Hello all developer,
here is the link https://androidfilehost.com/?w=files&flid=259881
(link changed 20180326, files now on AFH)
inside "H9L"
- H9L-PartList...........................................................Partition-List from my H9L
- recovery_ramdis.img................................custom-recovery
- recovery_ramdis.img.header.........custom-recovery-header
- update.app.gz......................................................update.app zipped with gzip
- update-app-gz-md5..................................md5sum update.app.gz
if download o.k. / md5sum o.k. / unzip
then have fun :laugh:
other message to me
you feel free to give "Thank's"
if i can help you - this is fun for me :angel:
i am extract from this update.app recovery_ramdis.img and system.img. This is the way return to custom-OS by my testing with developer-ROM. !!!
updated 20180404 :
excuse me. please. beginner mistake. i write custom, i mean "factory". this update.app is a copy from my phone. is comming with OTA on my phone
Hey JamesBott!
Glad to see you got it sorted:good:
This wil give a lot more users, myself included confidence to try out a custom ROM, knowing the can safely go back again.
I will try it out over the weekend
is it twrp zip or adb sideload zip?
@jusumgeezer
testing and the file's = o.k. - have fun! my fun is your fun :laugh:
i love the community and this is a little bit relove :angel:
@aveemashfaq
it's zipped on linux with gzip. o.k.?
and Linux-sha256sum
You need other info - write here please
boot loop hoor 9 lite
Hello
I can't use it in my sd card after extraction in the dload folder i have "check update, install the update... and his blocking a 5% then reboot loop"
I have try all the wipe and factory reset for nothing (so I lost usb debuging and adb communicates liked with my honor 9 lite)
i'm really lost, please save me I needs a solution to return on the original firmware
My basic problem is the xposed framwork installation (without module no time) after installing my honor as restart and go loop boot T_T
it's possible to force hisuite to inject in my honor the good firmware ?
sorry for my bad english i'm french.
thanks you in advance for your help
Pyro.ted said:
"check update, install the update... and his blocking a 5% then reboot loop"
Click to expand...
Click to collapse
Same here. Any way to force that update?
evolucja said:
Same here. Any way to force that update?
Click to expand...
Click to collapse
now i trying this
https://forum.xda-developers.com/p9/help/huawei-updater-hisuite-t3548003
send me u'r result
Pyro.ted said:
now i trying this
https://forum.xda-developers.com/p9/help/huawei-updater-hisuite-t3548003
send me u'r result
Click to expand...
Click to collapse
Well I managed to unpack system.img via Huawei Update Extractor but after flashing via TWRP it does not boot (bootloop on Honor animation).
evolucja said:
Well I managed to unpack system.img via Huawei Update Extractor but after flashing via TWRP it does not boot (bootloop on Honor animation).
Click to expand...
Click to collapse
ok ty i stopped my search i wait when hisuite think at add the firmware on eRecovery via wifi or via the soft hisuite directly by update ... :/
Hi all
requirement : honor 9 lite with LLD-L31 8.0.0.x(C432), bootloader unlocked.
everyone how flash : you ar developer & tester on your phone ! you carry the responsibility !
i am use pur custom-rom, no xposed framwork ...
can you go with phone in bootloader-mode ?
by me : phone off / usb-wire out of phone / press and hold "vol-down" and put usb-wire in phone. start phone in bootloader : bingo!
you see on bootloader-screen "unlock" & "unlock" in red (by me) the phone is ready to flash
then extract from update.app "recovery_ramdis.img & header" and "system.img & header"
put this 4 files in adb-folder / Windows: open command and cd.. to this folder / on linux open terminal and cd.. to the folder
on my linux-pc i am this files in /home/username/adb. if i start terminal i am automatically in my home-folder and write only "cd adb". this is short-way
fastboot devices (check is phone connected)
if phone connected : fastboot flash recovery_ramdisk recovery_ramdisk.img (extracted out update.app)
next fastboot flash system.img (extracted from update.app)
if this ended : you have customOS on phone
next fastboot erase userdata (this doing what you reed : erase! userdata)
next press and hold "vol-up" and power, phone vibrate and you see Huawei-boot: release power, you see pre-boot messages: release "vol-up", phone boot in erecovery
in erecovery wipe cache and factory-reset . this mace low-level format user_data 0...100%. now is userdate clear and fresh formated. reboot
phone boot as a new phone ! now config, install apps ...
if your phone boot to bootloader and bootloader is unlocked: you can do this how match you need
i test developer-rom's from other phones (oreo) and have this 4..5x doing and it's working way. stony way, hard way - but is working. My phone run.
i hope this is helpful
i hope you think on this: by now is no twrp with working backup & recovery available and i found by now not working developer-rom for this phone. i search continue.
you can on this way only restore the customOS - nothing else. no userdata.
AND FLASH NEVER OTHER as "recovery and/or system". ALL OTHER can brick your phone
excuse my writing "i am use pur custom-rom". i mean "stock-rom" : original manufacturer rom
Just for Info
This is Tread for "Here is the Update.App LLD-L31 8.0.0.127(432)FULL"
Not "how to repair bootloop"
Please make new thread "how to repair bootloop"
i am help if i can help!
only i am write what's working by me. And what's not. That's all
Pyro.ted said:
Hello
I can't use it in my sd card after extraction in the dload folder i have "check update, install the update... and his blocking a 5% then reboot loop"
I have try all the wipe and factory reset for nothing (so I lost usb debuging and adb communicates liked with my honor 9 lite)
i'm really lost, please save me I needs a solution to return on the original firmware
My basic problem is the xposed framwork installation (without module no time) after installing my honor as restart and go loop boot T_T
it's possible to force hisuite to inject in my honor the good firmware ?
sorry for my bad english i'm french.
thanks you in advance for your help
Click to expand...
