Hello everybody!
The latest firmware version NASH_SPRINT_8.0.0_OCXS27.109_48_17.
Download links: https://mega.nz/#!j1dmgKgZ!KVrCg9k5cEaLxeS05kOnrVqT6yYRmLOZfeyA32AtCTE
I present to your attention the factory firmware NASH_SPRINT_OCX27.109-48_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml for the Moto Z2 Force XT1789-03 Sprint with the executive bat file for installation.
Download links:
Factory Image https://mega.nz/#!X0FGhDxL!tsO6r3Pxa7tEVWU8Iss8fQ5gLnI9KjyPLkEpA_bz1uM
.bat https://mega.nz/#!KsMQWRKZ!O-uyGz5mUSAoLz-esS6cgbVPqnMuIzrBgsbqnisl1MM
Good luck to all! :highfive:
I have nogout sprint version..its a kit device
can kit device can be upgraded to oreo ? plz guide .. will I be have any problem with oreo update?
mshadabalam said:
its a kit device
Click to expand...
Click to collapse
What means kit device? This is the factory firmware for Moto Z2 Force XT1789-03 Sprint. If the phone is Sprint, then naturally you can safely install this firmware.
ilia3367 said:
What means kit device? This is the factory firmware for Moto Z2 Force XT1789-03 Sprint. If the phone is Sprint, then naturally you can safely install this firmware.
Click to expand...
Click to collapse
Is this compatible with this version in the SS? Or do you have the version that would work or could you point me in the right direction? Tia
ilia3367 said:
Hello everybody! I present to your attention the factory firmware NASH_SPRINT_OCX27.109-48_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml for the Moto Z2 Force XT1789-03 Sprint with the executive bat file for installation.
Download links:
Factory Image https://mega.nz/#!X0FGhDxL!tsO6r3Pxa7tEVWU8Iss8fQ5gLnI9KjyPLkEpA_bz1uM
.bat https://mega.nz/#!KsMQWRKZ!O-uyGz5mUSAoLz-esS6cgbVPqnMuIzrBgsbqnisl1MM
Good luck to all! :highfive:
Click to expand...
Click to collapse
Can you provide files needed for z2 force sprint conversion to dual sim ???
zeeshan.siddique4779 said:
Can you provide files needed for z2 force sprint conversion to dual sim ???
Click to expand...
Click to collapse
I did not do Dual SIM cards on Android Oreo. It's left from Android 7.
ilia3367 said:
I did not do Dual SIM cards on Android Oreo. It's left from Android 7.
Click to expand...
Click to collapse
i have done dual sim on 7.1.1 can you now help how to upgrade to 8.0 without loosing dual sim mod
zeeshan.siddique4779 said:
i have done dual sim on 7.1.1 can you now help how to upgrade to 8.0 without loosing dual sim mod
Click to expand...
Click to collapse
Dual SIM still you will have even after upgrading to Oreo.
ilia3367 said:
Dual SIM still you will have even after upgrading to Oreo.
Click to expand...
Click to collapse
I dont think so , when i will flash oreo rom it will flash orignal sprit modem files then it will again become single sim as per my knowledge . But i am not sure what lines to skip from flash script to flash oreo .
zeeshan.siddique4779 You don't need to skip anything when flashing. The firmware will not affect these sections of the system.
At least I had that when using this method to activate Dual SIM mode http://4pda.ru/forum/index.php?showtopic=885689&view=findpost&p=69776735
ilia3367 said:
zeeshan.siddique4779 You don't need to skip anything when flashing. The firmware will not affect these sections of the system.
At least I had that when using this method to activate Dual SIM mode http://4pda.ru/forum/index.php?showtopic=885689&view=findpost&p=69776735
Click to expand...
Click to collapse
Can you upload the "dualsim.zip"
devilyuan said:
Can you upload the "dualsim.zip"
Click to expand...
Click to collapse
No problem, you're welcome! https://mega.nz/#!KpUx1YoY!iJidPmXBJUMe9xvZ0-qQoeDYl_QMYsC1AEOFrC9wEXA
ilia3367 said:
No problem, you're welcome! https://mega.nz/#!KpUx1YoY!iJidPmXBJUMe9xvZ0-qQoeDYl_QMYsC1AEOFrC9wEXA
Click to expand...
Click to collapse
Thank you very much!
ilia3367 said:
zeeshan.siddique4779 You don't need to skip anything when flashing. The firmware will not affect these sections of the system.
At least I had that when using this method to activate Dual SIM mode http://4pda.ru/forum/index.php?showtopic=885689&view=findpost&p=69776735
Click to expand...
Click to collapse
I wish I could know Russian. Any instructions in English? Thanks!
TopGun2000 said:
I wish I could know Russian. Any instructions in English? Thanks!
Click to expand...
Click to collapse
This technique is designed to activate the Dual SIM mode for Sprint phones. IMEI SIM 2 = 0 As a basis for the preparation of the tool of this method was taken instructions from a third-party forum, written by wizardik For which he thank you in particular!
Perhaps it will suit T-Mobile phones. Owners of this modification of the phone, wishing to apply this method, write in a personal.
I apologize in advance that this method has turned out not so concise and fast, but in principle there is nothing complicated in it. To begin with, carefully and thoughtfully read the sequence of actions.
Be careful! For your mistakes you answer yourself.
Attention! If you want to upgrade to Android 8.0, be sure to restore the backup partition of the hw partition first.
#
Prerequisites
This method is designed for firmware on Android 7.1.1 . On the phone, the bootloader must be unlocked and the custom recovery TWRP installed, Root rights received.
#
Installation
1. Download the attached archive Attached fileDual_SIM.zip (46,52 MB)
and copy from it to the phone:
- Utility folder to the root of external or internal memory;
- folder 2018-01-29--00-00-00 in the folder where you have backup TWRP.
2. We reboot the phone in the boot loader mode, and from it into TWRP.
3. Create a full backup (Backup); all sections of the system!
4. Go to the Installation tab , navigate the explorer to the Utility folder . In the lower right corner, click the Install Img button and select the image TWRP_3.2.0_DS.img In the window that opens, select the partition to flash the image -Boot and execute the svayp for the firmware.
5. After the firmware is finished, go to the Main Menu -> Restart and reboot again in the Recovery .
6. Select the Backup tab, and select only one hw section . Save this backup to your computer. If something goes wrong, you can always restore and work the connection, and IMEI.
7. Next, select the Restore tab, select the copied backup 2018-01-29--00-00-00 , the partition for the recovery of hw and perform the recovery copy.
8. Again go to the Installation tab, navigate the Explorer to the Utility folder . In the lower right corner, click the Install Img button and select the image TWRP_3.2.img In the window that opens, select the partition for flashing the image - Boot and execute the svayp for the firmware.
9. When the firmware is finished, go to the Main Menu -> Restart and reboot again in the Recovery .
10. Select the Restore tab , select the backup you created , all partitions, and perform the recovery copy.
11. After the restore is complete, we reboot into the system.
#
Screenshots
Decreased by 81%
Attached Image
1440 x 2560 (111.21 KB)
Decreased by 81%
Attached Image
1440 x 2560 (163.55 KB)
Decreased by 81%
Attached Image
1440 x 2560 (154.84 KB)
Decreased by 81%
Attached Image
1440 x 2560 (127.4 KB)
ilia3367 said:
zeeshan.siddique4779 You don't need to skip anything when flashing. The firmware will not affect these sections of the system.
At least I had that when using this method to activate Dual SIM mode http://4pda.ru/forum/index.php?showtopic=885689&view=findpost&p=69776735
Click to expand...
