser\Downloads\dc-unlocker2client_1.00.1403" (or the path for the latest version of the dc unlocker you have downloaded) without the quotation marks and with YOUR directory path as described above. The command cd just changes directory to the one you give. Your terminal should now show the above directory as the path in which it now sends commands, i.e the > mark is now displayed after the directory path we copied
Step 9 - Type "adb devices" without quotation marks to start the adb daemon
Step 10 - Type "fastboot devices" without quotation marks and you should see a device number with the word fastboot next to it.
Step 11 - Now type "fastboot oem unlock" without the quotation marks, followed by a space and then your bootloader unlock code i.e
fastboot oem unlock XYZ123456789
Step 12 - Your device should show a screen asking you to accept the unlock, then onto another screen where you should press the power key to continue onto booting your factory reset unlocked device.
Step 13 - You might have to disconnect the USB cable and reboot your device now, and you'll set up the device from scratch again - but now the bootloader unlocked, allowing you to load stuff like TWRP if you can find the right version - which I can't right now! :good:
Click to expand...
Click to collapse
Did you ever get and answer to your question about cloning or getting the original factory images. I've been trying on and off for 9months. I have unlocked the bootloader and backed up using TWRP (from the 10inch model), but when I relocked the bootloader everything fell apart... unstable boot loops, etc. not sure if I had to wipe recovery I burned with TWRP or what. Also TWRP does not back-up the data partition I think due to encryption (from other posts I read). My goal was to rebrand a pile of the Chinese version tablets I have to US because we use them in our product, and the US are not available, so rebranding would give me more time before to find a replacement. Any clues would help!!!

sd26 said:
I did not have the fingerprint option activated so I checked it and found my sensor also does not work with the patched boot.img on. I could search and find the fingerprint menu entry but could not get it to operate. Reflashing the stock boot.img returned the sensor menu and fingerprint to normal but of course you lose root. More searching for solutions required.
Also I'm using the TWRP-3.2.1-bah-20180627.img recovery. The volume keys don't work so the hurupdater script I'd like to use aborts. Anyone got any other recovery for a CPN-W09C128B006?.
Click to expand...
Click to collapse
I successfully rooted my CPN-L09 without loosing fp sensor, have a look here: https://forum.xda-developers.com/mediapad-m3/help/to-patch-boot-img-magisk-v17-3-t3938629

Hi
im a new member but have been using the site for ages.
my mediapad m3 is also wifi only and im trying to get the code for the bootloader to be unlocked except for the fact that my calculator app isn't scientific enough (lol) to include brackets.
what do I do to get the code or update my calc app?
alex

bigprat9 said:
Hi
im a new member but have been using the site for ages.
my mediapad m3 is also wifi only and im trying to get the code for the bootloader to be unlocked except for the fact that my calculator app isn't scientific enough (lol) to include brackets.
what do I do to get the code or update my calc app?
alex
Click to expand...
Click to collapse
You have to use the calculator in landscape mode (turn on auto-rotate) and then the bracket buttons will appear.
So I finally got around to installing this on my stock version. I found 16GB was too limiting and I was hoping to use the SD card to expand the space so I could use it for a few more years. I purchased the code from DC_unlocker.
A couple of things I noticed while following the guide. To enter fastboot mode, holding down the volume down and power button doesn't seem to work. What you to do is while it's off, hold down the volume down button and plug in the microusb cable, while continuing to hold it down. You could also enter fastboot using an ADB command.
Also I couldn't wipe anything before installing the new roms, I got error messages. I'm not sure what that means. Anyways after installing android 9, it seemed to take a very long time to first boot. The graphic animation is going, but I wasn't sure if it was working so I hard reset once, tried to boot again and then waited again, hard reset again and put it down thinking I would have to look into the error messages and when I came back it was up and running.

