{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team OpenKirin presents AOSP Oreo MR1 (8.1) for Honor 8 Pro based on Project Treble.
Current issues:
2G/3G network only show full signal strength
Installation
flash EMUI8 and unlock bootloader
flash system.img via fastboot
Code:
[I]command:[/I]
fastboot flash system system.img
do a factory reset via stock recovery and enjoy
Download
https://mega.nz/#!30ADUSoB!Y6wtteDhF8Bn-V-eunNSatURSag6C28mRK4xYBWzGQc
Stock Huawei Camera
The stock huawei camera.. works BUT video recording is broken, aswell as hdr - normal picture taking works though (via both cameras!) - thats the reason the rom won't ship with the cam out of the box.
Simply grab my stock huawei camera magisk module from the link below and install it with magisk. reboot and enjoy stock camera pic quality
https://mega.nz/#!7hQDhQAK!p2s7jQp9-nhp2-O1U2s2GrBB9UVBhgKDtFfHTq_CHvI
SafetyNet
The first boot of this rom has to be done with stock kernel (no SuperSU/Magisk installed)
Afterwards simply install magisk via the in-app boot image patcher (for huawei devices: RAMDISK.img) and fastboot - voila! you are done.
Credits
* @OldDroid
* @surdu_petru
* @XePeleato
Special Thanks
* @svetius
XDA:DevDB Information
Treble AOSP Oreo MR1, ROM for the Honor 8 Pro
Contributors
OldDroid, surdu_petru, XePeleato
Source Code: https://github.com/OpenKirin-Treble
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: Full stock EMUI 8.0
Based On: AOSP
Version Information
Status: Snapshot
Created 2018-03-04
Last Updated 2018-03-04
Ohhhhhh
Super thank you
First to view and download
Dirty Flash
Hi, can i dirty flash it over 8.0 treble?
sidharth.299 said:
Hi, can i dirty flash it over 8.0 treble?
Click to expand...
Click to collapse
factory reset is highly recommended.
Regards
Can this be installed on my V9?
Assuming I don't have any flashing errors this time!
Magisk
Hi i was able to boot up. Dirty flashed it, seems fine till now. Can you share how i should install magisk to get the stocl camera.
@OldDroid even after flashing patched recovery
Magisk shows not installed
Any mistake ?
Edit: understand that boot image not recovery to be patched
Thanks
swapcall said:
@OldDroid even after flashing patched recovery
Magisk shows not installed
Any mistake ?
Click to expand...
Click to collapse
you should patch your stock ramdisk.img via the latest magiskmanager and flash that via fastboot: fastboot flash ramdisk patched_boot.img
@OldDroid I was wondering if you got my PMs about the info you asked for?
Ramdisk
Hi, Can any share link for ramdisk image file?
Is Stock camera is fully working via magisk module ?
---------- Post added at 10:32 AM ---------- Previous post was at 10:30 AM ----------
Hi @Old droid , i m currently running on your open kirin treble AOSP rom ,can i install stock cam magisk module on your AOSP rom which I m currently running . ?
awesome
Tysm @OldDroid for this......will try it out soon......
sidharth.299 said:
Hi, Can any share link for ramdisk image file?
Click to expand...
Click to collapse
You can extract it from "update.app" using Huawei firmware extractor.
devanshu99 said:
Is Stock camera is fully working via magisk module ?
---------- Post added at 10:32 AM ---------- Previous post was at 10:30 AM ----------
Hi @Old droid , i m currently running on your open kirin treble AOSP rom ,can i install stock cam magisk module on your AOSP rom which I m currently running . ?
Click to expand...
Click to collapse
stock camera is included by default on my 8.0 aosp rom
OldDroid said:
stock camera is included by default on my 8.0 aosp rom
Click to expand...
Click to collapse
Ohkk dear, I thought this magisk module is more stable than that camera in AOSP, my fault.
---------- Post added at 03:46 PM ---------- Previous post was at 03:45 PM ----------
devanshu99 said:
Ohkk dear, I thought this magisk module is more stable than that camera in AOSP, my fault.
Click to expand...
Click to collapse
Any difference in this rom and that rom ?
devanshu99 said:
Ohkk dear, I thought this magisk module is more stable than that camera in AOSP, my fault.
---------- Post added at 03:46 PM ---------- Previous post was at 03:45 PM ----------
Any difference in this rom and that rom ?
Click to expand...
Click to collapse
android 8.1
OldDroid said:
android 8.1
Click to expand...