Click to collapse
Hello i dont have account of 4pda , the link you sent above have a file in its attachment can you give me link from mega or google drive ?
---------- Post added at 07:16 PM ---------- Previous post was at 07:08 PM ----------
ilia3367 said:
No problem, you're welcome! https://mega.nz/#!KpUx1YoY!iJidPmXBJUMe9xvZ0-qQoeDYl_QMYsC1AEOFrC9wEXA
Click to expand...
Click to collapse
Thank you very much .
doctorman said:
This technique is designed to activate the Dual SIM mode for Sprint phones. IMEI SIM 2 = 0 As a basis for the preparation of the tool of this method was taken instructions from a third-party forum, written by wizardik For which he thank you in particular!
Perhaps it will suit T-Mobile phones. Owners of this modification of the phone, wishing to apply this method, write in a personal.
I apologize in advance that this method has turned out not so concise and fast, but in principle there is nothing complicated in it. To begin with, carefully and thoughtfully read the sequence of actions.
Be careful! For your mistakes you answer yourself.
Attention! If you want to upgrade to Android 8.0, be sure to restore the backup partition of the hw partition first.
#
Prerequisites
This method is designed for firmware on Android 7.1.1 . On the phone, the bootloader must be unlocked and the custom recovery TWRP installed, Root rights received.
#
Installation
1. Download the attached archive Attached fileDual_SIM.zip (46,52 MB)
and copy from it to the phone:
- Utility folder to the root of external or internal memory;
- folder 2018-01-29--00-00-00 in the folder where you have backup TWRP.
2. We reboot the phone in the boot loader mode, and from it into TWRP.
3. Create a full backup (Backup); all sections of the system!
4. Go to the Installation tab , navigate the explorer to the Utility folder . In the lower right corner, click the Install Img button and select the image TWRP_3.2.0_DS.img In the window that opens, select the partition to flash the image -Boot and execute the svayp for the firmware.
5. After the firmware is finished, go to the Main Menu -> Restart and reboot again in the Recovery .
6. Select the Backup tab, and select only one hw section . Save this backup to your computer. If something goes wrong, you can always restore and work the connection, and IMEI.
7. Next, select the Restore tab, select the copied backup 2018-01-29--00-00-00 , the partition for the recovery of hw and perform the recovery copy.
8. Again go to the Installation tab, navigate the Explorer to the Utility folder . In the lower right corner, click the Install Img button and select the image TWRP_3.2.img In the window that opens, select the partition for flashing the image - Boot and execute the svayp for the firmware.
9. When the firmware is finished, go to the Main Menu -> Restart and reboot again in the Recovery .
10. Select the Restore tab , select the backup you created , all partitions, and perform the recovery copy.
11. After the restore is complete, we reboot into the system.
#
Screenshots
Decreased by 81%
Attached Image
1440 x 2560 (111.21 KB)
Decreased by 81%
Attached Image
1440 x 2560 (163.55 KB)
Decreased by 81%
Attached Image
1440 x 2560 (154.84 KB)
Decreased by 81%
Attached Image
1440 x 2560 (127.4 KB)
Click to expand...
Click to collapse
Appreciated it.
Phone is 100% Sprint but its unlocked to use other network.
ilia3367 said:
What means kit device? This is the factory firmware for Moto Z2 Force XT1789-03 Sprint. If the phone is Sprint, then naturally you can safely install this firmware.
Click to expand...
Click to collapse
.
I live in Pakistan and i am using sprint moto z2 force which is unlocked for other network like Telenor, Mobilink, Zong etc .. So my question is, if i upgrade my mobile to oreo, will other network work? and which version is better? oreo 8.0 from stock or oreo 8.1 form lineage ?
mshadabalam said:
.
I live in Pakistan and i am using sprint moto z2 force which is unlocked for other network like Telenor, Mobilink, Zong etc .. So my question is, if i upgrade my mobile to oreo, will other network work? and which version is better? oreo 8.0 from stock or oreo 8.1 form lineage ?
Click to expand...
Click to collapse
hey I think it works because I flashed many motorola 2017 to 2018 sprint models and not having any issues with relocking the network.
if you have doubt about network issues so try to flashing it without non-hlos,fsg, erasing modemst1 and modemst2 leave those partitions and flash other all partitions.
Sorry for my ignorance but i have a question. What would happend if i install this update in my at&t moto z2 force? It would work?
Related
TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
Team Win was originally formed to work on porting WiMAX to CM7 for the HTC EVO 4G. After our work on the EVO 4G we wanted to work on a project that would work on more devices than just the EVO 4G and we settled on working on a recovery. Today TWRP is the leading custom recovery for Android phones.
A custom recovery is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom "ROM" like OmniROM
Click to expand...
Click to collapse
WARNING!!! Be careful what you do here. One mistake and the device is soft-bricked. I take no responsibility for bricked devices, lost warranty or even OTAs not working!! Booting and/or flashing files from this post is on your own risk.
Requirements
Unlocked bootloader
Yoga Tablet 3 Plus with and without LTE (YT-X703L and YT-X703F) are supported
Known Issues
WARNING! Our device uses dm-verity (verified boot). The system partition should remain read-only. Otherwise a bootloop will occur. You can flash my modified kernel or SuperSU to resolve this but OTA's are no longer possible! You have to restore a factory image or clean system backup to receive OTAs
Potentially DRM keys are lost! Pure unlocking and rooting does not cause the issue. However, there have been reports of lost DRM keys by some unknown action. It is advised to act with caution. Losing your DRM keys can lead to issues with some apps which use DRM which could then have limited or no functionality. E.g. Netflix will only stream in SD (480p). You can check with DRM info if you still have L1 security level which means DRM keys are intact.
Download
Official TWRP for YT-X703F (Wifi): twrp.me
Official TWRP for YT-X703L (LTE): twrp.me
Instructions
Install fastboot and adb on your PC, e.g. from here
Enable developer options and in there select to unlock your bootloader by enabling OEM unlock and enable USB debugging
Connect your PC to your tablet and run
Code:
adb reboot bootloader
using adb on command line. The tablet will reboot into bootloader mode where you will only see the Lenovo logo. Now you use
Code:
fastboot oem unlock-go
to unlock. This will factory reset your device
Setup the tablet again and reboot again to the bootloader
Then run
Code:
fastboot boot twrp-3.2.1-0-yt_x703f.img
to temporarily boot into TWRP. You can also flash if you are sure
Select to keep system read only when TWRP starts to avoid modification which will make OTAs impossible
Optionally flash SuperSU or Magisk in TWRP which should install system less. Keep OEM unlock enabled if you flash or modify anything
Additional Downloads
Backup of original boot, recovery and system image for YT-X703F S000936: MEGA
Modified Boot image with forceencrypt disabled and it switches off CABC fully. You need to factory reset after flashing to format data without encryption boot_yt_x703f_s000963_noforceencrypt_cabc.img (YT-X703F S000963) / boot_yt_x703l_s000963_noforceencrypt_cabc.img (YT-X703L S000963) . Use
Code:
fastboot flash boot boot_yt_x703f_s000963_noforceencrypt_cabc.img
to flash the kernel in fastboot. SuperSU or Magisk should be flashed afterwards if root is desired.