Hi, I'm hoping someone can help me out here.
A few days ago, I followed the instructions unlocking the bootloader of my Mediapad M3 lite 8 (CPN-W09) and sure enough, I successfully unlocked the bootloader. However I've now run into another problem - I cannot get the FRP on the tablet to be unlocked!
Nothing I've tried seems to get it to unlock. The (only) Google account used on the tablet has been my own, and it's been no problem signing back into my account when factory resetting the tablet. One time when investigating it, after a factory reset it did say that it was "restricted" but again, adding my Google account details on the setup was no issue, but even after then deleting the account (which, if I'm right, should set FRP to "unlocked") when I enter into fastboot mode it still shows FRP as locked! And it shows it no matter what I do, wherever the Google account is "active" on the tablet or not, and the last four or five times I've did a factory reset with both data and cache partition wipes done and nothing budges. I think I'm at a lost cause here - the "OEM Unlock" option in the developer settings is totally greyed out. ?
Of course, the tablet is still "usable" but there is no way to carry out special functions after unlocking the bootloader, like rooting, install TWRP, custom ROM etc. and it just kinds of stands in a limbo.
I've tried searching here on XDA and the web in general, high and low, to see if this problem has affected anyone else, and strangely it doesn't seem to happen to anyone else!
For the record, I've also tried hardreset.info's FRP unlock tool which claimed to be successful, but it clearly wasn't!
I hope someone out there might have a solution to my woe - as I think I've partially crippled by M3 Lite 8 otherwise by trying to unlock the bootloader.

lawhec said:
Hi, I'm hoping someone can help me out here.
A few days ago, I followed the instructions unlocking the bootloader of my Mediapad M3 lite 8 (CPN-W09) and sure enough, I successfully unlocked the bootloader. However I've now run into another problem - I cannot get the FRP on the tablet to be unlocked!
Nothing I've tried seems to get it to unlock. The (only) Google account used on the tablet has been my own, and it's been no problem signing back into my account when factory resetting the tablet. One time when investigating it, after a factory reset it did say that it was "restricted" but again, adding my Google account details on the setup was no issue, but even after then deleting the account (which, if I'm right, should set FRP to "unlocked") when I enter into fastboot mode it still shows FRP as locked! And it shows it no matter what I do, wherever the Google account is "active" on the tablet or not, and the last four or five times I've did a factory reset with both data and cache partition wipes done and nothing budges. I think I'm at a lost cause here - the "OEM Unlock" option in the developer settings is totally greyed out. ?
Of course, the tablet is still "usable" but there is no way to carry out special functions after unlocking the bootloader, like rooting, install TWRP, custom ROM etc. and it just kinds of stands in a limbo.
I've tried searching here on XDA and the web in general, high and low, to see if this problem has affected anyone else, and strangely it doesn't seem to happen to anyone else!
For the record, I've also tried hardreset.info's FRP unlock tool which claimed to be successful, but it clearly wasn't!
I hope someone out there might have a solution to my woe - as I think I've partially crippled by M3 Lite 8 otherwise by trying to unlock the bootloader.
Click to expand...
Click to collapse
You could try to lock bootloader back, and before to unlock bootloader again, first just unlock OEM .

surdu_petru said:
You could try to lock bootloader back, and before to unlock bootloader again, first just unlock OEM .
Click to expand...
Click to collapse
I did try this at the time, and I couldn't get it to work. But I had another try at it yesterday and I managed to get the bootloader locked again, toggle OEM unlock to "off" and unlocked the bootloader once more and it worked!
So after doing this, I tried to get TWRP 3.3.1-1 flashed but it would stay frozen on the screen - I then read that I needed to install TWRP 3.2.0-0 first, install the August 2019 Lineage 16 firmware, then go back to the bootloader, flash TWRP 3.3.1-0, check everything was OK and then return to bootloader to finally flash TWRP 3.3.1-1. Success! I then flashed the latest Lineage OS 17.1 firmware along with Open Gapps (ARM64, Android 10, nano) and so far everything has worked OK. I just need to download all my apps again, but I'm sure it will give my CPN-W09 a new lease of life!
I used to do some rooting previously with Android handsets in the past, but the last time was two years ago (rooting & upgrading an Alcatel handset to Android 6.0) and FRP was new to me, throwing me off.
I've donated some Euros to you as an appreciation for your work & advice. Merci beaucoup!