Click to collapse
by this time is nothing download by huawei - sorry
look post #10
this work by me. it's work by you? test on your own risk!
next day i make new thread "how i repair my bootloop" with emphasis of "my". please wait
look https://forum.xda-developers.com/9-lite/development/honor-9-lite-how-repair-bootloop-t3768384
ok i going to try this method now thanks and yes i have bootloader and fastboot but no twrp i send you my result
thanks again for your help
---------- Post added at 10:21 AM ---------- Previous post was at 09:42 AM ----------
OMG it's work really thanks again and again now i forgot this twrp i just go rooting and no more X)
You are my Savior
thanks again
other question..
tonight i go trying to flash my honor for install Xposed sdk26 for oreo 8.0.0 i send u my result in 12 hour i think this can work i see that tonight
have a good day
@Pyro.ted
that's a good idea. i not use Xposed. you have custom-recovery and -system and can always reflash - no risk !
i hope for "twrp full function". then we have backup from all and can "test - not working - restore" and "no-risk & full-fun"
... don't work i'v try with arm & arm64 sorry
can i install it in my lld l10?
@leon21062000
lld-l31 = european version.
lld-l10 = ? (country) version.
I do not think so. It can work - but not either, i can not gauge the risk. I mean, let it be better
JamesBott said:
@leon21062000
lld-l31 = european version.
lld-l10 = ? (country) version.
I do not think so. It can work - but not either, i can not gauge the risk. I mean, let it be better
Click to expand...
Click to collapse
how long used it in lld-al10
Related
I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.
I have the same problem but with a different firmware.. now only thing i can do is use dc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.
MobileTechArena said:
I have the same problem but with a different firmware. now only thing i can do is usedc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.
Click to expand...
Click to collapse
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.
barnabaXXX said:
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.
Click to expand...
Click to collapse
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Thanks for making it clear. Please tell me if it worked or not. Thanks.
barnabaXXX said:
I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.
Click to expand...
Click to collapse
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".
barnabaXXX said:
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".
Click to expand...
Click to collapse
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?
barnabaXXX said:
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?
Click to expand...
Click to collapse
Unfortunately I can't help you further than what I already posted.
But keep updating in case someone more knowledgeable peeks in.
similar problem....I was fairly good but play store was stuck in pending download....
I did a wipe in TWRP, and ended with a black screen...
I can boot to eRecovery, but it fails.and also to TWRP.
when attached to PC it keeps being seen and unseen as if its stuck in a power on cycle
Any help would be greatly appreciated.
Already Tested
JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Hello did you already test ???
Here is the solution for every PRA-LX1: [http : // www . htcmania . com / showthread . php ? t=1326478] (sorry for the spaces, but I don't have enough posts written to post external links )
Unfortunately, it's from a spanish forum. I didn't found any problem to follow this tutorial, but maybe for someone it could be a little difficult.
Anyway, it works!
MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Where did you find the C432 firmware? I can't succees to find it
Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.
Iocere said:
Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.
Click to expand...
Click to collapse
Yeah, that's the way! It worked for me too!
juanmemo said:
Yeah, that's the way! It worked for me too!
Click to expand...
Click to collapse
Also i noticed everytime a OTA fails you get the full version offered on next boot. So you should get a full B164 aswell after it failed
JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
how can you boot into recovery ? i can only boot into twrp or fastboot & rescue or if i plug the huawei to the pc erecovery ???
---------- Post added at 12:16 AM ---------- Previous post was at 12:13 AM ----------
i have an huawei pra-lx1 c530 it used to boot into pra-lx1c530b111 rooted and twrp but now it doens't boot anymore, i'd like to flash to c530b160 but i can't find the firmware images
tiagoggama said:
Hello did you already test ???
Click to expand...
Click to collapse
Thanks men
I CONFIRM IT WORK PERFECTLY
For the second part go to this link for more detail :
https://boycracked.com/2016/03/14/h...-unbrick-firmware-any-huawei-android-devices/
Hi!
I see the large number of requests concerning the roolback of a custom rom to a official and untouched EMUI 4, i decide to create this thread.
After follow that methode, you able to rest on official EMUI and get the new update automatically on OTA (directly on your phone) OR try to install custom rom with a clear and good base version.
1. You ave access on TWRP?
-If not, pleas unlock your bootloader (again) and flash TWRP recovery for you actual version (marshmallow or nougat).
-perform a full wipe and restore your partitions on "ext4" format, shutdown phone.
2. Get a "oem_info.zip" for your model phone (dont extract the .zip) and push it on your internal or external sd.
-This archive contain cust and oem info for patched your phone at the correct manufacture information.
-I have a link for VNS-L31 (c432, but is not very important) HERE LINK
-If you have other model (VNS-L31) pleas find a correct patch for you (VNS-L21, ...).
3. Find and download a EMUI marshmallow official full-ota update.
-for a VNS-L31 i advice choice a VNS-L31C432B160 full-ota update.