Click to collapse
Ohkk great ..
---------- Post added at 04:10 PM ---------- Previous post was at 03:56 PM ----------
devanshu99 said:
Ohkk great ..
Click to expand...
Click to collapse
Can I flash this rom on top of ur AOSP rom without fcatory reset ?
Same error with this attempted install. Guess I have to give up on getting AOSP. ?
writing 'system'...
FAILED (remote: sparse flash write failure)
videotape74 said:
Same error with this attempted install. Guess I have to give up on getting AOSP.
writing 'system'...
FAILED (remote: sparse flash write failure)
Click to expand...
Click to collapse
Simply wipe system and cache before flashing via fastboot
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TeamHorizon's XenonHD rom builds for Nexus 4 (mako)
http://www.xenonhd.com/
XenonHD is a custom firmware aka ROM for various Android devices. It is based on CyanogenMod 14.1 with additional features, performance and battery life improvements.
The idea behind XenonHD is to give users a ROM that is "blazing fast, rock stable and buttery smooth".
Device Source:
https://github.com/TeamHorizon/android_device_lge_mako
https://github.com/TeamHorizon/android_kernel_lge_mako
Flashing Instructions:
To install this ROM you will need to have a latest custom Recovery such as TWRP or PhilZ installed.
Copy the downloaded ROM to your phone.
Boot into your recovery
Back up your ROM
Enter recovery
Make a full wipe (system, data, cache, dalvik)
Install the ROM
Install GAPPS package
Magisk is included in ROM. DO NOT FLASH SUPERSU
Download Links:
ROM: Official build (mako)
What's new?: Changelog
Gapps: opengapps.org
XDA:DevDB Information
Official XenonHD 7.1 ROM by TeamHorizon, ROM for the Google Nexus 4
Contributors
nitin.chobhe, dadi11
Source Code: https://github.com/TeamHorizon
ROM OS Version: 7.x Nougat
ROM Firmware Required: Unlocked BL, Recovery
Based On: CyanogenMod
Version Information
Status: Testing
Created 2016-11-14
Last Updated 2017-04-21
Main features:
XenonOTA
XenonHD Changelog
NovaLauncher, Adaway, Kernel Adiutor
Root, adb, dev options, advanced reboot & installing apks enabled by default
Pixel UI and wallpaper
Material sounds & icons
Network indicator & battery bar in status bar
Removed unnecessary things
Under the hood improvements and optimizations
...and more on the way!
Bugs:
Links:
G+: https://plus.google.com/u/0/communities/110254322179967248992
Github: https://github.com/TeamHorizon?tab=repositories
Crowdin (translations): https://crowdin.com/project/xenonhd-rom
Changelog (auto-updated): https://mirrors.c0urier.net/android/teamhorizon/Changelog.txt
Screenshots
Nitin
You are spoiling us! Thanks for your efforts on Nexus 4!!
Sent from my SM-T810 using XDA-Developers mobile app
thanks man thanks
---------- Post added at 10:35 PM ---------- Previous post was at 10:33 PM ----------
nitin thanks answer Dirty Unicorns update ?
Couple of questions...
1) Does this build have CAF optimization to it for smoother experience?
2) Any issues you've encountered when using the app?
Its been a long time since I used a completely Cyanogen Mod...I hope this will be a great return to that!
I flashed all, but dont boot. Stuck on HD logo.
aveangelus said:
I flashed all, but dont boot. Stuck on HD logo.
Click to expand...
Click to collapse
It works, as mentioned in OP, it takes a bit of time. Wait for it to finish
Nitin
nitin.chobhe said:
It works, as mentioned in OP, it takes a bit of time. Wait for it to finish
Nitin
Click to expand...
Click to collapse
I've been waiting for 25 minutes. This is normal? I've tried it twice, with new files.
aveangelus said:
I've been waiting for 25 minutes. This is normal? I've tried it twice, with new files.
Click to expand...
Click to collapse
No, that's not normal. I got it up and running in 7-8 mins.
What gapps pack are you using? What all partitions dis you wipe?
Nitin
nitin.chobhe said:
No, that's not normal. I got it up and running in 7-8 mins.
What gapps pack are you using? What all partitions dis you wipe?
Nitin
Click to expand...
Click to collapse
- Gapps Pico
- Format: System, data, cache, dalvik, Media and internal.