lawhec said:
I did try this at the time, and I couldn't get it to work. But I had another try at it yesterday and I managed to get the bootloader locked again, toggle OEM unlock to "off" and unlocked the bootloader once more and it worked!
So after doing this, I tried to get TWRP 3.3.1-1 flashed but it would stay frozen on the screen - I then read that I needed to install TWRP 3.2.0-0 first, install the August 2019 Lineage 16 firmware, then go back to the bootloader, flash TWRP 3.3.1-0, check everything was OK and then return to bootloader to finally flash TWRP 3.3.1-1. Success! I then flashed the latest Lineage OS 17.1 firmware along with Open Gapps (ARM64, Android 10, nano) and so far everything has worked OK. I just need to download all my apps again, but I'm sure it will give my CPN-W09 a new lease of life!
I used to do some rooting previously with Android handsets in the past, but the last time was two years ago (rooting & upgrading an Alcatel handset to Android 6.0) and FRP was new to me, throwing me off.
I've donated some Euros to you as an appreciation for your work & advice. Merci beaucoup!
Click to expand...
Click to collapse
Thank you very much too

Hello
I followed the steps here to unlock the bootloader with my btv-dl09, that worked fine even its not lite.. :fingers-crossed:
but now, any clues? may i ll try the way of lawhec with
lawhec said:
So after doing this, I tried to get TWRP 3.3.1-1 flashed but it would stay frozen on the screen - I then read that I needed to install TWRP 3.2.0-0 first, install the August 2019 Lineage 16 firmware, then go back to the bootloader, flash TWRP 3.3.1-0, check everything was OK and then return to bootloader to finally flash TWRP 3.3.1-1. Success! I then flashed the latest Lineage OS 17.1 firmware along with Open Gapps (ARM64, Android 10, nano) and so far everything has worked OK. I just need to download all my apps again, but I'm sure it will give my CPN-W09 a new lease of life!
Click to expand...
Click to collapse
but cant find the TWRP 3.3.1-1?
may u Mean
[Recovery][Official] TWRP 3.3.1-10 [G97*0][Snap][3.Jan.20]
[Recovery][Official] TWRP 3.3.1-12 Snapdragon [N97x0][10.Nov.19]
[RECOVERY][ROOT]TWRP 3.3.1-1 Galaxy J6+/J610F/FN/G/DS
???
if so, why u choose one of these? No Clue for me^^ plz let me know
greetz
ADD: just found
Developed By :letschky
twrp-3.1.1-1-next.img
Jul 13, 2017 | 03:32PM
maybe these? looks pretty old but still working? Oo

P10 lite bootloader unlock (June 2020, Windows install)