4. Unpack your update archive.
5. Create "dload" folder on your internal or external sd and put it UPDATE.APP
6. Reboot phone on TWRP recovery and flash "oem_info.zip"
7. Use dload methode for update (hold 3 buttons phone and dont release before "dload screen" appears)
8. Unlock your bootloader again (important!) And make a factory reset
9. Your phone reboot (please wait ) and done!
Ok now you are on official version, please update on setting menu >> update and choice, rest on official or flash a custom rom..
P9 lite brick precision:
In my personal experience the "p9 lite" is very easy to flash, mod or other tips and the risk of HARD brick is very very tiny.
If you see this page and your phone bootloop, relax, keep calm at 99,999% you have a little and ridiculous brick
Good luck and flash happy!
hi! i'm on 381, on my phone i have root, twrp and elite kernel...this guide is good for me???why after dload method i have to re-unlock my bootloader??
thank you and sorry for my english XD
macao1989 said:
hi! i'm on 381, on my phone i have root, twrp and elite kernel...this guide is good for me???why after dload method i have to re-unlock my bootloader??
thank you and sorry for my english XD
Click to expand...
Click to collapse
Yes, is good for you.
Not necessary to re-unlock bootloader.
Therand said:
Hi!
I see the large number of requests concerning the roolback of a custom rom to a official and untouched EMUI 4, i decide to create this thread.
After follow that methode, you able to rest on official EMUI and get the new update automatically on OTA (directly on your phone) OR try to install custom rom with a clear and good base version.
1. You ave access on TWRP?
-If not, pleas unlock your bootloader (again) and flash TWRP recovery for you actual version (marshmallow or nougat).
-perform a full wipe and restore your partitions on "ext4" format, shutdown phone.
2. Get a "oem_info.zip" for your model phone (dont extract the .zip) and push it on your internal or external sd.
-This archive contain cust and oem info for patched your phone at the correct manufacture information.
-I have a link for VNS-L31 (c432, but is not very important) HERE LINK
-If you have other model (VNS-L31) pleas find a correct patch for you (VNS-L21, ...).
3. Find and download a EMUI marshmallow official full-ota update.
-for a VNS-L31 i advice choice a VNS-L31C432B160 full-ota update.
4. Unpack your update archive.
5. Create "dload" folder on your internal or external sd and put it UPDATE.APP
6. Reboot phone on TWRP recovery and flash "oem_info.zip"
Click to expand...
Click to collapse
I can do everything up to point 6... won't enter to twrp... stays on Your device is now booting...
Update: I can now reach point 7 but now won't do dload (3 buttons) method... Huawei logo all the time. Can't even turn off the phone
In my other thread you post the same problem but is not entirely the same..
You succeeded to enter on fastboot mode? Flash recovery?
If you follow the steps 1-5 is impossible to fail the 6 point..
You have acces on fastboot mode or not?..
Therand said:
In my other thread you post the same problem but is not entirely the same..
You succeeded to enter on fastboot mode? Flash recovery?
If you follow the steps 1-5 is impossible to fail the 6 point..
You have acces on fastboot mode or not?..
Click to expand...
Click to collapse
I did update the post... 3 hours ago I wasn't able to enter TWRP, some way I did managed, now I can enter fastboot, I did flash custOEM (sorry I don't remember exactly the name but it's the one of your post) .zip file. Now I can't do dload method, stuck on huawei logo. If I try to go to recovery, I got red message "phone fail validation"...
I know, I post on both but I was trying to do everything...
just tried... validation red error message won't let me go to TWRP now...
You have a VNS-L31C432?
Your phone does not enter at dload mode?
Wipe all partitions an retry flash a oeminfo for your model phone (if not C432 you need right oeminfo).
Therand said:
You have a VNS-L31C432?
Your phone does not enter at dload mode?
Wipe all partitions an retry flash a oeminfo for your model phone (if not C432 you need right oeminfo).
Click to expand...
Click to collapse
How can I wipe all partitions if stuck in Huawei logo? Is there a way to do everything from adb command line? (I'm using Mac and cannot use all the tools I've found here XDA neither hiSuite which is basically a backup photo/video only the Mac version).
Thank for helping, really appreciate
To answer your question in the other thread, yes bootloader is unlocked and I am on C432.
What's your rom have before the bootloop?
You have the right version of TWRP for your rom?
If you have a MM version Don't flash a TWRP for N.
Send me a link to TWRP version used (thread forum)
Therand said:
What's your rom have before the bootloop?
You have the right version of TWRP for your rom?
If you have a MM version Don't flash a TWRP for N.
Send me a link to TWRP version used (thread forum)
Click to expand...
Click to collapse
Before the bootloop I was on L31C900 (on the phone) but I did actually flashed C432B160 because I did rollback. TWRP used I've found in the other post where there's a OEMfile to flash (but for this I need to double check because I did look so many pages which I am not 100% sure.
I not have experience on other model that C435.
But i suggest to find a oeminfo for your variant (C900?)
For TWRP you need flash a version for MarshMallow HERE
Flash it and pas return here (fastboot flash return and first enter to new recovery)
Hi, found Windows emulator for MacOs so I extract from update.app boot.img and flash.
I did format all partitions as told using a proper twrp this time.
What's next step, system says NO OS INSTALLED?
islandman75 said:
Hi, found Windows emulator for MacOs so I extract from update.app boot.img and flash.
I did format all partitions as told using a proper twrp this time.
What's next step, system says NO OS INSTALLED?
Click to expand...
Click to collapse
Flash partitions on .img files is not needed.