Dammit you guys need to step down. I have only one N4 to run all these ROMs.
aveangelus said:
- Gapps Pico
- Format: System, data, cache, dalvik, Media and internal.
Click to expand...
Click to collapse
If you format internal how did to install the rom?
I used "open_gapps-arm-7.1-pico-20161024" (because I had it on my phone) and it worked without any issues
Nitin
twrp yes clean and advanced clean flash rom flash open_gapps-arm-7.1-pico-20161111 after boot 20 mınutes help ınstalled multı twrp 3.0.0 flashed offıcal twrp ınstall ıt ?
@nitin.chobhe,
What is the difference between this and nitrogen ROM
(except that this is CM base)?
Sent from my Nexus 4 using Tapatalk
jolas said:
@nitin.chobhe,
What is the difference between this and nitrogen ROM
(except that this is CM base)?
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
There are lots of differences - This is just the first build and do not have as many customizations as Nitrogen OS. Nitrogen OS has Substratum and as we know CM has CMTE; so Xenon will also get CMTE when CM implements it
hasanben35 said:
twrp yes clean and advanced clean flash rom flash open_gapps-arm-7.1-pico-20161111 after boot 20 mınutes help ınstalled multı twrp 3.0.0 flashed offıcal twrp ınstall ıt ?
Click to expand...
Click to collapse
Flash the latest version of TWRP 3.0.2.0 and then try
Nitin
:crying:Flash the latest version of TWRP 3.0.2.0 and then try ıt bootlogo 7 mınutes:crying:
---------- Post added at 05:59 PM ---------- Previous post was at 05:58 PM ----------
sr3 super su not flash ? yes flash
nitin.chobhe said:
If you format internal how did to install the rom?
I used "open_gapps-arm-7.1-pico-20161024" (because I had it on my phone) and it worked without any issues
Nitin
Click to expand...
Click to collapse
I put the files before installation via usb twice!
hasanben35 said:
:crying:Flash the latest version of TWRP 3.0.2.0 and then try ıt bootlogo 7 mınutes:crying:
---------- Post added at 05:59 PM ---------- Previous post was at 05:58 PM ----------
sr3 super su not flash ? yes flash
Click to expand...
Click to collapse
No, do not flash it. Just flash the ROM and gapps...
aveangelus said:
I put the files before installation via usb twice!
Click to expand...
Click to collapse
Don't know why is it not working for you :| You are flashing ROM and Gapps, that's it right?
Nitin
flashed fınısh normal ?
---------- Post added at 06:26 PM ---------- Previous post was at 06:25 PM ----------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team OpenKirin presents AOSP Oreo for Honor 8 Pro based on Project Treble.
Since v0 all major bugs have been fixed and only a minor one is left.
Current issues:
2G/3G network only show full signal strength
Installation
flash EMUI8 and unlock bootloader
flash system.img via fastboot
Code:
[I]command:[/I]
fastboot flash system system.img
do a factory reset via stock recovery and enjoy
Download
[url]https://mega.nz/#!Hxgwwb4J!hYeo8N5wwdRSqPwV8JMgHhADVNowkpVZCVqjHxWtoLQ[/URL]
Credits
* @OldDroid
* @surdu_petru
* @XePeleato
Special Thanks
* @svetius
XDA:DevDB Information
Treble AOSP Oreo, ROM for the Honor 8 Pro
Contributors
OldDroid, surdu_petru, XePeleato, Phhusson
Source Code: [url]https://github.com/OpenKirin[/URL]
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: EMUI 8.0
Based On: AOSP
Version Information
Status: Beta
Created 2017-12-05
Last Updated 2018-01-25
Changelog
* v0 - initial version
never released
* v1 - beta release
fixed bluetooth
fixed FPS
fixed tethering
fixed MicroSD
enabled doze
* v2 - stable release
Say hello to GApps (Play Store, Google Calendar, Gboard, Google App, Search)
huawei stock camera is now included (beauty mode is not working, picture can be viewed in gallery)
Music & Gallery2 are gone, replaced by Lineage gallery and a modified variant of SnapdragonMusic
Update the system side security patch from 2017-11-05 to 2018-01-05
fixed the display glitches
fixed sim lost after reboot bug
fixed offline charging
fixed encryption
fixed aosp keyboard fc (replaced with Gboard)
fixed automatic APN detection
Horrible
sagarchow said:
Horrible
Click to expand...
Click to collapse
???
Sent from my DUK-L09 using Tapatalk
Does it use BOTH the back cameras? I maybe wrong but the vendor implementation is of stock then it should, right?