Damn, it's been a while since I was here. Back then it was mostly about Windows PDAs.
Disclaimer:
Your warranty after this process is void and your phone will tell you it can not be trusted because it's unlocked.
This is what worked for me. I did it on Windows 10. I just went through the process and it was a bit of mixing and matching various guides.
I'm not your tech support, the only one responsible for following this is you.
If any part of this guide doesn't work for you: too bad. Maybe Google or other users can help you with your problem.
Needed:
An internet-enabled PC
Huawei P10 Lite phone
USB to Micro-USB cable
HiSuite https://consumer.huawei.com/en/support/hisuite/
DC-Unlocker (comes with abd & fastboot) https://www.dc-unlocker.com/
Optional: Huawei Driver Tools https://mega.nz/file/qrpBUIKA#zaI8Th0ovgyK48VzFUFAzMNWF2r_R12lNc-uJZsIx4w
Note: I recommend not to buy credits until you've come to the part in my guide which says buy credits.
Install HiSuite
Unzip and install HiSuite on your PC
Start it at the end of the installation (it should show a button with "Start")
Connect the phone to your computer with the USB cable and follow the instructions in HiSuite to install HiSuite on your phone
At the bottom of the (Windows) HiSuite there's an option to do a System Upgrade, mine had the option to install an older version (Android 7 with EMUI 5.1) Install this. (This will take some time)
Note: I've read that some people couldn't downgrade because of modern security fixes. It's possible I didn't run the latest updates, but as far as I'm aware everything was up to date.
The following part might be annoying because HiSuite tries to connect to the phone. I uninstalled it at this point, but I had the Driver Tools installed (and did the Install within said tools).
Phone
Once the phone restarted, go through the set-up as quickly as possible (skip WiFi-setup, decline all optional things and skip account creation)
Go to Settings > System > About Phone > Keep tapping the "Build Number" until you're told you're a developer
Find the developer options (Usually in Settings > System and enable USB/ADB debugging
Open the telephone app and type: *#*#2846579#*#* (it should open a menu automatically after the last *)
Click Background Settings > USB Port Settings and select Manufacture Mode
Once Manufacture Mode is selected, leave the phone untouched
DC-Unlocker, part 1
Unzip the contents of the DC-unlocker zip
Start dc-unlocker2client.exe
In the top left, under "Select manufacturer" change "Huawei modems" to "Huawei phones"
Click the button with the magnifying glass, if you did the previous step hovering should say "Detect phone" on hover
Example out put (this might differ for you, but triple-check a port is detected):
Code:
DC - Unlocker 2 Client 1.00.1431
Detecting phone :
selection :
manufacturer - Huawei phones
model - Auto detect (recommended)
Found Applications port COM3
Model : Huawei HiSilicon Kirin Android phone
Serial NR. : [redacted]
Firmware : System 5.1.0.78(0VVV)
DC-Unlocker, part 2
Check again if a model and port is shown in both the output and above the big buttons.
In the top right, click About > Buy Credits
DC-Unlocker site
Select your payment processor
By default it creates a new account, unless you've used this service before, you probably want to keep it this way.
Fill in a username and an email address
You need 4 credits (€4 for me) at the time of writing this, but do check the link "How much do I need?"
Hit confirm and go through the payment process, wait until everything is processed (if you use a script blocker, you might want to temporarily disable it).
At the end you should get confirmation page with your username, a password and 4 credits. (Username and password will be mailed too.)
DC-Unlocker, part 3
Go back to DC-Unlocker
In the top right, click "Server" and enter the details you've gotten
Click "Check login" and see if the output window shows your username and the credits you have left (which should be 4 at the time of writing)
In the top right, click "Unlocking" and then click "Read bootloader code"
The output should show you the bootloader code once it's done. Copy this to a textfile and save it (and keep it in the memory).
You can close DC unlocker once you've saved the code.
Don't be lazy and try to copy/paste the commands following in the next section, since you want to keep the code in your memory, as seen in step 6. Besides, I'll show you some shortcuts anyway! Keep in mind that our example code is 1111222233334444 (yours most likely isn't, mine sure wasn't) and that [tab] will mean the tab-key on your keyboard.
PowerShell/Command Prompt
In the folder where you unzipped dc-unlocker2client.exe to, press [shift] on your keyboard and hold it while right-clicking in an empty area underneath the files, then click "Open PowerShell (or command prompt) here".
Whatever command-line you started will open, type ad[tab] and adb.exe should be appear (shows up as .\adb.exe in PowerShell)
Follow this by typing reboot bootloader. So it should show as
Code:
./adb.exe reboot bootloader
(no ./ in command prompt)
Hit [enter] and the phone should reboot to a screen with a white background
Once the bootloader screen shows (white background with the android mascot) type fast[tab] in PowerShell/Command prompt and follow it up by oem unlock[space]
If you still have the bootloader code in memory, right-click in PowerShell/Command prompt to paste it. Your entire line should be
Code:
./fastboot.exe oem unlock 1111222233334444
Hit [enter], the unlocking will start and factory reset your phone. My output was:
Code:
(bootloader) The device will reboot and do factory reset...
OKAY [ 10.330s]
If everything went right you'll see the Huawei/Android bootscreen and then a warning that the phone is "unlocked and can not be trusted" to use or something like that. It'll boot into the OS after that.
I'd like to remind you of the disclaimers at the top, but hopefully this will help some of you going through the process.
Edits
Forgot about USB debugging
Added the warning you get after a successful unlock
Changed the build number tapping sentence
Rewrote a sentence for clarity

Very nice guide, if ppl ask about unlocking we just link this from now on...

This is a very helpful guide, thank you so much! My question is, if I wanted to flash twrp when the bootloader is unlocked, is there a way to upgrade it to Oreo once again without locking the bootloader again? I can't seem to find a twrp tutorial where they use Nougat/Emui 5 to flash twrp, and all the tutorials to upgrade to Oreo/Emui 8 look like they're locking the bootloader once again and I don't really want to waste 4 euros to go back to the start.

A bootloader unlock should be permanent? I've been moving between Android 7 (EMUI 5), Android 8 (Emui 8) and Android 10 myself in all kinds of directions.
Besides, I think the code is tied to your device, so you should be able to use it again. (But I'm not sure about this!)