Just find a corect oeminfo for your model phone.
Flash it on TWRP recovery.
Use dload methode to update on basical version (MarshMallow b160).
After that, unlock bootloader again and make a factory reset.
Switch on your phone (the first boot make long time).
Update on last emui on OTA.
Done!
After that you able to install a custom rom.
Therand said:
Flash partitions on .img files is not needed.
Just find a corect oeminfo for your model phone.
Flash it on TWRP recovery.
Use dload methode to update on basical version (MarshMallow b160).
After that, unlock bootloader again and make a factory reset.
Switch on your phone (the first boot make long time).
Update on last emui on OTA.
Done!
After that you able to install a custom rom.
Click to expand...
Click to collapse
Done!
Thanks again you're saving my life!
IT won't turn off so been always on it won't keep the charge... Writing so because apparently it won't go to download mode (dload) if plugged in. On the other way if I unplugged from power it won't even start. Shall I force to download mode using console ADB or FASTBOOT? I had looked but can't find anything...
islandman75 said:
Done!
Thanks again you're saving my life!
IT won't turn off so been always on it won't keep the charge... Writing so because apparently it won't go to download mode (dload) if plugged in. On the other way if I unplugged from power it won't even start. Shall I force to download mode using console ADB or FASTBOOT? I had looked but can't find anything...
Click to expand...
Click to collapse
I not understand.
You not able to switch on your phone without connected charger?
Therand said:
I not understand.
You not able to switch on your phone without connected charger?
Click to expand...
Click to collapse
Correct. Because I'm not able to switch it off it won't keep the charge. When discharged, the minute I do plug on charge it wakes up... That's the loop...
My main question is: does a command exist to enter download mode using terminal?
islandman75 said:
Correct. Because I'm not able to switch it off it won't keep the charge. When discharged, the minute I do plug on charge it wakes up... That's the loop...
My main question is: does a command exist to enter download mode using terminal?
Click to expand...
Click to collapse
You have a hardware bug?
No abd command to enter dload mode..
Try flash a update.zip with twrp (not guaranted)
After that unlock bootloader again and make factory reset.
Therand said:
You have a hardware bug?
No abd command to enter dload mode..
Try flash a update.zip with twrp (not guaranted)
After that unlock bootloader again and make factory reset.
Click to expand...
Click to collapse
I'll try. Thank you
Hi, I followed this guide to go back to stock from elite rom. I flashed my oeminfo.img on twrp and then went to dload combination. Do I have to unlock the bootloader after the reboot? Thanks!
Hi,
I followed your guide and it works perfectly thanks!
Steps:
Prepare and Notice
A. Warning! Flash phone might get it bricked. I am not responsible for it.
B. Important! Remove Huawei "HiSuite" application if it's already installed. It may interfere script running.
C. Only tested ALP-AL00C00 same brand upgrade and downgrade packages.
D. Backup data, it might be restore factory default setting especially using downgrade ROM version.
E. Update package will be put in the internal /data partition.
F. Unlock bootloader before flash steps, use unlock.bat in "HWOTA8_Mate10" lock directory.
G. After update successfully, device might be locked again.
H. Get HWOTA8_Mate10 Package (HWOTA8_Mate10_2018052301_Remove_ota_rebrand.zip)
I. Windows10 can't recognize mate 10 fastboot device, see dc-unlocker free registry patch to fix it. (Link)
J. Mate 10 has imei in oeminfo, which is used for unlock bootloder not for system. Run lock/info.bat to see oeminfo IMEI.
Magisk (Thanks to @topjohnwu)
A. Install Magisk by running magisk/magisk.bat and follow instructions.
B. Install Huawei Wifi Fix module (Huawei-Wifi-Fix_v1.0_1500_2018041201.zip), if wifi is not working. [Not Must]
C. Join or dig more information from Magisk forum.
Change Log:
2018052301: Remove ota function, it bricks phone with recent new ROMs.
2018051001: Remove rebrand function, it bricks phone with recent new ROMs.
2018042501: Add BLA-AL00C786 porsche/cn (Not tested).
2018042401: Repack use full compress if update zip failure. Support ALP-L29C636B134 and BLA-L29C636B137 repack.
2018041201: New Magisk v16.3 and WiFi Fix module use 1500 template.
2018031301: Add new brand (no test), ALP: C69, BLA: C55 C109 C771 C782
2018021601: Replace with new Magisk 15.4, add huawei wifi fix module.
2018020601: Support BLA-L29C432B130-log repack.
2018012201: Port Magisk to Mate 10, only test ALP-L29C636B129 pass safetynet.
2018011401: Add new brand (no test), ALP: C02 C40 C109 C212 C346 C432 C605, BLA: C25 C33 C34 C45 C316 C521
2018011301: Support new update-binary
2018010501: Repack add lock bootloader selection, rebrand use huawei function which is more safe.
Nice, glad to see its very similar to the p10/mate 9.
Can this work on mate 10 Pro?
mankindtw said:
Steps:
Prepare and Notice
A. Warning! Flash phone might get it bricked. I am not responsible for it.
B. Only tested ALP-AL00C00 same brand upgrade and downgrade packages.
C. Backup data, it might be restore factory default setting especially using downgrade ROM version.
D. Update package will be put in SD card.
E. Unlock bootloader before flash steps.
F. After update successfully, device might be locked again.
G. HWOTA8_Mate10 Package (HWOTA8_Mate10_2017120901.zip)
Flash Update
A. Put three huawei update files (update.zip, update_data_public.zip, and update_all_hw.zip) into "HWOTA8_Mate10" repack directory.
