Related
Hi all,
I just like to share a problem and I need your advice.
I have a Huawei Honor 3C and wanted to upgrade to Android 4.4 Kitkat. I wanted to unlock the bootloader. I used SPFlashtool but forgot to remove the battery and an error occurred. The phone went out and never started after this. When I try attempting to restart, no sign of the phone. I tried all possible ways (volume + and power, volume - and power, ...) but nothing worked. I put it in charge to hope for a sign of life, but only a continuous vibration appears when charging and the screen remained desperately dark. :crying:
Is my phone dead? Is this a hard-brick? Is there a way to fix it?
Thank you in advance for any help or suggestions.
bayad said:
Hi all,
I just like to share a problem and I need your advice.
I have a Huawei Honor 3C and wanted to upgrade to Android 4.4 Kitkat. I wanted to unlock the bootloader. I used SPFlashtool but forgot to remove the battery and an error occurred. The phone went out and never started after this. When I try attempting to restart, no sign of the phone. I tried all possible ways (volume + and power, volume - and power, ...) but nothing worked. I put it in charge to hope for a sign of life, but only a continuous vibration appears when charging and the screen remained desperately dark. :crying:
Is my phone dead? Is this a hard-brick? Is there a way to fix it?
Thank you in advance for any help or suggestions.
Click to expand...
Click to collapse
Hi, at last have you resolve the problem? I've this problem with another huawei phone D;
darklife96 said:
Hi, at last have you resolve the problem? I've this problem with another huawei phone D;
Click to expand...
Click to collapse
Unfortunately, not yet :crying:
bayad said:
Unfortunately, not yet :crying:
Click to expand...
Click to collapse
T_T Not solutions? Any? :'(
bayad said:
Hi all,
I just like to share a problem and I need your advice.
I have a Huawei Honor 3C and wanted to upgrade to Android 4.4 Kitkat. I wanted to unlock the bootloader. I used SPFlashtool but forgot to remove the battery and an error occurred. The phone went out and never started after this. When I try attempting to restart, no sign of the phone. I tried all possible ways (volume + and power, volume - and power, ...) but nothing worked. I put it in charge to hope for a sign of life, but only a continuous vibration appears when charging and the screen remained desperately dark. :crying:
Is my phone dead? Is this a hard-brick? Is there a way to fix it?
Thank you in advance for any help or suggestions.
Click to expand...
Click to collapse
which Honor 3c you have? H30 U10? if is this, which is? Outdoor or Chinese? i have an metod to unbrick, chinese version, but i think dont work in outdoor.
Edward Briceño said:
which Honor 3c you have? H30 U10? if is this, which is? Outdoor or Chinese? i have an metod to unbrick, chinese version, but i think dont work in outdoor.
Click to expand...
Click to collapse
I have an Honor 3C H30-T00 and it's a chinese version. Can you give me the unbrick method please ?
Thank you in advance :good:
bayad said:
I have an Honor 3C H30-T00 and it's a chinese version. Can you give me the unbrick method please ?
Thank you in advance :good:
Click to expand...
Click to collapse
i think that if you brick you phone flashing you must have mediatek drivers, so i will skip this part, i cant post link here cause im new so i will send you metod for mp.
you must have an stock rom in dload folder in sd. if you have original version(which you device brought is much better.
Read carefully this thread, I think you will find solution (if you haven't found yet) good luck
-----------------------------------------------------------------------------------------------------------
FULL GUIDE to UNBRICK
1. Download your device specified SPFT flashable version of system from link above and My Honor 3C project files folder from same thread
2. Extract both zips (password for My Honor 3C project folder is "[email protected]" without quotes)
3. Run SPFlashTool
4. Click Scatter-loading and navigate to mt6582_Android_scatter.txt inside extracted ROM (system) folder
5. Then click Download and connect phone without battery
6. (only if it didn't work) Click Format and click button Format in right panel, connect phone witout battery, than repeat step 5.
kernel.killer said:
Read carefully this thread, I think you will find solution (if you haven't found yet) good luck
-----------------------------------------------------------------------------------------------------------
FULL GUIDE to UNBRICK
1. Download your device specified SPFT flashable version of system from link above and My Honor 3C project files folder from same thread
2. Extract both zips (password for My Honor 3C project folder is "[email protected]" without quotes)
3. Run SPFlashTool
4. Click Scatter-loading and navigate to mt6582_Android_scatter.txt inside extracted ROM (system) folder
5. Then click Download and connect phone without battery
6. (only if it didn't work) Click Format and click button Format in right panel, connect phone witout battery, than repeat step 5.