Syrion said:
A bootloader unlock should be permanent? I've been moving between Android 7 (EMUI 5), Android 8 (Emui 8) and Android 10 myself in all kinds of directions.
Besides, I think the code is tied to your device, so you should be able to use it again. (But I'm not sure about this!)
Click to expand...
Click to collapse
Thank you for your quick reply! So after the bootloader unlock, did you flash twrp on Android 7? or did you upgrade your phone to Android 8 and flash twrp then? How did you manage to upgrade it to Android 8?
I really appreciate your help with the previous tutorial, I've done everything until the buy credits part (I'm waiting a bit for that part) and I'm planning on getting to the end of the tutorial at least before August. My idea is to upgrade to Android 8 + flash twrp and Magisk, hopefully I'll be able to do all of that!

I did the above procedure on an up to date, official stock Huawei android. Both EMUI & Android are 8. I'm in the Netherlands, so it'should be the same model as in Spain. (WAS-LX1A)
The HiSuite step is to downgrade from EMUI 8 (Android 8) to EMUI 5 (Android 7), since that seems to have less securities to make it easier to unlock the bootloader.

Oh, I understand now! One more question (sorry if I'm being annoying, it's my first time playing with a Huawei, I must say that Samsungs are far easier to root/unlock lol): If I follow your method, but after getting the bootloader unlock code and right before unlocking the bootloader, I use HiSuite to upgrade back to Android 8/Emui 8, would the procedure be fine? like, it's totally fine to unlock the bootloader either with android 7 or 8, the only time I need android 7 is to get my code because DC unlocker supports them better, right?
Again, thank you so much!!!

I'm not sure to be honest. But I reverted to 7/EMUI 5 because I read around here on the board that's better for trying to unlock.

Thank you,
Only fastboot.exe oem unlock xxxxx failed with the following error: FAILED (remote: Command not allowed)
finished. total time: 0.022s
This was resolved by going back to settings, developer options and check 'enable oem unlocking'. I didn't read that in your guide.

Syrion said:
I did the above procedure on an up to date, official stock Huawei android. Both EMUI & Android are 8. I'm in the Netherlands, so it'should be the same model as in Spain. (WAS-LX1A)
The HiSuite step is to downgrade from EMUI 8 (Android 8) to EMUI 5 (Android 7), since that seems to have less securities to make it easier to unlock the bootloader.
Click to expand...
Click to collapse
Hi, I have the same model. But I can't figure out how to update to EMUI8 again (or which custom recovery works). It doesn't find the update in HiSuite and it doesn't find it via System update. Do you happen to know how? Thank you.

What should I do next?
I did manage to unlock the bootloader thanks to this very clear post. I did downgrade to Android 7 / Emui 5.1.1 and have a working rooted system but he is trying to upgrade again to android 8 / Emui 8. I know by experience that it will lock again with the higher version (the unlock code can be used several time fortunately).
I did try to flash some roms on it, going for instance to Lineage OS 14 but it was all a disaster and I think that I need some guidance now..
I am not a newbee for rooting and flashing but do not understand yet the Huawei system; is that so that I have to choose a new ROM with caution, especially with the Emui version? Looking at the old posts, I find some old ROM's even with Emui 5 version but do not understand the path that I should follow to progressively upgrade.
Thanks in advance for your orientations!

Syrion said:
A bootloader unlock should be permanent? I've been moving between Android 7 (EMUI 5), Android 8 (Emui 8) and Android 10 myself in all kinds of directions.
Besides, I think the code is tied to your device, so you should be able to use it again. (But I'm not sure about this!)
Click to expand...
Click to collapse
For me, I did get to relock by accident but I confirm that the unlock code is permanent (at least, I did use it 3 times with no problem!)

P10 lite Pinout
I would like to know if they have tried to unlock the bootloader with the Pinout method.

Correcaminos604 said:
I did manage to unlock the bootloader thanks to this very clear post. I did downgrade to Android 7 / Emui 5.1.1 and have a working rooted system but he is trying to upgrade again to android 8 / Emui 8. I know by experience that it will lock again with the higher version (the unlock code can be used several time fortunately).
I did try to flash some roms on it, going for instance to Lineage OS 14 but it was all a disaster and I think that I need some guidance now..
I am not a newbee for rooting and flashing but do not understand yet the Huawei system; is that so that I have to choose a new ROM with caution, especially with the Emui version? Looking at the old posts, I find some old ROM's even with Emui 5 version but do not understand the path that I should follow to progressively upgrade.
Thanks in advance for your orientations!
Click to expand...
Click to collapse
I ran into the same problem. Did you find a solution?
I followed this guide, downgraded to EMUI 5.1.1 and tried to install several custom ROMs. But none of them will boot. It is always stuck on the splash screen with the "bootloader unlocked" warning and doesn't get any further.
I tried installing LineageOS 17.1, 15.1, and RR on Android 9 but no luck on any of these. Also, is it possible to revert back to the stock ROM? Maybe that will help...
Thank you all for any help