B. Run repack.bat to patch three zip files.
C. Use Vol-Dn + USB cable to boot into fastboot mode.
D. Run Replace_Recovery.bat in HWOTA8_Mate10 and follow message instructions.
E. It will reboot and install update automatically.
Click to expand...
Click to collapse
Wow, will give it a try
---------- Post added at 05:29 AM ---------- Previous post was at 04:45 AM ----------
Hope there might be some one who will elaborate Rebranding of Mate 10
k4fari said:
Hope there might be some one who will elaborate Rebranding of Mate 10
Click to expand...
Click to collapse
I'm going to try rebrand.
Its for the first time ever i am unable to unlock the boot loader, i obtained the boot loader unlock code by the following method for my mate 10. Don't know whats went wrong , when i try to unlock the boot loader in fastboot its giving an error. anyone can guide me on this?
Edit: I logout the Huawei Id and also set the usb debugging to Manufacture Mode by using *#*#2846579#*#* and then tried to unlock the boot loader and it worked as a charm.
mankindtw said:
I'm going to try rebrand.
Click to expand...
Click to collapse
Best of luck then.
I have tried the above method and after replace kernel and replace recovery successful i am still unable to boot in twrp mode by using volume + and button mode. Instead of Twrp i get a screen "reboot system, wipe data / factory , wipe cache"
k4fari said:
I have tried the above method and after replace kernel and replace recovery successful i am still unable to boot in twrp mode by using volume + and button mode. Instead of Twrp i get a screen "reboot system, wipe data / factory , wipe cache"
Click to expand...
Click to collapse
There is no TWRP at this moment, I modified stock recovery which can accept adb command.
Your screen is already in "Recovery" and follow message instructions for the next step.
mankindtw said:
There is no TWRP at this moment, I modified stock recovery which can accept adb command.
Your screen is already in "Recovery" and follow message instructions for the next step.
Click to expand...
Click to collapse
Mm You can not even work on the mate 10 pro?
mankindtw said:
There is no TWRP at this moment, I modified stock recovery which can accept adb command.
Your screen is already in "Recovery" and follow message instructions for the next step.
Click to expand...
Click to collapse
Ok got it, now it started to update to 8.0.0.126(c185) the latest one available on ff, i'll post the results after a while.
Regards
it started and the update failed on the phone at 54% whats wrong with me
k4fari said:
it started and the update failed on the phone at 54% whats wrong with me
Click to expand...
Click to collapse
Did you download "FullOTA-MF" ROM and your original brand is "ALP-L29 C185" ?
mankindtw said:
Did you download "FullOTA-MF" ROM and your original brand is "ALP-L29 C185" ?
Click to expand...
Click to collapse
Yes i have downloaded the full ota 8.0.0.126 of 2.68 gb of c185 , currently i am on 8.0.0.119(c185)
This one is have downloaded , is it because i skipped 8.0.0.125(c185) ?
k4fari said:
Yes i have downloaded the full ota 8.0.0.126 of 2.57gb of c185 , currently i am on 8.0.0.119(c185)
Click to expand...
Click to collapse
Try other version of c185 ROM to see if it makes any difference.
mankindtw said:
Try other version of c185 ROM to see if it makes any difference.
Click to expand...
Click to collapse
having slow internet connection, but i will try, can i try simple ota of 500 mb? or this method needs full ota mf?
k4fari said:
having slow internet connection, but i will try, can i try simple ota of 500 mb? or this method needs full ota mf?
Click to expand...
Click to collapse
Don't try, I'll give you another "update_binary" to patch zips.
mankindtw said:
Don't try, I'll give you another "update_binary" to patch zips.
Click to expand...
Click to collapse
Now update stops at 6% in the phone and shows software insatll fails , i have tried many times with the new update_binary file as well, but no luck :crying:
---------- Post added at 08:28 PM ---------- Previous post was at 08:18 PM ----------
mankindtw said:
Don't try, I'll give you another "update_binary" to patch zips.
Click to expand...
Click to collapse
will the small ota brick the phone by this method?
k4fari said:
will the small ota brick the phone by this method?
Click to expand...
Click to collapse
Don't use OTA-MF, you should use FullOTA-MF zips.
mankindtw said:
Don't use OTA-MF, you should use FullOTA-MF zips.
Click to expand...
Click to collapse
i was using full ota mf 8.0.0.126(c185). but was not able to get any success, i am continuously trying since the last 7 to 8 hours:crying:
check the repack.bat plz
hi guys,
yesterday i installed the oreo beta on my VTR-L29 but then i brickedd it *cry*. unfortunateley the unbrick methods found here in the forum don't work because the oreo update made some changes in the system file structure...
has anyone an idea what to do?
maybe someone can provide me a recovery image for twrp? (one for oreo, otherwise it wont work) so i can give this a try...
after over 10 hours of fiddeling around a found a really easy solution:
most of you know HWOTA helps with this, but the "normal" version wont work after flashing oreo. but this version is flashed via twrp and is still working!
but you will need a oreo compatible twrp, which you can find here
i know the links are to mate 9 software, but since the p10 and mate 9 are nearly identical, it works on the p10 as well
can you post the step by step guide?
i am on oreo 8.0.0.046 and want to flash another version, or downgrade to nougat because few things don't work on this version
i dont know if downgrading works, i just reflashed the latest oreo.
accordingly to the first link it should work, just flash the TWRP from the second link and then follow the instructions from the first link.
johdost said:
i dont know if downgrading works, i just reflashed the latest oreo.
accordingly to the first link it should work, just flash the TWRP from the second link and then follow the instructions from the first link.