Click to expand...
Click to collapse
Any suggestion if not worked.
Fthebrick said:
Any suggestion if not worked.
Click to expand...
Click to collapse
for myself I have problem with imei unbrick with SPFT and flash the firmware b108 but I lost imei and I dont have a backup ... with mtk droid tools I created two new IMEI randomly but when I reboot the smartphone is lost again and with reset date return the new imei but I can not turn off the phone
I too having this problem
Any one there please help us?
Did you manage to fix it?
hard brick honor 3c
danialbehzadi said:
Did you manage to fix it?
Click to expand...
Click to collapse
I am also having same problem. no solution yet. all options tried in spflash tools still having "Obtain DRAM failed" error. any suggestion.
Most huawei devices (hard bricked) and show BROM error using spftools try this software by huawei.
https://www.dropbox.com/sh/qrl5vk82sx3s4ce/AABILCc-RJFE2Qlk3NoyvktQa?dl=0
if not worked in first time select another device from same generation and try on that then come back and try with same model
bayad said:
Hi all,
I just like to share a problem and I need your advice.
I have a Huawei Honor 3C and wanted to upgrade to Android 4.4 Kitkat. I wanted to unlock the bootloader. I used SPFlashtool but forgot to remove the battery and an error occurred. The phone went out and never started after this. When I try attempting to restart, no sign of the phone. I tried all possible ways (volume + and power, volume - and power, ...) but nothing worked. I put it in charge to hope for a sign of life, but only a continuous vibration appears when charging and the screen remained desperately dark. :crying:
Is my phone dead? Is this a hard-brick? Is there a way to fix it?
Thank you in advance for any help or suggestions.
Click to expand...
Click to collapse
Fixed it?
hassanjavaid8181 said:
Fixed it?
Click to expand...
Click to collapse
I have changed the phone since the problem and I no longer have the Huawei...
bayad said:
I have changed the phone since the problem and I no longer have the Huawei...
Click to expand...
Click to collapse
Which phone you bought next?
hassanjavaid8181 said:
Which phone you bought next?
Click to expand...
Click to collapse
I have a Samsung Galaxy A9 Pro SM-A9100 and it's really a great phone with great battery life
bayad said:
I have a Samsung Galaxy A9 Pro SM-A9100 and it's really a great phone with great battery life
Click to expand...
Click to collapse
Thats a really good device..enjoy buddy
hassanjavaid8181 said:
Thats a really good device..enjoy buddy
Click to expand...
Click to collapse
:good:
Hello everyone,
I tried to install a OTA update to nougat using SD system local update.
in 98% it's show error and loop in recovery...
i tried to install stock rom using fastboot get error..
using press (VOL+)+(VOL-) to enter update from SD and no success
my bootloader locked.
spec:
Found Phone : EVA-L09
IMEI : 869827028453054
Serial NR. : MWS0216719004568
Firmware : EVA-L09C671B150
Please if any one can help me bring back to life my p9.
sorry for my English.
There are several guides here how to get your P9 working again from such a state. Which have you tried?
Especially this is short and to the point: https://forum.xda-developers.com/showpost.php?p=71195544&postcount=4
Please be more verbose as to what you have done and which error messages and behaviour you see. That will enable others to understand what might be happening and how to help you.
tbr23 said:
There are several guides here how to get your P9 working again from such a state. Which have you tried?
Especially this is short and to the point: https://forum.xda-developers.com/showpost.php?p=71195544&postcount=4
Please be more verbose as to what you have done and which error messages and behaviour you see. That will enable others to understand what might be happening and how to help you.
Click to expand...
Click to collapse
always i have
FAILED (remote: Command not allowed) error message.
can you help me find the stock full firmware for my model?
this is my firmware now EVA-L09C671B150.
UP
Hi
I was in same situation, can't go to recovery, boot non stop on Huawei logo and I save my phone with DC Phoenix. You have to pay 15€ but that work perfectly
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Phiver13 said:
Hi
I was in same situation, can't go to recovery, boot non stop on Huawei logo and I save my phone with DC Phoenix. You have to pay 15€ but that work perfectly
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Click to expand...
Click to collapse
can you help me find Firmware for my p9?
steve19994 said:
can you help me find Firmware for my p9?