Lot of bugs. Will wait for another
This is amazing. Getting an AOSP build so quickly and without any major bugs like camera not working or RIL not working or WiFi issues, it's just totally amazing.
Project treble is really great.
Sent from my DUK-L09 using Tapatalk
sagarchow said:
Lot of bugs. Will wait for another
Click to expand...
Click to collapse
Uh you're wrong it's few bugs most major stuff is working and you say it's horrible?
It's good first release specially when it's first treble released rom for this device or couldn't be better. If u still wanna complain go fix the issues yourself and come back when you did so. Until then please stop acting douchy
Also @OldDroid I'll create a twrp version when I get home
That's absolutely wonderful
Does wide apperture mode available in this ROM ?
devanshu99 said:
Does wide apperture mode available in this ROM ?
Click to expand...
Click to collapse
No, until someone ports EMUI camera app
Twrp doesnt woking : i can see the twrp load with "openkirin team twrp" but after no touchscreen, no mtp, and the rom of course didn't work.
Please release an operational twrp
我能在荣耀v9上面使用它吗？
包括ROM和TWRP Recvory?
独影阑珊 said:
我能在荣耀v9上面使用它吗？
包括ROM和TWRP Recvory?
Click to expand...
Click to collapse
At least provide an English translation please!!
PalakMi said:
At least provide an English translation please!!
Click to expand...
Click to collapse
Sorry.
Can I use in Honor V9?
---------- Post added at 02:38 PM ---------- Previous post was at 02:36 PM ----------
PalakMi said:
At least provide an English translation please!!
Click to expand...
Click to collapse
Both ROM and Recovery
独影阑珊 said:
Sorry.
Can I use in Honor V9?
---------- Post added at 02:38 PM ---------- Previous post was at 02:36 PM ----------
Both ROM and Recovery
Click to expand...
Click to collapse
Just make sure that Oreo is running on your device
PalakMi said:
Just make sure that Oreo is running on your device
Click to expand...
Click to collapse
Yeah, I already have updated Oreo
独影阑珊 said:
Yeah, I already have updated Oreo
Click to expand...
Click to collapse
This will work for you
Will treble project in emui 8 will help to port stock camera in this ROM or not .?
devanshu99 said:
Will treble project in emui 8 will help to port stock camera in this ROM or not .?
Click to expand...
Click to collapse
I don't know. However, phhusson (the OP of treble thread) is working to port the EMUI camera app to treble's AOSP, now he is able to take a shot with it, but it's not saved.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DUOS:WW:12.0.A.18.01.01-ROW:AS
Android OS version: 8.0.0_sdk26
Google Apps: opengapps: 8.0, arm64, nano/pico (any patch doesn't needed)
Root/SuperUser: UNRooted
For devices: "hydrogen" , (unofficially "helium" supported)
Attention:
I suggest you to use my ROM,
though I only fix those bugs which doesn't require hard work.
If you don't like something, please, use stock ROM and don't write in this thread. Please.
Jumping straight to the point of this post, this is our road map to Android O.
VoLTE Fixed , at least for hydrogen
ROM is made in a way, so, u will only be able to flash using OFFICIAL TWRP RECOVERY, NOT with nijel8's recovery!!!
Download the ROM
Copy the ROM in SD card.
Flash latest Official TWRP recovery
Go to your recovery
Wipe Data (Clean flash)
Format /system
Format /cache
Flash miui global 8.5.x firmware
Reboot to recovery again (sometimes, after formatting /system, u can't flash ROM, without rebooting into recovery)
Install ROM zip.
(U can use opengapps' nano/pico)
Reboot - 1st boot takes around 10 minutes.
Use your phone wisely.
CLICK_HERE_TO_DOWNLOAD_Official_TWRP_Recovery.img
CLICK_HERE_TO_DOWNLOAD_DU-OS_ROM.zip
Known Bugs:
Including VoLTE
Everything is now working !!!
Because the ROM is made with the ROM+Kernel and Vendor-blobs of dungphp and rohan
#
I, being like OEM, managed to made it for hydrogen.