Click to expand...
Click to collapse
failed install twrp- error find twrp 3.0.3, and i replaced to oero mate 9 recovery....
EDIT: success - problem was on the computer
johdost said:
i dont know if downgrading works, i just reflashed the latest oreo.
accordingly to the first link it should work, just flash the TWRP from the second link and then follow the instructions from the first link.
Click to expand...
Click to collapse
i did sucsses to install twrp but on the second step, when i press on install on twrp, the phone restart to erocovey and failed to find the files. what am i doing wrong?
i think that i am stuck with that version forever....
if you reboot to erecovery, you have not successfully installed twrp. you have to install it with "fastboot flash recovery_ramdisk <path to twrp>"
johdost said:
if you reboot to erecovery, you have not successfully installed twrp. you have to install it with "fastboot flash recovery_ramdisk <path to twrp>"
Click to expand...
Click to collapse
you misunderstood me.
i do have twrp, i created HWOTA8 folder on sd card, copied hwota8 update zip, MHA_RECOVERY8 No check and the 3 files that i renamed as it said. after that, from twrp i clicked on hwota8 update zip and begin flash, the phone reboot to stock recovery and failed to install - "files don't found".
please help me fegure out what's the problem.
thanks
t.h.i said:
you misunderstood me.
i do have twrp, i created HWOTA8 folder on sd card, copied hwota8 update zip, MHA_RECOVERY8 No check and the 3 files that i renamed as it said. after that, from twrp i clicked on hwota8 update zip and begin flash, the phone reboot to stock recovery and failed to install - "files don't found".
please help me fegure out what's the problem.
thanks
Click to expand...
Click to collapse
EDIT : the process is sucsses, but its the same version.... 8.0.0.046
Bricked, no TWRP access, any ideas?
Hi.
I know this about a P10, I have a P10 Plus (VKY-L29C605), but the process should be similar, I think.
I bricked my phone after succesfully upgrading from B174 to B321 using HWOTA. After which I decided, since I was at it, to flash the Hyperplus Kernel. This led to a bootloop. To fix it I decided to just go ahead and HWOTA B321 all over again and get over it, and would have probably gone just fine, except I decided to rebrand (C605 > C432) while I was doing that, silly (no, stupid) mistake. This led to the brick I am currently expriencing, I have no recovery access, erecovery or TWRP.
So now I am left trying to unbrick the phone. I extracted the UPDATE.APP for both update_all_hw.zip and update.zip using the Huawei Extractor Tool with no difficulty, except unbricking methods ask for boot.img, which I could not find, so I went along without it and flashed: cust.img, recovery_ramdisk.img (using fastboot recovery_ramdisk command for Oreo), and system.img. All of the commands completed succesfully, but no shebang, still bricked and no recovery access. I figure this has to do with the rebrand as the result after executing the command "fastboot getvar vendorcountry" shows the rebrand pulled through (hw/eu 432).
I am currently downloading HWOTA8.zip (3GB worth of download) to see if I can do something it. I am also downloading the L29C432B360 OTA-FULL, since I believe I am not getting any progress becuase I used the updates for L29C605B321.
The kind people at funkyhuawei told me they could fix it with their tool, but I don't have the money for that right now.
I will post updates, but any ideas would be greatly appreciated.
Many of us have posted over this in the last couple of days. Seems like Funky Huawei unbrick tool was the mehtod to get it work for me. You could try that!
or use dc-phoenix for me it worked (= in the moment i try to capture the usb ports kommunikation so i have the tool with the aktual firmware longer for 3 days :silly:
would first give dc a try 20 bucks for 3 days is ok i think (=
johdost said:
hi guys,
yesterday i installed the oreo beta on my VTR-L29 but then i brickedd it *cry*. unfortunateley the unbrick methods found here in the forum don't work because the oreo update made some changes in the system file structure...
has anyone an idea what to do?
maybe someone can provide me a recovery image for twrp? (one for oreo, otherwise it wont work) so i can give this a try...
Click to expand...
Click to collapse
Must download some software for your phone, unzip update.zip, decompile UPDATE.APP to .iso files, (like recovery.iso, system, iso, vendor iso, boot iso) use fastboot and 10 minuts job, I brik my device over 10 thimes, and repair it.
So I was able to get the C432B360 firmware and I flashed it, but no I can't enter recovery mode because the battery is low (red lightning bolt/red led flash). Anybody know how to charge or force recovery mode boot from fastboot?
If anyone needs, can use my DC-Phoenix account, I don`t need it anymore.
Your username is: cesedy
Your password is: dnL4eHEm
Greting
ure3808 said:
Must download some software for your phone, unzip update.zip, decompile UPDATE.APP to .iso files, (like recovery.iso, system, iso, vendor iso, boot iso) use fastboot and 10 minuts job, I brik my device over 10 thimes, and repair it.
Click to expand...
Click to collapse
Greeting,
Can you explain the procedure of how to do it?
Thank you
How do I uninstall TWRP and unroot my Honor 9 Lite so i can update the phone to LLD-L31 8.0.0.128(C432) with face unlock?