Nothing unfortunately, I did finally reinstall Android 7 with HWOTA https://www.******.com/huawei-hwota-tool-for-huawei-devices/ and managed to have a working Android 7 / Emui 5 that works perfectly if you do not forget to make a complete wipe/reset when rebooting. The bootloader is still unlocked.
Strange enough this system is upgradable through the normal update system (parameter/system/update) and keeps the unlocked bootloader. Today, I did upgrade to a very last built today - 394(C432) - without problem. Apparently I just have to re-root it through trwp.
I keep it like this now, finally, the Huawei system is not bad! and it is yet rooted
be-rty said:
I ran into the same problem. Did you find a solution?
I followed this guide, downgraded to EMUI 5.1.1 and tried to install several custom ROMs. But none of them will boot. It is always stuck on the splash screen with the "bootloader unlocked" warning and doesn't get any further.
I tried installing LineageOS 17.1, 15.1, and RR on Android 9 but no luck on any of these. Also, is it possible to revert back to the stock ROM? Maybe that will help...
Thank you all for any help
Click to expand...
Click to collapse

Correcaminos604 said:
Nothing unfortunately, I did finally reinstall Android 7 with HWOTA https://www.******.com/huawei-hwota-tool-for-huawei-devices/ and managed to have a working Android 7 / Emui 5 that works perfectly if you do not forget to make a complete wipe/reset when rebooting. The bootloader is still unlocked.
Strange enough this system is upgradable through the normal update system (parameter/system/update) and keeps the unlocked bootloader. Today, I did upgrade to a very last built today - 394(C432) - without problem. Apparently I just have to re-root it through trwp.
I keep it like this now, finally, the Huawei system is not bad! and it is yet rooted
Click to expand...
Click to collapse
Is 394(C432) finally coming as OTA? Back in July I had to download it via firmware finder and flash it with HWOTA after unlocking the bootloader... lol just to relock after updating... However even Huawei support didn't know about 394 and denied it would even exist, not too surprising in hindsight! Still eversince I was wondering if it ever comes as simple OTA, which indeed seems the case eventually!
Sent from my Google Pixel 3 XL using XDA Labs

Yes, WASLX1A 8.0.0.0394(C432) did arrive as OTA around the end of October. I was surprised as I did not expect any new update on this phone!
Sam Nakamura said:
Is 394(C432) finally coming as OTA? Back in July I had to download it via firmware finder and flash it with HWOTA after unlocking the bootloader... lol just to relock after updating... However even Huawei support didn't know about 394 and denied it would even exist, not too surprising in hindsight! Still eversince I was wondering if it ever comes as simple OTA, which indeed seems the case eventually!
Sent from my Google Pixel 3 XL using XDA Labs
Click to expand...
Click to collapse

DC-Unlocker can't find my phone
I followed your instructions, but when I click the magnifying glass on DC-unlocker it says
===================================================================
DC - Unlocker 2 Client 1.00.1431
Detecting phone :
selection :
manufacturer - Huawei phones
model - Auto detect (recommended)
Found Applications port COM6
===================================================================
But then nothing else is listed .....
My model is WAS-LX1

Correcaminos604 said:
Yes, WASLX1A 8.0.0.0394(C432) did arrive as OTA around the end of October. I was surprised as I did not expect any new update on this phone!
Click to expand...
Click to collapse
Yeah, it's actually crazy cool that it was patched after all this years, I however read it was primary updated to support the coronavirus warning App framework! That's actually the reason for Huawei to push another last update!
Sounds like a crazy conspiracy theory but was written on their Homepage...
Sent from my Google Pixel 3 XL using XDA Labs

Downgrade option doesn't exist for me in Hisuite. My phone is WAS-LX2 8.0.0.370(C185). The last update I got was on 13 February 2019 with the 2019 Feb security patches. Is there a free way to unlock bootloader?