Full factory images with flash tool and instructions YT_X703F_S000689, YT_X703L_S000704, YT_X703F_S000725, YT_X703L_S000725, YT_X703F_S000734, YT_X703L_S000734, YT_X703L_S000744, YT-X703F_S000744, YT-X703L_S000963, YT-X703F_S000963 and OTA updates: MEGA (These images contain the individual boot, recovery and system images that you need to restore from any modification mentioned above)
System Updates (OTA)
In order to successfully apply Lenovo system updates after root you have to restore the original boot, recovery (if you flashed TWRP) and system partitions from your current installed version (e.g. S000744) for your variant of the tablet. This will NOT delete your apps and data but will unroot. Note that OTAs are block based and always check the contents of most of the partitions. This means that all of these partitions (except your data) have to be original and have to be on the exact same version (e.g. S000734) for the update to succeed.
See here for instructions how to restore the partitions with fastboot.
Credits
@pogo1975 - for providing the factory images and fixing the AV sync issue
@launcher20 and @deecept - for testing the LTE version
TeamWin
Changelog
v4:
Now official TWRP with version 3.0.3-0
v3:
enable full disk encryption for access to the encrypted data partition
update TWRP kernel to latest S000725 version
v2:
add support for LTE variant (YT-X703L)
add further mount points to be able to backup more data
Thanks buddy! You are an absolute champion! Tell me what you need me to do and I'll do it before rooting and up load what you need.
Doing good work here.
Who wants to bet on a race between matshias and Lenovo support for who can fix the issues with this device first?
That's great and fast, I'm thinking tab 3 plus is getting hot now.
Great to see there is something moving for the yoga now. You think it will support the lte Version anytime? Or maybee even lineageos?
so you know, i've managed to install xposed thanks to this thread https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268 and is working well.
wayney said:
Thanks buddy! You are an absolute champion! Tell me what you need me to do and I'll do it before rooting and up load what you need.
Click to expand...
Click to collapse
Well if you haven't modified anything yet then it'd be great if you can boot into TWRP with system read only and then connect via ADB to the tablet with a big SD card inserted which has enough free space (4 GB).
The run the following command
Code:
dd if=/dev/block/bootdevice/by-name/system of=/sdcard1/system.img
This will take a while. Then copy the file system.img from your SD card to a PC and zip it (or 7z, rar). Then upload it
Gogoho said:
Great to see there is something moving for the yoga now. You think it will support the lte Version anytime? Or maybee even lineageos?
Click to expand...
Click to collapse
The LTE variant is probably very similar and it wouldn't be much work. But I don't own the device, so I would need some help. So someone with the LTE variant who is not afraid to experiment with fastboot and adb and who can provide me with the details needed I am happy to compile a TWRP for it.
LineageOS is much much more work than TWRP. For an experienced cyanogenmod/LineageOS dev it is not much of a thing and would take only a few days, especially since it is a Qualcomm device and there are already ports for devices with SD 652. But for me this is new as well so it'll take much longer. As soon as I have time I'll look into it.
matshias said:
Well if you haven't modified anything yet then it'd be great if you can boot into TWRP with system read only and then connect via ADB to the tablet with a big SD card inserted which has enough free space (4 GB).
The run the following command
Code:
dd if=/dev/block/bootdevice/by-name/system of=/sdcard1/system.img
This will take a while. Then copy the file system.img from your SD card to a PC and zip it (or 7z, rar). Then upload it
Click to expand...
Click to collapse
You forgot to tell me to go to adb shell :silly:
DD is currently doing a dump, non interactive so I hope it is still alive, it has been close to 1 hour so far. I will upload the clean image once it is done and await further instructions from you. :good:
I'm in Perth, Western Australia (UTC +8:00), so we might be playing timezone tag.
wayney said:
You forgot to tell me to go to adb shell :silly:
DD is currently doing a dump, non interactive so I hope it is still alive, it has been close to 1 hour so far. I will upload the clean image once it is done and await further instructions from you. :good:
I'm in Perth, Western Australia (UTC +8:00), so we might be playing timezone tag.
Click to expand...
Click to collapse
I think I forgot one more thing. The external SD card needs to be mounted in the TWRP menu. I believe it's not mounted automatically. So the DD command does nothing. It shouldn't take that long. Sorry about that!
It's UTC +1:00 here in Germany
matshias said:
Well if you haven't modified anything yet then it'd be great if you can boot into TWRP with system read only and then connect via ADB to the tablet with a big SD card inserted which has enough free space (4 GB).
The run the following command
Code:
dd if=/dev/block/bootdevice/by-name/system of=/sdcard1/system.img
This will take a while. Then copy the file system.img from your SD card to a PC and zip it (or 7z, rar). Then upload it
Click to expand...
Click to collapse
matshias said:
I think I forgot one more thing. The external SD card needs to be mounted in the TWRP menu. I believe it's not mounted automatically. So the DD command does nothing. It shouldn't take that long. Sorry about that!
It's UTC +1:00 here in Germany
Click to expand...
Click to collapse
I was wondering why nothing was happening after 3 hours.
I have rared it and it is uploading at the moment, it is going to take 5 hours.
wayney said:
I was wondering why nothing was happening after 3 hours.
I have rared it and it is uploading at the moment, it is going to take 5 hours.
Click to expand...
Click to collapse
Wow ok. Well thanks a lot for your efforts. This will not just help me but anyone with modified system partition to get OTAs.
Unmodified System Image
Here is the vanilla image via DD of the system partition.
Software Version : YT-X703F_160817
Android Version : 6.0.1
Security Patch Level : 1 September 2016
Kernel Version : 3.10.84-perf
Build Number : YT-X703F_S000689_161105_ROW
Tablet purchased retail from Australia.
https://mega.nz/#!bos0GIjI!vcO9dpSJX...Grjb7k3z6mjnqA
wayney said:
Here is the vanilla image via DD of the system partition.
Software Version : YT-X703F_160817
Android Version : 6.0.1
Security Patch Level : 1 September 2016
Kernel Version : 3.10.84-perf
Build Number : YT-X703F_S000689_161105_ROW
Tablet purchased retail from Australia.
https://mega.nz/#!bos0GIjI
Click to expand...
Click to collapse
Perfect!!
Can you send me the key for the download via PM or post it?
matshias said:
Perfect!!
Can you send me the key for the download via PM or post it?
Click to expand...
Click to collapse
Let's try that again.
https://mega.nz/#!bos0GIjI!vcO9dpSJXp6cKtdH07Kt0RSaqpqQ7Grjb7k3z6mjnqA
matshias said:
Wow ok. Well thanks a lot for your efforts. This will not just help me but anyone with modified system partition to get OTAs.
Click to expand...
Click to collapse
Thank you guys for spending times on it, it would be wonderful if Lenovo people do thing like this way, too.
In the depths of the Russian Internet i have found this
YT-X703F_USR_S000689_1611051146_Q00237_ROW.zip
https://drive.google.com/drive/folders/0B_jGuhC9WsNfYUZzZmhRY2NhQlU?usp=sharing
it is supose to be complete image to Wifi-Version.
I HAVE NOT FLASHED THIS YET. Do it on your risk.
pogo1975 said:
In the depths of the Russian Internet i have found this
YT-X703F_USR_S000689_1611051146_Q00237_ROW.zip
https://drive.google.com/drive/folders/0B_jGuhC9WsNfYUZzZmhRY2NhQlU?usp=sharing
it is supose to be complete image to Wifi-Version.
I HAVE NOT FLASHED THIS YET. Do it on your risk.
Click to expand...
Click to collapse
Hahaha got to love the dark corner of the Russian internets :laugh:
pogo1975 said:
In the depths of the Russian Internet i have found this
YT-X703F_USR_S000689_1611051146_Q00237_ROW.zip
https://drive.google.com/drive/folders/0B_jGuhC9WsNfYUZzZmhRY2NhQlU?usp=sharing
it is supose to be complete image to Wifi-Version.
I HAVE NOT FLASHED THIS YET. Do it on your risk.