I have already locked bootloader.
When i reboot the phone it automatically brings me to eRecovery and when i "Download latest version and recovery" it says "Getting package info failed". Please help
OmaroOmaro said:
How do I uninstall TWRP and unroot my Honor 9 Lite so i can update the phone to LLD-L31 8.0.0.128(C432) with face unlock?
I have already locked bootloader.
Click to expand...
Click to collapse
Looks like you "played" a bit to much with your phone. There is no official TWRP yet and no official Firmware Image. So, this looks very bad for you to get out of this again.
Maybe try HiSuite from Huawei or MultiTool
https://forum.xda-developers.com/devdb/project/dl/?id=28734
Probably this could help as long as you can connect via ADB or HDB from HiSuite.
Good luck...
Hey, I've faced the exact same issue. After playing even a bit more, I manged to revert my device (LLD-L31) back to stock.
I've uploaded all the files I used, for you.
It passes SafetyNet check successullfy!
Download required files here
Here is was I did:
Format data using TWRP (Wipe -> Format data)
Enter fastboot mode (Connect to PC, power+ VolDown)
fastboot flash ramdisk ramdisk.emmc.win
fastboot flash kernel kernel.emmc.win
fastboot flash system SYSTEM.img
fastboot reboot
Click to expand...
Click to collapse
Please tell me, if it worked!
Note:
The SYSTEM.img is extracted from the UPDATE.APP from this site.
Kernel and ramdisk are from a LOS-15.1 TRWP backup. Not sure if they're required, but it didn't work for me without flashing them.
error while extracting update.app
hello sir, I'm getting this error while extracting update.app.. recovery ramdisk.img invalid header crc - Expected: 18707 Got:56582
creativeanand said:
hello sir, I'm getting this error while extracting update.app.. recovery ramdisk.img invalid header crc - Expected: 18707 Got:56582
Click to expand...
Click to collapse
Why exactly do you need to extrac the update.app? I've already uploaded all required files and linked them in my previous post.
Also, which program did you use? Which operating system did you use?
now my phone is looping
MateUserHHTT said:
Why exactly do you need to extrac the update.app? I've already uploaded all required files and linked them in my previous post.
Also, which program did you use? Which operating system did you use?
Click to expand...
Click to collapse
now my phone is looping on off, on of
and i can't go to fastboot
creativeanand said:
now my phone is looping on off, on of
and i can't go to fastboot
Click to expand...
Click to collapse
In order for me to help you, I need to know exactly what you did.
So what did you do before your phone went into bootloop? (And don't worry, my Honor 9 lite has been in bootloops 100 of times, we can fix that! )
And how did you try to enter fastboot?
Make sure your phone is connected to a computer via USB!
Then press and hold Volume DOWN and Power button until phone reboots.
Release power when you see the blue honor screen.
Release volume down key, when you are in fastboot.
MateUserHHTT said:
In order for me to help you, I need to know exactly what you did.
So what did you do before your phone went into bootloop? (And don't worry, my Honor 9 lite has been in bootloops 100 of times, we can fix that! )
And how did you try to enter fastboot?
Make sure your phone is connected to a computer via USB!
Then press and hold Volume DOWN and Power button until phone reboots.
Release power when you see the blue honor screen.
Release volume down key, when you are in fastboot.
Click to expand...
Click to collapse
after flash shall i wipe data/ factory reset?
creativeanand said:
after flash shall i wipe data/ factory reset?
Click to expand...
Click to collapse
Again, I need to know whay you did!
You don't necessarily need to factory reset after a flash. But it probably won't make things worse.
But if you are switching the ROM (stock to a custom Rom) you indeed have to format data in twrp.
MateUserHHTT said:
Again, I need to know whay you did!
You don't necessarily need to factory reset after a flash. But it probably won't make things worse.
But if you are switching the ROM (stock to a custom Rom) you indeed have to format data in twrp.
Click to expand...
Click to collapse
i unlocked my phone bcoz the sound of h9l was lower then Redmi note 5 so i wanted to boost the sound with aris sound system and dolby atmos app.
after flashing 'SUPERSU' phone was not starting freeze at honor logo and then i wiped & rested in twrp...
now i did fastboot as you said now eRecovery is asking download latest version, wipe data/ f rest, reboot, shoutdown what shall i do now,,....thank you for helping
creativeanand said:
i unlocked my phone bcoz the sound of h9l was lower then Redmi note 5 so i wanted to boost the sound with aris sound system and dolby atmos app.
after flashing 'SUPERSU' phone was not starting freeze at honor logo and then i wiped & rested in twrp...
now i did fastboot as you said now eRecovery is asking download latest version, wipe data/ f rest, reboot, shoutdown what shall i do now,,....thank you for helping
Click to expand...
Click to collapse
Ok, now I can help you.
First of all, install TWRP. Use img2 (the experimental test build) if img #1 just stucks at the TWRP screen and won't enter the recovery.
Tell me when you succeed
You can get TWRP from here
https://forum.xda-developers.com/9-lite/development/recovery-twrp-3-2-1-0-t3789306
MateUserHHTT said:
Ok, now I can help you.
First of all, install TWRP. Use img2 (the experimental test build) if img #1 just stucks at the TWRP screen and won't enter the recovery.
Tell me when you succeed
You can get TWRP from here
https://forum.xda-developers.com/9-lite/development/recovery-twrp-3-2-1-0-t3789306
Click to expand...