Look, OEM always make everything working but buggy roms!!
developers, check this to get VoLTE on ur roms
Kernel Source code:
XDA:DevDB Information
[ROM] [8.0] [VoLTE] DU-OS - unofficial, ROM for the Xiaomi Mi Max
Contributors
afridi.shahriar, dUngphP, rOhan purOhIt
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: OFFICIAL TWRP Recovery
Version Information
Status: Beta
Beta Release Date: 2018-01-01
Created 2018-01-01
Last Updated 2018-01-12
In XDA, 3rd January, 2018
A DECLARATION
BY THE OURC (ORIGINAL UNOFFICIAL ROM COMPILERs) of the
DUOS:WW:12.0.A,
In 18.01.01-ROW:AS
[*]||||||||||||||||||||||||||||||||||||||||||||||||||
DON'T USE NIJEL9'S recovery.
USE OFFICIAL TWRP. OTHERWISE IT MAY NOT FLASH.OK?
this ROM is fully tested, though, some recovery can't flash it properly, so, some bootloops may happen!!!!
Tested to work with official twrp recovery.
FOR ANY QUERIES, JUST WHATSAPP/SMS/CALL/FB ME ON +91-9476333678.
OK?
LIKE, IF U FIND ANY ERROR WHILE FLASHING
Reserved
Thanks for sharing bro Exactly!
Which gapps is recommended?
Opengapss 8.0 not working..neither patched gapps from dungphp..twrp said my phone still 7.1.2 sdk25 even the ROM is flashed
raymondsanusi said:
Which gapps is recommended?
Click to expand...
Click to collapse
Dev said that gapps included
http43 said:
Dev said that gapps included
Click to expand...
Click to collapse
Excluded means not included right?
JulianJenner said:
Can/Will you create HELIUM version?
Update: SORRY, I see now:
Update2:
It mean dirty flash to early ROM?
---------- Post added at 11:56 PM ---------- Previous post was at 11:17 PM ----------
I've followed your instruction on my Helium.
I was on MIUI China 7.12.28 Dev
I went to TWRP recovery
I made Wipe Data
Installed your ROM.zip
Reboot.
I've seen orange MI logo
After 1 minute phone rebooted to Fastboot mode.
What is my fault? May Android 7 based MIUI ROM?
After I've tried other way.
I've installed Your Lineage ROM.
It booted successfully.
I went to TWRP recovery
I made Wipe Data
Installed your Du-OS ROM.zip
Reboot.
I've seen orange MI logo
Lineage booted, but it got bootloop.
Ok. I give up.
Click to expand...
Click to collapse
Are u from united kingdom? And, called me from +4411570****0?
This thread is only for DU-OS-OREO 8.X, OK?
So, first forget about my LineageOS pre alpha/NitrogenOS, OKAY?
# flash official latest twrp recovery
# flash miui global 8.5.x firmware at least.
# wipe /data, /cache, /system.
# flash my "du-os" ROM. (GAPPS ARE NOT INCLUDED)
# u can flash pico/nano gapps from opengapps for arm64, 8.0
# reboot to system
##### I personally used this ROM , OK? Just sharing it, so, its working surely on HYDROGEN.
##### I don't know about helium, probably it will work!!
afridi.shahriar said:
Are u from united kingdom? And, called me from +4411570****0?
This thread is only for DU-OS-OREO 8.X, OK?
So, first forget about my LineageOS pre alpha/NitrogenOS, OKAY?
# flash official latest twrp recovery
# flash miui global 8.5.x firmware at least.
# wipe /data, /cache, /system.
# flash my "du-os" ROM. (GAPPS ARE NOT INCLUDED)
# u can flash pico/nano gapps from opengapps for arm64, 8.0
# reboot to system
##### I personally used this ROM , OK? Just sharing it, so, its working surely on HYDROGEN.
##### I don't know about helium, probably it will work!!
Click to expand...
Click to collapse
I use opengapps but not working..it said my android still 7.1.2 sdk25..after I flashed the rom then I flashed gapps
afridi.shahriar said:
Are u from united kingdom? And, called me from +4411570****0?
Click to expand...
Click to collapse
No. I am -unfortunately- not British.
小米Max全网通版3GB/64GB银色MIUI9中国开发者7.12.28
raymondsanusi said:
Opengapss 8.0 not working..neither patched gapps from dungphp..twrp said my phone still 7.1.2 sdk25 even the ROM is flashed
Click to expand...
Click to collapse
Is ur phone working without gapps??
I used both nano gapps from opengapps, without any patches.
I also used 2/3 mods with this ROM. Still worked.
If, after flashing ur ROM is not booting= problem is in ur recovery.
Use official twrp latest recovery.
## I tested on hydrogen only.
afridi.shahriar said:
Is ur phone working without gapps??