Click to expand...
Click to collapse
If that's real it would have saved me a lot of time finding the loophole in the system to extract the boot and recovery image. But still a great find which will rescue some soft-bricked devices.
matshias said:
If that's real it would have saved me a lot of time finding the loophole in the system to extract the boot and recovery image. But still a great find which will rescue some soft-bricked devices.
Click to expand...
Click to collapse
so long as it's safe and not loaded with malware...
Twrp Backup Process Steps:
1. Download TWRP.7z
2. Unzip Twrp with 7zip program then make sure the pathway looks like this D:\TWRP\BACKUPS\LGMP26016c6f013\2016-12-31--20-18-59_NRD90U basically put it on the root of the sdcard or if you don't have one just connect phone in twrp mode by putting it on mtp and put it on the root of your internal storage and then go to restore in twrp
TWRP BACKUP Contains:
1. UI, Ringtones, Notification Sound Changes (Apple Sounds & Emojis iOS 10.2)
2. Boot Animation Is Google
3. Google Assistant Added As Well As The Pixel Launcher And Other Features
4. Removed Most Bloatware And Some Other Apps
6. For Those That Have That Message When You Download Supersu App And Says Root Not Detected or Something Like That Download These Two Files To Properly Install Root On It https://mega.nz/#!tYlyGQKS!F2UEnS-Sy1_Z16tbY20RZvIhU12r3tT2flc0HX6HZnY https://mega.nz/#!hY1hXKBa!DBDSmqNTE3FJBp1yiIqEAm9yv37f0B1vuzZEq4mYEhY
7. Install UPDATE-unSU-signed.zip first then reboot system to check if it boots normally after that just take the battery out put it back in and hold the power button and volume down and wait for the lg logo and release power button and hold it again and install SR5-SuperSU-v2.78-SR5-20161130091551.zip and then you have root!
5. Let Me Know What You Think I Wish I Could Have Made A ROM But I Need System.img
Details: When You Are Done Going Through The Setup Hold The Screen or Go To Settings To Change Launcher To Pixel & To See All The Emojis With The Color Support Download Gboard From The Play Store
Twrp Link: https://mega.nz/#!IEEHiTQJ!T__o91ZFLIY4X46ZBQMIDf41yPMxSwk4_wzJqwR0YxE
Will this work for the T-Mobile variant of the LG K20 Plus?
iiphanaticx said:
Will this work for the T-Mobile variant of the LG K20 Plus?
Click to expand...
Click to collapse
I Mean It Definitely Would Restore On Your Device However Your Data Connection Wouldn't Work Because It's A Metro Modem Flashed Instead Of T-Mobile
What kind of apps were removed? and can I go back to normal if I dont want this backup anymore? will it erase all my data?
my worthless T-mobile one refuses to enter recovery
wont work too vague
the 2nd step is too vague. Iam trying to follow step to but it isn't very specific. can you explain it with a little more detail. please
System image
TheAmbition215 said:
Twrp Backup Process Steps:
1. Download TWRP.7z
2. Unzip Twrp with 7zip program then make sure the pathway looks like this D:\TWRP\BACKUPS\LGMP26016c6f013\2016-12-31--20-18-59_NRD90U basically put it on the root of the sdcard or if you don't have one just connect phone in twrp mode by putting it on mtp and put it on the root of your internal storage and then go to restore in twrp
TWRP BACKUP Contains:
1. UI, Ringtones, Notification Sound Changes (Apple Sounds & Emojis iOS 10.2)
2. Boot Animation Is Google
3. Google Assistant Added As Well As The Pixel Launcher And Other Features
4. Removed Most Bloatware And Some Other Apps
6. For Those That Have That Message When You Download Supersu App And Says Root Not Detected or Something Like That Download These Two Files To Properly Install Root On It https://mega.nz/#!tYlyGQKS!F2UEnS-Sy1_Z16tbY20RZvIhU12r3tT2flc0HX6HZnY https://mega.nz/#!hY1hXKBa!DBDSmqNTE3FJBp1yiIqEAm9yv37f0B1vuzZEq4mYEhY
7. Install UPDATE-unSU-signed.zip first then reboot system to check if it boots normally after that just take the battery out put it back in and hold the power button and volume down and wait for the lg logo and release power button and hold it again and install SR5-SuperSU-v2.78-SR5-20161130091551.zip and then you have root!
5. Let Me Know What You Think I Wish I Could Have Made A ROM But I Need System.img
Details: When You Are Done Going Through The Setup Hold The Screen or Go To Settings To Change Launcher To Pixel & To See All The Emojis With The Color Support Download Gboard From The Play Store
Twrp Link: https://mega.nz/#!IEEHiTQJ!T__o91ZFLIY4X46ZBQMIDf41yPMxSwk4_wzJqwR0YxE
Click to expand...
Click to collapse
I did a full system backup with twrp would it help if I gave that to you for rom building
I can try
Thomas080808 said:
I did a full system backup with twrp would it help if I gave that to you for rom building
Click to expand...
Click to collapse
I have built a stock rooted rom, but it will not complete the initial setup. Its as if there is no data when it shows 4g lte of wifi, strange.
And what about sim lock? Is this ROM unlocked?
arcos said:
And what about sim lock? Is this ROM unlocked?
Click to expand...
Click to collapse
Your asking 2 questions thinking they are related. The rom is unlocked meaning you can change it if there was a rom for it bootloader is unlocked so tou can modify the recovery bit sim lock is another thing they are not related in any way shape or form. If tour asking id it can be sim unlocked then yes it can be but that proceas is not like flashing a new rom to make that part work sim unlocking would work on the ohone on stock or not that just depends on who you got the phone feom like tmobile or metro tjey have presequets on how to sim unlock or you pay someone to do it for you
So in other words just because you have custom recoveey or rom or not sim unlocking is another process that has nothing to do with the phone being stock or not if that makes any sense
Thanks for the answer. Do you know how or who can remove sim lock from a K20 Plus? The original network is MetroPCS.
arcos said:
Thanks for the answer. Do you know how or who can remove sim lock from a K20 Plus? The original network is MetroPCS.
Click to expand...
Click to collapse
Yes you can either pay for it now or wait the 3 months or so and metro unlocking app will do it free the option is yours
---------- Post added at 08:04 PM ---------- Previous post was at 08:00 PM ----------
Esin8785 said:
Yes you can either pay for it now or wait the 3 months or so and metro unlocking app will do it free the option is yours
Click to expand...
Click to collapse
Herea metropcs sim unlock policy 90 days of active aervice amd they will unlock free if not then you need to find someone on the net or here on xda and pay for someone to unlock to for you
https://www.metropcs.com/terms-conditions/phone-unlock-policy.html
Has this worked for anyone? I tried it, I extracted the TWRP folder and all its contents on the sdcard went into restore (in twrp) but nothing was found.
New Optimus said:
Has this worked for anyone? I tried it, I extracted the TWRP folder and all its contents on the sdcard went into restore (in twrp) but nothing was found.
Click to expand...
Click to collapse
Backups need to be i in twrp/Backups/LGxxxxxxxxxx (model/serial of phone) folder for twrp to see them, not on root of sd card.
If you haven't made a twrp backup, just do a backup of boot to create the proper folder and copy the 2016-12-31--20-18-59_NRD90U folder from the downloaded zip into it.
Thanks, now I am having another issue, I think I can resolve it I can't get twrp to mount /system rw so restoring backups is failing.
Is anyone else having this problem? What I did to fix it was open terminal in twrp, and type "mount -o rw,remount,rw /system" which seems to have worked, this was after installing the no-verify and a SU
New Optimus said:
Thanks, now I am having another issue, I think I can resolve it I can't get twrp to mount /system rw so restoring backups is failing.