Click to collapse
i did now?
creativeanand said:
i did now?
Click to expand...
Click to collapse
Great!
Now just follow my instructions from my earlier post
Make sure to put the files you download in the same folder as you run fastboot commands, so fastboot can find these files.
Good luck!??
MateUserHHTT said:
Great!
Now just follow my instructions from my earlier post
Make sure to put the files you download in the same folder as you run fastboot commands, so fastboot can find these files.
Good luck!
Click to expand...
Click to collapse
i did as you said .. now phone is not starting stoped at huawei eRecovery
whan i go to twrp phone reboots itshalf after 10sec
If you can boot to bootloader
and bootloader = unlocked
and FRP = unlock
then you can reset the phone to stock-rom
you need download with HuaweiFirmwareFinder 1 FULL-Update from YOUR build
i see in FF "LLD-L31C432B131 FullOTA-MF
download the 3 files, extract with HuaweiUpdateExtractor
- ramdisk.img
- recovery_ramdis.img
- system.img
the extractor do automatik for all *.img 1 *.img.header
copy this 6 files to your ADB-Folder
For reset to stock-rom
- fastboot flash ramdisk ramdisk.img
- fastboot flash recovery_ramdisk recovery_ramdis.img
- fastboot flash system system.img
after this reboot the phone, eRecovery format low-level "data", phone reboot and start as "new" phone (initial settings)
before you do this you can do 1 test :
- fastboot flash recovery_ramdisk recovery_ramdis.img
why?
format low-level "data" work ONLY with stock-recovery, NOT with TWRP
after this is your "data" encrypt !
Only 1 TWRP work with encrypt/decrypt : https://forum.xda-developers.com/9-lite/development/recovery-twrp-3-2-1-0-t3789306
if phone work set PIN for Screen-open (this PIN need TWRP by start for encrypt/decrypt "data")
if you need, you can now flash recovery_ramdisk TWRP.img
if you need install OTA-Updates : if OTA-Update on your phone "install update now ?" answer "NO, later" and
- fastboot flash recovery_ramdisk recovery_ramdis.img (stock-recovery)
and install Update now.
if all work and you need : flash TWRP
i hope you understand this "way"
the advantage : you can install with TWRP OR flash developer-system.img and if anything not work - reset phone to stock-rom
i use ONLY TWRP with encrypt. this is security-question. if phone lost - data is encrypt !
TWRP without encrypt work only
- boot to TWRP
- format data
- boot from TWRP to TWRP
- data have now NO encrypt
Doesn't Android use FBE by default since Android O, so the data is always encrypted no matter what TWRP was used?
JamesBott said:
If you can boot to bootloader
and bootloader = unlocked
and FRP = unlock
then you can reset the phone to stock-rom
you need download with HuaweiFirmwareFinder 1 FULL-Update from YOUR build
i see in FF "LLD-L31C432B131 FullOTA-MF
download the 3 files, extract with HuaweiUpdateExtractor
- ramdisk.img
- recovery_ramdis.img
- system.img
the extractor do automatik for all *.img 1 *.img.header
copy this 6 files to your ADB-Folder
For reset to stock-rom
- fastboot flash ramdisk ramdisk.img
- fastboot flash recovery_ramdisk recovery_ramdis.img
- fastboot flash system system.img
after this reboot the phone, eRecovery format low-level "data", phone reboot and start as "new" phone (initial settings)
before you do this you can do 1 test :
- fastboot flash recovery_ramdisk recovery_ramdis.img
why?
format low-level "data" work ONLY with stock-recovery, NOT with TWRP
after this is your "data" encrypt !
Only 1 TWRP work with encrypt/decrypt : https://forum.xda-developers.com/9-lite/development/recovery-twrp-3-2-1-0-t3789306
if phone work set PIN for Screen-open (this PIN need TWRP by start for encrypt/decrypt "data")
if you need, you can now flash recovery_ramdisk TWRP.img
if you need install OTA-Updates : if OTA-Update on your phone "install update now ?" answer "NO, later" and
- fastboot flash recovery_ramdisk recovery_ramdis.img (stock-recovery)
and install Update now.
if all work and you need : flash TWRP
i hope you understand this "way"
the advantage : you can install with TWRP OR flash developer-system.img and if anything not work - reset phone to stock-rom
i use ONLY TWRP with encrypt. this is security-question. if phone lost - data is encrypt !
TWRP without encrypt work only
- boot to TWRP
- format data
- boot from TWRP to TWRP
- data have now NO encrypt
Click to expand...
Click to collapse
sir shall i go to service center i have warrenty
creativeanand said:
sir shall i go to service center i have warrenty
Click to expand...
Click to collapse
By unlocking the bootloader you've void your warranty.
They will probably charge you for the repair.
What happens if you install this version of TWRP?
It's on Chinese, click the little icon in the top right corner and select "English".
If it doesn't crash, try this one.
Make sure to follow the correct steps for flashing.
fastboot flash recovery_ramdisk [filename.img]
fastboot flash reboot
QUICKLY unplug USB and before it fully reboots, hold press Volume up key
If it fails, check out this guide:
https://forum.xda-developers.com/9-lite/how-to/guide-unbrick-device-recover-bootloop-t3772563
My hon or 9 lite is in teaming page and it won't open I have tried to update via erecOvery but it won't work and I cannot go to recovery mode please help me.
@Prabin99
what you build ?
what have you do before start the update ?
have you anything flashed ?