I used both nano gapps from opengapps, without any patches.
I also used 2/3 mods with this ROM. Still worked.
If, after flashing ur ROM is not booting= problem is in ur recovery.
Use official twrp latest recovery.
## I tested on hydrogen only.
Click to expand...
Click to collapse
I decided to restore my backup..so I didn't test my without gapps..but the rom flashed successfuly..I'm using latest recovery from nijel.
Maybe I'll try again later
@afridi.shahriar, can you please post some screenshots, also with VoLTE?
Thanks
Link firmware 8.5.x
I just found 9.1.2.x
https://androidfilehost.com/?fid=962021903579499563
小米Max全网通版3GB/64GB银色MIUI9中国开发者7.12.28
how can I find miui global 8.5.x firmware ?
---------- Post added at 04:53 PM ---------- Previous post was at 04:50 PM ----------
JulianJenner said:
I just found 9.1.2.x
https://androidfilehost.com/?fid=962021903579499563
小米Max全网通版3GB/64GB银色MIUI9中国开发者7.12.28
Click to expand...
Click to collapse
I found hydrogen 9.1.1.0 version on nigel8's androidfilehost page
raymondsanusi said:
I use opengapps but not working..it said my android still 7.1.2 sdk25..after I flashed the rom then I flashed gapps
Click to expand...
Click to collapse
Then, ur recovery couldn't Flash the ROM, OK?
After it showed 7.1, u had to check whether it booted or not.
Use only official recovery
paarkhi said:
@afridi.shahriar, can you please post some screenshots, also with VoLTE?
Thanks
Click to expand...
Click to collapse
Don't u think, I'm giving the ROM is enough?
When, we don't have more than 1/2 volte roms (Oreo).
So, users plz upload as, don't bother me.
madmax59 said:
how can I find miui global 8.5.x firmware ?
---------- Post added at 04:53 PM ---------- Previous post was at 04:50 PM ----------
I found hydrogen 9.1.1.0 version on nigel8's androidfilehost page
Click to expand...
Click to collapse
OK I try again...
Code:
**** Disclaimer: I'm not responsible if you destroy your device. Use at your own risk!!! ****
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Android Open Source illusion Project
About us:
AOSiP stands for Android Open Source illusion Project. We are an AOSP based custom ROM, twisted with the latest features from all over the Android development community. Quality and stability is our first priority as we are dedicated to bringing you the best Android has to offer. AOSIP is a quality custom rom based purely on Google AOSP source since 6.0 release. Twisted with the latest features and blended with stability. We strive for perfection and it shows.
DOWNLOADS :
ROM - GDRIVE
TWRP - GDRIVE
FLASHABLE VBMETA - GDRIVE
MOUNT SYSTEM ZIP - GDRIVE
GAPPS - OFFICIAL LINK
MAGISK - OFFICIAL LINK
INSTRUCTIONS :
- Must have unlocked bootloader
- Download all files
- Flash TWRP (via fastboot "fastboot flash recovery recovery.img" on terminal)
- Boot into TWRP and format DATA then reboot to recovery
- Wipe Data, System, Cache, Dalvik Cache, and then mount all
- Flash the ROM ZIP
- Flash MountSystem.zip
- Flash Magisk
- Flash VBMETA.zip
- Reboot
- Back to recovery
- Flash Gapps (Optional)
- Voila
VIDEO TUTORIAL by Techni Roy :
- https://youtu.be/0Mfz2-pgmFw
ISSUES
- You tell
Safetynet Patch :
- GDRIVE
Thanks to the wonderfull Chinese dev <3
- Heyuhui
Special Thanks
- Gusion
- Clythe Fawkes
- LavenderDownloads
- letsmakecakes
- Shobhit_07
ROM OS Version : 9.x Pie
ROM Kernel : Linux 4.x
BASE ON : AOSP
Version Information
Status : Test
Released Date : 05-01-2019
Yeay yeay another ROM! Have you included the original MIUI Camera? I realized that in AOSP ROM's the camera quality is not as good as the MIUI ones. This is why I'm wondering.
Everyone loves pizza ?
holygeek said:
Yeay yeay another ROM! Have you included the original MIUI Camera? I realized that in AOSP ROM's the camera quality is not as good as the MIUI ones. This is why I'm wondering.
Click to expand...
Click to collapse
Just install the GCAM ^_^
zhad0ws said:
Everyone loves pizza
Click to expand...