Click to expand...
Click to collapse
Easy
Follow the tutorial and don't forget to remove the sd card before starting
https://www.dc-unlocker.com/repair-bricked-huawei-honor-7
Do you have the P9 Eva-l09? If yes, take this one, unzip, put in DC Phoenix
http://www.modaco.com/forums/topic/377249-stock-rom-dload-file-p9-eva-l09-b136/
---------- Post added at 11:52 AM ---------- Previous post was at 11:52 AM ----------
steve19994 said:
can you help me find Firmware for my p9?
Click to expand...
Click to collapse
https://forum.xda-developers.com/p9/how-to/huawei-p9-deleted-t3380098/page3
After installing twrp recovery i decided to install SU too. After that my phone is stuck in bootloop, before SU installation it worked just fine (with just the twrp) ;[
So here's my phone info (all i could get):
Model: PRA-LX1 (other ppl place here some diffrent numbers but i dont know where to find them since i cant even start my phone)
FCC ID: QIPRA-LX1
Well if someone could find a stock frimewere (or pre-rooted custom rom that would work on this phone) and give a link to it i would be greatfull couse i searched a lot and i'm still with nothing.
Now im left with empty brick with no OS at all...
Help! ;[
Maybe you should try this, it may find the proper firmware for your device.
Firicel69 said:
Maybe you should try this, it may find the proper firmware for your device.
Click to expand...
Click to collapse
The problem is there are a ton of diffrent versions of this PRA-LX1 and i dont know which one to chose...
Wilchu said:
The problem is there are a ton of diffrent versions of this PRA-LX1 and i dont know which one to chose...
Click to expand...
Click to collapse
Wrong thread mate, open this in P9Lite not in P8Lite
If this is P8 Lite 2017, we have seperate subforum for it :highfive:
D1stRU3T0R said:
Wrong thread mate, open this in P9Lite not in P8Lite
Click to expand...
Click to collapse
... But this is P9 Lite "2017" and what i heard is that this model comes with name of P8 Lite 2017 and if im not wrong there is no P9 Lite "2017" thread just P9 Lite which is completly diffrent device!
Let's do this in a diffrent way...
If there is a person who owns the same phone and the same model PRA-LX1 which is the only thing written on the box,
then i ask you to do a twrp system backup and maybe give the file to me.
Wilchu said:
If there is a person who owns the same phone and the same model PRA-LX1 which is the only thing written on the box,
then i ask you to do a twrp system backup and maybe give the file to me.
Click to expand...
Click to collapse
https://forum.xda-developers.com/huawei-p9lite/development/rom-custom-rokangtex-rom-t3624816
I hope it's working.
D1stRU3T0R said:
https://forum.xda-developers.com/huawei-p9lite/development/rom-custom-rokangtex-rom-t3624816
I hope it's working.
Click to expand...
Click to collapse
Thanks! I'll test it out but i have another question is there a way to install rom through pc maybe couse twrp is acting weird and i dont trust it so much...
To be more precise i get updater error: 7 every time when i try to flash the rom
And after that phone booted but i got encryption error, and cant do much
Wilchu said:
Thanks! I'll test it out but i have another question is there a way to install rom through pc maybe couse twrp is acting weird and i dont trust it so much...
To be more precise i get updater error: 7 every time when i try to flash the rom
(but i will still try tho)
Click to expand...
Click to collapse
Yeah, with flash. Search universal flashboot anf than flash everything in order (these are not the orders, just an ex) flashboot boot boot.img flashboot recovery recovery.img etc(extracted from the zip file, maybr with huawei extractor)
But try to update you're TWRP, either to personas one or OpenKirin's TWRP, you should not have any problem on TWRP 3.1.1-0
Quick update nothing new, nothing works just gonna go to huwaei service room and hope that they can fix this... :[
Wilchu said:
Quick update nothing new, nothing works just gonna go to huwaei service room and hope that they can fix this... :[
Click to expand...
Click to collapse
Did you go to the P8 Lite 2017 thread? I think that device has the same model number
Wilchu said:
Quick update nothing new, nothing works just gonna go to huwaei service room and hope that they can fix this... :[
Click to expand...
Click to collapse
First.. i supose you have TWRP ...
So, if im not wrong, your phone use 3 files to install the firmware ( like P8 Lite 2017 )...
Must be like this:
Download the 3 zip files (update.zip, cust and public data) of the firmware you want to flash and copy them to your phone’s memory.