Is anyone else having this problem? What I did to fix it was open terminal in twrp, and type "mount -o rw,remount,rw /system" which seems to have worked, this was after installing the no-verify and a SU
Click to expand...
Click to collapse
You have to create a new backup folder , containing only one item. And then take the file that you have of all your real backups , and put it in that spot , if ur backup location is SD card , then this can easily be done useing Sun 3.0 micro SD card reader , or other method. The TWRP will see the file then. If ur backup is in internal memory , u just do the same thing. Useing minimal adb and fastboot (fromXDA). Otherwise TWRP will not see the backup file. There r a couple of videos on Utube as well , that cover this process.
williamacker77 said:
You have to create a new backup folder , containing only one item. And then take the file that you have of all your real backups , and put it in that spot , if ur backup location is SD card , then this can easily be done useing Sun 3.0 micro SD card reader , or other method. The TWRP will see the file then. If ur backup is in internal memory , u just do the same thing. Useing minimal adb and fastboot (fromXDA). Otherwise TWRP will not see the backup file. There r a couple of videos on Utube as well , that cover this process.
Click to expand...
Click to collapse
Yes did that, got that sorted, thank you, I was asking specifically about if anyone else had system that was Read Only, would not allow Read write.
Is this based on a stock Google rom? I'm about to be getting this phone tomorrow through Metro, but I hate the LG UX UI and would rather it be vanilla Android 7.
Worked for mine but xposed makes it boot loop...
[How To Root] Huawei P smart - Android 8 - EMUI 8.0.0
The Rooting was tested by me on this device:
Model: FIG-LX1
Board: FIG-L31
Build No.: 8.0.0.128(C432)
EMUI 8 - Android 8
"free device"
Whether the following instructions are based on provider-branding is applicable, I could not test
and therefore advise against it.
Warning: Rooting will void the device warranty. Be careful with the newly acquired root rights.
I recommend this only to users who are fit in handling a custom recovery.
This TWRP is not yet perfect and should be used with caution.
Make sure to backup all data on the SD card. (PC, stick, or HD)
Create a backup with the Huawei Backup App.
Make sure the bootloader is open.
OEM and FRP unlocked,
in the device settings, OEM unlock and USB debugging enabled.
The stock kernel is mandatory.
This is flashed in fast boot mode/ bootloader:
If the device is unroot, it does not need to be done.
fastboot flash kernel kernel.img
(KERNEL.img.header must also be in the adb folder.)
This steps must be followed exactly:
Factoryreset in recovery.
Flashing TWRP in the bootloader: fastboot flash recovery_ramdisk FIGO.img
Boot to TWRP and change the file system of the external SD card:
Wipe> Advanced Wipe> Micro SD card> Repair or Change File System> Change File System> FAT:
Execute with "Swipe to Change".
This change deletes all data on the SD card.
Switch to the Mount menu and unmount all partitions. (remove all hooks)
On the internal and external memory.
Then create a backup:
Backup> Select Storage> Micro SD card> select all partitions,
except cache. Then reboot the device into the system and copy the Magisk Zip to the SD card.
Then install in TWRP: Install> Select Storage> Micro SD card> Magisk-v16(1600).zip> Swipe to confirm Flash.
Is there an error message, installing this Zip via MagiskManager App.
Reboot and if not available, install the MagiskManager App and check the root.
The routing is now complete.
Install Magisk modules only with the app; never with TWRP.
Important:
Never wipe the cache or perform a factoryreset.
[*]Please do not experiment with Xposed. This leads to the bootloop and the Firmware must be completely reinstalled.
[*]Please with each backup, make sure to unmount all partitions again. (internal and external)
Update via Firmwarefinder:
Start Firmwarefinder App and select the appropriate update.
Then on GET AN UPDATE THROUGH DNA.
Then on WITHOUT IMEI.
Availability is displayed.
Now click on REGISTER UPDATE and the registration is displayed.
Then click IN-APP PROXY.
Now activate DNS in the router, enter 81.177.139.39 as addresses and save.
Now go to the WLAN settings on the phone, touch and hold the active connection.
Then change to Network in the menu.
Under Proxy-manual, enter localhost and port 8080 as host names for extended options.
Now only set the IP setting to DHCP. Now start the eRecovery.
Vol.+ and Power with PC connection
There on "Download latest version and recovery".
Then click on "Download and recovery" and register there under Select WIFI.
Now the update is displayed and can be started.
When rebooting, the device lands in the bootloop,
execute a factoryreset in the recovery.
After the update reboot and all changed WLAN settings, also in the router
and reboot it again. If you don't, it'll be over by the time
next OTA update is displayed again and again, since the authorization remains in memory.
Themes-Fix, How to Unbrick, FRP-Unlocking and Bootloader Unlocking I described here. Or follow this thread.
https://www.android-hilfe.de/forum/...t-how-to-root-twrp-root-anleitung.866625.html
It is easy to translate with: https://www.deepl.com/translator
All downloads are here: http://www.mediafire.com/folder/7qdu5je08caya/FIGO
Attention: Changing the oem.info can
cause the phone to lock. OEM/FRP=LOCK
Thread Update 2017-03-28:
A new TWRP is now available. It is version 3.2.1-0.
Original Chinese developer version.
Instructions:
First perform the Huawei data backup.
Flash TWRP per Adb as usual.
Then switch from Chinese to English.
Then assign write and read rights by removing the hook in wipe menu.
Now for security, create a backup without data.
Then Format Data.
Create a new full backup including data. This is possible now that the
formatting is the size of Data = 0.
Now reboot the device and set it up completely new.
Now there is a new and configured data partition.
Then turn OEM and USB back on and boot to TWRP.
Then create a new full backup.
TWRP is now fully functional. Only the MTP mode does not work.
http://www.mediafire.com/file/icpfjhw9eysjlao/FIGO321.img
Good luck!
My special thanks for this original Chinese TWRP for free use,
goes to: "weibo.com/xinkid520", FIRE Team(Developer) and "Team Win Recovery Project".
Despite careful elaboration, I cannot guarantee that the execution of this manual will not cause any damage to the device or operating system and therefore I do not assume any liability for any damage or malfunction of the hardware and software! If you are still unsure, follow these steps: Follow the instructions only if you or your device is subject to any conditions (model number, Android version, etc.). Read the instructions carefully and completely, look up unknown terms. Check downloaded files for viruses. Make a backup of important settings and data. Do not follow the instructions if you do not know what you are doing.
These warnings must be logical. Please process my comments correctly.
Many thanks to: funkyhuawei.club, Jrummy, Chainfire, Stephen (Stericson) +
Jmz Software, TWRP, osmOsis,Topjohnwu and Huawei Technologies Co., Ltd 华为技术有限公司
it's alive!!! FIGO-LX1C10B120
Men I love you!!!
Thank you monster!!!! [emoji8]
thanks !! are we getting a Huawei P smart forum here soon ??
Themes
I cannot apply themes after Root ?
Hello,
could you also provide the vendor.img?
Would be really nice.
Thx in advance
@enjac
Forum habe ich beantragt.
I have applied for a new forum.
@JahSound77
Flash the cust.img. Then it works.
@Destroyer706
Vendor kannst Du nicht mit adb flashen.
You cannot flash Vendor with adb.
Hey, guys, I got a brick. Can someone save/extract the "kernel. img"
from the 122. Or can someone from the sources compose a kernel. img? I don't have a linux pc.
:crying:
I know I can't flash with adb, but fastboot. I made some changes and want to role back easily.