Click to collapse
Yup :highfive:
Yeah, another rom! Thank you very much!
GinNig said:
Yeah, another rom! Thank you very much!
Click to expand...
Click to collapse
Just sharing
- Flash MountSystem.zip
- Flash Magisk
- Flash VBMETA.zip
For those who don't know how to install GCam, I'm posting:
First go to Magisk and flash the zip file from Modules menu, then reboot and install the apk file. Link below takes you to the apk file and the zip file is attached to this post.
https://f.celsoazevedo.com/file/gcamera/GCam_6.1.021_N7P_test2.6.apk
holygeek said:
For those who don't know how to install GCam, I'm posting:
First go to Magisk and flash the zip file from Modules menu, then reboot and install the apk file. Link below takes you to the apk file and the zip file is attached to this post.
https://f.celsoazevedo.com/file/gcamera/GCam_6.1.021_N7P_test2.6.apk
Click to expand...
Click to collapse
What for API Flash With magsik ?
Is it enabled With Note 7.
Install the apk., Thats enough and the Same Result.
You can Check it With the API Test App.
Gesendet von meinem Redmi Note 7 mit Tapatalk
Thank you very much for your work / share it. The minimum brightness is quite high, otherwise, very fluid!!
MIUI Camera For Redmi Note 7
Please port the stock miui camera i really miss the depth effect created by the secondary depth sensor. And if we cant use the secondary sensor the there is no use dual camera modules.
Thankyou hope the devs will look into this, Anyways love you devs.
Critical bug:spontaneous reboot approximately every 2 hours
Not critical: In the whatsapp app, the camera does not open for photographing the qr code for the web version: cant start camera please reboot you phone.
Also aosip updater cant work
Please fix this bugs, tnx
Can you please tell me there will be an update soon? I can not normally use the firmware due to constant reboots and I need to understand to wait for updates or flashing another firmware?
Aosip Pizza?
Why not Aosip Pie?
Just wonder?
---------- Post added at 08:59 AM ---------- Previous post was at 08:53 AM ----------
One more question...
For install twrp on Redmi Note 5 twrp must be installed from twrp before reboot.
I do not see this note in installation quide for Redmi Note 7.
Is this mean that this step is not required?
hello Friend, Crahm06,[ROM][Unofficial][9.0.0][lavender] LineageOS 16.0 By thelazyindian is More stable than other ROMs for lavender,I flash this rom one weeks ago, can not find any issuse, I thiink maybe you could work together on lavender and in the future Android Q
https://github.com/thelazyindian/android_device_xiaomi_lavender
https://github.com/thelazyindian/kernel_xiaomi_lavender
https://github.com/thelazyindian/vendor_xiaomi
Beautiful rom and an excellent explanation to install it
Hey can someone share the bootanimation?
I want to change mines
When and how to install SafetyPatch?
---------- Post added at 12:00 PM ---------- Previous post was at 11:24 AM ----------
I cannot instal twrp.
Can someone halp me pls.
I install twrp but phone always reboot on fastboot or miui
xdatin1 said:
When and how to install SafetyPatch?
---------- Post added at 12:00 PM ---------- Previous post was at 11:24 AM ----------
I cannot instal twrp.
Can someone halp me pls.
I install twrp but phone always reboot on fastboot or miui
Click to expand...
Click to collapse
Try directly reboot to twrp after you flash it via adb by pressing power+vol up.
TeamHorizon's XenonHD rom for Xiaomi Mi Max 2 (Oxygen)
XenonHD
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flashing Instructions:
Code:
1. Install latest custom Recovery such as TWRP
2. Flash the latest firmware
3. Copy the downloaded ROM to your phone.
4. Boot into your recovery
5. Back up your ROM
6. Enter recovery
7. Make a full wipe (system, data, cache, dalvik)
8. Install the ROM
9. Install GAPPS package
10. Reboot - the first boot can take up to 5 minutes
old rom Download
Download
Gapps
Working
VoLTE
Audio
WiFi
Bluetooth
Mobile Data
IR
FM Radio
LED Notification
in-call volume
Unofficial XenonHD 8.1 ROM by Snekkill, for the Xiaomi Mi Max 2 (Oxygen)
Special Thanks Too:
TeamHorizon
ashwin007
Iscle
Destroyer71
ROM OS Version: 8.1.0 Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: Unlocked BL, Recovery
Based On: LineageOS
Version Information
Status: Stable
Thanks Buttons Is The Simplest Way To Show You Appreciate, So Keep Thanking.