Unplug the USB cable and power off your device.
Now hold Vol up + Power keys for a few seconds to boot into TWRP mode.
In TWRP, go to Install and flash the update.zip package.
After that, install the remaining two update files (cust and then the public data package).
Wipe the dalvik cache( or do a factory reset ) and then reboot normally into the new system.
Now the ROM... i don´t know where you can find it, sorry ...
.
Hi guys, I used to have a p8 Lite 2017 and when the Oreo update came out only for the ALE-00X Honor models i rebranded my PRA-LX1, changing the OEMInfo and it booted like an Honor, so I put the Oreo update on it. Then I gave to my sister who used it for an year and now she asked me to update it. I tried installing several Pie/Oreo Treble roms however everything I try to install brings me to a continuous bootloop, even if I followed the instructions perfectly. Is it because of the rebranding I did time I go? How can I make it go back to its original stock state? I really need help in fixing this phone and any help would be gladly appreciated.
Please can someone help me? I don't know where to start to fix that bootloop..
raiden99 said:
Please can someone help me? I don't know where to start to fix that bootloop..
Click to expand...
Click to collapse
in brief, there is a options download stock firmware in erecovery by WiFi. Try, I always recover my huawei like this.
Or search about dload flashing method.
Good luck.
raiden99 said:
Hi guys, I used to have a p8 Lite 2017 and when the Oreo update came out only for the ALE-00X Honor models i rebranded my PRA-LX1, changing the OEMInfo and it booted like an Honor, so I put the Oreo update on it. Then I gave to my sister who used it for an year and now she asked me to update it. I tried installing several Pie/Oreo Treble roms however everything I try to install brings me to a continuous bootloop, even if I followed the instructions perfectly. Is it because of the rebranding I did time I go? How can I make it go back to its original stock state? I really need help in fixing this phone and any help would be gladly appreciated.
Click to expand...
Click to collapse
have you unbricked? can you help me ? i also have bricken phone
Hey everyone,
I'm using the Huawei Mate 20 Lite (C432 version)
I was running EMUI 9.1 and was trying to install EMUI 10 with the dload method with SD card. I used the 10.0.170 C432 firmware wich I found on androidhost.ru
The installation was succesfull, but now, when I boot the phone, I only shows a screen what says "your device had loaded a different software"
I tried everything, nothing works to restore the phone...
Had anyone got any ideas?
Thanks in advance!
ScottThijs said:
Hey everyone,
I'm using the Huawei Mate 20 Lite (C432 version)
I was running EMUI 9.1 and was trying to install EMUI 10 with the dload method with SD card. I used the 10.0.170 C432 firmware wich I found on androidhost.ru
The installation was succesfull, but now, when I boot the phone, I only shows a screen what says "your device had loaded a different software"
I tried everything, nothing works to restore the phone...
Had anyone got any ideas?
Thanks in advance!
Click to expand...
Click to collapse
Try to restore device original firmware via HiSuite app on PC
Kr3ker1s said:
Try to restore device original firmware via HiSuite app on PC
Click to expand...
Click to collapse
Thanks, but doesn't work
ScottThijs said:
Thanks, but doesn't work
Click to expand...
Click to collapse
It works, tried once, but don't want to repeat ??
Kr3ker1s said:
It works, tried once, but don't want to repeat ??
Click to expand...
Click to collapse
HiSuite claims that my device is not supported for recovery... (SNE-LX1 C432)
ScottThijs said:
HiSuite claims that my device is not supported for recovery... (SNE-LX1 C432)
Click to expand...
Click to collapse
Then brick it
Kr3ker1s said:
Then brick it
Click to expand...
Click to collapse
It's already bricked, I think ?
ScottThijs said:
It's already bricked, I think
Click to expand...
Click to collapse
Search some posts here, because i found here how to change software and restore it ?
ScottThijs said:
Hey everyone,
I'm using the Huawei Mate 20 Lite (C432 version)
I was running EMUI 9.1 and was trying to install EMUI 10 with the dload method with SD card. I used the 10.0.170 C432 firmware wich I found on androidhost.ru
The installation was succesfull, but now, when I boot the phone, I only shows a screen what says "your device had loaded a different software"
I tried everything, nothing works to restore the phone...
Had anyone got any ideas?
Thanks in advance!
Click to expand...
Click to collapse
Did you found a solution??? i have the same problem.