I try to provide you the kernel img
Themes
I followed your instructions.... fastboot flash cust cust. img
But no luck, after reboot... still can't apply themes from the store .
Destroyer706 said:
I know I can't flash with adb, but fastboot. I made some changes and want to role back easily.
I try to provide you the kernel img
Click to expand...
Click to collapse
I uploaded it now. :good:
https://mega.nz/#F!EplhBBzS!UUgXBRC9DRaExP9HY57FKQ
JahSound77 said:
I followed your instructions.... fastboot flash cust cust. img
But no luck, after reboot... still can't apply themes from the store .
Click to expand...
Click to collapse
You must be logged in to the google account and huawei id. Outside Asia. If it doesn't work, wait one or two days. It'll probably work then. It was like that with me.
Thx. I am already compiling the kernel from source
Destroyer706 said:
Thx. I am already compiling the kernel from source
Click to expand...
Click to collapse
This has never happened to me before. I have always been able to rely on TWRP backups. But without.....
ChinHon said:
This has never happened to me before. I have always been able to rely on TWRP backups. But without.....
Click to expand...
Click to collapse
The thing, I didn't think about, is, I don't know how to repack the image.gz after compiling to flashable boot.img as I don't have a existing boot.img.
Maybe you can advice me.
Can you upload oeminfo file for FIG-LX1 8.0.0.122 (C432) please?
I would like to rebrand my Chinese version (FIG-AL10).
Destroyer706 said:
The thing, I didn't think about, is, I don't know how to repack the image.gz after compiling to flashable boot.img as I don't have a existing boot.img.
Maybe you can advice me.
Click to expand...
Click to collapse
There is no boot. img in the 121 firmware anymore. Only the kernel. img. I flashed that. So I have the bootloop and need the img from 122, so I thought you might be able to extract it from your device.
steveleg said:
Can you upload oeminfo file for FIG-LX1 8.0.0.122 (C432) please?
I would like to rebrand my Chinese version (FIG-AL10).
Click to expand...
Click to collapse
Not included in the UPDATE. APP anymore.
See filelist:
Here is the extracted kernel.img. Hope it helps.
https://mega.nz/#!auo2TAaC!7009dtrK8-uBR39s9fNFf2xCQkEzR1EXURSLBabkuk8
steveleg said:
Can you upload oeminfo file for FIG-LX1 8.0.0.122 (C432) please?
I would like to rebrand my Chinese version (FIG-AL10).
Click to expand...
Click to collapse
I found another update in the net. Here the oeminfo as a self-extracting archive.
https://mega.nz/#!5gcygYLL!Wdlvg5jUo2hv6L7DBtAVT1-0z_WRmSBLuBin7iUGjig
Destroyer706 said:
Here is the extracted kernel.img. Hope it helps.
https://mega.nz/#!auo2TAaC!7009dtrK8-uBR39s9fNFf2xCQkEzR1EXURSLBabkuk8
Click to expand...
Click to collapse
Hey bro, FIGO's alive again. Thanks a million. You're the best.
:good::good:
A/A & Welcome,
READ THE FULL GUIDE OR YOU CAN LAND IN TROUBLE
Ain't gonna work on pie official
AND DO PRESS THE THANKS BUTTON
Disclaimer
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or anything that happens to your device
INTRO
This is a full guide for unlock/relock, install TWRP, Root your device and backup/restore stock OS. Each and every step is explained thoroughly with pictures and videos.
I have ASUS Zenfone Max Pro M1 (6GB variant) (X00TD) (ZB601KL), so I can’t test for other variants. Please report back issues, corrections, omissions, etc., though the guide should work for all devices.
THINGS TO KNOW (IMPORTANT)
~Every text written in double quotes “” means the same written without the quotes.
e.g.:- “abcd” means abcd
“zxcv” means zxcv
They (“”) help to separate usual text from the other text (like a command, file name, etc.)
~If you have not enabled file name extensions then you will see files without their extension and vice versa
e.g.:- “filename”, “mypicture” in 1st case
“filename.extension”, “mypicture.png” in 2nd case, respectively.
~Boot Partition or Bootloader:-This is the partition that enables the phone to boot. Without this partition, the device will not be able to boot.
~Recovery Partition:-Recovery partition lets you boots the device into a recovery mode to perform recovery tasks.
~TWRP: - stands for TeamWin Recovery Project. It is a custom touch recovery that is GUI based.
~Flashing: - simplest: - installing
~Fastboot Partition: - lets us reflash partitions. (On device)
~Fastboot: - is an executable used to reflash partitions. It comes with the Android SDK. (On PC)
~Rooting: - an Android phone lets owner edit system files. Thus enabling various tweaks and use of apps that require root access.
~Device driver: - determines how PC will communicate with a device.
~Unlocking/Relocking:-With a locked Bootloader, booting into custom things is not allowed is not. Unlocking lets us do so.
~Reboot: - Switching ON AND OFF (in simple terms)
Requirements
MIND, PC, USB Cable, Internet, Fully charged PC (Windows OS), and obviously Asus Zenfone Max Pro M1
The Real Steps From Here
FOLLOWING THIS GUIDE YOU WILL PROBABLY LOSE ALL THE DATA ON YOUR PHONE SO MAKE A BACKUP FIRST (Don’t worry it’s in guide too)
STEP 1. Downloading all the necessary files
a. Here are 2 zip file with everything you will probably need following the guide :-
basic zip
extension zip
. I have tested the procedures using these files only so maybe other versions might not work. A “guide.doc” with the same text as in here (on XDA) is also present. It will be of great help if you don’t have internet connection in PC.
The basic zip file contains minium files needed.
The extension zip file contains the TWRP recovery(then one used in the guide),guide.docx ,and the videos used here too.
Copy the twrp file to unlock folder of extracted folder.
b. Extract the zip file above.
First download the zip file and Copy to PC
Then Right Click on it
Then click “Extract All”
Uncheck “Show extracted files…”
Click on “Extract”
The folder “zip” will be extracted
Done
This “zip” folder will be called extracted folder in the guide video link to extract zip
To download most up to date version of the files go to links present at last
STEP 2. BACKUP
a. Use an apk backup tool to backup app installers
VIDEO TO BACKUP APP INSTALLERS
b. Some APPS like Whatsapp, etc. have backup to drive function use that
VIDEO TO BACKUP WHATSAPP CHATS
c. Backup SMS AND Call Logs
VIDEO TO BACKUP CALL LOGS AND MESSAGES
d. Copy each and every file from you internal storage to PC.
Video to backup each file to pc
DONE
Step 3. UNLOCKING BOOTLOADER(Data will be wiped)
2 options:-
A. Official Method (NOT TESTED): -
In extracted folder go to “unlock” folder then “Official” folder. Install the “UnlockTool_9.1.0.3_180621_fulldpi_signed_ZB601KL.apk” in Asus and follow the steps from there.
B. Unofficial Method (Tested):-
a. Installing Drivers
Connect phone using USB cable to PC
Right click on This Pc
Go to “Manage” > “Device Manager” Or Just search for “Computer Management”/“Device Manager”
A list will appear.
Find your device (best way to do so is by disconnecting/connecting the device and notice the changes accordingly in the list)
Now right click on it>”Update Driver Software”>“Browse my computer for driver software”
Now either enter path of the driver folder or click on browse and navigate to the driver path from there.
Press Next OR
“Let me pick …”>and select the driver
video to install driver
The drivers have been installed
b. Booting into FASTBOOT
Switch Off the Phone
Hold the Volume UP and Power ON Button Simultaneously
Device buttons labbled image
You will see this on your phone
image of FASTBOOT screen
c. Unlocking Bootloader
Now connect phone using USB cable to PC
Look for the “unlock” folder in the extracted folder.