Like my work Buy Me Beer
PayPal
https://www.paypal.me/sanekcreed
https://money.yandex.ru/to/410018276504445
Join Us On Telegram
https://t.me/MiMax2forpda
XDA:DevDB Information
XenonHD(8.1.0), ROM for the Xiaomi Mi Max 2
Contributors
snekkill, Ashwin007
Source Code: https://github.com/TeamHorizon
Device tree: https://github.com/Sanek-creed/device_xiaomi_oxygen_oreo
Vendor tree: https://github.com/Sanek-creed/Xiaomi_oxygen_vendor_oreo
Kernel Source Code: https://github.com/ashwinr64/android_kernel_xiaomi_oxygen/tree/lineage-15.1
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 23.10.2019
Stable Release Date: 2019-10-23
Current Beta Version: 17.10.2019
Created 2019-10-23
Last Updated 2019-12-25
FM radio and IR working friend, best Oreo for Mi Max 2, Thank you.
Now Havoc working too please
NXPT said:
FM radio and IR working friend, best Oreo for Mi Max 2, Thank you.
Now Havoc working too please
Click to expand...
Click to collapse
I would appreciate havoc too!!!???
17.10.19 to 23.10.19 can be dirty flashed?
Quick charge and dt2w? Thanks
---------- Post added at 07:41 PM ---------- Previous post was at 07:31 PM ----------
Enviado desde mi MI MAX 2 mediante Tapatalk
Share your device sources
Any idea, can this ROM be flashed using OrangeFox? Thanks!
zburli said:
Any idea, can this ROM be flashed using OrangeFox? Thanks!
Click to expand...
Click to collapse
Yes
Nais work bro. Finally HR Kernel?
Thank you all that u lead the development of max 2 for coming back and give us again a proper rom ?? only one question why not pie?
@snekkill
Thanks for your work!
I wonder if quick charge is working on this rom fro Oxygen, since in other roms is known that it does not work.. appreciated.
crismar2 said:
Quick charge and dt2w? Thanks
---------- Post added at 07:41 PM ---------- Previous post was at 07:31 PM ----------
Enviado desde mi MI MAX 2 mediante Tapatalk
Click to expand...
Click to collapse
both works well. For QC just plug your charger and reboot phone and don't touch after reboot. QC will work.
---------- Post added at 01:53 AM ---------- Previous post was at 01:52 AM ----------
->/dev/null said:
Nais work bro. Finally HR Kernel?
Click to expand...
Click to collapse
Why?
---------- Post added at 01:54 AM ---------- Previous post was at 01:53 AM ----------
m1n15s said:
Thank you all that u lead the development of max 2 for coming back and give us again a proper rom ?? only one question why not pie?
Click to expand...
Click to collapse
Work in progress for Pie also...
---------- Post added at 01:55 AM ---------- Previous post was at 01:54 AM ----------
andrew.mackew said:
@snekkill
Thanks for your work!
I wonder if quick charge is working on this rom fro Oxygen, since in other roms is known that it does not work.. appreciated.
Click to expand...
Click to collapse
Yes working... see above how to get activate
Decryption unsuccessful reset your phone? I don't even have a password. Any solution?
Sagar3834 said:
Decryption unsuccessful reset your phone? I don't even have a password. Any solution?
Click to expand...
Click to collapse
Need format Data.
---------- Post added at 09:25 AM ---------- Previous post was at 09:21 AM ----------
How to enable hardware buttons?
I can´t add any ringtone, notification sound, alarm... The phone is mute
After formating data whole internal storage formatted everything works ROM boots , needed high in call volume ..thanks awesome rom
I tried everything I changed my recovery. I wiped internal too including data as you said! But still when rom boot it asked for the password and asked me to factory data reset and again it was booting itself. Can anyone help me please? I tried twrp I tried orange fox. I wiped everything nothing helps
Sagar3834 said:
I tried everything I changed my recovery. I wiped internal too including data as you said! But still when rom boot it asked for the password and asked me to factory data reset and again it was booting itself. Can anyone help me please? I tried twrp I tried orange fox. I wiped everything nothing helps
Click to expand...
Click to collapse
Wiping doesn't work u need to goto manage partitions ,format data
faraaz3 said:
Wiping doesn't work u need to goto manage partitions ,format data
Click to expand...
Click to collapse
Thanks I'll try this!
Will magisk be lost?