Open it
Find “unlock.cmd” or “unlock” file
(Or “unlock no erase.cmd” to keep data {not tested})
Open it
Done
d. You will see some messages in yellow/brown/white colour on your phone
You will most probably see “encrypting your device”, “warning Bootloader unlocked” messages, let phone do its work and don’t interrupt it, and keep cable connected. Phone might reboot too. The phone will at last boot into stock OS and you will see the device setup screen.
image of the warning message
e. Now if you wanted TO ONLY UNLOCK BOOTLOADER THEN THE JOB IS DONE, long press power button. If you want to root or flash TWRP then continue (Tested method to root requires TWRP flashing or you can try the untested method to root only)
Step4. Installing/Flashing TWRP
TESTED METHOD
a. Connect phone using USB cable to PC
b. Don’t setup your device just now because possibilities are you might lose the data again
c. Boot into fastboot mode
d. Open the “unlock” folder in the extracted folder.
Now Two Different ways to opt for from here:-
i. THE LAZY METHOD (Tested)
a. Open “flash_recovery.bat” or “flash_recovery” in the “unlock” folder of the extracted folder.
b. You can flash the tested or any other recovery using this script.
c. Follow the steps from the script
video of how to use the script
d.Then go to step of Flashing ZIPS of The Manual Method
e. Done
OR
ii. The Manual Method (Tested)
a. Keeping Shift Key pressed, right click {with mouse} in the blank white space of the “unlock” folder’s explorer window.
b. From the menu select “open command window here”
c. A CMD window will be opened
open cmd video
d. Now type “fastboot devices”
e. See if your device is connected. You will see something like this
f. Now type “fastboot flash recovery twrp-3.2.3-0-X00TD-20181024.img”
If you want to flash any other recovery instead of “twrp-3.2.3-0-X00TD-20181024.img” write the file name of your recovery file. Make sure it’s in “unlock folder”. Though this recovery is the only tested one (by me).
g. Now keeping the phone connected to PC, boot into TWRP/Recovery by pressing the Volume Down and Power ON Button Simultaneously.
h. The usual warnings, messages and recovery boot screen will flash:-
warning image
twrp flash screen image
i. It may take some time to load so wait for at least 2 minutes.
j. Now if touch is not working press power button 2 times (on and off the screen)
video showing how to enable touch in twrp
k. If it shows “Swipe to Unlock” do so. If it shows “Swipe to Allow Modifications” then wait and continue reading …
swipe to allow image
swipe to unlock
l. “Swipe to Allow Modifications” means you allow TWRP to modify system. This will make sure TWRP remains in the phone and not just vanish after a reboot but it also means you will have to flash some other files to be able to boot into stock rom back.
m.
2 ways from here:-
i. Now after swiping, Decrypt Screen will appear just press cancel.
decrypt screen image
OR
ii. If you have data on the device then enter pin/password or try default_password.
If you had kept pattern then either go back and change it or try this:-
1 2 3
4 5 6
7 8 9
these no’s correspond to pattern dots.
Say you kept pattern “third row left to right” then the password is 789 .
If all these fail then you will have to lose your data.
n. As we don’t have any precious data in our phone we will (or you are compromising)
Press “Wipe”
Press “Format Data”
TYPE “yes”
Press “tick” or “enter key”
Done
wipe data video
>Flashing ZIPS
o. Now Copy these 2 files
i. “decrypt.zip” or “decrypt”
ii. “Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip” or “Disable_Dm-Verity_ForceEncrypt_12.16.2018”
From extracted folder to your phones internal storage.
p. Go to Install>select the zip>swipe to flash (flash dm_verity… then decrypt…)
If you don’t see your device storage connected then try reconnecting using USB cable and also check if MTP is enabled.
enable mtp video
>Done
Want to root? Then continue…
or >
Now reboot to system Go to Reboot>System
video to show how to rebbot to system in twrp
Step 5. Rooting
We will be using Magisk to root you can use any other method but this is the only tested method.
a. Copy “Magisk-v18.0.zip” or “Magisk-v18.0” to your phones internal storage from extracted folder.
b. Go to Install>select Magisk…>swipe to flash
Done
c. Now reboot to system Go to Reboot>System
reboot video
e. To use Magisk properly you may need to download latest apk. (Link at last)
Step 6. Relock (NOT TESTED)
a. Connect phone using USB cable to PC
b. Boot into fastboot mode
c. Open “Relock” folder from extracted folder
d. Open “relock.cmd” or “relock” file
Done
Step 7. RESTORING
a. First setup the Device again
b. Copy each and every file back to the phone storage
c. Now to restore messages see the restoring part of this video here
d. WhatsApp messages will be automatically restored after you install the app with same number as before.
Tips
After rooting don’t just go on and flash a custom rom. Take a backup first (of all partitions) using TWRP and keep it safe somewhere so you won’t need to find unbrick tutorials later. Plus you will have your most stable and tailored rom with you.
Also don’t just go on and flash xyz mod. Research and then Flash.
Magisk is our best friend. It lets you do modifications without hurting the system. The Magisk modules are most safe mods as they can be reverted back easily.
And don’t just go on and debloat stock OS. In Magisk there is a module called Debloater use that. You can easily revert back if anything goes wrong.
Other good Magisk modules: - Energized, Systemizer, MidnightCore & Advanced Charging Controller (acc) but do read their XDA guides first.
Sources/Credits:-
Dm_Verity.zip Official XDA:-
link
Original unlocking XDA:-
link
Magisk XDA:-
link
Original Decrypt Data XDA:-
link
TWRP Used XDA:-
link
Credits to the authors of the above guides
Plus sorry for bad editing of videos. I am facing some problems. Will try to post better videos.
I thank all the members who have made the previous guides for their hard work. This guide by no means disrespects their hard work. This guide is just an Addition instead of an Alternative.
Read the full guide
Press the thanks button
Re edited the guide.
Added link of apps used in YouTube videos.
Not working for pie official
Deleted cruddy comments. Good job.
Good initiative but not so good noob guide. Please format it for better organization and better understanding.
malikmiran19 said:
2. BACKUP
>Use an apk backup tool to backup app installers
howto video
Click to expand...
Click to collapse
Appreciate the effort . I have a suggestion. It would be helpful to put the name or link of the app that you used to back up apks.(some apk extractor lite ig). I'll provide the one I found anyway. https://www.apkmirror.com/apk/ankit.../apk-extractor-lite-2-8-android-apk-download/
camaroamarelo said:
Good initiative but not so good noob guide. Please format it for better organization and better understanding.
Click to expand...
Click to collapse
Did so
GliderZ said:
Appreciate the effort . I have a suggestion. It would be helpful to put the name or link of the app that you used to back up apks.(some apk extractor lite ig). I'll provide the one I found anyway. https://www.apkmirror.com/apk/ankit.../apk-extractor-lite-2-8-android-apk-download/
Click to expand...
Click to collapse
Added apk links in YouTube videos
Anyone tried unlocking without erasing data?
TheDarkKnight said:
Anyone tried unlocking without erasing data?
Click to expand...
Click to collapse
nyimak
fuzuy said:
nyimak
Click to expand...
Click to collapse
What?
TheDarkKnight said:
What?
Click to expand...
Click to collapse
it means im interested in your question and im following it
I want to unlock bootloader, flash TWRP and flash a custom ROM (Cerberus OS).
I have rooted and flashed TWRP before in my previous device but I'm not familiar with unlocking and Custom ROM.
Do I have to follow all hese steps for what I want to do or I must skip decrypt/encrypt and Magisk?
dharsouparno1 said:
I want to unlock bootloader, flash TWRP and Custom ROM.
Click to expand...
Click to collapse
U can flash twrp then flash ROM and probably flash magisk for root tooo
malikmiran19 said:
U can flash twrp then flash ROM and probably flash magisk for root tooo
Click to expand...
Click to collapse
Thanks for the help.
I'm running into some problems while installing the driver software on my Windows 10 laptop. It shows Error 10 this device cannot start.
I tried to uninstall and reinstall the drivers, rebooted my pc on every step, tried to install while connected to my phone, but nothing seems to work.
I've installed the Pie Beta for Asus Zenfone Max Pro M1 (not sure if this is causing it)
Is there a solution to this problem?
I am currently on Beta Pie...will these methods work for bootloader unlocking and TWRP, custom rom flash ???? I just wanna use PE/Havoc OS rom...no other tweaks or root
thanks its working
I updated to pie beta and I think this guide is not working for that, because when flashing twrp. I'm getting 'request download size is more than allowed size' and I tried every way possible to solve it. But no luck Hope you can help me with it, or maybe it'll work after stable version?
---------- Post added at 04:15 AM ---------- Previous post was at 04:11 AM ----------
utsavdey said:
I am currently on Beta Pie...will these methods work for bootloader unlocking and TWRP, custom rom flash ???? I just wanna use PE/Havoc OS rom...no other tweaks or root
Click to expand...
Click to collapse
It's not working for me. I also updated to pie beta few days back.
Is this method working on pie stable build
Anyone tried this method on the stable pie build 056?
Greetings everyone, i go by the name Ainz Ooal Gown. Here i bring you the a guide to flash GSI roms to your V40
Fist things first if you try this and end up with a brick or your device transforms and tries to take over the world; it's not my fault you messed up not me. So just read all of this thread not just the O.P to, and get out of a bind if you reply with "the thread is too long i wont read it please help" don't expect anything short of "there's a search bar use it"
Requirements
Unlocked bootloader
TWRP
Installation guide:
You need to download Lineage OS 16 by Xsavi i recommend the build "lineage-16.0-20190914-UNOFFICIAL-judypn(More LG Stuff use this).zip". Put into your external SD
You need to download a GSI from here https://forum.xda-developers.com/project-treble/trebleenabled-device-development i personally recommend Havoc OS 2.9 and Resurrection Remix 7.0 download the Arm 64 A/B Variant and what ever recommended Gapps Package is linked.
Extract the GSI you downloaded and copy the extracted Folder into your external SD.
Boot into TWRP and check your active Slot in the reboot menu.
Flash LOS 16 Install -> select the ROM zip -> tick Inject TWRP -> Swipe for install (if you're on a, it will be installed to b, and vice versa).
Go to and select Reboot Menu -> select your inactive slot -> select recovery and you should reboot into your inactive slot.
Go to and select Wipe Menu -> Swipe to factory reset
Select install and navigate to your downloaded GSI -> select install image -> select the GSI image -> select the bubble next to "System Image" -> Swipe to Custom Flash.
Select the wipe menu -> select advanced wipe -> select the square next to "System" -> select "Repair or Change File System" -> select Resize File System -> Swipe to Resize.
Install any Gapps and/or Magisk and reboot.
You will probably have to add your Carriers APN settings for Data and MMS to work.
Thanks to: @SGCMarkus @Xsavi
Ainz_Ooal_Gown said:
Hello here i will be uploading the instructions for running GSI Treble Oreo and Pie roms.
At the moment i'm making sure everything is working before i upload those instructions and links please be patient last thing i want to do is make you device a fancy brick.
Click to expand...
Click to collapse
Hello!
Maybe you have a dump system or stock firmware for twrp?
Or maybe there is an instruction for unpacking the kdz firmware
scrubber said:
Hello!
Maybe you have a dump system or stock firmware for twrp?
Or maybe there is an instruction for unpacking the kdz firmware
Click to expand...
Click to collapse
GSI would be without KDZ...
Ainz_Ooal_Gown said:
GSI would be without KDZ...
Click to expand...
Click to collapse
I know this :fingers-crossed:
I really need a dump to port the sound equalizer of the LGv40
Help me please
Here we go??
The Guide is Finished
scrubber said:
Hello!
Maybe you have a dump system or stock firmware for twrp?
Or maybe there is an instruction for unpacking the kdz firmware
Click to expand...
Click to collapse
To unpack a kdz use SALT on linux, works best for me
When I flash LOS16 into my inactive B slot, I am unable to boot into TWRP on slot B because there's some Lineage recovery in place and no option to flash anything and the sideload option doesn't work; I am checking inject TWRP. Am I missing something?
grandomegabosses said:
When I flash LOS16 into my inactive B slot, I am unable to boot into TWRP on slot B because there's some Lineage recovery in place and no option to flash anything and the sideload option doesn't work; I am checking inject TWRP. Am I missing something?
Click to expand...
Click to collapse
If you injected TWRP and made sure it was checked it should've given you TWRP in slot b I'll pm you with what to do give me a sec
On step 9, I get a failed error on resize. The error is:
Code:
/sbin/e2fsck -fp /dev/block/bootdevice/by-name/
system_b process ended with ERROR: 1
Unable to repair system
Anyone know how to fix this?
EDIT: I tried to install gapps after this, but it failed because of insufficient space. Went to check the /system partition size, and it only has 65MB free out of 1637MB. Is there a way to restore the original partition size and start from scratch?
xPreSiDenT said:
On step 9, I get a failed error on resize. The error is:
Anyone know how to fix this?
EDIT: I tried to install gapps after this, but it failed because of insufficient space. Went to check the /system partition size, and it only has 65MB free out of 1637MB. Is there a way to restore the original partition size and start from scratch?
Click to expand...
Click to collapse
You have 2 things to try, 1st. resize again and see if the error happens again... 2nd. Reboot recovery and try once more I've had this happen to me.
Ainz_Ooal_Gown said:
You have 2 things to try, 1st. resize again and see if the error happens again... 2nd. Reboot recovery and try once more I've had this happen to me.
Click to expand...
Click to collapse
I already booted into the rom. Would that affect anything? I'm gonna try anyway.
Edit: It worked. Gapps flashing now. Hopefully all will be well.
xPreSiDenT said:
I already booted into the rom. Would that affect anything? I'm gonna try anyway.
Edit: It worked. Gapps flashing now. Hopefully all will be well.
Click to expand...
Click to collapse
You can always factory reset after flashing gapps to get all your stuff synced and what not...or just add your account after and it may tell you to finish setting up.
Ooo interesting guide. Nice one :good:
Hey guys any workaround to get pie ? For at&t unlocked v40, currently in malaysia , dont have at&t carriers here .
So this would work with havoc 3 probably? I look forward to trying in a little.
Would this guide work with LOS17 that is currently in the ROMs section?
cavcagamgee said:
Would this guide work with LOS17 that is currently in the ROMs section?
Click to expand...
Click to collapse
If you mean Los 17 from SGC Markus? Then nope his rom has its own instructions and if you mean as a base for GSI well you can try but I haven't had any luck.
Is there a way to remove the GSI without reflashing the whole thing? RR is having an issue with the camera that is still in development. Is there any way to revert to the LOS 16 without losing my data?
cavcagamgee said:
Is there a way to remove the GSI without reflashing the whole thing? RR is having an issue with the camera that is still in development. Is there any way to revert to the LOS 16 without losing my data?
Click to expand...
Click to collapse
Restoring a back up would do it...if you made one...